These functions are only needed by NFS v4, so they can be moved into a
v4 specific file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This allows me to move the v4 mounting and unmounting functions out of
the generic client and into a file that is only compiled when CONFIG_NFS_V4
is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
v2 and v3 shared a function for this, but v4 implemented something only
slightly different. Might as well share code whenever possible...
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
These functions are specific to NFS v4 and can be moved to nfs4client.c
to keep them out of the generic client.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
And split these functions out of the generic client into a v4 specific
file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v4 file functions into a new file that is only
compiled when CONFIG_NFS_V4 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch adds the initial skeleton for Three-wire UART (H5) support
and hooks it up to the HCI UART framework.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
And split them out of the generic client into their own file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
I want to initialize all of NFS v4 in a single function that will
eventually be used as the v4 module init function.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
The NFS v4 file inode operations are already already in nfs4proc.c, so
this patch just needs to move the directory operations to the same file.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v3 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V3 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
This patch moves the NFS v2 file and directory inode functions into
files that are only compiled whet CONFIG_NFS_V2 is enabled.
Signed-off-by: Bryan Schumaker <bjschuma@netapp.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Use the ANSI/VITA 4.0-1995 (S2011) naming convention for the mezzanine or
daughter boards. They are called IP modules in the Standard.
Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fixed a coding style issue. An else statement was
not on the same line as the preceding if statement's
closing brace.
Signed-off-by: Erik Jones <erik@ejnode.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.19 (GNU/Linux)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=tiQg
-----END PGP SIGNATURE-----
Merge tag 'iio-fixes-3.6b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next
IIO fixes for elements queued for 3.6 merge window.
3 types of fix here.
1) Incorrect pointer casting via phys_addr_t which causes
trouble on some architectures.
2) request_irq and free_irq dev_id parameters not matching.
3) Inconsistencies in client_data for some i2c devices
(writing one pointer and expecting another later).
class_create if succeeded returns a pointer to the struct class,
and if it fails, it returns a value enclosed by the pointer, which
can be read by using PTR_ERR.
Handle the error and return it.
result is for error checking of the alloc_chrdev_region, instead
ret can be used, and also if the alloc_chrdev_region fail,
we are still returning -ENODEV, use ret and the error path will
take care of returning of the ret.
Signed-off-by: Devendra Naga <develkernel412222@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit af061a644a ("IB/qib: Use RCU for qpn lookup") introduced sparse
warnings.
This patch corrects those issues.
Signed-off-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Roland Dreier <roland@purestorage.com>
Since the function accepts just one bit, we can use the switch
construction instead of if/else if/...
Just a cosmetic change, there should be no functional changes.
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ftrace log size is configurable via ramoops.ftrace_size
module option, and the log itself is available via
<pstore-mount>/ftrace-ramoops file.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Don't use pstore.buf directly, instead convert the code to write_buf callback
which passes a pointer to a buffer as an argument.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This patch introduces 'func_ptrace' option, now available in
/sys/kernel/debug/tracing/options when function tracer
is selected.
The patch also adds some tiny code that calls back to pstore
to record the trace. The callback is no-op when PSTORE=n.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
With this support kernel can save function call chain log into a
persistent ram buffer that can be decoded and dumped after reboot
through pstore filesystem. It can be used to determine what function
was last called before a reset or panic.
We store the log in a binary format and then decode it at read time.
p.s.
Mostly the code comes from trace_persistent.c driver found in the
Android git tree, written by Colin Cross <ccross@android.com>
(according to sign-off history). I reworked the driver a little bit,
and ported it to pstore.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For function tracing we need to stop using pstore.buf directly, since
in a tracing callback we can't use spinlocks, and thus we can't safely
use the global buffer.
With write_buf callback, backends no longer need to access pstore.buf
directly, and thus we can pass any buffers (e.g. allocated on stack).
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
If tracer->init() fails, current code will leave current_tracer pointing
to an unusable tracer, which at best makes 'current_tracer' report
inaccurate value.
Fix the issue by pointing current_tracer to nop tracer, and only update
current_tracer with the new one after all the initialization succeeds.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Nowadays we can use prz->ecc_size as a flag, no need for the special
member in the prz struct.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is now pretty straightforward: instead of using bool, just pass
an integer. For backwards compatibility ramoops.ecc=1 means 16 bytes
ECC (using 1 byte for ECC isn't much of use anyway).
Suggested-by: Arve Hjønnevåg <arve@android.com>
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The struct members were never used anywhere outside of
persistent_ram_init_ecc(), so there's actually no need for them
to be in the struct.
If we ever want to make polynomial or symbol size configurable,
it would make more sense to just pass initialized rs_decoder
to the persistent_ram init functions.
