MIC BIAS External1 sets pm8916_wcd_analog_enable_micbias_ext1()
as event handler, which ends up in pm8916_wcd_analog_enable_micbias_ext().
But pm8916_wcd_analog_enable_micbias_ext() only handles the POST_PMU
event, which is not specified in the event flags for MIC BIAS External1.
This means that the code in the event handler is never actually run.
Set SND_SOC_DAPM_POST_PMU as the only event for the handler to fix this.
Fixes: 585e881e5b ("ASoC: codecs: Add msm8916-wcd analog codec")
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20200111164006.43074-2-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
In case system has multiple HDA codecs, and codec probe fails for
at least one but not all codecs, driver will end up cancelling
a non-initialized timer context upon driver removal.
Call trace of typical case:
[ 60.593646] WARNING: CPU: 1 PID: 1147 at kernel/workqueue.c:3032
__flush_work+0x18b/0x1a0
[...]
[ 60.593670] __cancel_work_timer+0x11f/0x1a0
[ 60.593673] hdac_hda_dev_remove+0x25/0x30 [snd_soc_hdac_hda]
[ 60.593674] device_release_driver_internal+0xe0/0x1c0
[ 60.593675] bus_remove_device+0xd6/0x140
[ 60.593677] device_del+0x175/0x3e0
[ 60.593679] ? widget_tree_free.isra.7+0x90/0xb0 [snd_hda_core]
[ 60.593680] snd_hdac_device_unregister+0x34/0x50 [snd_hda_core]
[ 60.593682] snd_hdac_ext_bus_device_remove+0x2a/0x60 [snd_hda_ext_core]
[ 60.593684] hda_dsp_remove+0x26/0x100 [snd_sof_intel_hda_common]
[ 60.593686] snd_sof_device_remove+0x84/0xa0 [snd_sof]
[ 60.593687] sof_pci_remove+0x10/0x30 [snd_sof_pci]
[ 60.593689] pci_device_remove+0x36/0xb0
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
In case system has multiple HDA controllers, it can happen that
same HDA codec driver is used for codecs of multiple controllers.
In this case, SOF may fail to probe the HDA driver and SOF
initialization fails.
SOF HDA code currently relies that a call to request_module() will
also run device matching logic to attach driver to the codec instance.
However if driver for another HDA controller was already loaded and it
already loaded the HDA codec driver, this breaks current logic in SOF.
In this case the request_module() SOF does becomes a no-op and HDA
Codec driver is not attached to the codec instance sitting on the HDA
bus SOF is controlling. Typical scenario would be a system with both
external and internal GPUs, with driver of the external GPU loaded
first.
Fix this by adding similar logic as is used in legacy HDA driver
where an explicit device_attach() call is done after request_module().
Also add logic to propagate errors reported by device_attach() back
to caller. This also works in the case where drivers are not built
as modules.
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-8-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We will reinit DSP in a loop when it fails to initialize the first
time, as recommended. So, it is not an error before we finally give
up. And reorder the trace to make it more readable.
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Currrently the memory for the clk_bulk_data of the QSPI controller
is allocated with spi_alloc_master(). The bulk data pointer is passed
to devm_clk_bulk_get() which saves it in clk_bulk_devres->clks. When
the device is removed later devm_clk_bulk_release() is called and
uses the bulk data referenced by the pointer to release the clocks.
For this driver this results in accessing memory that has already
been freed, since the memory allocated with spi_alloc_master() is
released by spi_controller_release(), which is called before the
managed resources are released.
Use device managed memory for the clock bulk data to fix the issue
described above.
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20200108133948.1.I35ceb4db3ad8cfab78f7cd51494aeff4891339f5@changeid
Signed-off-by: Mark Brown <broonie@kernel.org>
Nowdays ROHM_CHIP_TYPE_AMOUNT includes not only BD71837/BD71847 but also
BD70528/BD71828 which are not supported by this driver. So it seems not
necessay to have pmic_regulators[ROHM_CHIP_TYPE_AMOUNT] as mapping table.
Simplify the code by removing struct bd718xx_pmic_inits and
pmic_regulators[ROHM_CHIP_TYPE_AMOUNT].
