As pointed out by Mathy Vanhoef, we implement the RX PN check
on fragmented frames incorrectly - we check against the last
received PN prior to the new frame, rather than to the one in
this frame itself.
Prior patches addressed the security issue here, but in order
to be able to reason better about the code, fix it to really
compare against the current frame's PN, not the last stored
one.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.bfbc340ff071.Id0b690e581da7d03d76df90bb0e3fd55930bc8a0@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Prior patches protected against fragmentation cache attacks
by coloring keys, but this shows that it can lead to issues
when multiple stations use the same sequence number. Add a
fragment cache to struct sta_info (in addition to the one in
the interface) to separate fragments for different stations
properly.
This then automatically clear most of the fragment cache when a
station disconnects (or reassociates) from an AP, or when client
interfaces disconnect from the network, etc.
On the way, also fix the comment there since this brings us in line
with the recommendation in 802.11-2016 ("An AP should support ...").
Additionally, remove a useless condition (since there's no problem
purging an already empty list).
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.fc35046b0d52.I1ef101e3784d13e8f6600d83de7ec9a3a45bcd52@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
With old ciphers (WEP and TKIP) we shouldn't be using A-MSDUs
since A-MSDUs are only supported if we know that they are, and
the only practical way for that is HT support which doesn't
support old ciphers.
However, we would normally accept them anyway. Since we check
the MMIC before deaggregating A-MSDUs, and the A-MSDU bit in
the QoS header is not protected in TKIP (or WEP), this enables
attacks similar to CVE-2020-24588. To prevent that, drop A-MSDUs
completely with old ciphers.
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20210511200110.076543300172.I548e6e71f1ee9cad4b9a37bf212ae7db723587aa@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Mitigate A-MSDU injection attacks (CVE-2020-24588) by detecting if the
destination address of a subframe equals an RFC1042 (i.e., LLC/SNAP)
header, and if so dropping the complete A-MSDU frame. This mitigates
known attacks, although new (unknown) aggregation-based attacks may
remain possible.
This defense works because in A-MSDU aggregation injection attacks, a
normal encrypted Wi-Fi frame is turned into an A-MSDU frame. This means
the first 6 bytes of the first A-MSDU subframe correspond to an RFC1042
header. In other words, the destination MAC address of the first A-MSDU
subframe contains the start of an RFC1042 header during an aggregation
attack. We can detect this and thereby prevent this specific attack.
For details, see Section 7.2 of "Fragment and Forge: Breaking Wi-Fi
Through Frame Aggregation and Fragmentation".
Note that for kernel 4.9 and above this patch depends on "mac80211:
properly handle A-MSDUs that start with a rfc1042 header". Otherwise
this patch has no impact and attacks will remain possible.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.25d93176ddaf.I9e265b597f2cd23eb44573f35b625947b386a9de@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Simultaneously prevent mixed key attacks (CVE-2020-24587) and fragment
cache attacks (CVE-2020-24586). This is accomplished by assigning a
unique color to every key (per interface) and using this to track which
key was used to decrypt a fragment. When reassembling frames, it is
now checked whether all fragments were decrypted using the same key.
To assure that fragment cache attacks are also prevented, the ID that is
assigned to keys is unique even over (re)associations and (re)connects.
This means fragments separated by a (re)association or (re)connect will
not be reassembled. Because mac80211 now also prevents the reassembly of
mixed encrypted and plaintext fragments, all cache attacks are prevented.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.3f8290e59823.I622a67769ed39257327a362cfc09c812320eb979@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Do not mix plaintext and encrypted fragments in protected Wi-Fi
networks. This fixes CVE-2020-26147.
Previously, an attacker was able to first forward a legitimate encrypted
fragment towards a victim, followed by a plaintext fragment. The
encrypted and plaintext fragment would then be reassembled. For further
details see Section 6.3 and Appendix D in the paper "Fragment and Forge:
Breaking Wi-Fi Through Frame Aggregation and Fragmentation".
Because of this change there are now two equivalent conditions in the
code to determine if a received fragment requires sequential PNs, so we
also move this test to a separate function to make the code easier to
maintain.
