Clean up: The "out" label already invokes fh_drop_write().
Note that fh_drop_write() is already careful not to invoke
mnt_drop_write() if either it has already been done or there is
nothing to drop. Therefore no change in behavior is expected.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
As near as I can tell, mode bit masking and setting S_IFREG is
already done by do_nfsd_create() and vfs_create(). The NFSv4 path
(do_open_lookup), for example, does not bother with this special
processing.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
This contains a new ticket-based spinlock that uses only generic
atomics and doesn't require as much from the memory system as qspinlock
does in order to be fair. It also includes a bit of documentation about
the qspinlock and qrwlock fairness requirements.
This will soon be used by a handful of architectures that don't meet the
qspinlock requirements.
-----BEGIN PGP SIGNATURE-----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=Ti7k
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=U6/l
-----END PGP SIGNATURE-----
Merge tag 'generic-ticket-spinlocks-v6' into for-next
asm-generic: New generic ticket-based spinlock
This contains a new ticket-based spinlock that uses only generic
atomics and doesn't require as much from the memory system as qspinlock
does in order to be fair. It also includes a bit of documentation about
the qspinlock and qrwlock fairness requirements.
This will soon be used by a handful of architectures that don't meet the
qspinlock requirements.
* tag 'generic-ticket-spinlocks-v6':
csky: Move to generic ticket-spinlock
RISC-V: Move to queued RW locks
RISC-V: Move to generic spinlocks
openrisc: Move to ticket-spinlock
asm-generic: qrwlock: Document the spinlock fairness requirements
asm-generic: qspinlock: Indicate the use of mixed-size atomics
asm-generic: ticket-lock: New generic ticket-based spinlock
In kvm_hv_flush_tlb(), valid_bank_mask is declared as unsigned long,
but is used as u64, which is wrong for i386, and has been spotted by
LKP after applying "KVM: x86: hyper-v: replace bitmap_weight() with
hweight64()"
https://lore.kernel.org/lkml/20220510154750.212913-12-yury.norov@gmail.com/
But it's wrong even without that patch because now bitmap_weight()
dereferences a word after valid_bank_mask on i386.
>> include/asm-generic/bitops/const_hweight.h:21:76: warning: right shift count >= width of type
+[-Wshift-count-overflow]
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~
include/asm-generic/bitops/const_hweight.h:10:16: note: in definition of macro '__const_hweight8'
10 | ((!!((w) & (1ULL << 0))) + \
| ^
include/asm-generic/bitops/const_hweight.h:20:31: note: in expansion of macro '__const_hweight16'
20 | #define __const_hweight32(w) (__const_hweight16(w) + __const_hweight16((w) >> 16))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:21:54: note: in expansion of macro '__const_hweight32'
21 | #define __const_hweight64(w) (__const_hweight32(w) + __const_hweight32((w) >> 32))
| ^~~~~~~~~~~~~~~~~
include/asm-generic/bitops/const_hweight.h:29:49: note: in expansion of macro '__const_hweight64'
29 | #define hweight64(w) (__builtin_constant_p(w) ? __const_hweight64(w) : __arch_hweight64(w))
| ^~~~~~~~~~~~~~~~~
arch/x86/kvm/hyperv.c:1983:36: note: in expansion of macro 'hweight64'
1983 | if (hc->var_cnt != hweight64(valid_bank_mask))
| ^~~~~~~~~
CC: Borislav Petkov <bp@alien8.de>
CC: Dave Hansen <dave.hansen@linux.intel.com>
CC: H. Peter Anvin <hpa@zytor.com>
CC: Ingo Molnar <mingo@redhat.com>
CC: Jim Mattson <jmattson@google.com>
CC: Joerg Roedel <joro@8bytes.org>
CC: Paolo Bonzini <pbonzini@redhat.com>
CC: Sean Christopherson <seanjc@google.com>
CC: Thomas Gleixner <tglx@linutronix.de>
CC: Vitaly Kuznetsov <vkuznets@redhat.com>
CC: Wanpeng Li <wanpengli@tencent.com>
CC: kvm@vger.kernel.org
CC: linux-kernel@vger.kernel.org
CC: x86@kernel.org
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Yury Norov <yury.norov@gmail.com>
Message-Id: <20220519171504.1238724-1-yury.norov@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Fix a goof in kvm_prepare_memory_region() where KVM fails to free the
new memslot's dirty bitmap during a CREATE action if
kvm_arch_prepare_memory_region() fails. The logic is supposed to detect
if the bitmap was allocated and thus needs to be freed, versus if the
bitmap was inherited from the old memslot and thus needs to be kept. If
there is no old memslot, then obviously the bitmap can't have been
inherited
The bug was exposed by commit 86931ff720 ("KVM: x86/mmu: Do not create
SPTEs for GFNs that exceed host.MAXPHYADDR"), which made it trivally easy
for syzkaller to trigger failure during kvm_arch_prepare_memory_region(),
but the bug can be hit other ways too, e.g. due to -ENOMEM when
allocating x86's memslot metadata.
