Support DW_AT_const_value for variable assignment instead of location.
Note that this requires ftrace supporting immediate value.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406476012.24476.16096289871757175775.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Support multiprobe event if the event is based on function and lines and
kernel supports it. In this case, perf probe creates the first probe
with an event, and tries to append following probes on that event, since
those probes must be on the same source code line.
Before this patch;
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
#
After this patch (on multiprobe supported kernel)
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18 -aR sleep 1
#
Committer testing:
On a kernel that doesn't support multiprobe events, after this patch:
# uname -a
Linux quaco 5.3.8-200.fc30.x86_64 #1 SMP Tue Oct 29 14:46:22 UTC 2019 x86_64 x86_64 x86_64 GNU/Linux
# grep append /sys/kernel/debug/tracing/README
be modified by appending '.descending' or '.ascending' to a
can be modified by appending any of the following modifiers
#
# perf probe -a vfs_read:18
Added new events:
probe:vfs_read_L18 (on vfs_read:18)
probe:vfs_read_L18_1 (on vfs_read:18)
You can now use it in all perf tools, such as:
perf record -e probe:vfs_read_L18_1 -aR sleep 1
# perf probe -l
probe:vfs_read_L18 (on vfs_read:18@fs/read_write.c)
probe:vfs_read_L18_1 (on vfs_read:18@fs/read_write.c)
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406475010.24476.586290752591512351.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Generate event name from function name with line number as
<function>_L<line_number>. Note that this is only for the new event
which is defined by the line number of function (except for line 0).
If there is another event on same line, you have to use
"-f" option. In that case, the new event has "_1" suffix.
e.g.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read_L2 (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read_L2 -aR sleep 1
But if we omit the line number or 0th line, it will
have no suffix.
# perf probe -a kernel_read:0
Added new event:
probe:kernel_read (on kernel_read)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
probe:kernel_read (on kernel_read@linux-5.0.0/fs/read_write.c)
probe:kernel_read_L2 (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406474026.24476.2828897745502059569.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since perf probe -L shows non representive lines, it can be mislead
users where user can put probes. This prevents to show such non
representive lines so that user can understand which lines user can
probe.
# perf probe -L kernel_read
<kernel_read@/build/linux-pvZVvI/linux-5.0.0/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(get_ds());
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
Committer testing:
Before:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
1 {
2 mm_segment_t old_fs;
3 ssize_t result;
5 old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
See the 1, 3, 5 lines? They shouldn't be there, after this patch:
# perf probe -L kernel_read
<kernel_read@/usr/src/debug/kernel-5.3.fc30/linux-5.3.8-200.fc30.x86_64/fs/read_write.c:0>
0 ssize_t kernel_read(struct file *file, void *buf, size_t count, loff_t *pos)
{
2 mm_segment_t old_fs;
ssize_t result;
old_fs = get_fs();
6 set_fs(KERNEL_DS);
/* The cast to a user pointer is valid due to the set_fs() */
8 result = vfs_read(file, (void __user *)buf, count, pos);
9 set_fs(old_fs);
10 return result;
}
EXPORT_SYMBOL(kernel_read);
#
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406473064.24476.2913278267727587314.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Verify user given probe line is a representive line (which doesn't share
the address with other lines or the line is the least line among the
lines which shares same address), and if not, it shows what is the
representive line.
Without this fix, user can put a probe on the lines which is not a a
representive line. But since this is not a representive line, perf probe
-l shows a representive line number instead of user given line number.
e.g. (put kernel_read:3, but listed as kernel_read:2)
# perf probe -a kernel_read:3
Added new event:
probe:kernel_read (on kernel_read:3)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
With this fix, perf probe doesn't allow user to put a probe on a
representive line, and tell what is the representive line.
# perf probe -a kernel_read:3
This line is sharing the addrees with other lines.
Please try to probe at kernel_read:2 instead.
Error: Failed to add events.
