Since find_fsid_inprogress should also handle the case in which an fs
didn't change its FSID make it call find_fsid directly. This makes the
code in device_list_add simpler by eliminating a conditional call of
find_fsid. No functional changes.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Su Yue <Damenly_Su@gmx.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Recently fsstress (from fstests) sporadically started to trigger an
infinite loop during fsync operations. This turned out to be because
support for the rename exchange and whiteout operations was added to
fsstress in fstests. These operations, unlike any others in fsstress,
cause file names to be reused, whence triggering this issue. However
it's not necessary to use rename exchange and rename whiteout operations
trigger this issue, simple rename operations and file creations are
enough to trigger the issue.
The issue boils down to when we are logging inodes that conflict (that
had the name of any inode we need to log during the fsync operation), we
keep logging them even if they were already logged before, and after
that we check if there's any other inode that conflicts with them and
then add it again to the list of inodes to log. Skipping already logged
inodes fixes the issue.
Consider the following example:
$ mkfs.btrfs -f /dev/sdb
$ mount /dev/sdb /mnt
$ mkdir /mnt/testdir # inode 257
$ touch /mnt/testdir/zz # inode 258
$ ln /mnt/testdir/zz /mnt/testdir/zz_link
$ touch /mnt/testdir/a # inode 259
$ sync
# The following 3 renames achieve the same result as a rename exchange
# operation (<rename_exchange> /mnt/testdir/zz_link to /mnt/testdir/a).
$ mv /mnt/testdir/a /mnt/testdir/a/tmp
$ mv /mnt/testdir/zz_link /mnt/testdir/a
$ mv /mnt/testdir/a/tmp /mnt/testdir/zz_link
# The following rename and file creation give the same result as a
# rename whiteout operation (<rename_whiteout> zz to a2).
$ mv /mnt/testdir/zz /mnt/testdir/a2
$ touch /mnt/testdir/zz # inode 260
$ xfs_io -c fsync /mnt/testdir/zz
--> results in the infinite loop
The following steps happen:
1) When logging inode 260, we find that its reference named "zz" was
used by inode 258 in the previous transaction (through the commit
root), so inode 258 is added to the list of conflicting indoes that
need to be logged;
2) After logging inode 258, we find that its reference named "a" was
used by inode 259 in the previous transaction, and therefore we add
inode 259 to the list of conflicting inodes to be logged;
3) After logging inode 259, we find that its reference named "zz_link"
was used by inode 258 in the previous transaction - we add inode 258
to the list of conflicting inodes to log, again - we had already
logged it before at step 3. After logging it again, we find again
that inode 259 conflicts with him, and we add again 259 to the list,
etc - we end up repeating all the previous steps.
So fix this by skipping logging of conflicting inodes that were already
logged.
Fixes: 6b5fc433a7 ("Btrfs: fix fsync after succession of renames of different files")
CC: stable@vger.kernel.org # 5.1+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we abort a transaction we have the following sequence
if (!trans->dirty && list_empty(&trans->new_bgs))
return;
WRITE_ONCE(trans->transaction->aborted, err);
The idea being if we didn't modify anything with our trans handle then
we don't really need to abort the whole transaction, maybe the other
trans handles are fine and we can carry on.
However in the case of create_snapshot we add a pending_snapshot object
to our transaction and then commit the transaction. We don't actually
modify anything. sync() behaves the same way, attach to an existing
transaction and commit it. This means that if we have an IO error in
the right places we could abort the committing transaction with our
trans->dirty being not set and thus not set transaction->aborted.
This is a problem because in the create_snapshot() case we depend on
pending->error being set to something, or btrfs_commit_transaction
returning an error.
If we are not the trans handle that gets to commit the transaction, and
we're waiting on the commit to happen we get our return value from
cur_trans->aborted. If this was not set to anything because sync() hit
an error in the transaction commit before it could modify anything then
cur_trans->aborted would be 0. Thus we'd return 0 from
btrfs_commit_transaction() in create_snapshot.
