Fix following coccicheck warning:
drivers/gpu/drm/msm/msm_gpu_devfreq.c:72:1-7: WARNING: do_div() does a 64-by-32 division, please consider using div64_ul instead.
Use div64_ul instead of do_div to avoid a possible truncation.
Signed-off-by: Wan Jiabing <wanjiabing@vivo.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Acked-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Patchwork: https://patchwork.freedesktop.org/patch/483499/
Link: https://lore.kernel.org/r/20220426132126.686447-1-wanjiabing@vivo.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The DEFINE_DRM_GEM_FOPS() helper is a bit limiting if a driver wants to
provide additional file ops, like show_fdinfo().
v2: Split out DRM_GEM_FOPS instead of making DEFINE_DRM_GEM_FOPS
varardic
v3: nits
Signed-off-by: Rob Clark <robdclark@chromium.org>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Patchwork: https://patchwork.freedesktop.org/patch/488904/
Link: https://lore.kernel.org/r/20220609174213.2265938-1-robdclark@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The next call to sii8620_burst_get_tx_buf will result in off-by-one
When ctx->burst.tx_count + size == ARRAY_SIZE(ctx->burst.tx_buf). The same
thing happens in sii8620_burst_get_rx_buf.
This patch also change tx_count and tx_buf to rx_count and rx_buf in
sii8620_burst_get_rx_buf. It is unreasonable to check tx_buf's size and
use rx_buf.
Fixes: e19e9c692f ("drm/bridge/sii8620: add support for burst eMSC transmissions")
Signed-off-by: Hangyu Hua <hbh25y@gmail.com>
Reviewed-by: Andrzej Hajda <andrzej.hajda@intel.com>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20220518065856.18936-1-hbh25y@gmail.com
Struct mdp4_platform_config is a relict from the DT-conversion time.
Move the max_clk field to the mdp4_kms_init(), the place where it is
used and drop the struct mdp4_platform_config and the mdp4_get_config()
function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485050/
Link: https://lore.kernel.org/r/20220505135008.1351533-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There might be a chain of bridges attached to the HDMI node
(including but not limited to the display-connector bridge). Add support
for attaching them right to the HDMI bridge chain.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/489709/
Link: https://lore.kernel.org/r/20220616085057.432353-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The MSM HDMI driver has support for hpd_regs on 8x74/8084: supply
regulators that are to be enabled for HPD to work. Currently these
regulators contain the hpd_gdsc, which was replaced by the power-domains
support and hpd-5v/hpd-5v-en, which are not used by the chip itself.
They power up the ESD bridge.
However it is a separate device which should be represented separately
in the device tree.
None of upstreamed devices support these properties. Thus drop support
for them from the HDMI driver.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488860/
Link: https://lore.kernel.org/r/20220609122350.3157529-10-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
DB820c makes use of core-vcc-supply and core-vdda-supply, however the
driver code doesn't support these regulators. Enable them for HDMI on
8996 platform.
Fixes: 0afbe59edd ("drm/msm/hdmi: Add basic HDMI support for msm8996")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488857/
Link: https://lore.kernel.org/r/20220609122350.3157529-8-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The HDMI driver has code to configure extra GPIOs, which predates
pinctrl support. Nowadays all platforms should use pinctrl instead.
Neither of upstreamed Qualcomm platforms uses these properties, so it's
safe to drop them.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488858/
Link: https://lore.kernel.org/r/20220609122350.3157529-7-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
hdmi-mux-supply is not used by the SoC's HDMI block, it is thought to
power up the external logic. Thus it should not be a part of HDMI
bindings, but it should be declared at some other device in the DT (like
HDMI mux, bridge, etc). Mark it as deprecated.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488870/
Link: https://lore.kernel.org/r/20220609122350.3157529-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Mark obsolete GPIO properties as deprecated. They are not used by
existing device trees. While we are at it, also drop them from the
schema example.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488852/
Link: https://lore.kernel.org/r/20220609122350.3157529-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Convert Qualcomm HDMI binding into HDMI TX and PHY yaml bindings.
