The Huskyboard never made it to production, and its successor the
Celloboard was only shipped in very limited quantities with ACPI
only firmware, so the historical significance of husky.dts is
highly questionable. Let's drop it.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Hi Linus,
Please, pull the following treewide patch that replaces zero-length arrays with
flexible-array members. This patch has been baking in linux-next for a
whole development cycle.
Thanks
--
Gustavo
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEkmRahXBSurMIg1YvRwW0y0cG2zEFAmI6GIUACgkQRwW0y0cG
2zFLWw/+OB1gZeQD3boKpUMntWnn6wjhUxdrO8CYkpzG+B+8TFECXNjy8HV1CSiw
GKKRndYELOyYaD5o/F2vtPe10iPHbrdIlMFRPBRoht0/cvSZgzHlfT8EjWQwerYY
dieztUFKjeSj0MXivdNDnKOTm8o9cz8KmCrWFP+My37Fasn/9+nBX8iNVIvAX4xy
T+IVmjtDifQUsTs298UGnBvDeuZOiGHhXXU5rq6lIX0Rl554OsWZW94d6jUPj/h7
t1v6jdojNuyaMKn45/xnPj9VvmDiSu3K67m3fjRdzLPDOhISjr2fw4KEUOKdsebh
yJ9t5u8IufyPbm9kyI+rZt+T8ZlV2/qt2+mt6QgtDMnWrs+4nU15JY0SHImMSBZQ
rBEZcQlrIcGJ+CsNB8Y7jIGYO0SSkhodAvfl0LRA0AbTqLGqq0OkAQS5D52r3H2r
uz6xdYb7kG43XaRyaAIPqhZsp/jk2NrXvEvin2tSaXZFR1cxp+oxcV2UajmnOU6i
EIBS4PzJnYx2RZRa+h8YbBa/+D4N6+fj/tjmwBawiUBPjjaLAsGFNwUHqvBoD05S
bk6oXi654NBwVjsknZ0grVz0TtSvdZ3uJL5FZApTOHITqH8vlxlNefmHri4vZRZO
NN7NIQ0yaUCnorzMg+vP8ZtflhQwrMJbjwIS9YD0RHd7MBhYX8k=
=xZD2
-----END PGP SIGNATURE-----
Merge tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull flexible-array transformations from Gustavo Silva:
"Treewide patch that replaces zero-length arrays with flexible-array
members.
This has been baking in linux-next for a whole development cycle"
* tag 'flexible-array-transformations-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
treewide: Replace zero-length arrays with flexible-array members
The tasklist_lock popped up as a scalability bottleneck on some testing
workloads. The readlocks in do_prlimit and set/getpriority are not
necessary in all cases.
Based on a cycles profile, it looked like ~87% of the time was spent in
the kernel, ~42% of which was just trying to get *some* spinlock
(queued_spin_lock_slowpath, not necessarily the tasklist_lock).
The big offenders (with rough percentages in cycles of the overall trace):
- do_wait 11%
- setpriority 8% (this patchset)
- kill 8%
- do_exit 5%
- clone 3%
- prlimit64 2% (this patchset)
- getrlimit 1% (this patchset)
I can't easily test this patchset on the original workload for various
reasons. Instead, I used the microbenchmark below to at least verify
there was some improvement. This patchset had a 28% speedup (12% from
baseline to set/getprio, then another 14% for prlimit).
One interesting thing is that my libc's getrlimit() was calling
prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64
had no effect - it essentially optimized the older syscalls only. I
didn't do that in this patchset, but figured I'd mention it since it was
an option from the previous patch's discussion.
v3: https://lkml.kernel.org/r/20220106172041.522167-1-brho@google.com
v2: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/
- update_rlimit_cpu on the group_leader instead of for_each_thread.
- update_rlimit_cpu still returns 0 or -ESRCH, even though we don't care
about the error here. it felt safer that way in case someone uses
that function again.
v1: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/
int main(int argc, char **argv)
{
pid_t child;
struct rlimit rlim[1];
fork(); fork(); fork(); fork(); fork(); fork();
for (int i = 0; i < 5000; i++) {
child = fork();
if (child < 0)
exit(1);
if (child > 0) {
usleep(1000);
kill(child, SIGTERM);
waitpid(child, NULL, 0);
} else {
for (;;) {
setpriority(PRIO_PROCESS, 0,
getpriority(PRIO_PROCESS, 0));
getrlimit(RLIMIT_CPU, rlim);
}
}
}
return 0;
}
Barret Rhoden (3):
setpriority: only grab the tasklist_lock for PRIO_PGRP
prlimit: make do_prlimit() static
prlimit: do not grab the tasklist_lock
include/linux/posix-timers.h | 2 +-
include/linux/resource.h | 2 -
kernel/sys.c | 127 +++++++++++++++++----------------
kernel/time/posix-cpu-timers.c | 12 +++-
4 files changed, 76 insertions(+), 67 deletions(-)
I have dropped the first change in this series as an almost identical
change was merged as commit 7f8ca0edfe ("kernel/sys.c: only take
tasklist_lock for get/setpriority(PRIO_PGRP)").
