There are a bunch of GPIO muxing data, but most of them are actually
unneeded because GPIO-to-pin mapping can be specified by "gpio-ranges"
DT properties.
Tables that contain a set of GPIO pins are still needed for the named
mapping by "gpio-ranges-group-names". This is a much cleaner way for
UniPhier SoC family where GPIO numbers are not straight mapped to pin
numbers.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
For LD11/LD20 SoCs (capable of per-pin input enable), iectrl bits are
located across multiple registers. So, the register offset must be
taken into account. Otherwise, wrong input-enable status is displayed.
While we here, rename the macro because it is a base address.
Fixes: aa543888ca ("pinctrl: uniphier: support per-pin input enable for new SoCs")
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
All UniPhier pinctrl drivers are built-in. Exporting the symbol
is meaningless.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into other structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
13129 2808 192 16129 3f01 drivers/pinctrl/qcom/pinctrl-msm.o
after:
text data bss dec hex filename
12839 2720 192 15751 3d87 drivers/pinctrl/qcom/pinctrl-msm.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into other structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
17061 6992 0 24053 5df5 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o
after:
text data bss dec hex filename
16777 6904 0 23681 5c81 drivers/pinctrl/qcom/pinctrl-ssbi-gpio.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into another structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
12775 3696 64 16535 4097 drivers/pinctrl/pinctrl-coh901.o
after:
bss dec hex filename
12440 3640 64 16144 3f10 drivers/pinctrl/pinctrl-coh901.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into another structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
17545 5376 0 22921 5989 drivers/pinctrl/nomadik/pinctrl-abx500.o
after:
bss dec hex filename
17273 5320 0 22593 5841 drivers/pinctrl/nomadik/pinctrl-abx500.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into other structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
7754 2328 0 10082 2762 drivers/pinctrl/vt8500/pinctrl-wmt.o
after:
text data bss dec hex filename
7472 2272 0 9744 2610 drivers/pinctrl/vt8500/pinctrl-wmt.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This structure is only used to copy into other structure, so declare
it as const.
This issue was detected using Coccinelle and the following semantic patch:
@r disable optional_qualifier@
identifier i;
position p;
@@
static struct gpio_chip i@p = { ... };
@ok@
identifier r.i;
expression e;
position p;
@@
e = i@p;
@bad@
position p != {r.p,ok.p};
identifier r.i;
struct gpio_chip e;
@@
e@i@p
@depends on !bad disable optional_qualifier@
identifier r.i;
@@
static
+const
struct gpio_chip i = { ... };
In the following log you can see a significant difference in the code size
and data segment, hence in the dec segment. This log is the output
of the size command, before and after the code change:
before:
text data bss dec hex filename
11866 3520 128 15514 3c9a drivers/pinctrl/pinctrl-rza1.o
after:
text data bss dec hex filename
11539 3464 128 15131 3b1b drivers/pinctrl/pinctrl-rza1.o
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
The I2C pin functions in R_PIO used to be named "s_twi".
As we usually use the name "i2c" instead of "twi" in the mainline
kernel, change these names to "s_i2c" for consistency.
The "s_twi" functions are not yet referenced by any device trees in
mainline kernel so I think it's safe to change the name.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
R40 is said to be an upgrade of A20, and its pin configuration is also
similar to A20 (and thus similar to A10).
Add support for R40 to the A10 pinctrl driver.
Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
GPIO_PULL bits configurations in TLMM_GPIO_CFG register
differs for IPQ40xx from rest of the other qcom SoCs.
As it does not support the keeper state and therefore can't
support bias-bus-hold property.
This patch adds a pull_no_keeper setting which configures the
msm_gpio_pull bits for ipq40xx. This is required to fix the
proper configurations of gpio-pull bits for nand pins mux.
IPQ40xx SoC:
2'b10: Internal pull up enable.
2'b11: Unsupport
For other SoC's:
2'b10: Keeper
2'b11: Pull-Up
Note: Due to pull_no_keeper length, all kerneldoc entries
in the msm_pinctrl_soc_data struct had to be realigned.
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This patch adds multiple pinctrl functions and mappings
for SDIO, NAND, I2S, WIFI, PCIE, LEDs, etc... that have
been missing from the current minimal version.
