Unlike gcc, clang considers each inline assembly block to be independent
and therefore, when using the integrated assembler for inline assembly,
any preambles that enable features must be repeated in each block.
This change defines __LSE_PREAMBLE and adds it to each inline assembly
block that has LSE instructions, which allows them to be compiled also
with clang's assembler.
Link: https://github.com/ClangBuiltLinux/linux/issues/671
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Tested-by: Andrew Murray <andrew.murray@arm.com>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Andrew Murray <andrew.murray@arm.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
For now mainly used in the Raspberry Pi 4.
Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Both snd_pcm_hw_constraints_init() and _complete() functions are
called only from pcm_native.c, hence they can be static for further
optimization.
Link: https://lore.kernel.org/r/20200116162825.24792-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
AD HD-audio codec driver has a few code lines invoking
snd_get_num_conns() and using its return value as the array index
without checking. This is basically safe in all those places; at the
second and later calls snd_get_num_conns() returns the value cached
from the first invocation, hence the value is always consistent.
However, it looks a bit confusing as if a lack of the proper check.
This patch introduces a new field num_smux_conns in ad198x_spec for
simplifying the code. Now we store and refer to the value more
locally without invoking the extra function at each time.
Reported-by: Colin King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20200115100035.22511-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
In general, "pvt->umc != NULL" is used to check if the system is Family
17h+. However, there are a few places that are using direct family
checks.
Replace the remaining family checks with a check for "pvt->umc != NULL".
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-6-Yazen.Ghannam@amd.com
Add family ops to support AMD Family 19h systems. Existing Family 17h
functions can be used. Also, add Family 19h to the list of families to
automatically load the module.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-5-Yazen.Ghannam@amd.com
Add the new PCI Device 18h IDs for AMD Family 19h systems. Note that
Family 19h systems will not have a new PCI root device ID.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-4-Yazen.Ghannam@amd.com
MCA error decoding on SMCA systems is not dependent on family. Return
success early if the system supports the SMCA feature.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-3-Yazen.Ghannam@amd.com
Add support for a new version of the Load Store unit bank type as
indicated by its McaType value, which will be present in future SMCA
systems.
Add the new (HWID, MCATYPE) tuple. Reuse the same name, since this is
logically the same to the user.
Also, add the new error descriptions to edac_mce_amd.
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Link: https://lkml.kernel.org/r/20200110015651.14887-2-Yazen.Ghannam@amd.com
When log recovery is processing buffer log items, we should check that
the incoming iovec actually describes a region of memory large enough to
contain the log format and the dirty map.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Increase XFS_BLF_DATAMAP_SIZE by 1 to fill in the implied padding at the
end of struct xfs_buf_log_format. This makes the size consistent so
that we can check it in xfs_ondisk.h, and will be needed once we start
logging attribute values.
On amd64 we get the following pahole:
struct xfs_buf_log_format {
short unsigned int blf_type; /* 0 2 */
short unsigned int blf_size; /* 2 2 */
short unsigned int blf_flags; /* 4 2 */
short unsigned int blf_len; /* 6 2 */
long long int blf_blkno; /* 8 8 */
unsigned int blf_map_size; /* 16 4 */
unsigned int blf_data_map[16]; /* 20 64 */
/* --- cacheline 1 boundary (64 bytes) was 20 bytes ago --- */
/* size: 88, cachelines: 2, members: 7 */
/* padding: 4 */
/* last cacheline: 24 bytes */
};
But on i386 we get the following:
struct xfs_buf_log_format {
short unsigned int blf_type; /* 0 2 */
short unsigned int blf_size; /* 2 2 */
short unsigned int blf_flags; /* 4 2 */
short unsigned int blf_len; /* 6 2 */
long long int blf_blkno; /* 8 8 */
unsigned int blf_map_size; /* 16 4 */
unsigned int blf_data_map[16]; /* 20 64 */
/* --- cacheline 1 boundary (64 bytes) was 20 bytes ago --- */
/* size: 84, cachelines: 2, members: 7 */
/* last cacheline: 20 bytes */
};
Notice how the amd64 compiler inserts 4 bytes of padding to the end of
the structure to ensure 8-byte alignment. Prior to "xfs: fix memory
corruption during remote attr value buffer invalidation" we would try to
write to blf_data_map[17], which is harmless on amd64 but really bad on
i386.
This shouldn't cause any changes in the ondisk logging formats because
the log code writes out the log vectors with the appropriate size for
the log item's map_size, and log recovery treats the data_map array as a
VLA.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Complain if someone calls xfs_buf_item_init on a buffer that is larger
than the dirty bitmap can handle, or tries to log a region that's past
the end of the dirty bitmap.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
The only thing that can cause a nonzero return from
xfs_buf_item_get_format is if the kmem_alloc fails, which it can't.
