John Garry reported a deadlock that occurs when trying to access a
runtime-suspended SATA device. For obscure reasons, the rescan procedure
causes the link to be hard-reset, which disconnects the device.
The rescan tries to carry out a runtime resume when accessing the device.
scsi_rescan_device() holds the SCSI device lock and won't release it until
it can put commands onto the device's block queue. This can't happen until
the queue is successfully runtime-resumed or the device is unregistered.
But the runtime resume fails because the device is disconnected, and
__scsi_remove_device() can't do the unregistration because it can't get the
device lock.
The best way to resolve this deadlock appears to be to allow the block
queue to start running again even after an unsuccessful runtime resume.
The idea is that the driver or the SCSI error handler will need to be able
to use the queue to resolve the runtime resume failure.
This patch removes the err argument to blk_post_runtime_resume() and makes
the routine act as though the resume was successful always. This fixes the
deadlock.
Link: https://lore.kernel.org/r/1639999298-244569-4-git-send-email-chenxiang66@hisilicon.com
Fixes: e27829dc92 ("scsi: serialize ->rescan against ->remove")
Reported-and-tested-by: John Garry <john.garry@huawei.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Xiang Chen <chenxiang66@hisilicon.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
timer delivery stops working for a new child task because copy_process()
copies state information which is only valid for the parent task.
-----BEGIN PGP SIGNATURE-----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=EBbc
-----END PGP SIGNATURE-----
Merge tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"A single fix for POSIX CPU timers to address a problem where POSIX CPU
timer delivery stops working for a new child task because
copy_process() copies state information which is only valid for the
parent task"
* tag 'timers-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
posix-cpu-timers: Clear task::posix_cputimers_work in copy_process()
- Core code:
A regression fix for the Open Firmware interrupt mapping code where a
interrupt controller property in a node caused a map property in the
same node to be ignored.
- Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which silently
ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
- PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse the
chip comes out of reset with all MSI entries masked, which due to the
missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code.
-----BEGIN PGP SIGNATURE-----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=LBQL
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fixes from Thomas Gleixner:
"A set of fixes for the interrupt subsystem
Core code:
- A regression fix for the Open Firmware interrupt mapping code where
a interrupt controller property in a node caused a map property in
the same node to be ignored.
Interrupt chip drivers:
- Workaround a limitation in SiFive PLIC interrupt chip which
silently ignores an EOI when the interrupt line is masked.
- Provide the missing mask/unmask implementation for the CSKY MP
interrupt controller.
PCI/MSI:
- Prevent a use after free when PCI/MSI interrupts are released by
destroying the sysfs entries before freeing the memory which is
accessed in the sysfs show() function.
- Implement a mask quirk for the Nvidia ION AHCI chip which does not
advertise masking capability despite implementing it. Even worse
the chip comes out of reset with all MSI entries masked, which due
to the missing masking capability never get unmasked.
- Move the check which prevents accessing the MSI[X] masking for XEN
back into the low level accessors. The recent consolidation missed
that these accessors can be invoked from places which do not have
that check which broke XEN. Move them back to he original place
instead of sprinkling tons of these checks all over the code"
* tag 'irq-urgent-2021-11-14' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
of/irq: Don't ignore interrupt-controller when interrupt-map failed
irqchip/sifive-plic: Fixup EOI failed when masked
irqchip/csky-mpintc: Fixup mask/unmask implementation
PCI/MSI: Destroy sysfs before freeing entries
PCI: Add MSI masking quirk for Nvidia ION AHCI
PCI/MSI: Deal with devices lying about their MSI mask capability
PCI/MSI: Move non-mask check back into low level accessors
the preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix a
booting of Xen PV guests
-----BEGIN PGP SIGNATURE-----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=s2MX
-----END PGP SIGNATURE-----
Merge tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull scheduler fixes from Borislav Petkov:
- Avoid touching ~100 config files in order to be able to select the
preemption model
- clear cluster CPU masks too, on the CPU unplug path
- prevent use-after-free in cfs
- Prevent a race condition when updating CPU cache domains
- Factor out common shared part of smp_prepare_cpus() into a common
helper which can be called by both baremetal and Xen, in order to fix
a booting of Xen PV guests
* tag 'sched_urgent_for_v5.16_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
preempt: Restore preemption model selection configs
arch_topology: Fix missing clear cluster_cpumask in remove_cpu_topology()
sched/fair: Prevent dead task groups from regaining cfs_rq's
sched/core: Mitigate race cpus_share_cache()/update_top_cache_domain()
x86/smp: Factor out parts of native_smp_prepare_cpus()
This PR includes 5 commits that update the zstd library version:
1. Adds a new kernel-style wrapper around zstd. This wrapper API
is functionally equivalent to the subset of the current zstd API that is
currently used. The wrapper API changes to be kernel style so that the symbols
don't collide with zstd's symbols. The update to zstd-1.4.10 maintains the same
API and preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are zero
functional changes.
2. Adds an indirection for `lib/decompress_unzstd.c` so it
doesn't depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
3. Imports the zstd-1.4.10 source code. This commit is automatically generated
from upstream zstd (https://github.com/facebook/zstd).
4. Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
5. Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've included a
FAQ-style summary of the history of the patchset, and why we are taking this
approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is was released
August 20, 2017. Since then zstd has seen many bug fixes and performance
improvements. And, importantly, upstream zstd is continuously fuzzed by OSS-Fuzz,
and bug fixes aren't backported to older versions. So the only way to sanely get
these fixes is to keep up to date with upstream zstd. There are no known security
issues that affect the kernel, but we need to be able to update in case there
are. And while there are no known security issues, there are relevant bug fixes.
For example the problem with large kernel decompression has been fixed upstream
for over 2 years https://lkml.org/lkml/2020/9/29/27.
Additionally the performance improvements for kernel use cases are significant.
Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming down the
line in the next zstd release, and the new automated update patch generation
will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version. Then the
3rd patch in the series imports upstream zstd into the kernel. This patch is
automatically generated from upstream. A script makes the necessary changes and
imports it into the kernel. The changes are:
- Replace all libc dependencies with kernel replacements and rewrite includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous integration.
When we cut a new zstd release, we will submit a patch to the kernel to update
the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd up to
date. The current zstd in the kernel shares the guts of the code, but has a lot
of API and minor changes to work in the kernel. This is because at the time
upstream zstd was not ready to be used in the kernel envrionment as-is. But,
since then upstream zstd has evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is restructuring
the code, so it both deletes the existing zstd, and re-adds the new structure.
Future updates will be directly proportional to the changes in upstream zstd
since the last import. They will admittidly be large, as zstd is an actively
developed project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is not feasible
for several reasons:
- There are over 3500 upstream commits since the zstd version in the kernel.
- The automation to automatically generate the kernel update was only added recently,
so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have bugs that were
fixed before a release.
Another option to reduce the patch size would be to first reorganize to the new
file structure, and then apply the patch. However, the current kernel zstd is formatted
with clang-format to be more "kernel-like". But, the new method imports zstd as-is,
without additional formatting, to allow for closer correlation with upstream, and
easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit going
forward. Upstream zstd doesn't support production use cases running of the
development branch. We have a lot of post-commit fuzzing that catches many bugs,
so indiviudal commits may be buggy, but fixed before a release. So going forward,
I intend to import every (important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously, there was no tree
for zstd patches. Because of that, there were several patches that either got ignored,
or took a long time to merge, since it wasn't clear which tree should pick them up.
I'm officially stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the kernel zstd get
ported upstream, so they aren't erased when the next version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS, Kernel,
InitRAMFS). I also tested Kernel & InitRAMFS on i386 and aarch64. I checked both
performance and correctness.
Also, thanks to many people in the community who have tested these patches locally.
If you have tested the patches, please reply with a Tested-By so I can collect them
for the PR I will send to Linus.
Lastly, this code will bake in linux-next before being merged into v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the latest
release when it was created. Since the update patch is automatically generated
from upstream, I could generate it from zstd-1.5.0. However, there were some
large stack usage regressions in zstd-1.5.0, and are only fixed in the latest
development branch. And the latest development branch contains some new code that
needs to bake in the fuzzer before I would feel comfortable releasing to the
kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we can update
the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release is an
artifical release based off of zstd-1.4.9, with some fixes for the kernel
backported from the development branch. I will tag the zstd-1.4.10 release after
this patchset is merged, so the Linux Kernel is running a known version of zstd
that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the upstream zstd
API. It first added a shim API that supported the new upstream API with the old
code, then updated callers to use the new shim API, then transitioned to the
new code and deleted the shim API. However, Cristoph Hellwig suggested that we
transition to a kernel style API, and hide zstd's upstream API behind that.
This is because zstd's upstream API is supports many other use cases, and does
not follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set.
The largest changes in the design of the patchset are driven by the discussions
in V11, V5, and V1. Sorry for the mix of links, I couldn't find most of the the
threads on lkml.org.
V12: https://www.spinics.net/lists/linux-crypto/msg58189.html
V11: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/
V10: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/
V9: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/
V8: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/
V7: https://lkml.org/lkml/2020/12/3/1195
V6: https://lkml.org/lkml/2020/12/2/1245
V5: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
V4: https://www.spinics.net/lists/linux-btrfs/msg105783.html
V3: https://lkml.org/lkml/2020/9/23/1074
V2: https://www.spinics.net/lists/linux-btrfs/msg105505.html
V1: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
-----BEGIN PGP SIGNATURE-----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=Xb18
-----END PGP SIGNATURE-----
Merge tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux
Pull zstd update from Nick Terrell:
"Update to zstd-1.4.10.
Add myself as the maintainer of zstd and update the zstd version in
the kernel, which is now 4 years out of date, to a much more recent
zstd release. This includes bug fixes, much more extensive fuzzing,
and performance improvements. And generates the kernel zstd
automatically from upstream zstd, so it is easier to keep the zstd
verison up to date, and we don't fall so far out of date again.
This includes 5 commits that update the zstd library version:
- Adds a new kernel-style wrapper around zstd.
This wrapper API is functionally equivalent to the subset of the
current zstd API that is currently used. The wrapper API changes to
be kernel style so that the symbols don't collide with zstd's
symbols. The update to zstd-1.4.10 maintains the same API and
preserves the semantics, so that none of the callers need to be
updated. All callers are updated in the commit, because there are
zero functional changes.
- Adds an indirection for `lib/decompress_unzstd.c` so it doesn't
depend on the layout of `lib/zstd/` to include every source file.
This allows the next patch to be automatically generated.
- Imports the zstd-1.4.10 source code. This commit is automatically
generated from upstream zstd (https://github.com/facebook/zstd).
- Adds me (terrelln@fb.com) as the maintainer of `lib/zstd`.
- Fixes a newly added build warning for clang.
The discussion around this patchset has been pretty long, so I've
included a FAQ-style summary of the history of the patchset, and why
we are taking this approach.
Why do we need to update?
-------------------------
The zstd version in the kernel is based off of zstd-1.3.1, which is
was released August 20, 2017. Since then zstd has seen many bug fixes
and performance improvements. And, importantly, upstream zstd is
continuously fuzzed by OSS-Fuzz, and bug fixes aren't backported to
older versions. So the only way to sanely get these fixes is to keep
up to date with upstream zstd.
