Previously, pg_to_raw_osds() didn't filter for existent OSDs because
raw_to_up_osds() would filter for "up" ("up" is predicated on "exists")
and raw_to_up_osds() was called directly after pg_to_raw_osds(). Now,
with apply_upmap() call in there, nonexistent OSDs in pg_to_raw_osds()
output can affect apply_upmap(). Introduce remove_nonexistent_osds()
to deal with that.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Move raw_pg_to_pg() call out of get_temp_osds() and into
ceph_pg_to_up_acting_osds(), for upcoming apply_upmap().
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
pg_temp and pg_upmap encodings are the same (PG -> array of osds),
except for the incremental remove: it's an empty mapping in new_pg_temp
for pg_temp and a separate old_pg_upmap set for pg_upmap. (This isn't
to allow for empty pg_upmap mappings -- apparently, pg_temp just wasn't
looked at as an example for pg_upmap encoding.)
Reuse __decode_pg_temp() for decoding pg_upmap and new_pg_upmap.
__decode_pg_temp() stores into pg_temp union member, but since pg_upmap
union member is identical, reading through pg_upmap later is OK.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Some of these won't be as efficient as they could be (e.g.
ceph_decode_skip_set(... 32 ...) could advance by len * sizeof(u32)
once instead of advancing by sizeof(u32) len times), but that's fine
and not worth a bunch of extra macro code.
Replace skip_name_map() with ceph_decode_skip_map as an example.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Make __{lookup,remove}_pg_mapping() look like their ceph_spg_mapping
counterparts: take const struct ceph_pg *.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Initially for ceph_pg_mapping, ceph_spg_mapping and ceph_hobject_id,
compared with ceph_pg_compare(), ceph_spg_compare() and hoid_compare()
respectively.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
For luminous and beyond we are encoding the actual spgid, which
requires operating with the correct pg_num, i.e. that of the target
pool.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
need_check_tiering logic doesn't make a whole lot of sense. Drop it
and apply tiering unconditionally on every calc_target() call instead.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Otherwise we may miss events like PG splits, pool deletions, etc when
we get multiple incremental maps at once. Because check_pool_dne() can
now be fed an unlinked request, finish_request() needed to be taught to
handle unlinked requests.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
When processing a map update consisting of multiple incrementals, we
may end up running check_linger_pool_dne() on a lingering request that
was previously added to need_resend_linger list. If it is concluded
that the target pool doesn't exist, the request is killed off while
still on need_resend_linger list, which leads to a crash on a NULL
lreq->osd in kick_requests():
libceph: linger_id 18446462598732840961 pool does not exist
BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
IP: ceph_osdc_handle_map+0x4ae/0x870
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Replace it with more fine-grained bools to separate updating
ceph_osd_request_target fields and the decision to resend.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Give upper layers a chance to reencode the message after the connection
is negotiated and ->peer_features is set. OSD client will use this to
support both luminous and pre-luminous OSDs (in a single cluster): the
former need MOSDOp v8; the latter will continue to be sent MOSDOp v4.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The old (v15) pi->last_force_request_resend has been repurposed to
make pre-RESEND_ON_SPLIT clients that don't check for PG splits but do
obey pi->last_force_request_resend resend on splits. See ceph.git
commit 189ca7ec6420 ("mon/OSDMonitor: make pre-luminous clients resend
ops on split").
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The code has been in place since commit 63244fa123 ("libceph:
introduce ceph_osd_request_target, calc_target()"), and, with the
ceph_{oloc,oid}_copy() issue fixed in the previous commit, is now
in working order.
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Current code does not update ceph_dentry_info::lease_session once
it is set. If auth mds of corresponding dentry changes, dentry lease
keeps in an invalid state.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Reviewed-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Current ceph uses FSID as primary index key of fscache data. This
allows ceph to retain cached data across remount. But this causes
problem (kernel opps, fscache does not support sharing data) when
a filesystem get mounted several times (with fscache enabled, with
different mount options).
The fix is adding a new mount option, which specifies uniquifier
for fscache.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
extra_mon_dispatch() and debugfs' foo_show functions dereference
fsc->mdsc. we should clean up fsc->client->extra_mon_dispatch
and debugfs before destroying fsc->mds.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Previously we were returning values for quota, layout
xattrs without any kind of update -- the user just got
whatever happened to be in our cache.
Clearly this extra round trip has a cost, but reads of
these xattrs are fairly rare, happening on admin
intervention rather than in normal operation.
