ixgbe_napi_disable_all calls napi_disable on each queue, however the busy
polling code introduced a local_bh_disable()d context around the napi_disable.
The original author did not realize that napi_disable might sleep, which would
cause a sleep while atomic BUG. In addition, on a single processor system, the
ixgbe_qv_lock_napi loop shouldn't have to mdelay. This patch adds an
ixgbe_qv_disable along with a new IXGBE_QV_STATE_DISABLED bit, which it uses to
indicate to the poll and napi routines that the q_vector has been disabled. Now
the ixgbe_napi_disable_all function will wait until all pending work has been
finished and prevent any future work from being started.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Cc: Alexander Duyck <alexander.duyck@intel.com>
Cc: Hyong-Youb Kim <hykim@myri.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Dmitry Kravkov <dmitry@broadcom.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Fix to return a negative error code from the error handling
case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
napi_disable uses an msleep() call to wait for outstanding napi work to be
finished after setting the disable bit. It does not always sleep incase there
was no outstanding work. This resulted in a rare bug in ixgbe_down operation
where a napi_disable call took place inside of a local_bh_disable()d context.
In order to enable easier detection of future sleep while atomic BUGs, this
patch adds a might_sleep() call, so that every use of napi_disable during
atomic context will be visible.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com>
Cc: Alexander Duyck <alexander.duyck@intel.com>
Cc: Hyong-Youb Kim <hykim@myri.com>
Cc: Amir Vadai <amirv@mellanox.com>
Cc: Dmitry Kravkov <dmitry@broadcom.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch removes the burden from the NIC drivers to check if the
vxlan driver is enabled in the kernel and also makes available
the vxlan headrooms to them.
Signed-off-by: Joseph Gasparakis <joseph.gasparakis@intel.com>
Tested-by: Kavindya Deegala <kavindya.s.deegala@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
useful for debugging boot issues.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)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=qzH6
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into x86/efi
Pull EFI earlyprintk support from Matt Fleming:
" * Add support for earlyprintk=efi which uses the EFI framebuffer. Very
useful for debugging boot issues. "
Signed-off-by: Ingo Molnar <mingo@kernel.org>
. Add color overhead for stdio output buffer, which fixes
--stdio output being chopped up on the hot (red) entries,
fix from Jiri Olsa.
. Get 'perf record -g -a sleep 1' working again, removing the
need for -- separating perf options from the workload, restoring
ages old behaviour, fix from Jiri Olsa.
More patches allowing ~/.perfconfig setting up of default
callchain collecting method ("fp" or "dwarf") left for next
merge window.
. Fixup mmap event consumption, where we were acking the
consumption by writing the tail before actually accessing
the event, which could lead to using overwritten records
in things like 'perf record --call-graph'. from Zhouyi Zhou.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)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=U+a8
-----END PGP SIGNATURE-----
Merge tag 'perf-urgent-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/urgent fixes from Arnaldo Carvalho de Melo:
* Add color overhead for stdio output buffer, which fixes
--stdio output being chopped up on the hot (red) entries,
fix from Jiri Olsa.
* Get 'perf record -g -a sleep 1' working again, removing the
need for -- separating perf options from the workload, restoring
ages old behaviour, fix from Jiri Olsa.
More patches allowing ~/.perfconfig setting up of default
callchain collecting method ("fp" or "dwarf") left for next
merge window.
* Fixup mmap event consumption, where we were acking the
consumption by writing the tail before actually accessing
the event, which could lead to using overwritten records
in things like 'perf record --call-graph'. From Zhouyi Zhou.
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
During xattr updating, free size should be corrected to remainder free size
+ old entry size.
It can avoid ENOSPC error when we update old entry with the same size new
entry at fully filled xattr.
Signed-off-by: Chao Yu <chao2.yu@samsung.com>
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
If you want to remove unnecessary BUG_ONs, you can just turn off F2FS_CHECK_FS
in your kernel config.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
This config will support an option to remove so many BUG_ONs that degrade
the performance potentially.
Signed-off-by: Jaegeuk Kim <jaegeuk.kim@samsung.com>
struct esp_data consists of a single pointer, vanishing the need for it
to be a structure. Fold the pointer into 'data' direcly, removing one
level of pointer indirection.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
The padlen member of struct esp_data is always zero. Get rid of it.
Signed-off-by: Mathias Krause <mathias.krause@secunet.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>
Signed-off-by: Steffen Klassert <steffen.klassert@secunet.com>
time_after_eq() only works if the delta is < MAX_ULONG/2.
