The Android and Windows firmware does not accept the use of 3 as a mask
to cover the IPA streams. But with 0x721 being related to WiFi and 0x723
being unsed the mapping can be reduced to just cover 0x720 and 0x722,
which is accepted.
Acked-by: Alex Elder <elder@linaro.org>
Tested-by: Alex Elder <elder@linaro.org>
Fixes: e9e89c45bf ("arm64: dts: sdm845: add IPA iommus property")
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20201123052305.157686-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
When performing IPv6 forwarding, there is an expectation that SKBs
will have some headroom. When forwarding a packet from the aquantia
driver, this does not always happen, triggering a kernel warning.
aq_ring.c has this code (edited slightly for brevity):
if (buff->is_eop && buff->len <= AQ_CFG_RX_FRAME_MAX - AQ_SKB_ALIGN) {
skb = build_skb(aq_buf_vaddr(&buff->rxdata), AQ_CFG_RX_FRAME_MAX);
} else {
skb = napi_alloc_skb(napi, AQ_CFG_RX_HDR_SIZE);
There is a significant difference between the SKB produced by these
2 code paths. When napi_alloc_skb creates an SKB, there is a certain
amount of headroom reserved. However, this is not done in the
build_skb codepath.
As the hardware buffer that build_skb is built around does not
handle the presence of the SKB header, this code path is being
removed and the napi_alloc_skb path will always be used. This code
path does have to copy the packet header into the SKB, but it adds
the packet data as a frag.
Fixes: 018423e90b ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Lincoln Ramsay <lincoln.ramsay@opengear.com>
Link: https://lore.kernel.org/r/MWHPR1001MB23184F3EAFA413E0D1910EC9E8FC0@MWHPR1001MB2318.namprd10.prod.outlook.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Clang's integrated assembler produces the warning for assembly files:
warning: DWARF2 only supports one section per compilation unit
If -Wa,-gdwarf-* is unspecified, then debug info is not emitted for
assembly sources (it is still emitted for C sources). This will be
re-enabled for newer DWARF versions in a follow up patch.
Enables defconfig+CONFIG_DEBUG_INFO to build cleanly with
LLVM=1 LLVM_IAS=1 for x86_64 and arm64.
Cc: <stable@vger.kernel.org>
Link: https://github.com/ClangBuiltLinux/linux/issues/716
Reported-by: Dmitry Golovin <dima@golovin.in>
Reported-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Dmitry Golovin <dima@golovin.in>
Suggested-by: Nathan Chancellor <natechancellor@gmail.com>
Suggested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Follow-up to commit a73619a845 ("kbuild: use -fmacro-prefix-map to
make __FILE__ a relative path"). Assembler sources also use __FILE__
macro so this flag should be also applied to those sources.
Signed-off-by: Denys Zagorui <dzagorui@cisco.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This warning behaves differently depending on the architecture
and compiler. Using x86 gcc, we get no output at all because
gcc knows the architecture can handle unaligned accesses.
Using x86 clang, or gcc on an architecture that needs to
manually deal with unaligned accesses, the build log is
completely flooded with these warnings, as they are commonly
invoked by inline functions of networking headers, e.g.
include/linux/skbuff.h:1426:26: warning: cast increases required alignment of target type [-Wcast-align]
The compiler is correct to point this out, as we are dealing
with undefined behavior that does cause problems in practice,
but there is also no good way to rewrite the code in commonly
included headers to a safer method.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The Innolux N125HCE-GN1 display is used in the MNT Reform 2.0 laptop,
attached via eDP to a SN65DSI86 MIPI-DSI to eDP bridge. This patch
contains the DT binding for "innolux,n125hce-gn1".
Signed-off-by: Lukas F. Hartmann <lukas@mntre.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[reorder so comments comes before the compatible]
Link: https://patchwork.freedesktop.org/patch/msgid/20201124172604.981746-2-lukas@mntre.com
The driver can match only via the DT table so the main table should be
always used and the of_match_ptr does not have any sense (this also
allows ACPI matching via PRP0001, even though it is not relevant here).
