1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
-----BEGIN PGP SIGNATURE-----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=1MC3
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM64 changes for v5.9
1. Enable UFS (Universal Flash Storage) on Exynos7 Espresso board.
2. Fix silent hang after boot off Exynos7 Espresso board.
3. Minor DTS fixes and adjustments with dtschema.
* tag 'samsung-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: Add unit address to soc node and move thermal zones on Exynos7
arm64: dts: exynos: Add unit address to soc node on Exynos5433
arm64: dts: exynos: Remove DMA controller bus node name to fix dtschema warnings
arm64: dts: exynos: Keep LDO12 always-on on Espresso
arm64: dts: exynos: Fix silent hang after boot on Espresso
arm64: dts: exynos: Remove generic arm,armv8-pmuv3 compatible
arm64: dts: exynos: Describe PWM interrupts on Exynos7
arm64: dts: exynos: Add UFS node to Exynos7
Link: https://lore.kernel.org/r/20200721180900.13844-3-krzk@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
-----BEGIN PGP SIGNATURE-----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=i4yf
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.9
For SM8250 this adds the main pinctrl/gpio block (TLMM), I2C and SPI
controllers, the CPU subsytem watchdog, inter-processor signalling
controller (IPCC), always-on power/clock controller (AOSS),
inter-processor state machine (SMP2P), defines remoteproc controls
for audio, compute and sensor processors and base definition for the
PM8009 PMIC. It also does fix up a few minor issues from the initial
merge of the platform support.
SC7180 and SDM845 gains interconnect paths and performance tables
defined for display, QUP, QSPI, SDHC and CPUs.
SC7180 gains WiFi support and some cleanups related to the modem
remoteproc.
SDM845 gains inline crypto engine support for UFS, LAB/IBB
regulators for powering display panels, remoteproc relocation debug
support
SM8150 gains USB controller support and the two related PHYs, as well as
thermal zones and throttling support.
IPQ8074 gains USB and SDHCI support.
MSM8916 is being cleaned up, gains interconnect providers and Samsung
A2015 gains accelerometer and magnetometer support.
MSM8994 gains PSCI, SDHCI, SPMI support, I2C, SPI, UART gains DMA
support and the DTS files are cleaned up.
The SDM630 platform DTS is at last merged and initial support for Sony
Xperia 10, 10 Plus, XA2, XA2 Plus and XA2 Ultra is added.
* tag 'qcom-arm64-for-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (66 commits)
arm64: dts: qcom: pmi8998: Add nodes for LAB and IBB regulators
arm64: dts: sc7180: Add DSI and MDP OPP tables and power-domains
arm64: dts: sdm845: Add DSI and MDP OPP tables and power-domains
arm64: dts: qcom: sc7180: Move the fixed-perm property to SoC dtsi
arm64: dts: qcom: msm8916-samsung-a2015: Add accelerometer/magnetometer
arm64: dts: qcom: msm8916: Use higher I2C drive-strength only on DB410c
arm64: dts: qcom: msm8916: Simplify pinctrl configuration
arm64: dts: msm8916-samsung/longcheer: Move pinctrl/regulators to end of file
arm64: dts: qcom: sm8250: Drop tcsr_mutex syscon
arm64: dts: qcom: sc7180: Add missing properties for Wifi node
arm64: dts: qcom: Fix WiFi supplies on sc7180-idp
arm64: dts: sdm845: add Inline Crypto Engine registers and clock
arm64: dts: sc7180: Add sdhc opps and power-domains
arm64: dts: sdm845: Add sdhc opps and power-domains
arm64: dts: sc7180: Add OPP table for all qup devices
arm64: dts: sdm845: Add OPP table for all qup devices
arm64: dts: sc7180: Add qspi opps and power-domains
arm64: dts: sdm845: Add qspi opps and power-domains
arm64: dts: qcom: sdm845: Add cpu OPP tables
arm64: dts: qcom: sc7180: Drop the unused non-MSA SID
...