There are no known security issues that affect the kernel, but we need
to be able to update in case there are. And while there are no known
security issues, there are relevant bug fixes. For example the problem
with large kernel decompression has been fixed upstream for over 2
years [1]
Additionally the performance improvements for kernel use cases are
significant. Measured for x86_64 on my Intel i9-9900k @ 3.6 GHz:
- BtrFS zstd compression at levels 1 and 3 is 5% faster
- BtrFS zstd decompression+read is 15% faster
- SquashFS zstd decompression+read is 15% faster
- F2FS zstd compression+write at level 3 is 8% faster
- F2FS zstd decompression+read is 20% faster
- ZRAM decompression+read is 30% faster
- Kernel zstd decompression is 35% faster
- Initramfs zstd decompression+build is 5% faster
On top of this, there are significant performance improvements coming
down the line in the next zstd release, and the new automated update
patch generation will allow us to pull them easily.
How is the update patch generated?
----------------------------------
The first two patches are preparation for updating the zstd version.
Then the 3rd patch in the series imports upstream zstd into the
kernel. This patch is automatically generated from upstream. A script
makes the necessary changes and imports it into the kernel. The
changes are:
- Replace all libc dependencies with kernel replacements and rewrite
includes.
- Remove unncessary portability macros like: #if defined(_MSC_VER).
- Use the kernel xxhash instead of bundling it.
This automation gets tested every commit by upstream's continuous
integration. When we cut a new zstd release, we will submit a patch to
the kernel to update the zstd version in the kernel.
The automated process makes it easy to keep the kernel version of zstd
up to date. The current zstd in the kernel shares the guts of the
code, but has a lot of API and minor changes to work in the kernel.
This is because at the time upstream zstd was not ready to be used in
the kernel envrionment as-is. But, since then upstream zstd has
evolved to support being used in the kernel as-is.
Why are we updating in one big patch?
-------------------------------------
The 3rd patch in the series is very large. This is because it is
restructuring the code, so it both deletes the existing zstd, and
re-adds the new structure. Future updates will be directly
proportional to the changes in upstream zstd since the last import.
They will admittidly be large, as zstd is an actively developed
project, and has hundreds of commits between every release. However,
there is no other great alternative.
One option ruled out is to replay every upstream zstd commit. This is
not feasible for several reasons:
- There are over 3500 upstream commits since the zstd version in the
kernel.
- The automation to automatically generate the kernel update was only
added recently, so older commits cannot easily be imported.
- Not every upstream zstd commit builds.
- Only zstd releases are "supported", and individual commits may have
bugs that were fixed before a release.
Another option to reduce the patch size would be to first reorganize
to the new file structure, and then apply the patch. However, the
current kernel zstd is formatted with clang-format to be more
"kernel-like". But, the new method imports zstd as-is, without
additional formatting, to allow for closer correlation with upstream,
and easier debugging. So the patch wouldn't be any smaller.
It also doesn't make sense to import upstream zstd commit by commit
going forward. Upstream zstd doesn't support production use cases
running of the development branch. We have a lot of post-commit
fuzzing that catches many bugs, so indiviudal commits may be buggy,
but fixed before a release. So going forward, I intend to import every
(important) zstd release into the Kernel.
So, while it isn't ideal, updating in one big patch is the only patch
I see forward.
Who is responsible for this code?
---------------------------------
I am. This patchset adds me as the maintainer for zstd. Previously,
there was no tree for zstd patches. Because of that, there were
several patches that either got ignored, or took a long time to merge,
since it wasn't clear which tree should pick them up. I'm officially
stepping up as maintainer, and setting up my tree as the path through
which zstd patches get merged. I'll make sure that patches to the
kernel zstd get ported upstream, so they aren't erased when the next
version update happens.
How is this code tested?
------------------------
I tested every caller of zstd on x86_64 (BtrFS, ZRAM, SquashFS, F2FS,
Kernel, InitRAMFS). I also tested Kernel & InitRAMFS on i386 and
aarch64. I checked both performance and correctness.
Also, thanks to many people in the community who have tested these
patches locally.
Lastly, this code will bake in linux-next before being merged into
v5.16.
Why update to zstd-1.4.10 when zstd-1.5.0 has been released?
------------------------------------------------------------
This patchset has been outstanding since 2020, and zstd-1.4.10 was the
latest release when it was created. Since the update patch is
automatically generated from upstream, I could generate it from
zstd-1.5.0.
However, there were some large stack usage regressions in zstd-1.5.0,
and are only fixed in the latest development branch. And the latest
development branch contains some new code that needs to bake in the
fuzzer before I would feel comfortable releasing to the kernel.
Once this patchset has been merged, and we've released zstd-1.5.1, we
can update the kernel to zstd-1.5.1, and exercise the update process.
You may notice that zstd-1.4.10 doesn't exist upstream. This release
is an artifical release based off of zstd-1.4.9, with some fixes for
the kernel backported from the development branch. I will tag the
zstd-1.4.10 release after this patchset is merged, so the Linux Kernel
is running a known version of zstd that can be debugged upstream.
Why was a wrapper API added?
----------------------------
The first versions of this patchset migrated the kernel to the
upstream zstd API. It first added a shim API that supported the new
upstream API with the old code, then updated callers to use the new
shim API, then transitioned to the new code and deleted the shim API.
However, Cristoph Hellwig suggested that we transition to a kernel
style API, and hide zstd's upstream API behind that. This is because
zstd's upstream API is supports many other use cases, and does not
follow the kernel style guide, while the kernel API is focused on the
kernel's use cases, and follows the kernel style guide.
Where is the previous discussion?
---------------------------------
Links for the discussions of the previous versions of the patch set
below. The largest changes in the design of the patchset are driven by
the discussions in v11, v5, and v1. Sorry for the mix of links, I
couldn't find most of the the threads on lkml.org"
Link: https://lkml.org/lkml/2020/9/29/27 [1]
Link: https://www.spinics.net/lists/linux-crypto/msg58189.html [v12]
Link: https://lore.kernel.org/linux-btrfs/20210430013157.747152-1-nickrterrell@gmail.com/ [v11]
Link: https://lore.kernel.org/lkml/20210426234621.870684-2-nickrterrell@gmail.com/ [v10]
Link: https://lore.kernel.org/linux-btrfs/20210330225112.496213-1-nickrterrell@gmail.com/ [v9]
Link: https://lore.kernel.org/linux-f2fs-devel/20210326191859.1542272-1-nickrterrell@gmail.com/ [v8]
Link: https://lkml.org/lkml/2020/12/3/1195 [v7]
Link: https://lkml.org/lkml/2020/12/2/1245 [v6]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v5]
Link: https://www.spinics.net/lists/linux-btrfs/msg105783.html [v4]
Link: https://lkml.org/lkml/2020/9/23/1074 [v3]
Link: https://www.spinics.net/lists/linux-btrfs/msg105505.html [v2]
Link: https://lore.kernel.org/linux-btrfs/20200916034307.2092020-1-nickrterrell@gmail.com/ [v1]
Signed-off-by: Nick Terrell <terrelln@fb.com>
Tested By: Paul Jones <paul@pauljones.id.au>
Tested-by: Oleksandr Natalenko <oleksandr@natalenko.name>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 on x86-64
Tested-by: Jean-Denis Girard <jd.girard@sysnux.pf>
* tag 'zstd-for-linus-v5.16' of git://github.com/terrelln/linux:
lib: zstd: Add cast to silence clang's -Wbitwise-instead-of-logical
MAINTAINERS: Add maintainer entry for zstd
lib: zstd: Upgrade to latest upstream zstd version 1.4.10
lib: zstd: Add decompress_sources.h for decompress_unzstd
lib: zstd: Add kernel-specific API
-----BEGIN PGP SIGNATURE-----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=DrMK
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-11-13' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
"Set of fixes that should go into this merge window:
- ioctl vs read data race fixes (Shin'ichiro)
- blkcg use-after-free fix (Laibin)
- Last piece of the puzzle for add_disk() error handling, enable
__must_check for (Luis)
- Request allocation fixes (Ming)
- Misc fixes (me)"
* tag 'block-5.16-2021-11-13' of git://git.kernel.dk/linux-block:
blk-mq: fix filesystem I/O request allocation
blkcg: Remove extra blkcg_bio_issue_init
block: Hold invalidate_lock in BLKRESETZONE ioctl
blk-mq: rename blk_attempt_bio_merge
blk-mq: don't grab ->q_usage_counter in blk_mq_sched_bio_merge
block: fix kerneldoc for disk_register_independent_access__ranges()
block: add __must_check for *add_disk*() callers
block: use enum type for blk_mq_alloc_data->rq_flags
block: Hold invalidate_lock in BLKZEROOUT ioctl
block: Hold invalidate_lock in BLKDISCARD ioctl
in 5.7 are now enabled by default. This should greatly speed up things
like rm, tar and rsync. To opt out, wsync mount option can be used.
Other than that we have a pile of bug fixes all across the filesystem
from Jeff, Xiubo and Kotresh and a metrics infrastructure rework from
Luis.
-----BEGIN PGP SIGNATURE-----
iQFHBAABCAAxFiEEydHwtzie9C7TfviiSn/eOAIR84sFAmGORY8THGlkcnlvbW92
QGdtYWlsLmNvbQAKCRBKf944AhHzi5XmB/0SRQTW+BRAhYvSD/Ib2/c6uVZGnmJU
MUCO/uuD4fZvfxyMVb3qnAzHIGh3YlFWa/dgSZNStvLmY0L9P0MIvyaYolVuC4Tu
7llX1I+yckTns9VmiULBNy9D812eRY282nMbRzikMGPO1eb6Yqo3r50AdTvkam/R
Qs5pfwRqLerbP7VUv4vSsrBflwVyHOrCFZaUUVTu4f2kKz/FzZd/FCw5VV51KYzq
ygN+8eFotf5zluMX0tl0FXVgJ13N9vbg+YNxyOzHmOAV0AhSmmtV8vJ+j+m7+sOj
b7wNl5AuI5Ogeg8PHSGsXOHBVn6IbhdGDcougEVL+1gHkxxOQ5hfBHWQ
=22Vd
-----END PGP SIGNATURE-----
Merge tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client
Pull ceph updates from Ilya Dryomov:
"One notable change here is that async creates and unlinks introduced
in 5.7 are now enabled by default. This should greatly speed up things
like rm, tar and rsync. To opt out, wsync mount option can be used.
