The current transaction is being dereferenced before asserting that is
not NULL; that isn't going to help.
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
Document when to use gfs2_blk2rgrpd for "inexact" resource group
matching. Based on that, fix an incorrect use of gfs2_blk2rgrpd in
sweep_bh_for_rgrps.
Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Bob Peterson <rpeterso@redhat.com>
In x86 architecture dependend part function get_cpuid_str() mallocs a
128 byte buffer, but does not check if the memory allocation succeeded
or not.
When the memory allocation fails, function __get_cpuid() is called with
first parameter being a NULL pointer. However this function references
its first parameter and operates on a NULL pointer which might cause
core dumps.
Signed-off-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Link: http://lkml.kernel.org/r/20180117131611.34319-1-tmricht@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
script --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf script --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-9-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously it was only allowed to use at most 10 time slices in 'perf
report --time'.
This patch removes this limitation.
For example, following command line is OK (12 time slices)
perf report --stdio --time 1%/1,1%/2,1%/3,1%/4,1%/5,1%/6,1%/7,1%/8,1%/9,1%/10,1%/11,1%/12
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-8-git-send-email-yao.jin@linux.intel.com
[ No need to check for NULL to call free, use zfree ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously we use a magic number 10 to limit the number of time slices.
It's not very good.
This patch creates a new function perf_time__range_alloc() to allocate
time slices buffer. The number of buffer entries is determined by the
number of comma in string but at least it will allocate one entry even
if no comma is found.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-7-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add a time slices indication to the perf report header.
For example,
# perf report --stdio --time 10%
# Total Lost Samples: 0
#
# Samples: 9K of event 'cycles:ppp' (time slices: 10%)
# Event count (approx.): 8951288803
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested--by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-6-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Previously, the time percent slice needs an index to specify which one
the user wants.
It may be easier to use if the index can be omitted. So with this
patch, for example,
perf report --stdio --time 10%/1 should be equivalent to
perf report --stdio --time 10%
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-5-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The command line like 'perf report --stdio --time 1abc%/1' could be
accepted by perf. It looks not very good.
This patch uses strtod() to replace original atof() and check the entire
string. Now for the same command line, it would return error message
"Invalid time string".
root@skl:/tmp# perf report --stdio --time 1abc%/1
Invalid time string
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-4-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following message will be returned to user when executing 'perf
script --time' if perf data file doesn't contain the first/last sample
time.
"HINT: no first/last sample time found in perf data.
Please use latest perf binary to execute 'perf record'
(if '--buildid-all' is enabled, needs to set '--timestamp-boundary')."
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The following message will be returned to user when executing
'perf report --time' if perf data file doesn't contain the
first/last sample time.
"HINT: no first/last sample time found in perf data.
Please use latest perf binary to execute 'perf record'
(if '--buildid-all' is enabled, needs to set '--timestamp-boundary')."
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Reviewed-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1515596433-24653-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When exposing data access through debugfs, the correct
debugfs_create_*() functions must be used, depending on data type.
Remove all casts from data pointers passed to debugfs_create_*()
functions, as such casts prevent the compiler from flagging bugs.
omap_iommu.nr_tlb_entries is "int", hence casting to "u8 *" exposes only
a part of it. Fix this by using debugfs_create_u32() instead.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
When we use a global DWARF setting as in:
perf record --call-graph dwarf
According to 5c0cf22477 ("perf record: Store data mmaps for dwarf unwind") we need
to set up some extra perf_event_attr bits.
But when we instead do a per event dwarf setting:
perf record -e cycles/call-graph=dwarf/
This was not being done, make them equivalent.
This didn't produce any output changes in my tests while fixing up loose
ends in the per-event settings, I found it just by comparing the
perf_event_attr fields trying to find an explanation for those problems.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Noel Grandin <noelgrandin@gmail.com>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-6476r53h2o38skbs9qa4ust4@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If we use:
perf trace --max-stack=4
then the syscall events will use DWARF callchains, when available
(libunwind enabled in the build) and the printing will stop at 4 levels.
When we introduced support for tracepoint events this ended up not
applying for them, fix it.