This patch has been updated from the original version
that was posted by Ram Chandra Jangir on the LEDE-DEV ML:
<https://patchwork.ozlabs.org/patch/752962/>. A short
summary of the changes are documented in the device-tree
patch of this series:
"dt-bindings: pinctrl: add most other IPQ4019 pin functions and groups"
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Ram Chandra Jangir <rjangir@codeaurora.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Acked-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Here are 3 firmware core fixes for 4.13-rc5.
All three of these fix reported issues and have been floating around for
a few weeks. They have been in linux-next with no reported problems.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+z8w8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+yngsgCeJQzYKjLyfY1QXhhjLY2Xy/ufFYIAoM2WafSL
7OnYFrt2s2VWPp3jEY9a
=XEz8
-----END PGP SIGNATURE-----
Merge tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core
Pull driver core fixes from Greg KH:
"Here are three firmware core fixes for 4.13-rc5.
All three of these fix reported issues and have been floating around
for a few weeks. They have been in linux-next with no reported
problems"
* tag 'driver-core-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
firmware: avoid invalid fallback aborts by using killable wait
firmware: fix batched requests - send wake up on failure on direct lookups
firmware: fix batched requests - wake all waiters
Here are two patches for 4.13-rc5.
One is a fix for a reported thunderbolt issue, and the other a fix for
an MEI driver issue. Both have been in linux-next with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+zfg8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynOKQCfYPp20/4S/DRl/O9mtFG6+Iczmm8AnAnFUVrN
EHmUF2ipsm4FQ4iZSot3
=yLZO
-----END PGP SIGNATURE-----
Merge tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fixes from Greg KH:
"Here are two patches for 4.13-rc5.
One is a fix for a reported thunderbolt issue, and the other a fix for
an MEI driver issue. Both have been in linux-next with no reported
issues"
* tag 'char-misc-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
thunderbolt: Do not enumerate more ports from DROM than the controller has
mei: exclude device from suspend direct complete optimization
Here are two tty serial driver fixes for 4.13-rc5. One is a revert of a
-rc1 patch that turned out to not be a good idea, and the other is a fix
for the pl011 serial driver.
Both have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+1vw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykreACeLI2spfagnOcnW264PGHxLMgj47EAn0JPSNIg
5FLEtVsgxMuc8kc4LkDb
=58g+
-----END PGP SIGNATURE-----
Merge tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg KH:
"Here are two tty serial driver fixes for 4.13-rc5. One is a revert of
a -rc1 patch that turned out to not be a good idea, and the other is a
fix for the pl011 serial driver.
Both have been in linux-next with no reported issues"
* tag 'tty-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
Revert "serial: Delete dead code for CIR serial ports"
tty: pl011: fix initialization order of QDF2400 E44
Here are some Staging and IIO driver fixes for 4.13-rc5.
Nothing major, just a number of small fixes for reported issues. All of
these have been in linux-next for a while now with no reported issues.
Full details are in the shortlog.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+0+A8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ykwSgCgzvxKfEcAHXOxB90/bHl3yWh+Xe0AoNRX5xEX
gavfFbhZlrPqtlZGX1ZI
=NmcC
-----END PGP SIGNATURE-----
Merge tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging/iio fixes from Greg KH:
"Here are some Staging and IIO driver fixes for 4.13-rc5.
Nothing major, just a number of small fixes for reported issues. All
of these have been in linux-next for a while now with no reported
issues. Full details are in the shortlog"
* tag 'staging-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: comedi: comedi_fops: do not call blocking ops when !TASK_RUNNING
iio: aspeed-adc: wait for initial sequence.
iio: accel: bmc150: Always restore device to normal mode after suspend-resume
staging:iio:resolver:ad2s1210 fix negative IIO_ANGL_VEL read
iio: adc: axp288: Fix the GPADC pin reading often wrongly returning 0
iio: adc: vf610_adc: Fix VALT selection value for REFSEL bits
iio: accel: st_accel: add SPI-3wire support
iio: adc: Revert "axp288: Drop bogus AXP288_ADC_TS_PIN_CTRL register modifications"
iio: adc: sun4i-gpadc-iio: fix unbalanced irq enable/disable
iio: pressure: st_pressure_core: disable multiread by default for LPS22HB
iio: light: tsl2563: use correct event code
Here are a number of small USB driver fixes and new device ids for
4.13-rc5. There is the usual gadget driver fixes, some new quirks for
"messy" hardware, and some new device ids.