Other than that we have a pile of bug fixes all across the filesystem
from Jeff, Xiubo and Kotresh and a metrics infrastructure rework from
Luis"
* tag 'ceph-for-5.16-rc1' of git://github.com/ceph/ceph-client:
ceph: add a new metric to keep track of remote object copies
libceph, ceph: move ceph_osdc_copy_from() into cephfs code
ceph: clean-up metrics data structures to reduce code duplication
ceph: split 'metric' debugfs file into several files
ceph: return the real size read when it hits EOF
ceph: properly handle statfs on multifs setups
ceph: shut down mount on bad mdsmap or fsmap decode
ceph: fix mdsmap decode when there are MDS's beyond max_mds
ceph: ignore the truncate when size won't change with Fx caps issued
ceph: don't rely on error_string to validate blocklisted session.
ceph: just use ci->i_version for fscache aux info
ceph: shut down access to inode when async create fails
ceph: refactor remove_session_caps_cb
ceph: fix auth cap handling logic in remove_session_caps_cb
ceph: drop private list from remove_session_caps_cb
ceph: don't use -ESTALE as special return code in try_get_cap_refs
ceph: print inode numbers instead of pointer values
ceph: enable async dirops by default
libceph: drop ->monmap and err initialization
ceph: convert to noop_direct_IO
-----BEGIN PGP SIGNATURE-----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=K23c
-----END PGP SIGNATURE-----
Merge tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs
Pull netfs, 9p, afs and ceph (partial) foliation from David Howells:
"This converts netfslib, 9p and afs to use folios. It also partially
converts ceph so that it uses folios on the boundaries with netfslib.
To help with this, a couple of folio helper functions are added in the
first two patches.
These patches don't touch fscache and cachefiles as I intend to remove
all the code that deals with pages directly from there. Only nfs and
cifs are using the old fscache I/O API now. The new API uses iov_iter
instead.
Thanks to Jeff Layton, Dominique Martinet and AuriStor for testing and
retesting the patches"
* tag 'netfs-folio-20211111' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Use folios in directory handling
netfs, 9p, afs, ceph: Use folios
folio: Add a function to get the host inode for a folio
folio: Add a function to change the private data attached to a folio
-----BEGIN PGP SIGNATURE-----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=vK/E
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fixes from Paul Moore:
"Unfortunately I need to request a revert for two LSM/SELinux patches
that came in via the network tree. The two patches in question add a
new SCTP/LSM hook as well as an SELinux implementation of that LSM
hook. The short version of "why?" is in the commit description of the
revert patch, but I'll copy-n-paste the important bits below to save
some time for the curious:
... Unfortunately these two patches were merged without proper
review (the Reviewed-by and Tested-by tags from Richard Haines
were for previous revisions of these patches that were
significantly different) and there are outstanding objections from
the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in
the reverted patches, as well as others that have come up during
review, but it is unclear at this point in time when that work
will be ready for inclusion in the mainline kernel. In the
interest of not keeping objectionable code in the kernel for
multiple weeks, and potentially a kernel release, we are reverting
the two problematic patches.
As usual with these things there is plenty of context to go with this
and I'll try to do my best to provide that now. This effort started
with a report of SCTP client side peel-offs not working correctly with
SELinux, Ondrej Mosnacek put forth a patch which he believed properly
addressed the problem but upon review by the netdev folks Xin Long
described some additional issues and submitted an improved patchset
for review. The SELinux folks reviewed Xin Long's initial patchset and
suggested some changes which resulted in a second patchset (v2) from
Xin Long; this is the patchset that is currently in your tree.
Unfortunately this v2 patchset from Xin Long was merged before it had
spent even just 24 hours on the mailing lists during the early days of
the merge window, a time when many of us were busy doing verification
of the newly released v5.15 kernel as well final review and testing of
our v5.16 pull requests. Making matters worse, upon reviewing the v2
patchset there were both changes which were found objectionable by
SELinux standards as well as additional outstanding SCTP/SELinux
interaction problems. At this point we did two things: resumed working
on a better fix for the SCTP/SELinux issue(s) - thank you Ondrej - and
we asked the networking folks to revert the v2 patchset.
The revert request was obviously rejected, but at the time I believed
it was just going to be an issue for linux-next; I wasn't expecting
something this significant that was merged into the networking tree
during the merge window to make it into your tree in the same window,
yet as of last night that is exactly what happened. While we continue
to try and resolve the SCTP/SELinux problem I am asking once again to
revert the v2 patches and not ship the current
security_sctp_assoc_established() hook in a v5.16-rcX kernel. If I was
confident that we could solve these issues in a week, maybe two, I
would refrain from asking for the revert but our current estimate is
for a minimum of two weeks for the next patch revision. With the
likelihood of additional delays due to normal patch review follow-up
and/or holidays it seems to me that the safest course of action is to
revert the patch both to try and keep some objectionable code out of a
release kernel and limit the chances of any new breakages from such a
change. While the SCTP/SELinux code in v5.15 and earlier has problems,
they are known problems, and I'd like to try and avoid creating new
and different problems while we work to fix things properly.
One final thing to mention: Xin Long's v2 patchset consisted of four
patches, yet this revert is for only the last two. We see the first
two patches as good, reasonable, and not likely to cause an issue. In
an attempt to create a cleaner revert patch we suggest leaving the
first two patches in the tree as they are currently"
* tag 'selinux-pr-20211112' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
net,lsm,selinux: revert the security_sctp_assoc_established() hook
* Guest API and guest kernel support for SEV live migration
* SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
* Fix misuse of gfn-to-pfn cache when recording guest steal time / preempted status
* Fix selftests on APICv machines
* Fix sparse warnings
* Fix detection of KVM features in CPUID
* Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
* Fixes and cleanups for MSR bitmap handling
* Cleanups for INVPCID
* Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
* Fix finalization of host stage2 mappings
* Tighten the return value of kvm_vcpu_preferred_target()
* Make sure the extraction of ESR_ELx.EC is limited to architected bits
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmGO1usUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroOsXgf/d2CgZmTxZii/pOt0JKGSDKwRdoti
pfbmtXwTkagqg2tIJtEsxwvcc26Q2VLyg9mlEelX1I8KVlexSa8mDtbGWHLFilsc
JIZY8lE96wtlr9AyuN06K44QingDMIbXzlxcwO+muS3zTlSPsNkPcaVDk5PL35sN
Wy2GA6GCLWv6iTLCtlX5EzbcgkrR+Mypj4lGSdXGRqfBKVFOQjeVt+Q3YzOPuacS
03NBlYOmRxTnAGXfeAVs0/zEa69u/dYjBmwDPe6ERma4u8thHv0U/fDAh5C/ES7q
42Thes/JOYnEZiBQ1xZLsHqRII0achbJKZhmxqPwjRf/u6eXsfz0KY9FBg==
=kN8U
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull more kvm updates from Paolo Bonzini:
"New x86 features:
- Guest API and guest kernel support for SEV live migration
- SEV and SEV-ES intra-host migration
Bugfixes and cleanups for x86:
- Fix misuse of gfn-to-pfn cache when recording guest steal time /
preempted status
- Fix selftests on APICv machines
- Fix sparse warnings
- Fix detection of KVM features in CPUID
- Cleanups for bogus writes to MSR_KVM_PV_EOI_EN
- Fixes and cleanups for MSR bitmap handling
- Cleanups for INVPCID
- Make x86 KVM_SOFT_MAX_VCPUS consistent with other architectures
Bugfixes for ARM:
- Fix finalization of host stage2 mappings
- Tighten the return value of kvm_vcpu_preferred_target()
- Make sure the extraction of ESR_ELx.EC is limited to architected
bits"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (34 commits)
KVM: SEV: unify cgroup cleanup code for svm_vm_migrate_from
KVM: x86: move guest_pv_has out of user_access section
KVM: x86: Drop arbitrary KVM_SOFT_MAX_VCPUS
KVM: Move INVPCID type check from vmx and svm to the common kvm_handle_invpcid()
KVM: VMX: Add a helper function to retrieve the GPR index for INVPCID, INVVPID, and INVEPT
KVM: nVMX: Clean up x2APIC MSR handling for L2
KVM: VMX: Macrofy the MSR bitmap getters and setters
KVM: nVMX: Handle dynamic MSR intercept toggling
KVM: nVMX: Query current VMCS when determining if MSR bitmaps are in use
KVM: x86: Don't update vcpu->arch.pv_eoi.msr_val when a bogus value was written to MSR_KVM_PV_EOI_EN
KVM: x86: Rename kvm_lapic_enable_pv_eoi()
KVM: x86: Make sure KVM_CPUID_FEATURES really are KVM_CPUID_FEATURES
KVM: x86: Add helper to consolidate core logic of SET_CPUID{2} flows
kvm: mmu: Use fast PF path for access tracking of huge pages when possible
KVM: x86/mmu: Properly dereference rcu-protected TDP MMU sptep iterator
KVM: x86: inhibit APICv when KVM_GUESTDBG_BLOCKIRQ active
kvm: x86: Convert return type of *is_valid_rdpmc_ecx() to bool
KVM: x86: Fix recording of guest steal time / preempted status
selftest: KVM: Add intra host migration tests
selftest: KVM: Add open sev dev helper
...
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in
the schib in cio code.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE3QHqV+H2a8xAv27vjYWKoQLXFBgFAmGPwDMACgkQjYWKoQLX
FBgCoQf/VBel0vDex9NNVo59OmGTNh9NPPT2cUU8vYEmwHfaBeInZVEx5WOxXijl
8MIbEgi6Wt3EwnIghjouC50nk8jCiNOJ8Z/wG+01zZpVpLk2GvKGjxoYxKg+5E6T
sOSr7TMeKOtOp23xKAXGVIzzkrDTSyr3qruTKg/m6TFhQ0XSm/ld2k6tR5AARbuB
UtsxBOtPWyHm1xPyuhjr+c6riK2vGQwJwYya4vGtIW8ix9uZoPabdqqzWsD3meBc
B6fe96YQGxA8Tt80FtyJ6pHEhNDr8CE656aJZNJCnd7q1RmLWC1R/aUme+9wqQtO
i9YmMvc+uzgQonpo+YgWqu9fIQqcXA==
=OjW1
-----END PGP SIGNATURE-----
Merge tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux
Pull more s390 updates from Vasily Gorbik:
- Add PCI automatic error recovery.
- Fix tape driver timer initialization broken during timers api
cleanup.
- Fix bogus CPU measurement counters values on CPUs offlining.
- Check the validity of subchanel before reading other fields in the
schib in cio code.
* tag 's390-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/cio: check the subchannel validity for dev_busid
s390/cpumf: cpum_cf PMU displays invalid value after hotplug remove
s390/tape: fix timer initialization in tape_std_assign()
s390/pci: implement minimal PCI error recovery
PCI: Export pci_dev_lock()
s390/pci: implement reset_slot for hotplug slot
s390/pci: refresh function handle in iomap
This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle.