The backtrace from kmemleak:
__vmalloc_node_range+0xb40/0xbd0 mm/vmalloc.c:3195
__vmalloc_node mm/vmalloc.c:3232 [inline]
__vmalloc+0x49/0x50 mm/vmalloc.c:3246
__vmalloc_array mm/util.c:671 [inline]
__vcalloc+0x49/0x70 mm/util.c:694
kvm_alloc_dirty_bitmap virt/kvm/kvm_main.c:1319
kvm_prepare_memory_region virt/kvm/kvm_main.c:1551
kvm_set_memslot+0x1bd/0x690 virt/kvm/kvm_main.c:1782
__kvm_set_memory_region+0x689/0x750 virt/kvm/kvm_main.c:1949
kvm_set_memory_region virt/kvm/kvm_main.c:1962
kvm_vm_ioctl_set_memory_region virt/kvm/kvm_main.c:1974
kvm_vm_ioctl+0x377/0x13a0 virt/kvm/kvm_main.c:4528
vfs_ioctl fs/ioctl.c:51
__do_sys_ioctl fs/ioctl.c:870
__se_sys_ioctl fs/ioctl.c:856
__x64_sys_ioctl+0xfc/0x140 fs/ioctl.c:856
do_syscall_x64 arch/x86/entry/common.c:50
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
And the relevant sequence of KVM events:
ioctl(3, KVM_CREATE_VM, 0) = 4
ioctl(4, KVM_SET_USER_MEMORY_REGION, {slot=0,
flags=KVM_MEM_LOG_DIRTY_PAGES,
guest_phys_addr=0x10000000000000,
memory_size=4096,
userspace_addr=0x20fe8000}
) = -1 EINVAL (Invalid argument)
Fixes: 244893fa28 ("KVM: Dynamically allocate "new" memslots from the get-go")
Cc: stable@vger.kernel.org
Reported-by: syzbot+8606b8a9cc97a63f1c87@syzkaller.appspotmail.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20220518003842.1341782-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
- Add new infrastructure to stop gpiolib from rewriting irq_chip
structures behind our back. Convert a few of them, but this will
obviously be a long effort.
- A bunch of GICv3 improvements, such as using MMIO-based invalidations
when possible, and reducing the amount of polling we perform when
reconfiguring interrupts.
- Another set of GICv3 improvements for the Pseudo-NMI functionality,
with a nice cleanup making it easy to reason about the various
states we can be in when an NMI fires.
- The usual bunch of misc fixes and minor improvements.