All have been in linux-next with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCWY+2eA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ynSGACgrMjsqOsgjgVEnc1IdjS2gHEZnfcAoMmyBGwo
cNOM+8gnysJLFUTwkppl
=+bPU
-----END PGP SIGNATURE-----
Merge tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are a number of small USB driver fixes and new device ids for
4.13-rc5. There is the usual gadget driver fixes, some new quirks for
"messy" hardware, and some new device ids.
All have been in linux-next with no reported issues"
* tag 'usb-4.13-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: pl2303: add new ATEN device id
usb: quirks: Add no-lpm quirk for Moshi USB to Ethernet Adapter
USB: Check for dropped connection before switching to full speed
usb:xhci:Add quirk for Certain failing HP keyboard on reset after resume
usb: renesas_usbhs: gadget: fix unused-but-set-variable warning
usb: renesas_usbhs: Fix UGCTRL2 value for R-Car Gen3
usb: phy: phy-msm-usb: Fix usage of devm_regulator_bulk_get()
usb: gadget: udc: renesas_usb3: Fix usb_gadget_giveback_request() calling
usb: dwc3: gadget: Correct ISOC DATA PIDs for short packets
USB: serial: option: add D-Link DWM-222 device ID
usb: musb: fix tx fifo flush handling again
usb: core: unlink urbs from the tail of the endpoint's urb_list
usb-storage: fix deadlock involving host lock and scsi_done
uas: Add US_FL_IGNORE_RESIDUE for Initio Corporation INIC-3069
USB: hcd: Mark secondary HCD as dead if the primary one died
USB: serial: cp210x: add support for Qivicon USB ZigBee dongle
An mtdblock regression occurred in -rc1 (all writes were broken!), in the
process of some block subsystem refactoring. Noticed and fixed last week, but
I'm a little slow on the uptake.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=RDXe
-----END PGP SIGNATURE-----
Merge tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd
Pull another MTD fix from Brian Norris:
"An mtdblock regression occurred in -rc1 (all writes were broken!), in
the process of some block subsystem refactoring. Noticed and fixed
last week, but I'm a little slow on the uptake"
* tag 'for-linus-20170812' of git://git.infradead.org/linux-mtd:
mtd: blkdevs: Fix mtd block write failure
All the MTD block write requests are failing with
following error messages
mkfs.ext4 /dev/mtdblock0
print_req_error: I/O error, dev mtdblock0, sector 0
Buffer I/O error on dev mtdblock0, logical block 0,
lost async page write
The control is going to default case after block write request
because of missing return.
Fixes: commit 2a842acab1 ("block: introduce new block status code type")
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABAgAGBQJZjs9BAAoJELDendYovxMvXXAH/j3pdoshQbflSUBsDAkybhv5
BVe7+bhtwnoawcjCpXq27SMY3qG/YWnATW28XjxBCoe3t7StNcJr5QGXTWMnTjwN
f/YA0aqtCoLp9JhovTi9WTTCf1/I9CKYFBdCaAmLkDeMudyifZkbXiDbDe0UZmAc
UJt0Jx8KrdMGkuRVp92049calluv+PDHO7gUpGpzoHDJ0IXc1cH9caHTbL+LhioY
o0qqQOz9FnJQIvqSGYRkjXudmGwHYCr61yXvWhwqa4PE3Tzss2ckGtzZPLI8s1QN
p5m01FbIMQKjLbwpQZaRWmGxSzY2vYxf/TShK8eIsBfRYxsR4d7cXULC2vIJGFI=
=jiAk
-----END PGP SIGNATURE-----
Merge tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip
Pull xen fixes from Juergen Gross:
"Some fixes for Xen:
- a fix for a regression introduced in 4.13 for a Xen HVM-guest
configured with KASLR
- a fix for a possible deadlock in the xenbus driver when booting the
system
- a fix for lost interrupts in Xen guests"
* tag 'for-linus-4.13b-rc5-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
xen/events: Fix interrupt lost during irq_disable and irq_enable
xen: avoid deadlock in xenbus
xen: fix hvm guest with kaslr enabled
xen: split up xen_hvm_init_shared_info()
x86: provide an init_mem_mapping hypervisor hook
Pull block fixes from Jens Axboe:
"A set of fixes that should go into this series. This contains:
- Fix from Bart for blk-mq requeue queue running, preventing a
continued loop of run/restart.
