There's no need to look it up from the ifmgd->associated
BSS configuration, we already maintain a local copy since
commit b0140fda62 ("mac80211: mlme: save ssid info to
ieee80211_bss_conf while assoc").
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
There are 2 ways an engine can get reset in i915 and the method of reset
affects how KMD labels a context as guilty/innocent.
(1) GuC initiated engine-reset: GuC resets a hung engine and notifies
KMD. The context that hung on the engine is marked guilty and all other
contexts are innocent. The innocent contexts are resubmitted.
(2) GT based reset: When an engine heartbeat fails to tick, KMD
initiates a gt/chip reset. All active contexts are marked as guilty and
discarded.
In order to correctly mark the contexts as guilty/innocent, pass a mask
of engines that were reset to __guc_reset_context.
Fixes: eb5e7da736 ("drm/i915/guc: Reset implementation for new GuC interface")
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Alan Previn <alan.previn.teres.alexis@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220426003045.3929439-1-umesh.nerlige.ramappa@intel.com
(cherry picked from commit 303760aa91)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Bspec has added some steps that check forDMC MMIO range before
programming them
v2: Fix for CI
v3: move register defines to .h (Anusha)
- Check MMIO restrictions per pipe
- Add MMIO restricton for v1 dmc header as well (Lucas)
v4: s/_PICK/_PICK_EVEN and use it only for Pipe DMC scenario.
- clean up sanity check logic.(Lucas)
- Add MMIO range for RKL as well.(Anusha)
v5: Use DISPLAY_VER instead of per platform check (Lucas)
BSpec: 49193
Cc: stable@vger.kernel.org
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511000847.1068302-1-anusha.srivatsa@intel.com
(cherry picked from commit 21c47196ae)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Since we always track the BSSID there when we get associated,
these are equivalent, but ifmgd->bssid saves a dereference and
thus makes the code a bit smaller, and more readable.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This code is tightly coupled to the sdata->u.mgd data
structure, so there's no reason for it to be in utils.
Move it to mlme.c.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Ping-Ke's previous patch adjusted the CCMP AAD construction
to properly take the order bit into account, but failed to
update the (identical) GCMP AAD construction as well.
Unify the AAD construction between the two cases.
Reported-by: Jouni Malinen <j@w1.fi>
Link: https://lore.kernel.org/r/20220506105150.51d66e2a6f3c.I65f12be82c112365169e8a9f48c7a71300e814b9@changeid
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
When configuring a nommu classic m68k system enabling the uboot parameter
passing support (CONFIG_UBOOT) will produce the following compile error:
m68k-linux-ld: arch/m68k/kernel/uboot.o: in function `process_uboot_commandline':
uboot.c:(.init.text+0x32): undefined reference to `_init_sp'
The logic to support this option is only used on ColdFire based platforms
(in its head.S startup code). So make the selection of this option
depend on building for a ColdFire based platform.
Reported-by: kernel test robot <lkp@intel.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The RDAMA and TCP transport both complete the timed out request in the
same manner and hence code is duplicated. Add and use the helper
nvmf_complete_timed_out_request() to remove the duplicate code.
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Christoph Hellwig <hch@lst.de>
On our ZynqMP system we observe, that a NVMe drive that resets itself
while doing a firmware update causes a Kernel crash like this:
[ 67.720772] pcieport 0000:02:02.0: pciehp: Slot(2): Link Down
[ 67.720783] pcieport 0000:02:02.0: pciehp: Slot(2): Card not present
[ 67.720795] nvme 0000:04:00.0: PME# disabled
[ 67.720849] Internal error: synchronous external abort: 96000010 [#1] PREEMPT SMP
[ 67.720853] nwl-pcie fd0e0000.pcie: Slave error
Analysis: When nvme_dev_disable() is called because of this PCIe hotplug
event, pci_is_enabled() is still true. And accessing the NVMe drive
which is currently not available as it's in reboot process causes this
"synchronous external abort" on this ARM64 platform.
This patch adds the pci_device_is_present() check as well, which returns
false in this "Card not present" hot-plug case. With this change, the
NVMe driver does not try to access the NVMe registers any more and the
FW update finishes without any problems.
