This patch comes as a result of Sinan Kaya's work and the decision that
writel() must be a strong enough barrier for DMA.
wmb usages in qedr driver have either been removed where they were there
only to order DMA accesses, and replaced with smp_wmb and comments for the
places that the barrier was there for SMP reasons.
Fixes: 561e5d4896 ("RDMA/qedr: eliminate duplicate barriers on weakly-ordered archs")
Signed-off-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Ariel Elior <Ariel.Elior@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Make cpuidle_idle_call() decide whether or not to stop the tick.
First, the cpuidle_enter_s2idle() path deals with the tick (and with
the entire timekeeping for that matter) by itself and it doesn't need
the tick to be stopped beforehand.
Second, to address the issue with short idle duration predictions
by the idle governor after the tick has been stopped, it will be
necessary to change the ordering of cpuidle_select() with respect
to tick_nohz_idle_stop_tick(). To prepare for that, put a
tick_nohz_idle_stop_tick() call in the same branch in which
cpuidle_select() is called.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Push the decision whether or not to stop the tick somewhat deeper
into the idle loop.
Stopping the tick upfront leads to unpleasant outcomes in case the
idle governor doesn't agree with the nohz code on the duration of the
upcoming idle period. Specifically, if the tick has been stopped and
the idle governor predicts short idle, the situation is bad regardless
of whether or not the prediction is accurate. If it is accurate, the
tick has been stopped unnecessarily which means excessive overhead.
If it is not accurate, the CPU is likely to spend too much time in
the (shallow, because short idle has been predicted) idle state
selected by the governor [1].
As the first step towards addressing this problem, change the code
to make the tick stopping decision inside of the loop in do_idle().
In particular, do not stop the tick in the cpu_idle_poll() code path.
Also don't do that in tick_nohz_irq_exit() which doesn't really have
enough information on whether or not to stop the tick.
Link: https://marc.info/?l=linux-pm&m=150116085925208&w=2 # [1]
Link: https://tu-dresden.de/zih/forschung/ressourcen/dateien/projekte/haec/powernightmares.pdf
Suggested-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Prepare the scheduler tick code for reworking the idle loop to
avoid stopping the tick in some cases.
The idea is to split the nohz idle entry call to decouple the idle
time stats accounting and preparatory work from the actual tick stop
code, in order to later be able to delay the tick stop once we reach
more power-knowledgeable callers.
Move away the tick_nohz_start_idle() invocation from
__tick_nohz_idle_enter(), rename the latter to
__tick_nohz_idle_stop_tick() and define tick_nohz_idle_stop_tick()
as a wrapper around it for calling it from the outside.
Make tick_nohz_idle_enter() only call tick_nohz_start_idle() instead
of calling the entire __tick_nohz_idle_enter(), add another wrapper
disabling and enabling interrupts around tick_nohz_idle_stop_tick()
and make the current callers of tick_nohz_idle_enter() call it too
to retain their current functionality.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Frederic Weisbecker <frederic@kernel.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
New drivers:
- Nintendo Wii GameCube GPIO, known as "Hollywood"
- Raspberry Pi mailbox service GPIO expander
- Spreadtrum main SC9860 SoC and IEC GPIO controllers.
Improvements:
- Implemented .get_multiple() callback for most of the
high-performance industrial GPIO cards for the ISA bus.
- ISA GPIO drivers now select the ISA_BUS_API instead of
depending on it. This is merged with the same pattern
for all the ISA drivers and some other Kconfig cleanups
related to this.
Cleanup:
- Delete the TZ1090 GPIO drivers following the deletion of
this SoC from the ARM tree.
- Move the documentation over to driver-api to conform with
the rest of the kernel documentation build.
- Continue to make the GPIO drivers include only
<linux/gpio/driver.h> and not the too broad <linux/gpio.h>
that we want to get rid of.
- Managed to remove VLA allocation from two drivers pending
more fixes in this area for the next merge window.
- Misc janitorial fixes.
