Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 9-18 bits for power9).
When scheduling events as a group, all events in that group should
match value in threshold bits (like thresh compare, thresh control,
thresh select). Otherwise event open for the sibling events should fail.
But in the current code, incase thresh compare bits are not valid,
we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (873534401e0) and
PM_THRESH_MET (8734340101ec) is expected to fail as both event
request different thresh control bits and invalid thresh compare value.
Result before the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Performance counter stats for 'sleep 1':
11,048 r8735340401e0
1,967 r8734340101ec
1.001354036 seconds time elapsed
0.001421000 seconds user
0.000000000 seconds sys
Result after the patch changes:
[command]# perf stat -e "{r8735340401e0,r8734340101ec}" sleep 1
Error:
The sys_perf_event_open() syscall returned with 22 (Invalid argument)
for event (r8735340401e0).
/bin/dmesg | grep -i perf may provide additional information.
Fixes: 78a16d9fc1 ("powerpc/perf: Avoid FAB_*_MATCH checks for power9")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506061015.43916-2-kjain@linux.ibm.com
Thresh compare bits for a event is used to program thresh compare
field in Monitor Mode Control Register A (MMCRA: 8-18 bits for power10).
When scheduling events as a group, all events in that group should
match value in threshold bits. Otherwise event open for the sibling
events should fail. But in the current code, incase thresh compare bits are
not valid, we are not failing in group_constraint function which can result
in invalid group schduling.
Fix the issue by returning -1 incase event is threshold and threshold
compare value is not valid in group_constraint function.
Patch also fixes the p10_thresh_cmp_val function to return -1,
incase threshold bits are not valid and changes corresponding check in
is_thresh_cmp_valid function to return false only when the thresh_cmp
value is less then 0.
Thresh control bits in the event code is used to program thresh_ctl
field in Monitor Mode Control Register A (MMCRA: 48-55). In below example,
the scheduling of group events PM_MRK_INST_CMPL (3534401e0) and
PM_THRESH_MET (34340101ec) is expected to fail as both event
request different thresh control bits.
Result before the patch changes:
[command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1
Performance counter stats for 'sleep 1':
8,482 r35340401e0
0 r34340101ec
1.001474838 seconds time elapsed
0.001145000 seconds user
0.000000000 seconds sys
Result after the patch changes:
[command]# perf stat -e "{r35340401e0,r34340101ec}" sleep 1
Performance counter stats for 'sleep 1':
<not counted> r35340401e0
<not supported> r34340101ec
1.001499607 seconds time elapsed
0.000204000 seconds user
0.000760000 seconds sys
Fixes: 82d2c16b35 ("powerpc/perf: Adds support for programming of Thresholding in P10")
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Reviewed-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506061015.43916-1-kjain@linux.ibm.com
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘kaslr_get_cmdline’:
arch/powerpc/mm/nohash/kaslr_booke.c:46:2: error: implicit declaration of function ‘early_init_dt_scan_chosen’
early_init_dt_scan_chosen(boot_command_line);
^~~~~~~~~~~~~~~~~~~~~~~~~
arch/powerpc/mm/nohash/kaslr_booke.c: In function ‘get_initrd_range’:
arch/powerpc/mm/nohash/kaslr_booke.c:210:10: error: implicit declaration of function ‘of_read_number’
start = of_read_number(prop, len / 4);
^~~~~~~~~~~~~~
Add missing include files to fix this.
Fixes: 86c38fec69 ("powerpc: Remove asm/prom.h from all files that don't need it")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220517094900.14900-1-yuehaibing@huawei.com
arch/powerpc/mm/nohash/fsl_book3e.c: In function ‘relocate_init’:
arch/powerpc/mm/nohash/fsl_book3e.c:348:2: error: implicit declaration of function ‘early_get_first_memblock_info’
early_get_first_memblock_info(__va(dt_ptr), &size);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Add missing include file linux/of_fdt.h to fix this.
