After the introduction of CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE_O3,
the wext code produces a bogus warning:
In function 'iw_handler_get_iwstats',
inlined from 'ioctl_standard_call' at net/wireless/wext-core.c:1015:9,
inlined from 'wireless_process_ioctl' at net/wireless/wext-core.c:935:10,
inlined from 'wext_ioctl_dispatch.part.8' at net/wireless/wext-core.c:986:8,
inlined from 'wext_handle_ioctl':
net/wireless/wext-core.c:671:3: error: argument 1 null where non-null expected [-Werror=nonnull]
memcpy(extra, stats, sizeof(struct iw_statistics));
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In file included from arch/x86/include/asm/string.h:5,
net/wireless/wext-core.c: In function 'wext_handle_ioctl':
arch/x86/include/asm/string_64.h:14:14: note: in a call to function 'memcpy' declared here
The problem is that ioctl_standard_call() sometimes calls the handler
with a NULL argument that would cause a problem for iw_handler_get_iwstats.
However, iw_handler_get_iwstats never actually gets called that way.
Marking that function as noinline avoids the warning and leads
to slightly smaller object code as well.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20200107200741.3588770-1-arnd@arndb.de
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
TKIP replay protection was skipped for the very first frame received
after a new key is configured. While this is potentially needed to avoid
dropping a frame in some cases, this does leave a window for replay
attacks with group-addressed frames at the station side. Any earlier
frame sent by the AP using the same key would be accepted as a valid
frame and the internal RSC would then be updated to the TSC from that
frame. This would allow multiple previously transmitted group-addressed
frames to be replayed until the next valid new group-addressed frame
from the AP is received by the station.
Fix this by limiting the no-replay-protection exception to apply only
for the case where TSC=0, i.e., when this is for the very first frame
protected using the new key, and the local RSC had not been set to a
higher value when configuring the key (which may happen with GTK).
Signed-off-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20200107153545.10934-1-j@w1.fi
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case a radar event of CAC_FINISHED or RADAR_DETECTED
happens during another phy is during CAC we might need
to cancel that CAC.
If we got a radar in a channel that another phy is now
doing CAC on then the CAC should be canceled there.
If, for example, 2 phys doing CAC on the same channels,
or on comptable channels, once on of them will finish his
CAC the other might need to cancel his CAC, since it is no
longer relevant.
To fix that the commit adds an callback and implement it in
mac80211 to end CAC.
This commit also adds a call to said callback if after a radar
event we see the CAC is no longer relevant
Signed-off-by: Orr Mazor <Orr.Mazor@tandemg.com>
Reviewed-by: Sergey Matyukevich <sergey.matyukevich.os@quantenna.com>
Link: https://lore.kernel.org/r/20191222145449.15792-1-Orr.Mazor@tandemg.com
[slightly reformat/reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Commit e33e2241e2 ("Revert "cfg80211: Use 5MHz bandwidth by
default when checking usable channels"") fixed a broken
regulatory (leaving channel 12 open for AP where not permitted).
Apply a similar fix to custom regulatory domain processing.
Signed-off-by: Cathy Luo <xiaohua.luo@nxp.com>
Signed-off-by: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Link: https://lore.kernel.org/r/1576836859-8945-1-git-send-email-ganapathi.bhat@nxp.com
[reword commit message, fix coding style, add a comment]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Final drm/i915 features for v5.6:
- DP MST fixes (José)
- Fix intel_bw_state memory leak (Pankaj Bharadiya)
- Switch context id allocation to xarray (Tvrtko)
- ICL/EHL/TGL workarounds (Matt Roper, Tvrtko)
- Debugfs for LMEM details (Lukasz Fiedorowicz)
- Prefer platform acronyms over codenames in symbols (Lucas)
- Tiled and port sync mode fixes for fbdev and DP (Manasi)
- DSI panel and backlight enable GPIO fixes (Hans de Goede)
- Relax audio min CDCLK requirements on non-GLK (Kai Vehmanen)
- Plane alignment and dimension check fixes (Imre)
- Fix state checks for PSR (José)
- Remove ICL+ clock gating programming (José)
- Static checker fixes around bool usage (Ma Feng)
- Bring back tests for self-contained headers in i915 (Masahiro Yamada)
- Fix DP MST disable sequence (Ville)
- Start converting i915 to the new drm device based logging macros (Wambui Karuga)
- Add DSI VBT I2C sequence execution (Vivek Kasireddy)
- Start using function pointers and ops structs in uc code (Michal)
- Fix PMU names to not use colons or dashes (Tvrtko)