- Fix for a bio/blk-integrity issue, in two parts. One from
Christoph, fixing where verification happens, and one from Milan,
for a NULL profile.
- NVMe pull request, most of the changes being for nvme-fc, but also
a few trivial core/pci fixes"
* 'for-linus' of git://git.kernel.dk/linux-block:
nvme: fix directive command numd calculation
nvme: fix nvme reset command timeout handling
nvme-pci: fix CMB sysfs file removal in reset path
lpfc: support nvmet_fc defer_rcv callback
nvmet_fc: add defer_req callback for deferment of cmd buffer return
nvme: strip trailing 0-bytes in wwid_show
block: Make blk_mq_delay_kick_requeue_list() rerun the queue at a quiet time
bio-integrity: only verify integrity on the lowest stacked driver
bio-integrity: Fix regression if profile verify_fn is NULL
All fixes for code that went in this cycle.
- A revert of an optimisation to the syscall exit path, which could lead to an
oops on either older machines or machines with > 1T of memory.
- Disable some deep idle states if the firmware configuration for them fails.
- Re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig change.
- Six fairly small patches fixing bugs in our new watchdog code.
Thanks to:
Gautham R. Shenoy, Nicholas Piggin.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=Vy1K
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"All fixes for code that went in this cycle.
- a revert of an optimisation to the syscall exit path, which could
lead to an oops on either older machines or machines with > 1TB of
memory
- disable some deep idle states if the firmware configuration for
them fails
- re-enable HARD/SOFT lockup detectors in defconfigs after a Kconfig
change
- six fairly small patches fixing bugs in our new watchdog code
Thanks to: Gautham R Shenoy, Nicholas Piggin"
* tag 'powerpc-4.13-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/watchdog: add locking around init/exit functions
powerpc/watchdog: Fix marking of stuck CPUs
powerpc/watchdog: Fix final-check recovered case
powerpc/watchdog: Moderate touch_nmi_watchdog overhead
powerpc/watchdog: Improve watchdog lock primitive
powerpc: NMI IPI improve lock primitive
powerpc/configs: Re-enable HARD/SOFT lockup detectors
powerpc/powernv/idle: Disable LOSE_FULL_CONTEXT states when stop-api fails
Revert "powerpc/64: Avoid restore_math call if possible in syscall exit"
Commit c54451a "iommu/arm-smmu: Fix the error path in arm_smmu_add_device"
removed fwspec assignment in legacy_binding path as redundant which is
wrong. It needs to be updated after fwspec initialisation in
arm_smmu_register_legacy_master() as it is dereferenced later. Without
this there is a NULL-pointer dereference panic during boot on some hosts.
Signed-off-by: Artem Savkov <asavkov@redhat.com>
Reviewed-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Here is a device has xen-pirq-MSI interrupt. Dom0 might lost interrupt
during driver irq_disable/irq_enable. Here is the scenario,
1. irq_disable -> disable_dynirq -> mask_evtchn(irq channel)
2. dev interrupt raised by HW and Xen mark its evtchn as pending
3. irq_enable -> startup_pirq -> eoi_pirq ->
clear_evtchn(channel of irq) -> clear pending status
4. consume_one_event process the irq event without pending bit assert
which result in interrupt lost once
5. No HW interrupt raising anymore.
Now use enable_dynirq for enable_pirq of xen_pirq_chip to remove
eoi_pirq when irq_enable.
Signed-off-by: Liu Shuo <shuo.a.liu@intel.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
When starting the xenwatch thread a theoretical deadlock situation is
possible:
xs_init() contains:
task = kthread_run(xenwatch_thread, NULL, "xenwatch");
if (IS_ERR(task))
return PTR_ERR(task);
xenwatch_pid = task->pid;
And xenwatch_thread() does:
mutex_lock(&xenwatch_mutex);
...
event->handle->callback();
...
mutex_unlock(&xenwatch_mutex);
The callback could call unregister_xenbus_watch() which does:
...
if (current->pid != xenwatch_pid)
mutex_lock(&xenwatch_mutex);
...
In case a watch is firing before xenwatch_pid could be set and the
callback of that watch unregisters a watch, then a self-deadlock would
occur.
Avoid this by setting xenwatch_pid in xenwatch_thread().