-----BEGIN PGP SIGNATURE-----
iQJDBAABCgAtFiEEn9UcU+C1Yxj9lZw9I9DQutE9ekMFAmKGcX8PHG1hekBrZXJu
ZWwub3JnAAoJECPQ0LrRPXpD7kYP/1sbxyRoq7iWqtTDK7ENWvqXh5wu/YZe0pnw
jr0hPrJTdQKUbsBA+pusklEnTHvRgnLOmFpfR3X7apGg/If7mPRZGQcZz3fXKwDA
53u74IzZhYa+fx9H0L1qtBUHJtTP4/IexkzL/84R19u2/ewIhzDyhpvGxA/yAFj+
Gi6bgz93NGMOt/tdNtXZvj5zdr+5BayC6JBpnyzliyxS1xD3YeA0T05fHDYfjrcM
51gUeA/9tA3EWiRzsdZGq6uDaUfBW5aspWu0bZx/WBUWNBvAAjWzhIgNWDW/xKJP
N3t6UQ6+uNYJXvdaCJlBLc6TiXBzGXINgr4oMljg8nJRYLt+xVsadkTnFxlnqoY/
FNeEiOUQqjZ1qcvHJoIceGHgTq//o3VaZ+AnuAESqeNPGavz+LMOCNo7Su+k2+Tk
H3x09+p+SbrzJvRVyboLVk+v74NtzEz1fGrjEzQk2eHw+dc18yz1v+D1EX1REkhM
gjzjSIAgZoq1M3GZL8tyrov44vhG3mUm3jAO01u9fRTHqEee6WIKt0aijSe/sCRr
chTf+S9n8xPsr6AHUPQImV/fSismK4erCJeAiSp+P3hZjqyK8iPsHgiM5YLj50Cl
ry9dACxv6CYf7lMKmKPC/atV1IlJSEZpguc6FLQ2tv9IBWqNMQXve0012acFMr6B
ZpncbECV
=nQxd
-----END PGP SIGNATURE-----
Merge tag 'irqchip-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/maz/arm-platforms into irq/core
Pull irqchip updates from Marc Zyngier:
- Add new infrastructure to stop gpiolib from rewriting irq_chip
structures behind our back. Convert a few of them, but this will
obviously be a long effort.
- A bunch of GICv3 improvements, such as using MMIO-based invalidations
when possible, and reducing the amount of polling we perform when
reconfiguring interrupts.
- Another set of GICv3 improvements for the Pseudo-NMI functionality,
with a nice cleanup making it easy to reason about the various
states we can be in when an NMI fires.
- The usual bunch of misc fixes and minor improvements.
Link: https://lore.kernel.org/all/20220519165308.998315-1-maz@kernel.org
Looks like the IPv6 version of the patch under Fixes was
a copy/paste of the IPv4 but hit the wrong spot.
It is tcp_v6_rcv() which uses drop_reason as a boolean, and
needs to be protected against reason == 0 before calling free.
tcp_v6_do_rcv() has a pretty straightforward flow.
The resulting warning looks like this:
WARNING: CPU: 1 PID: 0 at net/core/skbuff.c:775
Call Trace:
tcp_v6_rcv (net/ipv6/tcp_ipv6.c:1767)
ip6_protocol_deliver_rcu (net/ipv6/ip6_input.c:438)
ip6_input_finish (include/linux/rcupdate.h:726)
ip6_input (include/linux/netfilter.h:307)
Fixes: f8319dfd1b ("net: tcp: reset 'drop_reason' to NOT_SPCIFIED in tcp_v{4,6}_rcv()")
Tested-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Link: https://lore.kernel.org/r/20220520021347.2270207-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Now that random/urandom is using {read,write}_iter, we can wire it up to
using the generic splice handlers.
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Jason: added the splice_write path. Note that sendfile() and such still
does not work for read, though it does for write, because of a file
type restriction in splice_direct_to_actor(), which I'll address
separately.]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Now that the read side has been converted to fix a regression with
splice, convert the write side as well to have some symmetry in the
interface used (and help deprecate ->write()).
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Jason: cleaned up random_ioctl a bit, require full writes in
RNDADDENTROPY since it's crediting entropy, simplify control flow of
write_pool(), and incorporate suggestions from Al.]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This is a pre-requisite to wiring up splice() again for the random
and urandom drivers. It also allows us to remove the INT_MAX check in
getrandom(), because import_single_range() applies capping internally.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[Jason: rewrote get_random_bytes_user() to simplify and also incorporate
additional suggestions from Al.]
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
The driver doesn't take struct pwm_state::polarity into account when
configuring the hardware, so refuse requests for inverted polarity.
Fixes: 757642f9a5 ("gpio: mvebu: Add limited PWM support")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
For gpio controller contain register PDDR, when set one target bit,
current logic will clear all other bits, this is wrong. Use operator
'|=' to fix it.