Link: https://lore.kernel.org/r/20200721044934.3430084-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=GARv
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi into arm/dt
ARM64: DT: Hisilicon SoCs DT updates for 5.9
- Refactor hi6220-hikey dts to use phandles for overriding nodes
- Align UART node name to fix dtschema validator warnings for hi6220
- Add basic usb gadget support on hikey960
- Update adv7533 nodes to meet with the binding for hikey and hikey960
* tag 'hisi-arm64-dt-for-5.9' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisilicon: hikey: fixes to comply with adi, adv7533 DT binding
dts: hi3660: Add support for basic usb gadget on Hikey960
arm64: dts: hisilicon: Align UART nodename with dtschema
arm64: dts: hisilicon: Use phandles for overriding nodes in hi6220
Link: https://lore.kernel.org/r/5F165E8E.3030503@hisilicon.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlZAAKCRDj7w1vZxhR
xft/AQCaR2CkyOVyK32yPUX0ZF2nS+LYzalJIUpOuLhy37GQVwEA+vlQTa7fKdtW
4IX58peBkRD8FwTszrwR/tImDPd8Rwg=
=z8pA
-----END PGP SIGNATURE-----
Merge tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/dt
Our usual number of patches to improve the Allwinner Device Tree
support, including:
- CPUFreq / Thermal throttling support for the H5
- Touchscreen support for the Pinephone
- New boards: PinePhone v1.2
* tag 'sunxi-dt-for-5.9-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h5: bananapi-m2-plus-v1.2: Tie in CPU OPPs
arm64: dts: allwinner: h5: libretech-all-h3-cc: Tie in CPU OPPs
arm64: dts: allwinner: h5: Add CPU Operating Performance Points table
arm64: dts: allwinner: h5: Add trip and cooling maps to CPU thermal zones
arm64: dts: allwinner: h5: Add clock to CPU cores
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Fix CPU supply voltages
ARM: dts: sunxi: bananapi-m2-plus-v1.2: Add regulator supply to all CPU cores
ARM: dts: sunxi: libretech-all-h3-cc: Add regulator supply to all CPU cores
arm64: dts: sun50i-pinephone: dldo4 must not be >= 1.8V
arm64: dts: allwinner: Add support for PinePhone revision 1.2
dt-bindings: arm: sunxi: Add PinePhone 1.2 bindings
arm64: dts: sun50i-a64-pinephone: Add touchscreen support
arm64: dts: sun50i-a64-pinephone: Enable LCD support on PinePhone
ARM: dts: orange-pi-zero-plus2: add leds configuration
ARM: dts: orange-pi-zero-plus2: enable USB OTG port
Link: https://lore.kernel.org/r/fa48ffcb-3404-41bb-b065-a16717cf5688.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VVUkUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM4J8wf+JD5crdfw+/458BsgX30HBfgd++CG
RRJxeqx3CkHsPyMAza9wKWPZDASIDQaWIA3CKf2niQyR7jKxAd9JdMw+hBBMoG+I
4+uMRictK98rODP4bcGlLtUjdoncjCuAoa58tKSAiZ+SAEjlb5UHCXpbKtrPtQuY
r4v+ODV82U1gIdDaZeOS1L40iQHwGO5/Aq+Ua8UvraoMTgHMW6Il86XlbE3Gk1Ql
YrqAteG9SJm5cFRbrmmKisA3rLZoYqYYZ1Tb66kDKBrmTTzZTBmHE+5SE7DJwFh5
c74BHkARhw0lXhpQzcEK9jnR88+ZUqL+qbteVmotB4+54WbFrJEJ4/BejA==
=sjzz
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/dt
i.MX arm64 device tree update for 5.9:
- Update i.MX8M OCOTP device node name to match .yaml schema.
- Add ftm_alarm0 device support for layerscape SoCs.