Changes to schema:
HDMI:
- fixed reg-names numbering to match 0..3 instead 0,1,3,4
- dropped qcom,tx-ddc-* from example, they were not documented
- make phy-names deprecated, drop it from the examples
PHY:
- moved into phy/ directory
- split into QMP and non-QMP PHY schemas
Co-developed-by: David Heidelberg <david@ixit.cz>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488850/
Link: https://lore.kernel.org/r/20220609122350.3157529-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
If for some reason the msm_dp_config::descs array starts from non-zero
index or contains the hole, setting the msm_dp_config::num_descs might
be not that obvious and error-prone. Use ARRAY_SIZE to set this field
rather than encoding the value manually.
Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491399/
Link: https://lore.kernel.org/r/20220627165413.657142-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
There is currently two function for performing reset: dsi_sw_reset and
dsi_sw_reset_restore. Only difference between those is that latter one
assumes that DSI controller is enabled. In contrary former one assumes
that controller is disabled and executed during power-on. However this
assumtion is not true mobile devices which have boot splash set up by
boot-loader.
This patch removes dsi_sw_reset_restore and makes dsi_sw_reset disable
DSI controller during reset sequence if it's enabled.
Signed-off-by: Vladimir Lypak <vladimir.lypak@gmail.com>
Signed-off-by: Luca Weiss <luca@z3ntu.xyz>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489152/
Link: https://lore.kernel.org/r/20220610220259.220622-1-luca@z3ntu.xyz
[DB: fixed the typo in the commit message]
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Conversion to use bulk regulator API omitted filling the pwr_regs with
proper regulator IDs. This was left unnoticed, since none of my testing
platforms has used the pwr_regs. Fix this by propagating regulator ids
properly.
Fixes: 31b3b1f5e3 ("drm/msm/hdmi: use bulk regulator API")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/488847/
Link: https://lore.kernel.org/r/20220609113148.3149194-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We don't need to stash the encoder here. Instead we can simply pass it
around as an argument.
Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491187/
Link: https://lore.kernel.org/r/20220625002811.3225344-1-swboyd@chromium.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Make dp_connector_mode_valid() return precise MODE_CLOCK_HIGH rather
than generic MODE_BAD in case the mode clock is higher than
DP_MAX_PIXEL_CLK_KHZ (675 MHz).
Reviewed-by: Kuogee Hsieh<quic_khsieh@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489554/
Link: https://lore.kernel.org/r/20220615115920.6768-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Remove extra nestting level from the dpu_encoder_get_intf(), replacing it
with the explicit return in case the INTF_WB was passed to the function.
While we are at it, also change dpu_encoder_get_wb() to also use
explicit return rather than the goto.
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/491189/
Link: https://lore.kernel.org/r/20220625003028.383259-1-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
We're supposed to list the supplies in the dt bindings but there are
none in the DP controller bindings. Looking at the Linux driver and
existing device trees, we can see that two supplies are expected:
- vdda-0p9-supply
- vdda-1p2-supply
Let's list them both in the bindings. Note that the datasheet for
sc7280 doesn't describe these supplies very verbosely. For the 0p9
supply, for instance, it says "Power for eDP 0.9 V circuits". This
this is obvious from the property name, we don't bother cluttering the
bindings with a description.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Sankeerth Billakanti <quic_sbillaka@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/483373/
Link: https://lore.kernel.org/r/20220425140619.1.Ibfde5a26a7182c4b478d570c23d2649823ac2cce@changeid
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for writing CRC values for the interface block to
the debugfs by calling the necessary MISR setup/collect methods.
Changes since V1:
- Set values_cnt to only include phys with backing hw_intf
- Loop over all drm_encs connected to crtc
Changes since V2:
- Remove vblank.h inclusion
- Change `pos + i` to `pos + entries`
- Initialize values_cnt to 0 for encoder
- Change DPU_CRTC_CRC_SOURCE_INTF to DPU_CRTC_CRC_SOURCE_ENCODER (and
"intf" to "enc")
- Change dpu_encoder_get_num_phys to dpu_encoder_get_num_hw_intfs
- Add checks for setup_misr and collect_misr in
dpu_encoder_get_num_hw_intfs
Changes since V3:
- Remove extra whitespace
- Change "enc" to "encoder"
- Move crcs array to dpu_crtc_get_encoder_crc
- Rename dpu_encoder_get_num_hw_intfs to dpu_encoder_get_crc_values_cnt
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490736/
Link: https://lore.kernel.org/r/20220622171835.7558-5-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Add support for setting MISR registers within the interface
Changes since V1:
- Replaced dpu_hw_intf collect_misr and setup_misr implementations with
calls to dpu_hw_utils helper methods
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490730/
Link: https://lore.kernel.org/r/20220622171835.7558-4-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move layer mixer specific MISR methods to generalized helper methods.