Signed-off-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Boris Ostrovsky <boris.ostrovsky@oracle.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
-----BEGIN PGP SIGNATURE-----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=rjAR
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Nothing too earth shattering here, it just seems like lots of little
things all over the place.
msm has probably the larger amount of changes, but they all seem fine,
otherwise, some rockchip, i915, etnaviv and exynos fixes, along with
one nouveau regression fix for some older GPUs"
* tag 'drm-fixes-for-v4.13-rc5' of git://people.freedesktop.org/~airlied/linux: (35 commits)
drm/nouveau/disp/nv04: avoid creation of output paths
drm: make DRM_STM default n
drm/exynos: forbid creating framebuffers from too small GEM buffers
drm/etnaviv: Fix off-by-one error in reloc checking
drm/i915: fix backlight invert for non-zero minimum brightness
drm/i915/shrinker: Wrap need_resched() inside preempt-disable
drm/i915/perf: fix flex eu registers programming
drm/i915: Fix out-of-bounds array access in bdw_load_gamma_lut
drm/i915/gvt: Change the max length of mmio_reg_rw from 4 to 8
drm/i915/gvt: Initialize MMIO Block with HW state
drm/rockchip: vop: report error when check resource error
drm/rockchip: vop: round_up pitches to word align
drm/rockchip: vop: fix NV12 video display error
drm/rockchip: vop: fix iommu page fault when resume
drm/i915/gvt: clean workload queue if error happened
drm/i915/gvt: change resetting to resetting_eng
drm/msm: gpu: don't abuse dma_alloc for non-DMA allocations
drm/msm: gpu: call qcom_mdt interfaces only for ARCH_QCOM
drm/msm/adreno: Prevent unclocked access when retrieving timestamps
drm/msm: Remove __user from __u64 data types
...
Merge misc fixes from Andrew Morton:
"21 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (21 commits)
userfaultfd: replace ENOSPC with ESRCH in case mm has gone during copy/zeropage
zram: rework copy of compressor name in comp_algorithm_store()
rmap: do not call mmu_notifier_invalidate_page() under ptl
mm: fix list corruptions on shmem shrinklist
mm/balloon_compaction.c: don't zero ballooned pages
MAINTAINERS: copy virtio on balloon_compaction.c
mm: fix KSM data corruption
mm: fix MADV_[FREE|DONTNEED] TLB flush miss problem
mm: make tlb_flush_pending global
mm: refactor TLB gathering API
Revert "mm: numa: defer TLB flush for THP migration as long as possible"
mm: migrate: fix barriers around tlb_flush_pending
mm: migrate: prevent racy access to tlb_flush_pending
fault-inject: fix wrong should_fail() decision in task context
test_kmod: fix small memory leak on filesystem tests
test_kmod: fix the lock in register_test_dev_kmod()
test_kmod: fix bug which allows negative values on two config options
test_kmod: fix spelling mistake: "EMTPY" -> "EMPTY"
userfaultfd: hugetlbfs: remove superfluous page unlock in VM_SHARED case
mm: ratelimit PFNs busy info message
...
comp_algorithm_store() passes the size of the source buffer to strlcpy()
instead of the destination buffer size. Make it explicit that the two
buffers have the same size and use strcpy() instead of strlcpy(). The
latter can be done safely since the function ensures that the string in
the source buffer is terminated.
Link: http://lkml.kernel.org/r/20170803163350.45245-1-mka@chromium.org
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Acked-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit 0cb64249ca ("firmware_loader: abort request if wait_for_completion
is interrupted") added via 4.0 added support to abort the fallback mechanism
when a signal was detected and wait_for_completion_interruptible() returned
-ERESTARTSYS -- for instance when a user hits CTRL-C. The abort was overly
*too* effective.
When a child process terminates (successful or not) the signal SIGCHLD can
be sent to the parent process which ran the child in the background and
later triggered a sync request for firmware through a sysfs interface which
relies on the fallback mechanism. This signal in turn can be recieved by the
interruptible wait we constructed on firmware_class and detects it as an
abort *before* userspace could get a chance to write the firmware. Upon
failure -EAGAIN is returned, so userspace is also kept in the dark about
exactly what happened.