For a 32bit Dom0, if netfront sends packets at a very low rate, the time
between subsequent calls to tx_credit_exceeded() may exceed MAX_ULONG/2
and the test for timer_after_eq() will be incorrect. Credit will not be
replenished and the guest may become unable to send packets (e.g., if
prior to the long gap, all credit was exhausted).
Use jiffies_64 variant to mitigate this problem for 32bit Dom0.
Suggested-by: Jan Beulich <jbeulich@suse.com>
Signed-off-by: Wei Liu <wei.liu2@citrix.com>
Reviewed-by: David Vrabel <david.vrabel@citrix.com>
Cc: Ian Campbell <ian.campbell@citrix.com>
Cc: Jason Luan <jianhai.luan@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
drivers/net/vxlan.c: In function ‘vxlan_sock_add’:
drivers/net/vxlan.c:2298:11: warning: ‘sock’ may be used uninitialized in this function [-Wmaybe-uninitialized]
drivers/net/vxlan.c:2275:17: note: ‘sock’ was declared here
LD drivers/net/built-in.o
Signed-off-by: Zhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
UFO as well as UDP_CORK do not respect IP_PMTUDISC_DO and
IP_PMTUDISC_PROBE well enough.
UFO enabled packet delivery just appends all frags to the cork and hands
it over to the network card. So we just deliver non-DF udp fragments
(DF-flag may get overwritten by hardware or virtual UFO enabled
interface).
UDP_CORK does enqueue the data until the cork is disengaged. At this
point it sets the correct IP_DF and local_df flags and hands it over to
ip_fragment which in this case will generate an icmp error which gets
appended to the error socket queue. This is not reflected in the syscall
error (of course, if UFO is enabled this also won't happen).
Improve this by checking the pmtudisc flags before appending data to the
socket and if we still can fit all data in one packet when IP_PMTUDISC_DO
or IP_PMTUDISC_PROBE is set, only then proceed.
We use (mtu-fragheaderlen) to check for the maximum length because we
ensure not to generate a fragment and non-fragmented data does not need
to have its length aligned on 64 bit boundaries. Also the passed in
ip_options are already aligned correctly.
Maybe, we can relax some other checks around ip_fragment. This needs
more research.
Signed-off-by: Hannes Frederic Sowa <hannes@stressinduktion.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The length calculation here is now invalid on 32-bit architectures,
since sk_buff::tail is a pointer and sk_buff::transport_header is
an integer offset:
drivers/net/ethernet/chelsio/cxgb3/sge.c: In function 'write_ofld_wr':
drivers/net/ethernet/chelsio/cxgb3/sge.c:1603:9: warning: passing argument 4 of 'make_sgl' makes integer from pointer without a cast [enabled by default]
adap->pdev);
^
drivers/net/ethernet/chelsio/cxgb3/sge.c:964:28: note: expected 'unsigned int' but argument is of type 'sk_buff_data_t'
static inline unsigned int make_sgl(const struct sk_buff *skb,
^
Use the appropriate skb accessor functions.
Compile-tested only.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Fixes: 1a37e412a0 ('net: Use 16bits for *_headers fields of struct skbuff')
Signed-off-by: David S. Miller <davem@davemloft.net>
When the bnx2x driver is rmmoded, if VFs of a given PF will be assigned
to a VM then that PF will be unable to call `pci_disable_sriov()'.
If for that same PF there would also exist unassigned VFs in the hypervisor,
the result will be that after the removal there will still be virtual PCI
functions on the hypervisor.
If the bnx2x module were to be re-inserted, the result will be that the VFs
on the hypervisor will be re-probed directly following the PF's probe, even
though that in regular loading flow sriov is only enabled once PF is loaded.
The probed VF will then try to access its bar, causing a PCI error as the HW
is not in a state enabling such a request.
This patch adds a missing disablement procedure to the PF's removal, one that
sets registers viewable to the VF to indicate that the VFs have no permission
to access the bar, thus resulting in probe errors instead of PCI errors.
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Buffers for FW statistics were allocated at an inappropriate time; In a machine
where the driver encounters problems allocating all of its queues, the driver
would still create FW requests for the statistics of the non-existing queues.
The wrong order of memory allocation could lead to zeroed statistics messages
being sent, leading to fw assert in case function 0 was down.
This changes the order of allocations, guaranteeing that statistic requests will
only be generated for actual queues.
Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit 6ff50cd555 ("tcp: gso: do not generate out of order packets")
had an heuristic that can trigger a warning in skb_try_coalesce(),
because skb->truesize of the gso segments were exactly set to mss.
This breaks the requirement that
skb->truesize >= skb->len + truesizeof(struct sk_buff);
It can trivially be reproduced by :
ifconfig lo mtu 1500
ethtool -K lo tso off
netperf
As the skbs are looped into the TCP networking stack, skb_try_coalesce()
warns us of these skb under-estimating their truesize.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Alexei Starovoitov <ast@plumgrid.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The virtio_net driver's mergeable receive buffer allocator
uses 4KB packet buffers. For MTU-sized traffic, SKB truesize
is > 4KB but only ~1500 bytes of the buffer is used to store
packet data, reducing the effective TCP window size
substantially. This patch addresses the performance concerns
with mergeable receive buffers by allocating MTU-sized packet
buffers using page frag allocators. If more than MAX_SKB_FRAGS
buffers are needed, the SKB frag_list is used.
Signed-off-by: Michael Dalton <mwdalton@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
All temperatures should be in tenth degrees Celsius.
Reported-by: Jonghwa Lee <jonghwa3.lee@samsung.com>
Cc: Mark A. Greer <mgreer@animalcreek.com>
Signed-off-by: Anton Vorontsov <anton@enomsg.org>
Commit 9863c28a2a ("powerpc: Emulate sync
instruction variants") introduced a build breakage with
CONFIG_PPC_EMULATED_STATS enabled.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kumar Gala <galak@kernel.org>
Cc: James Yang <James.Yang@freescale.com>
---
During "make ppc6xx_defconfig" the following happens:
HOSTCC scripts/basic/fixdep
GEN /usr/local/src/tmp/lnx/Makefile
HOSTCC scripts/kconfig/conf.o
HOSTCC scripts/kconfig/zconf.tab.o
HOSTLD scripts/kconfig/conf
arch/powerpc/configs/ppc6xx_defconfig:74:warning: symbol value 'm' invalid for MCU_MPC8349EMITX
Setting CONFIG_MCU_MPC8349EMITX=y in ppc6xx_defconfig makes the warning
go away. This too has been reported by Geert Uytterhoeven a long time ago:
https://lkml.org/lkml/2011/11/13/11 - I only came across this because I
needed a "clean" defconfig for this Powerbook G5.
Signed-off-by: Christian Kujau <lists@nerdbynature.de>
[scottwood@freescale.com: cleaned up commit message slightly]
Signed-off-by: Scott Wood <scottwood@freescale.com>
In case of error, the function platform_device_register_simple() returns
RR_PTR() and never returns NULL. The NULL test in the return value check
should be replaced with IS_ERR().
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
The P1010RDB-PB is similar to P1010RDB(P1010RDB-PA).
So, P1010RDB-PB use the same platform file as P1010RDB.
Then Add support for P1010RDB-PB platform.
Signed-off-by: Zhao Qiang <B45475@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
A few new i2c-drivers came into the kernel which clear the clientdata-pointer
on exit or error. This is obsolete meanwhile, the core will do it.
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Add the missing iounmap() before return from hlwd_pic_init()
in the error handling case.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Activating CONFIG_PIN_TLB allows access to the 24 first Mbytes of
memory at bootup instead of 8. It is needed for "big" kernels for
instance when activating CONFIG_LOCKDEP_SUPPORT. This needs to be
taken into account in init_32 too, otherwise memory allocation soon
fails after startup.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Acked-by: Joakim Tjernlund <Joakim.Tjernlund@transmode.se>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Activating CONFIG_PIN_TLB is supposed to pin the IMMR and the first
three 8Mbytes pages. But the setting of MD_CTR to a pinnable entry was
missing before the pinning of the third 8Mb page. As the index is
decremented module 28 (MD_RSV4D is set) after every DTLB update, the
third 8Mbytes page was not pinned.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Currently all these boards use the same machine struct and also select
the same kernel options, so it seems a bit of redundant to keep one
separate kernel option for each board. Also update the defconfigs
according to this change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This file is also used by some RDB and QDS boards. So the name seems
not so accurate. Rename it to corenet_generic.c. Also update the
function names in this file according to the change.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
In the current kernel, the board files for p2041rdb, p3041ds, p4080ds,
p5020ds, p5040ds, t4240qds and b4qds are almost the same except the
machine name. So this introduces a cornet_generic machine to support
all these boards to avoid the code duplication.