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200108014256.11282-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This introduces the IPQ4019 VQMMC LDO driver needed for
the SD/EMMC driver I/O level operation.
This will enable introducing SD/EMMC support for the built-in controller.
Signed-off-by: Mantas Pucka <mantas@8devices.com>
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Link: https://lore.kernel.org/r/20200112113003.11110-1-robert.marko@sartura.hr
Signed-off-by: Mark Brown <broonie@kernel.org>
Use the new .probe_new for i2c drivers.
These drivers do not use const struct i2c_device_id * argument, so convert
them to utilise the simplified i2c driver registration.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Link: https://lore.kernel.org/r/20200109155808.22003-1-axel.lin@ingics.com
Signed-off-by: Mark Brown <broonie@kernel.org>
There is a typo in the error checking. We should be checking
"->rdev[i]" instead of just "->rdev".
Fixes: 6501c1f54a ("regulator: mpq7920: add mpq7920 regulator driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/20200113125805.xri6jqoxy2ldzqyg@kili.mountain
Signed-off-by: Mark Brown <broonie@kernel.org>
RT711 is in SoundWire mode on link0.
RT1308 is either on SSP2 or on SoundWire link1 (depending on hardware
reworks).
Signed-off-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-6-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board
RT700 using link1.
For now we only have definitions for CML. CNL and CFL are just
placeholders.
Signed-off-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-5-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The two configurations are with the Realtek 3-in-1 board requiring all
4 links to be enabled, or basic configuration with the on-board RT700
using link0.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We cannot really lump SoundWire-based configurations into the same
tables since the mechanisms to identify boards is based on link
configurations and _ADR instead of _HID for I2S, so define new tables
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
For SoundWire support, we added a 'link_mask' to describe the PCB hardware
layout. This helped form a signature that can be used as a first-order way
of detecting the hardware and selecting the machine driver.
The concept of link_mask is however not enough. Some BIOS enable all links,
even when there are no devices physically connected. We can also see
variations with multiple devices attached on one link, or different types
of devices connected on the same link. To accurately represent the
hardware, we need to build static tables where each link exposes a list of
expected devices represented by the 64-bit _ADR field (which uniquely
identifies each device).
The new 'links' field is optional when the link_mask is sufficient to
represent a platform in a unique way.
The existing mechanism to support I2C devices is left as is, it'd be too
invasive to change the existing support for _HID and the notion of link is
not relevant either.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Bard liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20200110222530.30303-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Any app using ALSA OSS emulation on top of SOF will fail
to error from OSS SNDCTL_DSP_SETFMT ioctl. Reported initially
as an issue with xournalpp (application using PortAudio with
an OSS backend), but applies more generally to other apps
using OSS as well.
Problem is caused by SOF PCM not supporting repeated calls
to hw_params(), without matching calls to pcm_free(). This
is however exactly what the ALSA OSS PCM code is doing when
it is handling the OSS ioctls.
The problem will lead to leaking of DSP resources and eventual
failure of DSP PCM_PARAMS IPC.
BugLink: https://github.com/thesofproject/linux/issues/1510
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-7-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The legacy driver uses dummy cpu_dai and platform, SOF requires actual
values to bind.
Signed-off-by: Pan Xiuli <xiuli.pan@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The existing machine driver depends on SPI Master capabilities, but
the Kconfig does not model this dependency and the SPI controller
needs to be selected as well.
Without this patch the machine driver probe would fail with the
spi-RT5677AA:00 component never registered by the ACPI/LPSS subsystem.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20200110235751.3404-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Commit a857e073ff ("ASoC: txx9: txx9aclc: remove snd_pcm_ops") removed
the last use of the rtd variable but didn't remove its definition,
leading to the following warning/error for MIPS rbtx49xx_defconfig
builds:
sound/soc/txx9/txx9aclc.c: In function 'txx9aclc_pcm_hw_params':
sound/soc/txx9/txx9aclc.c:54:30: error: unused variable 'rtd'
[-Werror=unused-variable]
struct snd_soc_pcm_runtime *rtd = snd_pcm_substream_chip(substream);
^~~
Resolve this by removing the unused variable.