Signed-off-by: Anton Vorontsov <anton.vorontsov@linaro.org>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
don't assume that KOBJ_NS_TYPE_NONE==0. Also save a test-n-branch.
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Glauber Costa <glommer@parallels.com>
Cc: Tejun Heo <tj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Acked-by: Serge E. Hallyn <serge.hallyn@ubuntu.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When we change the namespace tag of a sysfs entry, the associated dentry
is still kept around. readdir() will work correctly and not display the
old entries, but open() will still succeed, so will reads and writes.
This will no longer happen if sysfs is remounted, hinting that this is a
cache-related problem.
I am using the following sequence to demonstrate that:
shell1:
ip link add type veth
unshare -nm
shell2:
ip link set veth1 <pid_of_shell_1>
cat /sys/devices/virtual/net/veth1/ifindex
Before that patch, this will succeed (fail to fail). After it, it will
correctly return an error. Differently from a normal rename, which we
handle fine, changing the object namespace will keep it's path intact.
So this check seems necessary as well.
[ v2: get type from parent, as suggested by Eric Biederman ]
Signed-off-by: Glauber Costa <glommer@parallels.com>
CC: Tejun Heo <tj@kernel.org>
Reviewed-by: "Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There should be no point in continuing to try to detect a microphone any
more so stop doing so.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use extcon_set_state_ for performance and split the headset into separate
headphone and microphone reports as this is more idiomatic.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
It's done in very similar way this is done in bonding and bridge.
Signed-off-by: Jiri Pirko <jiri@resnulli.us>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a regime where we have subnetted route entries, we need a way to
store persistent storage about destination specific learned values
such as redirects and PMTU values.
This is implemented here via nexthop exceptions.
The initial implementation is a 2048 entry hash table with relaiming
starting at chain length 5. A more sophisticated scheme can be
devised if that proves necessary.
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull networking fixes from David Miller:
1) IPVS oops'ers:
a) Should not reset skb->nf_bridge in forwarding hook (Lin Ming)
b) 3.4 commit can cause ip_vs_control_cleanup to be invoked after
the ipvs_core_ops are unregistered during rmmod (Julian ANastasov)
2) ixgbevf bringup failure can crash in TX descriptor cleanup
(Alexander Duyck)
3) AX25 switch missing break statement hoses ROSE sockets (Alan Cox)
4) CAIF accesses freed per-net memory (Sjur Brandeland)
5) Network cgroup code has out-or-bounds accesses (Eric DUmazet), and
accesses freed memory (Gao Feng)
6) Fix a crash in SCTP reported by Dave Jones caused by freeing an
association still on a list (Neil HOrman)
7) __netdev_alloc_skb() regresses on GFP_DMA using drivers because that
GFP flag is not being retained for the allocation (Eric Dumazet).
8) Missing NULL hceck in sch_sfb netlink message parsing (Alan Cox)
9) bnx2 crashes because TX index iteration is not bounded correctly
(Michael Chan)
10) IPoIB generates warnings in TCP queue collapsing (via
skb_try_coalesce) because it does not set skb->truesize correctly
(Eric Dumazet)
11) vlan_info objects leak for the implicit vlan with ID 0 (Amir
Hanania)
12) A fix for TX time stamp handling in gianfar does not transfer socket
ownership from one packet to another correctly, resulting in a
socket write space imbalance (Eric Dumazet)
13) Julia Lawall found several cases where we do a list iteration, and
then at the loop termination unconditionally assume we ended up with
real list object, rather than the list head itself (CNIC, RXRPC,
mISDN).
14) The bonding driver handles procfs moving incorrectly when a device
it manages is moved from one namespace to another (Eric Biederman)
15) Missing memory barriers in stmmac descriptor accesses result in
various crashes (Deepak Sikri)
16) Fix handling of broadcast packets in batman-adv (Simon Wunderlich)
17) Properly check the sanity of sendmsg() lengths in ieee802154's
dgram_sendmsg(). Dave Jones and others have hit and reported this
bug (Sasha Levin)
18) Some drivers (b44 and b43legacy) on 64-bit machines stopped working
because of how netdev_alloc_skb() was adjusted. Such drivers should
now use alloc_skb() for obtaining bounce buffers. (Eric Dumazet)
19) atl1c mis-managed it's link state in that it stops the queue by hand
on link down. The generic networking takes care of that and this
double stop locks the queue down. So simply removing the driver's
queue stop call fixes the problem (Cloud Ren)
20) Fix out-of-memory due to mis-accounting in net_em packet scheduler
(Eric Dumazet)
21) If DCB and SR-IOV are configured at the same time in IXGBE the chip
will hang because this is not supported (Alexander Duyck)
22) A commit to stop drivers using netdev->base_addr broke the CNIC
driver (Michael Chan)
23) Timeout regression in ipset caused by an attempt to fix an overflow
bug (Jozsef Kadlecsik).