This is a problem because we then try to do things with
pending_snapshot->snap, which will be NULL because we didn't create the
snapshot, and then we'll get a NULL pointer dereference like the
following
"BUG: kernel NULL pointer dereference, address: 00000000000001f0"
RIP: 0010:btrfs_orphan_cleanup+0x2d/0x330
Call Trace:
? btrfs_mksubvol.isra.31+0x3f2/0x510
btrfs_mksubvol.isra.31+0x4bc/0x510
? __sb_start_write+0xfa/0x200
? mnt_want_write_file+0x24/0x50
btrfs_ioctl_snap_create_transid+0x16c/0x1a0
btrfs_ioctl_snap_create_v2+0x11e/0x1a0
btrfs_ioctl+0x1534/0x2c10
? free_debug_processing+0x262/0x2a3
do_vfs_ioctl+0xa6/0x6b0
? do_sys_open+0x188/0x220
? syscall_trace_enter+0x1f8/0x330
ksys_ioctl+0x60/0x90
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x4a/0x1b0
In order to fix this we need to make sure anybody who calls
commit_transaction has trans->dirty set so that they properly set the
trans->transaction->aborted value properly so any waiters know bad
things happened.
This was found while I was running generic/475 with my modified
fsstress, it reproduced within a few runs. I ran with this patch all
night and didn't see the problem again.
CC: stable@vger.kernel.org # 4.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fsync on a subvolume and create a log root for that volume, and
then later delete that subvolume we'll never clean up its log root. Fix
this by making switch_commit_roots free the log for any dropped roots we
encounter. The extra churn is because we need a btrfs_trans_handle, not
the btrfs_transaction.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
New sysfs attributes that track the filesystem status of devices, stored
in the per-filesystem directory in /sys/fs/btrfs/FSID/devinfo . There's
a directory for each device, with name corresponding to the numerical
device id.
in_fs_metadata - device is in the list of fs metadata
missing - device is missing (no device node or block device)
replace_target - device is target of replace
writeable - writes from fs are allowed
These attributes reflect the state of the device::dev_state and created
at mount time.
Sample output:
$ pwd
/sys/fs/btrfs/6e1961f1-5918-4ecc-a22f-948897b409f7/devinfo/1/
$ ls
in_fs_metadata missing replace_target writeable
$ cat missing
0
The output from these attributes are 0 or 1. 0 indicates unset and 1
indicates set. These attributes are readonly.
It is observed that the device delete thread and sysfs read thread will
not race because the delete thread calls sysfs kobject_put() which in
turn waits for existing sysfs read to complete.
Note for device replace devid swap:
During the replace the target device temporarily assumes devid 0 before
assigning the devid of the soruce device.
In btrfs_dev_replace_finishing() we remove source sysfs devid using the
function btrfs_sysfs_remove_devices_attr(), so after that call
kobject_rename() to update the devid in the sysfs. This adds and calls
btrfs_sysfs_update_devid() helper function to update the device id.
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Move variables to appropriate scope. Remove last BUG_ON in the function
and rework error handling accordingly. Make the duplicate detection code
more straightforward. Use in_range macro. And give variables more
descriptive name by explicitly distinguishing between IO stripe size
(size recorded in the chunk item) and data stripe size (the size of
an actual stripe, constituting a logical chunk/block group).
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add RAID1 and single testcases to verify that data stripes are excluded
from super block locations and that the address mapping is valid.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Add basic infrastructure to create and link dummy btrfs_devices. This
will be used in the pending btrfs_rmap_block test which deals with
the block groups.
Calling btrfs_alloc_dummy_device will link the newly created device to
the passed fs_info and the test framework will free them once the test
is finished.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
It's used only during initial block group reading to map physical
address of super block to a list of logical ones. Make it private to
block-group.c, add proper kernel doc and ensure it's exported only for
tests.
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There's a report where objtool detects unreachable instructions, eg.:
fs/btrfs/ctree.o: warning: objtool: btrfs_search_slot()+0x2d4: unreachable instruction
This seems to be a false positive due to compiler version. The cause is
in the ASSERT macro implementation that does the conditional check as
IS_DEFINED(CONFIG_BTRFS_ASSERT) and not an #ifdef.
To avoid that, use the ifdefs directly.