- TGL media decompression support (DK, Imre)
- Split i915_gem_gtt.[ch] to more manageable chunks (Matthew Auld)
- Create dumb buffers in LMEM where available (Ram)
- Extend mmap support for LMEM (Abdiel)
- Selftest updates (Chris)
- Hack bump up CDCLK on TGL to avoid underruns (Stan)
- Use intel_encoder and intel_connector more instead of drm counterparts (Ville)
- Build error fixes (Zhang Xiaoxu)
- Fixes related to GPU and engine initialization/resume (Chris)
- Support for prefaulting discontiguous objects (Abdiel)
- Support discontiguous LMEM object maps (Chris)
- Various GEM and GT improvements and fixes (Chris)
- Merge pinctrl dependencies branch for the DSI GPIO updates (Jani)
- Backmerge drm-next for new logging macros (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/87sgkil0v9.fsf@intel.com
- Rewrite of the ACR (formerly "secure boot") code, both to support
Turing, support multiple FW revisions, and to make life easier when
having to debug HW/FW bring-up in the future
- Support for TU10x graphics engine, TU11x not available yet as FW isn't ready
- Proper page 'kind' mappings for Turing
- 10-bit LUT support
- GP10B (Tegra) fixes
- Misc other fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Ben Skeggs <skeggsb@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ <CACAvsv5GKasg9-hEUwp9+aHVJg+nbQ0LukXyudgj6=YKu96jWQ@mail.gmail.com
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=BXQH
-----END PGP SIGNATURE-----
Merge tag 'mediatek-drm-next-5.6' of https://github.com/ckhu-mediatek/linux.git-tags into drm-next
Mediatek DRM Next for Linux 5.6
This fix non-smooth cursor problem, add cmdq support, add ctm property
support and some refinement.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: CK Hu <ck.hu@mediatek.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1578972526.14594.8.camel@mtksdaap41
we need to reload ->d_flags after the call of ->d_manage() - the thing
might've been called with dentry still negative and have the damn thing
turned positive while we'd waited.
Fixes: d41efb522e "fs/namei.c: pull positivity check into follow_managed()"
Reported-by: Ian Kent <raven@themaw.net>
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
... and get rid of a bunch of bugs in it. Background:
the reason for path_mountpoint() is that umount() really doesn't
want attempts to revalidate the root of what it's trying to umount.
The thing we want to avoid actually happen from complete_walk();
solution was to do something parallel to normal path_lookupat()
and it both went overboard and got the boilerplate subtly
(and not so subtly) wrong.
A better solution is to do pretty much what the normal path_lookupat()
does, but instead of complete_walk() do unlazy_walk(). All it takes
to avoid that ->d_weak_revalidate() call... mountpoint_last() goes
away, along with everything it got wrong, and so does the magic around
LOOKUP_NO_REVAL.
Another source of bugs is that when we traverse mounts at the final
location (and we need to do that - umount . expects to get whatever's
overmounting ., if any, out of the lookup) we really ought to take
care of ->d_manage() - as it is, manual umount of autofs automount
in progress can lead to unpleasant surprises for the daemon. Easily
solved by using handle_lookup_down() instead of follow_mount().
Tested-by: Ian Kent <raven@themaw.net>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
This contains a small set of mostly fixes and some minor improvements.
-----BEGIN PGP SIGNATURE-----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=OBEv
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.6-rc1' of git://anongit.freedesktop.org/tegra/linux into drm-next
drm/tegra: Changes for v5.6-rc1
This contains a small set of mostly fixes and some minor improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200111004835.2412858-1-thierry.reding@gmail.com
If we pass back dependent work in case of links, we need to always
ensure that we call the link setup and work prep handler. If not, we
might be missing some setup for the next work item.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Ido Schimmel says:
====================
net: Add route offload indication
This patch set adds offload indication to IPv4 and IPv6 routes. So far
offload indication was only available for the nexthop via
'RTNH_F_OFFLOAD', which is problematic as a nexthop is usually shared
between multiple routes.
Based on feedback from Roopa and David on the RFC [1], the indication is
split to 'offload' and 'trap'. This is done because not all the routes
present in hardware actually offload traffic from the kernel. For
example, host routes merely trap packets to the kernel. The two flags
are dumped to user space via the 'rtm_flags' field in the ancillary
header of the rtnetlink message.