Signed-off-by: Stefan Roese <sr@denx.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
In nvme_alloc_admin_tags, the admin_q can be set to an error (typically
-ENOMEM) if the blk_mq_init_queue call fails to set up the queue, which
is checked immediately after the call. However, when we return the error
message up the stack, to nvme_reset_work the error takes us to
nvme_remove_dead_ctrl()
nvme_dev_disable()
nvme_suspend_queue(&dev->queues[0]).
Here, we only check that the admin_q is non-NULL, rather than not
an error or NULL, and begin quiescing a queue that never existed, leading
to bad / NULL pointer dereference.
Signed-off-by: Kyle Smith <kyles@hpe.com>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Most of the internal passthru commands use __nvme_submit_sync_cmd()
interface. There are few places we open code the request submission :-
1. nvme_keep_alive_work(struct work_struct *work)
2. nvme_timeout(struct request *req, bool reserved)
3. nvme_delete_queue(struct nvme_queue *nvmeq, u8 opcode)
Mark the internal passthru request quiet so that we can skip the verbose
error message from nvme_log_error() in nvme_end_req() completion path,
this will be consistent with what we have in __nvme_submit_sync_cmd().
Signed-off-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Alan Adamson <alan.adamson@oracle.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Log a few more path related status codes.
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The nvme specification only requires qword alignment for segment
descriptors, and the driver already guarantees that. The spec has always
allowed user data to be dword aligned, which is what the queue's
attribute is for, so relax the alignment requirement to that value.
While we could allow byte alignment for some controllers when using
SGLs, we still need to support PRP, and that only allows dword.
Fixes: 3b2a1ebceb ("nvme: set dma alignment to qword")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Christoph Hellwig <hch@lst.de>
DMRSLl is in the unit of logical blocks, while max_discard_sectors is
in the unit of "linux sector".
Signed-off-by: Tom Yan <tom.ty89@gmail.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
The m68k architecture code is capable of supporting the binfmt_elf_fdpic
loader, so allow it to be configured. It is restricted to nommu
configurations at this time due to the MMU context structures/code not
supporting everything elf_fdpic needs when MMU is enabled.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add a few required defines to support using the binfmt_elf_fdpic
loader on the m68k architecture. The values are defined to be consistent
with those used on arm and sh which support this too.
The most important m68k specific change is the register initialization.
The pt_reg structure only contains a subset of the architecture general
registers, so we are more limited than to be expected on what can be used.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Add code support to the m68k architecture for regsets.
Currently the only thing that will need to use regsets for m68k will be
coredump support of the elf_fdpic loader. So the changes are conditional
on that. The added support is the minimum definitions required to support
just that.
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The nommu case defines its own local mm_context_t structure. There is
nothing special or different about the m68knommu version of this and it
can easily use the common asm-generic version.
Remove the local mmu_context struct and include the asm-generic version
instead. This will also make it easier to support ELF format executables
in the future (since the asm-generic version has support for this
already).
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
After a build regression report, I took a look at possible users of
CONFIG_ISA_DMA_API on m68k and found none, which Greg confirmed. The
CONFIG_GENERIC_ISA_DMA option in turn is only needed to implement
ISA_DMA_API, and is clearly not used on the platforms with ISA support.
The CONFIG_ISA support for AMIGA_PCMCIA is probably also unneeded,
but this is less clear. Unlike other PCMCIA implementations, this one
does not use the drivers/pcmcia subsystem at all and just supports
the "apne" network driver. When it was first added, one could use
ISA drivers on it as well, but this probably broke at some point.
With no reason to keep this, let's just drop the corresponding files
and prevent the remaining ISA drivers that use this from getting built.
The remaining definitions in asm/dma.h are used for PCI support.
Link: https://lore.kernel.org/lkml/9e5ee1c3-ca80-f343-a1f5-66f3dd1c0727@linux-m68k.org/
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org> # For MMC
Acked-by: Greg Ungerer <gerg@linux-m68k.org>
Acked-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
The non-MMU m68k pagetable ZERO_PAGE() macro is being set to the
somewhat non-sensical value of "virt_to_page(0)". The zeroth page
is not in any way guaranteed to be a page full of "0". So the result
is that ZERO_PAGE() will almost certainly contain random values.