There are still 2 reports that aren't fixed:
fs/btrfs/extent_io.o: warning: objtool: __set_extent_bit()+0x71f: unreachable instruction
fs/btrfs/relocation.o: warning: objtool: find_data_references()+0x4e0: unreachable instruction
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: David Sterba <dsterba@suse.com>
We can now probe devices with device tree only configuration using
ti-sysc interconnect target module driver. Let's configure the
module, but keep the legacy "ti,hwmods" peroperty to avoid new boot
time warnings. The legacy property will be removed in later patches
together with the legacy platform data.
Cc: Tero Kristo <t-kristo@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This is similar to dra7 and omap4 with different clock naming
and module address.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Add RNG interconnect data for omap4 similar to what dra7 has. The
clock is OMAP4_CM_L4SEC_RNG_CLKCTRL_OFFSET at offset address 0x01c0,
which matches what dra7 also has with DRA7_L4SEC_CLKCTRL_INDEX(0x1c0).
Note that we need to also add the related l4_secure clock entries.
I've only added RNG, the others can be added as they get tested.
They are probably very similar to what we already have for dra7
in dra7_l4sec_clkctrl_regs[].
With the clock tagged CLKF_SOC_NONSEC, clock is set disabled for secure
devices and clk_get() will fail. Additionally we disable the RNG target
module on droid4 to avoid introducing new boot time warnings.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The secure clocks on omap5 are similar to what we already have for dra7
with dra7_l4sec_clkctrl_regs and documented in the omap5432 TRM in
"Table 3-1044. CORE_CM_CORE Registers Mapping Summary".
The secure clocks are part of the l4per clock manager. As the l4per
clock manager has now two clock domains as children, let's also update
the l4per clockdomain node name to follow the "clock" node naming with
a domain specific compatible property.
Compared to omap4, omap5 has more clocks working in hardare autogating
mode.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
The secure clocks on omap4 are similar to what we already have for dra7
in dra7_l4sec_clkctrl_regs and documented in the omap4460 TRM "Table
3-1346 L4PER_CM2 Registers Mapping Summary".
The secure clocks are part of the l4_per clock manager. As the l4_per
clock manager has now two clock domains as children, let's also update
the l4_per clockdomain node name to follow the "clock" node naming with
a domain specific compatible property.
Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Set d0 and d1 pin directions for spi0 and spi1 as per their pinmux.
Signed-off-by: Raag Jadav <raagjadav@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
omap_secure_init() is now called from all OMAP2+ platforms during their
init_early() call. This function is in omap-secure.o so include that
in the build for these platforms.
Fixes: db711893ea ("ARM: OMAP2+: Add omap_secure_init callback hook for secure initialization")
Reported-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Andrew F. Davis <afd@ti.com>
Tested-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
This patch is to replace Tien Hock Loh as Altera PIO maintainer as he
has moved to a different role.
Signed-off-by: Ooi, Joyce <joyce.ooi@intel.com>
Link: https://lore.kernel.org/r/20200103170155.100743-1-joyce.ooi@intel.com
Acked-by: Tien Hock Loh <tien.hock.loh@intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If a driver consuming the GPIO chip is being probed at the same time as
the GPIO driver is registering the chip, it is possible for the
consuming driver to see the ->descs array in an uninitialised state.
For example, the gpio-keys-polled driver can fail like this:
kernel: gpiod_request: invalid GPIO (no device)
kernel: gpio-keys-polled PRP0001:07: failed to get gpio: -22
kernel: gpio-keys-polled: probe of PRP0001:07 failed with error -22
This patch makes gpiochip_add() hold the lock protecting gpio_devices
until it has finished setting desc->gdev on the newly inserted list
entry.
Signed-off-by: Dan Callaghan <dan.callaghan@opengear.com>
Link: https://lore.kernel.org/r/20200121001216.15964-1-dan.callaghan@opengear.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
platform_irq_count() and platform_get_irq() is the more generic
way (independent of device trees) to determine the count of available
interrupts. So use this instead.
