Pull on for-linus to resolve what otherwise would have been a conflict
with the cgroups rstat patchset from Tejun.
* for-linus: (942 commits)
blkcg: make blkcg_print_stat() print stats only for online blkgs
nvme: change nvme_passthru_cmd64 to explicitly mark rsvd
nvme-multipath: fix crash in nvme_mpath_clear_ctrl_paths
nvme-rdma: fix a segmentation fault during module unload
iocost: don't nest spin_lock_irq in ioc_weight_write()
io_uring: ensure we clear io_kiocb->result before each issue
um-ubd: Entrust re-queue to the upper layers
nvme-multipath: remove unused groups_only mode in ana log
nvme-multipath: fix possible io hang after ctrl reconnect
io_uring: don't touch ctx in setup after ring fd install
io_uring: Fix leaked shadow_req
Linux 5.4-rc5
riscv: cleanup do_trap_break
nbd: verify socket is supported during setup
ata: libahci_platform: Fix regulator_get_optional() misuse
nbd: handle racing with error'ed out commands
nbd: protect cmd->status with cmd->lock
io_uring: fix bad inflight accounting for SETUP_IOPOLL|SETUP_SQTHREAD
io_uring: used cached copies of sq->dropped and cq->overflow
ARM: dts: stm32: relax qspi pins slew-rate for stm32mp157
...
We expect 64-bit calculation result from below statement, however
in 32-bit machine, looped left shift operation on pgoff_t type
variable may cause overflow issue, fix it by forcing type cast.
page->index << PAGE_SHIFT;
Fixes: 26de9b1171 ("f2fs: avoid unnecessary updating inode during fsync")
Fixes: 0a2aa8fbb9 ("f2fs: refactor __exchange_data_block for speed up")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
As Eric reported:
RENAME_EXCHANGE support was just added to fsstress in xfstests:
commit 65dfd40a97b6bbbd2a22538977bab355c5bc0f06
Author: kaixuxia <xiakaixu1987@gmail.com>
Date: Thu Oct 31 14:41:48 2019 +0800
fsstress: add EXCHANGE renameat2 support
This is causing xfstest generic/579 to fail due to fsck.f2fs reporting errors.
I'm not sure what the problem is, but it still happens even with all the
fs-verity stuff in the test commented out, so that the test just runs fsstress.
generic/579 23s ... [10:02:25]
[ 7.745370] run fstests generic/579 at 2019-11-04 10:02:25
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
(see /results/f2fs/results-default/generic/579.full for details)
[10:02:47]
Ran: generic/579
Failures: generic/579
Failed 1 of 1 tests
Xunit report: /results/f2fs/results-default/result.xml
Here's the contents of 579.full:
_check_generic_filesystem: filesystem on /dev/vdc is inconsistent
*** fsck.f2fs output ***
[ASSERT] (__chk_dots_dentries:1378) --> Bad inode number[0x24] for '..', parent parent ino is [0xd10]
The root cause is that we forgot to update directory's i_pino during
cross_rename, fix it.
Fixes: 32f9bc25cb ("f2fs: support ->rename2()")
Signed-off-by: Chao Yu <yuchao0@huawei.com>
Tested-by: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch adds array support to btf_struct_access().
It supports array of int, array of struct and multidimensional
array.
It also allows using u8[] as a scratch space. For example,
it allows access the "char cb[48]" with size larger than
the array's element "char". Another potential use case is
"u64 icsk_ca_priv[]" in the tcp congestion control.
btf_resolve_size() is added to resolve the size of any type.
It will follow the modifier if there is any. Please
see the function comment for details.
This patch also adds the "off < moff" check at the beginning
of the for loop. It is to reject cases when "off" is pointing
to a "hole" in a struct.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20191107180903.4097702-1-kafai@fb.com
Now that io-wq supports separating the two request lifetime types, mark
the following IO as having unbounded runtimes:
- Any read/write to a non-regular file
- Any specific networked IO
- Any poll command
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Rahul Lakkireddy says:
====================
cxgb4: add support for TC-MQPRIO Qdisc Offload
This series of patches add support for offloading TC-MQPRIO Qdisc
to Chelsio T5/T6 NICs. Offloading QoS traffic shaping and pacing
requires using Ethernet Offload (ETHOFLD) resources available on
Chelsio NICs. The ETHOFLD resources are configured by firmware
and taken from the resource pool shared with other Chelsio Upper
Layer Drivers. Traffic flowing through ETHOFLD region requires a
software netdev Tx queue (EOSW_TXQ) exposed to networking stack,
and an underlying hardware Tx queue (EOHW_TXQ) used for sending
packets through hardware.