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJaxIehAAoJEEEQszewGV1zlEAP/3p3E6J8vPqJNV/C39c40krC
ajo0ndiTC7cotmCXNQOl9xfMCTgkjBtx3WEKwTDfCsuWW+2YB0DRmMd0Bkf2RWjQ
nM4rB64FzAu+rdD9jdGtfn24ofylSRFaHNQ/V8Prc2JVAXJt4DS97h+6kwzIAqCm
A/xXQAx67k5qoTXLvR2n/8LX8TphSe2kwH/f/3/lJpNLfLCRRJ3GqJfpa72jw2eL
4VIPc6KmttkqzJ1GFtzLPfhkhRr0p4sSzUNydlj5BKhmOSVu6Afv5ylgpK/p38dQ
mGvNqFnU0lpwelsoZK75YikDFbqQjn4XkXJGvmIRMw4qM7crcw5oSkeMwCrcGqJW
7Uo7NoQU94wcQSZTppFQdaJs7NHdcnpW7jcfRYYetZL/6eDGBtfxoym90Lyjvaqs
y+ykofbadI0X/9omO5j+qozvIneLam/CF7iDRUb/5t1LJbNwtXUsVYhz3FuwPDt1
ZHb6w+np9ZHN6H9jz3b/F9B/uQt54pshm7NorSXrJvZfKrv8kV14MoHgYsuQDDjV
khbveygB8DwaPeV4XjpLeYhJB1L/Wjf46CVD6tyaCRDByGQmdoJEQF9QB2CxrF2J
ouaaaS8tSC0IK/mKMMgJxC1Vr2gh0NMlQ3AL9EJDJvX+9RoIA2gwtBAiGnlEcdq3
GyFAZ0szb5P4BaNnX9qc
=C5t5
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO updates from Linus Walleij:
"This is the bulk of GPIO changes for the v4.17 kernel cycle:
New drivers:
- Nintendo Wii GameCube GPIO, known as "Hollywood"
- Raspberry Pi mailbox service GPIO expander
- Spreadtrum main SC9860 SoC and IEC GPIO controllers.
Improvements:
- Implemented .get_multiple() callback for most of the
high-performance industrial GPIO cards for the ISA bus.
- ISA GPIO drivers now select the ISA_BUS_API instead of depending on
it. This is merged with the same pattern for all the ISA drivers
and some other Kconfig cleanups related to this.
Cleanup:
- Delete the TZ1090 GPIO drivers following the deletion of this SoC
from the ARM tree.
- Move the documentation over to driver-api to conform with the rest
of the kernel documentation build.
- Continue to make the GPIO drivers include only
<linux/gpio/driver.h> and not the too broad <linux/gpio.h> that we
want to get rid of.
- Managed to remove VLA allocation from two drivers pending more
fixes in this area for the next merge window.
- Misc janitorial fixes"
* tag 'gpio-v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio: (77 commits)
gpio: Add Spreadtrum PMIC EIC driver support
gpio: Add Spreadtrum EIC driver support
dt-bindings: gpio: Add Spreadtrum EIC controller documentation
gpio: ath79: Fix potential NULL dereference in ath79_gpio_probe()
pinctrl: qcom: Don't allow protected pins to be requested
gpiolib: Support 'gpio-reserved-ranges' property
gpiolib: Change bitmap allocation to kmalloc_array
gpiolib: Extract mask allocation into subroutine
dt-bindings: gpio: Add a gpio-reserved-ranges property
gpio: mockup: fix a potential crash when creating debugfs entries
gpio: pca953x: add compatibility for pcal6524 and pcal9555a
gpio: dwapb: Add support for a bus clock
gpio: Remove VLA from xra1403 driver
gpio: Remove VLA from MAX3191X driver
gpio: ws16c48: Implement get_multiple callback
gpio: gpio-mm: Implement get_multiple callback
gpio: 104-idi-48: Implement get_multiple callback
gpio: 104-dio-48e: Implement get_multiple callback
gpio: pcie-idio-24: Implement get_multiple/set_multiple callbacks
gpio: pci-idio-16: Implement get_multiple callback
...
rxe driver's add_gid() and del_gid() callbacks are doing simple
checks which are already done by the ib core before invoking these
callback routines.
