If userspace does not include the trailing end of batch message, then
nfnetlink aborts the transaction. This allows to check that ruleset
updates trigger no errors.
After this patch, invoking this command from the prerouting chain:
# nft -c add rule x y fib saddr . oif type local
fails since oif is not supported there.
This patch fixes the lack of rule validation from the abort/check path
to catch configuration errors such as the one above.
Fixes: a654de8fdc ("netfilter: nf_tables: fix chain dependency validation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If netfilter changes the packet mark when mangling, the packet is
rerouted using the route_me_harder set of functions. Prior to this
commit, there's one big difference between route_me_harder and the
ordinary initial routing functions, described in the comment above
__ip_queue_xmit():
/* Note: skb->sk can be different from sk, in case of tunnels */
int __ip_queue_xmit(struct sock *sk, struct sk_buff *skb, struct flowi *fl,
That function goes on to correctly make use of sk->sk_bound_dev_if,
rather than skb->sk->sk_bound_dev_if. And indeed the comment is true: a
tunnel will receive a packet in ndo_start_xmit with an initial skb->sk.
It will make some transformations to that packet, and then it will send
the encapsulated packet out of a *new* socket. That new socket will
basically always have a different sk_bound_dev_if (otherwise there'd be
a routing loop). So for the purposes of routing the encapsulated packet,
the routing information as it pertains to the socket should come from
that socket's sk, rather than the packet's original skb->sk. For that
reason __ip_queue_xmit() and related functions all do the right thing.
One might argue that all tunnels should just call skb_orphan(skb) before
transmitting the encapsulated packet into the new socket. But tunnels do
*not* do this -- and this is wisely avoided in skb_scrub_packet() too --
because features like TSQ rely on skb->destructor() being called when
that buffer space is truely available again. Calling skb_orphan(skb) too
early would result in buffers filling up unnecessarily and accounting
info being all wrong. Instead, additional routing must take into account
the new sk, just as __ip_queue_xmit() notes.
So, this commit addresses the problem by fishing the correct sk out of
state->sk -- it's already set properly in the call to nf_hook() in
__ip_local_out(), which receives the sk as part of its normal
functionality. So we make sure to plumb state->sk through the various
route_me_harder functions, and then make correct use of it following the
example of __ip_queue_xmit().
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Reviewed-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Commit 3193c0836 ("bpf: Disable GCC -fgcse optimization for
___bpf_prog_run()") introduced a __no_fgcse macro that expands to a
function scope __attribute__((optimize("-fno-gcse"))), to disable a
GCC specific optimization that was causing trouble on x86 builds, and
was not expected to have any positive effect in the first place.
However, as the GCC manual documents, __attribute__((optimize))
is not for production use, and results in all other optimization
options to be forgotten for the function in question. This can
cause all kinds of trouble, but in one particular reported case,
it causes -fno-asynchronous-unwind-tables to be disregarded,
resulting in .eh_frame info to be emitted for the function.
This reverts commit 3193c0836, and instead, it disables the -fgcse
optimization for the entire source file, but only when building for
X86 using GCC with CONFIG_BPF_JIT_ALWAYS_ON disabled. Note that the
original commit states that CONFIG_RETPOLINE=n triggers the issue,
whereas CONFIG_RETPOLINE=y performs better without the optimization,
so it is kept disabled in both cases.
Fixes: 3193c0836f ("bpf: Disable GCC -fgcse optimization for ___bpf_prog_run()")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAMuHMdUg0WJHEcq6to0-eODpXPOywLot6UD2=GFHpzoj_hCoBQ@mail.gmail.com/
Link: https://lore.kernel.org/bpf/20201028171506.15682-2-ardb@kernel.org
Hi Linus,
Please, pull the following patch that fixes almost 40,000 fall-through
warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1]
change reverted. Notice that in order to enable -Wimplicit-fallthrough
for Clang, such change[1] is meant to be reverted at some point. So,
this patch helps to move in that direction.