Fixes: 659d8a6231 ("gpio: vf610: add imx7ulp support")
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Add support for EC_PWM_TYPE_DISPLAY_LIGHT and EC_PWM_TYPE_KB_LIGHT pwm
types to the PWM cros_ec_pwm driver. This allows specifying one of these
PWM channel by functionality, and let the EC firmware pick the correct
channel, thus abstracting the hardware implementation from the kernel
driver.
To use it, define the node with the "google,cros-ec-pwm-type"
compatible.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Update google,cros-ec-pwm node documentation to mention the
google,cros-ec-pwm-type compatible as a valid alternative.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add a dt-bindings include file for cros_ec devicetree definition, define
a pair of special purpose PWM channels in it.
Signed-off-by: Fabio Baltieri <fabiobaltieri@chromium.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Check that suppression is not indicated on injection of a key checked
protection exception caused by a memop after it already modified guest
memory, as that violates the definition of suppression.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-3-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
If user space uses a memop to emulate an instruction and that
memop fails, the execution of the instruction ends.
Instruction execution can end in different ways, one of which is
suppression, which requires that the instruction execute like a no-op.
A writing memop that spans multiple pages and fails due to key
protection may have modified guest memory, as a result, the likely
correct ending is termination. Therefore, do not indicate a
suppressing instruction ending in this case.
Signed-off-by: Janis Schoetterl-Glausch <scgl@linux.ibm.com>
Reviewed-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/r/20220512131019.2594948-2-scgl@linux.ibm.com
Signed-off-by: Christian Borntraeger <borntraeger@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
Adds some selftests to test ioctl error paths of the uv-uapi.
The Kconfig S390_UV_UAPI must be selected and the Ultravisor facility
must be available. The test can be executed by non-root, however, the
uvdevice special file /dev/uv must be accessible for reading and
writing which may imply root privileges.
./test-uv-device
TAP version 13
1..6
# Starting 6 tests from 3 test cases.
# RUN uvio_fixture.att.fault_ioctl_arg ...
# OK uvio_fixture.att.fault_ioctl_arg
ok 1 uvio_fixture.att.fault_ioctl_arg
# RUN uvio_fixture.att.fault_uvio_arg ...
# OK uvio_fixture.att.fault_uvio_arg
ok 2 uvio_fixture.att.fault_uvio_arg
# RUN uvio_fixture.att.inval_ioctl_cb ...
# OK uvio_fixture.att.inval_ioctl_cb
ok 3 uvio_fixture.att.inval_ioctl_cb
# RUN uvio_fixture.att.inval_ioctl_cmd ...
# OK uvio_fixture.att.inval_ioctl_cmd
ok 4 uvio_fixture.att.inval_ioctl_cmd
# RUN attest_fixture.att_inval_request ...
# OK attest_fixture.att_inval_request
ok 5 attest_fixture.att_inval_request
# RUN attest_fixture.att_inval_addr ...
# OK attest_fixture.att_inval_addr
ok 6 attest_fixture.att_inval_addr
# PASSED: 6 / 6 tests passed.
# Totals: pass:6 fail:0 xfail:0 xpass:0 skip:0 error:0
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Acked-by: Janosch Frank <frankja@linux.ibm.com>
Message-Id: <20220510144724.3321985-3-seiden@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220510144724.3321985-3-seiden@linux.ibm.com/
Signed-off-by: Janosch Frank <frankja@linux.ibm.com>
This patch adds a new miscdevice to expose some Ultravisor functions
to userspace. Userspace can send IOCTLs to the uvdevice that will then
emit a corresponding Ultravisor Call and hands the result over to
userspace. The uvdevice is available if the Ultravisor Call facility is
present.
Userspace can call the Retrieve Attestation Measurement
Ultravisor Call using IOCTLs on the uvdevice.
The uvdevice will do some sanity checks first.
Then, copy the request data to kernel space, build the UVCB,
perform the UV call, and copy the result back to userspace.
Signed-off-by: Steffen Eiden <seiden@linux.ibm.com>
Reviewed-by: Janosch Frank <frankja@linux.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Link: https://lore.kernel.org/kvm/20220516113335.338212-1-seiden@linux.ibm.com/
Message-Id: <20220516113335.338212-1-seiden@linux.ibm.com>
Signed-off-by: Janosch Frank <frankja@linux.ibm.com> (whitespace and tristate fixes, pick)
Some (most?) drivers emit the inactive state when the PWM is disabled.