We already allocate a real "empty_zero_page" in the mm setup code shared
between MMU m68k and non-MMU m68k. It is just not hooked up to the
ZERO_PAGE() macro for the non-MMU m68k case.
Fix ZERO_PAGE() to use the allocated "empty_zero_page" pointer.
I am not aware of any specific issues caused by the old code.
Link: https://lore.kernel.org/linux-m68k/2a462b23-5b8e-bbf4-ec7d-778434a3b9d7@google.com/T/#t
Reported-by: Hugh Dickens <hughd@google.com>
Signed-off-by: Greg Ungerer <gerg@linux-m68k.org>
It is overkill to crash the kernel if the `din` buffer is going to full
or overflow.
Drop the BUG_ON() and return -EINVAL instead.
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-8-tzungbi@kernel.org
In the context, the following conditions are always false:
- `todo` < 0
Suppose that EC_SPI_FRAME_START is found at the last byte of transfer.
In the case, `ptr` == `end` - 1. As a result, `todo` must be 0.
- `todo` > `ec_dev->din_size`
Suppose that there is no preamble bytes. EC_SPI_FRAME_START is found at
the first byte of transfer.
In the case, `end` == `ptr` + EC_MSG_PREAMBLE_COUNT.
As a result, `todo` == EC_MSG_PREAMBLE_COUNT - 1.
However, it already checked `ec_dev->din_size` < EC_MSG_PREAMBLE_COUNT at
the beginning of function.
Drop the unneeded BUG_ON().
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-7-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-6-tzungbi@kernel.org
It is overkill to crash the kernel if the `ec_dev` doesn't support MKBP
event but gets called into cros_ec_get_host_event().
Drop the BUG_ON() and return error (0 in the case) instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-5-tzungbi@kernel.org
It is overkill to crash the kernel if the given message is oversize.
Drop the BUG_ON() and return -EINVAL instead.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-4-tzungbi@kernel.org
cros_ec_prepare_tx() returns either:
- >= 0 for number of prepared bytes.
- < 0 for -errno.
Correct the comment and make sure all callers check the return code.
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-3-tzungbi@kernel.org
prepare_packet() gets called if `ec_dev->proto_version` > 2. For now, it
must be equivalent to EC_HOST_REQUEST_VERSION.
Drop the BUG_ON().
Reviewed-by: Guenter Roeck <groeck@chromium.org>
Signed-off-by: Tzung-Bi Shih <tzungbi@kernel.org>
Link: https://lore.kernel.org/r/20220513044143.1045728-2-tzungbi@kernel.org
The TODO list in drivers/cdrom/cdrom.c has a single entry containing
obsolete information, unchanged since the first git commit over 17 years
ago, and probably longer. Remove this list from the comment to prevent
confusion in future.
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-6-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The last traces of the IDE driver went away in commit b7fb14d3ac
("ide: remove the legacy ide driver") but it left behind some traces
of old documentation.
As luck would have it Randy and I would submit similar changes within
a week of each other to address this. As Randy's commit is in the doc
tree already - this delta is just the stuff my removal contained that
was not in Randy's IDE doc removal.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Phillip Potter <phil@philpotter.co.uk>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/all/20220427165917.GE12977@windriver.com
[phil@philpotter.co.uk: removed diffs already added by others]
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-5-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
These were only implemented by the IDE CD driver, which has since
been removed. Given that nobody is likely to create new CD/DVD
hardware (and associated drivers) we can mark these appropriately.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Phillip Potter <phil@philpotter.co.uk>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Link: https://lore.kernel.org/all/20220427132436.12795-3-paul.gortmaker@windriver.com
Signed-off-by: Phillip Potter <phil@philpotter.co.uk>
Link: https://lore.kernel.org/r/20220515205833.944139-4-phil@philpotter.co.uk
Signed-off-by: Jens Axboe <axboe@kernel.dk>
There are no code changes here; this is just a reordering of functions,
so that in subsequent commits, the timer entropy functions can call into
the interrupt ones.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Convert rockchip,rv1108-cru.txt to YAML.