We can reproduce the issue with the fw_fallback.sh selftest:
Before this patch:
$ sudo tools/testing/selftests/firmware/fw_fallback.sh
...
tools/testing/selftests/firmware/fw_fallback.sh: error - sync firmware request cancelled due to SIGCHLD
After this patch:
$ sudo tools/testing/selftests/firmware/fw_fallback.sh
...
tools/testing/selftests/firmware/fw_fallback.sh: SIGCHLD on sync ignored as expected
Fix this by making the wait killable -- only killable by SIGKILL (kill -9).
We loose the ability to allow userspace to cancel a write with CTRL-C
(SIGINT), however its been decided the compromise to require SIGKILL is
worth the gains.
Chances of this issue occuring are low due to the number of drivers upstream
exclusively relying on the fallback mechanism for firmware (2 drivers),
however this is observed in the field with custom drivers with sysfs
triggers to load firmware. Only distributions relying on the fallback
mechanism are impacted as well. An example reported issue was on Android,
as follows:
1) Android init (pid=1) fork()s (say pid=42) [this child process is totally
unrelated to firmware loading, it could be sleep 2; for all we care ]
2) Android init (pid=1) does a write() on a (driver custom) sysfs file which
ends up calling request_firmware() kernel side
3) The firmware loading fallback mechanism is used, the request is sent to
userspace and pid 1 waits in the kernel on wait_*
4) before firmware loading completes pid 42 dies (for any reason, even
normal termination)
5) Kernel delivers SIGCHLD to pid=1 to tell it a child has died, which
causes -ERESTARTSYS to be returned from wait_*
6) The kernel's wait aborts and return -EAGAIN for the
request_firmware() caller.
Cc: stable <stable@vger.kernel.org> # 4.0
Fixes: 0cb64249ca ("firmware_loader: abort request if wait_for_completion is interrupted")
Suggested-by: "Eric W. Biederman" <ebiederm@xmission.com>
Suggested-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Tested-by: Martin Fuzzey <mfuzzey@parkeon.com>
Reported-by: Martin Fuzzey <mfuzzey@parkeon.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix batched requests from waiting forever on failure.
The firmware API batched requests feature has been broken since the API call
request_firmware_direct() was introduced on commit bba3a87e98 ("firmware:
Introduce request_firmware_direct()"), added on v3.14 *iff* the firmware
being requested was not present in *certain kernel builds* [0].
When no firmware is found the worker which goes on to finish never informs
waiters queued up of this, so any batched request will stall in what seems
to be forever (MAX_SCHEDULE_TIMEOUT). Sadly, a reboot will also stall, as
the reboot notifier was only designed to kill custom fallback workers. The
issue seems to the user as a type of soft lockup, what *actually* happens
underneath the hood is a wait call which never completes as we failed to
issue a completion on error.
For device drivers with optional firmware schemes (ie, Intel iwlwifi, or
Netronome -- even though it uses request_firmware() and not
request_firmware_direct()), this could mean that when you boot a system with
multiple cards the firmware will seem to never load on the system, or that
the card is just not responsive even the driver initialization. Due to
differences in scheduling possible this should not always trigger --
one would need to to ensure that multiple requests are in place at the
right time for this to work, also release_firmware() must not be called
prior to any other incoming request. The complexity may not be worth
supporting batched requests in the future given the wait mechanism is
only used also for the fallback mechanism. We'll keep it for now and
just fix it.
Its reported that at least with the Intel WiFi cards on one system this
issue was creeping up 50% of the boots [0].
Before this commit batched requests testing revealed:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
Ater this commit batched testing results:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() OK OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() OK OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() OK OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
[0] https://bugzilla.kernel.org/show_bug.cgi?id=195477
Cc: stable <stable@vger.kernel.org> # v3.14
Fixes: bba3a87e98 ("firmware: Introduce request_firmware_direct()"
Reported-by: Nicolas <nbroeking@me.com>
Reported-by: John Ewalt <jewalt@lgsinnovations.com>
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The firmware cache mechanism serves two purposes, the secondary purpose is
not well documented nor understood. This fixes a regression with the
secondary purpose of the firmware cache mechanism: batched requests on
successful lookups. Without this fix *any* time a batched request is
triggered, secondary requests for which the batched request mechanism
was designed for will seem to last forver and seem to never return.
This issue is present for all kernel builds possible, and a hard reset
is required.