- Add DSPI controller support for lx2160a device.
- A series from Peng Fan to add aliases for various devices on i.MX8
SoCs.
- Add Hantro G1/G2 VPU device support for imx8mq.
- Add more thermal zone support for ls1028a, ls1043a and ls1046a.
- Other small random changes.
* tag 'imx-dt64-5.9' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (26 commits)
arm64: dts: lx2160a-rdb: fix shunt-resistor value
arm64: dts: ls1028a-qds: Add DSPI flash nodes
arm64: dts: lx2160a: Increase configuration space size
arm64: dts: zii-ultra: update MDIO speed and preamble
arm64: dts: ls1043a: update USB nodes status to match board config
arm64: dts: imx8mn-evk: add pca9450 for i.mx8mn-evk board
arm64: dts: imx8mp: add ddr pmu device node
arm64: dts: ls1043a: add more thermal zone support
arm64: dts: ls1046a: add more thermal zone support
arm64: dts: layerscape: add ftm_alarm0 node
arm64: dts: ls1028a: Add ftm_alarm0 DT node
arm64: dts: lx2160a: add ftm_alarm0 DT node
arm64: dts: lx2160a: add DT node for all DSPI controller
arm64: dts: lx2160a: add dspi controller DT nodes
arm64: dts: imx8mp: Add fallback compatible to ocotp node
arm64: dts: imx8qxp: Add ethernet alias
arm64: dts: imx8qxp: add i2c aliases
arm64: dts: imx8qxp: add alias for lsio MU
arm64: dts: imx8m: add mu node
arm64: dts: imx8m: change ocotp node name on i.MX8M SoCs
...
Link: https://lore.kernel.org/r/20200720085536.24138-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
were failing on older SoCs and one to fix Cedrus on the H6.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlyQAKCRDj7w1vZxhR
xcNtAQDO2rSFHGpQsUE/MCRxMqd2c2OQ9zpovRnirnyJqLCPEwD/b8GAi9tfJksM
lmghSQnByq6Sqm9UA/i6jjLfz//4iQg=
=JoYD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that
were failing on older SoCs and one to fix Cedrus on the H6.
* tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch adds support to enable HDMI out for
N10 and N8 combinations SBCs.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200720110230.367985-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Radxa dalang carrier board has 2x USB 2.0 and 1x USB 3.0
ports.
This patch adds support to enable all these USB ports for
N10 and N8 combinations SBCs.
Note that the USB 3.0 port on RockPI N8 combination works
as USB 2.0 OTG since it is driven from RK3288.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200720110230.367985-1-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Adding maximum speed property for DWC3 USB node which can be used
for setting interconnect bandwidth.
Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1595317489-18432-3-git-send-email-sanm@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add "arm,coresight-loses-context-with-cpu" property to coresight
ETM nodes to avoid failure of trace session because of losing
context on entering deep idle states.
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Sai Prakash Ranjan <saiprakash.ranjan@codeaurora.org>
Link: https://lore.kernel.org/r/20200721071343.2898-1-saiprakash.ranjan@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the OPP table for the Mali Bifrost GPU and drop the hardcoded
initial clock configuration. This enables GPU DVFS and thus saves power
when the GPU is not in use while still being able switch to a higher
clock on demand.
Set the GP0_PLL clock to 744MHz (which is the only frequency which
cannot be derived from the FCLK dividers) as the clock driver avoids
setting the parent clock rates so the HIFI PLL clock isn't changed (as
that's reserved for audio).
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200719173213.639540-4-martin.blumenstingl@googlemail.com
Add the OPP table for the Mali-T820 GPU and drop the hardcoded initial
clock configuration. This enables GPU DVFS and thus saves power when the
GPU is not in use while still being able switch to a higher clock on
demand.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200719173213.639540-3-martin.blumenstingl@googlemail.com
Add the OPP table for the Mali-450 GPU and drop the hardcoded initial
clock configuration. This enables GPU DVFS and thus saves power when the
GPU is not in use while still being able switch to a higher clock on
demand.