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406472071.24476.14915451439785001021.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The dwarf_getsrc_die() can return the line which is not a statement nor
the least line number among the lines which shares same address.
This can lead perf probe --list shows incorrect line number for probed
address.
To fix this, this introduces cu_getsrc_die() which returns only a
statement line and which is the least line number (we call it the
representive line for an address), and use it in cu_find_lineinfo().
Also, if the given address is the entry address of a real function,
cu_find_lineinfo() returns the function declared line number instead of
the start line number of the function body.
For example, without this change perf probe -l shows incorrect line as
below.
# perf probe -a kernel_read:2
Added new event:
probe:kernel_read (on kernel_read:2)
You can now use it in all perf tools, such as:
perf record -e probe:kernel_read -aR sleep 1
# perf probe -l
probe:kernel_read (on kernel_read:1@linux-5.0.0/fs/read_write.c)
With this fix, it shows correct line number as below;
# perf probe -l
probe:kernel_read (on kernel_read:2@linux-5.0.0/fs/read_write.c)
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Tom Zanussi <tom.zanussi@linux.intel.com>
Link: http://lore.kernel.org/lkml/157406471067.24476.17463149618465494448.stgit@devnote2
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add to the "x86 instruction decoder - new instructions" test the following
instructions:
cldemote
tpause
umonitor
umwait
movdiri
movdir64b
enqcmd
enqcmds
encls
enclu
enclv
pconfig
wbnoinvd
For information about the instructions, refer Intel SDM May 2019
(325462-070US) and Intel Architecture Instruction Set Extensions
May 2019 (319433-037).
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: x86@kernel.org
Link: http://lore.kernel.org/lkml/20191115135447.6519-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently, with latest llvm trunk, selftest test_progs failed obj
file test_seg6_loop.o with the following error in verifier:
infinite loop detected at insn 76
The byte code sequence looks like below, and noted that alu32 has been
turned off by default for better generated codes in general:
48: w3 = 100
49: *(u32 *)(r10 - 68) = r3
...
; if (tlv.type == SR6_TLV_PADDING) {
76: if w3 == 5 goto -18 <LBB0_19>
...
85: r1 = *(u32 *)(r10 - 68)
; for (int i = 0; i < 100; i++) {
86: w1 += -1
87: if w1 == 0 goto +5 <LBB0_20>
88: *(u32 *)(r10 - 68) = r1
The main reason for verification failure is due to partial spills at
r10 - 68 for induction variable "i".
Current verifier only handles spills with 8-byte values. The above 4-byte
value spill to stack is treated to STACK_MISC and its content is not
saved. For the above example:
w3 = 100
R3_w=inv100 fp-64_w=inv1086626730498
*(u32 *)(r10 - 68) = r3
R3_w=inv100 fp-64_w=inv1086626730498
...
r1 = *(u32 *)(r10 - 68)
R1_w=inv(id=0,umax_value=4294967295,var_off=(0x0; 0xffffffff))
fp-64=inv1086626730498
To resolve this issue, verifier needs to be extended to track sub-registers
in spilling, or llvm needs to enhanced to prevent sub-register spilling
in register allocation phase. The former will increase verifier complexity
and the latter will need some llvm "hacking".
Let us workaround this issue by declaring the induction variable as "long"
type so spilling will happen at non sub-register level. We can revisit this
later if sub-register spilling causes similar or other verification issues.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andriin@fb.com>
Link: https://lore.kernel.org/bpf/20191117214036.1309510-1-yhs@fb.com
When run_kselftests.sh is run, it hangs after test_tc_tunnel.sh. The reason
is test_tc_tunnel.sh ensures the server ('nc -l') is run all the time,
starting it again every time it is expected to terminate. The exception is
the final client_connect: the server is not started anymore, which ensures
no process is kept running after the test is finished.