ETHOFLD region is addressed using EOTIDs, which are per-connection
resource. Hence, EOTIDs are capable of storing only a very small
number of packets in flight. To allow more connections to share
the the QoS rate limiting configuration, multiple EOTIDs must be
allocated to reduce packet drops. EOTIDs are 1-to-1 mapped with
software EOSW_TXQ. Several software EOSW_TXQs can post packets to
a single hardware EOHW_TXQ.
The series is broken down as follows:
Patch 1 queries firmware for maximum available traffic classes,
as well as, start and maximum available indices (EOTID) into ETHOFLD
region, supported by the underlying device.
Patch 2 reworks queue configuration and simplifies MSI-X allocation
logic in preparation for ETHOFLD queues support.
Patch 3 adds skeleton for validating and configuring TC-MQPRIO Qdisc
offload. Also, adds support for software EOSW_TXQs and exposes them
to network stack. Updates Tx queue selection to use fallback NIC Tx
path for unsupported traffic that can't go through ETHOFLD queues.
Patch 4 adds support for managing hardware queues to rate limit
traffic flowing through them. The queues are allocated/removed based
on enabling/disabling TC-MQPRIO Qdisc offload, respectively.
Patch 5 adds Tx path for traffic flowing through software EOSW_TXQ
and EOHW_TXQ. Also, adds Rx path to handle Tx completions.
Patch 6 updates exisiting SCHED API to configure FLOWC based QoS
offload. In the existing QUEUE based rate limiting, multiple queues
sharing a traffic class get the aggreagated max rate limit value.
On the other hand, in FLOWC based rate limiting, multiple queues
sharing a traffic class get their own individual max rate limit
value. For example, if 2 queues are bound to class 0, which is rate
limited to 1 Gbps, then in QUEUE based rate limiting, both the
queues get the aggregate max output of 1 Gbps only. In FLOWC based
rate limiting, each queue gets its own output of max 1 Gbps each;
i.e. 2 queues * 1 Gbps rate limit = 2 Gbps max output.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Rework SCHED API to allow offloading TC-MQPRIO QoS configuration.
The existing QUEUE based rate limiting throttles all queues sharing
a traffic class, to the specified max rate limit value. So, if
multiple queues share a traffic class, then all the queues get
the aggregate specified max rate limit.
So, introduce the new FLOWC based rate limiting, where multiple
queues can share a traffic class with each queue getting its own
individual specified max rate limit.
For example, if 2 queues are bound to class 0, which is rate limited
to 1 Gbps, then 2 queues using QUEUE based rate limiting, get the
aggregate output of 1 Gbps only. In FLOWC based rate limiting, each
queue gets its own output of max 1 Gbps each; i.e. 2 queues * 1 Gbps
rate limit = 2 Gbps.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement Tx path for traffic flowing through software EOSW_TXQ
and EOHW_TXQ. Since multiple EOSW_TXQ can post packets to a single
EOHW_TXQ, protect the hardware queue with necessary spinlock. Also,
move common code used to generate TSO work request to a common
function.
Implement Rx path to handle Tx completions for successfully
transmitted packets.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for configuring and managing ETHOFLD hardware queues.
Keep the queue count and MSI-X allocation scheme same as NIC queues.
ETHOFLD hardware queues are dynamically allocated/destroyed as
TC-MQPRIO Qdisc offload is enabled/disabled on the corresponding
interface, respectively.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add logic for validation and configuration of TC-MQPRIO Qdisc
offload. Also, add support to manage EOSW_TXQ, which have 1-to-1
mapping with EOTIDs, and expose them to network stack.
Move common skb validation in Tx path to a separate function and
add minimal Tx path for ETHOFLD. Update Tx queue selection to return
normal NIC Txq to send traffic pattern that can't go through ETHOFLD
Tx path.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Simplify queue configuration and MSI-X allocation logic. Use a single
MSI-X information table for both NIC and ULDs. Remove hard-coded
MSI-X indices for firmware event queue and non data interrupts.