This will make it easier to add CRC support for other blocks in the
future.
Changes since V2:
- Reordered parameters so that offsets are after hw_blk_reg_map
- Fixed mismatched whitespace in bitmask definitions
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490732/
Link: https://lore.kernel.org/r/20220622171835.7558-3-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
"ctrl_link" is the clock from DP_CTRL_PM module. The result of setting
the rate for it would be a call to dev_pm_opp_set_rate(). Instead of
saving the rate inside struct dss_module_power, call the
devm_pm_opp_set_rate() directly.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/474712/
Link: https://lore.kernel.org/r/20220217055529.499829-3-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Move layer mixer-specific section of dpu_crtc_get_crc() into a separate
helper method. This way, we can make it easier to get CRCs from other HW
blocks by adding other get_crc helper methods.
Changes since V1:
- Move common bitmasks to dpu_hw_util.h
- Move common CRC methods to dpu_hw_util.c
- Update copyrights
- Change crcs array to a dynamically allocated array and added it as a
member of crtc_state
Changes since V2:
- Put changes for hw_util into a separate commit
- Revert crcs array to a static array
- Add else case for set_crc_source to return EINVAL if no valid source
is selected
- Add DPU_CRTC_MAX_CRC_ENTRIES macro
Changes since V3:
- Move crcs array into dpu_crtc_get_lm_crc
- Remove comment about crcs array in dpu_crtc_state struct
- Revert `lm` rename
- Remove DPU_CRTC_MAX_CRC_ENTRIES macro
- Return EINVAL in dpu_crtc_get_crc if no valid CRC source is set
Signed-off-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/490735/
Link: https://lore.kernel.org/r/20220622171835.7558-2-quic_jesszhan@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Writeback block for sm8250 was using the default maxlinewidth
of 2048. But this is not right as it supports upto 4096.
This should have no effect on most resolutions as we are
still limiting upto maxlinewidth of SSPP for adding the modes.
Fix the maxlinewidth for writeback block on sm8250.
changes in v3:
- correct the Fixes tag
Fixes: 53324b99bd ("drm/msm/dpu: add writeback blocks to the sm8250 DPU catalog")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489887/
Link: https://lore.kernel.org/r/1655406084-17407-2-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
intf and wb resources are not dependent on the rm global
state so need not be allocated during dpu_encoder_virt_atomic_mode_set().
Move the allocation of intf and wb resources to dpu_encoder_setup_display()
so that we can utilize the hw caps even during atomic_check() phase.
Since dpu_encoder_setup_display() already has protection against
setting invalid intf_idx and wb_idx, these checks can now
be dropped as well.
changes in v2:
- add phys->hw_intf and phys->hw_wb checks back
changes in v3:
- correct the Fixes tag
Fixes: e02a559a72 ("drm/msm/dpu: make changes to dpu_encoder to support virtual encoder")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/489885/
Link: https://lore.kernel.org/r/1655406084-17407-1-git-send-email-quic_abhinavk@quicinc.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
After the commit c46f0d6903 ("drm/msm: remove unused hotplug and edid
macros from msm_drv.h") the msm_display_caps enum contains two bits
describing whether the encoder should work in video or command mode.
Drop the enum and replace capabilities field in struct msm_display_info
with boolean is_cmd_mode field.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Patchwork: https://patchwork.freedesktop.org/patch/485454/
Link: https://lore.kernel.org/r/20220507115942.1705872-2-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
The driver should not depend on hw revision for detecting features.
Instead it should use features from the hw catalog. Drop the hwversion
field from struct dpu_mdss_cfg and struct dpu_hw_blk_reg_map.
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/488160/
Link: https://lore.kernel.org/r/20220602202447.1755115-4-dmitry.baryshkov@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