Therefore, code is simplified to skip implementing add_gid() and
del_gid() callback functions.
They are only invoked by ib_core if they are implemented.
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
The fact this struct was not init'd like all the others was missed when
the padding reserved field was added.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Fixes: 71e80a4781 ("RDMA/qedr: Fix uABI structure layouts for 32/64 compat")
Acked-by: Michal Kalderon <Michal.Kalderon@cavium.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
To reduce the chance that random user space content leaks down the call
chain in registers, also clear lower registers on syscall entry:
For 64-bit syscalls, extend the register clearing in PUSH_AND_CLEAR_REGS
to %dx and %cx. This should not hurt at all, also on the other callers
of that macro. We do not need to clear %rdi and %rsi for syscall entry,
as those registers are used to pass the parameters to do_syscall_64().
For the 32-bit compat syscalls, do_int80_syscall_32() and
do_fast_syscall_32() each only take one parameter. Therefore, extend the
register clearing to %dx, %cx, and %si in entry_SYSCALL_compat and
entry_INT80_compat.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-8-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Extend ARCH_HAS_SYSCALL_WRAPPER for i386 emulation and for x32 on 64-bit
x86.
For x32, all we need to do is to create an additional stub for each
compat syscall which decodes the parameters in x86-64 ordering, e.g.:
asmlinkage long __compat_sys_x32_xyzzy(struct pt_regs *regs)
{
return c_SyS_xyzzy(regs->di, regs->si, regs->dx);
}
For i386 emulation, we need to teach compat_sys_*() to take struct
pt_regs as its only argument, e.g.:
asmlinkage long __compat_sys_ia32_xyzzy(struct pt_regs *regs)
{
return c_SyS_xyzzy(regs->bx, regs->cx, regs->dx);
}
In addition, we need to create additional stubs for common syscalls
(that is, for syscalls which have the same parameters on 32-bit and
64-bit), e.g.:
asmlinkage long __sys_ia32_xyzzy(struct pt_regs *regs)
{
return c_sys_xyzzy(regs->bx, regs->cx, regs->dx);
}
This approach avoids leaking random user-provided register content down
the call chain.
This patch is based on an original proof-of-concept
| From: Linus Torvalds <torvalds@linux-foundation.org>
| Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and was split up and heavily modified by me, in particular to base it on
ARCH_HAS_SYSCALL_WRAPPER.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-6-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It may be useful for an architecture to override the definitions of the
COMPAT_SYSCALL_DEFINE0() and __COMPAT_SYSCALL_DEFINEx() macros in
<linux/compat.h>, in particular to use a different calling convention
for syscalls. This patch provides a mechanism to do so, based on the
previously introduced CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled,
<asm/sycall_wrapper.h> is included in <linux/compat.h> and may be used
to define the macros mentioned above. Moreover, as the syscall calling
convention may be different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set,
the compat syscall function prototypes in <linux/compat.h> are #ifndef'd
out in that case.
As some of the syscalls and/or compat syscalls may not be present,
the COND_SYSCALL() and COND_SYSCALL_COMPAT() macros in kernel/sys_ni.c
as well as the SYS_NI() and COMPAT_SYS_NI() macros in
kernel/time/posix-stubs.c can be re-defined in <asm/syscall_wrapper.h> iff
CONFIG_ARCH_HAS_SYSCALL_WRAPPER is enabled.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-5-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Let's make use of ARCH_HAS_SYSCALL_WRAPPER=y on pure 64-bit x86-64 systems:
Each syscall defines a stub which takes struct pt_regs as its only
argument. It decodes just those parameters it needs, e.g:
asmlinkage long sys_xyzzy(const struct pt_regs *regs)
{
return SyS_xyzzy(regs->di, regs->si, regs->dx);
}
This approach avoids leaking random user-provided register content down
the call chain.
