Add a selftest to exercise the powerpc alignment fault handler.
Signed-off-by: Michael Neuling <mikey@neuling.org>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
[mpe: Add 32-bit support to the signal handler]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Symbolic macros are unintuitive and hard to read, whereas octal constants
are much easier to interpret. Replace macros for the basic permission
flags (user/group/other read/write/execute) with numeric constants
instead, across the whole powerpc tree.
Introducing a significant number of changes across the tree for no runtime
benefit isn't exactly desirable, but so long as these macros are still
used in the tree people will keep sending patches that add them. Not only
are they hard to parse at a glance, there are multiple ways of coming to
the same value (as you can see with 0444 and 0644 in this patch) which
hurts readability.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Reviewed-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull x86 kexec fix from Thomas Gleixner:
"A single fix for the WBINVD issue introduced by the SME support which
causes kexec fails on non AMD/SME capable CPUs. Issue WBINVD only when
the CPU has SME and avoid doing so in a loop"
[ Side note: this patch fixes the problem, but it isn't entirely clear
why it is required. The wbinvd should just work regardless, but there
seems to be some system - as opposed to CPU - issue, since the wbinvd
causes more problems later in the shutdown sequence, but wbinvd
instructions while the system is still active are not problematic.
Possibly some SMI or pending machine check issue on the affected system ]
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm: Rework wbinvd, hlt operation in stop_this_cpu()
Pull irq fix from Thomas Gleixner:
"A single fix for the new matrix allocator to prevent vector exhaustion
by certain network drivers which allocate gazillions of unused vectors
which cannot be put into reservation mode due to MSI and the lack of
MSI entry masking.
The fix/workaround is to spread the vectors across CPUs by searching
the supplied target CPU mask for the CPU with the smallest number of
allocated vectors"
* 'irq-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irq/matrix: Spread interrupts on allocation
The C-based config programs are properly guarded from a missing (or,
currently, external) libintl.h by the HOST_EXTRACFLAGS check, but
this does not help the C++-based qconf.
Signed-off-by: Yaakov Selkowitz <yselkowi@redhat.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that the last two cases refer to menus and ifs,
respectively, in the conditional that sets 'parentdep'.
Automatic submenu creation is done later, so the parent can't be a
symbol here.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It is not obvious that this might refer to an 'if', making the code
pretty cryptic:
if (menu->list && (!menu->prompt || !menu->prompt->text)) {
Kconfig keeps the 'if' menu nodes even after flattening. Reflect that in
the example to be accurate.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Pablo Neira Ayuso says:
====================
Netfilter/IPVS updates for net-next
The following patchset contains Netfilter/IPVS updates for your net-next
tree. Basically, a new extension for ip6tables, simplification work of
nf_tables that saves us 500 LoC, allow raw table registration before
defragmentation, conversion of the SNMP helper to use the ASN.1 code
generator, unique 64-bit handle for all nf_tables objects and fixes to
address fallout from previous nf-next batch. More specifically, they
are:
1) Seven patches to remove family abstraction layer (struct nft_af_info)
in nf_tables, this simplifies our codebase and it saves us 64 bytes per
net namespace.
2) Add IPv6 segment routing header matching for ip6tables, from Ahmed
Abdelsalam.
3) Allow to register iptable_raw table before defragmentation, some
people do not want to waste cycles on defragmenting traffic that is
going to be dropped, hence add a new module parameter to enable this
behaviour in iptables and ip6tables. From Subash Abhinov
Kasiviswanathan. This patch needed a couple of follow up patches to
get things tidy from Arnd Bergmann.
4) SNMP helper uses the ASN.1 code generator, from Taehee Yoo. Several
patches for this helper to prepare this change are also part of this
patch series.
5) Add 64-bit handles to uniquely objects in nf_tables, from Harsha
Sharma.
6) Remove log message that several netfilter subsystems print at
boot/load time.
7) Restore x_tables module autoloading, that got broken in a previous
patch to allow singleton NAT hook callback registration per hook
spot, from Florian Westphal. Moreover, return EBUSY to report that
the singleton NAT hook slot is already in instead.
8) Several fixes for the new nf_tables flowtable representation,
including incorrect error check after nf_tables_flowtable_lookup(),
missing Kconfig dependencies that lead to build breakage and missing
initialization of priority and hooknum in flowtable object.