Instead, use the MSI-X bitmap to obtain a free MSI-X index
dynamically. Save each Rxq's index into the MSI-X information table,
within the Rxq structures themselves, for easier cleanup.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
QoS offload needs Ethernet Offload (ETHOFLD) resources present in the
NIC. These resources are shared with other ULDs. So, query firmware
for the available number of traffic classes, as well as, start and
end indices (EOTID) of the ETHOFLD region.
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
io_uring supports request types that basically have two different
lifetimes:
1) Bounded completion time. These are requests like disk reads or writes,
which we know will finish in a finite amount of time.
2) Unbounded completion time. These are generally networked IO, where we
have no idea how long they will take to complete. Another example is
POLL commands.
This patch provides support for io-wq to handle these differently, so we
don't starve bounded requests by tying up workers for too long. By default
all work is bounded, unless otherwise specified in the work item.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We hold the wqe lock at this point (which is also annotated), so there's
no need to use the careful variant of list_empty().
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Currently we drop completion events, if the CQ ring is full. That's fine
for requests with bounded completion times, but it may make it harder or
impossible to use io_uring with networked IO where request completion
times are generally unbounded. Or with POLL, for example, which is also
unbounded.
After this patch, we never overflow the ring, we simply store requests
in a backlog for later flushing. This flushing is done automatically by
the kernel. To prevent the backlog from growing indefinitely, if the
backlog is non-empty, we apply back pressure on IO submissions. Any
attempt to submit new IO with a non-empty backlog will get an -EBUSY
return from the kernel. This is a signal to the application that it has
backlogged CQ events, and that it must reap those before being allowed
to submit more IO.
Note that if we do return -EBUSY, we will have filled whatever
backlogged events into the CQ ring first, if there's room. This means
the application can safely reap events WITHOUT entering the kernel and
waiting for them, they are already available in the CQ ring.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This is in preparation for handling CQ ring overflow a bit smarter. We
should not have any functional changes in this patch. Most of the
changes are fairly straight forward, the only ones that stick out a bit
are the ones that change __io_free_req() to take the reference count
into account. If the request hasn't been submitted yet, we know it's
safe to simply ignore references and free it. But let's clean these up
too, as later patches will depend on the caller doing the right thing if
the completion logging grabs a reference to the request.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
The rings can be derived from the ctx, and we need the ctx there for
a future change.
No functional changes in this patch.
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
While we have support for generic timeouts, we don't have a way to tie
a timeout to a specific SQE. The generic timeouts simply trigger wakeups
on the CQ ring.
This adds support for IORING_OP_LINK_TIMEOUT. This command is only valid
as a link to a previous command. The timeout specific can be either
relative or absolute, following the same rules as IORING_OP_TIMEOUT. If
the timeout triggers before the dependent command completes, it will
attempt to cancel that command. Likewise, if the dependent command
completes before the timeout triggers, it will cancel the timeout.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We're going to need this helper in a future patch, so move it out
of io_async_cancel() and into its own separate function.
No functional changes in this patch.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This patch supports 2MB-aligned pinned file, which can guarantee no GC at all
by allocating fully valid 2MB segment.
Check free segments by has_not_enough_free_secs() with large budget.
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
If someone requests fscache on the mount, and the kernel doesn't
support it, it should fail the mount.
[ Drop ceph prefix -- it's provided by pr_err. ]
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Since the tool now adds support for another Intel SST implementation,
increment version number.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Some firmware implementation gives error when a command is sent get mask
for core count 32-61. So use core count to decide.
But there is no function to get core count. So introduce one function to
get core count.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There are some platforms, where there limited support of Intel(R) SST
features. Here perf-profile has only one base configuration and limited
support of commands. But still has support for discovery of base-freq and
turbo-freq features. So it is important to show minimum features to use
base-freq and turbo-freq features.
Here the change are:
- When there is no support of CONFIG_TDP_GET_LEVELS_INFO, then instead
of treating this as fatal error, treat this with number of config levels
= 0, that means only base level 0 is present.
- There is no support of mail box commands to get base frequencies or
turbo frequencies. Here present base frequency by reading cpufreq
base freq and turbo frequency by reading MSR 0x1AD.