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
-----BEGIN PGP SIGNATURE-----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=VVGP
-----END PGP SIGNATURE-----
Merge tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace
Pull tasklist_lock optimizations from Eric Biederman:
"prlimit and getpriority tasklist_lock optimizations
The tasklist_lock popped up as a scalability bottleneck on some
testing workloads. The readlocks in do_prlimit and set/getpriority are
not necessary in all cases.
Based on a cycles profile, it looked like ~87% of the time was spent
in the kernel, ~42% of which was just trying to get *some* spinlock
(queued_spin_lock_slowpath, not necessarily the tasklist_lock).
The big offenders (with rough percentages in cycles of the overall
trace):
- do_wait 11%
- setpriority 8% (done previously in commit 7f8ca0edfe)
- kill 8%
- do_exit 5%
- clone 3%
- prlimit64 2% (this patchset)
- getrlimit 1% (this patchset)
I can't easily test this patchset on the original workload for various
reasons. Instead, I used the microbenchmark below to at least verify
there was some improvement. This patchset had a 28% speedup (12% from
baseline to set/getprio, then another 14% for prlimit).
This series used to do the setpriority case, but an almost identical
change was merged as commit 7f8ca0edfe ("kernel/sys.c: only take
tasklist_lock for get/setpriority(PRIO_PGRP)") so that has been
dropped from here.
One interesting thing is that my libc's getrlimit() was calling
prlimit64, so hoisting the read_lock(tasklist_lock) into sys_prlimit64
had no effect - it essentially optimized the older syscalls only. I
didn't do that in this patchset, but figured I'd mention it since it
was an option from the previous patch's discussion"
micobenchmark.c:
---------------
int main(int argc, char **argv)
{
pid_t child;
struct rlimit rlim[1];
fork(); fork(); fork(); fork(); fork(); fork();
for (int i = 0; i < 5000; i++) {
child = fork();
if (child < 0)
exit(1);
if (child > 0) {
usleep(1000);
kill(child, SIGTERM);
waitpid(child, NULL, 0);
} else {
for (;;) {
setpriority(PRIO_PROCESS, 0,
getpriority(PRIO_PROCESS, 0));
getrlimit(RLIMIT_CPU, rlim);
}
}
}
return 0;
}
Link: https://lore.kernel.org/lkml/20211213220401.1039578-1-brho@google.com/ [v1]
Link: https://lore.kernel.org/lkml/20220105212828.197013-1-brho@google.com/ [v2]
Link: https://lore.kernel.org/lkml/20220106172041.522167-1-brho@google.com/ [v3]
* tag 'prlimit-tasklist_lock-for-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
prlimit: do not grab the tasklist_lock
prlimit: make do_prlimit() static
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjr50AAKCRCRxhvAZXjc
oroBAQC0daGrkl6XJirLzyMVjNWWbuSEdB+Q3ipMrwySxjYmtwD/XSPGAKGBbHQz
13EtvTMT8FlqSyDIKHYBM5uDyrWQZgs=
=uJdq
-----END PGP SIGNATURE-----
Merge tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount attributes PREEMPT_RT update from Christian Brauner:
"This contains Sebastian's fix to make changing mount
attributes/getting write access compatible with CONFIG_PREEMPT_RT.
The change only applies when users explicitly opt-in to real-time via
CONFIG_PREEMPT_RT otherwise things are exactly as before. We've waited
quite a long time with this to make sure folks could take a good look"
* tag 'fs.rt.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
fs/namespace: Boost the mount_lock.lock owner instead of spinning on PREEMPT_RT.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYjrxKAAKCRCRxhvAZXjc
oi77AQDdLziGyeKSHlyPw1xeWiqsZVRLhhD07F8kVaAkjg3ZWwEAs3jL0Pzfnd7J
IIx//6YK46cbfc471FdVuUDfMjkfVAw=
=VaFd
-----END PGP SIGNATURE-----
Merge tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull mount_setattr updates from Christian Brauner:
"This contains a few more patches to massage the mount_setattr()
codepaths and one minor fix to reuse a helper we added some time back.
The final two patches do similar cleanups in different ways. One patch
is mine and the other is Al's who was nice enough to give me a branch
for it.
Since his came in later and my branch had been sitting in -next for
quite some time we just put his on top instead of swap them"
* tag 'fs.v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mount_setattr(): clean the control flow and calling conventions
fs: clean up mount_setattr control flow
fs: don't open-code mnt_hold_writers()
fs: simplify check in mount_setattr_commit()
fs: add mnt_allow_writers() and simplify mount_setattr_prepare()
Currently kdb_putarea_size() uses copy_from_kernel_nofault() to write *to*
arbitrary kernel memory. This is obviously wrong and means the memory
modify ('mm') command is a serious risk to debugger stability: if we poke
to a bad address we'll double-fault and lose our debug session.
Fix this the (very) obvious way.
Note that there are two Fixes: tags because the API was renamed and this
patch will only trivially backport as far as the rename (and this is
probably enough). Nevertheless Christoph's rename did not introduce this
problem so I wanted to record that!