Cc: stable@vger.kernel.org
Signed-off-by: Mathy Vanhoef <Mathy.Vanhoef@kuleuven.be>
Link: https://lore.kernel.org/r/20210511200110.30c4394bb835.I5acfdb552cc1d20c339c262315950b3eac491397@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The rocket driver and documentation were removed in this commit, but
the corresponding entry in index.rst was not removed.
Signed-off-by: Desmond Cheong Zhi Xi <desmondcheongzx@gmail.com>
Fixes: 3b00b6af7a ("tty: rocket, remove the driver")
Link: https://lore.kernel.org/r/20210511134937.2442291-1-desmondcheongzx@gmail.com
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Probably because the original file was pre-processed by some
tool, both i40e.rst and iavf.rst files are using this character:
- U+2013 ('–'): EN DASH
meaning an hyphen when calling a command line application, which
is obviously wrong. So, replace them by an hyphen, ensuring
that it will be properly displayed as literals when building
the documentation.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/95eb2a48d0ca3528780ce0dfce64359977fa8cb3.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
While UTF-8 characters can be used at the Linux documentation,
the best is to use them only when ASCII doesn't offer a good replacement.
So, replace the occurences of the following UTF-8 characters:
- U+2013 ('–'): EN DASH
In this specific case, EN DASH was used instead of a minus
sign. So, replace it by a single hyphen.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/73b3c7c1eef5c12ddc941624d23689313bd56529.1620744606.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
-----BEGIN PGP SIGNATURE-----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=Phtq
-----END PGP SIGNATURE-----
Merge tag 'for-5.13-rc1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fix from David Sterba:
"Handle transaction start error in btrfs_fileattr_set()
This is fix for code introduced by the new fileattr merge"
* tag 'for-5.13-rc1-part2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: handle transaction start error in btrfs_fileattr_set
Host can send invalid commands and flood the target with error messages.
Demote the error message from pr_err() to pr_debug() in
nvmet_parse_fabrics_cmd() and nvmet_parse_connect_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Use the helper nvmet_report_invalid_opcode() to report invalid opcode
so we can remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Host can send invalid commands and flood the target with error messages
for the discovery controller. Demote the error message from pr_err() to
pr_debug( in nvmet_parse_discovery_cmd().
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When handling passthru commands, for inline bio allocation we only
consider the transfer size. This works well when req->sg_cnt fits into
the req->inline_bvec, but it will result in the early return from
bio_add_hw_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O of size 32768 and first buffer is not aligned to the
page boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in early return in the following code path :-
nvmet_bdev_execute_rw()
bio_add_pc_page()
bio_add_hw_page()
if (bio_full(bio, len))
return 0;
Use previously introduced helper nvmet_use_inline_bvec() to consider
req->sg_cnt when using inline bio. This only affects nvme-loop
transport.
Fixes: dab3902b19 ("nvmet: use inline bio for passthru fast path")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
When handling rw commands, for inline bio case we only consider
transfer size. This works well when req->sg_cnt fits into the
req->inline_bvec, but it will result in the warning in
__bio_add_page() when req->sg_cnt > NVMET_MAX_INLINE_BVEC.
Consider an I/O size 32768 and first page is not aligned to the page
boundary, then I/O is split in following manner :-
[ 2206.256140] nvmet: sg->length 3440 sg->offset 656
[ 2206.256144] nvmet: sg->length 4096 sg->offset 0
[ 2206.256148] nvmet: sg->length 4096 sg->offset 0
[ 2206.256152] nvmet: sg->length 4096 sg->offset 0
[ 2206.256155] nvmet: sg->length 4096 sg->offset 0
[ 2206.256159] nvmet: sg->length 4096 sg->offset 0
[ 2206.256163] nvmet: sg->length 4096 sg->offset 0
[ 2206.256166] nvmet: sg->length 4096 sg->offset 0
[ 2206.256170] nvmet: sg->length 656 sg->offset 0
Now the req->transfer_size == NVMET_MAX_INLINE_DATA_LEN i.e. 32768, but
the req->sg_cnt is (9) > NVMET_MAX_INLINE_BIOVEC which is (8).
