set number of sample averaging to 128 for both PWR_AVG and VI_AVG
Signed-off-by: Potin Lai <potin.lai@quantatw.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Link: https://lore.kernel.org/r/20220418094827.6185-1-potin.lai@quantatw.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add eeprom (24c26) on each sled for storing sled fru information.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-7-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Add an ioexp node on each sled baseed on DVT schematic, address at 0x41.
P0: SLEDX_SWD_MUX
P1: SLEDX_XRES_SWD_N
P2: SLEDX_CLKREQ_N
P3: SLEDX_PCIE_PWR_EN
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-6-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Update GPIO line names based on DVT schematic
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-5-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable mdio0 bus based on DVT schematic.
TODO: Add Marvell 88E6191 Switch
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-4-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Due to DVT schematic has stable spi signal, switch back to aspeed-smc
driver for improving performance.
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-3-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
Enable ehci0 node for USB2 host feature
Signed-off-by: Potin Lai <potin.lai.pt@gmail.com>
Reviewed-by: Patrick Williams <patrick@stwcx.xyz>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Link: https://lore.kernel.org/r/20220509151118.4899-2-potin.lai.pt@gmail.com
Signed-off-by: Joel Stanley <joel@jms.id.au>
It is possible to stack bridges on top of each other. Consider the
following which makes use of an Ethernet switch:
br1
/ \
/ \
/ \
br0.11 wlan0
|
br0
/ | \
p1 p2 p3
br0 is offloaded to the switch. Above br0 is a vlan interface, for
vlan 11. This vlan interface is then a slave of br1. br1 also has a
wireless interface as a slave. This setup trunks wireless lan traffic
over the copper network inside a VLAN.
A frame received on p1 which is passed up to the bridge has the
skb->offload_fwd_mark flag set to true, indicating that the switch has
dealt with forwarding the frame out ports p2 and p3 as needed. This
flag instructs the software bridge it does not need to pass the frame
back down again. However, the flag is not getting reset when the frame
is passed upwards. As a result br1 sees the flag, wrongly interprets
it, and fails to forward the frame to wlan0.
When passing a frame upwards, clear the flag. This is the Rx
equivalent of br_switchdev_frame_unmark() in br_dev_xmit().
Fixes: f1c2eddf4c ("bridge: switchdev: Use an helper to clear forward mark")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://lore.kernel.org/r/20220518005840.771575-1-andrew@lunn.ch
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In the detach path, the driver calls sysfs_remove_group() for the
groups it believes has been registered. However, if the group was
never previously registered, then this causes a splat.
Instead, compute the groups that should be registered in advance,
and then call sysfs_create_groups(), which registers them all at once.
Update the error handling appropriately.
Fixes: c205d53c49 ("ptp: ocp: Add firmware capability bits for feature gating")
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Jonathan Lemon <jonathan.lemon@gmail.com>
Link: https://lore.kernel.org/r/20220517214600.10606-1-jonathan.lemon@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Set "spi-max-frequency" to 50 MHz for all the flashes under the FMC
controller to ensure the clock frequency is calculated correctly.
Suggested-by: Cédric Le Goater <clg@kaod.org>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Tao Ren <rentao.bupt@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-11-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
All these controllers support at least Dual SPI. Update the DTs.
Reviewed-by: Joel Stanley <joel@jms.id.au>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-10-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
This is compatible with the current driver and addresses issues when
running 'make dt_binding_check'.
Cc: Chin-Ting Kuo <chin-ting_kuo@aspeedtech.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Tested-by: Tao Ren <rentao.bupt@gmail.com>
Tested-by: Jae Hyun Yoo <quic_jaehyoo@quicinc.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Link: https://lore.kernel.org/r/20220509175616.1089346-2-clg@kaod.org
Signed-off-by: Joel Stanley <joel@jms.id.au>
Fix missing backslash, introduced in f62c5acc80. Causes all tests to
not be installed.