Fixes: fe557319aa ("maccess: rename probe_kernel_{read,write} to copy_{from,to}_kernel_nofault")
Fixes: 5d5314d679 ("kdb: core for kgdb back end (1 of 2)")
Signed-off-by: Daniel Thompson <daniel.thompson@linaro.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20220128144055.207267-1-daniel.thompson@linaro.org
There is no reason to retry the operation if a session error had
occurred in such case result structure isn't filled out.
Fixes: dff58530c4 ("NFSv4.1: fix handling of backchannel binding in BIND_CONN_TO_SESSION")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
When a task is being retried, due to an NFS error, if the assigned
transport has been put offline and the task is relocatable pick a new
transport.
Fixes: 6f081693e7 ("sunrpc: remove an offlined xprt using sysfs")
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
To move the list iterator variable into the list_for_each_entry_*()
macro in the future it should be avoided to use the list iterator
variable after the loop body.
To *never* use the list iterator variable after the loop it was
concluded to use a separate iterator variable instead of a
found boolean [1].
This removes the need to use a found variable and simply checking if
the variable was set, can determine if the break/goto was hit.
Link: https://lore.kernel.org/all/CAHk-=wgRr_D8CB-D9Kg-c=EHreAsk5SqXPwr9Y7k9sA6cWXJ6w@mail.gmail.com/
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Do not reset IP_CT_TCP_FLAG_BE_LIBERAL flag in out-of-sync scenarios
coming before the TCP window tracking, otherwise such connections will
fail in the window check.
Update tcp_options() to leave this flag in place and add a new helper
function to reset the tcp window state.
Based on patch from Sven Auhagen.
Fixes: c4832c7bbc ("netfilter: nf_ct_tcp: improve out-of-sync situation in TCP tracking")
Tested-by: Sven Auhagen <sven.auhagen@voleatech.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Otherwise packets in egress chains seem like they are being received by
the interface, not sent out via it.
Fixes: 42df6e1d22 ("netfilter: Introduce egress hook")
Signed-off-by: Phil Sutter <phil@nwl.cc>
Signed-off-by: Florian Westphal <fw@strlen.de>
Zbook Fury 17 G9 requires the same ALC285_FIXUP_HP_GPIO_LED quirk to
make its audio LEDs work.
So apply the quirk, and make it the last one since it's an LED quirk.
Fixes: 07bcab9394 ("ALSA: hda/realtek: Add support for HP Laptops")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220324062159.241313-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
This was introduced with the message ring opcode, but isn't strictly
required for the request itself. The sender can encode what is needed
in user_data, which is passed to the receiver. It's unclear if having
a separate flag that essentially says "This CQE did not originate from
an SQE on this ring" provides any real utility to applications. While
we can always re-introduce a flag to provide this information, we cannot
take it away at a later point in time.
Remove the flag while we still can, before it's in a released kernel.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Only an EDID CEA extension has byte #3, while the CTA DisplayID Data
Block does not. Don't interpret bogus data for color formats.
For most displays it's probably an unlikely scenario you'd have a CTA
DisplayID Data Block without a CEA extension, but they do exist.
Fixes: e28ad544f4 ("drm/edid: parse CEA blocks embedded in DisplayID")
Cc: <stable@vger.kernel.org>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220323100438.1757295-1-jani.nikula@intel.com
Tag code stored in bit7:5 for CTA block byte[3] is not the same as
CEA extension block definition. Only check CEA block has
basic audio support.
v3: update commit message.
Cc: stable@vger.kernel.org
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Shawn C Lee <shawn.c.lee@intel.com>
Cc: intel-gfx <intel-gfx@lists.freedesktop.org>
Signed-off-by: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: Lee Shawn C <shawn.c.lee@intel.com>
Fixes: e28ad544f4 ("drm/edid: parse CEA blocks embedded in DisplayID")
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220324061218.32739-1-shawn.c.lee@intel.com
Select HAVE_ARCH_NODEDATA_EXTENSION for loongson64 to fix build error
when CONFIG_NUMA=y:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
(.init.text+0x1714): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: (.init.text+0x1730): undefined reference to `node_data'
Also, select HAVE_ARCH_NODEDATA_EXTENSION for sgi-ip27 to fix build error:
mips64el-unknown-linux-gnu-ld: mm/page_alloc.o: in function `free_area_init':
page_alloc.c:(.init.text+0x1ba8): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bcc): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1be4): undefined reference to `node_data'
mips64el-unknown-linux-gnu-ld: page_alloc.c:(.init.text+0x1bf4): undefined reference to `node_data'
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Reviewed-by: Huacai Chen <chenhuacai@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
To quote Linus:
"EVERYBODY should have CONFIG_WERROR=y on at least x86-64 and other
serious architectures, unless you have some completely random
experimental (and broken) compiler.
New compiler warnings are not acceptable."
So this should make at least the most obvious and common ones not go
unnoticed.
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YjsCpoRK7W4l6tSh@zn.tnic
This reverts commit ea91a1d45d.