Fixes: 86c38fec69 ("powerpc: Remove asm/prom.h from all files that don't need it")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220517094830.27560-1-yuehaibing@huawei.com
Implement a limited form of KASAN for Book3S 64-bit machines running under
the Radix MMU, supporting only outline mode.
- Enable the compiler instrumentation to check addresses and maintain the
shadow region. (This is the guts of KASAN which we can easily reuse.)
- Require kasan-vmalloc support to handle modules and anything else in
vmalloc space.
- KASAN needs to be able to validate all pointer accesses, but we can't
instrument all kernel addresses - only linear map and vmalloc. On boot,
set up a single page of read-only shadow that marks all iomap and
vmemmap accesses as valid.
- Document KASAN in powerpc docs.
Background
----------
KASAN support on Book3S is a bit tricky to get right:
- It would be good to support inline instrumentation so as to be able to
catch stack issues that cannot be caught with outline mode.
- Inline instrumentation requires a fixed offset.
- Book3S runs code with translations off ("real mode") during boot,
including a lot of generic device-tree parsing code which is used to
determine MMU features.
[ppc64 mm note: The kernel installs a linear mapping at effective
address c000...-c008.... This is a one-to-one mapping with physical
memory from 0000... onward. Because of how memory accesses work on
powerpc 64-bit Book3S, a kernel pointer in the linear map accesses the
same memory both with translations on (accessing as an 'effective
address'), and with translations off (accessing as a 'real
address'). This works in both guests and the hypervisor. For more
details, see s5.7 of Book III of version 3 of the ISA, in particular
the Storage Control Overview, s5.7.3, and s5.7.5 - noting that this
KASAN implementation currently only supports Radix.]
- Some code - most notably a lot of KVM code - also runs with translations
off after boot.
- Therefore any offset has to point to memory that is valid with
translations on or off.
One approach is just to give up on inline instrumentation. This way
boot-time checks can be delayed until after the MMU is set is up, and we
can just not instrument any code that runs with translations off after
booting. Take this approach for now and require outline instrumentation.
Previous attempts allowed inline instrumentation. However, they came with
some unfortunate restrictions: only physically contiguous memory could be
used and it had to be specified at compile time. Maybe we can do better in
the future.
[paulus@ozlabs.org - Rebased onto 5.17. Note that a kernel with
CONFIG_KASAN=y will crash during boot on a machine using HPT
translation because not all the entry points to the generic
KASAN code are protected with a call to kasan_arch_is_ready().]
Originally-by: Balbir Singh <bsingharora@gmail.com> # ppc64 out-of-line radix version
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Update copyright year and comment formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTE69OQwiG7z+Gu@cleo
The kexec code paths involve code that necessarily run in real mode, as
CPUs are disabled and control is transferred to the new kernel. Disable
address sanitization for the kexec code and the functions called in real
mode on CPUs being disabled.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
[mpe: Move pseries_machine_kexec() into kexec.c so setup.c can be instrumented]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFSQ2TUSEaDdVC@cleo
Disable address sanitization for raw and non-maskable interrupt
handlers, because they can run in real mode, where we cannot access
the shadow memory. (Note that kasan_arch_is_ready() doesn't test for
real mode, since it is a static branch for speed, and in any case not
all the entry points to the generic KASAN code are protected by
kasan_arch_is_ready guards.)
The changes to interrupt_nmi_enter/exit_prepare() look larger than
they actually are. The changes are equivalent to adding
!IS_ENABLED(CONFIG_KASAN) to the conditions for calling nmi_enter() or
nmi_exit() in real mode. That is, the code is equivalent to using the
following condition for calling nmi_enter/exit:
if (((!IS_ENABLED(CONFIG_PPC_BOOK3S_64) ||
!firmware_has_feature(FW_FEATURE_LPAR) ||
radix_enabled()) &&
!IS_ENABLED(CONFIG_KASAN) ||
(mfmsr() & MSR_DR))
That unwieldy condition has been split into several statements with
comments, for easier reading.