9) Missing NETFILTER_FAMILY_ARP dependency in Kconfig for the clusterip
target. This is due to recent updates in the core to shrink the hook
array size and compile it out if no specific family is enabled via
.config file. Patch from Florian Westphal.
10) Remove duplicated include header files, from Wei Yongjun.
11) Sparse warning fix for the NFPROTO_INET handling from the core
due to missing static function definition, also from Wei Yongjun.
12) Restore ICMPv6 Parameter Problem error reporting when
defragmentation fails, from Subash Abhinov Kasiviswanathan.
13) Remove obsolete owner field initialization from struct
file_operations, patch from Alexey Dobriyan.
14) Use boolean datatype where needed in the Netfilter codebase, from
Gustavo A. R. Silva.
15) Remove double semicolon in dynset nf_tables expression, from
Luis de Bethencourt.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
It's easy to miss that choices are special-cased to pass on their mode
as the parent dependency.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Not obvious, especially if you don't already know how choices are
implemented.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Kconfig was the only user of these. With Kconfig converted to use
the default 'yy' prefix, we do not need them any more.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
Flex and Bison provide an option to change the prefix of globally-
visible symbols. This is useful to link multiple lexers and/or
parsers into the same executable. However, Kconfig (and any other
host programs in kernel) uses a single lexer and parser. I do not
see a good reason to change the default 'yy' prefix.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Ulf Magnusson <ulfalizer@gmail.com>
conf_unsaved is initialized by conf_read_simple(), but it is possible
to move it to conf_read() so that it can be a local variable.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Sparse reports:
warning: symbol 'xfgets' was not declared. Should it be static?
It is declared as static, but it is missing in the definition part.
Move the definition up and remove the forward declaration.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Avoids mistakes like in the following real-world example, where only the
final help string ("Say Y...") was used. This particular example was
fixed in commit 561b29e4ec ("media: fix media Kconfig help syntax
issues").
config DVB_NETUP_UNIDVB
...
select DVB_CXD2841ER if MEDIA_SUBDRV_AUTOSELECT
---help---
Support for NetUP PCI express Universal DVB card.
help
Say Y when you want to support NetUP Dual Universal DVB card
...
This now prints the following warning:
drivers/media/pci/netup_unidvb:13: warning: 'DVB_NETUP_UNIDVB' defined with more than one help text -- only the last one will be used
Also free() any extra help strings.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
No more users of this keyword. Drop it according to the notice by
commit 6341e62b21 ("kconfig: use bool instead of boolean for type
definition attributes").
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Luis R. Rodriguez <mcgrof@kernel.org>
Commit 6341e62b21 ("kconfig: use bool instead of boolean for type
definition attributes") did treewide replacement of 'boolean', and
also mentioned the keyword 'boolean' would be dropped later on.
Some years have passed, but it has not happened yet. Meanwhile, some
new instances have come up.
I am really going to drop this keyword. I need to do the replacement
once again.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
menu_end_entry() is empty and completely unused as far as I can tell:
$ git log -G menu_end_entry --oneline
a02f057 [PATCH] kconfig: improve error handling in the parser
1da177e Linux-2.6.12-rc2
Last one is the initial Git commit, where menu_end_entry() is empty as
well. I couldn't find anything that redefined it on Google either.
It might be a debugging helper for setting a breakpoint after each
config, menuconfig, and comment is parsed. IMO it hurts more than it
helps in that case by making the parsing code look more complicated at a
glance than it really is, and I suspect it doesn't get used much.
Tested by running the Kconfiglib test suite, which indirectly verifies
that the .config files generated by the C implementation for each
defconfig file in the kernel stays the same.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Many of these functions are quite the head scratchers if you don't know
what they're trying to do. Document them.
Also make it clear which functions rewrite expressions in-place and
which return new expressions. This prevents memory errors.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
It's tricky to figure out what it does (and how) without staring at the
code for a long time. Document it to make it more transparent.
No functional changes. Only comments added.
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
When propagating dependencies from parents after parsing, an expression
node is allocated if the parent symbol is a 'choice'. This node was
never freed.
Outline of leak:
if (sym && sym_is_choice(sym)) {
...