Signed-off-by: Paul Burton <paulburton@kernel.org>
Fixes: a857e073ff ("ASoC: txx9: txx9aclc: remove snd_pcm_ops")
Cc: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20200109191422.334516-1-paulburton@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix sparse warning:
drivers/net/ethernet/sfc/ethtool_common.c
warning: symbol 'efx_fill_test' was not declared. Should it be static?
warning: symbol 'efx_fill_loopback_test' was not declared.
Should it be static?
warning: symbol 'efx_describe_per_queue_stats' was not declared.
Should it be static?
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix up inconsistent usage of upper and lowercase letters in "Exynos"
name.
"EXYNOS" is not an abbreviation but a regular trademarked name.
Therefore it should be written with lowercase letters starting with
capital letter.
The lowercase "Exynos" name is promoted by its manufacturer Samsung
Electronics Co., Ltd., in advertisement materials and on website.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
commit 2589c4025f ("drm/rockchip: Avoid drm_dp_link helpers") changes
the type of variables used to store the display port data rate and
number of lanes to u8. However u8 is not sufficient to store the link
data rate of the display port.
This commit reverts the type of data rate to unsigned int.
Fixes: 2589c4025f ("drm/rockchip: Avoid drm_dp_link helpers")
Signed-off-by: Tobias Schramm <t.schramm@manjaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109073129.378507-2-t.schramm@manjaro.org
When writing a pid to file "tasks", a callback function move_myself() is
queued to this task to be called when the task returns from kernel mode
or exits. The purpose of move_myself() is to activate the newly assigned
closid and/or rmid associated with this task. This activation is done by
calling resctrl_sched_in() from move_myself(), the same function that is
called when switching to this task.
If this work is successfully queued but then the task enters PF_EXITING
status (e.g., receiving signal SIGKILL, SIGTERM) prior to the
execution of the callback move_myself(), move_myself() still calls
resctrl_sched_in() since the task status is not currently considered.
When a task is exiting, the data structure of the task itself will
be freed soon. Calling resctrl_sched_in() to write the register that
controls the task's resources is unnecessary and it implies extra
performance overhead.
Add check on task status in move_myself() and return immediately if the
task is PF_EXITING.
[ bp: Massage. ]
Signed-off-by: Xiaochen Shen <xiaochen.shen@intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Link: https://lkml.kernel.org/r/1578500026-21152-1-git-send-email-xiaochen.shen@intel.com
In the commit 8e85def572 ("ALSA: hda: enable regmap internal
locking"), we re-enabled the regmap lock due to the reported
regression that showed the possible concurrent accesses. It was a
temporary workaround, and there are still a few opened races even
after the revert. In this patch, we cover those still opened windows
with a proper mutex lock and disable the regmap internal lock again.
First off, the patch introduces a new snd_hdac_device.regmap_lock
mutex that is applied for each snd_hdac_regmap_*() call, including
read, write and update helpers. The mutex is applied carefully so
that it won't block the self-power-up procedure in the helper
function. Also, this assures the protection for the accesses without
regmap, too.
The snd_hdac_regmap_update_raw() is refactored to use the standard
regmap_update_bits_check() function instead of the open-code. The
non-regmap case is still open-coded but it's an easy part. The all
read and write operations are in the single mutex protection, so it's
now race-free.
In addition, a couple of new helper functions are added:
snd_hdac_regmap_update_raw_once() and snd_hdac_regmap_sync(). Both
are called from HD-audio legacy driver. The former is to initialize
the given verb bits but only once when it's not initialized yet. Due
to this condition, the function invokes regcache_cache_only(), and
it's now performed inside the regmap_lock (formerly it was racy) too.
The latter function is for simply invoking regcache_sync() inside the
regmap_lock, which is called from the codec resume call path.
Along with that, the HD-audio codec driver code is slightly modified /
simplified to adapt those new functions.
And finally, snd_hdac_regmap_read_raw(), *_write_raw(), etc are
rewritten with the helper macro. It's just for simplification because
the code logic is identical among all those functions.
Tested-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20200109090104.26073-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
'hid_hw_stop()' is already in the error handling path when branching to
the 'hid_hw_open_fail' label.