Get rid of all the unnecessary error handling.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Now that we know we don't have to take a transaction to stale the incore
buffers for a remote value, get rid of the unnecessary memory allocation
in the leaf walker and call the rmt_stale function directly. Flatten
the loop while we're at it.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
While running generic/103, I observed what looks like memory corruption
and (with slub debugging turned on) a slub redzone warning on i386 when
inactivating an inode with a 64k remote attr value.
On a v5 filesystem, maximally sized remote attr values require one block
more than 64k worth of space to hold both the remote attribute value
header (64 bytes). On a 4k block filesystem this results in a 68k
buffer; on a 64k block filesystem, this would be a 128k buffer. Note
that even though we'll never use more than 65,600 bytes of this buffer,
XFS_MAX_BLOCKSIZE is 64k.
This is a problem because the definition of struct xfs_buf_log_format
allows for XFS_MAX_BLOCKSIZE worth of dirty bitmap (64k). On i386 when we
invalidate a remote attribute, xfs_trans_binval zeroes all 68k worth of
the dirty map, writing right off the end of the log item and corrupting
memory. We've gotten away with this on x86_64 for years because the
compiler inserts a u32 padding on the end of struct xfs_buf_log_format.
Fortunately for us, remote attribute values are written to disk with
xfs_bwrite(), which is to say that they are not logged. Fix the problem
by removing all places where we could end up creating a buffer log item
for a remote attribute value and leave a note explaining why. Next,
replace the open-coded buffer invalidation with a call to the helper we
created in the previous patch that does better checking for bad metadata
before marking the buffer stale.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Hoist the code that invalidates remote extended attribute value buffers
into a separate helper function. This prepares us for a memory
corruption fix in the next patch.
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Commit 60e4cf67a5 (reiserfs: fix extended attributes on the root
directory) introduced a regression open_xa_root started returning
-EOPNOTSUPP but it was not handled properly in reiserfs_for_each_xattr.
When the reiserfs module is built without CONFIG_REISERFS_FS_XATTR,
deleting an inode would result in a warning and chowning an inode
would also result in a warning and then fail to complete.
With CONFIG_REISERFS_FS_XATTR enabled, the xattr root would always be
present for read-write operations.
This commit handles -EOPNOSUPP in the same way -ENODATA is handled.
Fixes: 60e4cf67a5 ("reiserfs: fix extended attributes on the root directory")
CC: stable@vger.kernel.org # Commit 60e4cf67a5 was picked up by stable
Link: https://lore.kernel.org/r/20200115180059.6935-1-jeffm@suse.com
Reported-by: Michael Brunnbauer <brunni@netestate.de>
Signed-off-by: Jeff Mahoney <jeffm@suse.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Apparently there exist certain workloads which rely heavily on software
checksumming, for which the generic do_csum() implementation becomes a
significant bottleneck. Therefore let's give arm64 its own optimised
version - for ease of maintenance this foregoes assembly or intrisics,
and is thus not actually arm64-specific, but does rely heavily on C
idioms that translate well to the A64 ISA and the typical load/store
capabilities of most ARMv8 CPU cores.
The resulting increase in checksum throughput scales nicely with buffer
size, tending towards 4x for a small in-order core (Cortex-A53), and up
to 6x or more for an aggressive big core (Ampere eMAG).
Reported-by: Lingyan Huang <huanglingyan2@huawei.com>
Tested-by: Lingyan Huang <huanglingyan2@huawei.com>
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Will Deacon <will@kernel.org>
Hitherto nft_bitwise has only supported boolean operations: NOT, AND, OR
and XOR. Extend it to do shifts as well.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new bitwise netlink attribute that will be used by shift
operations to store the size of the shift. It is not used by boolean
operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Only boolean operations supports offloading, so check the type of the
operation and return an error for other types.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Split the code specific to dumping bitwise boolean operations out into a
separate function. A similar function will be added later for shift
operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Split the code specific to evaluating bitwise boolean operations out
into a separate function. Similar functions will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Split the code specific to initializing bitwise boolean operations out
into a separate function. A similar function will be added later for
shift operations.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add a new bitwise netlink attribute, NFTA_BITWISE_OP, which is set to a
value of a new enum, nft_bitwise_ops. It describes the type of
operation an expression contains. Currently, it only has one value:
NFT_BITWISE_BOOL. More values will be added later to implement shifts.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
When dumping a bitwise expression, if any of the puts fails, we use goto
to jump to a label. However, no clean-up is required and the only
statement at the label is a return. Drop the goto's and return
immediately instead.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
In later patches, we will be adding more checks. In order to be
consistent and prevent complaints from checkpatch.pl, replace the
existing comparisons with NULL with logical NOT operators.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Indentation fixes for the parameters of a few nft functions.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
no need, just use a simple boolean to indicate we want to reap all
entries.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If nf_flow_offload_add() fails to add the flow to hardware, then the
NF_FLOW_HW_REFRESH flag bit is set and the flow remains in the flowtable
software path.