- include: jhash/signal: Fix fall-through warnings for Clang
[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
-----BEGIN PGP SIGNATURE-----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=RZ7h
-----END PGP SIGNATURE-----
Merge tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull fallthrough fix from Gustavo A. R. Silva:
"This fixes a ton of fall-through warnings when building with Clang
12.0.0 and -Wimplicit-fallthrough"
* tag 'fallthrough-fixes-clang-5.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
include: jhash/signal: Fix fall-through warnings for Clang
Three notable merge window regressions that didn't get caught/fixed in
time for rc1:
- Fix in kernel users of rxe, they were broken by the rapid fix to undo
the uABI breakage in rxe from another patch
- EFA userspace needs to read the GID table but was broken with the new
GID table logic
- Fix user triggerable deadlock in mlx5 using devlink reload
- Fix deadlock in several ULPs using rdma_connect from the CM handler
callbacks
- Memory leak in qedr
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEfB7FMLh+8QxL+6i3OG33FX4gmxoFAl+bC4cACgkQOG33FX4g
mxpYIBAAiYngi01anQSNZzKgtmskJ1IN4Y22zIck78kCxD0GRWebBVtt4fKHF9am
taZowxoSk2q/CITU96hhEcLRqd3/XWhHBC9tyEPmgNqtU57Sj+2Tei4d7woJF1O1
ifpVijqLTem0PL2fIm0mHjNXciYrRQ2SLE2xOx2UC/nEou3WGh+/WMr7jRHISxTm
W86voaOrJUtz4rF8zogvP3Rk1oIAgV8w37zUSRE1ZQM3yJPcVxXb5wa7ksskZ5MC
uamknMZQyEXpGNqluTQclirrgeX6ArJPwWeoY3O6GoaxUwKcFVGgDFKs/HolTjRn
+EGUkBsfZ59XiRmC80CHnvi4SO6Zw145tgxl+nFJdBoXVTrfBiWMnduzkxflfGQs
6pUjVDuw97/hjfgnrmVvtN291AkovbWKQvnMW9EauY5Hx5FmcBi1b6s6tVwW8k1f
ORDDsXLiL02uqfjEi6EnXjWPnbjRNKJqZG0FfTW4Az6uQYQ6Jxzso6epj3vZir99
WzfIAG4o+JVR6Hrtvv542yu1B/S0AXegbNo2LG3plW1Tcd906Dx2l1/el00JfeTe
VQB/Iv6Ka+4ZJBRr91vytWbPRjJyVtV8PVC+lAUweKx+1MOTA5ZJVeCoyD/l++2o
nYZYiVo3DLoDqfVPjJ01DP3vgyxypg449uXqijhNp/uMA2zE+oc=
=5WDf
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma fixes from Jason Gunthorpe:
"The good news is people are testing rc1 in the RDMA world - the bad
news is testing of the for-next area is not as good as I had hoped, as
we really should have caught at least the rdma_connect_locked() issue
before now.
Notable merge window regressions that didn't get caught/fixed in time
for rc1:
- Fix in kernel users of rxe, they were broken by the rapid fix to
undo the uABI breakage in rxe from another patch
- EFA userspace needs to read the GID table but was broken with the
new GID table logic
- Fix user triggerable deadlock in mlx5 using devlink reload
- Fix deadlock in several ULPs using rdma_connect from the CM handler
callbacks
- Memory leak in qedr"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma:
RDMA/qedr: Fix memory leak in iWARP CM
RDMA: Add rdma_connect_locked()
RDMA/uverbs: Fix false error in query gid IOCTL
RDMA/mlx5: Fix devlink deadlock on net namespace deletion
RDMA/rxe: Fix small problem in network_type patch
There are no known users of this driver as of October 2020, and it will
be removed unless someone turns out to still need it in future releases.
According to https://en.wikipedia.org/wiki/List_of_WiMAX_networks, there
have been many public wimax networks, but it appears that many of these
have migrated to LTE or discontinued their service altogether.
As most PCs and phones lack WiMAX hardware support, the remaining
networks tend to use standalone routers. These almost certainly
run Linux, but not a modern kernel or the mainline wimax driver stack.
NetworkManager appears to have dropped userspace support in 2015
https://bugzilla.gnome.org/show_bug.cgi?id=747846, the
www.linuxwimax.org
site had already shut down earlier.
WiMax is apparently still being deployed on airport campus networks
("AeroMACS"), but in a frequency band that was not supported by the old
Intel 2400m (used in Sandy Bridge laptops and earlier), which is the
only driver using the kernel's wimax stack.
Move all files into drivers/staging/wimax, including the uapi header
files and documentation, to make it easier to remove it when it gets
to that. Only minimal changes are made to the source files, in order
to make it possible to port patches across the move.
Also remove the MAINTAINERS entry that refers to a broken mailing
list and website.
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-By: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Suggested-by: Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
In preparation to enable -Wimplicit-fallthrough for Clang, explicitly
add break statements instead of letting the code fall through to the
next case.
This patch adds four break statements that, together, fix almost 40,000
warnings when building Linux 5.10-rc1 with Clang 12.0.0 and this[1] change
reverted. Notice that in order to enable -Wimplicit-fallthrough for Clang,
such change[1] is meant to be reverted at some point. So, this patch helps
to move in that direction.
Something important to mention is that there is currently a discrepancy
between GCC and Clang when dealing with switch fall-through to empty case
statements or to cases that only contain a break/continue/return
statement[2][3][4].
Now that the -Wimplicit-fallthrough option has been globally enabled[5],
any compiler should really warn on missing either a fallthrough annotation
or any of the other case-terminating statements (break/continue/return/
goto) when falling through to the next case statement. Making exceptions
to this introduces variation in case handling which may continue to lead
to bugs, misunderstandings, and a general lack of robustness. The point
of enabling options like -Wimplicit-fallthrough is to prevent human error
and aid developers in spotting bugs before their code is even built/
submitted/committed, therefore eliminating classes of bugs. So, in order
to really accomplish this, we should, and can, move in the direction of
addressing any error-prone scenarios and get rid of the unintentional
fallthrough bug-class in the kernel, entirely, even if there is some minor
redundancy. Better to have explicit case-ending statements than continue to
have exceptions where one must guess as to the right result. The compiler
will eliminate any actual redundancy.