Fixes: f62c5acc80 ("selftests/net/forwarding: add missing tests to Makefile")
Signed-off-by: Joachim Wiberg <troglobit@gmail.com>
Acked-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20220518151630.2747773-1-troglobit@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Both sfc/efx_channels.h and sfc/siena/efx_channels.h used the same
wrapper #ifndef EFX_CHANNELS_H, this patch changes the siena define to be
EFX_SIENA_CHANNELS_H to avoid build system confusion.
This fixes the following build break:
drivers/net/ethernet/sfc/ptp.c:2191:28:
error: ‘efx_copy_channel’ undeclared here (not in a function); did you mean ‘efx_ptp_channel’?
2191 | .copy = efx_copy_channel,
Fixes: 6e173d3b4a ("sfc: Copy shared files needed for Siena (part 1)")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Cc: Edward Cree <ecree.xilinx@gmail.com>
Acked-by: Martin Habets <habetsm.xilinx@gmail.com>
Link: https://lore.kernel.org/r/20220518065820.131611-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Christophe says:
====================
octeon_ep: Fix the error handling path of octep_request_irqs()
I send a small serie to ease review and because I'm sighly
less confident with the 2nd patch.
====================
Link: https://lore.kernel.org/r/cover.1652819974.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When taken, the error handling path does not undo correctly what has
already been allocated.
Introduce a new loop index, 'j', in order to simplify the error handling
path and rewrite part of it.
It is now written with the same logic and intermediate variables used
when resources are allocated. This is much more straightforward.
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
'oct->non_ioq_irq_names' is not freed in the error handling path of
octep_request_irqs().
Add the missing kfree().
Fixes: 37d79d0596 ("octeon_ep: add Tx/Rx processing and interrupt support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Veerasenareddy Burru <vburru@marvell.com>
Reviewed-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Josua Mayer says:
====================
adin: add support for clock output
This patch series adds support for configuring the two clock outputs of adin
1200 and 1300 PHYs. Certain network controllers require an external reference
clock which can be provided by the PHY.
One of the replies to v1 was asking why the common clock framework isn't used.
Currently no PHY driver has implemented providing a clock to the network
controller. Instead they rely on vendor extensions to make the appropriate
configuration. For example ar8035 uses qca,clk-out-frequency - this patchset
aimed to replicate the same functionality.
Finally the 125MHz free-running clock is enabled in the device-tree for
SolidRun i.MX6 SoMs, to support revisions 1.9 and later, where the original phy
has been replaced with an adin 1300.
To avoid introducing new warning messages during boot for SoMs before rev 1.9,
the status field of the new phy node is disabled by default, and will be
enabled by U-Boot on demand.
====================
Link: https://lore.kernel.org/r/20220517085143.3749-1-josua@solid-run.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Since SoM revision 1.9 the PHY has been replaced with an ADIN1300,
add an entry for it next to the original.
As Russell King pointed out, additional phy nodes cause warnings like:
mdio_bus 2188000.ethernet-1: MDIO device at address 1 is missing
To avoid this the new node has its status set to disabled. U-Boot will
be modified to enable the appropriate phy node after probing.
The existing ar8035 nodes have to stay enabled by default to avoid
breaking existing systems when they update Linux only.
Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Josua Mayer <josua@solid-run.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add support for selecting the clock via device-tree properties.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. SyncE should be configured dynamically at
runtime, however Linux does not currently have a toggle for this,
so support is explicitly omitted.
Co-developed-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Alvaro Karsz <alvaro.karsz@solid-run.com>
Signed-off-by: Josua Mayer<josua@solid-run.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The ADIN1300 supports generating certain clocks on its GP_CLK pin, as
well as providing the reference clock on CLK25_REF.
Add DT properties to configure both pins.
Technically the phy also supports a recovered 125MHz clock for
synchronous ethernet. However SyncE should be configured dynamically at
runtime, so it is explicitly omitted in this binding.
Signed-off-by: Josua Mayer <josua@solid-run.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
1) Reduce number of hardware offload retries from flowtable datapath
which might hog system with retries, from Felix Fietkau.
2) Skip neighbour lookup for PPPoE device, fill_forward_path() already
provides this and set on destination address from fill_forward_path for
PPPoE device, also from Felix.