Since df05c0e949 ("Documentation: Raise the minimum supported version
of LLVM to 11.0.0") the minimum Clang version is now 11.0, which fixed
the UBSAN/KCSAN vs. KCOV incompatibilities.
Link: https://bugs.llvm.org/show_bug.cgi?id=45831
Link: https://lkml.kernel.org/r/YaodyZzu0MTCJcvO@elver.google.com
Link: https://lkml.kernel.org/r/20220128105631.509772-1-elver@google.com
Signed-off-by: Marco Elver <elver@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit ebff7d8f27 ("mem hotunplug: fix kfree() of bootmem
memory"), we could get a resource allocated during boot via
alloc_resource(). And it's required to release the resource using
free_resource(). Howerver, many people use kfree directly which will
result in kernel BUG. In order to fix this without fixing every call
site, just leak a couple of bytes in such corner case.
Link: https://lkml.kernel.org/r/20220217083619.19305-1-linmiaohe@huawei.com
Fixes: ebff7d8f27 ("mem hotunplug: fix kfree() of bootmem memory")
Signed-off-by: Miaohe Lin <linmiaohe@huawei.com>
Suggested-by: David Hildenbrand <david@redhat.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Alistair Popple <apopple@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Allocate the kcov buffer during KCOV_MODE_INIT in order to untie mmapping
of a kcov instance and the actual coverage collection process. Modify
kcov_mmap, so that it can be reliably used any number of times once
KCOV_MODE_INIT has succeeded.
These changes to the user-facing interface of the tool only weaken the
preconditions, so all existing user space code should remain compatible
with the new version.
Link: https://lkml.kernel.org/r/20220117153634.150357-3-nogikh@google.com
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Marco Elver <elver@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Taras Madan <tarasmadan@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kcov: improve mmap processing", v3.
Subsequent mmaps of the same kcov descriptor currently do not update the
virtual memory of the task and yet return 0 (success). This is
counter-intuitive and may lead to unexpected memory access errors.
Also, this unnecessarily limits the functionality of kcov to only the
simplest usage scenarios. Kcov instances are effectively forever attached
to their first address spaces and it becomes impossible to e.g. reuse the
same kcov handle in forked child processes without mmapping the memory
first. This is exactly what we tried to do in syzkaller and inadvertently
came upon this behavior.
This patch series addresses the problem described above.
This patch (of 3):
Currently all ioctls are de facto processed under a spinlock in order to
serialise them. This, however, prohibits the use of vmalloc and other
memory management functions in the implementations of those ioctls,
unnecessary complicating any further changes to the code.
Let all ioctls first be processed inside the kcov_ioctl() function which
should execute the ones that are not compatible with spinlock and then
pass control to kcov_ioctl_locked() for all other ones.
KCOV_REMOTE_ENABLE is processed both in kcov_ioctl() and
kcov_ioctl_locked() as the steps are easily separable.
Although it is still compatible with a spinlock, move KCOV_INIT_TRACE
handling to kcov_ioctl(), so that the changes from the next commit are
easier to follow.
Link: https://lkml.kernel.org/r/20220117153634.150357-1-nogikh@google.com
Link: https://lkml.kernel.org/r/20220117153634.150357-2-nogikh@google.com
Signed-off-by: Aleksandr Nogikh <nogikh@google.com>
Reviewed-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Marco Elver <elver@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Taras Madan <tarasmadan@google.com>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The panic_print setting allows users to collect more information in a
panic event, like memory stats, tasks, CPUs backtraces, etc. This is an
interesting debug mechanism, but currently the print event happens *after*
kmsg_dump(), meaning that pstore, for example, cannot collect a dmesg with
the panic_print extra information.
This patch changes that in 2 steps:
(a) The panic_print setting allows to replay the existing kernel log
buffer to the console (bit 5), besides the extra information dump.
This functionality makes sense only at the end of the panic()
function. So, we hereby allow to distinguish the two situations by a
new boolean parameter in the function panic_print_sys_info().
(b) With the above change, we can safely call panic_print_sys_info()
before kmsg_dump(), allowing to dump the extra information when using
pstore or other kmsg dumpers.
The additional messages from panic_print could overwrite the oldest
messages when the buffer is full. The only reasonable solution is to use
a large enough log buffer, hence we added an advice into the kernel
parameters documentation about that.
Link: https://lkml.kernel.org/r/20220214141308.841525-1-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Acked-by: Baoquan He <bhe@redhat.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Currently the "panic_print" parameter/sysctl allows some interesting debug
information to be printed during a panic event. This is useful for
example in cases the user cannot kdump due to resource limits, or if the
user collects panic logs in a serial output (or pstore) and prefers a fast
reboot instead of a kdump.
Happens that currently there's no way to see all CPUs backtraces in a
panic using "panic_print" on architectures that support that. We do have
"oops_all_cpu_backtrace" sysctl, but although partially overlapping in the
functionality, they are orthogonal in nature: "panic_print" is a panic
tuning (and we have panics without oopses, like direct calls to panic() or
maybe other paths that don't go through oops_enter() function), and the
original purpose of "oops_all_cpu_backtrace" is to provide more
information on oopses for cases in which the users desire to continue
running the kernel even after an oops, i.e., used in non-panic scenarios.
