Anish Bhatt says:
====================
cxgb4/cxgb4i : Update & use ipv6 handling api
This patch series consolidates and updates the ipv6 api, as well as exports
it for use by upper level drivers dependent on cxgb4
v2: Fix formatting issues in clip_tbl.c
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Get a reference on every ipv6 address we offload to hardware so that it cannot
be prematurely cleared out before cleanup.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch improves on previously added support for ipv6 addresses. The code
is consolidated to a single file and adds an api for use by dependent upper
level drivers such as cxgb4i/iw_cxgb4 etc.
Signed-off-by: Anish Bhatt <anish@chelsio.com>
Signed-off-by: Deepak Singh <deepak.s@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable i2c driver for efm32. The other two changes are just results from
oldconfig after commits
- 08b964ff3c (ARM: 8198/1: make kuser helpers depend on MMU)
- 8357041a69 (of: remove /proc/device-tree)
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Olof Johansson <olof@lixom.net>
- to support ARMv8 based exynos7 SoC
: add initial device tree for pinctrl, PMU, mmc, i2c, rtc,
watchdog, and adc nodes for exynos7 SoC and exynos7 based
espresso board.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)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=09qn
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-64' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung into next/arm64
Merge "Samsung exynos7 updates for v3.20" from Kukjin Kim:
- to support ARMv8 based exynos7 SoC
: add initial device tree for pinctrl, PMU, mmc, i2c, rtc,
watchdog, and adc nodes for exynos7 SoC and exynos7 based
espresso board.
* tag 'samsung-dt-64' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
arm64: Enable ARMv8 based exynos7 SoC support
arm64: dts: Add nodes for mmc, i2c, rtc, watchdog, adc on exynos7
arm64: dts: Add PMU DT node for exynos7 SoC
arm64: dts: Add initial pinctrl support to exynos7
arm64: dts: Add initial device tree support for exynos7
Signed-off-by: Olof Johansson <olof@lixom.net>
We don't need the qat_auth_state structure anymore.
Signed-off-by: Tadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When 32-bit MIPS userspace invokes a syscall indirectly via syscall(number,
arg1, ..., arg7), the kernel looks up the actual syscall based on the given
number, shifts the other arguments to the left, and jumps to the syscall.
If the syscall is interrupted by a signal and indicates it needs to be
restarted by the kernel (by returning ERESTARTNOINTR for example), the
syscall must be called directly, since the number is no longer the first
argument, and the other arguments are now staged for a direct call.
Before shifting the arguments, store the syscall number in pt_regs->regs[2].
This gets copied temporarily into pt_regs->regs[0] after the syscall returns.
If the syscall needs to be restarted, handle_signal()/do_signal() copies the
number back to pt_regs->reg[2], which ends up in $v0 once control returns to
userspace.
Signed-off-by: Ed Swierk <eswierk@skyportsystems.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/8929/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
RAW sockets with hdrinc suffer from contention on rt_uncached_lock
spinlock.
One solution is to use percpu lists, since most routes are destroyed
by the cpu that created them.
It is unclear why we even have to put these routes in uncached_list,
as all outgoing packets should be freed when a device is dismantled.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Fixes: caacf05e5a ("ipv4: Properly purge netdev references on uncached routes.")
Signed-off-by: David S. Miller <davem@davemloft.net>
This was inadvertently dropped from an earlier commit, otherwise
the check against cq_vector == -1 to prevent double free doesn't
make any sense.
Fixes: 2b25d98179
Signed-off-by: Jens Axboe <axboe@fb.com>
For some reason, we made the bandwidth separate flags, which
is rather confusing - a single rate cannot have different
bandwidths at the same time.
Change this to no longer be flags but use a separate field
for the bandwidth ('bw') instead.
While at it, add support for 5 and 10 MHz rates - these are
reported as regular legacy rates with their real bitrate,
but tagged as 5/10 now to make it easier to distinguish them.
In the nl80211 API, the flags are preserved, but the code
now can also clearly only set a single one of the flags.
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
This ensures all stub component are freed when the kernel proper is
done booting, by prefixing the names of all ELF sections that have
the SHF_ALLOC attribute with ".init". This approach ensures that even
implicitly emitted allocated data (like initializer values and string
literals) are covered.
At the same time, remove some __init annotations in the stub that have
now become redundant, and add the __init annotation to handle_kernel_image
which will now trigger a section mismatch warning without it.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Signed-off-by: Matt Fleming <matt.fleming@intel.com>
Most NFS RPCs place their large payload argument at the end of the
RPC header (eg, NFSv3 WRITE). For NFSv3 WRITE and SYMLINK, RPC/RDMA
sends the complete RPC header inline, and the payload argument in
the read list. Data in the read list is the last part of the XDR
stream.