For a sit test, though, the script is terminated prematurely without the
final client_connect and the 'nc' process keeps running. This in turn causes
the run_one function in kselftest/runner.sh to hang forever, waiting for the
runaway process to finish.
Ensure a remaining server is terminated on cleanup.
Fixes: f6ad6accaa ("selftests/bpf: expand test_tc_tunnel with SIT encap")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/bpf/60919291657a9ee89c708d8aababc28ebe1420be.1573821780.git.jbenc@redhat.com
The actual test to run is test_xdping.sh, which is already in TEST_PROGS.
The xdping program alone is not runnable with 'make run_tests', it
immediatelly fails due to missing arguments.
Move xdping to TEST_GEN_PROGS_EXTENDED in order to be built but not run.
Fixes: cd5385029f ("selftests/bpf: measure RTT from xdp using xdping")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Alan Maguire <alan.maguire@oracle.com>
Acked-by: Toke Høiland-Jørgensen <toke@redhat.com>
Link: https://lore.kernel.org/bpf/4365c81198f62521344c2215909634407184387e.1573821726.git.jbenc@redhat.com
While checking the results of the :c:func: removal, I noticed that there
was no documentation for request_irq(), and request_threaded_irq() was not
mentioned at all. Add a kerneldoc comment for request_irq() and add
request_threaded_irq() to the list of functions.
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Since the execlists_active() is no longer protected by the
engine->active.lock, we need to protect the request pointer with RCU to
prevent it being freed as we evaluate whether or not we need to preempt.
Fixes: df40306902 ("drm/i915/execlists: Lift process_csb() out of the irq-off spinlock")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191104090158.2959-2-chris@chris-wilson.co.uk
(cherry picked from commit 7d14863525)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit 8eb4704b12)
(cherry picked from commit 7e27238e149ce4f00d9cd801fe3aa0ea55e986a2)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The second paragraph of the content section does not properly
describe how mount points are determined by autofs.
Replace the lines detailing how the determination of these mount
points is "ad hoc" by a short description of the mount map syntax
used by autofs.
Signed-off-by: Jaskaran Singh <jaskaransingh7654321@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Some of the struct definitions now have an autofs packet header.
Reflect these changes by adding a definition of this header and
place it wherever suitable.
Signed-off-by: Jaskaran Singh <jaskaransingh7654321@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Convert autofs.txt to reST.
The following changes abound:
- Introduce reST formatting for headings, lists et al.
- Add an indentation of an 8 space tab wherever suitable, so as
to maintain consistency.
- Remove indentation of the description of the ioctls which are similar
to the AUTOFS_IOC ioctls, as it does not come out quite right in HTML.
- Add an entry for autofs in the index.
Signed-off-by: Jaskaran Singh <jaskaransingh7654321@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Depending on MACH_JZ47xx prevent us from creating a generic kernel that
works on more than one MIPS board. Instead, we just depend on MIPS being
set.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191023174714.14362-3-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Since we broke the ABI by changing the clock, the driver was also
updated to use the regmap provided by the TCU driver.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191023174714.14362-2-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Instead of requesting the "ext" clock and handling the watchdog clock
divider and gating in the watchdog driver, we now request and use the
"wdt" clock that is supplied by the ingenic-timer "TCU" driver.
The major benefit is that the watchdog's clock rate and parent can now
be specified from within devicetree, instead of hardcoded in the driver.
Also, this driver won't poke anymore into the TCU registers to
enable/disable the clock, as this is now handled by the TCU driver.