Before:
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.058 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.058/0.058/0.058/0.000 ms
0.000 probe_libc:inet_pton:(7fc6c2a16350))
#
After:
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.087 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.087/0.087/0.087/0.000 ms
0.000 probe_libc:inet_pton:(7fbf9a041350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa947cb67f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa947cb68379] (/usr/bin/ping)
#
Reported-by: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-afsu9eegd43ppihiuafhh9qv@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting up DWARF callchains on specific events, without using
'record' or 'trace' --call-graph, but instead doing it like:
perf trace -e cycles/call-graph=dwarf/
The unwind__prepare_access() call in thread__insert_map() when we
process PERF_RECORD_MMAP(2) metadata events were not being performed,
precluding us from using per-event DWARF callchains, handling them just
when we asked for all events to be DWARF, using "--call-graph dwarf".
We do it in the PERF_RECORD_MMAP because we have to look at one of the
executable maps to figure out the executable type (64-bit, 32-bit) of
the DSO laid out in that mmap. Also to look at the architecture where
the perf.data file was recorded.
All this probably should be deferred to when we process a sample for
some thread that has callchains, so that we do this processing only for
the threads with samples, not for all of them.
For now, fix using DWARF on specific events.
Before:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.048 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.048/0.048/0.048/0.000 ms
0.000 probe_libc:inet_pton:(7fe9597bb350))
Problem processing probe_libc:inet_pton callchain, skipping...
#
After:
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.060 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.060/0.060/0.060/0.000 ms
0.000 probe_libc:inet_pton:(7fd4aa930350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa804e51af3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa804e51b379] (/usr/bin/ping)
#
# perf trace --call-graph=dwarf --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.057 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.057/0.057/0.057/0.000 ms
0.000 probe_libc:inet_pton:(7f9363b9e350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffa9e8a14e0f3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffa9e8a14e1379] (/usr/bin/ping)
#
# perf trace --call-graph=fp --no-syscalls -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.077 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.077/0.077/0.077/0.000 ms
0.000 probe_libc:inet_pton:(7f4947e1c350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa716d88ef3f] (/usr/bin/ping)
__libc_start_main (/usr/lib64/libc-2.26.so)
[0xffffaa716d88f379] (/usr/bin/ping)
#
# perf trace --no-syscalls -e probe_libc:inet_pton/call-graph=fp/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.078 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.078/0.078/0.078/0.000 ms
0.000 probe_libc:inet_pton:(7fa157696350))
__GI___inet_pton (/usr/lib64/libc-2.26.so)
getaddrinfo (/usr/lib64/libc-2.26.so)
[0xffffa9ba39c74f40] (/usr/bin/ping)
#
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/r/20180116182650.GE16107@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When setting the "dwarf" unwinder for a specific event and not
specifying the max-stack, the attr.sample_max_stack ended up using an
uninitialized callchain_param.max_stack, fix it by using designated
initializers for that callchain_param variable, zeroing all non
explicitely initialized struct members.
Here is what happened:
# perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
callchain: type DWARF
callchain: stack dump size 8192
perf_event_attr:
type 2
size 112
config 0x730
{ sample_period, sample_freq } 1
sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
exclude_callchain_user 1
{ wakeup_events, wakeup_watermark } 1
sample_regs_user 0xff0fff
sample_stack_user 8192
sample_max_stack 50656
sys_perf_event_open failed, error -75
Value too large for defined data type
# perf trace -vv --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
callchain: type DWARF
callchain: stack dump size 8192
perf_event_attr:
type 2
size 112
config 0x730
sample_type IP|TID|TIME|ADDR|CALLCHAIN|CPU|PERIOD|RAW|REGS_USER|STACK_USER|DATA_SRC
exclude_callchain_user 1
sample_regs_user 0xff0fff
sample_stack_user 8192
sample_max_stack 30448
sys_perf_event_open failed, error -75
Value too large for defined data type
#
Now the attr.sample_max_stack is set to zero and the above works as
expected:
# perf trace --no-syscalls --max-stack 4 -e probe_libc:inet_pton/call-graph=dwarf/ ping -6 -c 1 ::1
PING ::1(::1) 56 data bytes
64 bytes from ::1: icmp_seq=1 ttl=64 time=0.072 ms
--- ::1 ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 0ms
rtt min/avg/max/mdev = 0.072/0.072/0.072/0.000 ms
0.000 probe_libc:inet_pton:(7feb7a998350))
__inet_pton (inlined)
gaih_inet.constprop.7 (/usr/lib64/libc-2.26.so)
__GI_getaddrinfo (inlined)
[0xffffaa39b6108f3f] (/usr/bin/ping)
#
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Hendrick Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Link: https://lkml.kernel.org/n/tip-is9tramondqa9jlxxsgcm9iz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
'perf record' and 'perf report --dump-raw-trace' supported in this
release.