One important case is not like this, however. NFSv4 COMPOUND is a
counted array of operations. A WRITE operation, with its large data
payload, can appear in the middle of the compound's operations
array. Thus NFSv4 WRITE compounds can have header content after the
WRITE payload.
The Linux client, for example, performs an NFSv4 WRITE like this:
{ PUTFH, WRITE, GETATTR }
Though RFC 5667 is not precise about this, the proper way to convey
this compound is to place the GETATTR inline, _after_ the front of
the RPC header. The receiver inserts the read list payload into the
XDR stream after the initial WRITE arguments, and before the GETATTR
operation, thanks to the value of the read list "position" field.
The Linux client currently sends the GETATTR at the end of the
RPC/RDMA read list, which is incorrect. It will be corrected in the
future.
The Linux server currently rejects NFSv4 compounds with inline
content after the read list. For the above NFSv4 WRITE compound, the
NFS compound header indicates there are three operations, but the
server finds nonsense when it looks in the XDR stream for the third
operation, and the compound fails with OP_ILLEGAL.
Move trailing inline content to the end of the XDR buffer's page
list. This presents incoming NFSv4 WRITE compounds to NFSD in the
same way the socket transport does.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
This is a pre-requisite for a subsequent patch.
Read list XDR round-up needs to be done _before_ additional inline
content is copied to the end of the XDR buffer's page list. Move
the logic added by commit e560e3b510 ("svcrdma: Add zero padding
if the client doesn't send it").
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Currently the Linux server can not decode RDMA_NOMSG type requests.
Operations whose length exceeds the fixed size of RDMA SEND buffers,
like large NFSv4 CREATE(NF4LNK) operations, must be conveyed via
RDMA_NOMSG.
For an RDMA_MSG type request, the client sends the RPC/RDMA, RPC
headers, and some or all of the NFS arguments via RDMA SEND.
For an RDMA_NOMSG type request, the client sends just the RPC/RDMA
header via RDMA SEND. The request's read list contains elements for
the entire RPC message, including the RPC header.
NFSD expects the RPC/RMDA header and RPC header to be contiguous in
page zero of the XDR buffer. Add logic in the RDMA READ path to make
the read list contents land where the server prefers, when the
incoming message is a type RDMA_NOMSG message.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
An RPC/RDMA client may send large RPC arguments via a read
list. This is a list of scatter/gather elements which convey
RPC call arguments too large to fit in a small RDMA SEND.
Each entry in the read list has a "position" field, whose value is
the byte offset in the XDR stream where the data in that entry is to
be inserted. Entries which share the same "position" value make up
the same RPC argument. The receiver inserts entries with the same
position field value in list order into the XDR stream.
Currently the Linux NFS/RDMA server cannot handle receiving read
chunks in more than one position, mostly because no current client
sends read lists with elements in more than one position. As a
sanity check, ensure that all received chunks have the same
"rc_position."
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The RDMA reader function doesn't change once an svcxprt_rdma is
instantiated. Instead of checking sc_devcap during every incoming
RPC, set the reader function once when the connection is accepted.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
xdr_start() can return the wrong rmsgp address if an assumption
about how the xdr_buf was constructed changes. When it gets it
wrong, the client receives a reply that has gibberish in the
RPC/RDMA header, preventing it from matching a waiting RPC request.
Instead, make (and document) just one assumption: that the RDMA
header for the client's RPC call is at the start of the first page
in rq_pages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Current convention is to avoid using BUG_ON() in places where an
oops could cause complete system failure.
Replace BUG_ON() call sites in svcrdma with an assertion error
message and allow execution to continue safely.
Some BUG_ON() calls are removed because they have never fired in
production (that we are aware of).
Some WARN_ON() calls are also replaced where a back trace is not
helpful; e.g., in a workqueue task.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
The byte_count argument is not used, and the function is called
only from one place.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nit: remove an unused variable to squelch a compiler warning.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Nit: Fix inconsistent white space in dprintk messages.
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Steve Wise <swise@opengridcomputing.com>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Remove the function renew_client() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
When the SMP channels have been already registered, then print out a
clear WARN_ON message that something went wrong. Also unregister the
existing channels in this case before trying to register new ones.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Replace "unsigned long" by "u32" when handling 32-bit register data.
A.o., this saves 11 * 36 bytes in the static sh_eth_cpu_data structures
when compiling for 64-bit.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
commit b284fbe3b3 ("sh_eth: Fix access to TRSCER register") wanted
to add a .trscer_err_mask value to the R-Car Gen2 family-specific data
structure (r8a779x_data), but it was accidentally added to the
SH7724-specific data structure (sh7724_data).
Presumably this happened due to a patch conflict with commit
d407bc0203 ("sh-eth: Set fdr_value of R-Car SoCs"), which added
another field at the same position.
Move the field setting to fix this.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: b284fbe3b3 ("sh_eth: Fix access to TRSCER register")
Signed-off-by: David S. Miller <davem@davemloft.net>
In boards, the dm9000 chip's power and reset can be controlled by gpio.