As platform_irq_count() might return an error code (which
of_irq_count doesn't) some additional handling is necessary.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://lore.kernel.org/r/1576672860-14420-1-git-send-email-peng.fan@nxp.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
gpiochip_set_chained_irqchip() would assign a chained handler
to a GPIO chip. We now populate struct gpio_irq_chip for all
chained GPIO irqchips so drop this function.
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20200113220800.77817-1-linus.walleij@linaro.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
When input GPIO set from 0 to 1, the interrupt bit asserted in the GPIO
Interrupt Cause Register (ICR) even if the corresponding interrupt
masked in the GPIO Interrupt Mask Register.
Because interrupt mask register only affects assertion of the interrupt
bits in Main Interrupt Cause Register and it does not affect the
setting of bits in the GPIO ICR.
So, there is problem, when we unmask interrupt with already
asserted bit in the GPIO ICR, then false interrupt immediately occurs
even if GPIO don't change their value since last unmask.
Signed-off-by: Maxim Kiselev <bigunclemax@gmail.com>
Link: https://lore.kernel.org/r/20200115073811.24438-1-bigunclemax@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The Imgu acronyms are moved from header file into Document by previous
commit b8726aea59 ("media: ipu3: update meta format documentation"), so
the item can be removed from TODO list now.
[Sakari Ailus: Use commit [0-9a-f]{12} plus subject]
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Print the node name during endpoint parsing for better debuggability.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Add the pinctrl driver support for i.MX8MP.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/1579052348-32167-2-git-send-email-Anson.Huang@nxp.com
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This reverts commit e878742c83.
Imgu should still keep the capability and flexibility to allow user to
run 2 video pipes, as the user may use the video pipe to capture still
frames with less system load and power than still pipe.
Suggested-by: Tomasz Figa <tfiga@chromium.org>
Signed-off-by: Bingbu Cao <bingbu.cao@intel.com>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
The mt9v111_def_fmt structure is only copied into another structure,
so make it const.
The opportunity for this change was found using Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Acked-by: Jacopo Mondi <jacopo+renesas@jmondi.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In the current codes, the following 3 lines would be output to
the console for each irq line.
gpio gpiochip0: (gpio_thunderx): allocate IRQ 10, hwirq 0
gpio gpiochip0: (gpio_thunderx): found parent hwirq 245784
gpio gpiochip0: (gpio_thunderx): alloc_irqs_parent for 10 parent hwirq 245784
In general, there are about tens of irq lines for each gpio chip,
and then it would emit so many insignificant log in the boot process.
These infos are more suitable for the dbg purpose. So change these
to the dbg level. With this change, about 200 lines are suppressed
on my Marvell cn96xx board.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Link: https://lore.kernel.org/r/20200120095625.25164-1-haokexin@gmail.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
* Tiger Lake appears to have _HID enumeration, thus driver has been updated
* Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
* Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
* Lynxpoint GPIO has been converted to true pin control driver
* The common driver now uses IRQ chip enumeration via GPIO chip
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace WARN with dev_info_once when setting direct-irq pin to output
- Do not clear IRQ flags on direct-irq enabled pins
- Reuse struct intel_pinctrl in the driver
- Use local variable to keep device pointer
- Keep pointer to struct device instead of its container
- Use GPIO direction definitions
- Move IRQ valid mask initialization to a dedicated callback