This will result in the following warning message :-
nvmet_bdev_execute_rw()
bio_add_page()
__bio_add_page()
WARN_ON_ONCE(bio_full(bio, len));
This scenario is very hard to reproduce on the nvme-loop transport only
with rw commands issued with the passthru IOCTL interface from the host
application and the data buffer is allocated with the malloc() and not
the posix_memalign().
Fixes: 73383adfad ("nvmet: don't split large I/Os unconditionally")
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
nvme_init_identify and thus nvme_mpath_init can be called multiple
times and thus must not overwrite potentially initialized or in-use
fields. Split out a helper for the basic initialization when the
controller is initialized and make sure the init_identify path does
not blindly change in-use data structures.
Fixes: 0d0b660f21 ("nvme: add ANA support")
Reported-by: Martin Wilck <mwilck@suse.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Hannes Reinecke <hare@suse.de>
__blk_mq_sched_bio_merge() gets the ctx and hctx for the current CPU and
passes the hctx to ->bio_merge(). kyber_bio_merge() then gets the ctx
for the current CPU again and uses that to get the corresponding Kyber
context in the passed hctx. However, the thread may be preempted between
the two calls to blk_mq_get_ctx(), and the ctx returned the second time
may no longer correspond to the passed hctx. This "works" accidentally
most of the time, but it can cause us to read garbage if the second ctx
came from an hctx with more ctx's than the first one (i.e., if
ctx->index_hw[hctx->type] > hctx->nr_ctx).
This manifested as this UBSAN array index out of bounds error reported
by Jakub:
UBSAN: array-index-out-of-bounds in ../kernel/locking/qspinlock.c:130:9
index 13106 is out of range for type 'long unsigned int [128]'
Call Trace:
dump_stack+0xa4/0xe5
ubsan_epilogue+0x5/0x40
__ubsan_handle_out_of_bounds.cold.13+0x2a/0x34
queued_spin_lock_slowpath+0x476/0x480
do_raw_spin_lock+0x1c2/0x1d0
kyber_bio_merge+0x112/0x180
blk_mq_submit_bio+0x1f5/0x1100
submit_bio_noacct+0x7b0/0x870
submit_bio+0xc2/0x3a0
btrfs_map_bio+0x4f0/0x9d0
btrfs_submit_data_bio+0x24e/0x310
submit_one_bio+0x7f/0xb0
submit_extent_page+0xc4/0x440
__extent_writepage_io+0x2b8/0x5e0
__extent_writepage+0x28d/0x6e0
extent_write_cache_pages+0x4d7/0x7a0
extent_writepages+0xa2/0x110
do_writepages+0x8f/0x180
__writeback_single_inode+0x99/0x7f0
writeback_sb_inodes+0x34e/0x790
__writeback_inodes_wb+0x9e/0x120
wb_writeback+0x4d2/0x660
wb_workfn+0x64d/0xa10
process_one_work+0x53a/0xa80
worker_thread+0x69/0x5b0
kthread+0x20b/0x240
ret_from_fork+0x1f/0x30
Only Kyber uses the hctx, so fix it by passing the request_queue to
->bio_merge() instead. BFQ and mq-deadline just use that, and Kyber can
map the queues itself to avoid the mismatch.
Fixes: a6088845c2 ("block: kyber: make kyber more friendly with merging")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Omar Sandoval <osandov@fb.com>
Link: https://lore.kernel.org/r/c7598605401a48d5cfeadebb678abd10af22b83f.1620691329.git.osandov@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Add error handling in btrfs_fileattr_set in case of an error while
starting a transaction. This fixes btrfs/232 which otherwise used to
fail with below signature on Power.
btrfs/232 [ 1119.474650] run fstests btrfs/232 at 2021-04-21 02:21:22
<...>
[ 1366.638585] BUG: Unable to handle kernel data access on read at 0xffffffffffffff86
[ 1366.638768] Faulting instruction address: 0xc0000000009a5c88
cpu 0x0: Vector: 380 (Data SLB Access) at [c000000014f177b0]
pc: c0000000009a5c88: btrfs_update_root_times+0x58/0xc0
lr: c0000000009a5c84: btrfs_update_root_times+0x54/0xc0
<...>
pid = 24881, comm = fsstress
btrfs_update_inode+0xa0/0x140
btrfs_fileattr_set+0x5d0/0x6f0
vfs_fileattr_set+0x2a8/0x390
do_vfs_ioctl+0x1290/0x1ac0
sys_ioctl+0x6c/0x120
system_call_exception+0x3d4/0x410
system_call_common+0xec/0x278
Fixes: 97fc297754 ("btrfs: convert to fileattr")
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
A couple of high priority core fixes and the usual bits scattered
across individual drivers.
core:
* Fix ioctl handler double free.