However there are exceptions, so document that a consumer better doesn't
depend on this behaviour.
Some known exceptions:
- imx27 emits 0 independent of the configured polarity
- mxs just drives the output to the last emitted state.
- iqs620a makes the output tristated on disable, so an external
pull-down would be required.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This pushes a variant of pwm_apply_legacy into the driver that was slightly
simplified because the .set_polarity callback was a noop.
There is no change in behavior.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
This just pushed a variant of pwm_apply_legacy() into the driver that was
slightly simplified because the driver doesn't provide a .set_polarity()
callback.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The MediaTek Helio X10 MT6795 SoC has 7 PWMs: add a compatible string
to use the right match data.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Add binding documentation for the MT6795 Helio X10 SoC.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Dividing by the result of a division looses precision because the result is
rounded twice. E.g. with clk_rate = 48000000 and period = 32760033 the
following numbers result:
rate = pc->clk_rate >> PWM_DUTY_WIDTH = 187500
hz = DIV_ROUND_CLOSEST_ULL(100ULL * NSEC_PER_SEC, period_ns) = 3052
rate = DIV_ROUND_CLOSEST_ULL(100ULL * rate, hz) = 6144
The exact result would be 6142.5061875 and (apart from rounding) this is
found by using a single division. As a side effect is also a tad
cheaper to calculate.
Also using clk_rate >> PWM_DUTY_WIDTH looses precision. Consider for
example clk_rate = 47999999 and period = 106667:
mul_u64_u64_div_u64(pc->clk_rate >> PWM_DUTY_WIDTH, period_ns,
NSEC_PER_SEC) = 19
mul_u64_u64_div_u64(pc->clk_rate, period_ns,
NSEC_PER_SEC << PWM_DUTY_WIDTH) = 20
(The exact result is 20.000062083332033.)
With this optimizations also switch from round-closest to round-down for
the period calculation. Given that the calculations were non-optimal for
quite some time now with variations in both directions which nobody
reported as a problem, this is the opportunity to align the driver's
behavior to the requirements of new drivers. This has several upsides:
- Implementation is easier as there are no round-nearest variants of
mul_u64_u64_div_u64().
- Requests for too small periods are now consistently refused. This was
kind of arbitrary before, where period_ns < min_period_ns was
refused, but in some cases min_period_ns isn't actually implementable
and then values between min_period_ns and the actual minimum were
rounded up to the actual minimum.
Note that the duty_cycle calculation isn't using the usual round-down
approach yet.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Dividing by the result of a division looses precision. Consider for example
clk_rate = 33000000 and period_ns = 500001. Then
clk_rate / (NSEC_PER_SEC / period_ns)
has the exact value 16500.033, but in C this evaluates to 16508. It gets
worse for even bigger values of period_ns, so with period_ns = 500000001,
the exact result is 16500000.033 while in C we get 33000000.
For that reason use
clk_rate * period_ns / NSEC_PER_SEC
instead which doesn't suffer from this problem. To ensure this doesn't
overflow add a safeguard check for clk_rate.
Note that duty > period can never happen, so the respective check can be
dropped.
Incidentally this fixes a division by zero if period_ns > NSEC_PER_SEC.
Another side effect is that values bigger than INT_MAX for period and
duty_cyle are not wrongly discarded any more.
Fixes: 99b82abb0a ("pwm: Add Renesas TPU PWM driver")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The newly computed register values are intended to exactly match the
previously computed values. The main improvement is that the prescaler
is computed without a loop that involves two divisions in each step.
This uses the fact, that prescalers[i] = 1 << (2 * i).
Assuming a moderately smart compiler, the needed number of divisions for
the case where the requested period is too big, is reduced from 5 to 2.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The driver used "pwm" for struct tpu_pwm_device pointers. This name is
usually only used for struct pwm_device pointers which this driver calls
"_pwm". So rename to the driver data pointers to "tpd" which then allows
to drop the underscore from "_pwm".