Set the GP0_PLL clock to 744MHz (which is the only frequency which
cannot be derived from the FCLK dividers) as the clock driver avoids
setting the parent clock rates so the MPLL clocks aren't changed (as
these are reserved for audio). The only exception to this is the GXL
S805X package because the 744MHz OPP isn't working correctly there.
While here, make most of meson-gxl-mali re-usable to reduce the amount
of duplicate code between GXBB and GXL. This is more important now as we
don't want to duplicate the GPU OPP table.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Link: https://lore.kernel.org/r/20200719173213.639540-2-martin.blumenstingl@googlemail.com
The WeTek Core2 is a commercial device based on the Amlogic Q200 reference
design but with the following differences:
- 3GB RAM, 32GB eMMC
- Blue and Red LEDs used to signal on/off status
- uart_AO can be accessed after opening the case; soldering required
- USB OTG is not accessible (inside the case)
- Realtek RTL8152 Ethernet (internal USB connection)
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Reviewed-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200719021421.7959-3-christianshewitt@gmail.com
Add initial audio support limited to HDMI i2s, copying the config
from the existing VIM3 device-tree.
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20200718072532.8427-3-christianshewitt@gmail.com
The VIM3/VIM3L Boards use w25q128 not w25q32 - this is a cosmetic change
only - the device probes fine with the current device-tree.
Fixes: 0e1610e726 ("arm64: dts: khadas-vim3: add SPIFC controller node")
Signed-off-by: Christian Hewitt <christianshewitt@gmail.com>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Neil Armstrong <narmstrong@baylibre.com>
Link: https://lore.kernel.org/r/20200718054505.4165-1-christianshewitt@gmail.com
The Bananapi M2 Plus H5 v1.2 can work with the standard H5 OPPs.
Tie them in to enable CPU frequency scaling.
The original Bananapi M2 Plus H5 is left out for now, as adding
the fixed regulator along with the enable pin seemed to cause some
glitching in Linux.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-9-wens@kernel.org
The Libre Computer ALL-H3-CC H5 variant can work with the standard H5
OPPs. Tie them in to enable CPU frequency scaling.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-8-wens@kernel.org
Add an OPP (Operating Performance Points) table for the CPU cores for
boards to include to DVFS (Dynamic Voltage & Frequency Scaling) on the
H5. The table originates from Armbian, but the maximum voltage is raised
slightly to account for boards using slightly higher voltages.
The table and tie in to the CPU cores are put in a separate dtsi file
that board files can include to opt in. Or they can define their own
tables if the standard one does not fit.
This has been tested on the Libre Computer ALL-H3-CC-H5 and the Bananapi
M2+ v1.2 H5, both with adequate cooling. The former has a fixed 1.2V
regulator, while the latter has a GPIO controlled regulator switchable
between 1.1V and 1.3V.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-7-wens@kernel.org
This enables passive cooling by down-regulating CPU voltage and frequency.
The trip points were copied from the H3.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-6-wens@kernel.org
The ARM CPU cores are fed by the CPU clock from the CCU. Add a
reference to the clock for each CPU core, along with the clock
transition latency.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://lore.kernel.org/r/20200717160053.31191-5-wens@kernel.org
Fix value of shunt-resistor property.
The LX2160A-RDB has 500 uOhm shunt for
the INA220, not 1000 uOhm. Unless
it will get wrong power consumption(1/2)
Signed-off-by: Biwen Li <biwen.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The commit below caused a regression for clearfog-gt-8k, where the link
between the switch and the host does not come up.
Investigation revealed two issues:
- MV88E6xxx DSA no longer allows an in-band link to come up as the link
is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix
in-band AN link establishment" addresses this.
- The dts configured dissimilar link modes at each end of the host to
switch link; the host was configured using a fixed link (so has no
in-band status) and the switch was configured to expect in-band
status.