For example, for sys_recv() which is a 4-parameter syscall, the assembly
now is (in slightly reordered fashion):
<sys_recv>:
callq <__fentry__>
/* decode regs->di, ->si, ->dx and ->r10 */
mov 0x70(%rdi),%rdi
mov 0x68(%rdi),%rsi
mov 0x60(%rdi),%rdx
mov 0x38(%rdi),%rcx
[ SyS_recv() is automatically inlined by the compiler,
as it is not [yet] used anywhere else ]
/* clear %r9 and %r8, the 5th and 6th args */
xor %r9d,%r9d
xor %r8d,%r8d
/* do the actual work */
callq __sys_recvfrom
/* cleanup and return */
cltq
retq
The only valid place in an x86-64 kernel which rightfully calls
a syscall function on its own -- vsyscall -- needs to be modified
to pass struct pt_regs onwards as well.
To keep the syscall table generation working independent of
SYSCALL_PTREGS being enabled, the stubs are named the same as the
"original" syscall stubs, i.e. sys_*().
This patch is based on an original proof-of-concept
| From: Linus Torvalds <torvalds@linux-foundation.org>
| Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
and was split up and heavily modified by me, in particular to base it on
ARCH_HAS_SYSCALL_WRAPPER, to limit it to 64-bit-only for the time being,
and to update the vsyscall to the new calling convention.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-4-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
It may be useful for an architecture to override the definitions of the
SYSCALL_DEFINE0() and __SYSCALL_DEFINEx() macros in <linux/syscalls.h>,
in particular to use a different calling convention for syscalls.
This patch provides a mechanism to do so: It introduces
CONFIG_ARCH_HAS_SYSCALL_WRAPPER. If it is enabled, <asm/sycall_wrapper.h>
is included in <linux/syscalls.h> and may be used to define the macros
mentioned above. Moreover, as the syscall calling convention may be
different if CONFIG_ARCH_HAS_SYSCALL_WRAPPER is set, the syscall function
prototypes in <linux/syscalls.h> are #ifndef'd out in that case.
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-3-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have it in a register in the low-level asm, just pass it in as an
argument rather than have do_syscall_64() load it back in from the
ptregs pointer.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20180405095307.3730-2-linux@dominikbrodowski.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Now that we can have extra title lines we should use ui_browser->rows
and not ->height when drawing lines, as well as adding
ui_browser->extra_title_lines to browser->y when cleaning unused lines
at the bottom, otherwise we end up clobbering with spaces the last line
just shown by ui_browser->refresh() routine.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ef9ff6017e ("perf ui browser: Move the extra title lines from the hists browser")
Link: https://lkml.kernel.org/n/tip-dfcpokt1pm5ixm8n9pxwtstz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Now that we can have extra title lines we should use ui_browser->rows
and not ->height when drawing lines, as it will use ui_browser__gotorc()
and that will take the extra title lines into account, which was causing
an off by one at the end of the vertical line drawn by
__ui_browser__vline(), fix it.
The visual effect was that the last line, with status messages, was
being overwritten by the vertical line, looking like:
Press 'h' for help on│key bindings
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: ef9ff6017e ("perf ui browser: Move the extra title lines from the hists browser")
Link: https://lkml.kernel.org/n/tip-08y1ln3xjn76zvizz1i1dsvn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To match what is shown in the main 'perf report/top' title lines, i.e.
if a group is being shown, either a real group (recorded with "-e
'{a,b,c}') or a forced group (using 'perf report --group' for a
perf.data file recorded without {}) we will show multiple columns,
one per event, but we were failing to show the group details, so, for:
# perf report --header-only | grep cmdline
# cmdline : /home/acme/bin/perf record -e {cycles,instructions,cache-misses}
# perf report --group
The first line was showing just "cycles", now it shows the correct line,
which is:
Samples: 578 of events 'anon group { cycles, instructions, cache-misses }', 4000 Hz, Event count (approx.): 487421794
syscall_return_via_sysret /lib/modules/4.16.0-rc7/build/vmlinux
0.22 2.97 0.00 │ ↓ jmp 6c
│ mov %cr3,%rdi
1.33 10.89 4.00 │ ↓ jmp 62
│ mov %rdi,%rax
<SNIP>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 6920e2854e ("perf annotate browser: Show extra title line with event information")
Link: https://lkml.kernel.org/n/tip-i41tqh17c2dabnyzjh99r1oz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In preparation for supporting AUX area sampling buffers,
auxtrace_queues__add_buffer() needs to be more generic. To that end,
move memory allocation for struct buffer into it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1520327598-1317-7-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Modify configuration and MakeFile
for the Nuvoton NPCM and NPCM7xx BMC.