* Fix an accidental ABI change wrt to error codes when an IOCTL is not
supported.
gp2ap002:
* Runtime pm imbalance on error.
hid-sensors:
* Fix a Kconfig dependency issue in a particularly crazy config.
mpu3050:
* Fix wrong temperature calculation due to a type needing to be signed.
pulsedlight:
* Runtime pm imbalance on error.
tsl2583
* Fix a potential division by zero.
-----BEGIN PGP SIGNATURE-----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=2wUO
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus
Jonathan writes:
First set of IIO fixes for the 5.13 cycle
A couple of high priority core fixes and the usual bits scattered
across individual drivers.
core:
* Fix ioctl handler double free.
* Fix an accidental ABI change wrt to error codes when an IOCTL is not
supported.
gp2ap002:
* Runtime pm imbalance on error.
hid-sensors:
* Fix a Kconfig dependency issue in a particularly crazy config.
mpu3050:
* Fix wrong temperature calculation due to a type needing to be signed.
pulsedlight:
* Runtime pm imbalance on error.
tsl2583
* Fix a potential division by zero.
* tag 'iio-fixes-5.13a' of https://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
iio: tsl2583: Fix division by a zero lux_val
iio: core: return ENODEV if ioctl is unknown
iio: core: fix ioctl handlers removal
iio: gyro: mpu3050: Fix reported temperature value
iio: hid-sensors: select IIO_TRIGGERED_BUFFER under HID_SENSOR_IIO_TRIGGER
iio: proximity: pulsedlight: Fix rumtime PM imbalance on error
iio: light: gp2ap002: Fix rumtime PM imbalance on error
Screen flickers on Innolux eDP 1.3 panel when clock rate 540000 is in use.
According to the panel vendor, though clock rate 540000 is advertised,
but the max clock rate it really supports is 270000.
Ville Syrjälä mentioned that fast and narrow also breaks some eDP 1.4
panel, so use slow and wide training for all panels to resolve the
issue.
User also confirmed that the new strategy doesn't introduce any
regression on XPS 9380.
v2:
- Use slow and wide for everything.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/3384
References: https://gitlab.freedesktop.org/drm/intel/-/issues/272
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210421052054.1434718-1-kai.heng.feng@canonical.com
(cherry picked from commit acca7762eb)
Fixes: 2bbd6dba84 ("drm/i915: Try to use fast+narrow link on eDP again and fall back to the old max strategy on failure")
Cc: <stable@vger.kernel.org> # v5.12+
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
hp_accel can take almost two seconds to resume on some HP laptops.
The bottleneck is on evaluating _INI, which is only needed to run once.
Resolve the issue by only invoking _INI when it's necessary. Namely, on
probe and on hibernation restore.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Acked-by: Éric Piel <eric.piel@trempplin-utc.net>
Link: https://lore.kernel.org/r/20210430060736.590321-1-kai.heng.feng@canonical.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
"smbc" should be "sbmc". `eval_smbc()` incorrectly called
the SMBC ACPI method instead of SBMC. This resulted in
partial loss of functionality. Rectify that by calling
the correct ACPI method (SBMC), and also rename
methods and constants.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=212985
Fixes: 0b765671cb ("platform/x86: ideapad-laptop: group and separate (un)related constants into enums")
Fixes: ff36b0d953 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Cc: stable@vger.kernel.org # 5.12
Signed-off-by: Barnabás Pőcze <pobrn@protonmail.com>
Link: https://lore.kernel.org/r/20210507235333.286505-1-pobrn@protonmail.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The third parameter of dytc_cql_command should not be NULL since it will
be dereferenced immediately.