It makes sense to add them to the dm9000 driver and let dt be used to
enable power and reset the phy.
Signed-off-by: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com>
Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
while adding vlan in dual EMAC mode, only specific ports should be
subscribed for the vlan, else it will lead to switching mode and
if both ports connected to same switch cpsw will hung as it creates
a network loop. Fixing this by adding only specific ports in case
of dual EMAC.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove the function nlm_encode_fh() that is not used anywhere.
This was partially found by using a static code analysis program called cppcheck.
Signed-off-by: Rickard Strandqvist <rickard_strandqvist@spectrumdigital.se>
Signed-off-by: J. Bruce Fields <bfields@redhat.com>
Whenever Suspend PHY bit is set on DRA7x devices,
USB will not work due to Set EP Configuration command
always failing.
This was only found after a recent commit 2164a47 (usb:
dwc3: set SUSPHY bit for all cores, which will be merged
for v3.19) added a missing *required* step to dwc3
initialization. Synopsys Databook requires that we enable
Suspend PHY bit after initialization but that, unfortunately,
breaks DRA7x.
Note that the same regression was already patched for AM437x.
Reported-by: Roger Quadros <rogerq@ti.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJUsuDQAAoJEHm+PkMAQRiGnecH/0RO9UKnEduOTRPaZGXAjGI8
N0FvNia8qn7f+XnvN62pG/YZZqi2uvuy37vwAXMtS6KXEgaDG9Wq4fVrhOaJ5VgL
QOmPdVGUa+1PuPcMYj/QLIFRfIHvIY/XVZWXrcIyYfQdBAAoJ2q23qx/yFmdyTwf
+enAv+PV4ZVNMEANyN9KS7xX5gPbSDl36AOhm6lXDvrlem4mbnhRuUtYez9R8KTK
VNfkKZQRDOgl4/ns0ndzpAUhaDj1JJGoLRgMXKna33XgtzSEL4XijvImdnoIXp5N
Z98Jc1N5Vg5OcUFeGJC3bRR27m39xoOHQk2ufY43uAIfB3Ez/C7m/r7b50ZVWfs=
=J7TO
-----END PGP SIGNATURE-----
Merge tag 'v3.19-rc4' into next
Merge with mainline to bring in the latest thermal and other changes.
When client changes the type of clock used for the time stamps in input
events flush pending events from the client's queue (since client would not
know which events have old time stamps and which ones have new ones) and
and queue SYN_DROPPED event.
Signed-off-by: Anshul Garg <anshul.g@samsung.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
of_get_named_gpiod_flags fails with -EPROBE_DEFER in cases
where the gpio chip is available and the GPIO translation fails.
This causes drivers to be re-probed erroneusly, and hides the
real problem(i.e. the GPIO number being out of range).
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: Hans Holmberg <hans.holmberg@intel.com>
Reviewed-by: Alexandre Courbot <acourbot@nvidia.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Fix the coding style issue by adding a blank line after declaration
Signed-off-by: Mohammad Jamal <md.jamalmohiuddin@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
This allows checkpatch to validate more DTSes.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Steve Twiss <stwiss.opensource@diasemi.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>
Add MLB+ 3-pin mode pin group to R8A7790 PFC driver.
Based on original patch by Andrey Gusakov <andrey.gusakov@cogentembedded.com>.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Acked-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
X86 Kconfig symbol is X86, not ARCH_X86.
Fixes: c586b3075d5b47d8 (gpio/xilinx: Add support for X86 Arch)
Reported-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Ricardo Ribalda Delgado <ricardo.ribalda@gmail.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Switch the R-Car Gen2 GPIO driver to use the gpiolib irqchip helpers.
While doing this also make sure that gpiochip_irqchip_add() is called
after the gpiochip itself is registered, as required.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
If the call to devm_kzalloc() fails, nothing must be cleant up.
This was missed before because gpio_rcar_probe() had a "return"
statement after the first "goto err0".
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Fixes: df0c6c8023 ("gpio: rcar: Add minimal runtime PM support")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Ensure that when there is an error during probe that the gpiochip is
removed and the generic irq chip is removed.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Wrap some long lines.
Prefer seq_puts() over seq_printf().
space to tab conversions.
Spelling error fix.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Checkpatch complains, and probably with good reason that we should use
const char const * for the static constant array that never gets
changed.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Right now, in consumer.h, there's some vararg hacks that pass 0 as the
flags. What actually is passed however is GPIOD_ASIS, which naturally is
also 0. Using the define/enum rather then the magic 0 makes it the
define more readable to a passer by.
Signed-off-by: Olliver Schinagl <oliver@schinagl.nl>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
ioport_map() may fail. Its safe to check the return value.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use resource managed APIs to simplify the code a bit.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Use resource_size to fix off-by-one resource size calculation
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