On the bad side, we break the ABI with devicetree - as we now request a
different clock. In this very specific case it is still okay, as every
Ingenic JZ47xx-based board out there compile the devicetree within the
kernel; so it's still time to push breaking changes, in order to get a
clean devicetree that won't break once it musn't.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Tested-by: Mathieu Malaterre <malat@debian.org>
Tested-by: Artur Rojek <contact@artur-rojek.eu>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191023174714.14362-1-paul@crapouillou.net
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The Atmel sama5d4_wdt needs to be compatible with microchip,sam9x60-wdt
The sama5d4_wdt driver is updated to work with both hardware blocks
(sama5d4/sama5d2 and sam9x60 based blocks)
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1573806579-7981-2-git-send-email-eugen.hristev@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Cleanup the macro definitions to use BIT and align with two spaces.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1573806579-7981-1-git-send-email-eugen.hristev@microchip.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Testing with the new fsstress support for subvolumes uncovered a pretty
bad problem with rename exchange on subvolumes. We're modifying two
different subvolumes, but we only start the transaction on one of them,
so the other one is not added to the dirty root list. This is caught by
btrfs_cow_block() with a warning because the root has not been updated,
however if we do not modify this root again we'll end up pointing at an
invalid root because the root item is never updated.
Fix this by making sure we add the destination root to the trans list,
the same as we do with normal renames. This fixes the corruption.
Fixes: cdd1fedf82 ("btrfs: add support for RENAME_EXCHANGE and RENAME_WHITEOUT")
CC: stable@vger.kernel.org # 4.9+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The device driver data saved the 'struct sprd_wdt' object, it is
incorrect to get 'struct watchdog_device' object from the driver
data, thus fix it.
Fixes: 4776034670 ("watchdog: Add Spreadtrum watchdog driver")
Reported-by: Dongwei Wang <dongwei.wang@unisoc.com>
Signed-off-by: Shuiqing Li <shuiqing.li@unisoc.com>
Signed-off-by: Baolin Wang <baolin.wang@linaro.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/76d4687189ec940baa90cb8d679a8d4c8f02ee80.1573210405.git.baolin.wang@linaro.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The ast2600 no longer uses bit 4 in the control register to indicate a
1MHz clock (It now controls whether this watchdog is reset by a SOC
reset). This means we do not want to set it. It also does not need to be
set for the ast2500, as it is read-only on that SoC.
The comment next to the clock rate selection wandered away from where it
was set, so put it back next to the register setting it's describing.
Fixes: b3528b4874 ("watchdog: aspeed: Add support for AST2600")
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191108032905.22463-1-joel@jms.id.au
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The following hang is observed when a 'reboot' command is issued:
# reboot
# Stopping network: OK
Stopping klogd: OK
Stopping syslogd: OK
umount: devtmpfs busy - remounted read-only
[ 8.612079] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
The system is going down NOW!
Sent SIGTERM to all processes
Sent SIGKILL to all processes
Requesting system reboot
[ 10.694753] reboot: Restarting system
[ 11.699008] Reboot failed -- System halted
Fix this problem by adding a .restart ops member.
Fixes: 41b630f41b ("watchdog: Add i.MX7ULP watchdog support")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-1-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
It can be useful to delay setting the nowayout feature for a watchdog
device. Moreover, not every driver (notably gpio_wdt) implements a
nowayout module parameter/otherwise respects CONFIG_WATCHDOG_NOWAYOUT,
and modifying those drivers carries a risk of causing a regression for
someone who has two watchdog devices, sets CONFIG_WATCHDOG_NOWAYOUT
and somehow relies on the gpio_wdt driver being ignorant of
that (i.e., allowing one to gracefully close a gpio_wdt but not the
other watchdog in the system).
So instead, simply make the nowayout sysfs file writable. Obviously,
setting nowayout is a one-way street.
Signed-off-by: Rasmus Villemoes <linux@rasmusvillemoes.dk>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191105205118.11359-1-linux@rasmusvillemoes.dk
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
When PREEMPT_RT is enabled, all hrtimer expiry functions are
deferred for execution into the context of ksoftirqd unless otherwise
annotated.
Deferring the expiry of the hrtimer used by the watchdog core, however,
is a waste, as the callback does nothing but queue a kthread work item
and wakeup watchdogd.