-----BEGIN PGP SIGNATURE-----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=KmUV
-----END PGP SIGNATURE-----
Merge tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm
Pull pwm updates from Thierry Reding:
"This set is mostly small fixes and cleanups, so more of a janitorial
update for this cycle"
* tag 'pwm/for-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thierry.reding/linux-pwm:
pwm: vt8500: Rename pwm_busy_wait() to make it obviously driver-specific
dt-bindings: pwm: tpu: Add R-Car M3-W+ device tree bindings
dt-bindings: pwm: tpu: Add R-Car V3U device tree bindings
pwm: pwm-samsung: Trigger manual update when disabling PWM
pwm: visconti: Simplify using devm_pwmchip_add()
pwm: samsung: Describe driver in Kconfig
pwm: Make it explicit that pwm_apply_state() might sleep
pwm: Add might_sleep() annotations for !CONFIG_PWM API functions
pwm: atmel: Drop unused header
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEEKbZHaGwW9KfbeusDHTzWXnEhr4FAmGN3YwACgkQDHTzWXnE
hr6aZQ/+Pobf1VE7V3wPUcopxccJYmgBvG/uY8EDyjA8qaxHs2pQqGN2IooOGxr6
F8G1N94Hem/PCDn3T8JI2Tqw5z4sy4UwLahEWISurFCen1IMAfA7hYfutp9X3O7X
8h7b+PgkvVruEAHF7z0kqnWGPHmcro29cIHNkXVRjnJuz+Gmn1XRfo6Jj65n6D7u
NfMeU4/lWRR3767oJQzTqyAYtGxsKaZT3/tBD5WggZBzEKC7hqhAl8EUoOLWwojo
fDqwiEpLXpraPRIQH8trkXVHhzPeLAmG916WwS8JG3CEk9mUQ+I7Jshhd8cw+bsQ
XPuk3OBfU9mtuiGgNzrLP3xXJZs/QN3EkpKZWLefTnJY+C4BgiP2RifTnghmwV31
6/7Pr83CX/cn3BRd7r0xaeBZYvVYBZmwoZcsZFJBM8SVjd/ofKUfAmCzZZKheio2
5qa6bj9DQoyjEoFAULh23plcX6hvATGP7wzfRTnJ9AlAJ0KyEjVJ3r0qE6jHMDc/
uzcTAnKIWCxt9kSgE5qwLQtxLBaBpr/iOniZbCqGkPjiZeMzqP/ug1AKVP7kk39x
FxZVT8ZOKk8Xt4iLZx8jmHi2KKheXYZi9LqieoTrJd44qMXDOmR9DCtQX9FZuWJS
EJAlMj6sCowAZdODPZMVpoMc3Gti9nZ2Fpu7mLrRcMk1gKfjKwo=
=qMNk
-----END PGP SIGNATURE-----
Merge tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm
Pull more drm updates from Dave Airlie:
"I missed a drm-misc-next pull for the main pull last week. It wasn't
that major and isn't the bulk of this at all. This has a bunch of
fixes all over, a lot for amdgpu and i915.
bridge:
- HPD improvments for lt9611uxc
- eDP aux-bus support for ps8640
- LVDS data-mapping selection support
ttm:
- remove huge page functionality (needs reworking)
- fix a race condition during BO eviction
panels:
- add some new panels
fbdev:
- fix double-free
- remove unused scrolling acceleration
- CONFIG_FB dep improvements
locking:
- improve contended locking logging
- naming collision fix
dma-buf:
- add dma_resv_for_each_fence iterator
- fix fence refcounting bug
- name locking fixesA
prime:
- fix object references during mmap
nouveau:
- various code style changes
- refcount fix
- device removal fixes
- protect client list with a mutex
- fix CE0 address calculation
i915:
- DP rates related fixes
- Revert disabling dual eDP that was causing state readout problems
- put the cdclk vtables in const data
- Fix DVO port type for older platforms
- Fix blankscreen by turning DP++ TMDS output buffers on encoder->shutdown
- CCS FBs related fixes
- Fix recursive lock in GuC submission
- Revert guc_id from i915_request tracepoint
- Build fix around dmabuf
amdgpu:
- GPU reset fix
- Aldebaran fix
- Yellow Carp fixes
- DCN2.1 DMCUB fix
- IOMMU regression fix for Picasso
- DSC display fixes
- BPC display calculation fixes
- Other misc display fixes
- Don't allow partial copy from user for DC debugfs
- SRIOV fixes
- GFX9 CSB pin count fix
- Various IP version check fixes
- DP 2.0 fixes
- Limit DCN1 MPO fix to DCN1
amdkfd:
- SVM fixes
- Fix gfx version for renoir
- Reset fixes
udl:
- timeout fix
imx:
- circular locking fix
virtio:
- NULL ptr deref fix"
* tag 'drm-next-2021-11-12' of git://anongit.freedesktop.org/drm/drm: (126 commits)
drm/ttm: Double check mem_type of BO while eviction
drm/amdgpu: add missed support for UVD IP_VERSION(3, 0, 64)
drm/amdgpu: drop jpeg IP initialization in SRIOV case
drm/amd/display: reject both non-zero src_x and src_y only for DCN1x
drm/amd/display: Add callbacks for DMUB HPD IRQ notifications
drm/amd/display: Don't lock connection_mutex for DMUB HPD
drm/amd/display: Add comment where CONFIG_DRM_AMD_DC_DCN macro ends
drm/amdkfd: Fix retry fault drain race conditions
drm/amdkfd: lower the VAs base offset to 8KB
drm/amd/display: fix exit from amdgpu_dm_atomic_check() abruptly
drm/amd/amdgpu: fix the kfd pre_reset sequence in sriov
drm/amdgpu: fix uvd crash on Polaris12 during driver unloading
drm/i915/adlp/fb: Prevent the mapping of redundant trailing padding NULL pages
drm/i915/fb: Fix rounding error in subsampled plane size calculation
drm/i915/hdmi: Turn DP++ TMDS output buffers back on in encoder->shutdown()
drm/locking: fix __stack_depot_* name conflict
drm/virtio: Fix NULL dereference error in virtio_gpu_poll
drm/amdgpu: fix SI handling in amdgpu_device_asic_has_dc_support()
drm/amdgpu: Fix dangling kfd_bo pointer for shared BOs
drm/amd/amdkfd: Don't sent command to HWS on kfd reset
...
Pull input updates from Dmitry Torokhov:
"Just one new driver (Cypress StreetFighter touchkey), and no input
core changes this time.
Plus various fixes and enhancements to existing drivers"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (54 commits)
Input: iforce - fix control-message timeout
Input: wacom_i2c - use macros for the bit masks
Input: ili210x - reduce sample period to 15ms
Input: ili210x - improve polled sample spacing
Input: ili210x - special case ili251x sample read out
Input: elantench - fix misreporting trackpoint coordinates
Input: synaptics-rmi4 - Fix device hierarchy
Input: i8042 - Add quirk for Fujitsu Lifebook T725
Input: cap11xx - add support for cap1206
Input: remove unused header <linux/input/cy8ctmg110_pdata.h>
Input: ili210x - add ili251x firmware update support
Input: ili210x - export ili251x version details via sysfs
Input: ili210x - use resolution from ili251x firmware
Input: pm8941-pwrkey - respect reboot_mode for warm reset
reboot: export symbol 'reboot_mode'
Input: max77693-haptic - drop unneeded MODULE_ALIAS
Input: cpcap-pwrbutton - do not set input parent explicitly
Input: max8925_onkey - don't mark comment as kernel-doc
Input: ads7846 - do not attempt IRQ workaround when deferring probe
Input: ads7846 - use input_set_capability()
...
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes backup
switch mode
- Expose available features to userspace, in particular, when alarmas have a
resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset
-----BEGIN PGP SIGNATURE-----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=pTlj
-----END PGP SIGNATURE-----
Merge tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux
Pull RTC updates from Alexandre Belloni:
"This includes new ioctls to get and set parameters and in particular
the backup switch mode that is needed for some RTCs to actually enable
the backup voltage (and have a useful RTC).
The same interface can also be used to get the actual features
supported by the RTC so userspace has a better way than trying and
failing.
Summary:
Subsystem:
- Add new ioctl to get and set extra RTC parameters, this includes
backup switch mode
- Expose available features to userspace, in particular, when alarmas
have a resolution of one minute instead of a second.
- Let the core handle those alarms with a minute resolution
New driver:
- MSTAR MSC313 RTC
Drivers:
- Add SPI ID table where necessary
- Add BSM support for rv3028, rv3032 and pcf8523
- s3c: set RTC range
- rx8025: set range, implement .set_offset and .read_offset"
* tag 'rtc-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: rx8025: use .set_offset/.read_offset
rtc: rx8025: use rtc_add_group
rtc: rx8025: clear RTC_FEATURE_ALARM when alarm are not supported
rtc: rx8025: set range
rtc: rx8025: let the core handle the alarm resolution
rtc: rx8025: switch to devm_rtc_allocate_device
rtc: ab8500: let the core handle the alarm resolution
rtc: ab-eoz9: support UIE when available
rtc: ab-eoz9: use RTC_FEATURE_UPDATE_INTERRUPT
rtc: rv3032: let the core handle the alarm resolution
rtc: s35390a: let the core handle the alarm resolution
rtc: handle alarms with a minute resolution
rtc: pcf85063: silence cppcheck warning
rtc: rv8803: fix writing back ctrl in flag register
rtc: s3c: Add time range
rtc: s3c: Extract read/write IO into separate functions
rtc: s3c: Remove usage of devm_rtc_device_register()
rtc: tps80031: Remove driver
rtc: sun6i: Allow probing without an early clock provider
rtc: pcf8523: add BSM support
...
Second round of updates for libata for 5.16:
* Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
revalidation after a resume or a modprobe of the LLDD (from me).
* Remove unnecessary error message in sata_highbank driver (from Xu).
* Better handling of accesses to the IDENTIFY DEVICE data log for drives
that do not support this log page (from me).
* Fix ahci_shost_attr_group declaration in ahci driver (from me).
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSRPv8tYSvhwAzJdzjdoc3SxdoYdgUCYY2zZQAKCRDdoc3SxdoY
dtNPAQCJ0hcF/CpDOgL2Aaw4GmANrWLxmjkKRCf3zn+Ufu4AJQD/eCWCUDZbJJbZ
JbGOY68y+pfU2peiO+CE/apFCsb+1wQ=
=WgCT
-----END PGP SIGNATURE-----
Merge tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata
Pull more libata updates from Damien Le Moal:
"Second round of updates for libata for 5.16:
- Fix READ LOG EXT and READ LOG DMA EXT command timeouts during disk
revalidation after a resume or a modprobe of the LLDD (me)
- Remove unnecessary error message in sata_highbank driver (Xu)
- Better handling of accesses to the IDENTIFY DEVICE data log for
drives that do not support this log page (me)
- Fix ahci_shost_attr_group declaration in ahci driver (me)"
* tag 'libata-5.16-rc1-p2' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/libata:
libata: libahci: declare ahci_shost_attr_group as static
libata: add horkage for missing Identify Device log
ata: sata_highbank: Remove unnecessary print function dev_err()
libata: fix read log timeout value
This patch reverts two prior patches, e7310c9402
("security: implement sctp_assoc_established hook in selinux") and
7c2ef0240e ("security: add sctp_assoc_established hook"), which
create the security_sctp_assoc_established() LSM hook and provide a
SELinux implementation. Unfortunately these two patches were merged
without proper review (the Reviewed-by and Tested-by tags from
Richard Haines were for previous revisions of these patches that
were significantly different) and there are outstanding objections
from the SELinux maintainers regarding these patches.