- Group GPIO IRQ chip initialization
- Allocate IRQ chip dynamic
cherryview:
- Use GPIO direction definitions
intel:
- Pass irqchip when adding gpiochip
- Add GPIO <-> pin mapping ranges via callback
- Share struct intel_pinctrl for wider use
- Use GPIO direction definitions
lynxpoint:
- Update summary in the driver
- Switch to pin control API
- Add GPIO <-> pin mapping ranges via callback
- Implement ->pin_dbg_show()
- Add pin control operations
- Reuse struct intel_pinctrl in the driver
- Add pin control data structures
- Implement intel_gpio_get_direction callback
- Implement ->irq_ack() callback
- Move ownership check to IRQ chip
- Move lp_irq_type() closer to IRQ related routines
- Move ->remove closer to ->probe()
- Extract lp_gpio_acpi_use() for future use
- Convert unsigned to unsigned int
- Switch to memory mapped IO accessors
- Keep pointer to struct device instead of its container
- Relax GPIO request rules
- Assume 2 bits for mode selector
- Use standard pattern for memory allocation
- Use %pR to print IO resource
- Drop useless assignment
- Correct amount of pins
- Use raw_spinlock for locking
- Move GPIO driver to pin controller folder
sunrisepoint:
- Add Coffee Lake-S ACPI ID
- Add missing Interrupt Status register offset
tigerlake:
- Tiger Lake uses _HID enumeration
-----BEGIN PGP SIGNATURE-----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=+ZAJ
-----END PGP SIGNATURE-----
Merge tag 'intel-pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pinctrl/intel into devel
intel-pinctrl for v5.6-1
* Tiger Lake appears to have _HID enumeration, thus driver has been updated
* Coffee Lake-S has the same IP as Sunrisepoint, thus ID has been added
* Baytrail has got more clean ups and bug fixes, such as direct IRQ handling
* Lynxpoint GPIO has been converted to true pin control driver
* The common driver now uses IRQ chip enumeration via GPIO chip
The following is an automated git shortlog grouped by driver:
baytrail:
- Replace WARN with dev_info_once when setting direct-irq pin to output
- Do not clear IRQ flags on direct-irq enabled pins
- Reuse struct intel_pinctrl in the driver
- Use local variable to keep device pointer
- Keep pointer to struct device instead of its container
- Use GPIO direction definitions
- Move IRQ valid mask initialization to a dedicated callback
- Group GPIO IRQ chip initialization
- Allocate IRQ chip dynamic
cherryview:
- Use GPIO direction definitions
intel:
- Pass irqchip when adding gpiochip
- Add GPIO <-> pin mapping ranges via callback
- Share struct intel_pinctrl for wider use
- Use GPIO direction definitions
lynxpoint:
- Update summary in the driver
- Switch to pin control API
- Add GPIO <-> pin mapping ranges via callback
- Implement ->pin_dbg_show()
- Add pin control operations
- Reuse struct intel_pinctrl in the driver
- Add pin control data structures
- Implement intel_gpio_get_direction callback
- Implement ->irq_ack() callback
- Move ownership check to IRQ chip
- Move lp_irq_type() closer to IRQ related routines
- Move ->remove closer to ->probe()
- Extract lp_gpio_acpi_use() for future use
- Convert unsigned to unsigned int
- Switch to memory mapped IO accessors
- Keep pointer to struct device instead of its container
- Relax GPIO request rules
- Assume 2 bits for mode selector
- Use standard pattern for memory allocation
- Use %pR to print IO resource
- Drop useless assignment
- Correct amount of pins
- Use raw_spinlock for locking
- Move GPIO driver to pin controller folder
sunrisepoint:
- Add Coffee Lake-S ACPI ID
- Add missing Interrupt Status register offset
tigerlake:
- Tiger Lake uses _HID enumeration
When submitting v2 of "fou: Support binding FoU socket" (1713cb37bf),
I accidentally sent the wrong version of the patch and one fix was
missing. In the initial version of the patch, as well as the version 2
that I submitted, I incorrectly used ".type" for the two V6-attributes.
The correct is to use ".len".
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Fixes: 1713cb37bf ("fou: Support binding FoU socket")
Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.