Example usage:
# perf record -e arm_spe/ts_enable=1,pa_enable=1/ dd if=/dev/zero of=/dev/null count=10000
# perf report --dump-raw-trace
Note that the perf.data file is portable, so the report can be run on
another architecture host if necessary.
Output will contain raw SPE data and its textual representation, such
as:
0x5c8 [0x30]: PERF_RECORD_AUXTRACE size: 0x200000 offset: 0 ref: 0x1891ad0e idx: 1 tid: 2227 cpu: 1
.
. ... ARM SPE data: size 2097152 bytes
. 00000000: 49 00 LD
. 00000002: b2 c0 3b 29 0f 00 00 ff ff VA 0xffff00000f293bc0
. 0000000b: b3 c0 eb 24 fb 00 00 00 80 PA 0xfb24ebc0 ns=1
. 00000014: 9a 00 00 LAT 0 XLAT
. 00000017: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS
. 00000019: b0 00 c4 15 08 00 00 ff ff PC 0xff00000815c400 el3 ns=1
. 00000022: 98 00 00 LAT 0 TOT
. 00000025: 71 36 6c 21 2c 09 00 00 00 TS 39395093558
. 0000002e: 49 00 LD
. 00000030: b2 80 3c 29 0f 00 00 ff ff VA 0xffff00000f293c80
. 00000039: b3 80 ec 24 fb 00 00 00 80 PA 0xfb24ec80 ns=1
. 00000042: 9a 00 00 LAT 0 XLAT
. 00000045: 42 16 EV RETIRED L1D-ACCESS TLB-ACCESS
. 00000047: b0 f4 11 16 08 00 00 ff ff PC 0xff0000081611f4 el3 ns=1
. 00000050: 98 00 00 LAT 0 TOT
. 00000053: 71 36 6c 21 2c 09 00 00 00 TS 39395093558
. 0000005c: 48 00 INSN-OTHER
. 0000005e: 42 02 EV RETIRED
. 00000060: b0 2c ef 7f 08 00 00 ff ff PC 0xff0000087fef2c el3 ns=1
. 00000069: 98 00 00 LAT 0 TOT
. 0000006c: 71 d1 6f 21 2c 09 00 00 00 TS 39395094481
...
Other release notes:
- applies to acme's perf/{core,urgent} branches, likely elsewhere
- Report is self-contained within the tool.
Record requires enabling the kernel SPE driver by
setting CONFIG_ARM_SPE_PMU.
- The intel-bts implementation was used as a starting point; its
min/default/max buffer sizes and power of 2 pages granularity need to be
revisited for ARM SPE
- Recording across multiple SPE clusters/domains not supported
- Snapshot support (record -S), and conversion to native perf events
(e.g., via 'perf inject --itrace'), are also not supported
- Technically both cs-etm and spe can be used simultaneously, however
disabled for simplicity in this release
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Reviewed-by: Dongjiu Geng <gengdongjiu@huawei.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rob Herring <robh@kernel.org>
Cc: Suzuki Poulouse <suzuki.poulose@arm.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Wang Nan <wangnan0@huawei.com>
Cc: Will Deacon <will.deacon@arm.com>
Link: http://lkml.kernel.org/r/20180114132850.0b127434b704a26bad13268f@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
If a field is a dynamic string, get_field_str() returned just the
offset/size value and not the string. Have it parse the offset/size
correctly to return the actual string. Otherwise filtering fails when
trying to filter fields that are dynamic strings.
Reported-by: Gopanapalli Pradeep <prap_hai@yahoo.com>
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.146333275@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Currently the FILTER_TRIVIAL_FALSE case has a missing break statement,
if the trivial type is FALSE, it will also run into the TRUE case, and
always be skipped as the TRUE statement will continue the loop on the
inverse condition of the FALSE statement.
Reported-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004823.012918807@goodmis.org
Link: http://lkml.kernel.org/r/1493218540-12296-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It makes the code clearer and less error prone.
clearer:
- less code
- the code is now using the same format to create strings dynamically
less error prone:
- no magic number +2 +9 +5 to compute the size
- no copy&paste of the strings to compute the size and to concatenate
The function `asprintf` is not POSIX standard but the program
was already using it. Later it can be decided to use only POSIX
functions, then we can easly replace all the `asprintf(3)` with a local
implementation of that function.