[1] commit e2079e93f5 ("kbuild: Do not enable -Wimplicit-fallthrough for clang for now")
[2] https://github.com/ClangBuiltLinux/linux/issues/636
[3] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=91432
[4] https://godbolt.org/z/xgkvIh
[5] commit a035d552a9 ("Makefile: Globally enable fall-through warning")
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
data=journal bug fix. Also use the generic casefolding support which
has now landed in fs/libfs.c for 5.10.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEK2m5VNv+CHkogTfJ8vlZVpUNgaMFAl+aP/IACgkQ8vlZVpUN
gaM62gf+JWHXh4d4RS4UcFlQWmT0JlMK8AGEdt90PGeJwO7MmAUC8KRFdMxCSdMQ
yqJObRH9w7AFVZYCdroLIC2MyeXj4rASD7DxMgFhu/LYrKOTxCHiTt9gdx/slELM
HQoKB77pYs4AZOMPgo+svqf9aHtHPu1Bk3M2C5WW4/BZHjKCxXDD7wONPFLHOq/0
qTcj2JS+1GAivNzwq8/ZFntmbz316FuKF3LNVUvCP+aTbOwD77NtyaBDGr8pnsnz
duNyX4CYPo27FM9K/ywGQL9ISCIRxEwPN0GeILc3Cawu6bsr5z+ZBYKbt3DuUv18
hl+E7wrOG/+EMLd6TBfvRN1v5YvwPg==
=0J5C
-----END PGP SIGNATURE-----
Merge tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Bug fixes for the new ext4 fast commit feature, plus a fix for the
'data=journal' bug fix.
Also use the generic casefolding support which has now landed in
fs/libfs.c for 5.10"
* tag 'ext4_for_linus_fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: indicate that fast_commit is available via /sys/fs/ext4/feature/...
ext4: use generic casefolding support
ext4: do not use extent after put_bh
ext4: use IS_ERR() for error checking of path
ext4: fix mmap write protection for data=journal mode
jbd2: fix a kernel-doc markup
ext4: use s_mount_flags instead of s_mount_state for fast commit state
ext4: make num of fast commit blocks configurable
ext4: properly check for dirty state in ext4_inode_datasync_dirty()
ext4: fix double locking in ext4_fc_commit_dentry_updates()
There are styluses that only report their battery status when they are
touching the touchscreen; additionally we currently suppress battery
reports if capacity has not changed. To help userspace recognize how long
ago the device reported battery status, let's send the change event through
if either capacity has changed, or at least 30 seconds have passed since
last report we've let through.
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Add a helper function to test the flags of the cpufreq driver in use
againt a given flags mask.
In particular, this will be needed to test the
CPUFREQ_NEED_UPDATE_LIMITS cpufreq driver flag in the schedutil
governor.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A limited nunmber of architectures support hugetlbfs sizes that do not
align with the page-tables (ARM64, Power, Sparc64). Add support for
this to the generic perf_get_page_size() implementation, and also
allow an architecture to override this implementation.
This latter is only needed when it uses non-page-table aligned huge
pages in its kernel map.
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
When studying code layout, it is useful to capture the page size of the
sampled code address.
Add a new sample type for code page size.
The new sample type requires collecting the ip. The code page size can
be calculated from the NMI-safe perf_get_page_size().
For large PEBS, it's very unlikely that the mapping is gone for the
earlier PEBS records. Enable the feature for the large PEBS. The worst
case is that page-size '0' is returned.
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-5-kan.liang@linux.intel.com
Current perf can report both virtual addresses and physical addresses,
but not the MMU page size. Without the MMU page size information of the
utilized page, users cannot decide whether to promote/demote large pages
to optimize memory usage.
Add a new sample type for the data MMU page size.
Current perf already has a facility to collect data virtual addresses.
A page walker is required to walk the pages tables and calculate the
MMU page size from a given virtual address.
On some platforms, e.g., X86, the page walker is invoked in an NMI
handler. So the page walker must be NMI-safe and low overhead. Besides,
the page walker should work for both user and kernel virtual address.
The existing generic page walker, e.g., walk_page_range_novma(), is a
little bit complex and doesn't guarantee the NMI-safe. The follow_page()
is only for user-virtual address.
Add a new function perf_get_page_size() to walk the page tables and
calculate the MMU page size. In the function:
- Interrupts have to be disabled to prevent any teardown of the page
tables.
- For user space threads, the current->mm is used for the page walker.
For kernel threads and the like, the current->mm is NULL. The init_mm
is used for the page walker. The active_mm is not used here, because
it can be NULL.