There is no point in calling it twice, so remove one.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
As we use the active state to keep the vma alive while we are reading
its contents during GPU error capture, we need to mark the
ring->vma as active during execution if we want to include the rinbuffer
in the error state.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b1e3177bd1 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-3-chris@chris-wilson.co.uk
(cherry picked from commit 8ccfc20a7d)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
As we use the active state to keep the vma alive while we are reading
its contents during GPU error capture, we need to mark the
context->state vma as active during execution if we want to include it
in the error state.
Reported-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: b1e3177bd1 ("drm/i915: Coordinate i915_active with its own mutex")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-2-chris@chris-wilson.co.uk
(cherry picked from commit 1b8bfc5726)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we first to try to unbind the VMA (and lazily rebind on next
use) as an optimisation during restore_ggtt_mappings. Ideally, the only
objects in the GGTT upon resume are the pinned kernel objects which
can't be unbound and need to be restored. As the unbind interferes with
the plan to mark those objects as active for error capture, forgo the
optimisation.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200110110402.1231745-1-chris@chris-wilson.co.uk
(cherry picked from commit 80e5351df1)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The codec driver needs correct regulators in order to probe.
Both VCC_3.3V and VCC_1.8V is always on fixed regulators on the board.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
The codec driver needs correct regulators in order to probe.
Both VCC_3V3 and VCC_1V8 is always on fixed regulators on the board.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
There seems to be some undocumented bandwidth
bottleneck/dependency which scales with CDCLK,
causing FIFO underruns when CDCLK is too low,
even when it's correct from BSpec point of view.
Currently for TGL platforms we calculate
min_cdclk initially based on pixel_rate divided
by 2, accounting for also plane requirements,
however in some cases the lowest possible CDCLK
doesn't work and causing the underruns.
We've found experimentally that raising cdclk to
at least pixel_rate (rather than pixel_rate/2)
eliminates these underruns, so let's use this as a
temporary workaround until the hardware team
can suggest a more precise remedy.
Explicitly stating here that this seems to be currently
rather a Hack, than final solution.
v2: Use clamp operation instead of min(Matt Roper)
v3: - Fixed commit message(Matt Roper)
- Now using pixel_rate instead of max_cdclk(Jani Nikula)
- Switched to max from clamp(Ville Syrjälä)
Hopefully this hybrid satisfies everyone :)
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Signed-off-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Closes: https://gitlab.freedesktop.org/drm/intel/issues/402
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200109220547.23817-1-stanislav.lisovskiy@intel.com
Fix build error:
./drivers/gpu/drm/i915/selftests/i915_random.h: In function i915_prandom_u32_max_state:
./drivers/gpu/drm/i915/selftests/i915_random.h:48:23: error:
implicit declaration of function mul_u32_u32; did you mean mul_u64_u32_div? [-Werror=implicit-function-declaration]
return upper_32_bits(mul_u32_u32(prandom_u32_state(state), ep_ro));
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 7ce5b6850b ("drm/i915/selftests: Use mul_u32_u32() for 32b x 32b -> 64b result")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20200107135014.36472-1-yuehaibing@huawei.com
(cherry picked from commit 62bf5465b2)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Currently we do not support writing to UDF disks with Metadata partition.
There is already check that disks with declared minimal write revision to
UDF 2.50 or higher are mounted only in R/O mode but this does not cover
situation when minimal write revision is set incorrectly (e.g. to 2.01).
Link: https://lore.kernel.org/r/20200112144959.28104-1-pali.rohar@gmail.com
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Currently ENTITYID_FLAGS_* macros definitions are written as hex numbers
but their meaning is not bitwise-or flags. But rather bit position. This is
unusual and could be misleading. So change meaning of ENTITYID_FLAGS_*
macros definitions to be really bitwise-or flags.
Link: https://lore.kernel.org/r/20200112221353.29711-1-pali.rohar@gmail.com
Signed-off-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Commit 582f95835a ("arm64: entry: convert el0_sync to C") caused
the ENDPROC() annotating the end of el0_sync to be placed after the code
for el0_sync_compat. This replaced the previous annotation where it was
located after all the cases that are now converted to C, including after
the currently unannotated el0_irq_compat and el0_error_compat. Move the
annotation to the end of the function and add separate annotations for
the _compat ones.
Fixes: 582f95835a (arm64: entry: convert el0_sync to C)
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Will Deacon <will@kernel.org>
Add tracepoints to remaining places where device's power.usage_count
is changed.