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
As pwm->state might not be updated in tpu_pwm_apply() before calling
tpu_pwm_config(), an additional parameter is needed for tpu_pwm_config()
to not change the implemented logic.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
This simplifies an error path in .probe() and allows to drop the .remove()
function.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The added benefit is that the error code is mentioned in the error message
and its usage is a bit more compact than open coding it. This also
improves behaviour in case devm_clk_get() returns -EPROBE_DEFER.
While touching this code, consistently start error messages with upper
case.
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
The commit 94dbfd6781 ("perf parse-events: Architecture specific
leader override") introduced a feature to reorder the slots event to
fulfill the restriction of the perf metrics topdown group. But the
feature doesn't work on the hybrid machine.
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
<not counted> cpu_core/instructions/
<not counted> cpu_core/slots/
<not supported> cpu_core/topdown-retiring/
1.002871801 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
current perf hard code the PMU name "cpu".
Introduce a new function to check whether the system supports the perf
metrics feature. The result is cached for the future usage.
For X86, the core PMU name always has "cpu" prefix.
With the patch:
$ perf stat -e "{cpu_core/instructions/,cpu_core/slots/,cpu_core/topdown-retiring/}" -a sleep 1
Performance counter stats for 'system wide':
76,337,010 cpu_core/slots/
10,416,809 cpu_core/instructions/
11,692,372 cpu_core/topdown-retiring/
1.002805453 seconds time elapsed
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-5-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The evsel->name may have a different format for a topdown event, a pure
topdown name (e.g., topdown-fe-bound), or a PMU name + a topdown name
(e.g., cpu/topdown-fe-bound/). The cpu/topdown-fe-bound/ kind format
isn't supported by the arch_evlist__leader(). This format is a very
common format for a hybrid platform, which requires specifying the PMU
name for each event.
Without the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
<not counted> instructions
<not counted> slots
<not supported> cpu/topdown-fe-bound/
1.003482041 seconds time elapsed
Some events weren't counted. Try disabling the NMI watchdog:
echo 0 > /proc/sys/kernel/nmi_watchdog
perf stat ...
echo 1 > /proc/sys/kernel/nmi_watchdog
The events in group usually have to be from the same PMU. Try reorganizing the group.
With the patch,
$ perf stat -e '{instructions,slots,cpu/topdown-fe-bound/}' -a sleep 1
Performance counter stats for 'system wide':
157,383,996 slots
25,011,711 instructions
27,441,686 cpu/topdown-fe-bound/
1.003530890 seconds time elapsed
Fixes: bc355822f0 ("perf parse-events: Move slots only with topdown")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-4-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If any member in a group has a different cpu mask than the other
members, the current perf stat disables group. when the perf metrics
topdown events are part of the group, the below <not supported> error
will be triggered.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
141,465,174 slots
<not supported> topdown-retiring
1,605,330,334 uncore_imc_free_running_0/dclk/
The perf metrics topdown events must always be grouped with a slots
event as leader.
Factor out evsel__remove_from_group() to only remove the regular events
from the group.
Remove evsel__must_be_in_group(), since no one use it anymore.
With the patch, the topdown events aren't broken from the group for the
splitting.
$ perf stat -e "{slots,topdown-retiring,uncore_imc_free_running_0/dclk/}" -a sleep 1
WARNING: grouped events cpus do not match, disabling group:
anon group { slots, topdown-retiring, uncore_imc_free_running_0/dclk/ }
Performance counter stats for 'system wide':
346,110,588 slots
124,608,256 topdown-retiring
1,606,869,976 uncore_imc_free_running_0/dclk/
1.003877592 seconds time elapsed
Fixes: a9a1790247 ("perf stat: Ensure group is defined on top of the same cpu mask")
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-3-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The patch ("perf evlist: Keep topdown counters in weak group") fixes the
perf metrics topdown event issue when the topdown events are in a weak
group on a non-hybrid platform. However, it doesn't work for the hybrid
platform.