So, we hereby introduce an additional bit for "panic_print" to allow
dumping the CPUs backtraces during a panic event.
Link: https://lkml.kernel.org/r/20211109202848.610874-3-gpiccoli@igalia.com
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Some improvements on panic_print".
This is a mix of a documentation fix with some additions to the
"panic_print" syscall / parameter. The goal here is being able to collect
all CPUs backtraces during a panic event and also to enable "panic_print"
in a kdump event - details of the reasoning and design choices in the
patches.
This patch (of 3):
Commit de6da1e8bc ("panic: add an option to replay all the printk
message in buffer") added a new bit to the sysctl/kernel parameter
"panic_print", but the documentation was added only in
kernel-parameters.txt, not in the sysctl guide.
Fix it here by adding bit 5 to sysctl admin-guide documentation.
[rdunlap@infradead.org: fix table format warning]
Link: https://lkml.kernel.org/r/20220109055635.6999-1-rdunlap@infradead.org
Link: https://lkml.kernel.org/r/20211109202848.610874-1-gpiccoli@igalia.com
Link: https://lkml.kernel.org/r/20211109202848.610874-2-gpiccoli@igalia.com
Fixes: de6da1e8bc ("panic: add an option to replay all the printk message in buffer")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Reviewed-by: Feng Tang <feng.tang@intel.com>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Iurii Zaikin <yzaikin@google.com>
Cc: Samuel Iglesias Gonsalvez <siglesias@igalia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
make clang-analyzer on x86_64 defconfig caught my attention with:
kernel/taskstats.c:120:2: warning: Value stored to 'rc' is never read \
[clang-analyzer-deadcode.DeadStores]
rc = 0;
^
Commit d94a041519 ("taskstats: free skb, avoid returns in
send_cpu_listeners") made send_cpu_listeners() not return a value and
hence, the rc variable remained only to be used within the loop where
it is always assigned before read and it does not need any other
initialisation.
So, simply remove this unneeded dead initializing assignment.
As compilers will detect this unneeded assignment and optimize this anyway,
the resulting object code is identical before and after this change.
No functional change. No change to object code.
[akpm@linux-foundation.org: reduce scope of `rc']
Link: https://lkml.kernel.org/r/20220307093942.21310-1-lukas.bulwahn@gmail.com
Signed-off-by: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Cc: Balbir Singh <bsingharora@gmail.com>
Cc: Tom Rix <trix@redhat.com>
Cc: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
panic_on_warn is unset inside panic(), so no need to unset it before
calling panic() in end_report().
Link: https://lkml.kernel.org/r/1644324666-15947-6-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
panic_on_warn is unset inside panic(), so no need to unset it before
calling panic() in ubsan_epilogue().
Link: https://lkml.kernel.org/r/1644324666-15947-5-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In the current code, the following three places need to unset
panic_on_warn before calling panic() to avoid recursive panics:
kernel/kcsan/report.c: print_report()
kernel/sched/core.c: __schedule_bug()
mm/kfence/report.c: kfence_report_error()
In order to avoid copy-pasting "panic_on_warn = 0" all over the places,
it is better to move it inside panic() and then remove it from the other
places.
Link: https://lkml.kernel.org/r/1644324666-15947-4-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Except cp and makedumpfile, add scp example to write out the dump file.
Link: https://lkml.kernel.org/r/1644324666-15947-3-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "Update doc and fix some issues about kdump", v2.
This patch (of 5):
After commit 6a108a14fa ("kconfig: rename CONFIG_EMBEDDED to
CONFIG_EXPERT"), "Configure standard kernel features (for small
systems)" is not exist, we should use "Configure standard kernel
features (expert users)" now.
Link: https://lkml.kernel.org/r/1644324666-15947-1-git-send-email-yangtiezhu@loongson.cn
Link: https://lkml.kernel.org/r/1644324666-15947-2-git-send-email-yangtiezhu@loongson.cn
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Marco Elver <elver@google.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Xuefeng Li <lixuefeng@loongson.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
Link: https://lkml.kernel.org/r/20211206160514.2000-5-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
Link: https://lkml.kernel.org/r/20211206160514.2000-4-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by a
check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
Link: https://lkml.kernel.org/r/20211206160514.2000-3-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Patch series "kexec: use IS_ENABLED(CONFIG_KEXEC_CORE) instead of #ifdef", v2.
Replace the conditional compilation using "#ifdef CONFIG_KEXEC_CORE" by
a check for "IS_ENABLED(CONFIG_KEXEC_CORE)", to simplify the code and
increase compile coverage.
I only modified x86, arm, arm64 and riscv, other architectures such as
sh, powerpc and s390 are better to be kept kexec code as-is so they are
not touched.
This patch (of 5):
Make the forward declarations of crashk_res, crashk_low_res and
crash_notes always visible. Code referring to these symbols can then just
check for IS_ENABLED(CONFIG_KEXEC_CORE), instead of requiring conditional
compilation using an #ifdef, thus preparing to increase compile coverage
and simplify the code.