iwlwifi
* don't send the PPAG command when PPAG is disabled, since it can cause problems
* a few fixes for a HW bug
* a fix for RS offload;
* a fix for 3168 devices where the NVM tables where the wrong tables were being read
* fix a couple of potential memory leaks in TXQ code
* disable L0S states in all hardware since our hardware doesn't
officially support them anymore (and older versions of the hardware
had instability in these states)
* remove lar_disable parameter since it has been causing issues for
some people who erroneously disable it
* force the debug monitor HW to stop also when debug is disabled,
since it sometimes stays on and prevents low system power states
* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems
libertas
* fix two buffer overflows
mt76
* build fix related to CONFIG_MT76_LEDS
* fix off by one in bitrates handling
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJeKX2wAAoJEG4XJFUm622bG8QH/3+QXaSJAVqzbQh2boy7aS88
xhrrnh+bSqWY0ChMk0Z73RF8Ek0WlO+os4uN1cbWIWujrdQUPbTBtOwX4d0TzTue
E3tBFPiHTlVtU43z1bsprA+6EE7fqt/H2lWtlxk0IHzeiQY9NcB6BlDKKCzk5Hib
aMb5HCQy4JmSK83E60HLM9L4nEmEP+yveaKL7uaAZw+qkmyk2mT6um0TlmOYVoNG
9V6k3OZto8LvyV6jKPZgVI6QBATnwHDxlWgooYRj54PuCj9hTbR2mcuUL2QyQeze
AX2QNI+1kWIrAiDaU/lOj8579SiUl36iqtuKmtLhDnSe1GxDkrzmawtz3aGDm4k=
=VZox
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-2020-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for v5.5
Second set of fixes for v5.5. There are quite a few patches,
especially on iwlwifi, due to me being on a long break. Libertas also
has a security fix and mt76 a build fix.
iwlwifi
* don't send the PPAG command when PPAG is disabled, since it can cause problems
* a few fixes for a HW bug
* a fix for RS offload;
* a fix for 3168 devices where the NVM tables where the wrong tables were being read
* fix a couple of potential memory leaks in TXQ code
* disable L0S states in all hardware since our hardware doesn't
officially support them anymore (and older versions of the hardware
had instability in these states)
* remove lar_disable parameter since it has been causing issues for
some people who erroneously disable it
* force the debug monitor HW to stop also when debug is disabled,
since it sometimes stays on and prevents low system power states
* don't send IWL_MVM_RXQ_NSSN_SYNC notification due to DMA problems
libertas
* fix two buffer overflows
mt76
* build fix related to CONFIG_MT76_LEDS
* fix off by one in bitrates handling
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Keys queued for measurement should be freed if a custom IMA policy
was not loaded. Otherwise, the keys will remain queued forever
consuming kernel memory.
This patch defines a delayed workqueue to handle the above scenario.
The workqueue handler is setup to execute 5 minutes after IMA
initialization is completed.
If a custom IMA policy is loaded before the workqueue handler is
scheduled to execute, the workqueue task is cancelled and any queued keys
are processed for measurement. But if a custom policy was not loaded then
the queued keys are just freed when the delayed workqueue handler is run.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Reported-by: kernel test robot <rong.a.chen@intel.com> # sleeping
function called from invalid context
Reported-by: kbuild test robot <lkp@intel.com> # redefinition of
ima_init_key_queue() function.
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measuring keys requires a custom IMA policy to be loaded. Keys should
be queued for measurement if a custom IMA policy is not yet loaded.
Keys queued for measurement, if any, should be processed when a custom
policy is loaded.
This patch updates the IMA hook function ima_post_key_create_or_update()
to queue the key if a custom IMA policy has not yet been loaded. And,
ima_update_policy() function, which is called when a custom IMA policy
is loaded, is updated to process queued keys.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Measuring keys requires a custom IMA policy to be loaded. Keys created
or updated before a custom IMA policy is loaded should be queued and
will be processed after a custom policy is loaded.
This patch defines a workqueue for queuing keys when a custom IMA policy
has not yet been loaded. An intermediate Kconfig boolean option namely
IMA_QUEUE_EARLY_BOOT_KEYS is used to declare the workqueue functions.
A flag namely ima_process_keys is used to check if the key should be
queued or should be processed immediately.
Signed-off-by: Lakshmi Ramasubramanian <nramas@linux.microsoft.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
All rtd->dai_link callback functions are controlled by soc_rtd_xxxx(),
and checking rtd->dai_link->ops.
We don't need to have null_snd_soc_ops anymore.
This patch removes it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87zhegl3oz.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soc_rtd_trigger() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/871rrsmi9j.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soc_rtd_hw_free() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/8736c8mi9n.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soc_rtd_hw_params() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/874kwomi9r.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soc_rtd_prepare() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/875zh4mi9v.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Add soc_rtd_shutdown() to make the code easier to read
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/877e1kmi9z.wl-kuninori.morimoto.gx@renesas.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