Quote from Peter Zijlstra,
"context_switch() can set prev->active_mm to NULL when it transfers it
to @next. It does this before @current is updated. So an NMI that
comes in between this active_mm swizzling and updating @current will
see !active_mm."
- The MMU page size is calculated from the page table level.
The method should work for all architectures, but it has only been
verified on X86. Should there be some architectures, which support perf,
where the method doesn't work, it can be fixed later separately.
Reporting the wrong page size would not be fatal for the architecture.
Some under discussion features may impact the method in the future.
Quote from Dave Hansen,
"There are lots of weird things folks are trying to do with the page
tables, like Address Space Isolation. For instance, if you get a
perf NMI when running userspace, current->mm->pgd is *different* than
the PGD that was in use when userspace was running. It's close enough
today, but it might not stay that way."
If the case happens later, lots of consecutive page walk errors will
happen. The worst case is that lots of page-size '0' are returned, which
would not be fatal.
In the perf tool, a check is implemented to detect this case. Once it
happens, a kernel patch could be implemented accordingly then.
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201001135749.2804-2-kan.liang@linux.intel.com
exit_mm should issue memory barriers after user-space memory accesses,
before clearing current->mm, to order user-space memory accesses
performed prior to exit_mm before clearing tsk->mm, which has the
effect of skipping the membarrier private expedited IPIs.
exit_mm should also update the runqueue's membarrier_state so
membarrier global expedited IPIs are not sent when they are not
needed.
The membarrier system call can be issued concurrently with do_exit
if we have thread groups created with CLONE_VM but not CLONE_THREAD.
Here is the scenario I have in mind:
Two thread groups are created, A and B. Thread group B is created by
issuing clone from group A with flag CLONE_VM set, but not CLONE_THREAD.
Let's assume we have a single thread within each thread group (Thread A
and Thread B).
The AFAIU we can have:
Userspace variables:
int x = 0, y = 0;
CPU 0 CPU 1
Thread A Thread B
(in thread group A) (in thread group B)
x = 1
barrier()
y = 1
exit()
exit_mm()
current->mm = NULL;
r1 = load y
membarrier()
skips CPU 0 (no IPI) because its current mm is NULL
r2 = load x
BUG_ON(r1 == 1 && r2 == 0)
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20201020134715.13909-2-mathieu.desnoyers@efficios.com
Add TIF_NOTIFY_SIGNAL handling in the generic entry code, which if set,
will return true if signal_pending() is used in a wait loop. That causes an
exit of the loop so that notify_signal tracehooks can be run. If the wait
loop is currently inside a system call, the system call is restarted once
task_work has been processed.
In preparation for only having arch_do_signal() handle syscall restarts if
_TIF_SIGPENDING isn't set, rename it to arch_do_signal_or_restart(). Pass
in a boolean that tells the architecture specific signal handler if it
should attempt to get a signal, or just process a potential syscall
restart.
For !CONFIG_GENERIC_ENTRY archs, add the TIF_NOTIFY_SIGNAL handling to
get_signal(). This is done to minimize the needed architecture changes to
support this feature.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-3-axboe@kernel.dk
This is in preparation for maintaining signal_pending() as the decider of
whether or not a schedule() loop should be broken, or continue sleeping.
This is different than the core signal use cases, which really need to know
whether an actual signal is pending or not. task_sigpending() returns
non-zero if TIF_SIGPENDING is set.
Only core kernel use cases should care about the distinction between
the two, make sure those use the task_sigpending() helper.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lore.kernel.org/r/20201026203230.386348-2-axboe@kernel.dk
Commit e679654a70 ("bpf: Fix a rcu_sched stall issue with
bpf task/task_file iterator") tries to fix rcu stalls warning
which is caused by bpf task_file iterator when running
"bpftool prog".
rcu: INFO: rcu_sched self-detected stall on CPU
rcu: \x097-....: (20999 ticks this GP) idle=302/1/0x4000000000000000 softirq=1508852/1508852 fqs=4913
\x09(t=21031 jiffies g=2534773 q=179750)
NMI backtrace for cpu 7
CPU: 7 PID: 184195 Comm: bpftool Kdump: loaded Tainted: G W 5.8.0-00004-g68bfc7f8c1b4 #6
Hardware name: Quanta Twin Lakes MP/Twin Lakes Passive MP, BIOS F09_3A17 05/03/2019
Call Trace:
<IRQ>
dump_stack+0x57/0x70
nmi_cpu_backtrace.cold+0x14/0x53
? lapic_can_unplug_cpu.cold+0x39/0x39
nmi_trigger_cpumask_backtrace+0xb7/0xc7
rcu_dump_cpu_stacks+0xa2/0xd0
rcu_sched_clock_irq.cold+0x1ff/0x3d9
? tick_nohz_handler+0x100/0x100
update_process_times+0x5b/0x90
tick_sched_timer+0x5e/0xf0
__hrtimer_run_queues+0x12a/0x2a0
hrtimer_interrupt+0x10e/0x280
__sysvec_apic_timer_interrupt+0x51/0xe0
asm_call_on_stack+0xf/0x20
</IRQ>
sysvec_apic_timer_interrupt+0x6f/0x80
...