Link: https://lkml.kernel.org/r/20211206160514.2000-1-jszhang@kernel.org
Link: https://lkml.kernel.org/r/20211206160514.2000-2-jszhang@kernel.org
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Acked-by: Baoquan He <bhe@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Albert Ou <aou@eecs.berkeley.edu>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Alexandre Ghiti <alex@ghiti.fr>
Cc: Palmer Dabbelt <palmer@rivosinc.com>
Cc: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
All callers of cgroup_rstat_flush_locked() acquire cgroup_rstat_lock
either with spin_lock_irq() or spin_lock_irqsave().
cgroup_rstat_flush_locked() itself acquires cgroup_rstat_cpu_lock which
is a raw_spin_lock. This lock is also acquired in
cgroup_rstat_updated() in IRQ context and therefore requires _irqsave()
locking suffix in cgroup_rstat_flush_locked().
Since there is no difference between spin_lock_t and raw_spin_lock_t on
!RT lockdep does not complain here. On RT lockdep complains because the
interrupts were not disabled here and a deadlock is possible.
Acquire the raw_spin_lock_t with disabled interrupts.
Link: https://lkml.kernel.org/r/20220301122143.1521823-2-bigeasy@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zefan Li <lizefan.x@bytedance.com>
From: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Subject: cgroup: add a comment to cgroup_rstat_flush_locked().
Add a comment why spin_lock_irq() -> raw_spin_lock_irqsave() is needed.
Link: https://lkml.kernel.org/r/Yh+DOK73hfVV5ThX@linutronix.de
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Zefan Li <lizefan.x@bytedance.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The put_user(val,ptr) macro wants a pointer to a simple type, but in
fat_ioctl_filldir() the d_name field references an "array of chars". Be
more accurate and explicitly give the pointer to the first character of
the d_name[] array.
I noticed that issue while trying to optimize the parisc put_user()
macro and used an intermediate variable to store the pointer. In that
case I got this error:
In file included from include/linux/uaccess.h:11,
from include/linux/compat.h:17,
from fs/fat/dir.c:18:
fs/fat/dir.c: In function `fat_ioctl_filldir':
fs/fat/dir.c:725:33: error: invalid initializer
725 | if (put_user(0, d2->d_name) || \
| ^~
include/asm/uaccess.h:152:33: note: in definition of macro `__put_user'
152 | __typeof__(ptr) __ptr = ptr; \
| ^~~
fs/fat/dir.c:759:1: note: in expansion of macro `FAT_IOCTL_FILLDIR_FUNC'
759 | FAT_IOCTL_FILLDIR_FUNC(fat_ioctl_filldir, __fat_dirent)
Andreas Schwab <schwab@linux-m68k.org> suggested to use
__typeof__(&*(ptr)) __ptr = ptr;
instead. This works, but nevertheless it's probably reasonable to fix
the original caller too.
Link: https://lkml.kernel.org/r/Ygo+A9MREmC1H3kr@p100
Signed-off-by: Helge Deller <deller@gmx.de>
Acked-by: OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
Cc: David Laight <David.Laight@aculab.com>
Cc: Andreas Schwab <schwab@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Testcase:
1. create a minix file system and mount it
2. open a file on the file system with O_RDWR|O_CREAT|O_TRUNC|O_DIRECT
3. open fails with -EINVAL but leaves an empty file behind. All other
open() failures don't leave the failed open files behind.
It is hard to check the direct_IO op before creating the inode. Just as
ext4 and btrfs do, this patch will resolve the issue by allowing to
create the file with O_DIRECT but returning error when writing the file.
Link: https://lkml.kernel.org/r/20220107133626.413379-1-qhjin.dev@gmail.com
Signed-off-by: Qinghua Jin <qhjin.dev@gmail.com>
Reported-by: Colin Ian King <colin.king@intel.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
head, tail, ring_size are declared as unsigned int, so all local
variables that operate with these fields have to be unsigned to avoid
signed integer overflow.
Right now, it isn't an issue because the maximum pipe size is limited by
1U<<31.
Link: https://lkml.kernel.org/r/20220106171946.36128-1-avagin@gmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Suggested-by: Dmitry Safonov <0x7f454c46@gmail.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Right now, kcalloc is used to allocate a pipe_buffer array. The size of
the pipe_buffer struct is 40 bytes. kcalloc allows allocating reliably
chunks with sizes less or equal to PAGE_ALLOC_COSTLY_ORDER (3). It
means that the maximum pipe size is 3.2MB in this case.
In CRIU, we use pipes to dump processes memory. CRIU freezes a target
process, injects a parasite code into it and then this code splices
memory into pipes. If a maximum pipe size is small, we need to do many
iterations or create many pipes.
kvcalloc attempt to allocate physically contiguous memory, but upon
failure, fall back to non-contiguous (vmalloc) allocation and so it
isn't limited by PAGE_ALLOC_COSTLY_ORDER.
The maximum pipe size for non-root users is limited by the
/proc/sys/fs/pipe-max-size sysctl that is 1MB by default, so only the
root user will be able to trigger vmalloc allocations.