In addition, the patch set uses the new flags in order to test the FIB
offload API by adding a dummy FIB offload implementation to netdevsim.
The new tests are added to a shared library and can be therefore shared
between different drivers.
Patches #1-#3 add offload indication to IPv4 routes.
Patches #4 adds offload indication to IPv6 routes.
Patches #5-#6 add support for the offload indication in mlxsw.
Patch #7 adds dummy FIB offload implementation in netdevsim.
Patches #8-#10 add selftests.
v2 (feedback from David Ahern):
* Patch #2: Name last argument of fib_dump_info()
* Patch #2: Move 'struct fib_rt_info' to include/net/ip_fib.h so that it
could later be passed to fib_alias_hw_flags_set()
* Patch #3: Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set()
* Patch #6: Convert to new fib_alias_hw_flags_set() interface
* Patch #7: Convert to new fib_alias_hw_flags_set() interface
[1] https://patchwork.ozlabs.org/cover/1170530/
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The test reuses the common FIB offload tests in order to make sure that
mlxsw correctly implements FIB offload.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Test various aspects of the FIB offload API on top of the netdevsim
implementation. Both good and bad flows are tested.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement a set of common helpers and tests for FIB offload that can be
used by multiple drivers to check their FIB offload implementations.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement dummy IPv4 and IPv6 FIB "offload" in the driver by storing
currently "programmed" routes in a hash table. Each route in the hash
table is marked with "trap" indication. The indication is cleared when
the route is replaced or when the netdevsim instance is deleted.
This will later allow us to test the route offload API on top of
netdevsim.
v2:
* Convert to new fib_alias_hw_flags_set() interface
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Previous patches added support for two hardware flags for IPv4 and IPv6
routes: 'RTM_F_OFFLOAD' and 'RTM_F_TRAP'. Both indicate the presence of
the route in hardware. The first indicates that traffic is actually
offloaded from the kernel, whereas the second indicates that packets
hitting such routes are trapped to the kernel for processing (e.g., host
routes).
Use these two flags in mlxsw. The flags are modified in two places.
Firstly, whenever a route is updated in the device's table. This
includes the addition, deletion or update of a route. For example, when
a host route is promoted to perform NVE decapsulation, its action in the
device is updated, the 'RTM_F_OFFLOAD' flag set and the 'RTM_F_TRAP'
flag cleared.
Secondly, when a route is replaced and overwritten by another route, its
flags are cleared.
v2:
* Convert to new fib_alias_hw_flags_set() interface
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The driver currently uses the 'RTNH_F_OFFLOAD' flag for both routes and
nexthops, which is cumbersome and unnecessary now that we have separate
flag for the route itself.
Separate the offload indication for nexthops from routes and call it
whenever the offload state within the nexthop group changes.
Note that IPv6 (unlike IPv4) does not share the same nexthop group
between different routes, whereas mlxsw does. Therefore, whenever the
offload indication within an IPv6 nexthop group changes, all the linked
routes need to be updated.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a similar fashion to previous patch, add "offload" and "trap"
indication to IPv6 routes.
This is done by using two unused bits in 'struct fib6_info' to hold
these indications. Capable drivers are expected to set these when
processing the various in-kernel route notifications.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Roopa Prabhu <roopa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When performing L3 offload, routes and nexthops are usually programmed
into two different tables in the underlying device. Therefore, the fact
that a nexthop resides in hardware does not necessarily mean that all
the associated routes also reside in hardware and vice-versa.
While the kernel can signal to user space the presence of a nexthop in
hardware (via 'RTNH_F_OFFLOAD'), it does not have a corresponding flag
for routes. In addition, the fact that a route resides in hardware does
not necessarily mean that the traffic is offloaded. For example,
unreachable routes (i.e., 'RTN_UNREACHABLE') are programmed to trap
packets to the CPU so that the kernel will be able to generate the
appropriate ICMP error packet.
This patch adds an "offload" and "trap" indications to IPv4 routes, so
that users will have better visibility into the offload process.
'struct fib_alias' is extended with two new fields that indicate if the
route resides in hardware or not and if it is offloading traffic from
the kernel or trapping packets to it. Note that the new fields are added
in the 6 bytes hole and therefore the struct still fits in a single
cache line [1].
Capable drivers are expected to invoke fib_alias_hw_flags_set() with the
route's key in order to set the flags.