task_file_seq_next+0x52/0xa0
bpf_seq_read+0xb9/0x320
vfs_read+0x9d/0x180
ksys_read+0x5f/0xe0
do_syscall_64+0x38/0x60
entry_SYSCALL_64_after_hwframe+0x44/0xa9
The fix is to limit the number of bpf program runs to be
one million. This fixed the program in most cases. But
we also found under heavy load, which can increase the wallclock
time for bpf_seq_read(), the warning may still be possible.
For example, calling bpf_delay() in the "while" loop of
bpf_seq_read(), which will introduce artificial delay,
the warning will show up in my qemu run.
static unsigned q;
volatile unsigned *p = &q;
volatile unsigned long long ll;
static void bpf_delay(void)
{
int i, j;
for (i = 0; i < 10000; i++)
for (j = 0; j < 10000; j++)
ll += *p;
}
There are two ways to fix this issue. One is to reduce the above
one million threshold to say 100,000 and hopefully rcu warning will
not show up any more. Another is to introduce a target feature
which enables bpf_seq_read() calling cond_resched().
This patch took second approach as the first approach may cause
more -EAGAIN failures for read() syscalls. Note that not all bpf_iter
targets can permit cond_resched() in bpf_seq_read() as some, e.g.,
netlink seq iterator, rcu read lock critical section spans through
seq_ops->next() -> seq_ops->show() -> seq_ops->next().
For the kernel code with the above hack, "bpftool p" roughly takes
38 seconds to finish on my VM with 184 bpf program runs.
Using the following command, I am able to collect the number of
context switches:
perf stat -e context-switches -- ./bpftool p >& log
Without this patch,
69 context-switches
With this patch,
75 context-switches
This patch added additional 6 context switches, roughly every 6 seconds
to reschedule, to avoid lengthy no-rescheduling which may cause the
above RCU warnings.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201028061054.1411116-1-yhs@fb.com
Architectures like x86 have their MSI messages in various bits of the data,
address_lo and address_hi field. Composing or decomposing these messages
with bitmasks and shifts is possible, but unreadable gunk.
Allow architectures to provide an architecture specific representation for
each member of msi_msg. Provide empty defaults for each and stick them into
an union.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201024213535.443185-12-dwmw2@infradead.org
`width` and `height` are defined as unsigned in our UAPI font descriptor
`struct console_font`. Make them unsigned in our kernel font descriptor
`struct font_desc`, too.
Also, change the corresponding printk() format identifiers from `%d` to
`%u`, in sti_select_fbfont().
Signed-off-by: Peilin Ye <yepeilin.cs@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20201028105647.1210161-1-yepeilin.cs@gmail.com
This patch removes the MIC drivers from the kernel tree
since the corresponding devices have been discontinued.
Removing the dma and char-misc changes in one patch and
merging via the char-misc tree is best to avoid any
potential build breakage.
Cc: Nikhil Rao <nikhil.rao@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Sudeep Dutt <sudeep.dutt@intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Reviewed-by: Sherry Sun <sherry.sun@nxp.com>
Link: https://lore.kernel.org/r/8c1443136563de34699d2c084df478181c205db4.1603854416.git.sudeep.dutt@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The kernel-doc markup that documents _fc_replay_callback is
missing an asterisk, causing this warning:
../include/linux/jbd2.h:1271: warning: Function parameter or member 'j_fc_replay_callback' not described in 'journal_s'
When building the docs.
Fixes: 609f928af48f ("jbd2: fast commit recovery path")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/6055927ada2015b55b413cdd2670533bdc9a8da2.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
This patch reserves a field in the jbd2 superblock for number of fast
commit blocks. When this value is non-zero, Ext4 uses this field to
set the number of fast commit blocks.
Fixes: 6866d7b3f2 ("ext4/jbd2: add fast commit initialization")
Signed-off-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/20201027044915.2553163-2-harshadshirwadkar@gmail.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Changeset a435b9a143 ("locking/refcount: Provide __refcount API to obtain the old value")
added a set of functions starting with __ that have a new
parameter, adding a series of new warnings:
$ ./scripts/kernel-doc -none include/linux/refcount.h
include/linux/refcount.h:169: warning: Function parameter or member 'oldp' not described in '__refcount_add_not_zero'
include/linux/refcount.h:208: warning: Function parameter or member 'oldp' not described in '__refcount_add'
include/linux/refcount.h:239: warning: Function parameter or member 'oldp' not described in '__refcount_inc_not_zero'
include/linux/refcount.h:261: warning: Function parameter or member 'oldp' not described in '__refcount_inc'
include/linux/refcount.h:291: warning: Function parameter or member 'oldp' not described in '__refcount_sub_and_test'
include/linux/refcount.h:327: warning: Function parameter or member 'oldp' not described in '__refcount_dec_and_test'
include/linux/refcount.h:347: warning: Function parameter or member 'oldp' not described in '__refcount_dec'
The issue is that the kernel-doc markups are now misplaced,
as they should be added just before the functions.