Link: https://lkml.kernel.org/r/20220104171058.22580-1-avagin@gmail.com
Signed-off-by: Andrei Vagin <avagin@gmail.com>
Reviewed-by: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
initcall_blacklist() should return 1 to indicate that it handled its
cmdline arguments.
set_debug_rodata() should return 1 to indicate that it handled its
cmdline arguments. Print a warning if the option string is invalid.
This prevents these strings from being added to the 'init' program's
environment as they are not init arguments/parameters.
Link: https://lkml.kernel.org/r/20220221050901.23985-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Igor noted in [1] that there are quite a few __setup() handling
functions that return incorrect values. Doing this can be harmless, but
it can also cause strings to be added to init's argument or environment
list, polluting them.
Since __setup() handling and return values are not documented, first add
documentation for that. Also add more documentation for early_param()
handling and return values.
For __setup() functions, returning 0 (not handled) has questionable
value if it is just a malformed option value, as in
rodata=junk
since returning 0 would just cause "rodata=junk" to be added to init's
environment unnecessarily:
Run /sbin/init as init process
with arguments:
/sbin/init
with environment:
HOME=/
TERM=linux
splash=native
rodata=junk
Also, there are no recommendations on whether to print a warning when an
unknown parameter value is seen. I am not addressing that here.
[1] lore.kernel.org/r/64644a2f-4a20-bab3-1e15-3b2cdd0defe3@omprussia.ru
Link: https://lkml.kernel.org/r/20220221050852.1147-1-rdunlap@infradead.org
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Igor Zhbanov <i.zhbanov@omprussia.ru>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Use ktime_us_delta() to make the initcall_debug log more precise than
right shifting the result of ktime_to_ns() by 10 bits.
Link: https://lkml.kernel.org/r/20220209053350.15771-1-mark-pk.tsai@mediatek.com
Signed-off-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Reviewed-by: Andrew Halaney <ahalaney@redhat.com>
Tested-by: Andrew Halaney <ahalaney@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Kees Cook <keescook@chromium.org>
Cc: Valentin Schneider <valentin.schneider@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: YJ Chiang <yj.chiang@mediatek.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0ee3e7b889 ("checkpatch: get default codespell dictionary path
from package location") introduced the ability to search for the
codespell dictionary rather than hardcoding its path.
codespell requires Python 3.6 or above, but on some systems, the python
executable is a Python 2.7 interpreter. In this case, searching for the
dictionary fails, subsequently making codespell fail:
No codespell typos will be found - file '/usr/share/codespell/dictionary.txt': No such file or directory
So, use python3 to remove ambiguity.
In addition, when searching for dictionary.txt, do not check if the
codespell executable exists since,
- checkpatch.pl only uses dictionary.txt, not the codespell
executable.
- codespell can be installed via a Python package manager, in which
case the codespell executable may not be present in a typical $PATH,
but a dictionary does exist.
Link: https://lkml.kernel.org/r/20220309180048.147672-1-sagarmp@cs.unc.edu
Signed-off-by: Sagar Patel <sagarmp@cs.unc.edu>
Reviewed-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Cc: Joe Perches <joe@perches.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add early_param as another exception to the blank line preferred after
function/struct/union declaration or definition test.
Link: https://lkml.kernel.org/r/3bd6ada59f411a7685d7e64eeb670540d4bfdcde.camel@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Single line code like:
if (foo) bar;
should generally be written:
if (foo)
bar;
Add a --fix test to do so.
This fix is not done when an ASSIGN_IN_IF in the same line exists.
Link: https://lkml.kernel.org/r/20220128185924.80137-2-joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There is no effective difference.
Given the large number of uses of "GPL v2", emit this message only for
patches as a trivial treeside sed could be done one day.
Ref: commit bf7fbeeae6 ("module: Cure the MODULE_LICENSE "GPL" vs. "GPL v2" bogosity")
Link: https://lkml.kernel.org/r/20220128185924.80137-1-joe@perches.com
Signed-off-by: Joe Perches <joe@perches.com>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix kernel-doc warings in lib/bitmap.c:
lib/bitmap.c:498: warning: Function parameter or member 'buf' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'maskp' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'off' not described in 'bitmap_print_to_buf'
lib/bitmap.c:498: warning: Function parameter or member 'count' not described in 'bitmap_print_to_buf'
lib/bitmap.c:561: warning: contents before sections
lib/bitmap.c:606: warning: Function parameter or member 'buf' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'maskp' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'nmaskbits' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'off' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:606: warning: Function parameter or member 'count' not described in 'bitmap_print_list_to_buf'
lib/bitmap.c:819: warning: missing initial short description on line:
* bitmap_parselist_user()
This still leaves 15 warnings for function return values not described,
similar to this one:
bitmap.c:890: warning: No description found for return value of 'bitmap_parse'
Link: https://lkml.kernel.org/r/20220306065823.5153-1-rdunlap@infradead.org
Fixes: 1fae562983 ("cpumask: introduce cpumap_print_list/bitmask_to_buf to support large bitmask and list")
Fixes: 4b060420a5 ("bitmap, irq: add smp_affinity_list interface to /proc/irq")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Yury Norov <yury.norov@gmail.com>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Cc: Tian Tao <tiantao6@hisilicon.com>
Cc: Mike Travis <mike.travis@hpe.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
0Day robots reported there is compiling issue for 'csky' ARCH when
CONFIG_DEBUG_FORCE_DATA_SECTION_ALIGNED is enabled [1]:
All errors (new ones prefixed by >>):
{standard input}: Assembler messages:
>> {standard input}:2277: Error: pcrel offset for branch to .LS000B too far (0x3c)
Which was discussed in [2]. And as there is no solution for csky yet, add
some dependency for this config to limit it to several ARCHs which have no
compiling issue so far.