It's worst then that, too: the deferral through ksoftirqd also means
that for correct behavior a user must adjust the scheduling parameters
of both watchdogd _and_ ksoftirqd, which is unnecessary and has other
side effects (like causing unrelated expiry functions to execute at
potentially elevated priority).
Instead, mark the hrtimer used by the watchdog core as being _HARD to
allow it's execution directly from hardirq context. The work done in
this expiry function is well-bounded and minimal.
A user still must adjust the scheduling parameters of the watchdogd
to be correct w.r.t. their application needs.
Link: https://lkml.kernel.org/r/0e02d8327aeca344096c246713033887bc490dd7.1538089180.git.julia@ni.com
Cc: Guenter Roeck <linux@roeck-us.net>
Reported-and-tested-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reported-by: Tim Sander <tim@krieglstein.org>
Signed-off-by: Julia Cartwright <julia@ni.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
[bigeasy: use only HRTIMER_MODE_REL_HARD]
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191105144506.clyadjbvnn7b7b2m@linutronix.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use definitions instead of magic values in order to improve readability.
Since the CLK field of the WDOG CS register is composed of two bits
to select the watchdog clock source, use a shift representation
instead of BIT().
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-5-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Compiler is smart enough and knows when to inline, so there
is no need to mark some of these functions as 'inline'.
Remove such annotations.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-4-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The 'notifier_block' structure member is unused, so just remove it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-3-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
It is more natural to pass the watchdog instance inside
imx7ulp_wdt_enable() instead of the base address.
This also has the benefit to reduce the code a bit.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191029174037.25381-2-festevam@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The function documentation for the exported ROHM BD70528 WDG control
functions used old argument names. Fix the names.
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191010060733.GA9979@localhost.localdomain
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The struct cdev is embedded in the struct watchdog_core_data. In the
current code, we manage the watchdog_core_data with a kref, but the
cdev is manged by a kobject. There is no any relationship between
this kref and kobject. So it is possible that the watchdog_core_data is
freed before the cdev is entirely released. We can easily get the
following call trace with CONFIG_DEBUG_KOBJECT_RELEASE and
CONFIG_DEBUG_OBJECTS_TIMERS enabled.
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x38
WARNING: CPU: 23 PID: 1028 at lib/debugobjects.c:481 debug_print_object+0xb0/0xf0
Modules linked in: softdog(-) deflate ctr twofish_generic twofish_common camellia_generic serpent_generic blowfish_generic blowfish_common cast5_generic cast_common cmac xcbc af_key sch_fq_codel openvswitch nsh nf_conncount nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4
CPU: 23 PID: 1028 Comm: modprobe Not tainted 5.3.0-next-20190924-yoctodev-standard+ #180
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 00400009 (nzcv daif +PAN -UAO)
pc : debug_print_object+0xb0/0xf0
lr : debug_print_object+0xb0/0xf0
sp : ffff80001cbcfc70
x29: ffff80001cbcfc70 x28: ffff800010ea2128
x27: ffff800010bad000 x26: 0000000000000000
x25: ffff80001103c640 x24: ffff80001107b268
x23: ffff800010bad9e8 x22: ffff800010ea2128
x21: ffff000bc2c62af8 x20: ffff80001103c600
x19: ffff800010e867d8 x18: 0000000000000060
x17: 0000000000000000 x16: 0000000000000000
x15: ffff000bd7240470 x14: 6e6968207473696c
x13: 5f72656d6974203a x12: 6570797420746365
x11: 6a626f2029302065 x10: 7461747320657669
x9 : 7463612820657669 x8 : 3378302f3078302b
x7 : 0000000000001d7a x6 : ffff800010fd5889
x5 : 0000000000000000 x4 : 0000000000000000
x3 : 0000000000000000 x2 : ffff000bff948548
x1 : 276a1c9e1edc2300 x0 : 0000000000000000
Call trace:
debug_print_object+0xb0/0xf0
debug_check_no_obj_freed+0x1e8/0x210
kfree+0x1b8/0x368
watchdog_cdev_unregister+0x88/0xc8
watchdog_dev_unregister+0x38/0x48
watchdog_unregister_device+0xa8/0x100
softdog_exit+0x18/0xfec4 [softdog]
__arm64_sys_delete_module+0x174/0x200
el0_svc_handler+0xd0/0x1c8
el0_svc+0x8/0xc
This is a common issue when using cdev embedded in a struct.