The secondary match of_device_id tables (passed to of_match_node) should
be marked as maybe unused to fix compile testing (!CONFIG_OF on x86_64)
warnings:
drivers/dma/ti/dma-crossbar.c:125:34: warning:
‘ti_am335x_master_match’ defined but not used [-Wunused-const-variable=]
drivers/dma/ti/dma-crossbar.c:22:34: warning:
‘ti_dma_xbar_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-6-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver uses a second of_device_id table in the probe()
function by passing it to of_match_node(). This code will be a no-op
for compile testing (!CONFIG_OF on x86_64):
drivers/dma/stm32-dmamux.c:171:34: warning:
‘stm32_stm32dma_master_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-5-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here). This fixes
compile warning (!CONFIG_OF on x86_64):
drivers/dma/sf-pdma/sf-pdma.c:576:34: warning:
‘sf_pdma_dt_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-4-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here). This fixes
compile warning (!CONFIG_OF on x86_64):
drivers/dma/mv_xor.c:1281:34: warning:
‘mv_xor_dt_ids’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-3-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here). This fixes
compile warning (!CONFIG_OF on x86_64):
drivers/dma/dw-axi-dmac/dw-axi-dmac-platform.c:984:34: warning:
‘dw_dma_of_id_table’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-2-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The driver can match only via the DT table so the table should be always
used and the of_match_ptr does not have any sense (this also allows ACPI
matching via PRP0001, even though it is not relevant here). This fixes
compile warning (!CONFIG_OF on x86_64):
drivers/dma/dma-jz4780.c:1031:34: warning:
‘jz4780_dma_dt_match’ defined but not used [-Wunused-const-variable=]
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Link: https://lore.kernel.org/r/20201120162303.482126-1-krzk@kernel.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The HDCP feature requires at least one connector attached to the device;
however, some GPUs do not have a physical output, making the HDCP
initialization irrelevant. This patch disables HDCP initialization when
the graphic card does not have output.
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Since preempt-to-busy, we may unsubmit a request while it is still on
the HW and completes asynchronously. That means it may be retired and in
the process destroy the virtual engine (as the user has closed their
context), but that engine may still be holding onto the unsubmitted
compelted request. Therefore we need to potentially cleanup the old
request on destroying the virtual engine. We also have to keep the
virtual_engine alive until after the sibling's execlists_dequeue() have
finished peeking into the virtual engines, for which we serialise with
RCU.
v2: Be paranoid and flush the tasklet as well.
v3: And flush the tasklet before the engines, as the tasklet may
re-attach an rb_node after our removal from the siblings.
Fixes: 6d06779e86 ("drm/i915: Load balancing across a virtual engine")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-4-chris@chris-wilson.co.uk
(cherry picked from commit 46eecfccb4)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
We currently want to keep the interrupt enabled until the interrupt after
which we have no more work to do. This heuristic was broken by us
kicking the irq-work on adding a completed request without attaching a
signaler -- hence it appearing to the irq-worker that an interrupt had
fired when we were idle.
Fixes: 2854d86632 ("drm/i915/gt: Replace intel_engine_transfer_stale_breadcrumbs")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-3-chris@chris-wilson.co.uk
(cherry picked from commit 3aef910d26)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The UVD firmware is copied to cpu addr in uvd_resume, so it
should be used after that. This is to fix a bug introduced by
patch drm/amdgpu: fix SI UVD firmware validate resume fail.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
CC: stable@vger.kernel.org
The SI UVD firmware validate key is stored at the end of firmware,
which is changed during resume while playing video. So get the key
at sw_init and store it for fw validate using.
Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
fix the null pointer issue when runtime pm is triggered.
Signed-off-by: Kenneth Feng <kenneth.feng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
The mxs-dma driver is only used by DT platforms and the .id_table
is unused.
Get rid of it to simplify the code.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201123193051.17285-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Since 5.10-rc1 i.MX is a devicetree-only platform, so simplify the code
by removing the unused non-DT support.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20201124143405.2764-1-festevam@gmail.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Move the register slow register write and readback from out of the
critical path for execlists submission and delay it until the following
worker, shaving off around 200us. Note that the same signal_irq_work() is
allowed to run concurrently on each CPU (but it will only be queued once,
once running though it can be requeued and reexecuted) so we have to
remember to lock the global interactions as we cannot rely on the
signal_irq_work() itself providing the serialisation (in constrast to a
tasklet).