[1]. https://lore.kernel.org/lkml/202202271612.W32UJAj2-lkp@intel.com/
[2]. https://www.spinics.net/lists/linux-kbuild/msg30298.html
Link: https://lkml.kernel.org/r/20220304021100.GN4548@shbuild999.sh.intel.com
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Cc: Guo Ren <guoren@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
It's not obvious that bitfield.h doesn't guarantee the bits.h inclusion
and the example in the former is confusing. Some developers think that
it's okay to just include bitfield.h to get it working. Change example
to explicitly include necessary headers in order to avoid confusion.
Link: https://lkml.kernel.org/r/20220207123341.47533-1-andriy.shevchenko@linux.intel.com
Fixes: 3e9b3112ec ("add basic register-field manipulation macros")
Depends-on: 8bd9cb51da ("locking/atomics, asm-generic: Move some macros from <linux/bitops.h> to a new <linux/bits.h> file")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reported-by: Jan Dąbroś <jsd@semihalf.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Building a kernel with CONFIG_CC_OPTIMISE_FOR_SIZE leads to
__ilog2_u32() being duplicated 50 times and __ilog2_u64() 3 times in
vmlinux on a tiny powerpc32 config.
__ilog2_u32() being 2 instructions it is not worth being kept out of
line, so force inlining. Allthough the u64 version is a bit bigger,
there is still a small benefit in keeping it inlined. On a 64 bits
config there's a real benefit.
With this change the size of vmlinux text is reduced by 1 kbytes, which
is approx 50% more than the size of the removed functions.
Before the patch there is for instance:
c00d2a94 <__ilog2_u32>:
c00d2a94: 7c 63 00 34 cntlzw r3,r3
c00d2a98: 20 63 00 1f subfic r3,r3,31
c00d2a9c: 4e 80 00 20 blr
c00d36d8 <__order_base_2>:
c00d36d8: 28 03 00 01 cmplwi r3,1
c00d36dc: 40 81 00 2c ble c00d3708 <__order_base_2+0x30>
c00d36e0: 94 21 ff f0 stwu r1,-16(r1)
c00d36e4: 7c 08 02 a6 mflr r0
c00d36e8: 38 63 ff ff addi r3,r3,-1
c00d36ec: 90 01 00 14 stw r0,20(r1)
c00d36f0: 4b ff f3 a5 bl c00d2a94 <__ilog2_u32>
c00d36f4: 80 01 00 14 lwz r0,20(r1)
c00d36f8: 38 63 00 01 addi r3,r3,1
c00d36fc: 7c 08 03 a6 mtlr r0
c00d3700: 38 21 00 10 addi r1,r1,16
c00d3704: 4e 80 00 20 blr
c00d3708: 38 60 00 00 li r3,0
c00d370c: 4e 80 00 20 blr
With the patch it has become:
c00d356c <__order_base_2>:
c00d356c: 28 03 00 01 cmplwi r3,1
c00d3570: 40 81 00 14 ble c00d3584 <__order_base_2+0x18>
c00d3574: 38 63 ff ff addi r3,r3,-1
c00d3578: 7c 63 00 34 cntlzw r3,r3
c00d357c: 20 63 00 20 subfic r3,r3,32
c00d3580: 4e 80 00 20 blr
c00d3584: 38 60 00 00 li r3,0
c00d3588: 4e 80 00 20 blr
No more need for __order_base_2() to setup a stack frame and
save/restore caller address. And the following 'add 1' is
merged in the subtract.
Another typical use of it:
c080ff28 <hugepagesz_setup>:
...
c080fff8: 7f c3 f3 78 mr r3,r30
c080fffc: 4b 8f 81 f1 bl c01081ec <__ilog2_u32>
c0810000: 38 63 ff f2 addi r3,r3,-14
...
Becomes
c080ff1c <hugepagesz_setup>:
...
c080ffec: 7f c3 00 34 cntlzw r3,r30
c080fff0: 20 63 00 11 subfic r3,r3,17
...
Here no need to move r30 argument to r3 then substract 14 to result. Just
work on r30 and merge the 'sub 14' with the 'sub from 31'.
Link: https://lkml.kernel.org/r/803a2ac3d923ebcfd0dd40f5886b05cae7bb0aba.1644243860.git.christophe.leroy@csgroup.eu
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