The indications are dumped to user space via a new flags (i.e.,
'RTM_F_OFFLOAD' and 'RTM_F_TRAP') in the 'rtm_flags' field in the
ancillary header.
v2:
* Make use of 'struct fib_rt_info' in fib_alias_hw_flags_set()
[1]
struct fib_alias {
struct hlist_node fa_list; /* 0 16 */
struct fib_info * fa_info; /* 16 8 */
u8 fa_tos; /* 24 1 */
u8 fa_type; /* 25 1 */
u8 fa_state; /* 26 1 */
u8 fa_slen; /* 27 1 */
u32 tb_id; /* 28 4 */
s16 fa_default; /* 32 2 */
u8 offload:1; /* 34: 0 1 */
u8 trap:1; /* 34: 1 1 */
u8 unused:6; /* 34: 2 1 */
/* XXX 5 bytes hole, try to pack */
struct callback_head rcu __attribute__((__aligned__(8))); /* 40 16 */
/* size: 56, cachelines: 1, members: 12 */
/* sum members: 50, holes: 1, sum holes: 5 */
/* sum bitfield members: 8 bits (1 bytes) */
/* forced alignments: 1, forced holes: 1, sum forced holes: 5 */
/* last cacheline: 56 bytes */
} __attribute__((__aligned__(8)));
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
fib_dump_info() is used to prepare RTM_{NEW,DEL}ROUTE netlink messages
using the passed arguments. Currently, the function takes 11 arguments,
6 of which are attributes of the route being dumped (e.g., prefix, TOS).
The next patch will need the function to also dump to user space an
indication if the route is present in hardware or not. Instead of
passing yet another argument, change the function to take a struct
containing the different route attributes.
v2:
* Name last argument of fib_dump_info()
* Move 'struct fib_rt_info' to include/net/ip_fib.h so that it could
later be passed to fib_alias_hw_flags_set()
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Subsequent patches will add an offload / trap indication to routes which
will signal if the route is present in hardware or not.
After programming the route to the hardware, drivers will have to ask
the IPv4 code to set the flags by passing the route's key.
In the case of route replace, the new route is notified before it is
actually inserted into the FIB alias list. This can prevent simple
drivers (e.g., netdevsim) that program the route to the hardware in the
same context it is notified in from being able to set the flag.
Solve this by first inserting the new route to the list and rollback the
operation in case the route was vetoed.
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Page pool API will start syncing (if requested) starting from
page->dma_addr + pool->p.offset. Fix dma sync length in
mvneta_run_xdp since we do not need to account xdp headroom
Fixes: 07e13edbb6 ("net: mvneta: get rid of huge dma sync in mvneta_rx_refill")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Socionext driver can run on dma coherent and non-coherent devices.
Get rid of huge dma_sync_single_for_device in netsec_alloc_rx_data since
now the driver can let page_pool API to managed needed DMA sync
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add missing endpoint sanity check to probe in order to prevent a
NULL-pointer dereference (or slab out-of-bounds access) when retrieving
the interrupt-endpoint bInterval on ndo_open() in case a device lacks
the expected endpoints.
Fixes: 40a82917b1 ("net/usb/r8152: enable interrupt transfer")
Cc: hayeswang <hayeswang@realtek.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Bjorn Andersson says:
====================
QRTR flow control improvements
In order to prevent overconsumption of resources on the remote side QRTR
implements a flow control mechanism.
Move the handling of the incoming confirm_rx to the receiving process to
ensure incoming flow is controlled. Then implement outgoing flow
control, using the recommended algorithm of counting outstanding
non-confirmed messages and blocking when hitting a limit. The last three
patches refactors the node assignment and port lookup, in order to
remove the worker in the receive path.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rather than enqueuing messages and scheduling a worker to deliver them
to the individual sockets we can now, thanks to the previous work, move
this directly into the endpoint callback.
This saves us a context switch per incoming message and removes the
possibility of an opportunistic suspend to happen between the message is
coming from the endpoint until it ends up in the socket's receive
buffer.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The important part of qrtr_port_lookup() wrt synchronization is that the
function returns a reference counted struct qrtr_sock, or fail.
As such we need only to ensure that an decrement of the object's
refcount happens inbetween the finding of the object in the idr and
qrtr_port_lookup()'s own increment of the object.
By using RCU and putting a synchronization point after we remove the
mapping from the idr, but before it can be released we achieve this -
with the benefit of not having to hold the mutex in qrtr_port_lookup().