The firmware cache is used for:
1) Addressing races with file lookups during the suspend/resume cycle
by keeping firmware in memory during the suspend/resume cycle
2) Batched requests for the same file rely only on work from the first file
lookup, which keeps the firmware in memory until the last
release_firmware() is called
Batched requests *only* take effect if secondary requests come in prior to
the first user calling release_firmware(). The devres name used for the
internal firmware cache is used as a hint other pending requests are
ongoing, the firmware buffer data is kept in memory until the last user of
the buffer calls release_firmware(), therefore serializing requests and
delaying the release until all requests are done.
Batched requests wait for a wakup or signal so we can rely on the first file
fetch to write to the pending secondary requests. Commit 5b02962494
("firmware: do not use fw_lock for fw_state protection") ported the firmware
API to use swait, and in doing so failed to convert complete_all() to
swake_up_all() -- it used swake_up(), loosing the ability for *some* batched
requests to take effect.
We *could* fix this by just using swake_up_all() *but* swait is now known
to be very special use case, so its best to just move away from it. So we
just go back to using completions as before commit 5b02962494 ("firmware:
do not use fw_lock for fw_state protection") given this was using
complete_all().
Without this fix it has been reported plugging in two Intel 6260 Wifi cards
on a system will end up enumerating the two devices only 50% of the time
[0]. The ported swake_up() should have actually handled the case with two
devices, however, *if more than two cards are used* the swake_up() would
not have sufficed. This change is only part of the required fixes for
batched requests. Another fix is provided in the next patch.
This particular change should fix the cases where more than three requests
with the same firmware name is used, otherwise batched requests will wait
for MAX_SCHEDULE_TIMEOUT and just timeout eventually.
Below is a summary of tests triggering batched requests on different
kernel builds.
Before this patch:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL FAIL
request_firmware_direct() FAIL FAIL
request_firmware_nowait(uevent=true) FAIL FAIL
request_firmware_nowait(uevent=false) FAIL FAIL
============================================================================
After this patch:
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=y
Most common Linux distribution setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=n
CONFIG_FW_LOADER_USER_HELPER=n
Only possible if CONFIG_DELL_RBU=n and CONFIG_LEDS_LP55XX_COMMON=n, rare.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() FAIL OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) FAIL OK
request_firmware_nowait(uevent=false) FAIL OK
============================================================================
CONFIG_FW_LOADER_USER_HELPER_FALLBACK=y
CONFIG_FW_LOADER_USER_HELPER=y
Google Android setup.
API-type no-firmware-found firmware-found
----------------------------------------------------------------------
request_firmware() OK OK
request_firmware_direct() FAIL OK
request_firmware_nowait(uevent=true) OK OK
request_firmware_nowait(uevent=false) OK OK
============================================================================
[0] https://bugzilla.kernel.org/show_bug.cgi?id=195477
CC: <stable@vger.kernel.org> [4.10+]
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 5b02962494 ("firmware: do not use fw_lock for fw_state protection")
Reported-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Luis R. Rodriguez <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This adds a new ATEN device id for a new pl2303-based device.
Reported-by: Peter Kuo <PeterKuo@aten.com.tw>
Cc: stable <stable@vger.kernel.org>
Cc: Johan Hovold <johan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Moshi USB to Ethernet Adapter internally uses a Genesys Logic hub to
connect to Realtek r8153.
The Realtek r8153 ethernet does not work on the internal hub, no-lpm quirk
can make it work.
Since another r8153 dongle at my hand does not have the issue, so add
the quirk to the Genesys Logic hub instead.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some buggy USB disk adapters disconnect and reconnect multiple times
during the enumeration procedure. This may lead to a device
connecting at full speed instead of high speed, because when the USB
stack sees that a device isn't able to enumerate at high speed, it
tries to hand the connection over to a full-speed companion
controller.
The logic for doing this is careful to check that the device is still
connected. But this check is inadequate if the device disconnects and
reconnects before the check is done. The symptom is that a device
works, but much more slowly than it is capable of operating.
The situation was made worse recently by commit 22547c4cc4 ("usb:
hub: Wait for connection to be reestablished after port reset"), which
increases the delay following a reset before a disconnect is
recognized, thus giving the device more time to reconnect.
This patch makes the check more robust. If the device was
disconnected at any time during enumeration, we will now skip the
full-speed handover.