*Allocate (in this case only)*
parentdep = expr_alloc_symbol(sym);
} else if (parent->prompt)
parentdep = parent->prompt->visible.expr;
else
parentdep = parent->dep;
for (menu = parent->list; menu; menu = menu->next) {
...
*Copy*
basedep = expr_alloc_and(expr_copy(parentdep), basedep);
...
}
*parentdep lost if the parent is a choice!*
Fix by freeing 'parentdep' after the loop if the parent symbol is a
choice. Note that this only frees the expression node and not the choice
symbol itself.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 1,608 bytes in 67 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 0 bytes in 0 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Only the E_NOT operand and not the E_NOT node itself was freed, due to
accidentally returning too early in expr_free(). Outline of leak:
switch (e->type) {
...
case E_NOT:
expr_free(e->left.expr);
return;
...
}
*Never reached, 'e' leaked*
free(e);
Fix by changing the 'return' to a 'break'.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 44,448 bytes in 1,852 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 1,608 bytes in 67 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
expr_trans_compare() always allocates and returns a new expression,
giving the following leak outline:
...
*Allocate*
basedep = expr_trans_compare(basedep, E_UNEQUAL, &symbol_no);
...
for (menu = parent->next; menu; menu = menu->next) {
...
*Copy*
dep2 = expr_copy(basedep);
...
*Free copy*
expr_free(dep2);
}
*basedep lost!*
Fix by freeing 'basedep' after the loop.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 344,376 bytes in 14,349 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 44,448 bytes in 1,852 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
If a 'mainmenu' entry appeared in the Kconfig files, two things would
leak:
- The 'struct property' allocated for the default "Linux Kernel
Configuration" prompt.
- The string for the T_WORD/T_WORD_QUOTE prompt after the
T_MAINMENU token, allocated on the heap in zconf.l.
To fix it, introduce a new 'no_mainmenu_stmt' nonterminal that matches
if there's no 'mainmenu' and adds the default prompt. That means the
prompt only gets allocated once regardless of whether there's a
'mainmenu' statement or not, and managing it becomes simple.
Summary from Valgrind on 'menuconfig' (ARCH=x86) before the fix:
LEAK SUMMARY:
definitely lost: 344,568 bytes in 14,352 blocks
...
Summary after the fix:
LEAK SUMMARY:
definitely lost: 344,440 bytes in 14,350 blocks
...
Signed-off-by: Ulf Magnusson <ulfalizer@gmail.com>
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
The __memzero assembly code is almost identical to memset's except for
two orr instructions. The runtime performance of __memset(p, n) and
memset(p, 0, n) is accordingly almost identical.
However, the memset() macro used to guard against a zero length and to
call __memzero at compile time when the fill value is a constant zero
interferes with compiler optimizations.
Arnd found tha the test against a zero length brings up some new
warnings with gcc v8:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82103
And successively rremoving the test against a zero length and the call
to __memzero optimization produces the following kernel sizes for
defconfig with gcc 6:
text data bss dec hex filename
12248142 6278960 413588 18940690 1210312 vmlinux.orig
12244474 6278960 413588 18937022 120f4be vmlinux.no_zero_test
12239160 6278960 413588 18931708 120dffc vmlinux.no_memzero
So it is probably not worth keeping __memzero around given that the
compiler can do a better job at inlining trivial memset(p,0,n) on its
own. And the memset code already handles a zero length just fine.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Acked-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Discarding the memblock arrays usually works, but causes problems
with kexec, as pointed out by this kbuild warning:
WARNING: vmlinux.o(.text+0x7c60): Section mismatch in reference from the function machine_kexec_prepare() to the function .meminit.text:memblock_is_region_memory()
This lets us keep the memblock structures around whenever kexec
is enabled, but otherwise still drops them.
Fixes: cf1b09908a ("ARM: 8693/1: discard memblock arrays when possible")
Acked-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Without this tag, we get a build warning:
WARNING: modpost: missing MODULE_LICENSE() in arch/arm/common/bL_switcher_dummy_if.o
For completeness, I'm also adding author and description fields.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
refcount_t overflow detection is implemented as two way.
1. REFCOUNT_FULL
- It means the full refcount_t implementation
which has validation but is slightly slower.
- (fd25d19f6b ("locking/refcount:
Create unchecked atomic_t implementation"))
2. ARCH_HAS_REFCOUNT
- refcount_t overflow detection can be optimized
via an arch-dependent way.