Fixes: ff36b0d953 ("platform/x86: ideapad-laptop: rework and create new ACPI helpers")
Signed-off-by: Qiu Wenbo <qiuwenbo@kylinos.com.cn>
Acked-by: Ike Panhc <ike.pan@canonical.com>
Link: https://lore.kernel.org/r/20210428050636.8003-1-qiuwenbo@kylinos.com.cn
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Only the very first page of BPF ringbuf that contains consumer position
counter is supposed to be mapped as writeable by user-space. Producer
position is read-only and can be modified only by the kernel code. BPF ringbuf
data pages are read-only as well and are not meant to be modified by
user-code to maintain integrity of per-record headers.
This patch allows to map only consumer position page as writeable and
everything else is restricted to be read-only. remap_vmalloc_range()
internally adds VM_DONTEXPAND, so all the established memory mappings can't be
extended, which prevents any future violations through mremap()'ing.
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Reported-by: Ryota Shiga (Flatt Security)
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
A BPF program might try to reserve a buffer larger than the ringbuf size.
If the consumer pointer is way ahead of the producer, that would be
successfully reserved, allowing the BPF program to read or write out of
the ringbuf allocated area.
Reported-by: Ryota Shiga (Flatt Security)
Fixes: 457f44363a ("bpf: Implement BPF ring buffer and verifier support for it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
The recently introduced MIDI endpoint parser code has an access to the
field without the size validation, hence it might lead to
out-of-bounce access. Add the sanity checks for the descriptor
sizes.
Fixes: eb596e0fd1 ("ALSA: usb-audio: generate midi streaming substream names from jack names")
Link: https://lore.kernel.org/r/20210511090500.2637-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
While fixing undefined behaviour the commit f60d7270c8 ("spi: Avoid
undefined behaviour when counting unused native CSs") missed the case
when all CSs are GPIOs and thus unused_native_cs will be evaluated to
-1 in unsigned representation. This will falsely trigger a condition
in the spi_get_gpio_descs().
Switch to signed types for *_native_cs SPI controller fields to fix above.
Fixes: f60d7270c8 ("spi: Avoid undefined behaviour when counting unused native CSs")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20210510131242.49455-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
"o" isn't a common asm() constraint to use; it triggers an assertion in
assert-enabled builds of LLVM that it's not recognized when targeting
aarch64 (though it appears to fall back to "m"). It's fixed in LLVM 13 now,
but there isn't really a good reason to use "o" in particular here. To
avoid causing build issues for those using assert-enabled builds of earlier
LLVM versions, the constraint needs changing.
Instead, if the point is to retain the __builtin_alloca(), make ptr appear
to "escape" via being an input to an empty inline asm block. This is
preferable anyways, since otherwise this looks like a dead store.
While the use of "r" was considered in
https://lore.kernel.org/lkml/202104011447.2E7F543@keescook/
it was only tested as an output (which looks like a dead store, and wasn't
sufficient).
Use "r" as an input constraint instead, which behaves correctly across
compilers and architectures.
Fixes: 39218ff4c6 ("stack: Optionally randomize kernel stack offset each syscall")
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Kees Cook <keescook@chromium.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Link: https://reviews.llvm.org/D100412
Link: https://bugs.llvm.org/show_bug.cgi?id=49956
Link: https://lore.kernel.org/r/20210419231741.4084415-1-keescook@chromium.org
Fix a bug in the verifier's scalar32_min_max_*() functions which leads to
incorrect tracking of 32 bit bounds for the simulation of and/or/xor bitops.
When both the src & dst subreg is a known constant, then the assumption is
that scalar_min_max_*() will take care to update bounds correctly. However,
this is not the case, for example, consider a register R2 which has a tnum
of 0xffffffff00000000, meaning, lower 32 bits are known constant and in this
case of value 0x00000001. R2 is then and'ed with a register R3 which is a
64 bit known constant, here, 0x100000002.
What can be seen in line '10:' is that 32 bit bounds reach an invalid state
where {u,s}32_min_value > {u,s}32_max_value. The reason is scalar32_min_max_*()
delegates 32 bit bounds updates to scalar_min_max_*(), however, that really
only takes place when both the 64 bit src & dst register is a known constant.