24) mac80211 minstrel code allocates memory using incorrect size
(Thomas Huehn)
25) llcp_sock_getname() needs to check for a NULL device otherwise we
OOPS (Sasha Levin)
26) mwifiex leaks memory (Bing Zhao)
27) Propagate iwlwifi fix to iwlegacy, even when we're not associated
we need to monitor for stuck queues in the watchdog handler
(Stanislaw Geuszka)
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
ipvs: fix oops in ip_vs_dst_event on rmmod
ipvs: fix oops on NAT reply in br_nf context
ixgbevf: Fix panic when loading driver
ax25: Fix missing break
MAINTAINERS: reflect actual changes in IEEE 802.15.4 maintainership
caif: Fix access to freed pernet memory
net: cgroup: fix access the unallocated memory in netprio cgroup
ixgbevf: Prevent RX/TX statistics getting reset to zero
sctp: Fix list corruption resulting from freeing an association on a list
net: respect GFP_DMA in __netdev_alloc_skb()
e1000e: fix test for PHY being accessible on 82577/8/9 and I217
e1000e: Correct link check logic for 82571 serdes
sch_sfb: Fix missing NULL check
bnx2: Fix bug in bnx2_free_tx_skbs().
IPoIB: fix skb truesize underestimatiom
net: Fix memory leak - vlan_info struct
gianfar: fix potential sk_wmem_alloc imbalance
drivers/net/ethernet/broadcom/cnic.c: remove invalid reference to list iterator variable
net/rxrpc/ar-peer.c: remove invalid reference to list iterator variable
drivers/isdn/mISDN/stack.c: remove invalid reference to list iterator variable
...
eliminates the dependency on arbitrary initialization orders.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=JsP6
-----END PGP SIGNATURE-----
Merge tag 'single-rpmsg-3.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg
Pull rpmsg fix from Ohad Ben-Cohen:
"A single rpmsg fix for 3.5, coming from Federico Fuga, which
eliminates the dependency on arbitrary initialization orders."
* tag 'single-rpmsg-3.5-fix' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/rpmsg:
rpmsg: fix dependency on initialization order
Pull CMA and DMA-mapping fixes from Marek Szyprowski:
"Another set of minor fixups for recently merged Contiguous Memory
Allocator and ARM DMA-mapping changes. Those patches fix mysterious
crashes on systems with CMA and Himem enabled as well as some corner
cases caused by typical off-by-one bug."
* 'fixes-for-linus' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping:
ARM: dma-mapping: modify condition check while freeing pages
mm: cma: fix condition check when setting global cma area
mm: cma: don't replace lowmem pages with highmem
Some interface statistics are computed in such a way that they can
sometimes decrease (and even underflow). Since the computed value
will never be greater than the true value, we fix this by only storing
the computed value when it increases.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Currently VF queues and drivers may remain active during this test.
This could cause memory corruption or spurious test failures.
Therefore we reset the port/function before running these tests on
Siena.
On Falcon this doesn't work: we have to do some additional
initialisation before some blocks will work again. So refactor the
reset/register-test sequence into an efx_nic_type method so
efx_selftest() doesn't have to consider such quirks.
In the process, fix another minor bug: Siena does not have an
'invisible' reset and the self-test currently fails to push the PHY
configuration after resetting. Passing RESET_TYPE_ALL to
efx_reset_{down,up}() fixes this.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Fix CID 113952 in Coverity report on Linux.
This is the one instance where we don't, and shouldn't, check the
return code from efx_mcdi_rpc(). It wasn't immediately obvious to me
why we didn't, so I think an explanation is in order.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Fix CID 102619 in the Coverity report on Linux.
efx_end_loopback() iterates over an array of skb pointers of which
some may be null (if efx_begin_loopback() failed). It should not use
dev_kfree_skb_irq(), which requires non-null pointers. In practice
this is safe because it does not run in interrupt context and
therefore always ends up calling dev_kfree_skb(), which does allow
null pointers. But we should make that explicit.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
Fix CID 113703 in the Coverity report on Linux.
ethtool stats names are limited to 32 bytes including a null
terminator. Use strlcpy() to ensure that we will always include the
null terminator even if a source string becomes longer than this.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
There is nothing in the VLAN driver or core VLAN support that
invalidates the TCP and IP header offsets.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
tso_state::packet_space is always set in tso_start_packet(); the
value set in tso_start() is not used, and is also incorrect.
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