Changes against original bindings:
Add clocks and clock-names because the device has to have
at least one input clock.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220330131608.30040-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
When a kernel is built with CONFIG_ARM64_PSEUDO_NMI=y and pseudo-NMIs
are enabled at runtime, GICv3's gic_handle_irq() can leave DAIF and
ICC_PMR_EL1 in an unexpected state in some cases, breaking subsequent
usage of local_irq_enable() and resulting in softirqs being run with
IRQs erroneously masked (possibly resulting in deadlocks).
This can happen when an IRQ exception is taken from a context where
regular IRQs were unmasked, and either:
(1) ICC_IAR1_EL1 indicates a special INTID (e.g. as a result of an IRQ
being withdrawn since the IRQ exception was taken).
(2) ICC_IAR1_EL1 and ICC_RPR_EL1 indicate an NMI was acknowledged.
When an NMI is taken from a context where regular IRQs were masked,
there is no problem.
When CONFIG_ARM64_DEBUG_PRIORITY_MASKING=y, this can be detected with
perf, e.g.
| # ./perf record -a -g -e cycles:k ls -alR / > /dev/null 2>&1
| ------------[ cut here ]------------
| WARNING: CPU: 0 PID: 14 at arch/arm64/include/asm/irqflags.h:32 arch_local_irq_enable+0x4c/0x6c
| Modules linked in:
| CPU: 0 PID: 14 Comm: ksoftirqd/0 Not tainted 5.18.0-rc5-00004-g876c38e3d20b #12
| Hardware name: linux,dummy-virt (DT)
| pstate: 204000c5 (nzCv daIF +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
| pc : arch_local_irq_enable+0x4c/0x6c
| lr : __do_softirq+0x110/0x5d8
| sp : ffff8000080bbbc0
| pmr_save: 000000f0
| x29: ffff8000080bbbc0 x28: ffff316ac3a6ca40 x27: 0000000000000000
| x26: 0000000000000000 x25: ffffa04611c06008 x24: ffffa04611c06008
| x23: 0000000040400005 x22: 0000000000000200 x21: ffff8000080bbe20
| x20: ffffa0460fe10320 x19: 0000000000000009 x18: 0000000000000000
| x17: ffff91252dfa9000 x16: ffff800008004000 x15: 0000000000004000
| x14: 0000000000000028 x13: ffffa0460fe17578 x12: ffffa0460fed4294
| x11: ffffa0460fedc168 x10: ffffffffffffff80 x9 : ffffa0460fe10a70
| x8 : ffffa0460fedc168 x7 : 000000000000b762 x6 : 00000000057c3bdf
| x5 : ffff8000080bbb18 x4 : 0000000000000000 x3 : 0000000000000001
| x2 : ffff91252dfa9000 x1 : 0000000000000060 x0 : 00000000000000f0
| Call trace:
| arch_local_irq_enable+0x4c/0x6c
| __irq_exit_rcu+0x180/0x1ac
| irq_exit_rcu+0x1c/0x44
| el1_interrupt+0x4c/0xe4
| el1h_64_irq_handler+0x18/0x24
| el1h_64_irq+0x74/0x78
| smpboot_thread_fn+0x68/0x2c0
| kthread+0x124/0x130
| ret_from_fork+0x10/0x20
| irq event stamp: 193241
| hardirqs last enabled at (193240): [<ffffa0460fe10a9c>] __do_softirq+0x10c/0x5d8
| hardirqs last disabled at (193241): [<ffffa0461102ffe4>] el1_dbg+0x24/0x90
| softirqs last enabled at (193234): [<ffffa0460fe10e00>] __do_softirq+0x470/0x5d8
| softirqs last disabled at (193239): [<ffffa0460fea9944>] __irq_exit_rcu+0x180/0x1ac
| ---[ end trace 0000000000000000 ]---
The necessary manipulation of DAIF and ICC_PMR_EL1 depends on the
interrupted context, but the structure of gic_handle_irq() makes this
also depend on whether the GIC reports an IRQ, NMI, or special INTID:
* When the interrupted context had regular IRQs masked (and hence the
interrupt must be an NMI), the entry code performs the NMI
entry/exit and gic_handle_irq() should return with DAIF and
ICC_PMR_EL1 unchanged.