Signed-off-by: Federico Vaga <federico.vaga@vaga.pv.it>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Federico Vaga <federico.vaga@vaga.pv.it>
Link: http://lkml.kernel.org/r/20170802221558.9684-2-federico.vaga@vaga.pv.it
Link: http://lkml.kernel.org/r/20180112004822.686281649@goodmis.org
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When a record has an unrecognized type, an error message is reported,
but it would also be helpful to see the contents of that record. At
least show what it is in hex, instead of just showing a blank line.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.542204577@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The Linux kernel printf() has some extended use cases that dereference
the pointer. This is dangerouse for tracing because the pointer that is
dereferenced can change or even be unmapped. It also causes issues when
the trace data is extracted, because user space does not have access to
the contents of the pointer even if it still exists.
To handle this, the kernel was updated to process these dereferenced
pointers at the time they are recorded, and not post processed. Now they
exist in the tracing buffer, and no dereference is needed at the time of
reading the trace.
The event parsing library needs to handle this new case.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.403349289@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When processing %pX in pretty_print(), simplify the logic slightly by
incrementing the ptr to the format string if isalnum(ptr[1]) is true.
This follows the logic a bit more closely to what is in the kernel.
Also, this fixes a small bug where %pF was not giving the offset of the
function.
Signed-off-by: Steven Rostedt <rostedt@goodmis.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/20180112004822.260262257@goodmis.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Add an extra temporary register parameter to uaccess_ttbr0_disable which
is about to be required for arm64 PAN support.
This patch doesn't introduce any functional change but ensures that the
kernel compiles once the KVM/ARM tree is merged with the arm64 tree by
ensuring a trivially mergable conflict with commit
6b88a32c7a
("arm64: kpti: Fix the interaction between ASID switching and software PAN").
Cc: Will Deacon <will.deacon@arm.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Marc Zyngier <marc.zyngier@arm.com>
Signed-off-by: Christoffer Dall <christoffer.dall@linaro.org>
The missing 'volatile' keyword on the iounmap argument leads to lots of
harmless warnings in an allmodconfig build:
sound/pci/echoaudio/echoaudio.c:1879:10: warning: passing argument 1 of 'iounmap' discards 'volatile' qualifier from pointer target type [-Wdiscarded-qualifiers]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Building an allmodconfig kernel fails horribly because of
endian mismatch. It turns out that the -mlittle-endian
switch was not honored at all as we were using the wrong
Kconfig symbol and failing to apply CPUFLAGS to the CFLAGS.
Finally, the linker flags did not get set right.
This addresses all three of those issues, which now lets
me build both big-endian and little-endian kernels for
testing.
Fixes: 428dbf156c ("arch: change default endian for microblaze")
Fixes: 206d3642d8 ("arch/microblaze: add choice for endianness and update Makefile")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Commit 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush
settings") uses u64 in asm/hvcall.h without including linux/types.h
This breaks hvcall.h users that do not include the header themselves.
Fixes: 6e032b350c ("powerpc/powernv: Check device-tree for RFI flush settings")
Signed-off-by: Michal Suchanek <msuchanek@suse.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Expose the state of the RFI flush (enabled/disabled) via debugfs, and
allow it to be enabled/disabled at runtime.
eg: $ cat /sys/kernel/debug/powerpc/rfi_flush
1
$ echo 0 > /sys/kernel/debug/powerpc/rfi_flush
$ cat /sys/kernel/debug/powerpc/rfi_flush
0
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
The recent commit 87590ce6e3 ("sysfs/cpu: Add vulnerability folder")
added a generic folder and set of files for reporting information on
CPU vulnerabilities. One of those was for meltdown:
/sys/devices/system/cpu/vulnerabilities/meltdown
This commit wires up that file for 64-bit Book3S powerpc.
For now we default to "Vulnerable" unless the RFI flush is enabled.
That may not actually be true on all hardware, further patches will
refine the reporting based on the CPU/platform etc. But for now we
default to being pessimists.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The dependency on physical_package_id from the topology to get the
cluster identifier is wrong. The concept of cluster used in ARM topology
is unfortunately not well defined in the architecture, we should avoid
using it. Further the frequency domain need not be mapped to so called
"clusters" one to one.