- Don't display any field, which has value == 0.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use different frequency weights for CLOS 0 and and CLOS1-3, to define
relative priority for power budgeting. This will be used for --auto
mode to enable base-freq and turbo-freq feature.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
To be consistant with the other frequency units, change the CLOS
unit to MHz instead of ratios.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Use mailbox to read/write CLOS_PM_QOS_CONFIG instead of read/write to
MMIO offset.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
There is an expectation in the CLX platform for SST base-freq feature that
Scaling min frequency be different for high and low priority cores.
This is the way the firmware will understand the priority.
So this change will look at high priority and low priority cores, and set
scaling_min_freq to P1High for high priority cores and P1Low to low
priority cores.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
In CLX_N base_frequency is read from cpufreq sysfs, where units are in
KHz. The internal units in the code matches the real ratios which are
in 100MHz scale. So when storing units for CLX-N frequencies, convert
to 100MHz scale.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Make the avx level display consistent. Except for "turbo-ratio-limits-avx",
everywhere else it is avx2. So change "turbo-ratio-limits-avx"
to "turbo-ratio-limits-avx2".
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Add support for uncore P0, uncore P1, P1 for base and AVX levels and
memory frequency. These commands are optional, so continue on
failure.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
When building with Clang + -Wtautological-constant-compare:
drivers/md/dm-raid.c:619:8: warning: converting the result of '<<' to a
boolean always evaluates to true [-Wtautological-constant-compare]
r = !RAID10_OFFSET;
^
drivers/md/dm-raid.c:517:28: note: expanded from macro 'RAID10_OFFSET'
#define RAID10_OFFSET (1 << 16) /* stripes with data
copies area adjacent on devices */
^
1 warning generated.
Negating a non-zero number will always make it zero, which is the
default value of r in this function so this statement is unnecessary;
remove it so that clang no longer warns.
Link: https://github.com/ClangBuiltLinux/linux/issues/753
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
We can just call dma_free_contiguous directly instead of wrapping it.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Max Filippov <jcmvbkbc@gmail.com>
The timers are canceled from an preempt-notifier which is invoked with
disabled preemption which is not allowed on PREEMPT_RT.
The timer callback is short so in could be invoked in hard-IRQ context
on -RT.
Let the timer expire on hard-IRQ context even on -RT.
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Tested-by: Julien Grall <julien.grall@arm.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20191107095424.16647-1-bigeasy@linutronix.de
It's not necessary to adjust the task state and revisit the state
of source and destination cgroups if the cgroups are not in freeze
state and the task itself is not frozen.
And in this scenario, it wakes up the task who's not supposed to be
ready to run.
Don't do the unnecessary task state adjustment can help stop waking
up the task without a reason.
Signed-off-by: Honglei Wang <honglei.wang@oracle.com>
Acked-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fix to return negative error code -ENOMEM from the error handling
case instead of 0, as done elsewhere in this function.
Fixes: df4028658f ("staging: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20191106115954.114678-1-weiyongjun1@huawei.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently the pointer dentry is being dereferenced before it is
being null checked. Fix this by only dereferencing dentry once
we know it is not null.
Addresses-Coverity: ("Dereference before null check")
Fixes: df4028658f ("staging: Add VirtualBox guest shared folder (vboxsf) support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20191105175108.79824-1-colin.king@canonical.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
On architectures where loff_t is wider than pgoff_t, the expression
((page->index + 1) << PAGE_SHIFT) can overflow. Rewrite to use the page
offset, which we already compute here anyway.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
It could be confusing to return 1 on success and 0 on error
given the style elswhere.
Signed-off-by: Marcelo Diop-Gonzalez <marcgonzalez@google.com>
Link: https://lore.kernel.org/r/20191105222756.25369-1-marcgonzalez@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch removes the constraint that user space data has to be terminated
with a new line character. It is needed to let the user choose how the data
is formatted.
Signed-off-by: Christian Gromm <christian.gromm@microchip.com>
Link: https://lore.kernel.org/r/1573138169-27562-1-git-send-email-christian.gromm@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Replaces VCHIQ_INSTANCE_T typedef with struct vchiq_instance to match
kernel code style. Issue found by checkpatch.
Additionally, as part of the process renames "struct vchiq_instance_struct" to "struct vchiq_instance".
Signed-off-by: Jamal Shareef <jamal.k.shareef@gmail.com>
Link: https://lore.kernel.org/r/ed2b3076f93a920149716687b48e0c5e3ddf0569.1572994235.git.jamal.k.shareef@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