[arnd: took this one late, since it fixes some build problems
with the original commit]
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Commit 8a7eda7686 ("drm: omapdrm: dispc:
Pass DISPC pointer to remaining dispc API functions") made dpi.c use
ctx->pll even when there's no PLL, causing a crash at modeset on AM4
EVM, and presumably all OMAP2/3 boards.
Fix this by having struct dpi_data pointer in the ctx instead, giving
access to dispc without going through the pll.
Fixes: 8a7eda7686 ("drm: omapdrm: dispc: Pass DISPC pointer to remaining dispc API functions")
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reported-by: Keerthy <j-keerthy@ti.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Tested-by: Keerthy <j-keerthy@ti.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180405065537.29818-1-tomi.valkeinen@ti.com
Modify Nuvoton NPCM7xx device tree structure by adding
nuvoton common nNPCM7xx device tree structure that
include all common modules.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Modify clock binding in a common device tree for all Nuvoton
NPCM750 BMCs.
Modify NPCM750 modules clock numbers accourding the new
clock driver.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Modify timer register size in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Modify UART compatible name in a common device tree for all Nuvoton
NPCM750 BMCs.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add watchdog device node to a common device tree for all Nuvoton
NPCM750 BMCs and a board specific device tree for the NPCM750 (Poleg)
evaluation board.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9vcj
-----END PGP SIGNATURE-----
Merge tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci into next/soc
Pull "DaVinci SoC update fixes for v4.17" from Sekhar Nori:
A fix and a clean-up patch for content previously queued for v4.17.
* tag 'davinci-for-v4.17/soc-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/nsekhar/linux-davinci:
ARM: davinci: da8xx: simplify CFGCHIP regmap_config
ARM: davinci: da8xx: fix oops in USB PHY driver due to stack allocated platform_data
Synaptics has acquired the Multimedia Solutions Business of Marvell[1].
So change the berlin entry name and move it to its alphabetical
location. We move to ARM/Synaptics instead of ARM/Marvell.
This patch also updates my email address from marvell to synaptics.
[1] https://www.synaptics.com/company/news/conexant-marvell
Signed-off-by: Jisheng Zhang <Jisheng.Zhang@synaptics.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When CONFIG_CACHE_L2X0 is disabled, the am43xx specific suspend
implemnentation fails to link:
arch/arm/mach-omap2/sleep43xx.o: In function `get_l2cache_base':
(.text+0x180): undefined reference to `omap4_get_l2cache_base'
This adds an #ifdef protection around the code, like we do for am44xx.
Fixes: 41d37e6137 ("ARM: OMAP2+: Introduce low-level suspend code for AM43XX")
Acked-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For some as yet not understood reason, Tony gets unaligned access
traps on IA64 because of:
struct util_est ue = READ_ONCE(p->se.avg.util_est);
and:
WRITE_ONCE(p->se.avg.util_est, ue);
introduced by commit:
d519329f72 ("sched/fair: Update util_est only on util_avg updates")
Normally those two fields should end up on an 8-byte aligned location,
but UP and RANDSTRUCT can mess that up so enforce the alignment
explicitly.
Also make the alignment on sched_avg unconditional, as it is really
about data locality, not false-sharing.