The nmi_ipi_lock functions that call atomic functions (i.e.,
nmi_ipi_lock_start(), nmi_ipi_lock() and nmi_ipi_unlock()), besides
being marked noinstr, now call arch_atomic_* functions instead of
atomic_* functions because with KASAN enabled, the atomic_* functions
are wrappers which explicitly do address sanitization on their
arguments. Since we are trying to avoid address sanitization, we have
to use the lower-level arch_atomic_* versions.
In hv_nmi_check_nonrecoverable(), the regs_set_unrecoverable() call
has been open-coded so as to avoid having to either trust the inlining
or mark regs_set_unrecoverable() as noinstr.
[paulus@ozlabs.org: combined a few work-in-progress commits of
Daniel's and wrote the commit message.]
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTFGaKM8Pd46PIK@cleo
kasan is already implied by the directory name, we don't need to
repeat it.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTEyoi+xu9brJYe@cleo
KASAN is supported on 32-bit powerpc and the docs should reflect this.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Paul Mackerras <paulus@ozlabs.org>
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/YoTEnMLrnd64j0w5@cleo
In commit f3054ffd71 ("selftests/powerpc: Return skip code for
spectre_v2"), the spectre_v2 selftest is updated to be aware of cases
where the vulnerability status reported in sysfs is incorrect, skipping
the test instead.
This happens because qemu can misrepresent the mitigation status of the
host to the guest. If the count cache is disabled in the host, and this
is correctly reported to the guest, then the guest won't apply
mitigations. If the guest is then migrated to a new host where
mitigations are necessary, it is now vulnerable because it has not
applied mitigations.
Update the selftest to report when we see excessive misses, indicative of
the count cache being disabled. If software flushing is enabled, also
warn that these flushes are just wasting performance.
Signed-off-by: Russell Currey <ruscur@russell.cc>
[mpe: Rebase and update change log appropriately]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210608064809.199116-1-ruscur@russell.cc
The device-tree property no-need-store-drain-on-priv-state-switch is
equivalent to H_CPU_BEHAV_NO_STF_BARRIER from the
H_CPU_GET_CHARACTERISTICS hcall on pseries.
Since commit 84ed26fd00 ("powerpc/security: Add a security feature for
STF barrier") powernv systems with this device-tree property have been
enabling the STF barrier when they have no need for it. This patch
fixes this by clearing the STF barrier feature on those systems.
Fixes: 84ed26fd00 ("powerpc/security: Add a security feature for STF barrier")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404101536.104794-2-ruscur@russell.cc
The device-tree properties no-need-l1d-flush-msr-pr-1-to-0 and
no-need-l1d-flush-kernel-on-user-access are the equivalents of
H_CPU_BEHAV_NO_L1D_FLUSH_ENTRY and H_CPU_BEHAV_NO_L1D_FLUSH_UACCESS
from the H_GET_CPU_CHARACTERISTICS hcall on pseries respectively.
In commit d02fa40d75 ("powerpc/powernv: Remove POWER9 PVR version
check for entry and uaccess flushes") the condition for disabling the
L1D flush on kernel entry and user access was changed from any non-P9
CPU to only checking P7 and P8. Without the appropriate device-tree
checks for newer processors on powernv, these flushes are unnecessarily
enabled on those systems. This patch corrects this.
Fixes: d02fa40d75 ("powerpc/powernv: Remove POWER9 PVR version check for entry and uaccess flushes")
Reported-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Russell Currey <ruscur@russell.cc>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220404101536.104794-1-ruscur@russell.cc
P2020 also contains Power Management Controller and their registers at
offset 0xe0070 compatible with mpc8548. So add PMC node into DTS include
file fsl/p2020si-post.dtsi
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220506203621.26314-1-pali@kernel.org
We added checks to __pa() / __va() to ensure they're only called with
appropriate addresses. But using BUG_ON() is too strong, it means
virt_addr_valid() will BUG when DEBUG_VIRTUAL is enabled.