SCPI already provides means to obtain the frequency domain id from the
device tree. In order to support some new topologies(e.g. DSU which
contains 2 frequency domains within the physical cluster), pseudo
clusters are created to make this driver work which is wrong again.
In order to solve those issues and also remove dependency of topological
physical id for frequency domain, this patch removes the arm_big_little
dependency from scpi driver.
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Since the definition of the term "cluster" is not well defined in the
architecture, we should avoid using it. Also the physical package id
is currently mapped to so called "clusters" in ARM/ARM64 platforms which
is already argumentative.
Currently PSCI checker uses the physical package id assuming that CPU
power domains map to "clusters" and the physical package id in the code
as it stands also maps to cluster boundaries. It does that trying to
test "cluster" idle states to its best. However the CPU power domain
often but not always maps directly to the processor topology.
This patch removes the dependency on physical_package_id from the topology
in this PSCI checker. Also it replaces all the occurences of clusters to
cpu_groups which is derived from core_sibling_mask and may not directly
map to physical "cluster".
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The trailing semicolon is an empty statement that does no operation.
Removing it since it doesn't do anything.
Signed-off-by: Luis de Bethencourt <luisbg@kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
When ACPI Link object is enabled, the message is printed with a warning
prefix. Some test tools are capturing warning and test error types as
errors. Let's reduce the verbosity of success case.
Signed-off-by: Sinan Kaya <okaya@codeaurora.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The current (empty) system sleep callbacks rely on the PM core to force
a runtime resume to reinitialize the DMAC registers during system
resume. Without a reinitialization, e.g. SCIF DMA will hang silently
after a system resume on R-Car Gen3.
Make this explicit by using pm_runtime_force_{suspend,resume}() as the
system sleep callbacks instead. Use SET_LATE_SYSTEM_SLEEP_PM_OPS() as
DMA engines must be initialized before all DMA slave devices.
Fixes: 17218e0092 "PM / genpd: Stop/start devices without pm_runtime_force_suspend/resume()"
Suggested-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The pm_runtime_force_suspend|resume() helpers currently requires the device
to at some level (PM domain, bus, etc), have the ->runtime_suspend|resume()
callbacks assigned for it, else -ENOSYS is returned as an error.
However, there are no reason for this requirement, so let's simply remove
it by allowing these callbacks to be NULL.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Parameter flags is no longer used, remove it.
Signed-off-by: Kyungsik Lee <kyungsik.lee@lge.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
In preparation for adding more conditions for whether IRQ wakeup is
enabled, rework sdhci_enable_irq_wakeups() so that needed bits are added
instead of adding them all and then removing the unneeded bits.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that sdhci_enable_irq_wakeups() is a local function, change it to
return whether the IRQ wakeup was successfully enabled. This is in
preparation for adding more conditions for whether IRQ wakeup is enabled.
Note it is assumed, for SDHCI devices, that suspend is more important than
wakeup, so we continue to suspend regardless.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Now that it is not being used by any drivers, stop exporting it.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
PCI and ACPI determine if a device is wakeup capable, so use that to
determine the MMC_PM_WAKE_SDIO_IRQ capability correctly.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
sdhci_enable_irq_wakeups() is already called by sdhci_suspend_host() so
sdhci-pci should not need to call it. However sdhci_suspend_host() only
calls it if wakeups are enabled, and sdhci-pci does not enable them until
after calling sdhci_suspend_host(). So move the calls to
sdhci_pci_init_wakeup() before calling sdhci_suspend_host(), and
stop calling sdhci_enable_irq_wakeups(). That results in some
simplification because sdhci_pci_suspend_host() and
__sdhci_pci_suspend_host() no longer need to be separate functions.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Expand INIT_STRUCT_PID in the single place that uses it and then remove it.
There doesn't seem any point in the macro.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
There doesn't seem to be any need to have the INIT_SIGNALS and INIT_SIGHAND
macros, so expand them in their single places of use and remove them.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Expand various INIT_* macros into the single places they're used in
init/init_task.c and remove them.
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Tony Luck <tony.luck@intel.com>
Tested-by: Will Deacon <will.deacon@arm.com> (arm64)
Tested-by: Palmer Dabbelt <palmer@sifive.com>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