Work is currently ongoing to correct the problems identified in the
reverted patches, as well as others that have come up during review,
but it is unclear at this point in time when that work will be ready
for inclusion in the mainline kernel. In the interest of not keeping
objectionable code in the kernel for multiple weeks, and potentially
a kernel release, we are reverting the two problematic patches.
Signed-off-by: Paul Moore <paul@paul-moore.com>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmF/AjYeHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG1hkIAJ6sFDbvb4M4LMwf
Slh2NVL9o5sLMBDzVwnVlyMSKDbMn1WBKreGssaLgZjGDc74lxsdSmw5l9MZm0JN
xlq95Q6XFiuu+0qDHPWwfDz3JFO4TqW2ZLLPWk9NnkNbRXqccSrlVRi1RpgE1t3/
NUtS8CQLu6A2BYMc6mkk3aV6IwSNKOkWbM5eBHSvU4j8B6lLbNQop0AfO/wyY1xB
U6LiVE1RpN/b7Yv+75ITtNzuHzVIBx6305FvSnOlKbMKKvIClt96Vd2OeuoEkK+6
wGU8JraB1+fc0GckAhynNrjWQWdvi0MAhFWWEJxjS20OGcV1rXDduNfkVNauO1Zn
+dNyJ3s=
=g9fz
-----END PGP SIGNATURE-----
BackMerge tag 'v5.15' into drm-next
I got a drm-fixes which had some 5.15 stuff in it, so to avoid
the mess just backmerge here.
Linux 5.15
Signed-off-by: Dave Airlie <airlied@redhat.com>
-----BEGIN PGP SIGNATURE-----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=0aFC
-----END PGP SIGNATURE-----
Merge tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci
Pull PCI fixes from Bjorn Helgaas:
"Revert conversion to struct device.driver instead of struct
pci_dev.driver.
The device.driver is set earlier, and using it caused the PCI core to
call driver PM entry points before .probe() and after .remove(), when
the driver isn't prepared.
This caused NULL pointer dereferences in i2c_designware_pci and
probably other driver issues"
* tag 'pci-v5.16-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
Revert "PCI: Use to_pci_driver() instead of pci_dev->driver"
Revert "PCI: Remove struct pci_dev->driver"
ACS-3 introduced the ATA Identify Device Data log as mandatory. A
warning message currently signals to the user if a device does not
report supporting this log page in the log directory page, regardless
of the ATA version of the device. Furthermore, this warning will appear
for all attempts at accessing this missing log page during device
revalidation.
Since it is useless to constantly access the log directory and warn
about this lack of support once we have discovered that the device
does not support this log page, introduce the horkage flag
ATA_HORKAGE_NO_ID_DEV_LOG to mark a device as lacking support for
the Identify Device Data log page. Set this flag when
ata_log_supported() returns false in ata_identify_page_supported().
The warning is printed only if the device ATA level is 10 or above
(ACS-3 or above), and only once on device scan. With this flag set, the
log directory page is not accessed again to test for Identify Device
Data log page support.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
This series contains initialization fixups, testing improvements, addition
of instruction pointer to data-race reports, and scoped data-race checks.
-----BEGIN PGP SIGNATURE-----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=MjQ1
-----END PGP SIGNATURE-----
Merge tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu
Pull KCSAN updates from Paul McKenney:
"This contains initialization fixups, testing improvements, addition of
instruction pointer to data-race reports, and scoped data-race checks"
* tag 'kcsan.2021.11.11a' of git://git.kernel.org/pub/scm/linux/kernel/git/paulmck/linux-rcu:
kcsan: selftest: Cleanup and add missing __init
kcsan: Move ctx to start of argument list
kcsan: Support reporting scoped read-write access type
kcsan: Start stack trace with explicit location if provided
kcsan: Save instruction pointer for scoped accesses
kcsan: Add ability to pass instruction pointer of access to reporting
kcsan: test: Fix flaky test case
kcsan: test: Use kunit_skip() to skip tests
kcsan: test: Defer kcsan_test_init() after kunit initialization
Merge more updates from Andrew Morton:
"The post-linux-next material.
7 patches.
Subsystems affected by this patch series (all mm): debug,
slab-generic, migration, memcg, and kasan"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
kasan: add kasan mode messages when kasan init
mm: unexport {,un}lock_page_memcg
mm: unexport folio_memcg_{,un}lock
mm/migrate.c: remove MIGRATE_PFN_LOCKED
mm: migrate: simplify the file-backed pages validation when migrating its mapping
mm: allow only SLUB on PREEMPT_RT
mm/page_owner.c: modify the type of argument "order" in some functions
This reverts commit b5f9c644eb.
Revert b5f9c644eb ("PCI: Remove struct pci_dev->driver"), which is needed
to revert 2a4d9408c9 ("PCI: Use to_pci_driver() instead of
pci_dev->driver").
2a4d9408c9 caused a NULL pointer dereference reported by Robert Święcki.
Details in the revert of that commit.
Fixes: 2a4d9408c9 ("PCI: Use to_pci_driver() instead of pci_dev->driver")
Link: https://lore.kernel.org/linux-i2c/CAP145pgdrdiMAT7=-iB1DMgA7t_bMqTcJL4N0=6u8kNY3EU0dw@mail.gmail.com/
Reported-by: Robert Święcki <robert@swiecki.net>
Tested-by: Robert Święcki <robert@swiecki.net>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different
from the tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit operations
to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries
to access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Ttgq
-----END PGP SIGNATURE-----
Merge tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, can and netfilter.
Current release - regressions:
- bpf: do not reject when the stack read size is different from the
tracked scalar size
- net: fix premature exit from NAPI state polling in napi_disable()
- riscv, bpf: fix RV32 broken build, and silence RV64 warning
Current release - new code bugs:
- net: fix possible NULL deref in sock_reserve_memory
- amt: fix error return code in amt_init(); fix stopping the
workqueue
- ax88796c: use the correct ioctl callback
Previous releases - always broken:
- bpf: stop caching subprog index in the bpf_pseudo_func insn
- security: fixups for the security hooks in sctp
- nfc: add necessary privilege flags in netlink layer, limit
operations to admin only
- vsock: prevent unnecessary refcnt inc for non-blocking connect
- net/smc: fix sk_refcnt underflow on link down and fallback
- nfnetlink_queue: fix OOB when mac header was cleared
- can: j1939: ignore invalid messages per standard
- bpf, sockmap:
- fix race in ingress receive verdict with redirect to self
- fix incorrect sk_skb data_end access when src_reg = dst_reg
- strparser, and tls are reusing qdisc_skb_cb and colliding
- ethtool: fix ethtool msg len calculation for pause stats
- vlan: fix a UAF in vlan_dev_real_dev() when ref-holder tries to
access an unregistering real_dev
- udp6: make encap_rcv() bump the v6 not v4 stats
- drv: prestera: add explicit padding to fix m68k build
- drv: felix: fix broken VLAN-tagged PTP under VLAN-aware bridge
- drv: mvpp2: fix wrong SerDes reconfiguration order
Misc & small latecomers:
- ipvs: auto-load ipvs on genl access
- mctp: sanity check the struct sockaddr_mctp padding fields
- libfs: support RENAME_EXCHANGE in simple_rename()
- avoid double accounting for pure zerocopy skbs"
* tag 'net-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (123 commits)
selftests/net: udpgso_bench_rx: fix port argument
net: wwan: iosm: fix compilation warning
cxgb4: fix eeprom len when diagnostics not implemented
net: fix premature exit from NAPI state polling in napi_disable()
net/smc: fix sk_refcnt underflow on linkdown and fallback
net/mlx5: Lag, fix a potential Oops with mlx5_lag_create_definer()
gve: fix unmatched u64_stats_update_end()
net: ethernet: lantiq_etop: Fix compilation error
selftests: forwarding: Fix packet matching in mirroring selftests
vsock: prevent unnecessary refcnt inc for nonblocking connect
net: marvell: mvpp2: Fix wrong SerDes reconfiguration order
net: ethernet: ti: cpsw_ale: Fix access to un-initialized memory
net: stmmac: allow a tc-taprio base-time of zero
selftests: net: test_vxlan_under_vrf: fix HV connectivity test
net: hns3: allow configure ETS bandwidth of all TCs
net: hns3: remove check VF uc mac exist when set by PF
net: hns3: fix some mac statistics is always 0 in device version V2
net: hns3: fix kernel crash when unload VF while it is being reset
net: hns3: sync rx ring head in echo common pull
net: hns3: fix pfc packet number incorrect after querying pfc parameters
...
Here are some small reverts and fixes for USB drivers for issues that
came up during the 5.16-rc1 merge window.
These include:
- two reverts of xhci and USB core patches that are causing
problems in many systems.
- xhci 3.1 enumeration delay fix for systems that were having
problems.
All 3 of these have been in linux-next all week with no reported issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYYziZw8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylXCACgpgGRQ3yKJJtWczKQy8sFrVmcuIQAn3HXWFnr
VIyCINPkC52d/k1Zj56F
=JGlS
-----END PGP SIGNATURE-----
Merge tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are some small reverts and fixes for USB drivers for issues that
came up during the 5.16-rc1 merge window.
These include:
- two reverts of xhci and USB core patches that are causing problems
in many systems.
- xhci 3.1 enumeration delay fix for systems that were having
problems.
All three of these have been in linux-next all week with no reported
issues"
* tag 'usb-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
xhci: Fix USB 3.1 enumeration issues by increasing roothub power-on-good delay
Revert "usb: core: hcd: Add support for deferring roothub registration"
Revert "xhci: Set HCD flag to defer primary roothub registration"
MIGRATE_PFN_LOCKED is used to indicate to migrate_vma_prepare() that a
source page was already locked during migrate_vma_collect(). If it
wasn't then the a second attempt is made to lock the page. However if
the first attempt failed it's unlikely a second attempt will succeed,
and the retry adds complexity. So clean this up by removing the retry
and MIGRATE_PFN_LOCKED flag.
Destination pages are also meant to have the MIGRATE_PFN_LOCKED flag
set, but nothing actually checks that.
Link: https://lkml.kernel.org/r/20211025041608.289017-1-apopple@nvidia.com
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Ralph Campbell <rcampbell@nvidia.com>
Acked-by: Felix Kuehling <Felix.Kuehling@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ben Skeggs <bskeggs@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The type of "order" in struct page_owner is unsigned short.
However, it is unsigned int in the following 3 functions:
__reset_page_owner
__set_page_owner_handle
__set_page_owner_handle
The type of "order" in argument list is unsigned int, which is
inconsistent.
[akpm@linux-foundation.org: update include/linux/page_owner.h]
Link: https://lkml.kernel.org/r/20211020125945.47792-1-caoyixuan2019@email.szu.edu.cn
Signed-off-by: Yixuan Cao <caoyixuan2019@email.szu.edu.cn>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add support for AMD SEV and SEV-ES intra-host migration support. Intra
host migration provides a low-cost mechanism for userspace VMM upgrades.