Instead switch them to warnings, arm64 does the same.
Fixes: 4dd7554a64 ("powerpc/64: Add VIRTUAL_BUG_ON checks for __va and __pa addresses")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220406145802.538416-5-mpe@ellerman.id.au
In the previous commit powerpc added PAGE_SIZE related config symbols
using the generic names.
So there's no need to refer to them in the definition of
PAGE_SIZE_LESS_THAN_64KB etc, the negative dependency on the generic
symbol is sufficient (in this case !PAGE_SIZE_64KB).
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220505125123.2088143-2-mpe@ellerman.id.au
Other arches (sh, mips, hexagon) use standard names for PAGE_SIZE
related config symbols.
Add matching symbols for powerpc, which are enabled by default but
depend on our architecture specific PAGE_SIZE symbols.
This allows generic/driver code to express dependencies on the PAGE_SIZE
without needing to refer to architecture specific config symbols.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20220505125123.2088143-1-mpe@ellerman.id.au
In init_winctx_regs(), __pa() is called on winctx->rx_fifo and this
function is called to initialize registers for receive and fault
windows. But the real address is passed in winctx->rx_fifo for
receive windows and the virtual address for fault windows which
causes errors with DEBUG_VIRTUAL enabled. Fixes this issue by
assigning only real address to rx_fifo in vas_rx_win_attr struct
for both receive and fault windows.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Haren Myneni <haren@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/338e958c7ab8f3b266fa794a1f80f99b9671829e.camel@linux.ibm.com
module_trampoline_target() is quite a hot path used when
activating/deactivating function tracer.
Avoid the heavy copy_from_kernel_nofault() by doing four calls
to copy_inst_from_kernel_nofault().
Use __copy_inst_from_kernel_nofault() for the 3 last calls. First call
is done to copy_from_kernel_nofault() to check address is within
kernel space. No risk to wrap out the top of kernel space because the
last page is never mapped so if address is in last page the first copy
will fails and the other ones will never be performed.
And also make it notrace just like all functions that call it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/c55559103e014b7863161559d340e8e9484eaaa6.1652074503.git.christophe.leroy@csgroup.eu
On the same model as get_user() versus __get_user(),
introduce __copy_inst_from_kernel_nofault() which doesn't
check address.
To be used by callers that have already checked that the adress
is a kernel address.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/1f3702890d6dbd64702b61834753bcc96851c18c.1652074503.git.christophe.leroy@csgroup.eu
In order to debug problems with server potentially
sending us an oplock that we don't recognize (or a race
with close and oplock break) it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_oplock_not_found
Signed-off-by: Steve French <stfrench@microsoft.com>
As filemap_check_errors() only report -EIO or -ENOSPC, we return more nuanced
writeback error -(file->f_mapping->wb_err & MAX_ERRNO).
filemap_write_and_wait
filemap_write_and_wait_range
filemap_check_errors
-ENOSPC or -EIO
filemap_check_wb_err
errseq_check
return -(file->f_mapping->wb_err & MAX_ERRNO)
Signed-off-by: ChenXiaoSong <chenxiaosong2@huawei.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
When trying to debug problems with server sending us a
lease we don't recognize, it would be helpful to have
a dynamic trace point for this case. New tracepoint
is called trace_smb3_lease_not_found
Acked-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Spelling mistake (triple letters) in comment.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Steve French <stfrench@microsoft.com>
This patch move code for FS_IOC_GET_ENCRYPTION_PWSALT case into
ext4's crypto.c file, i.e. ext4_ioctl_get_encryption_pwsalt()
and uuid_is_zero(). This is mostly refactoring logic and should
not affect any functionality change.
Suggested-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/5af98b17152a96b245b4f7d2dfb8607fc93e36aa.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Some of these functions when CONFIG_FS_ENCRYPTION is enabled are not
really inline (let compiler be the best judge of it).
Remove inline and move them into crypto.c where they should be present.