With or without this patch the layout for sched_avg on a
ia64-defconfig build looks like:
$ pahole -EC sched_avg ia64-defconfig/kernel/sched/core.o
die__process_function: tag not supported (INVALID)!
struct sched_avg {
/* typedef u64 */ long long unsigned int last_update_time; /* 0 8 */
/* typedef u64 */ long long unsigned int load_sum; /* 8 8 */
/* typedef u64 */ long long unsigned int runnable_load_sum; /* 16 8 */
/* typedef u32 */ unsigned int util_sum; /* 24 4 */
/* typedef u32 */ unsigned int period_contrib; /* 28 4 */
long unsigned int load_avg; /* 32 8 */
long unsigned int runnable_load_avg; /* 40 8 */
long unsigned int util_avg; /* 48 8 */
struct util_est {
unsigned int enqueued; /* 56 4 */
unsigned int ewma; /* 60 4 */
} util_est; /* 56 8 */
/* --- cacheline 1 boundary (64 bytes) --- */
/* size: 64, cachelines: 1, members: 9 */
};
Reported-and-Tested-by: Tony Luck <tony.luck@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mel Gorman <mgorman@techsingularity.net>
Cc: Norbert Manthey <nmanthey@amazon.de>
Cc: Patrick Bellasi <patrick.bellasi@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony <tony.luck@intel.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Fixes: d519329f72 ("sched/fair: Update util_est only on util_avg updates")
Link: http://lkml.kernel.org/r/20180405080521.GG4129@hirez.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Consistently use types provided by <linux/types.h> to fix the following
asm/bootparam.h userspace compilation errors:
/usr/include/asm/bootparam.h:140:2: error: unknown type name 'u16'
u16 version;
/usr/include/asm/bootparam.h:141:2: error: unknown type name 'u16'
u16 compatible_version;
/usr/include/asm/bootparam.h:142:2: error: unknown type name 'u16'
u16 pm_timer_address;
/usr/include/asm/bootparam.h:143:2: error: unknown type name 'u16'
u16 num_cpus;
/usr/include/asm/bootparam.h:144:2: error: unknown type name 'u64'
u64 pci_mmconfig_base;
/usr/include/asm/bootparam.h:145:2: error: unknown type name 'u32'
u32 tsc_khz;
/usr/include/asm/bootparam.h:146:2: error: unknown type name 'u32'
u32 apic_khz;
/usr/include/asm/bootparam.h:147:2: error: unknown type name 'u8'
u8 standard_ioapic;
/usr/include/asm/bootparam.h:148:2: error: unknown type name 'u8'
u8 cpu_ids[255];
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Jan Kiszka <jan.kiszka@siemens.com>
Cc: <stable@vger.kernel.org> # v4.16
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 4a362601ba ("x86/jailhouse: Add infrastructure for running in non-root cell")
Link: http://lkml.kernel.org/r/20180405043210.GA13254@altlinux.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
This patch removes a redundant store on regs->flags introduced
by commit:
71eb9ee959 ("perf/x86/intel: Fix linear IP of PEBS real_ip on Haswell and later CPUs")
We were clearing the PERF_EFLAGS_EXACT but it was overwritten by
regs->flags = pebs->flags later on.
The PERF_EFLAGS_EXACT is a software flag using bit 3 of regs->flags.
X86 marks this bit as Reserved. To make sure this bit is zero before
we do any IP processing, we clear it explicitly.
Patch also removes the following assignment:
regs->flags = pebs->flags | (regs->flags & PERF_EFLAGS_VM);
Because there is no regs->flags to preserve anymore because
set_linear_ip() is not called until later.
Signed-off-by: Stephane Eranian <eranian@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: kan.liang@intel.com
Link: http://lkml.kernel.org/r/1522909791-32498-1-git-send-email-eranian@google.com
[ Improve capitalization, punctuation and clarity of comments. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
By renaming the functions we can get rid of the skip parameter
and have better code redability. It makes zero sense to have
things such as:
rq_clock_skip_update(rq, false)
When the skip request is in fact not going to happen. Ever. Rename
things such that we end up with:
rq_clock_skip_update(rq)
rq_clock_cancel_skipupdate(rq)
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Cc: matt@codeblueprint.co.uk
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180404161539.nhadkff2aats74jh@linux-n805
Signed-off-by: Ingo Molnar <mingo@kernel.org>
While running rt-tests' pi_stress program I got the following splat:
rq->clock_update_flags < RQCF_ACT_SKIP
WARNING: CPU: 27 PID: 0 at kernel/sched/sched.h:960 assert_clock_updated.isra.38.part.39+0x13/0x20
[...]