In the common case for intra host migration, we can rely on the normal
ioctls for passing data from one VMM to the next. SEV, SEV-ES, and other
confidential compute environments make most of this information opaque, and
render KVM ioctls such as "KVM_GET_REGS" irrelevant. As a result, we need
the ability to pass this opaque metadata from one VMM to the next. The
easiest way to do this is to leave this data in the kernel, and transfer
ownership of the metadata from one KVM VM (or vCPU) to the next. In-kernel
hand off makes it possible to move any data that would be
unsafe/impossible for the kernel to hand directly to userspace, and
cannot be reproduced using data that can be handed to userspace.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Generalize KVM_REQ_VM_BUGGED so that it can be called even in cases
where it is by design that the VM cannot be operated upon. In this
case any KVM_BUG_ON should still warn, so introduce a new flag
kvm->vm_dead that is separate from kvm->vm_bugged.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add guest api and guest kernel support for SEV live migration.
Introduces a new hypercall to notify the host of changes to the page
encryption status. If the page is encrypted then it must be migrated
through the SEV firmware or a helper VM sharing the key. If page is
not encrypted then it can be migrated normally by userspace. This new
hypercall is invoked using paravirt_ops.
Conflicts: sev_active() replaced by cc_platform_has(CC_ATTR_GUEST_MEM_ENCRYPT).
Introduce a new AMD Memory Encryption GUID which is currently
used for defining a new UEFI environment variable which indicates
UEFI/OVMF support for the SEV live migration feature. This variable
is setup when UEFI/OVMF detects host/hypervisor support for SEV
live migration and later this variable is read by the kernel using
EFI runtime services to verify if OVMF supports the live migration
feature.
Signed-off-by: Ashish Kalra <ashish.kalra@amd.com>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Message-Id: <1cea22976d2208f34d47e0c1ce0ecac816c13111.1629726117.git.ashish.kalra@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Commit c597bfddc9 ("sched: Provide Kconfig support for default dynamic
preempt mode") changed the selectable config names for the preemption
model. This means a config file must now select
CONFIG_PREEMPT_BEHAVIOUR=y
rather than
CONFIG_PREEMPT=y
to get a preemptible kernel. This means all arch config files would need to
be updated - right now they'll all end up with the default
CONFIG_PREEMPT_NONE_BEHAVIOUR.
Rather than touch a good hundred of config files, restore usage of
CONFIG_PREEMPT{_NONE, _VOLUNTARY}. Make them configure:
o The build-time preemption model when !PREEMPT_DYNAMIC
o The default boot-time preemption model when PREEMPT_DYNAMIC
Add siblings of those configs with the _BUILD suffix to unconditionally
designate the build-time preemption model (PREEMPT_DYNAMIC is built with
the "highest" preemption model it supports, aka PREEMPT). Downstream
configs should by now all be depending / selected by CONFIG_PREEMPTION
rather than CONFIG_PREEMPT, so only a few sites need patching up.
Signed-off-by: Valentin Schneider <valentin.schneider@arm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20211110202448.4054153-2-valentin.schneider@arm.com
It appears that some devices are lying about their mask capability,
pretending that they don't have it, while they actually do.
The net result is that now that we don't enable MSIs on such
endpoint.
Add a new per-device flag to deal with this. Further patches will
make use of it, sadly.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211104180130.3825416-2-maz@kernel.org
Cc: Bjorn Helgaas <helgaas@kernel.org>
The recent rework of PCI/MSI[X] masking moved the non-mask checks from the
low level accessors into the higher level mask/unmask functions.
This missed the fact that these accessors can be invoked from other places
as well. The missing checks break XEN-PV which sets pci_msi_ignore_mask and
also violates the virtual MSIX and the msi_attrib.maskbit protections.
Instead of sprinkling checks all over the place, lift them back into the
low level accessor functions. To avoid checking three different conditions
combine them into one property of msi_desc::msi_attrib.
[ josef: Fixed the missed conversion in the core code ]
Fixes: fcacdfbef5 ("PCI/MSI: Provide a new set of mask and unmask functions")
Reported-by: Josef Johansson <josef@oderland.se>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Josef Johansson <josef@oderland.se>
Cc: Bjorn Helgaas <helgaas@kernel.org>
Cc: stable@vger.kernel.org
Some ATA drives are very slow to respond to READ_LOG_EXT and
READ_LOG_DMA_EXT commands issued from ata_dev_configure() when the
device is revalidated right after resuming a system or inserting the
ATA adapter driver (e.g. ahci). The default 5s timeout
(ATA_EH_CMD_DFL_TIMEOUT) used for these commands is too short, causing
errors during the device configuration. Ex:
...
ata9: SATA max UDMA/133 abar m524288@0x9d200000 port 0x9d200400 irq 209
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: ATA-9: XXX XXXXXXXXXXXXXXX, XXXXXXXX, max UDMA/133
ata9.00: qc timeout (cmd 0x2f)
ata9.00: Read log page 0x00 failed, Emask 0x4
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: NCQ Send/Recv Log not supported
ata9.00: Read log page 0x08 failed, Emask 0x40
ata9.00: 27344764928 sectors, multi 16: LBA48 NCQ (depth 32), AA
ata9.00: Read log page 0x00 failed, Emask 0x40
ata9.00: ATA Identify Device Log not supported
ata9.00: failed to set xfermode (err_mask=0x40)
ata9: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata9.00: configured for UDMA/133
...
The timeout error causes a soft reset of the drive link, followed in
most cases by a successful revalidation as that give enough time to the
drive to become fully ready to quickly process the read log commands.
However, in some cases, this also fails resulting in the device being
dropped.
Fix this by using adding the ata_eh_revalidate_timeouts entries for the
READ_LOG_EXT and READ_LOG_DMA_EXT commands. This defines a timeout
increased to 15s, retriable one time.
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
support for a filehandle format deprecated 20 years ago, and further
xdr-related cleanup from Chuck.
-----BEGIN PGP SIGNATURE-----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=yKBl
-----END PGP SIGNATURE-----
Merge tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux
Pull nfsd updates from Bruce Fields:
"A slow cycle for nfsd: mainly cleanup, including Neil's patch dropping
support for a filehandle format deprecated 20 years ago, and further
xdr-related cleanup from Chuck"
* tag 'nfsd-5.16' of git://linux-nfs.org/~bfields/linux: (26 commits)
nfsd4: remove obselete comment
nfsd: document server-to-server-copy parameters
NFSD:fix boolreturn.cocci warning
nfsd: update create verifier comment
SUNRPC: Change return value type of .pc_encode
SUNRPC: Replace the "__be32 *p" parameter to .pc_encode
NFSD: Save location of NFSv4 COMPOUND status
SUNRPC: Change return value type of .pc_decode
SUNRPC: Replace the "__be32 *p" parameter to .pc_decode
SUNRPC: De-duplicate .pc_release() call sites
SUNRPC: Simplify the SVC dispatch code path
SUNRPC: Capture value of xdr_buf::page_base
SUNRPC: Add trace event when alloc_pages_bulk() makes no progress
svcrdma: Split svcrmda_wc_{read,write} tracepoints
svcrdma: Split the svcrdma_wc_send() tracepoint
svcrdma: Split the svcrdma_wc_receive() tracepoint
NFSD: Have legacy NFSD WRITE decoders use xdr_stream_subsegment()
SUNRPC: xdr_stream_subsegment() must handle non-zero page_bases
NFSD: Initialize pointer ni with NULL and not plain integer 0
NFSD: simplify struct nfsfh
...
Highlights include:
Features:
- NFSv4.1 can always retrieve and cache the ACCESS mode on OPEN
- Optimisations for READDIR and the 'ls -l' style workload
- Further replacements of dprintk() with tracepoints and other tracing
improvements
- Ensure we re-probe NFSv4 server capabilities when the user does a
"mount -o remount"
Bugfixes:
- Fix an Oops in pnfs_mark_request_commit()
- Fix up deadlocks in the commit code
- Fix regressions in NFSv2/v3 attribute revalidation due to the
change_attr_type optimisations
- Fix some dentry verifier races
- Fix some missing dentry verifier settings
- Fix a performance regression in nfs_set_open_stateid_locked()
- SUNRPC was sending multiple SYN calls when re-establishing a TCP
connection.
- Fix multiple NFSv4 issues due to missing sanity checking of server
return values
- Fix a potential Oops when FREE_STATEID races with an unmount
Cleanups:
- Clean up the labelled NFS code
- Remove unused header <linux/pnfs_osd_xdr.h>
-----BEGIN PGP SIGNATURE-----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=n8lj
-----END PGP SIGNATURE-----
Merge tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs
Pull NFS client updates from Trond Myklebust:
"Highlights include:
Features:
- NFSv4.1 can always retrieve and cache the ACCESS mode on OPEN
- Optimisations for READDIR and the 'ls -l' style workload
- Further replacements of dprintk() with tracepoints and other
tracing improvements
- Ensure we re-probe NFSv4 server capabilities when the user does a
"mount -o remount"
Bugfixes:
- Fix an Oops in pnfs_mark_request_commit()
- Fix up deadlocks in the commit code
- Fix regressions in NFSv2/v3 attribute revalidation due to the
change_attr_type optimisations
- Fix some dentry verifier races
- Fix some missing dentry verifier settings
- Fix a performance regression in nfs_set_open_stateid_locked()
- SUNRPC was sending multiple SYN calls when re-establishing a TCP
connection.
- Fix multiple NFSv4 issues due to missing sanity checking of server
return values
- Fix a potential Oops when FREE_STATEID races with an unmount
Cleanups:
- Clean up the labelled NFS code
- Remove unused header <linux/pnfs_osd_xdr.h>"
* tag 'nfs-for-5.16-1' of git://git.linux-nfs.org/projects/trondmy/linux-nfs: (84 commits)
NFSv4: Sanity check the parameters in nfs41_update_target_slotid()
NFS: Remove the nfs4_label argument from decode_getattr_*() functions
NFS: Remove the nfs4_label argument from nfs_setsecurity
NFS: Remove the nfs4_label argument from nfs_fhget()
NFS: Remove the nfs4_label argument from nfs_add_or_obtain()
NFS: Remove the nfs4_label argument from nfs_instantiate()
NFS: Remove the nfs4_label from the nfs_setattrres
NFS: Remove the nfs4_label from the nfs4_getattr_res
NFS: Remove the f_label from the nfs4_opendata and nfs_openres
NFS: Remove the nfs4_label from the nfs4_lookupp_res struct
NFS: Remove the label from the nfs4_lookup_res struct
NFS: Remove the nfs4_label from the nfs4_link_res struct
NFS: Remove the nfs4_label from the nfs4_create_res struct
NFS: Remove the nfs4_label from the nfs_entry struct
NFS: Create a new nfs_alloc_fattr_with_label() function
NFS: Always initialise fattr->label in nfs_fattr_alloc()
NFSv4.2: alloc_file_pseudo() takes an open flag, not an f_mode
NFS: Don't allocate nfs_fattr on the stack in __nfs42_ssc_open()
NFSv4: Remove unnecessary 'minor version' check
NFSv4: Fix potential Oops in decode_op_map()
...
Pull exit cleanups from Eric Biederman:
"While looking at some issues related to the exit path in the kernel I
found several instances where the code is not using the existing
abstractions properly.