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/b7b9de2c7226298663fb5a0c28909135e2ab220f.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This is to cleanup super.c file which has grown quite large.
So, start moving ext4 crypto related code to where it should
be in the first place i.e. fs/ext4/crypto.c
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Ritesh Harjani <ritesh.list@gmail.com>
Link: https://lore.kernel.org/r/7d637e093cbc34d727397e8d41a53a1b9ca7d7a4.1652595565.git.ritesh.list@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
- Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events in 'perf stat'.
- Fix x86's arch__intr_reg_mask() for the hybrid platform.
- Address 'perf bench numa' compiler error on s390.
- Fix check for btf__load_from_kernel_by_id() in libbpf.
- Fix "all PMU test" 'perf test' to skip hv_24x7/hv_gpci tests on powerpc.
- Fix session topology test to skip the test in guest environment.
- Skip BPF 'perf test' if clang is not present.
- Avoid shell test description infinite loop in 'perf test'.
- Fix Intel LBR callstack entries and nr print message.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQR2GiIUctdOfX2qHhGyPKLppCJ+JwUCYokzYwAKCRCyPKLppCJ+
J9rLAQCwp6FAAbbh/Kxv9jiU51xTYRItpjNk0SDJsh+hb+vwYgD7BTvbTco5d6TJ
n8BkHw2v3iLCUHJX23qzMKgZyOa87w4=
=9T87
-----END PGP SIGNATURE-----
Merge tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
in 'perf stat'.
- Fix x86's arch__intr_reg_mask() for the hybrid platform.
- Address 'perf bench numa' compiler error on s390.
- Fix check for btf__load_from_kernel_by_id() in libbpf.
- Fix "all PMU test" 'perf test' to skip hv_24x7/hv_gpci tests on
powerpc.
- Fix session topology test to skip the test in guest environment.
- Skip BPF 'perf test' if clang is not present.
- Avoid shell test description infinite loop in 'perf test'.
- Fix Intel LBR callstack entries and nr print message.
* tag 'perf-tools-fixes-for-v5.18-2022-05-21' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf session: Fix Intel LBR callstack entries and nr print message
perf test bpf: Skip test if clang is not present
perf test session topology: Fix test to skip the test in guest environment
perf bench numa: Address compiler error on s390
perf test: Avoid shell test description infinite loop
perf regs x86: Fix arch__intr_reg_mask() for the hybrid platform
perf test: Fix "all PMU test" to skip hv_24x7/hv_gpci tests on powerpc
perf stat: Fix and validate CPU map inputs in synthetic PERF_RECORD_STAT events
perf build: Fix check for btf__load_from_kernel_by_id() in libbpf
- fix reset timing of Ilitek touchscreens
- update maintainer entry of DT binding of Mediatek 6779 keypad
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQST2eWILY88ieB2DOtAj56VGEWXnAUCYolIugAKCRBAj56VGEWX
nL6pAQDuLus7t4GLJrg63DS3RXpPII3f1IHMq5lNluqfek9BogEA27Ze2+7pbwMb
iwqrj1UuMTobD2YPbuuxJtiDW2ADOQw=
=e4+T
-----END PGP SIGNATURE-----
Merge tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Pull input fixes from Dmitry Torokhov:
"A small fixup to ili210x touchscreen driver, and updated maintainer
entry for the device tree binding of Mediatek 6779 keypad:
- fix reset timing of Ilitek touchscreens
- update maintainer entry of DT binding of Mediatek 6779 keypad"
* tag 'input-for-v5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: ili210x - use one common reset implementation
Input: ili210x - fix reset timing
dt-bindings: input: mediatek,mt6779-keypad: update maintainer
Two patches both in drivers. The iscsi one is fixing the cpumask
issue you commented on and the ufs one is a late arriving fix for
conditions that can occur in Host Performance Booster reads.