<IRQ>
enqueue_top_rt_rq+0xf4/0x150
? cpufreq_dbs_governor_start+0x170/0x170
sched_rt_rq_enqueue+0x65/0x80
sched_rt_period_timer+0x156/0x360
? sched_rt_rq_enqueue+0x80/0x80
__hrtimer_run_queues+0xfa/0x260
hrtimer_interrupt+0xcb/0x220
smp_apic_timer_interrupt+0x62/0x120
apic_timer_interrupt+0xf/0x20
</IRQ>
[...]
do_idle+0x183/0x1e0
cpu_startup_entry+0x5f/0x70
start_secondary+0x192/0x1d0
secondary_startup_64+0xa5/0xb0
We can get rid of it be the "traditional" means of adding an
update_rq_clock() call after acquiring the rq->lock in
do_sched_rt_period_timer().
The case for the RT task throttling (which this workload also hits)
can be ignored in that the skip_update call is actually bogus and
quite the contrary (the request bits are removed/reverted).
By setting RQCF_UPDATED we really don't care if the skip is happening
or not and will therefore make the assert_clock_updated() check happy.
Signed-off-by: Davidlohr Bueso <dbueso@suse.de>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: dave@stgolabs.net
Cc: linux-kernel@vger.kernel.org
Cc: rostedt@goodmis.org
Link: http://lkml.kernel.org/r/20180402164954.16255-1-dave@stgolabs.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
POWER8 restores AMOR when waking from deep sleep, but POWER9 does not,
because it does not go through the subcore restore.
Have POWER9 restore it in core restore.
Fixes: ee97b6b99f ("powerpc/mm/radix: Setup AMOR in HV mode to allow key 0")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The CPU_FTR_POWER9_DD2_1 flag is intended to be set for DD2.1 and
above (which is what the dt_cpu_ftrs setup does). Fix cputable for
DD2.2 to match.
This came about due to patches b5af4f2793 ("powerpc: Add CPU feature
bits for TM bug workarounds on POWER9 v2.2"), and 9e9626ed3a
("powerpc/64s: Fix POWER9 DD2.2 and above in DT CPU features") being
in-flight at once. The latter patch fixed dt_cpu_ftrs like this one
does. The former changed cputable to match dt_cpu_ftrs.
Fixes: b5af4f2793 ("powerpc: Add CPU feature bits for TM bug workarounds on POWER9 v2.2")
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The pkey code added a CPU_FTR_PKEY bit, but did not add it to the
dt_cpu_ftrs feature set. Although capability is supported by all
processors in the base dt_cpu_ftrs set for 64s, it's a significant
and sufficiently well defined feature to make it optional. So add
it as a quirk for now, which can be versioned out then controlled
by the firmware (once dt_cpu_ftrs gains versioning support).
Fixes: cf43d3b264 ("powerpc: Enable pkey subsystem")
Cc: stable@vger.kernel.org # v4.16+
Cc: Ram Pai <linuxram@us.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Presently the dt_cpu_ftrs restore_cpu will only add bits to the LPCR
for secondaries, but some bits must be removed (e.g., UPRT for HPT).
Not clearing these bits on secondaries causes checkstops when booting
with disable_radix.
restore_cpu can not just set LPCR, because it is also called by the
idle wakeup code which relies on opal_slw_set_reg to restore the value
of LPCR, at least on P8 which does not save LPCR to stack in the idle
code.
Fix this by including a mask of bits to clear from LPCR as well, which
is used by restore_cpu.
This is a little messy now, but it's a minimal fix that can be
backported. Longer term, the idle SPR save/restore code can be
reworked to completely avoid calls to restore_cpu, then restore_cpu
would be able to unconditionally set LPCR to match boot processor
environment.
Fixes: 5a61ef74f2 ("powerpc/64s: Support new device tree binding for discovering CPU features")
Cc: stable@vger.kernel.org # v4.12+
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