This set of changes introduces force_fatal_sig a way of sending a
signal and not allowing it to be caught, and corrects the misuse of
the existing abstractions that I found.
A lot of the misuse of the existing abstractions are silly things such
as doing something after calling a no return function, rolling BUG by
hand, doing more work than necessary to terminate a kernel thread, or
calling do_exit(SIGKILL) instead of calling force_sig(SIGKILL).
In the review a deficiency in force_fatal_sig and force_sig_seccomp
where ptrace or sigaction could prevent the delivery of the signal was
found. I have added a change that adds SA_IMMUTABLE to change that
makes it impossible to interrupt the delivery of those signals, and
allows backporting to fix force_sig_seccomp
And Arnd found an issue where a function passed to kthread_run had the
wrong prototype, and after my cleanup was failing to build."
* 'exit-cleanups-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace: (23 commits)
soc: ti: fix wkup_m3_rproc_boot_thread return type
signal: Add SA_IMMUTABLE to ensure forced siganls do not get changed
signal: Replace force_sigsegv(SIGSEGV) with force_fatal_sig(SIGSEGV)
exit/r8188eu: Replace the macro thread_exit with a simple return 0
exit/rtl8712: Replace the macro thread_exit with a simple return 0
exit/rtl8723bs: Replace the macro thread_exit with a simple return 0
signal/x86: In emulate_vsyscall force a signal instead of calling do_exit
signal/sparc32: In setup_rt_frame and setup_fram use force_fatal_sig
signal/sparc32: Exit with a fatal signal when try_to_clear_window_buffer fails
exit/syscall_user_dispatch: Send ordinary signals on failure
signal: Implement force_fatal_sig
exit/kthread: Have kernel threads return instead of calling do_exit
signal/s390: Use force_sigsegv in default_trap_handler
signal/vm86_32: Properly send SIGSEGV when the vm86 state cannot be saved.
signal/vm86_32: Replace open coded BUG_ON with an actual BUG_ON
signal/sparc: In setup_tsb_params convert open coded BUG into BUG
signal/powerpc: On swapcontext failure force SIGSEGV
signal/sh: Use force_sig(SIGKILL) instead of do_group_exit(SIGKILL)
signal/mips: Update (_save|_restore)_fp_context to fail with -EFAULT
signal/sparc32: Remove unreachable do_exit in do_sparc_fault
...
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQRAhzRXHqcMeLMyaSiRxhvAZXjcogUCYYvE0wAKCRCRxhvAZXjc
oo36AQCQRC9+LsfBsfoqrrdfWqp9ifs9DuytUg+CTftsy1Pn0QD/ZtySkNx9mnNl
0/lSTN5dJBfEYm6Xcfxuu/vu/iauhw0=
=dY6T
-----END PGP SIGNATURE-----
Merge tag 'pidfd.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux
Pull pidfd updates from Christian Brauner:
"Various places in the kernel have picked up pidfds.
The two most recent additions have probably been the ability to use
pidfds in bpf maps and the usage of pidfds in mm-based syscalls such
as process_mrelease() and process_madvise().
The same pattern to turn a pidfd into a struct task exists in two
places. One of those places used PIDTYPE_TGID while the other one used
PIDTYPE_PID even though it is clearly documented in all pidfd-helpers
that pidfds __currently__ only refer to thread-group leaders (subject
to change in the future if need be).
This isn't a bug per se but has the potential to be one if we allow
pidfds to refer to individual threads. If that happens we want to
audit all codepaths that make use of them to ensure they can deal with
pidfds refering to individual threads.
This adds a simple helper to turn a pidfd into a struct task making it
easy to grep for such places. Plus, it gets rid of code-duplication"
* tag 'pidfd.v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux:
mm: use pidfd_get_task()
pid: add pidfd_get_task() helper
- Fix 2 intel_pstate driver regressions related to the HWP interrupt
handling added recently (Srinivas Pandruvada).
- Fix intel_pstate driver regression introduced during the 5.11
cycle and causing HWP desired performance to be mishandled in
some cases when switching driver modes and during system
suspend and shutdown (Rafael Wysocki).
- Fix system-wide device suspend and resume locking to avoid
deadlocks when device objects are deleted during a system-wide
PM transition (Rafael Wysocki).
- Modify system-wide suspend of devices to prevent cpuidle drivers
based on runtime PM from misbehaving during the "no IRQ" phase of
it (Ulf Hansson).
- Fix return value of _opp_add_static_v2() helper (YueHaibing).
- Fix required-opp handle count (Pavankumar Kondeti).
- Add resource managed OPP helpers, update dev_pm_opp_attach_genpd(),
update their devfreq users, and make minor DT binding change (Dmitry
Osipenko).
-----BEGIN PGP SIGNATURE-----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=lduU
-----END PGP SIGNATURE-----
Merge tag 'pm-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These fix three intel_pstate driver regressions, fix locking in the
core code suspending and resuming devices during system PM
transitions, fix the handling of cpuidle drivers based on runtime PM
during system-wide suspend, fix two issues in the operating
performance points (OPP) framework and resource-managed helpers to it.
Specifics:
- Fix two intel_pstate driver regressions related to the HWP
interrupt handling added recently (Srinivas Pandruvada).
- Fix intel_pstate driver regression introduced during the 5.11 cycle
and causing HWP desired performance to be mishandled in some cases
when switching driver modes and during system suspend and shutdown
(Rafael Wysocki).
- Fix system-wide device suspend and resume locking to avoid
deadlocks when device objects are deleted during a system-wide PM
transition (Rafael Wysocki).
- Modify system-wide suspend of devices to prevent cpuidle drivers
based on runtime PM from misbehaving during the "no IRQ" phase of
it (Ulf Hansson).
- Fix return value of _opp_add_static_v2() helper (YueHaibing).
- Fix required-opp handle count (Pavankumar Kondeti).
- Add resource managed OPP helpers, update dev_pm_opp_attach_genpd(),
update their devfreq users, and make minor DT binding change
(Dmitry Osipenko)"
* tag 'pm-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM: sleep: Avoid calling put_device() under dpm_list_mtx
cpufreq: intel_pstate: Clear HWP Status during HWP Interrupt enable
cpufreq: intel_pstate: Fix unchecked MSR 0x773 access
cpufreq: intel_pstate: Clear HWP desired on suspend/shutdown and offline
PM: sleep: Fix runtime PM based cpuidle support
dt-bindings: opp: Allow multi-worded OPP entry name
opp: Fix return in _opp_add_static_v2()
PM / devfreq: tegra30: Check whether clk_round_rate() returns zero rate
PM / devfreq: tegra30: Use resource-managed helpers
PM / devfreq: Add devm_devfreq_add_governor()
opp: Add more resource-managed variants of dev_pm_opp_of_add_table()
opp: Change type of dev_pm_opp_attach_genpd(names) argument
opp: Fix required-opps phandle array count check
- Add support for new ACPI device configuration object called _DSC
to allow certain devices to be probed without changing their power
states, document it and make two drivers use it (Sakari Ailus,
Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong).
-----BEGIN PGP SIGNATURE-----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=k8+T
-----END PGP SIGNATURE-----
Merge tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These add support for a new ACPI device configuration object called
_DSC, fix some issues including one recent regression, add two new
items to quirk lists and clean up assorted pieces of code.
Specifics:
- Add support for new ACPI device configuration object called _DSC
("Deepest State for Configuration") to allow certain devices to be
probed without changing their power states, document it and make
two drivers use it (Sakari Ailus, Rajmohan Mani).
- Fix device wakeup power reference counting broken recently by
mistake (Rafael Wysocki).
- Drop unused symbol and macros depending on it from acgcc.h (Rafael
Wysocki).
- Add HP ZHAN 66 Pro to the "no EC wakeup" quirk list (Binbin Zhou).
- Add Xiaomi Mi Pad 2 to the backlight quirk list and drop an unused
piece of data from all of the list entries (Hans de Goede).
- Fix register read accesses handling in the Intel PMIC operation
region driver (Hans de Goede).
- Clean up static variables initialization in the EC driver
(wangzhitong)"
* tag 'acpi-5.16-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
Documentation: ACPI: Fix non-D0 probe _DSC object example
ACPI: Drop ACPI_USE_BUILTIN_STDARG ifdef from acgcc.h
ACPI: PM: Fix device wakeup power reference counting error
ACPI: video: use platform backlight driver on Xiaomi Mi Pad 2
ACPI: video: Drop dmi_system_id.ident settings from video_detect_dmi_table[]
ACPI: PMIC: Fix intel_pmic_regs_handler() read accesses
ACPI: EC: Remove initialization of static variables to false
ACPI: EC: Use ec_no_wakeup on HP ZHAN 66 Pro
at24: Support probing while in non-zero ACPI D state
media: i2c: imx319: Support device probe in non-zero ACPI D state
ACPI: Add a convenience function to tell a device is in D0 state
Documentation: ACPI: Document _DSC object usage for enum power state
i2c: Allow an ACPI driver to manage the device's power state during probe
ACPI: scan: Obtain device's desired enumeration power state
Updates:
- Another pile of idxd updates
- pm routines cleanup for at_xdmac driver
- Correct handling of callback_result for few drivers
- zynqmp_dma driver updates and descriptor management refinement
- Hardware handshaking support for dw-axi-dmac
- Support for remotely powered controllers in Qcom bam dma
- tegra driver updates
-----BEGIN PGP SIGNATURE-----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=eqOs
-----END PGP SIGNATURE-----
Merge tag 'dmaengine-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul:
"A bunch of driver updates, no new driver or controller support this
time though:
- Another pile of idxd updates
- pm routines cleanup for at_xdmac driver
- Correct handling of callback_result for few drivers
- zynqmp_dma driver updates and descriptor management refinement
- Hardware handshaking support for dw-axi-dmac
- Support for remotely powered controllers in Qcom bam dma
- tegra driver updates"
* tag 'dmaengine-5.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (69 commits)
dmaengine: ti: k3-udma: Set r/tchan or rflow to NULL if request fail
dmaengine: ti: k3-udma: Set bchan to NULL if a channel request fail
dmaengine: stm32-dma: avoid 64-bit division in stm32_dma_get_max_width
dmaengine: fsl-edma: support edma memcpy
dmaengine: idxd: fix resource leak on dmaengine driver disable
dmaengine: idxd: cleanup completion record allocation
dmaengine: zynqmp_dma: Correctly handle descriptor callbacks
dmaengine: xilinx_dma: Correctly handle cyclic descriptor callbacks
dmaengine: altera-msgdma: Correctly handle descriptor callbacks
dmaengine: at_xdmac: fix compilation warning
dmaengine: dw-axi-dmac: Simplify assignment in dma_chan_pause()
dmaengine: qcom: bam_dma: Add "powered remotely" mode
dt-bindings: dmaengine: bam_dma: Add "powered remotely" mode
dmaengine: sa11x0: Mark PM functions as __maybe_unused
dmaengine: switch from 'pci_' to 'dma_' API
dmaengine: ioat: switch from 'pci_' to 'dma_' API
dmaengine: hsu: switch from 'pci_' to 'dma_' API
dmaengine: hisi_dma: switch from 'pci_' to 'dma_' API
dmaengine: dw: switch from 'pci_' to 'dma_' API
dmaengine: dw-edma-pcie: switch from 'pci_' to 'dma_' API
...
cros_ec_typec:
* Clean up use of cros_ec_check_features
cros_ec_*:
* Rename and move cros_ec_pd_command to cros_ec_command, and make changes to
cros_ec_typec and cros_ec_proto to use the new common command, reducing
duplication.
sensorhub:
* simplify getting .driver_data in cros_ec_sensors_core and cros_ec_sensorhub
misc:
* Maintainership change. Enric Balletbo i Serra has moved on from Collabora,
so removing him from chrome/platform maintainers. Thanks for all of your
hard work maintaining this, Enric, and best of luck to you in your new role!