Signed-off-by: James E.J. Bottomley <jejb@linux.ibm.com>
-----BEGIN PGP SIGNATURE-----
iJwEABMIAEQWIQTnYEDbdso9F2cI+arnQslM7pishQUCYojzeCYcamFtZXMuYm90
dG9tbGV5QGhhbnNlbnBhcnRuZXJzaGlwLmNvbQAKCRDnQslM7pishQA4AQCnLKFt
ZBRVnZEGYQrRMAHb63FGUXGW7WWZetItyyx3AgEAhrAEW9JXW+7frYFQHestqfZX
EQAryzurHbRZZhM3fCk=
=hvvM
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Two patches, both in drivers.
The iscsi one is fixing the cpumask issue you commented on and the ufs
one is a late arriving fix for conditions that can occur in Host
Performance Booster reads"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix referencing invalid rsp field
scsi: target: Fix incorrect use of cpumask_t
outstanding credits must be initialized to 0,
because it means the sum of credits consumed by
in-flight requests.
And outstanding credits must be compared with
total credits in smb2_validate_credit_charge(),
because total credits are the sum of credits
granted by ksmbd.
This patch fix the following error,
while frametest with Windows clients:
Limits exceeding the maximum allowable outstanding requests,
given : 128, pending : 8065
Fixes: b589f5db6d ("ksmbd: limits exceeding the maximum allowable outstanding requests")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When there are bursty connection requests,
RDMA connection event handler is deferred and
Negotiation requests are received even if
connection status is NEW.
To handle it, set the status to CONNECTED
if Negotiation requests are received.
Reported-by: Yufan Chen <wiz.chen@gmail.com>
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Tested-by: Yufan Chen <wiz.chen@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Remove some warnings found by running scripts/kernel-doc,
which is caused by using 'make W=1'.
fs/ksmbd/misc.c:30: warning: Function parameter or member 'str' not
described in 'match_pattern'
fs/ksmbd/misc.c:30: warning: Excess function parameter 'string'
description in 'match_pattern'
fs/ksmbd/misc.c:163: warning: Function parameter or member 'share' not
described in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Function parameter or member 'path' not
described in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Excess function parameter 'filename'
description in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:163: warning: Excess function parameter 'sharepath'
description in 'convert_to_nt_pathname'
fs/ksmbd/misc.c:259: warning: Function parameter or member 'share' not
described in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Function parameter or member 'name' not
described in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Excess function parameter 'path'
description in 'convert_to_unix_name'
fs/ksmbd/misc.c:259: warning: Excess function parameter 'tid'
description in 'convert_to_unix_name'
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
smb-direct max read/write size can be different with smb2 max read/write
size. So smb2_read() can return error by wrong max read/write size check.
This patch use smb_direct_max_read_write_size for this check in
smb-direct read/write().
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Add 'smbd max io size' parameter to adjust smbd-direct max read/write
size.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
We found the issue that ksmbd return STATUS_NO_MORE_FILES response
even though there are still dentries that needs to be read while
file read/write test using framtest utils.
windows client send smb2 query dir request included
OutputBufferLength(128) that is too small to contain even one entry.
This patch make ksmbd immediately returns OutputBufferLength of response
as zero to client.
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Reviewed-by: Hyunchul Lee <hyc.lee@gmail.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make ksmbd handle multiple buffer descriptors
when reading and writing files using SMB direct:
Post the work requests of rdma_rw_ctx for
RDMA read/write in smb_direct_rdma_xmit(), and
the work request for the READ/WRITE response
with a remote invalidation in smb_direct_writev().
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Make get_sg_list return EINVAL if there aren't
mapped scatterlists.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Because we don't have to tracking pending packets
by dividing these into packets with payload and
packets without payload, merge the tracking code.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
SMB2_READ/SMB2_WRITE request has to be granted the number
of rw credits, the pages the request wants to transfer
/ the maximum pages which can be registered with one
MR to read and write a file.
And allocate enough RDMA resources for the maximum
number of rw credits allowed by ksmbd.
Signed-off-by: Hyunchul Lee <hyc.lee@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