Given scalar32_min_max_*() is intended to be designed as closely as possible
to scalar_min_max_*(), update the 32 bit bounds in this situation through
__mark_reg32_known() which will set all {u,s}32_{min,max}_value to the correct
constant, which is 0x00000000 after the fix (given 0x00000001 & 0x00000002 in
32 bit space). This is possible given var32_off already holds the final value
as dst_reg->var_off is updated before calling scalar32_min_max_*().
Before fix, invalid tracking of R2:
[...]
9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
9: (5f) r2 &= r3
10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=1,s32_max_value=0,u32_min_value=1,u32_max_value=0) R3_w=inv4294967298 R10=fp0
[...]
After fix, correct tracking of R2:
[...]
9: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=-9223372036854775807 (0x8000000000000001),smax_value=9223372032559808513 (0x7fffffff00000001),umin_value=1,umax_value=0xffffffff00000001,var_off=(0x1; 0xffffffff00000000),s32_min_value=1,s32_max_value=1,u32_min_value=1,u32_max_value=1) R3_w=inv4294967298 R10=fp0
9: (5f) r2 &= r3
10: R0_w=inv1337 R1=ctx(id=0,off=0,imm=0) R2_w=inv(id=0,smin_value=0,smax_value=4294967296 (0x100000000),umin_value=0,umax_value=0x100000000,var_off=(0x0; 0x100000000),s32_min_value=0,s32_max_value=0,u32_min_value=0,u32_max_value=0) R3_w=inv4294967298 R10=fp0
[...]
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Fixes: 2921c90d47 ("bpf: Fix a verifier failure with xor")
Reported-by: Manfred Paul (@_manfp)
Reported-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
commit 6579c8d97a ("clk: Mark fwnodes when their clock provider is added")
revealed that clk/bcm/clk-raspberrypi.c driver calls
devm_of_clk_add_hw_provider(), with a NULL dev->of_node, which resulted in a
NULL pointer dereference in of_clk_add_hw_provider() when calling
fwnode_dev_initialized().
Returning 0 is reducing the if conditions in driver code and is being
consistent with the CONFIG_OF=n inline stub that returns 0 when CONFIG_OF
is disabled. The downside is that drivers will maybe register clkdev lookups
when they don't need to and waste some memory.
Fixes: 6579c8d97a ("clk: Mark fwnodes when their clock provider is added")
Fixes: 3c9ea42802 ("clk: Mark fwnodes when their clock provider is added/removed")
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Reviewed-by: Nicolas Saenz Julienne <nsaenz@kernel.org>
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Link: https://lore.kernel.org/r/20210426065618.588144-1-tudor.ambarus@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Lorenz Bauer says:
====================
github.com/cilium/ebpf runs integration tests with libbpf in a vm on CI.
I recently did some work to increase the code coverage from that, and
started experiencing OOM-kills in the VM. That led me down a rabbit
hole looking at verifier memory allocation patterns. I didn't figure out
what triggered the OOM-kills but refactored some often called memory
allocation code.
The key insight is that often times we don't need to do a full kfree /
kmalloc, but can instead just reallocate. The first patch adds two helpers
which do just that for the use cases in the verifier, which are sufficiently
different that they can't use stock krealloc_array and friends.
The series makes bpf_verif_scale about 10% faster in my VM set up, which
is especially noticeable when running with KASAN enabled.
====================
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
func_states_equal makes a very short lived allocation for idmap,
probably because it's too large to fit on the stack. However the
function is called quite often, leading to a lot of alloc / free
churn. Replace the temporary allocation with dedicated scratch
space in struct bpf_verifier_env.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Edward Cree <ecree.xilinx@gmail.com>
Link: https://lore.kernel.org/bpf/20210429134656.122225-4-lmb@cloudflare.com
Resizing and copying stack and reference tracking state currently
does a lot of kfree / kmalloc when the size of the tracked set changes.
The logic in copy_*_state and realloc_*_state is also hard to follow.