This is handled correctly today.
* When the interrupted context had regular IRQs unmasked, the entry code
performs IRQ entry/exit, but expects gic_handle_irq() to always update
ICC_PMR_EL1 and DAIF.IF to unmask NMIs (but not regular IRQs) prior to
returning (which it must do prior to invoking any regular IRQ
handler).
This unbalanced calling convention is necessary because we don't know
whether an NMI has been taken until acknowledged by a read from
ICC_IAR1_EL1, and so we need to perform the read with NMI masked in
case an NMI has been taken (and needs to be handled with NMIs masked).
Unfortunately, this is not handled consistently:
- When ICC_IAR1_EL1 reports a special INTID, gic_handle_irq() returns
immediately without manipulating ICC_PMR_EL1 and DAIF.
- When RPR_EL1 indicates an NMI, gic_handle_irq() calls
gic_handle_nmi() to invoke the NMI handler, then returns without
manipulating ICC_PMR_EL1 and DAIF.
- For regular IRQs, gic_handle_irq() manipulates ICC_PMR_EL1 and DAIF
prior to invoking the IRQ handler.
There were related problems with special INTID handling in the past,
where if an exception was taken from a context with regular IRQs masked
and ICC_IAR_EL1 reported a special INTID, gic_handle_irq() would
erroneously unmask NMIs in NMI context permitted an unexpected nested
NMI. That case specifically was fixed by commit:
a97709f563 ("irqchip/gic-v3: Do not enable irqs when handling spurious interrups")
... but unfortunately that commit added an inverse problem, where if an
exception was taken from a context with regular IRQs *unmasked* and
ICC_IAR_EL1 reported a special INTID, gic_handle_irq() would erroneously
fail to unmask NMIs (and consequently regular IRQs could not be
unmasked during softirq processing). Before and after that commit, if an
NMI was taken from a context with regular IRQs unmasked gic_handle_irq()
would not unmask NMIs prior to returning, leading to the same problem
with softirq handling.
This patch fixes this by restructuring gic_handle_irq(), splitting it
into separate irqson/irqsoff helper functions which consistently perform
the DAIF + ICC_PMR1_EL1 manipulation based upon the interrupted context,
regardless of the event indicated by ICC_IAR1_EL1.
The special INTID handling is moved into the low-level IRQ/NMI handler
invocation helper functions, so that early returns don't prevent the
required manipulation of DAIF + ICC_PMR_EL1.
Fixes: f32c926651 ("irqchip/gic-v3: Handle pseudo-NMIs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-4-mark.rutland@arm.com
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised. To fix this, we place an ISB between a read of
IAR and the subsequent invocation of an IRQ handler.
When EOI mode 1 is in use, we need to EOI an interrupt prior to invoking
its handler, and we have a write to EOIR for this. As this write to EOIR
requires an ISB, and this is provided by the gic_write_eoir() helper, we
omit the usual ISB in this case, with the logic being:
| if (static_branch_likely(&supports_deactivate_key))
| gic_write_eoir(irqnr);
| else
| isb();
This is somewhat opaque, and it would be a little clearer if there were
an unconditional ISB, with only the write to EOIR being conditional,
e.g.
| if (static_branch_likely(&supports_deactivate_key))
| write_gicreg(irqnr, ICC_EOIR1_EL1);
|
| isb();
This patch rewrites the code that way, with this logic factored into a
new helper function with comments explaining what the ISB is for, as
were originally laid out in commit:
39a06b67c2 ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Note that since then, we removed the IAR polling in commit:
342677d70a ("irqchip/gic-v3: Remove acknowledge loop")
... which removed one of the two race conditions.
For consistency, other portions of the driver are made to manipulate
EOIR using write_gicreg() and explcit ISBs, and the gic_write_eoir()
helper function is removed.
There should be no functional change as a result of this patch.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-3-mark.rutland@arm.com
There are cases where a context synchronization event is necessary
between an IRQ being raised and being handled, and there are races such
that we cannot rely upon the exception entry being subsequent to the
interrupt being raised.