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Reported-and-tested-by: Zdenek Kabelac <zkabelac@redhat.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Certain HP keyboards would keep inputting a character automatically which
is the wake-up key after S3 resume
On some AMD platforms USB host fails to respond (by holding resume-K) to
USB device (an HP keyboard) resume request within 1ms (TURSM) and ensures
that resume is signaled for at least 20 ms (TDRSMDN), which is defined in
USB 2.0 spec. The result is that the keyboard is out of function.
In SNPS USB design, the host responds to the resume request only after
system gets back to S0 and the host gets to functional after the internal
HW restore operation that is more than 1 second after the initial resume
request from the USB device.
As a workaround for specific keyboard ID(HP Keyboards), applying port reset
after resume when the keyboard is plugged in.
Signed-off-by: Sandeep Singh <Sandeep.Singh@amd.com>
Signed-off-by: Shyam Sundar S K <Shyam-sundar.S-k@amd.com>
cc: Nehal Shah <Nehal-bakulchandra.Shah@amd.com>
Reviewed-by: Felipe Balbi <felipe.balbi@linux.intel.com>
Cc: stable <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The numd field of directive receive command takes number of dwords to
transfer. This fix has the correct calculation for numd.
Signed-off-by: Kwan (Hingkwan) Huen-SSI <kwan.huen@samsung.com>
Reviewed-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Christoph Hellwig <hch@lst.de>
We need to return an error if a timeout occurs on any NVMe command during
initialization. Without this, the nvme reset work will be stuck. A timeout
will have a negative error code, meaning we need to stop initializing
the controller. All postitive returns mean the controller is still usable.
bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=196325
Signed-off-by: Keith Busch <keith.busch@intel.com>
Cc: Martin Peres <martin.peres@intel.com>
[jth consolidated cleanup path ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Pull networking fixes from David Miller:
1) Fix handling of initial STATE message in TIPC, from Jon Paul Maloy.
2) Fix stats handling in bcm_sysport_get_stats(), from Florian
Fainelli.
3) Reject 16777215 VNI value in geneve_validate(), from Girish
Moodalbail.
4) Fix initial IGMP sysctl setting regression, from Nikolay Borisov.
5) Once a UFO fragmented frame is treated as UFO, we should continue
doing so. Likewise once a frame has been segmented, we should
continue doing that and not try to convert it to a UFO frame. From
Willem de Bruijn.
6) Test the AF_PACKET RX/TX ring pg_vec state under the socket lock to
prevent races. From Willem de Bruijn.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
packet: fix tp_reserve race in packet_set_ring
udp: consistently apply ufo or fragmentation
net: sched: set xt_tgchk_param par.nft_compat as 0 in ipt_init_target
igmp: Fix regression caused by igmp sysctl namespace code.
geneve: maximum value of VNI cannot be used
net: systemport: Fix software statistics for SYSTEMPORT Lite
tipc: remove premature ESTABLISH FSM event at link synchronization
Pull sparc updates from David Miller:
1) Recognize M8 cpus, just basic chip ID matching, from Allen Pais.
2) Prevent crashes when bringing up sunvdc virtual block devices in
some environments. From Jim Quigley.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
sunvdc: prevent sunvdc panic when mpgroup disk added to guest domain
sparc64: Increase max_phys_bits to 51 and VA bits to 53 for M8.
sparc64: recognize and support sparc M8 cpu type
sparc64: properly name the cpu constants
Currently we create the sysfs entry even if we fail mapping
it. In that case, the unmapping will not remove the sysfs created
file. There is no good reason to create a sysfs entry for a non
working CMB and show his characteristics.
Fixes: f63572dff ("nvme: unmap CMB and remove sysfs file in reset path")
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Stephen Bates <sbates@raithlin.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Currently, calls to nvmet_fc_rcv_fcp_req() always copied the
FC-NVME cmd iu to a temporary buffer before returning, allowing
the driver to immediately repost the buffer to the hardware.
To address timing conditions on queue element structures vs async
command reception, the nvmet_fc transport occasionally may need to
hold on to the command iu buffer for a short period. In these cases,
the nvmet_fc_rcv_fcp_req() will return a special return code
(-EOVERFLOW). In these cases, the LLDD must delay until the new
defer_rcv lldd callback is called before recycling the buffer back
to the hw.
This patch adds support for the new nvmet_fc transport defer_rcv
callback and recognition of the new error code when passing commands
to the transport.
Signed-off-by: Dick Kennedy <dick.kennedy@broadcom.com>
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