$./perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
751,765,068 cpu_core/slots/ (84.07%)
<not supported> cpu_core/topdown-bad-spec/
<not supported> cpu_core/topdown-be-bound/
<not supported> cpu_core/topdown-fe-bound/
<not supported> cpu_core/topdown-retiring/
12,398,197 cpu_core/branch-instructions/ (84.07%)
1,054,218 cpu_core/branch-misses/ (84.24%)
539,764,637 cpu_core/bus-cycles/ (84.64%)
14,683 cpu_core/cache-misses/ (84.87%)
7,277,809 cpu_core/cache-references/ (77.30%)
222,299,439 cpu_core/cpu-cycles/ (77.28%)
63,661,714 cpu_core/instructions/ (84.85%)
0 cpu_core/mem-loads/ (77.29%)
12,271,725 cpu_core/mem-stores/ (77.30%)
542,241,102 cpu_core/ref-cycles/ (84.85%)
8,854 cpu_core/cache-misses/ (76.71%)
7,179,013 cpu_core/cache-references/ (76.31%)
1.003245250 seconds time elapsed
A hybrid platform has a different PMU name for the core PMUs, while
the current perf hard code the PMU name "cpu".
The evsel->pmu_name can be used to replace the "cpu" to fix the issue.
For a hybrid platform, the pmu_name must be non-NULL. Because there are
at least two core PMUs. The PMU has to be specified.
For a non-hybrid platform, the pmu_name may be NULL. Because there is
only one core PMU, "cpu". For a NULL pmu_name, we can safely assume that
it is a "cpu" PMU.
In case other PMUs also define the "slots" event, checking the PMU type
as well.
With the patch,
$ perf stat -e '{cpu_core/slots/,cpu_core/topdown-bad-spec/,
cpu_core/topdown-be-bound/,cpu_core/topdown-fe-bound/,
cpu_core/topdown-retiring/,cpu_core/branch-instructions/,
cpu_core/branch-misses/,cpu_core/bus-cycles/,cpu_core/cache-misses/,
cpu_core/cache-references/,cpu_core/cpu-cycles/,cpu_core/instructions/,
cpu_core/mem-loads/,cpu_core/mem-stores/,cpu_core/ref-cycles/,
cpu_core/cache-misses/,cpu_core/cache-references/}:W' -a sleep 1
Performance counter stats for 'system wide':
766,620,266 cpu_core/slots/ (84.06%)
73,172,129 cpu_core/topdown-bad-spec/ # 9.5% bad speculation (84.06%)
193,443,341 cpu_core/topdown-be-bound/ # 25.0% backend bound (84.06%)
403,940,929 cpu_core/topdown-fe-bound/ # 52.3% frontend bound (84.06%)
102,070,237 cpu_core/topdown-retiring/ # 13.2% retiring (84.06%)
12,364,429 cpu_core/branch-instructions/ (84.03%)
1,080,124 cpu_core/branch-misses/ (84.24%)
564,120,383 cpu_core/bus-cycles/ (84.65%)
36,979 cpu_core/cache-misses/ (84.86%)
7,298,094 cpu_core/cache-references/ (77.30%)
227,174,372 cpu_core/cpu-cycles/ (77.31%)
63,886,523 cpu_core/instructions/ (84.87%)
0 cpu_core/mem-loads/ (77.31%)
12,208,782 cpu_core/mem-stores/ (77.31%)
566,409,738 cpu_core/ref-cycles/ (84.87%)
23,118 cpu_core/cache-misses/ (76.71%)
7,212,602 cpu_core/cache-references/ (76.29%)
1.003228667 seconds time elapsed
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Link: https://lore.kernel.org/r/20220518143900.1493980-2-kan.liang@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Flushing system-wide workqueues is dangerous and will be forbidden.
Replace system_wq with local isert_login_wq.
Link: https://lore.kernel.org/r/fbe5e9a8-0110-0c22-b7d6-74d53948d042@I-love.SAKURA.ne.jp
Signed-off-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Kernel doc validator is not happy:
pinctrl-intel.c:865: warning: No description found for return value of 'intel_gpio_to_pin'
pinctrl-intel.c:904: warning: No description found for return value of 'intel_pin_to_gpio'
2 warnings
Add return sections to the kernel documentation of the above mentioned
functions.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: Mika Westerberg <mika.westerberg@linux.intel.com>
To eventually get rid of all legacy drivers convert this driver to the
modern world implementing .apply().