4) When combining PPPoE on top of a VLAN device, set info->outdev to the
PPPoE device so software offload works, from Felix.
5) Fix TCP teardown flowtable state, races with conntrack gc might result
in resetting the state to ESTABLISHED and the time to one day. Joint
work with Oz Shlomo and Sven Auhagen.
6) Call dst_check() from flowtable datapath to check if dst is stale
instead of doing it from garbage collector path.
7) Disable register tracking infrastructure, either user-space or
kernel need to pre-fetch keys inconditionally, otherwise register
tracking assumes data is already available in register that might
not well be there, leading to incorrect reductions.
* git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
netfilter: nf_tables: disable expression reduction infra
netfilter: flowtable: move dst_check to packet path
netfilter: flowtable: fix TCP flow teardown
netfilter: nft_flow_offload: fix offload with pppoe + vlan
net: fix dev_fill_forward_path with pppoe + bridge
netfilter: nft_flow_offload: skip dst neigh lookup for ppp devices
netfilter: flowtable: fix excessive hw offload attempts after failure
====================
Link: https://lore.kernel.org/r/20220518213841.359653-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If there are errors while trying to enable the pm in the
bind path, it will lead to unclocked access of hw revision
register thereby crashing the device.
This will not address why the pm_runtime_get_sync() fails
but at the very least we should be able to prevent the
crash by handling the error and bailing out earlier.
changes in v2:
- use pm_runtime_resume_and_get() instead of
pm_runtime_get_sync()
Fixes: 25fdd5933e ("drm/msm: Add SDM845 DPU support")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/486721/
Link: https://lore.kernel.org/r/20220518223407.26147-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
We no longer allow en_mask to be a combination of
pll_en_bit and div_en_mask, so remove pll_en_bit(bit0)
from en_mask to make en_mask a pure en_mask that only
used for pll dividers.
This commit continues the work done in commit 7cc4e1bbe3
("clk: mediatek: Fix asymmetrical PLL enable and disable
control") and commit f384c44754 ("clk: mediatek:
Add configurable enable control to mtk_pll_data") to
clean up en_mask(bit0) default setting.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Mandy Liu <mandyjh.liu@mediatek.com>
Link: https://lore.kernel.org/r/20220513073621.12923-1-mandyjh.liu@mediatek.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Mlwp
-----END PGP SIGNATURE-----
Merge tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block
Pull block fix from Jens Axboe:
"Just a small fix for a missing fifo time assigment for the head
insertion case in mq-deadline"
* tag 'block-5.18-2022-05-18' of git://git.kernel.dk/linux-block:
block/mq-deadline: Set the fifo_time member also if inserting at head
The TCU clock gate on X1000 wasn't requested by the driver and could
be gated automatically later on in boot, which prevents timers from
running and breaks PWM.
Add a workaround to support old device trees that don't specify the
"tcu" clock gate. In this case the kernel will print a warning and
attempt to continue without the clock, which is wrong, but it could
work if "clk_ignore_unused" is in the kernel arguments.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20220412122750.279058-3-aidanmacdonald.0x0@gmail.com
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
-----BEGIN PGP SIGNATURE-----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=6+XM
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit fix from Paul Moore:
"A single audit patch to fix a problem where a task's audit_context was
not being properly reset with io_uring"
* tag 'audit-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit,io_uring,io-wq: call __audit_uring_exit for dummy contexts
-----BEGIN PGP SIGNATURE-----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=pG2a
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"A single SELinux patch to fix an error path that was doing the wrong
thing with respect to freeing memory"
* tag 'selinux-pr-20220518' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix bad cleanup on error in hashtab_duplicate()
Pull ARM SoC fixes from Arnd Bergmann:
"The SoC bug fixes have calmed down sufficiently, there is one minor
update for the MAINTAINERS file, and few bug fixes for dts
descriptions:
- Updates to the BananaPi R2-Pro (rk3568) dts to match production
hardware rather than the prototype version.