So, move the kernel-doc markups to the proper places,
in order to drop the warnings.
It should be noticed that git show produces a crappy output,
for this patch without "--patience" flag.
Fixes: a435b9a143 ("locking/refcount: Provide __refcount API to obtain the old value")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/7985c31d1ace591bc5e1faa05c367f1295b78afd.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Sphinx 3 now checks for duplicated function declarations:
.../Documentation/networking/kapi:143: ../include/linux/phy.h:163: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'unsigned int phy_supported_speeds (struct phy_device *phy, unsigned int *speeds, unsigned int size)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1034: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1076: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int __phy_read_mmd (struct phy_device *phydev, int devad, u32 regnum)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1088: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.
.../Documentation/networking/kapi:143: ../include/linux/phy.h:1100: WARNING: Duplicate C declaration, also defined in 'networking/kapi'.
Declaration is 'int __phy_write_mmd (struct phy_device *phydev, int devad, u32 regnum, u16 val)'.
It turns that both the C and the H files have the same
kernel-doc markup for the same functions. Let's drop the
at the header file, keeping the one closer to the code.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://lore.kernel.org/r/75e9a357f9a716833d2094b04898754876365e68.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
As reported by kernel-doc:
./include/linux/blk-mq.h:267: warning: Function parameter or member 'active_queues_shared_sbitmap' not described in 'blk_mq_tag_set'
There is now a new member for struct blk_mq_tag_set. Add a
description for it, based on the commit that introduced it.
Fixes: f1b49fdc1c ("blk-mq: Record active_queues_shared_sbitmap per tag_set for when using shared sbitmap")
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Reviewed-by: John Garry <john.garry@huawei.com>
Link: https://lore.kernel.org/r/8e513153b83eefc05e358f51f2632b592c3f6772.1603791716.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Now that all gpiolib irqchip users have been over to use
the irqchip template, we can finally retire the old code
path and leave just one way in to the irqchip: set up the
template when registering the gpio_chip. For a while
we had two code paths for this which was a bit confusing.
This brings this work to a conclusion, there is now one
way of doing this.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Link: https://lore.kernel.org/r/20201019134046.65101-1-linus.walleij@linaro.org
Geert reports that commit be2881824a ("arm64/build: Assert for
unwanted sections") results in build errors on arm64 for configurations
that have CONFIG_MODULES disabled.
The commit in question added ASSERT()s to the arm64 linker script to
ensure that linker generated sections such as .got.plt etc are empty,
but as it turns out, there are corner cases where the linker does emit
content into those sections. More specifically, weak references to
function symbols (which can remain unsatisfied, and can therefore not
be emitted as relative references) will be emitted as GOT and PLT
entries when linking the kernel in PIE mode (which is the case when
CONFIG_RELOCATABLE is enabled, which is on by default).
What happens is that code such as
struct device *(*fn)(struct device *dev);
struct device *iommu_device;
fn = symbol_get(mdev_get_iommu_device);
if (fn) {
iommu_device = fn(dev);
essentially gets converted into the following when CONFIG_MODULES is off:
struct device *iommu_device;
if (&mdev_get_iommu_device) {
iommu_device = mdev_get_iommu_device(dev);
where mdev_get_iommu_device is emitted as a weak symbol reference into
the object file. The first reference is decorated with an ordinary
ABS64 data relocation (which yields 0x0 if the reference remains
unsatisfied). However, the indirect call is turned into a direct call
covered by a R_AARCH64_CALL26 relocation, which is converted into a
call via a PLT entry taking the target address from the associated
GOT entry.
Given that such GOT and PLT entries are unnecessary for fully linked
binaries such as the kernel, let's give these weak symbol references
hidden visibility, so that the linker knows that the weak reference
via R_AARCH64_CALL26 can simply remain unsatisfied.
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Fangrui Song <maskray@google.com>
Acked-by: Jessica Yu <jeyu@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Kees Cook <keescook@chromium.org>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20201027151132.14066-1-ardb@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
gcc warns a few thousand times about the isdigit() shadow:
include/linux/ctype.h:26:19: warning: declaration of 'isdigit' shadows a built-in function [-Wshadow]
As there is already a compiler builtin, just use that, and make
it clear we do that by defining a macro. Unfortunately, clang
does not have the isdigit() builtin, so this has to be conditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There is a common comment marked, instead, with kernel-doc
notation.
Also, some identifiers have different names between their
prototypes and the kernel-doc markup.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Acked-by: Felipe Balbi <balbi@kernel.org>
Link: https://lore.kernel.org/r/0b964be3884def04fcd20ea5c12cb90d0014871c.1603469755.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The UX360CA has a WMI device id 0x00060062, which reports whether the
lid is flipped in tablet mode (1) or in normal laptop mode (0).