We identified and fixes this for regular IRQs in commit:
39a06b67c2 ("irqchip/gic: Ensure we have an ISB between ack and ->handle_irq")
Unfortunately, we forgot to do the same for psuedo-NMIs when support for
those was added in commit:
f32c926651 ("irqchip/gic-v3: Handle pseudo-NMIs")
Which means that when pseudo-NMIs are used for PMU support, we'll hit
the same problem.
Apply the same fix as for regular IRQs. Note that when EOI mode 1 is in
use, the call to gic_write_eoir() will provide an ISB.
Fixes: f32c926651 ("irqchip/gic-v3: Handle pseudo-NMIs")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will.deacon@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20220513133038.226182-2-mark.rutland@arm.com
Here is one fix, and 3 documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for quite
some time.
The documentation updates are for the embargoed-hardware-issues.rst file
to add a new entry, change an existing one, and sort the list to make
changes easier in the future.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEMSw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynl8wCgw54h8hggK6eikgctGuyoLJZjDR4AnRVNvtQi
ItQ1+zHzBjkdz1s/DlM7
=/7MV
-----END PGP SIGNATURE-----
Merge tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here is one fix, and three documentation updates for 5.18-rc7.
The fix is for the firmware loader which resolves a long-reported
problem where the credentials of the firmware loader could be set to a
userspace process without enough permissions to actually load the
firmware image. Many Android vendors have been reporting this for
quite some time.
The documentation updates are for the embargoed-hardware-issues.rst
file to add a new entry, change an existing one, and sort the list to
make changes easier in the future.
All of these have been in linux-next for a while with no reported
issues"
* tag 'driver-core-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
Documentation/process: Update ARM contact for embargoed hardware issues
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
Here are 2 small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoELfQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yn1EACeMMP4A10lS7sKlgyM6ftMKA1hu7UAniih+zD/
yGi9Fx4SxUUhYKelF75P
=n7+j
-----END PGP SIGNATURE-----
Merge tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"Here are two small driver fixes for 5.18-rc7 that resolve reported
problems:
- slimbus driver irq bugfix
- interconnect sync state bugfix
Both of these have been in linux-next with no reported problems"
* tag 'char-misc-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
slimbus: qcom: Fix IRQ check in qcom_slim_probe
interconnect: Restore sync state by ignoring ipa-virt in provider count
Here are some small tty n_gsm and serial driver fixes for 5.18-rc7 that
resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoEM8g8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylkRgCePwdlqU8cJAePVKVEQVbBmqV2DQgAoL4aGeH7
/4ZvKAc/3AmUOBU+46sa
=my19
-----END PGP SIGNATURE-----
Merge tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty n_gsm and serial driver fixes for 5.18-rc7
that resolve reported problems. They include:
- n_gsm fixes for reported issues
- 8250_mtk driver fixes for some platforms
- fsl_lpuart driver fix for reported problem.
- digicolor driver fix for reported problem.
All have been in linux-next for a while with no reported problems"
* tag 'tty-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYoENmA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ymxrwCeIzUtnkEw80tyjr3r/ciuZgfqM90AoJ50aiIV
YqYG8aVcUUrM47qQuYUX
=I21N
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small fixes for reported issues with some USB drivers.
They include:
- xhci fixes for xhci-mtk platform driver
- typec driver fixes for reported problems.
- cdc-wdm read-stuck fix
- gadget driver fix for reported race condition
- new usb-serial driver ids
All of these have been in linux-next with no reported problems"
* tag 'usb-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
usb: xhci-mtk: remove bandwidth budget table
usb: xhci-mtk: fix fs isoc's transfer error
usb: gadget: fix race when gadget driver register via ioctl
usb: typec: tcpci_mt6360: Update for BMC PHY setting
usb: gadget: uvc: allow for application to cleanly shutdown
usb: typec: tcpci: Don't skip cleanup in .remove() on error
usb: cdc-wdm: fix reading stuck on device close
USB: serial: qcserial: add support for Sierra Wireless EM7590
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, Matt Evans.
-----BEGIN PGP SIGNATURE-----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=HVUs
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- Fix KVM PR on 32-bit, which was broken by some MMU code refactoring.
Thanks to: Alexander Graf, and Matt Evans.