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Move operations on the qrtr_nodes radix tree under a separate spinlock
and make the qrtr_nodes tree GFP_ATOMIC, to allow operation from atomic
context in a subsequent patch.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In order to prevent overconsumption of resources on the remote side QRTR
implements a flow control mechanism.
The mechanism works by the sender keeping track of the number of
outstanding unconfirmed messages that has been transmitted to a
particular node/port pair.
Upon count reaching a low watermark (L) the confirm_rx bit is set in the
outgoing message and when the count reaching a high watermark (H)
transmission will be blocked upon the reception of a resume_tx message
from the remote, that resets the counter to 0.
This guarantees that there will be at most 2H - L messages in flight.
Values chosen for L and H are 5 and 10 respectively.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The confirm-rx bit is used to implement a per port flow control, in
order to make sure that no messages are dropped due to resource
exhaustion. Move the resume-tx transmission to recvmsg to only confirm
messages as they are consumed by the application.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pktgen can use only one IPv6 source address from output device or src6
command setting. In pressure test we need create lots of sessions more
than 65535. So add src6_min and src6_max command to set the range.
Signed-off-by: Niu Xilei <niu_xilei@163.com>
Changes since v3:
- function set_src_in6_addr use static instead of static inline
- precompute min_in6_l,min_in6_h,max_in6_h,max_in6_l in setup time
Changes since v2:
- reword subject line
Changes since v1:
- only create IPv6 source address over least significant 64 bit range
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a configurable timeout mechanism to disable queue_if_no_path without
assistance from userspace multipathd. This reimplements multipathd's
no_path_retry mechanism in kernel space. This is motivated by the
desire to prevent processes from hanging indefinitely waiting for IO
in cases where multipathd might be unable to respond (after a failure
or for whatever reason).
Despite replicating userspace multipathd's policy configuration in
kernel space, it is important to prevent IOs from hanging forever,
waiting for userspace that may be incapable of behaving correctly.
Use of the provided "queue_if_no_path_timeout_secs" dm-multipath
module parameter is optional. This timeout mechanism is disabled by
default (by being set to 0).
Signed-off-by: Anatol Pomazau <anatol@google.com>
Co-developed-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
With commit fe64369163c5 ("dm thin: don't allow changing data device
during thin-pool load") it is now possible to re-parent the data
device's flush_bio from the pool_c to pool structure. Doing so offers
improved lifetime guarantees for the flush_bio so that the call to
dm_pool_register_pre_commit_callback can now be done safely from
pool_ctr().
Depends-on: fe64369163c5 ("dm thin: don't allow changing data device during thin-pool load")
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The existing code allows changing the data device when the thin-pool
target is reloaded.
This capability is not required and only complicates device lifetime
guarantees. This can cause crashes like the one reported here:
https://bugzilla.redhat.com/show_bug.cgi?id=1788596
where the kernel tries to issue a flush bio located in a structure that
was already freed.
Take the first step to simplifying the thin-pool's data device lifetime
by disallowing changing it. Like the thin-pool's metadata device, the
data device is now set in pool_create() and it cannot be changed for a
given thin-pool.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
dm-thin uses struct pool to hold the state of the pool. There may be
multiple pool_c's pointing to a given pool, each pool_c represents a
loaded target. pool_c's may be created and destroyed arbitrarily and the
pool contains a reference count of pool_c's pointing to it.
Since commit 694cfe7f31 ("dm thin: Flush data device before
committing metadata") a pointer to pool_c is passed to
dm_pool_register_pre_commit_callback and this function stores it in
pmd->pre_commit_context. If this pool_c is freed, but pool is not
(because there is another pool_c referencing it), we end up in a
situation where pmd->pre_commit_context structure points to freed
pool_c. It causes a crash in metadata_pre_commit_callback.
Fix this by moving the dm_pool_register_pre_commit_callback() from
pool_ctr() to pool_preresume(). This way the in-core thin-pool metadata
is only ever armed with callback data whose lifetime matches the
active thin-pool target.
In should be noted that this fix preserves the ability to load a
thin-pool table that uses a different data block device (that contains
the same data) -- though it is unclear if that capability is still
useful and/or needed.
Fixes: 694cfe7f31 ("dm thin: Flush data device before committing metadata")
Cc: stable@vger.kernel.org
Reported-by: Zdenek Kabelac <zkabelac@redhat.com>
Reported-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Ensure that the pool is locked during calls to __commit_transaction and
__destroy_persistent_data_objects. Just being consistent with locking,
but reality is dm_pool_metadata_close is called once pool is being
destroyed so access to pool shouldn't be contended.