Fortunately, we already have a mechanism to solve this kind of issue.
Please see commit 233ed09d7f ("chardev: add helper function to
register char devs with a struct device") for more detail.
In this patch, we choose to embed the struct device into the
watchdog_core_data, and use the API provided by the commit 233ed09d7f
to make sure that the release of watchdog_core_data and cdev are
in sequence.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20191008112934.29669-1-haokexin@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
... by moving the fall through comment outside of the code block so that
gcc sees it.
No functional changes.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: linux-watchdog@vger.kernel.org
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190929114649.22740-1-bp@alien8.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Normally, the watchdog is disabled when /dev/watchdog is closed, but if
CONFIG_WATCHDOG_NOWAYOUT is defined, then it means that the watchdog should
remain enabled. So we should keep it enabled if CONFIG_WATCHDOG_NOWAYOUT
is defined.
Reported-by: Razvan Becheriu <razvan.becheriu@qualitance.com>
Cc: Ferry Toth <fntoth@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Razvan Becheriu <razvan.becheriu@gmail.com>
Link: https://lore.kernel.org/r/20190924143116.69823-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Use __maybe_unused for power management related functions instead
of #if CONFIG_PM_SLEEP to simply the code.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/1569308828-8320-1-git-send-email-Anson.Huang@nxp.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The watchdog controller on NCT6116D is compatible with NCT6102D.
Extend the support to enable SuperIO based NCT6116D watchdog device.
Signed-off-by: Srikanth Krishnakar <Srikanth_Krishnakar@mentor.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20190918160458.10108-1-Srikanth_Krishnakar@mentor.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Any arm config which has 'CONFIG_MTD_ONENAND_SAMSUNG=m' and
'CONFIG_SERIAL_SAMSUNG=m' gives a build warning:
warning: same module names found:
drivers/tty/serial/samsung.ko
drivers/mtd/nand/onenand/samsung.ko
Rename both drivers/tty/serial/samsung.c to
drivers/tty/serial/samsung_tty.c and drivers/mtd/nand/onenand/samsung.c
drivers/mtd/nand/onenand/samsung_mtd.c to fix the warning.
Signed-off-by: Sudip Mukherjee <sudipm.mukherjee@gmail.com>
Acked-by: Richard Weinberger <richard@nod.at>
Link: https://lore.kernel.org/r/20191117202435.28127-1-sudipm.mukherjee@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
set_page_dirty says:
For pages with a mapping this should be done under the page lock
for the benefit of asynchronous memory errors who prefer a
consistent dirty state. This rule can be broken in some special
cases, but should be better not to.
Under those rules, it is only safe for us to use the plain set_page_dirty
calls for shmemfs/anonymous memory. Userptr may be used with real
mappings and so needs to use the locked version (set_page_dirty_lock).
However, following a try_to_unmap() we may want to remove the userptr and
so call put_pages(). However, try_to_unmap() acquires the page lock and
so we must avoid recursively locking the pages ourselves -- which means
that we cannot safely acquire the lock around set_page_dirty(). Since we
can't be sure of the lock, we have to risk skip dirtying the page, or
else risk calling set_page_dirty() without a lock and so risk fs
corruption.