With both issues fixed, the regression is resolved.
Fixes: 34b5e6a33c ("net: dsa: mv88e6xxx: Configure MAC when using fixed link")
Reported-by: Martin Rowe <martin.p.rowe@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add IOMMU node for Marvell AP806 based SoCs together with platform
and PCI device Stream ID mapping.
Signed-off-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Tomasz Nowicki <tn@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Some of gmac, sdmmc node properties are common across rk3288 and
rk3399pro SOM's so move them into Carrier dtsi.
Chosen node is specific to rk3399pro configure SBC, so move it into
RockPI N10 dts.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-5-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Supply regulators are common across different variants of vmarc SOM's
since the Type C power controller IC is part of the carrier board.
So, move the supply regulators into carrier board dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-4-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
I2C nodes and associated slave devices defined in Carrier board
are specific to rk3399pro vmrac SOM.
So, move them into SOM dtsi.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Link: https://lore.kernel.org/r/20200715083418.112003-2-jagan@amarulasolutions.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
'bus-width' has been added to px30.dtsi mmc nodes, so now it can be
removed from the dts files that include it.
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200715070954.1992-1-jbx6244@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1594292674-15632-5-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Add the OPP tables for DSI and MDP based on the perf state/clk
requirements, and add the power-domains property to specify the
scalable power domain.
Tested-by: Rob Clark <robdclark@gmail.com>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Link: https://lore.kernel.org/r/1594292674-15632-4-git-send-email-rnayak@codeaurora.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
This contains a slew of fixes in preparation for validating device trees
against json-schema bindings. In addition, this enables the CPU complex
(for CPU frequency scaling) and GPU on Tegra194.
-----BEGIN PGP SIGNATURE-----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=iRoV
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.9-rc1
This contains a slew of fixes in preparation for validating device trees
against json-schema bindings. In addition, this enables the CPU complex
(for CPU frequency scaling) and GPU on Tegra194.
* tag 'tegra-for-5.9-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (56 commits)
arm64: tegra: Add the GPU on Tegra194
arm64: tegra: Add compatible string for Tegra194 CPU complex
arm64: tegra: Add HDMI supplies on Norrin
arm64: tegra: Add #{address,size}-cells for VI I2C on Tegra210
arm64: tegra: Add missing clocks and power-domains to Tegra210 VI I2C
arm64: tegra: Add clocks and resets for ISP on Tegra210
arm64: tegra: Fix compatible string for DPAUX on Tegra210
arm64: tegra: Add i2c-bus subnode for DPAUX controllers
arm64: tegra: Sort aliases alphabetically
arm64: tegra: Remove spurious tabs
arm64: tegra: Populate VBUS for USB3 on Jetson TX2
arm64: tegra: Enable DFLL support on Jetson Nano
arm64: tegra: Add support for Jetson Xavier NX
arm64: tegra: Re-order PCIe aperture mappings
arm64: tegra: Enable Tegra VI CSI support for Jetson Nano
arm64: tegra: jetson-tx1: Add camera supplies
arm64: tegra: Fix order of XUSB controller clocks
arm64: tegra: Rename cbb@0 to bus@0 on Tegra194
arm64: tegra: Sort nodes by unit-address on Jetson Nano
arm64: tegra: Various fixes for PMICs
...
Link: https://lore.kernel.org/r/20200717161300.1661002-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add initial device tree for Keem Bay EVM board. With this minimal device
tree the board boots fine using an initramfs image.
Link: https://lore.kernel.org/r/20200717090414.313530-6-daniele.alessandrelli@linux.intel.com
Reviewed-by: Dinh Nguyen <dinguyen@kernel.org>
Signed-off-by: Daniele Alessandrelli <daniele.alessandrelli@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The GPU found on NVIDIA Tegra194 SoCs is a Volta generation GPU called
GV11B.
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