- It is based on atomic_t infrastructure
with some instruction added for detection.
- It is faster than REFCOUNT_FULL,
as fast as unprotected atomic_t infrastructure.
- (7a46ec0e2f ("locking/refcounts, x86/asm:
Implement fast refcount overflow protection"))
ARCH_HAS_REFCOUNT has implemented for x86,
not implemented for others.
In the case of arm64,
Will Deacon said he didn't want the specialized
"fast but technically incomplete" refcounting as seen with x86's.
But rather to set REFCOUNT_FULL by default
because no one could point to real-world performance impacts with
REFCOUNT_FULL vs unprotected atomic_t infrastructure.
This is the reason arm64 ended up enabling REFCOUNT_FULL.
(4adcec1164 ("arm64: Always use REFCOUNT_FULL"))
As with the decision of arm64,
arm can set REFCOUNT_FULL by default.
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
The new conditionally compiled code leaves some labels and one
variable unreferenced when CONFIG_HOTPLUG_CPU and CONFIG_PM_SLEEP
are disabled:
arch/arm/mm/cache-b15-rac.c: In function 'b15_rac_init':
arch/arm/mm/cache-b15-rac.c:353:1: error: label 'out_unmap' defined but not used [-Werror=unused-label]
out_unmap:
^~~~~~~~~
arch/arm/mm/cache-b15-rac.c:351:1: error: label 'out_cpu_dead' defined but not used [-Werror=unused-label]
out_cpu_dead:
^~~~~~~~~~~~
At top level:
arch/arm/mm/cache-b15-rac.c:53:12: error: 'rac_config0_reg' defined but not used [-Werror=unused-variable]
This replaces the existing #ifdef conditionals with IS_ENABLED()
checks that let the compiler figure out for itself which code to
drop.
Fixes: 55de88778f ("ARM: 8726/1: B15: Add CPU hotplug awareness")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
adjust_lowmem_bounds() called twice which can lead to stalled data
(i.e. subreg) value in mem[] array after the first call.
Zero out mem[] array before we allocate MPU regions for memory.
Fixes: 5c9d9a1b3a ("ARM: 8712/1: NOMMU: Use more MPU regions to cover memory")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
With switch to dynamic exception base address setting, VBAR/Hivecs
set only for boot CPU, but secondaries stay unaware of that. That
might lead to weird effects when trying up to bring up secondaries.
Fixes: ad475117d2 ("ARM: 8649/2: nommu: remove Hivecs configuration is asm")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Acked-by: afzal mohammed <afzal.mohd.ma@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
While running MPS2 platform (NOMMU) with DTB placed below PHYS_OFFSET
following warning poped up:
------------[ cut here ]------------
WARNING: CPU: 0 PID: 0 at arch/arm/mm/physaddr.c:42 __virt_to_phys+0x2f/0x40
virt_to_phys used for non-linear address: 00004000 (0x4000)
CPU: 0 PID: 0 Comm: swapper Not tainted 4.15.0-rc1-5a31bf2-clean+ #2767
Hardware name: MPS2 (Device Tree Support)
[<2100bf39>] (unwind_backtrace) from [<2100b3ff>] (show_stack+0xb/0xc)
[<2100b3ff>] (show_stack) from [<2100e697>] (__warn+0x87/0xac)
[<2100e697>] (__warn) from [<2100e6db>] (warn_slowpath_fmt+0x1f/0x28)
[<2100e6db>] (warn_slowpath_fmt) from [<2100c603>] (__virt_to_phys+0x2f/0x40)
[<2100c603>] (__virt_to_phys) from [<2116a499>] (early_init_fdt_reserve_self+0xd/0x24)
[<2116a499>] (early_init_fdt_reserve_self) from [<2116222d>] (arm_memblock_init+0xb5/0xf8)
[<2116222d>] (arm_memblock_init) from [<21161cad>] (setup_arch+0x38b/0x50e)
[<21161cad>] (setup_arch) from [<21160455>] (start_kernel+0x31/0x280)
[<21160455>] (start_kernel) from [<00000000>] ( (null))
random: get_random_bytes called from init_oops_id+0x17/0x2c with crng_init=0
---[ end trace 0000000000000000 ]---
Platforms without MMU support run with 1:1 (i.e. linear) memory
mapping, so disable CONFIG_DEBUG_VIRTUAL.