* tag 'powerpc-5.18-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
pasta from the corresponding s390 code screwed up the address calculation
for marking the sub-pmd ranges via memset by omitting the ALIGN_DOWN() to
calculate the proper start address. It's a mystery why this code is not
generic and shared because there is nothing architecture specific in there,
but that's too intrusive for a backportable fix.
-----BEGIN PGP SIGNATURE-----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=f+jf
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fix from Thomas Gleixner:
"A single fix for the handling of unpopulated sub-pmd spaces.
The copy & pasta from the corresponding s390 code screwed up the
address calculation for marking the sub-pmd ranges via memset by
omitting the ALIGN_DOWN() to calculate the proper start address.
It's a mystery why this code is not generic and shared because there
is nothing architecture specific in there, but that's too intrusive
for a backportable fix"
* tag 'x86-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Fix marking of unused sub-pmd ranges
in the middle of the arguments. This reordering broke BPF programs which
relied on the old argument list. While tracepoints are not considered
stable ABI, it's not trivial to make BPF cope with such a change, but it's
being worked on. For now restore the original argument order and move the
new argument to the end of the argument list.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAmKAxKQTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoThID/4jp/8GiKsf1jPgKkU39Yw7qAePzObQ
V9K2XLxSwH27D+UpmOPODnckzHJMtX0M4Z+sGMgGSPe/IvOVj+NEmUiQGU29sDwg
T7If2FSHMutPCB9QL26kxjmebU+SdllRwrJylOA1ZNduunczxKlpATJ5vneCC/Qt
D5VpB3XlwT31pd9UdoW/kV5uQK6bFR7qREWXhONZ+HyzsKJdV0vGe2ZX6U7ek2/d
XJxETE1eXlsMr+2VY5lkxhr596uPJgDAM9g+OknO/Lal/I7WoUchDN2giItzn6RY
XWxPK85mE59MwTa6PQCJcO8A7r2KcHfGrbFVjA9h1jhREtsZigb9ZemDgQ+s8goT
znIIlTO2l7ed2VDMU/mt3zZuS0rMshn/8Axk+AN3N6gKffV6F4q0BpZUUccGe+FM
tfQ34YGmMKx6uuyHPPZCQd1buJuDuXNyZF7XFO3uxv9BGt3x42aswAbx1zYIV+ZR
Uj/Vnojoc1aBdffVSUL0he+vjutYixx4gb8nh0ZFa5FTe70XDvPGTUTTOSW6BOq0
yiFOWtG8MbziVBDE2iKmfUMT+dPQd0+PW8szk8J9yOJyOnTu9y6KkyWl2JRllSxT
Qv7icnMN5P1xqN/c4P+8Iq0CrVItyxMJ0Ouc29tsNPHYkzsBo4c0XAn94mib1O17
zyJYW0F9UVHOSg==
=6Bvx
-----END PGP SIGNATURE-----
Merge tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fix from Thomas Gleixner:
"The recent expansion of the sched switch tracepoint inserted a new
argument in the middle of the arguments. This reordering broke BPF
programs which relied on the old argument list.
While tracepoints are not considered stable ABI, it's not trivial to
make BPF cope with such a change, but it's being worked on. For now
restore the original argument order and move the new argument to the
end of the argument list"
* tag 'sched-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/tracing: Append prev_state to tp args instead
interrupt code. The consolidation of the interrupt handler invocation code
added an unconditional warning when generic_handle_domain_irq() is invoked
from outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required for
certain interrupt types. The subsequently called code already contains a
warning which triggers conditionally for interrupt chips which indicate
this requirement in their properties. Remove the overbroad one.
-----BEGIN PGP SIGNATURE-----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=pJj8
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for a recent (introduced in 5.16) regression in the core
interrupt code.
The consolidation of the interrupt handler invocation code added an
unconditional warning when generic_handle_domain_irq() is invoked from
outside hard interrupt context. That's overbroad as the requirement
for invoking these handlers in hard interrupt context is only required
for certain interrupt types. The subsequently called code already
contains a warning which triggers conditionally for interrupt chips
which indicate this requirement in their properties.
Remove the overbroad one"
* tag 'irq-urgent-2022-05-15' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