Add a quirk (quirk_asus_use_lid_flip_devid) for devices on which this
WMI device should be used to figure out the SW_TABLET_MODE state, as
opposed to the quirk_asus_use_kbd_dock_devid.
Additionally, the device needs to be queried on resume and restore
because the firmware does not generate an event if the laptop is put to
sleep while in tablet mode, flipped to normal mode, and later awoken.
It is assumed other UX360* models have the same WMI device. As such, the
quirk is applied to devices with DMI_MATCH(DMI_PRODUCT_NAME, "UX360").
More devices with this feature need to be tested and added accordingly.
The reason for using an allowlist via the quirk mechanism is that the new
WMI device (0x00060062) is also present on some models which do not have
a 360 degree hinge (at least FX503VD and GL503VD from Hans' DSTS
collection) and therefore its presence cannot be relied on.
Signed-off-by: Samuel Čavoj <samuel@cavoj.net>
Cc: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20201020220944.1075530-1-samuel@cavoj.net
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
According to the SMCCC spec[1](7.5.2 Discovery) the
ARM_SMCCC_ARCH_WORKAROUND_1 function id only returns 0, 1, and
SMCCC_RET_NOT_SUPPORTED.
0 is "workaround required and safe to call this function"
1 is "workaround not required but safe to call this function"
SMCCC_RET_NOT_SUPPORTED is "might be vulnerable or might not be, who knows, I give up!"
SMCCC_RET_NOT_SUPPORTED might as well mean "workaround required, except
calling this function may not work because it isn't implemented in some
cases". Wonderful. We map this SMC call to
0 is SPECTRE_MITIGATED
1 is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
For KVM hypercalls (hvc), we've implemented this function id to return
SMCCC_RET_NOT_SUPPORTED, 0, and SMCCC_RET_NOT_REQUIRED. One of those
isn't supposed to be there. Per the code we call
arm64_get_spectre_v2_state() to figure out what to return for this
feature discovery call.
0 is SPECTRE_MITIGATED
SMCCC_RET_NOT_REQUIRED is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
Let's clean this up so that KVM tells the guest this mapping:
0 is SPECTRE_MITIGATED
1 is SPECTRE_UNAFFECTED
SMCCC_RET_NOT_SUPPORTED is SPECTRE_VULNERABLE
Note: SMCCC_RET_NOT_AFFECTED is 1 but isn't part of the SMCCC spec
Fixes: c118bbb527 ("arm64: KVM: Propagate full Spectre v2 workaround state to KVM guests")
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Acked-by: Marc Zyngier <maz@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Cc: Andre Przywara <andre.przywara@arm.com>
Cc: Steven Price <steven.price@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Cc: stable@vger.kernel.org
Link: https://developer.arm.com/documentation/den0028/latest [1]
Link: https://lore.kernel.org/r/20201023154751.1973872-1-swboyd@chromium.org
Signed-off-by: Will Deacon <will@kernel.org>
add dummy functions to avoid build failure when header files
are included, but drivers are not built.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When there are no audit rules registered, mandatory records (config,
etc.) are missing their accompanying records (syscall, proctitle, etc.).
This is due to audit context dummy set on syscall entry based on absence
of rules that signals that no other records are to be printed. Clear the dummy
bit if any record is generated, open coding this in audit_log_start().
The proctitle context and dummy checks are pointless since the
proctitle record will not be printed if no syscall records are printed.
The fds array is reset to -1 after the first syscall to indicate it
isn't valid any more, but was never set to -1 when the context was
allocated to indicate it wasn't yet valid.
Check ctx->pwd in audit_log_name().
The audit_inode* functions can be called without going through
getname_flags() or getname_kernel() that sets audit_names and cwd, so
set the cwd in audit_alloc_name() if it has not already been done so due to
audit_names being valid and purge all other audit_getcwd() calls.
Revert the LSM dump_common_audit_data() LSM_AUDIT_DATA_* cases from the
ghak96 patch since they are no longer necessary due to cwd coverage in
audit_alloc_name().
Thanks to bauen1 <j2468h@googlemail.com> for reporting LSM situations in
which context->cwd is not valid, inadvertantly fixed by the ghak96 patch.
Please see upstream github issue
https://github.com/linux-audit/audit-kernel/issues/120
This is also related to upstream github issue
https://github.com/linux-audit/audit-kernel/issues/96
Signed-off-by: Richard Guy Briggs <rgb@redhat.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Generally, a cpufreq driver may need to update some internal upper
and lower frequency boundaries on policy max and min changes,
respectively, but currently this does not work if the target
frequency does not change along with the policy limit.
Namely, if the target frequency does not change along with the
policy min or max, the "target_freq == policy->cur" check in
__cpufreq_driver_target() prevents driver callbacks from being
invoked and they do not even have a chance to update the
corresponding internal boundary.