- Qualcomm sm8250 soundwire gets disabled on some machines to avoid
crashes
- A number of aspeed SoC specific fixes, addressing incorrect pin
cotrol settings, some values in the romed8hm board, and a revert
for an accidental removal of a DT node"
* 'arm/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: omap: remove me as a maintainer
ARM: dts: aspeed: Add video engine to g6
ARM: dts: aspeed: romed8hm3: Fix GPIOB0 name
ARM: dts: aspeed: romed8hm3: Add lm25066 sense resistor values
ARM: dts: aspeed-g6: fix SPI1/SPI2 quad pin group
ARM: dts: aspeed-g6: add FWQSPI group in pinctrl dtsi
dt-bindings: pinctrl: aspeed-g6: add FWQSPI function/group
pinctrl: pinctrl-aspeed-g6: add FWQSPI function-group
dt-bindings: pinctrl: aspeed-g6: remove FWQSPID group
pinctrl: pinctrl-aspeed-g6: remove FWQSPID group in pinctrl
ARM: dts: aspeed-g6: remove FWQSPID group in pinctrl dtsi
arm64: dts: qcom: sm8250: don't enable rx/tx macro by default
arm64: dts: rockchip: Add gmac1 and change network settings of bpi-r2-pro
arm64: dts: rockchip: Change io-domains of bpi-r2-pro
When build bpf test and install it to another folder, e.g.
make -j10 install -C tools/testing/selftests/ TARGETS="bpf" \
SKIP_TARGETS="" INSTALL_PATH=/tmp/kselftests
The ima_setup.sh is missed in target folder, which makes test_ima failed.
Fix it by adding ima_setup.sh to TEST_PROGS_EXTENDED.
Fixes: 34b82d3ac1 ("bpf: Add a selftest for bpf_ima_inode_hash")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220516040020.653291-1-liuhangbin@gmail.com
Pull misc fixes from Al Viro:
"vhost race fix and a percpu_ref_init-caused cgroup double-free fix.
The latter had manifested as buggered struct mount refcounting - those
are also using percpu data structures, but anything that does percpu
allocations could be hit"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
Fix double fget() in vhost_net_set_backend()
percpu_ref_init(): clean ->percpu_count_ref on failure
The patch has been on list for a while but as it was posted as part of a
thread it was missed.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmKFH38PHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpPk0H/1daPO2HrzU4gYIr1U5RfCoJnhbanJSo2FXa
aXalnj44u3vpqsJ/y9dbz+81IgaX0JewAir6b3+t7E9F66AFaK1lqC1YzmGYYxQw
QTwi/bF5sAAg/Cozdm4RAQbPZqy34vD0d/DoGtlZgfQQrYim0e9v/T51OuhEsha2
dTTIVbODOZ+qtRZ7yIqlDLV6bKtHJ9DLpiY61w8rdf2rebdtW5ZPHd8qfi2btDz8
HbHASwPjOy7+P9b7EzuUmy7PCQXqsin3o2gZlncvQUJ2W7PNiGfaLWwsf2B1HcCG
g5ZyedF6m3ElJmUKqLRAzdphNbpBDPSCx7byRlVzMOWq3pjEnIU=
=6Z4B
-----END PGP SIGNATURE-----
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull mlx5 fix from Michael Tsirkin:
"One last minute fixup
The patch has been on list for a while but as it was posted as part of
a thread it was missed"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
vdpa/mlx5: Use consistent RQT size
We're currently using the x86_64 qemu for i386 builds. While this is not
incorrect, it's probably more sensible to use the i386 one, which will
at least fail properly if we accidentally were to build a 64-bit kernel.
Signed-off-by: David Gow <davidgow@google.com>
Tested-by: Daniel Latypov <dlatypov@google.com>
Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
DRM_MODE_ROTATE_180 was previously marked as supported even
for devices not supporting inline rotation.
This is true because the SSPPs can always flip the image.
After inline rotation support changes, this bit was removed
and kms_rotation_crc IGT test starts skipping now whereas
it was previously passing.
Restore DRM_MODE_ROTATE_180 bit to the supported rotations
list.