Refactor this into two core functions. copy_array copies from a source
into a destination. It avoids reallocation by taking the allocated
size of the destination into account via ksize(). The function is
essentially krealloc_array, with the difference that the contents of
dst are not preserved. realloc_array changes the size of an array and
zeroes newly allocated items. Contrary to krealloc both functions don't
free the destination if the size is zero. Instead we rely on free_func_state
to clean up.
realloc_stack_state is renamed to grow_stack_state to better convey
that it never shrinks the stack state.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210429134656.122225-2-lmb@cloudflare.com
- Fix swapping of cpu_map and stat_config records.
- Fix dynamic libbpf linking.
- Disallow -c and -F option at the same time in 'perf record'.
- Update headers with the kernel originals.
- Silence warning for JSON ArchStd files.
- Fix a build error on arm64 with clang.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYJls5AAKCRCyPKLppCJ+
J5dwAQDU/rlV0hgXT547BmLLQV8oMjOUeEEzdHtpd0R4Q36UEQEAyPacR5bfH8cZ
u2hfq2SyeMJnoDSPRQrsXQFvVK/xYQs=
=b5bE
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix swapping of cpu_map and stat_config records.
- Fix dynamic libbpf linking.
- Disallow -c and -F option at the same time in 'perf record'.
- Update headers with the kernel originals.
- Silence warning for JSON ArchStd files.
- Fix a build error on arm64 with clang.
* tag 'perf-tools-fixes-for-v5.13-2021-05-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools headers UAPI: Sync perf_event.h with the kernel sources
tools headers cpufeatures: Sync with the kernel sources
tools include UAPI powerpc: Sync errno.h with the kernel headers
tools arch: Update arch/x86/lib/mem{cpy,set}_64.S copies used in 'perf bench mem memcpy'
tools headers UAPI: Sync linux/prctl.h with the kernel sources
tools headers UAPI: Sync files changed by landlock, quotactl_path and mount_settattr new syscalls
perf tools: Fix a build error on arm64 with clang
tools headers kvm: Sync kvm headers with the kernel sources
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tools: Fix dynamic libbpf link
perf session: Fix swapping of cpu_map and stat_config records
perf jevents: Silence warning for ArchStd files
perf record: Disallow -c and -F option at the same time
tools arch x86: Sync the msr-index.h copy with the kernel sources
tools headers UAPI: Sync drm/i915_drm.h with the kernel sources
tools headers UAPI: Update tools's copy of drm.h headers
Matteo Croce says:
====================
mvpp2: resolve two warnings
Just two small changes to suppress two warnings.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove some unreachable code, so to suppress this warning:
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c: In function ‘mvpp2_prs_tcam_first_free’:
drivers/net/ethernet/marvell/mvpp2/mvpp2_prs.c:397:10: warning: comparison is always false due to limited range of data type [-Wtype-limits]
397 | if (end >= MVPP2_PRS_TCAM_SRAM_SIZE)
| ^~
Fixes: 3f518509de ("ethernet: Add new driver for Marvell Armada 375 network unit")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
mvpp2_run_xdp() has an unused parameter rxq, remove it.
Fixes: 07dd0a7aae ("mvpp2: add basic XDP support")
Signed-off-by: Matteo Croce <mcroce@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andy Shevchenko says:
====================
net: pch_gbe: fix and a few cleanups
The series provides one fix (patch 1) for GPIO to be able to wait for
the GPIO driver to appear. This is separated from the conversion to
the GPIO descriptors (patch 2) in order to have a possibility for
backporting. Patches 3 and 4 fix minor warnings from Sparse while
moving to a new APIs. Patch 5 is MODULE_VERSION() clean up.
Tested on Intel Minnowboard (v1).
Since v3:
- rebased on top of v5.13-rc1
- added Tested-by (Flavio)
- added Reported-by to certain changes (LKP)
Since v2:
- added a few cleanups on top of the fix
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove MODULE_VERSION(), as it doesn't seem to serve any practical purpose.
For in-tree drivers, the kernel version matters. The code received lots of
changes, but module version remained constant, since the driver landed in
mainline. So, this version doesn't seem have any practical meaning anymore.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Flavio Suligoi <f.suligoi@asem.it>
Signed-off-by: David S. Miller <davem@davemloft.net>