This particularly affects the "powersave" and "performance"
governors that always set the target frequency to one of the
policy limits and it never changes when the other limit is updated.
To allow cpufreq the drivers needing to update internal frequency
boundaries on policy limits changes to avoid this issue, introduce
a new driver flag, CPUFREQ_NEED_UPDATE_LIMITS, that (when set) will
neutralize the check mentioned above.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
There are thousands of warnings about one macro in a W=2 build:
include/linux/filter.h:561:6: warning: declaration of 'ret' shadows a previous local [-Wshadow]
Prefix all the locals in that macro with __ to avoid most of
these warnings.
Fixes: 492ecee892 ("bpf: enable program stats")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20201026162110.3710415-1-arnd@kernel.org
There are no users of this headers file in the kernel.
All users are likely migrated to device tree which is a good thing.
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Harvey Hunt <harveyhuntnexus@gmail.com>
Cc: linux-mips@vger.kernel.org
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
When a mlx5 core devlink instance is reloaded in different net namespace,
its associated IB device is deleted and recreated.
Example sequence is:
$ ip netns add foo
$ devlink dev reload pci/0000:00:08.0 netns foo
$ ip netns del foo
mlx5 IB device needs to attach and detach the netdevice to it through the
netdev notifier chain during load and unload sequence. A below call graph
of the unload flow.
cleanup_net()
down_read(&pernet_ops_rwsem); <- first sem acquired
ops_pre_exit_list()
pre_exit()
devlink_pernet_pre_exit()
devlink_reload()
mlx5_devlink_reload_down()
mlx5_unload_one()
[...]
mlx5_ib_remove()
mlx5_ib_unbind_slave_port()
mlx5_remove_netdev_notifier()
unregister_netdevice_notifier()
down_write(&pernet_ops_rwsem);<- recurrsive lock
Hence, when net namespace is deleted, mlx5 reload results in deadlock.
When deadlock occurs, devlink mutex is also held. This not only deadlocks
the mlx5 device under reload, but all the processes which attempt to
access unrelated devlink devices are deadlocked.
Hence, fix this by mlx5 ib driver to register for per net netdev notifier
instead of global one, which operats on the net namespace without holding
the pernet_ops_rwsem.
Fixes: 4383cfcc65 ("net/mlx5: Add devlink reload")
Link: https://lore.kernel.org/r/20201026134359.23150-1-parav@nvidia.com
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
On some platforms (eg armv7 due to the CONFIG_ARM_DMA_MEM_BUFFERABLE)
MMIO R/W operations always add memory barriers which can increase load,
decrease battery life or in general reduce performance unnecessarily
on devices which access a lot of configuration registers and where
ordering does not matter (eg. media accelerators like the Verisilicon /
Hantro video decoders).
Drivers used to call the relaxed MMIO variants directly but since they
are now accessing the MMIO registers via regmaps (to compensate for
different VPU HW reg layouts via regmap fields), there is a need for a
relaxed API / config to preserve existing behaviour.
Cc: Mark Brown <broonie@kernel.org>
Signed-off-by: Adrian Ratiu <adrian.ratiu@collabora.com>
Link: https://lore.kernel.org/r/20201014203024.954369-1-adrian.ratiu@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The change removes the platform_data include/definition. It only contains
some values for the MICBIAS.
These are moved into 'dt-bindings/sound/adi,adau1977.h' so that they can be
used inside device-trees. When moving then, they need to be converted to
pre-compiler defines, so that the DT compiler can understand them.
The driver then, also needs to include the new
'dt-bindings/sound/adi,adau1977.h' file.
Signed-off-by: Alexandru Ardelean <alexandru.ardelean@analog.com>
Link: https://lore.kernel.org/r/20201019105313.24862-1-alexandru.ardelean@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Like it is done for SET_PERSONALITY with ARM, which requires the ELF
header to select correct personality parameters, x86 requires the
headers when selecting which VDSO to load, instead of relying on the
going-away TIF_IA32/X32 flags.
Add an indirection macro to arch_setup_additional_pages(), that x86 can
reimplement to receive the extra parameter just for ELF files. This
requires no changes to other architectures, who can continue to use the
original arch_setup_additional_pages for ELF and non-ELF binaries.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-8-krisman@collabora.com
Like it is done for SET_PERSONALITY with x86, which requires the ELF header
to select correct personality parameters, x86 requires the headers on
compat_start_thread() to choose starting CS for ELF32 binaries, instead of
relying on the going-away TIF_IA32/X32 flags.
Add an indirection macro to ELF invocations of START_THREAD, that x86 can
reimplement to receive the extra parameter just for ELF files. This
requires no changes to other architectures who don't need the header
information, they can continue to use the original start_thread for ELF and
non-ELF binaries, and it prevents affecting non-ELF code paths for x86.
Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20201004032536.1229030-6-krisman@collabora.com