The size check for state->period is moved to .apply() to make sure that
the values of state->duty_cycle and state->period are passed to
pwm_samsung_config without change while they are discarded to int.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Use if and else instead of if(A) and if (!A).
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Signed-off-by: Thierry Reding <thierry.reding@gmail.com>
Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
From the kernel point of view there are only few ops that needs to be exposed:
Hi,
SOF is using dma-trace (or dtrace) as a firmware tracing method, which is only
supported with IPC3 and it is not applicable for IPC4.
Currently the dtrace is 'open managed' regardless of IPC version (we do force
disable it for IPC4, but the dtrace calls remain in place).
From the kernel point of view there are only few ops that needs to be exposed
by the firmware tracing support and everything else is IPC private, should not
be known by the core.
This series converts the current dma-trace as ipc3 specific firmware tracing
sub-component and moves all private data out from generic code.
Regards,
Peter
---
Peter Ujfalusi (8):
ASoC: SOF: Introduce IPC independent ops for firmware tracing support
ASoC: SOF: Rename dtrace_is_supported flag to fw_trace_is_supported
ASoC: SOF: Clone the trace code to ipc3-dtrace as fw_tracing
implementation
ASoC: SOF: Switch to IPC generic firmware tracing
ASoC: SOF: ipc3-dtrace: Move host ops wrappers from generic header to
private
ASoC: SOF: Modify the host trace_init parameter list to include dmab
ASoC: SOF: Introduce opaque storage of private data for firmware
tracing
ASoC: SOF: ipc3-dtrace: Move dtrace related variables local from
sof_dev
sound/soc/sof/Makefile | 1 +
sound/soc/sof/amd/acp-trace.c | 4 +-
sound/soc/sof/amd/acp.h | 2 +-
sound/soc/sof/core.c | 13 +-
sound/soc/sof/debug.c | 2 +-
sound/soc/sof/intel/hda-dsp.c | 2 +-
sound/soc/sof/intel/hda-trace.c | 4 +-
sound/soc/sof/intel/hda.h | 2 +-
sound/soc/sof/ipc.c | 6 +
sound/soc/sof/ipc3-dtrace.c | 649 ++++++++++++++++++++++++++++++++
sound/soc/sof/ipc3-priv.h | 38 ++
sound/soc/sof/ipc3.c | 3 +-
sound/soc/sof/ops.c | 2 +-
sound/soc/sof/ops.h | 26 --
sound/soc/sof/pm.c | 8 +-
sound/soc/sof/sof-priv.h | 53 +--
sound/soc/sof/trace.c | 621 ++----------------------------
17 files changed, 767 insertions(+), 669 deletions(-)
create mode 100644 sound/soc/sof/ipc3-dtrace.c
--
2.36.1
Renamed hte dt binding directory to timestamp according review comment.
Addressed minor comment about having HTE acronym first in the common dt
binding document.
The change reflects above renaming in MAINTAINERS files too.
Signed-off-by: Dipen Patel <dipenp@nvidia.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The "free_name" variable is sometimes used without being initialized.
Fixes: 31ab09b421 ("drivers: Add hardware timestamp engine (HTE) subsystem")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Acked-by: Dipen Patel <dipenp@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Stat events can come from disk and so need a degree of validation. They
contain a CPU which needs looking up via CPU map to access a counter.
Add the CPU to index translation, alongside validity checking.
Discussion thread:
https://lore.kernel.org/linux-perf-users/CAP-5=fWQR=sCuiSMktvUtcbOLidEpUJLCybVF6=BRvORcDOq+g@mail.gmail.com/
Fixes: 7ac0089d13 ("perf evsel: Pass cpu not cpu map index to synthesize")
Reported-by: Michael Petlan <mpetlan@redhat.com>
Suggested-by: Michael Petlan <mpetlan@redhat.com>
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Dave Marchevsky <davemarchevsky@fb.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Lv Ruyi <lv.ruyi@zte.com.cn>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: netdev@vger.kernel.org
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Quentin Monnet <quentin@isovalent.com>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20220519032005.1273691-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