Fixes: dabfdd89ea ("add inline rotation support for sc7280")
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Patchwork: https://patchwork.freedesktop.org/patch/485928/
Link: https://lore.kernel.org/r/20220511222710.22394-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Writeback modes were being added according to mode_config.max_width
but this is assigned to double of max_mixer_width.
For compositors/clients using a single SSPP, this will fail
the dpu_plane's atomic check as it checks for max_linewidth.
Limit writeback modes according to max_linewidth to allow
even compositors/clients which use only a single SSPP to
use writeback.
Fixes: 77b001acdc ("drm/msm/dpu: add the writeback connector layer")
Reported-by: Jessica Zhang <quic_jesszhan@quicinc.com>
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Tested-by: Jessica Zhang <quic_jesszhan@quicinc.com> # Trogdor (SC8170)
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/486176/
Link: https://lore.kernel.org/r/20220513225959.19004-1-quic_abhinavk@quicinc.com
Signed-off-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Yanming reported a kernel bug in Bugzilla kernel [1], which can be
reproduced. The bug message is:
The kernel message is shown below:
kernel BUG at fs/inode.c:611!
Call Trace:
evict+0x282/0x4e0
__dentry_kill+0x2b2/0x4d0
dput+0x2dd/0x720
do_renameat2+0x596/0x970
__x64_sys_rename+0x78/0x90
do_syscall_64+0x3b/0x90
[1] https://bugzilla.kernel.org/show_bug.cgi?id=215895
The bug is due to fuzzed inode has both inline_data and encrypted flags.
During f2fs_evict_inode(), as the inode was deleted by rename(), it
will cause inline data conversion due to conflicting flags. The page
cache will be polluted and the panic will be triggered in clear_inode().
Try fixing the bug by doing more sanity checks for inline data inode in
sanity_check_inode().
Cc: stable@vger.kernel.org
Reported-by: Ming Yan <yanming@tju.edu.cn>
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
This patch tries to fix permission consistency issue as all other
mainline filesystems.
Since the initial introduction of (posix) fallocate back at the turn of
the century, it has been possible to use this syscall to change the
user-visible contents of files. This can happen by extending the file
size during a preallocation, or through any of the newer modes (punch,
zero, collapse, insert range). Because the call can be used to change
file contents, we should treat it like we do any other modification to a
file -- update the mtime, and drop set[ug]id privileges/capabilities.
The VFS function file_modified() does all this for us if pass it a
locked inode, so let's make fallocate drop permissions correctly.
Cc: stable@kernel.org
Signed-off-by: Chao Yu <chao.yu@oppo.com>
Signed-off-by: Jaegeuk Kim <jaegeuk@kernel.org>
A previous commit got rid of unnecessary rcu_read_lock() inside the
IRQ disabling queue_lock, but this debug statement was left. It's now
firing since we are indeed not inside a RCU read lock, but we don't
need to be as we're still preempt safe.
Get rid of the check, as we have a lockdep assert for holding the
queue lock right after it anyway.
Link: https://lore.kernel.org/linux-block/46253c48-81cb-0787-20ad-9133afdd9e21@samsung.com/
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Fixes: 77c570a1ea ("blk-cgroup: Remove unnecessary rcu_read_lock/unlock()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It's nonsensical to register a provided buffer ring, if a classic
provided buffer group with the same ID exists. Depending on the order of
which we decide what type to pick, the other type will never get used.
Explicitly disallow it and return an error if this is attempted.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
We use ->buf_pages != 0 to tell if this is a shared buffer ring or a
classic provided buffer group. If we unregister the shared ring and
then attempt to use it, buf_pages is zero yet the classic list head
isn't properly initialized. This causes io_buffer_select() to think
that we have classic buffers available, but then we crash when we try
and get one from the list.
Just initialize the list if we unregister a shared buffer ring, leaving
it in a sane state for either re-registration or for attempting to use
it. And do the same for the initial setup from the classic path.
Fixes: c7fb19428d ("io_uring: add support for ring mapped supplied buffers")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