Link: http://tracker.ceph.com/issues/17939
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Don't re-send interrupted flock request in cases of mds failover
and receiving request forward. Because corresponding 'lock intr'
request may have been finished, it won't get re-sent.
Link: http://tracker.ceph.com/issues/20170
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Ceph needs to flush dirty page in the order in which in which snap
context they belong to. Dirty pages belong to older snap context
should be flushed earlier. if writepage_nounlock() can not flush a
page, it should redirty the page.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The old 'approaching max_size' code expects MDS set max_size to
'2 * reported_size'. This is no longer true. The new code reports
file size when half of previous max_size increment has been used.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The 'wanted max size' could be sent to inode's old auth mds, re-send
it to inode's new auth mds if necessary. Otherwise write syscall may
hang.
Signed-off-by: "Yan, Zheng" <zyan@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
The late 2009, 27 inch Apple iMac10,1 has an
internal eDP display and an external Mini-
Displayport output, driven by a DCE-3.2, RV730
Radeon Mobility HD-4670.
The machine worked fine in a dual-display setup
with eDP panel + externally connected HDMI
or DVI-D digital display sink, connected via
MiniDP to DVI or HDMI adapter.
However, booting the machine single-display with
only eDP panel results in a completely black
display - even backlight powering off, as soon as
the radeon modesetting driver loads.
This patch fixes the single dispay eDP case by
assigning encoders based on dig->linkb, similar
to DCE-4+. While this should not be generally
necessary (Alex: "...atom on normal boards
should be able to handle any mapping."), Apple
seems to use some special routing here.
One remaining problem not solved by this patch
is that an external Minidisplayport->DP sink
does still not work on iMac10,1, whereas external
DVI and HDMI sinks continue to work.
The problem affects at least all tested kernels
since Linux 3.13 - didn't test earlier kernels, so
backporting to stable probably makes sense.
v2: With the original patch from 2016, Alex was worried it
will break other DCE3.2 systems. Use dmi_match() to
apply this special encoder assignment only for the
Apple iMac 10,1 from late 2009.
Signed-off-by: Mario Kleiner <mario.kleiner.de@gmail.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
we access the memslots array via srcu. Mark it as such and
use the right access functions also for the freeing of
memory slots.
Found by sparse:
./include/linux/kvm_host.h:565:16: error: incompatible types in
comparison expression (different address spaces)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
mark kvm->busses as rcu protected and use the correct access
function everywhere.
found by sparse
virt/kvm/kvm_main.c:3490:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3509:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3561:15: error: incompatible types in comparison expression (different address spaces)
virt/kvm/kvm_main.c:3644:15: error: incompatible types in comparison expression (different address spaces)
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
irq routing is rcu protected. Use the proper access functions.
Found by sparse
virt/kvm/irqchip.c:233:13: warning: incorrect type in assignment (different address spaces)
virt/kvm/irqchip.c:233:13: expected struct kvm_irq_routing_table *old
virt/kvm/irqchip.c:233:13: got struct kvm_irq_routing_table [noderef] <asn:4>*irq_routing
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
In recent patches where we record comm and tgid at the same time, we skip
continuing to record if any fail. Fix that by trying to record as many things
as we can even if some couldn't be recorded. If any information isn't recorded,
then we don't set trace_taskinfo_save as before.
Link: http://lkml.kernel.org/r/20170706230023.17942-3-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently we stop recording tgid for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
tgid for idle task as a success.
Link: http://lkml.kernel.org/r/20170706230023.17942-2-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Currently we stop recording comm for non-idle tasks when switching from/to idle
task since we treat that as a record failure. Fix that by treat recording of
comm for idle task as a success.
Link: http://lkml.kernel.org/r/20170706230023.17942-1-joelaf@google.com
Cc: kernel-team@android.com
Cc: Ingo Molnar <mingo@redhat.com>
Reported-by: Michael Sartain <mikesart@gmail.com>
Signed-off-by: Joel Fernandes <joelaf@google.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Check return value from call to platform_get_irq(),
so in case of failure print error message and propagate
the return value.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Acked-by: Nicolin Chen <nicoleotsuka@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Instead of adding a binary sysfs attribute from the driver (which suffers
from a race condition as the attribute appears after the device), use the
core to register an nvmem device.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
This removes a possible race condition and crash and allows for further
improvement of the driver.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