Also, use pmd_write_lock_in_core rather than __pmd_write_lock in
dm_pool_commit_metadata and rename __pmd_write_lock to
pmd_write_lock_in_core -- there was no need for the alias.
In addition, verify that the pool is locked in __commit_transaction().
Fixes: 873f258bec ("dm thin metadata: do not write metadata if no changes occurred")
Cc: stable@vger.kernel.org
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
When committing state, the function writecache_flush does the following:
1. write metadata (writecache_commit_flushed)
2. flush disk cache (writecache_commit_flushed)
3. wait for data writes to complete (writecache_wait_for_ios)
4. increase superblock seq_count
5. write the superblock
6. flush disk cache
It may happen that at step 3, when we wait for some write to finish, the
disk may report the write as finished, but the write only hit the disk
cache and it is not yet stored in persistent storage. At step 5 we write
the superblock - it may happen that the superblock is written before the
write that we waited for in step 3. If the machine crashes, it may result
in incorrect data being returned after reboot.
In order to fix the bug, we must swap steps 2 and 3 in the above sequence,
so that we first wait for writes to complete and then flush the disk
cache.
Fixes: 48debafe4f ("dm: add writecache target")
Cc: stable@vger.kernel.org # 4.18+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If benbi IV is used in AEAD construction, for example:
cryptsetup luksFormat <device> --cipher twofish-xts-benbi --key-size 512 --integrity=hmac-sha256
the constructor uses wrong skcipher function and crashes:
BUG: kernel NULL pointer dereference, address: 00000014
...
EIP: crypt_iv_benbi_ctr+0x15/0x70 [dm_crypt]
Call Trace:
? crypt_subkey_size+0x20/0x20 [dm_crypt]
crypt_ctr+0x567/0xfc0 [dm_crypt]
dm_table_add_target+0x15f/0x340 [dm_mod]
Fix this by properly using crypt_aead_blocksize() in this case.
Fixes: ef43aa3806 ("dm crypt: add cryptographic data integrity protection (authenticated encryption)")
Cc: stable@vger.kernel.org # v4.12+
Link: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=941051
Reported-by: Jerad Simpson <jbsimpson@gmail.com>
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Add experimental support for BitLocker encryption with CBC mode and
additional Elephant diffuser.
The mode was used in older Windows systems and it is provided mainly
for compatibility reasons. The userspace support to activate these
devices is being added to cryptsetup utility.
Read-write activation of such a device is very simple, for example:
echo <password> | cryptsetup bitlkOpen bitlk_image.img test
The Elephant diffuser uses two rotations in opposite direction for
data (Diffuser A and B) and also XOR operation with Sector key over
the sector data; Sector key is derived from additional key data. The
original public documentation is available here:
http://download.microsoft.com/download/0/2/3/0238acaf-d3bf-4a6d-b3d6-0a0be4bbb36e/bitlockercipher200608.pdf
The dm-crypt implementation is embedded to "elephant" IV (similar to
tcw IV construction).
Because we cannot modify original bio data for write (before
encryption), an additional internal flag to pre-process data is
added.
Signed-off-by: Milan Broz <gmazyland@gmail.com>
Reviewed-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
The space-maps track the reference counts for disk blocks allocated by
both the thin-provisioning and cache targets. There are variants for
tracking metadata blocks and data blocks.
Transactionality is implemented by never touching blocks from the
previous transaction, so we can rollback in the event of a crash.
When allocating a new block we need to ensure the block is free (has
reference count of 0) in both the current and previous transaction.
Prior to this fix we were doing this by searching for a free block in
the previous transaction, and relying on a 'begin' counter to track
where the last allocation in the current transaction was. This
'begin' field was not being updated in all code paths (eg, increment
of a data block reference count due to breaking sharing of a neighbour
block in the same btree leaf).
This fix keeps the 'begin' field, but now it's just a hint to speed up
the search. Instead the current transaction is searched for a free
block, and then the old transaction is double checked to ensure it's
free. Much simpler.
This fixes reports of sm_disk_new_block()'s BUG_ON() triggering when
DM thin-provisioning's snapshots are heavily used.
Reported-by: Eric Wheeler <dm-devel@lists.ewheeler.net>
Cc: stable@vger.kernel.org
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