* Add Prashant Malani as driver maintainer for cros_ec_typec.c and
cros_usbpd_notify. He was already principal contributor of these drivers.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQQCtZK6p/AktxXfkOlzbaomhzOwwgUCYYrwxQAKCRBzbaomhzOw
wuTkAQCsc0psJQ+K6JVlBk16fX1kuucS1J7QiqtUaT4ZGCHrbQEApK2X+R9pXmmC
I6RfApB0Z2AMUg2uEB4OSNLaoiZ5pQM=
=SBds
-----END PGP SIGNATURE-----
Merge tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux
Pull chrome platform updates from Benson Leung:
"cros_ec_typec:
- Clean up use of cros_ec_check_features
cros_ec_*:
- Rename and move cros_ec_pd_command to cros_ec_command, and make
changes to cros_ec_typec and cros_ec_proto to use the new common
command, reducing duplication.
sensorhub:
- simplify getting .driver_data in cros_ec_sensors_core and
cros_ec_sensorhub
misc:
- Maintainership change. Enric Balletbo i Serra has moved on from
Collabora, so removing him from chrome/platform maintainers. Thanks
for all of your hard work maintaining this, Enric, and best of luck
to you in your new role!
- Add Prashant Malani as driver maintainer for cros_ec_typec.c and
cros_usbpd_notify. He was already principal contributor of these
drivers"
* tag 'tag-chrome-platform-for-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/chrome-platform/linux:
platform/chrome: cros_ec_proto: Use ec_command for check_features
platform/chrome: cros_ec_proto: Use EC struct for features
MAINTAINERS: Chrome: Drop Enric Balletbo i Serra
platform/chrome: cros_ec_typec: Use cros_ec_command()
platform/chrome: cros_ec_proto: Add version for ec_command
platform/chrome: cros_ec_proto: Make data pointers void
platform/chrome: cros_usbpd_notify: Move ec_command()
platform/chrome: cros_usbpd_notify: Rename cros_ec_pd_command()
platform/chrome: cros_ec: Fix spelling mistake "responsed" -> "response"
platform/chrome: cros_ec_sensorhub: simplify getting .driver_data
iio: common: cros_ec_sensors: simplify getting .driver_data
platform/chrome: cros-ec-typec: Cleanup use of check_features
platform/chrome: cros_ec_proto: Fix check_features ret val
MAINTAINERS: Add Prashant's maintainership of cros_ec drivers
- Fix double-evaluation of 'pte' macro argument when using 52-bit PAs
- Fix signedness of some MTE prctl PR_* constants
- Fix kmemleak memory usage by skipping early pgtable allocations
- Fix printing of CPU feature register strings
- Remove redundant -nostdlib linker flag for vDSO binaries
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmGL8ukQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNB0XCADIFxVeLM3YMPsnDC6ttmGp/w1TXh5RoNBm
IY5utdu8ybdrdCYO//Z6i7rQiYwPBRbR8Xts1LAfZDVuD/IPKqxiY+wjMe9FYu0U
lb14dnT5iI7L3l0yo/5s1EC8FC/pfCMwi50+trAS5H5jo2wg/+6B/bgbymzTd1ZB
vzVVzyGv1L/3xKHT4uEDjY1jMPRBH4Ugx2bJ1tzRzsC3Gz0D7ZeVd1Dg3ftPMsqI
MA4Q5QeE9MsafcV8sKDRLnzNSYEr50goA0xtCre81VmJDNcm/y6UybUCF75KU72M
kAOImXs0+wrDqNIocYgYlSWRu9xjw8qjoxjnyqikFx47HBesjY8T
=pHQk
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
- Fix double-evaluation of 'pte' macro argument when using 52-bit PAs
- Fix signedness of some MTE prctl PR_* constants
- Fix kmemleak memory usage by skipping early pgtable allocations
- Fix printing of CPU feature register strings
- Remove redundant -nostdlib linker flag for vDSO binaries
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: pgtable: make __pte_to_phys/__phys_to_pte_val inline functions
arm64: Track no early_pgtable_alloc() for kmemleak
arm64: mte: change PR_MTE_TCF_NONE back into an unsigned long
arm64: vdso: remove -nostdlib compiler flag
arm64: arm64_ftr_reg->name may not be a human-readable string
- Continue the cleanup of the dax api in preparation for a dax-device
block-device divorce.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQSbo+XnGs+rwLz9XGXfioYZHlFsZwUCYYWizAAKCRDfioYZHlFs
Z8XCAP9xqYKjrCUiNvhRlHsKZgc0mD4lT4EbUvfFMec9Ay9pKAD8CkIKiQ/ZBhrS
UiAmMVgKzAtxwZ00eiVWkEKdvMtw0w0=
=gnGh
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm update from Dan Williams:
"A single cleanup that precedes some deeper PMEM/DAX reworks that did
not settle in time for v5.16:
- Continue the cleanup of the dax api in preparation for a dax-device
block-device divorce"
* tag 'libnvdimm-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm/pmem: move dax_attribute_group from dax to pmem
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.14 (GNU/Linux)
iEYEABECAAYFAmGKax0ACgkQ+iyteGJfRsomvgCgpAmE/d5d9mSpq0zGaLa9ocxt
bfQAniIp5n+wklRuiqYRAyCBdNqbKhAI
=DlM4
-----END PGP SIGNATURE-----
Merge tag 'linux-watchdog-5.16-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck:
- f71808e_wdt: convert to watchdog framework
- db8500_wdt: Rename driver (was ux500_wdt.c)
- sunxi: Add compatibles for R329 and D1
- mtk: add disable_wdt_extrst support
- several other small fixes and improvements
* tag 'linux-watchdog-5.16-rc1' of git://www.linux-watchdog.org/linux-watchdog: (30 commits)
watchdog: db8500_wdt: Rename symbols
watchdog: db8500_wdt: Rename driver
watchdog: ux500_wdt: Drop platform data
watchdog: bcm63xx_wdt: fix fallthrough warning
watchdog: iTCO_wdt: No need to stop the timer in probe
watchdog: s3c2410: describe driver in KConfig
watchdog: sp5100_tco: Add support for get_timeleft
watchdog: mtk: add disable_wdt_extrst support
dt-bindings: watchdog: mtk-wdt: add disable_wdt_extrst support
watchdog: rza_wdt: Use semicolons instead of commas
watchdog: mlx-wdt: Use regmap_write_bits()
watchdog: rti-wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: iTCO_wdt: Make use of the helper function devm_platform_ioremap_resource()
watchdog: ar7_wdt: Make use of the helper function devm_platform_ioremap_resource_byname()
watchdog: sunxi_wdt: Add support for D1
dt-bindings: watchdog: sunxi: Add compatibles for D1
ar7: fix kernel builds for compiler test
dt-bindings: watchdog: sunxi: Add compatibles for R329
watchdog: meson_gxbb_wdt: add timeout parameter
watchdog: meson_gxbb_wdt: add nowayout parameter
...
The remoteproc repo is moved to a new path on git.kernel.org, to allow
Mathieu push access to the branches.
Support for the Mediatek MT8195 SCP was added, the related DeviceTree
binding was converted to YAML and MT8192 SCP was documented as well.
Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in
resuming the system after suspend, a new remoteproc driver for booting
this core is introduced.
A new driver to support the DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP is added.
The Qualcomm modem and TrustZone based remoteproc drivers gains support
for the modem in SC7280 and MSM8996 gains support for a missing
power-domain.
Throughout the Qualcomm drivers, the support for informing the always-on
power coprocessor about the state of each remoteproc is reworked to
avoid complications related to our use of genpd and the system suspend
state.
Lastly a number of small fixes are found throughout the drivers and
framework.
-----BEGIN PGP SIGNATURE-----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=i0ql
-----END PGP SIGNATURE-----
Merge tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson:
"The remoteproc repo is moved to a new path on git.kernel.org, to allow
Mathieu push access to the branches.
Support for the Mediatek MT8195 SCP was added, the related DeviceTree
binding was converted to YAML and MT8192 SCP was documented as well.
Amlogic Meson6, Meson8, Meson8b and Meson8m2 has an ARC core to aid in
resuming the system after suspend, a new remoteproc driver for booting
this core is introduced.
A new driver to support the DSP processor found on NXP i.MX8QM,
i.MX8QXP, i.MX8MP and i.MX8ULP is added.
The Qualcomm modem and TrustZone based remoteproc drivers gains
support for the modem in SC7280 and MSM8996 gains support for a
missing power-domain.
Throughout the Qualcomm drivers, the support for informing the
always-on power coprocessor about the state of each remoteproc is
reworked to avoid complications related to our use of genpd and the
system suspend state.
Lastly a number of small fixes are found throughout the drivers and
framework"
* tag 'rproc-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (39 commits)
remoteproc: Remove vdev_to_rvdev and vdev_to_rproc from remoteproc API
remoteproc: omap_remoteproc: simplify getting .driver_data
remoteproc: qcom_q6v5_mss: Use devm_platform_ioremap_resource_byname() to simplify code
remoteproc: Fix a memory leak in an error handling path in 'rproc_handle_vdev()'
remoteproc: Fix spelling mistake "atleast" -> "at least"
remoteproc: imx_dsp_rproc: mark PM functions as __maybe_unused
remoteproc: imx_dsp_rproc: Correct the comment style of copyright
dt-bindings: dsp: fsl: Update binding document for remote proc driver
remoteproc: imx_dsp_rproc: Add remoteproc driver for DSP on i.MX
remoteproc: imx_rproc: Add IMX_RPROC_SCU_API method
remoteproc: imx_rproc: Move common structure to header file
rpmsg: char: Remove useless include
remoteproc: meson-mx-ao-arc: fix a bit test
remoteproc: mss: q6v5-mss: Add modem support on SC7280
dt-bindings: remoteproc: qcom: Update Q6V5 Modem PIL binding
remoteproc: qcom: pas: Add SC7280 Modem support
dt-bindings: remoteproc: qcom: pas: Add SC7280 MPSS support
remoteproc: qcom: pas: Use the same init resources for MSM8996 and MSM8998
MAINTAINERS: Update remoteproc repo url
dt-bindings: remoteproc: k3-dsp: Cleanup SoC compatible from DT example
...
Alan Stern