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=203317
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=112012
Fixes: 5cc9ed4b9a ("drm/i915: Introduce mapping of user pages into video memory (userptr) ioctl")
References: cb6d7c7dc7 ("drm/i915/userptr: Acquire the page lock around set_page_dirty()")
References: 505a8ec7e1 ("Revert "drm/i915/userptr: Acquire the page lock around set_page_dirty()"")
References: 6dcc693bc5 ("ext4: warn when page is dirtied without buffers")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191111133205.11590-1-chris@chris-wilson.co.uk
(cherry picked from commit 0d4bbe3d40)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit cee7fb437e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We report "frequencies" (actual-frequency, requested-frequency) as the
number of accumulated cycles so that the average frequency over that
period may be determined by the user. This means the units we report to
the user are Mcycles (or just M), not MHz.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191109105356.5273-1-chris@chris-wilson.co.uk
(cherry picked from commit e88866ef02)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit a7d87b70d6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The LUTs are single buffered so in order to program them without
tearing we'd have to do it during vblank (actually to be 100%
effective it has to happen between start of vblank and frame start).
We have no proper mechanism for that at the moment so we just
defer loading them after the vblank waits have happened. That
is not quite sufficient (especially when committing multiple pipes
whose vblanks don't line up) so the LUT load will often leak into
the following frame causing tearing.
However in case the hardware wasn't previously using the LUT we
can preload it before setting the enable bit (which is double
buffered so won't tear). Let's determine if we can do such
preloading and make it happen. Slight variation between the
hardware requires some platforms specifics in the checks.
Hans is seeing ugly colored flash on VLV/CHV macchines (GPD win
and Asus T100HA) when the gamma LUT gets loaded for the first
time as the BIOS has left some junk in the LUT memory.
v2: Deal with uapi vs. hw crtc state split
s/GCM/CGM/ typo fix
Cc: Hans de Goede <hdegoede@redhat.com>
Fixes: 051a6d8d3c ("drm/i915: Move LUT programming to happen after vblank waits")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191030190815.7359-1-ville.syrjala@linux.intel.com
Tested-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
(cherry picked from commit 0ccc42a2fd)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit f77021372e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Make sure we have a crtc before probing its primary plane's
max stride. Initially I thought we can't get this far without
crtcs, but looks like we can via the dumb_create ioctl.
Not sure if we shouldn't disable dumb buffer support entirely
when we have no crtcs, but that would require some amount of work
as the only thing currently being checked is dev->driver->dumb_create
which we'd have to convert to some device specific dynamic thing.
Cc: stable@vger.kernel.org
Reported-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Fixes: aa5ca8b742 ("drm/i915: Align dumb buffer stride to 4k to allow for gtt remapping")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20191106172349.11987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
(cherry picked from commit baea9ffe64)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit aeec766133)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
When doing a device replace, while at scrub.c:scrub_enumerate_chunks(), we
set the block group to RO mode and then wait for any ongoing writes into
extents of the block group to complete. While doing that wait we overwrite
the value of the variable 'ret' and can break out of the loop if an error
happens without turning the block group back into RW mode. So what happens
is the following:
1) btrfs_inc_block_group_ro() returns 0, meaning it set the block group
to RO mode (its ->ro field set to 1 or incremented to some value > 1);
2) Then btrfs_wait_ordered_roots() returns a value > 0;
3) Then if either joining or committing the transaction fails, we break
out of the loop wihtout calling btrfs_dec_block_group_ro(), leaving
the block group in RO mode forever.
To fix this, just remove the code that waits for ongoing writes to extents
of the block group, since it's not needed because in the initial setup
phase of a device replace operation, before starting to find all chunks
and their extents, we set the target device for replace while holding
fs_info->dev_replace->rwsem, which ensures that after releasing that
semaphore, any writes into the source device are made to the target device
as well (__btrfs_map_block() guarantees that). So while at
scrub_enumerate_chunks() we only need to worry about finding and copying
extents (from the source device to the target device) that were written
before we started the device replace operation.
Fixes: f0e9b7d640 ("Btrfs: fix race setting block group readonly during device replace")
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