If flowtable hardware offload is enabled, this patch enqueues a new
request to offload this flow to hardware.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This function checks for the NF_FLOWTABLE_HW_OFFLOAD flag, meaning that
the flowtable hardware offload is enabled.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Originally, all flow flag bits were set on only from the workqueue. With
the introduction of the flow teardown state and hardware offload this is
no longer true. Let's be safe and use atomic bitwise operation to
operation with flow flags.
Fixes: 59c466dd68 ("netfilter: nf_flow_table: add a new flow state for tearing down offloading")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The dying bit removes the conntrack entry if the netdev that owns this
flow is going down. Instead, use the teardown mechanism to push back the
flow to conntrack to let the classic software path decide what to do
with it.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Add helper function to allocate and initialize flow offload work and use
it to consolidate existing code.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Set on FLOW_DISSECTOR_KEY_META meta key using flow tuple ingress interface.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Do not fetch statistics if flow has expired since it might not in
hardware anymore. After this update, remove the FLOW_OFFLOAD_HW_DYING
check from nf_flow_offload_stats() since this flag is never set on.
Fixes: c29f74e0df ("netfilter: nf_flow_table: hardware offload support")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Acked-by: wenxu <wenxu@ucloud.cn>
The comment documenting how bitwise expressions work includes a table
which summarizes the mask and xor arguments combined to express the
supported boolean operations. However, the row for OR:
mask xor
0 x
is incorrect.
dreg = (sreg & 0) ^ x
is not equivalent to:
dreg = sreg | x
What the code actually does is:
dreg = (sreg & ~x) ^ x
Update the documentation to match.
Signed-off-by: Jeremy Sowden <jeremy@azazel.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
bpf_attr doesn't required to be declared with '= {}' as memset is used
in the code.
Fixes: 2ab3d86ea1 ("libbpf: Add libbpf support to batch ops")
Reported-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Brian Vazquez <brianvv@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20200116045918.75597-1-brianvv@google.com
Add code to check if memory intended for RDMA is FS-DAX-memory. RDS
will fail with error code EOPNOTSUPP if FS-DAX-memory is detected.
Signed-off-by: Hans Westgaard Ry <hans.westgaard.ry@oracle.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@oracle.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Till recently it was not possible for userspace to specify a different
IOVA, but with the new ibv_reg_mr_iova() library call this can be done.
To compute the user_va we must compute:
user_va = (iova - iova_start) + user_va_start
while being cautious of overflow and other math problems.
The iova is not reliably stored in the mmkey when the MR is created. Only
the cached creation path (the common one) set it, so it must also be set
when creating uncached MRs.
Fix the weird use of iova when computing the starting page index in the
MR. In the normal case, when iova == umem.address:
iova & (~(BIT(page_shift) - 1)) ==
ALIGN_DOWN(umem.address, odp->page_size) ==
ib_umem_start(odp)
And when iova is different using it in math with a user_va is wrong.
Finally, do not allow an implicit ODP to be created with a non-zero IOVA
as we have no support for that.
Fixes: 7bdf65d411 ("IB/mlx5: Handle page faults")
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
The ODP handler for WQEs in RQ or SRQ is not implented for kernel QPs.
Therefore don't report support in these if query comes from a kernel user.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
One of the steps in ODP page fault handler for WQEs is to read a WQE
from a QP send queue or receive queue buffer at a specific index.
Since the implementation of this buffer is different between kernel and
user QP the implementation of the handler needs to be aware of that and
handle it in a different way.
ODP for kernel MRs is currently supported only for RDMA_READ
and RDMA_WRITE operations so change the handler to
- read a WQE from a kernel QP send queue
- fail if access to receive queue or shared receive queue is
required for a kernel QP
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Allow ULPs to call advise_mr, so they can control ODP regions
in the same way as user space applications.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Add ib_reg_user_mr() for kernel ULPs to register user MRs.
The common use case that uses this function is a userspace application
that allocates memory for HCA access but the responsibility to register
the memory at the HCA is on an kernel ULP. This ULP that acts as an agent
for the userspace application.
This function is intended to be used without a user context so vendor
drivers need to be aware of calling reg_user_mr() device operation with
udata equal to NULL.
Among all drivers, i40iw is the only driver which relies on presence
of udata, so check udata existence for that driver.
Signed-off-by: Moni Shoua <monis@mellanox.com>
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
So far the assumption was that ib_umem_get() and ib_umem_odp_get()
are called from flows that start in UVERBS and therefore has a user
context. This assumption restricts flows that are initiated by ULPs
and need the service that ib_umem_get() provides.
This patch changes ib_umem_get() and ib_umem_odp_get() to get IB device
directly by relying on the fact that both UVERBS and ULPs sets that
field correctly.
Reviewed-by: Guy Levi <guyle@mellanox.com>
Signed-off-by: Moni Shoua <monis@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