This helps debugging where and why autosuspend is prevented.
Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to the data sheet the ambient sensor's scale is 0.12 lux/step
(not 0.024 lux/step as used by vcnl4200) when the integration time is
80ms. The integration time is currently hardcoded in the driver to that
value.
See p. 8 in https://www.vishay.com/docs/84307/designingvcnl4040.pdf
Fixes: 5a441aade5 ("iio: light: vcnl4000 add support for the VCNL4040 proximity and light sensor")
Signed-off-by: Guido Günther <agx@sigxcpu.org>
Reviewed-by: Marco Felsch <m.felsch@pengutronix.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Previous versions of `iio_compute_scan_bytes` only aligned each element
to its own length (i.e. its own natural alignment). Because multiple
consecutive sets of scan elements are buffered this does not work in
case the computed scan bytes do not align with the natural alignment of
the first scan element in the set.
This commit fixes this by aligning the scan bytes to the natural
alignment of the largest scan element in the set.
Fixes: 959d2952d1 ("staging:iio: make iio_sw_buffer_preenable much more general.")
Signed-off-by: Lars Möllendorf <lars.moellendorf@plating.de>
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
IIO triggered buffer depends on IIO buffer which is missing from Kconfig
file. This should go unnoticed most of the time because there's a
chance something else has already enabled buffers. In some rare cases
though one might experience kbuild warnings about unmet direct
dependencies and build failures due to missing symbols.
Fix this by selecting IIO_BUFFER explicitly.
Signed-off-by: Tomasz Duszynski <tduszyns@gmail.com>
Fixes: a1d642266c ("iio: chemical: add support for Plantower PMS7003 sensor")
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
At the moment, attempting to probe a device with ST_LSM6DS3_ID
(e.g. using the st,lsm6ds3 compatible) fails with:
st_lsm6dsx_i2c 1-006b: unsupported whoami [69]
... even though 0x69 is the whoami listed for ST_LSM6DS3_ID.
This happens because st_lsm6dsx_check_whoami() also attempts
to match unspecified (zero-initialized) entries in the "id" array.
ST_LSM6DS3_ID = 0 will therefore match any entry in
st_lsm6dsx_sensor_settings (here: the first), because none of them
actually have all 12 entries listed in the "id" array.
Avoid this by additionally checking if "name" is set,
which is only set for valid entries in the "id" array.
Note: Although the problem was introduced earlier it did not surface until
commit 52f4b1f196 ("iio: imu: st_lsm6dsx: add support for accel/gyro unit of lsm9ds1")
because ST_LSM6DS3_ID was the first entry in st_lsm6dsx_sensor_settings.
Fixes: d068e4a0f9 ("iio: imu: st_lsm6dsx: add support to multiple devices with the same settings")
Cc: <stable@vger.kernel.org> # 5.4
Acked-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch fixes device tree channel configuration.
ad7124 driver reads channels configuration from the device tree.
It expects to find channel specifications as child nodes.
Before this patch ad7124 driver assumed that the child nodes are parsed
by for_each_available_child_of_node in the order 0,1,2,3...
This is wrong and the real order of the children can be seen by running:
dtc -I fs /sys/firmware/devicetree/base on the machine.
For example, running this on an rpi 3B+ yields the real
children order: 4,2,0,7,5,3,1,6
Before this patch the driver assigned the channel configuration
like this:
- 0 <- 4
- 1 <- 2
- 2 <- 0
........
For example, the symptoms can be observed by connecting the 4th channel
to a 1V tension and then reading the in_voltage0-voltage19_raw sysfs
(multiplied of course by the scale) one would see that channel 0
measures 1V and channel 4 measures only noise.
Now the driver uses the reg property of each child in order to
correctly identify to which channel the parsed configuration
belongs to.
Fixes b3af341bbd: ("iio: adc: Add ad7124 support")
Signed-off-by: Alexandru Tachici <alexandru.tachici@analog.com>
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ACPICA commit f78d50aacc2a1c6dfa59052a696a54cec16e6aab
Version 20200110.
Link: f78d50aa
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA commit 8b9c69d0984067051ffbe8526f871448ead6a26b
Link: 8b9c69d0
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