With these changes the file corenet_ds.h becomes useless. Just delete
it.
Signed-off-by: Kevin Hao <haokexin@gmail.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
C290PCIe has NAND flash present on IFC Chip Select(CS) 1.
So Add "ranges" field for NAND flash on CS1.
Signed-off-by: Prabhakar Kushwaha <prabhakar@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
B4860EMU is a emualtor target with minimum peripherals. It is based on
B4860QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.
Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fix]
Signed-off-by: Scott Wood <scottwood@freescale.com>
T4240EMU is an emulator target with minimum peripherals. It is based on
T4240QDS and trimmed down most peripherals due to either not modeled or
lack of board level connections. The main purpose of this minimum dts is
to speed up booting on emulator.
Signed-off-by: York Sun <yorksun@freescale.com>
[scottwood@freescale.com: whitespace fixes]
Signed-off-by: Scott Wood <scottwood@freescale.com>
Commit 9837b43c5f ("powerpc/85xx: enable
coreint for all the 64bit boards") removed the ifdef that avoided
coreint on 64-bit, but it missed b4_qds.c.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Cc: Kevin Hao <haokexin@gmail.com>
Cc: Shaveta Leekha <shaveta@freescale.com>
The commit e0908085fc ("powerpc/8xx: Fix
regression introduced by cache coherency rewrite") is not needed
anymore. The issue was because dcbst wrongly sets the store bit when
causing a DTLB error, but this is now fixed by commit
0a2ab51ffb ("powerpc/8xx: Fixup DAR from
buggy dcbX instructions.") which handles the buggy dcbx instructions on
data page faults on the 8xx.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
[scottwood@freescale.com: fix commit message]
Signed-off-by: Scott Wood <scottwood@freescale.com>
In both B4 and T4240QDS platform PCA9547 I2C bus multiplexer is used.
The sub-nodes are also reorganized according to right I2C topology.
Signed-off-by: Jia Hongtao <hongtao.jia@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Enable CONFIG_AT803X_PHY to support AR8030/8033/8035 PHY.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
We use property "sdhci,auto-cmd12" instead of "fsl,sdhci-auto-cmd12"
to distinguish if the sdhc host has quirk SDHCI_QUIRK_MULTIBLOCK_READ_ACMD12.
Signed-off-by: Haijun Zhang <Haijun.Zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Freescale T4240QDS reference board has extra voltage shifters added
to allow 3.3V operation, so add 3.3v voltage support for T4240QDS.
1.8v and 3.3v is recommand for eMMC and SDHC card.
Signed-off-by: Haijun Zhang <haijun.zhang@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
This patch modifies the Oops message in case of Software Emulation Exception.
The existing message is quite confusing because it refers to FPU Emulation
while most often the issue is due to either a non supported instruction
(not necessarily FPU related) or a stale instruction due to HW issues.
The new message tries to be more generic in order to make the user understand
that the Oops is due to something wrong with an instruction, not necessarily
due to an FPU instruction.
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Scott Wood <scottwood@freescale.com>
The regset defintion for SPE doesn't have the core_note_type
set, which prevents it from being dumped. Add the note type
NT_PPC_SPE for SPE regset.
Signed-off-by: Suzuki K Poulose <suzuki@in.ibm.com>
Cc: Roland McGrath <roland@hack.frob.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
bsc9131 device tree does not have these properties.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
b4420 and b4860 device trees do not have these properties.
Signed-off-by: Lijun Pan <Lijun.Pan@freescale.com>
Signed-off-by: Scott Wood <scottwood@freescale.com>
Freescale platform has class code = 0x0b2000, when it boots. This makes
kernel PCI bus code to setup these devices resulting into the following
notice information when trying to enable them:
pci 0000:00:00.0: ignoring class 0x0b2000 (doesn't match header type 01)
The above information is outputted by judging value of dev->class before
pci_setup_device() function, and the DECLARE_PCI_FIXUP_HEADER quirk runs
after pci_setup_device() function. But the DECLARE_PCI_FIXUP_EARLY quirk
runs before judging value of dev->class and pci_setup_device() function.
So we use the DECLARE_PCI_FIXUP_EARLY macro to fix this issue.
Signed-off-by: Chunhe Lan <Chunhe.Lan@freescale.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Mackerras <paulus@samba.org>
Signed-off-by: Scott Wood <scottwood@freescale.com>