Fixes: e377cd8221 ("ARM: 8640/1: Add support for CONFIG_DEBUG_VIRTUAL")
Signed-off-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Page mappings with full RWX permissions are a security risk.
x86, arm64 has an option to walk the page tables
and dump any bad pages.
(1404d6f13e
("arm64: dump: Add checking for writable and exectuable pages"))
Add a similar implementation for arm.
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch makes the page table dumping seq_file optional.
It makes the page table dumping code usable for other cases.
This patch refers below commit of arm64.
(ae5d1cf358
("arm64: dump: Make the page table dumping seq_file optional"))
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Acked-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
This patch refactors the arm page table dumping code,
so multiple tables may be registered with the framework.
This patch refers below commits of arm64.
(4674fdb9f1 ("arm64: mm: dump: make page table dumping reusable"))
(4ddb9bf833 ("arm64: dump: Make ptdump debugfs a separate option"))
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Laura Abbott <labbott@redhat.com>
Reviewed-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Jinbum Park <jinb.park7@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Improve the DTS files by removing all the leading "0x" and zeros to
fix the following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and:
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -E -i -e "s/@0x([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" -e "s/@0+([0-9a-fA-F\.]+)\s?\{/@\L\1 \{/g" {} +
For simplicity, two sed expressions were used to solve each warnings
separately.
To make the regex expression more robust a few other issues were
resolved, namely setting unit-address to lower case, and adding a
whitespace before the the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This is a follow up to commit 4c9847b737 ("dt-bindings: Remove
leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix warnings such as:
arch/powerpc/platforms/powermac/backlight.c: In function ‘pmac_backlight_get_legacy_brightness’:
arch/powerpc/platforms/powermac/backlight.c:189:5: error: old-style function definition [-Werror=old-style-definition]
int pmac_backlight_get_legacy_brightness()
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In commit 5b102782c7 ("powerpc/xmon: Enable disassembly files (compilation
changes)") usage of variable `op` has been removed. Completely remove opcode
computation since not used anymore.
Fix fatal warning:
arch/powerpc/xmon/ppc-dis.c: In function ‘lookup_powerpc’:
arch/powerpc/xmon/ppc-dis.c:96:17: error: variable ‘op’ set but not used [-Werror=unused-but-set-variable]
unsigned long op;
^~
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Fix fatal warning during compilation:
In file included from arch/powerpc/xmon/xmon.c:54:0:
./arch/powerpc/include/asm/xive.h:157:20: error: no previous prototype for ‘xive_smp_prepare_cpu’ [-Werror=missing-prototypes]
extern inline int xive_smp_prepare_cpu(unsigned int cpu) { return -EINVAL; }
^
Signed-off-by: Mathieu Malaterre <malat@debian.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This patch adds --pgfault and --iterations options to mmap_bench test. With
--pgfault we touch every page mapped. This helps in measuring impact in the
page fault path with a patch series.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
One of the easiest way to test config with 4K HPTE is to disable 64K hardware
page size like below.
int __init htab_dt_scan_page_sizes(unsigned long node,
size -= 3; prop += 3;
base_idx = get_idx_from_shift(base_shift);
- if (base_idx < 0) {
+ if (base_idx < 0 || base_idx == MMU_PAGE_64K) {
/* skip the pte encoding also */
prop += lpnum * 2; size -= lpnum * 2;
But then this results in error in other part of the code such as MPSS parsing
where we look at 4K base page size and 64K actual page size support.
This patch fix MPSS parsing by ignoring the actual page sizes marked
unsupported. In reality this can happen only with a corrupt device tree. But it
is good to tighten the error check.
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Merge our fixes branch from the 4.15 cycle.
Unusually the fixes branch saw some significant features merged,
notably the RFI flush patches, so we want the code in next to be
tested against that, to avoid any surprises when the two are merged.
There's also some other work on the panic handling that was reverted
in fixes and we now want to do properly in next, which would conflict.
And we also fix a few other minor merge conflicts.
Starting with Family 16h Models 30h-3Fh and Family 15h Models 60h-6Fh,
watchdog address space decoding has changed. The cutover point is already
identified in the i2c-piix2 driver, so use the same mechanism.
Cc: Zoltán Böszörményi <zboszor@pr.hu>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