By pushing the arm/disarm into the central signaling worker we can close
the race for disarming the interrupt (and dropping its associated
GT wakeref) on parking the engine. If we loose the race, that GT wakeref
may be held indefinitely, preventing the machine from sleeping while
the GPU is ostensibly idle.
v2: Move the self-arming parking of the signal_irq_work to a flush of
the irq-work from intel_breadcrumbs_park().
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/2271
Fixes: e23005604b ("drm/i915/gt: Hold context/request reference while breadcrumbs are active")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201123113717.20500-1-chris@chris-wilson.co.uk
(cherry picked from commit 9d5612ca16)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
After having written the entire OA buffer with reports, the HW will
write again at the beginning of the OA buffer. It'll indicate it by
setting the WRAP bits in the OASTATUS register.
When a wrap happens and that at the end of the read vfunc we write the
OASTATUS register back to clear the REPORT_LOST bit, we sometimes see
that the OATAILPTR register is reset to a previous position on Gen8/9
(apparently not the case on Gen11+). This leads the next call to the
read vfunc to process reports we've already read. Because we've marked
those as read by clearing the reason & timestamp dwords, they're
discarded and a "Skipping spurious, invalid OA report" message is
emitted.
The workaround to avoid this OATAILPTR value reset seems to be to set
the wrap bits when writing back OASTATUS.
This change has no impact on userspace, it only avoids a bunch of
DRM_NOTE("Skipping spurious, invalid OA report\n") messages.
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Fixes: 19f81df285 ("drm/i915/perf: Add OA unit support for Gen 8+")
Reviewed-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201117130124.829979-1-lionel.g.landwerlin@intel.com
(cherry picked from commit 059a0beb48)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The struct name smu_state_memroy_block contains a spelling mistake, rename
it to smu_state_memory_block
Fixes: 8554e67d6e ("drm/amd/powerplay: implement power_dpm_state sys interface for SMU11")
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:720: warning: Function parameter or member 'vmhub' not described in 'gmc_v9_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'flush_type' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:836: warning: Function parameter or member 'all_hub' not described in 'gmc_v9_0_flush_gpu_tlb_pasid'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v9_0.c:382:23: warning: ‘ecc_umc_mcumc_status_addrs’ defined but not used [-Wunused-const-variable=]
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:618: warning: Function parameter or member 'all_hub' not described in 'gmc_v8_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'vmhub' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:657: warning: Function parameter or member 'flush_type' not described in 'gmc_v8_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v8_0.c:998: warning: Function parameter or member 'pasid' not described in 'gmc_v8_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:433: warning: Function parameter or member 'all_hub' not described in 'gmc_v7_0_flush_gpu_tlb_pasid'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'vmhub' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:471: warning: Function parameter or member 'flush_type' not described in 'gmc_v7_0_flush_gpu_tlb'
drivers/gpu/drm/amd/amdgpu/gmc_v7_0.c:771: warning: Function parameter or member 'pasid' not described in 'gmc_v7_0_vm_decode_fault'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:448: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:282: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi12_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi12_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/navi14_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:179:29: warning: ‘USB0_BASE’ defined but not used [-Wunused-const-variable=]
179 | static const struct IP_BASE USB0_BASE ={ { { { 0x0242A800, 0x05B00000, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:172:29: warning: ‘UMC_BASE’ defined but not used [-Wunused-const-variable=]
172 | static const struct IP_BASE UMC_BASE ={ { { { 0x00014000, 0x02425800, 0, 0, 0 } },
| ^~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/navi14_ip_offset.h:151:29: warning: ‘SDMA_BASE’ defined but not used [-Wunused-const-variable=]
151 | static const struct IP_BASE SDMA_BASE ={ { { { 0x00001260, 0x0000A000, 0x02402C00, 0, 0 } },
| ^~~~~~~~~
NB: Snipped a few of these
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:227:29: warning: ‘DBGU_IO_BASE’ defined but not used [-Wunused-const-variable=]
227 | static const struct IP_BASE DBGU_IO_BASE ={ { { { 0x000001E0, 0x000125A0, 0x0040B400, 0, 0, 0 } },
| ^~~~~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:127:29: warning: ‘PCIE0_BASE’ defined but not used [-Wunused-const-variable=]
127 | static const struct IP_BASE PCIE0_BASE ={ { { { 0x000128C0, 0x00411800, 0x04440000, 0, 0, 0 } },
| ^~~~~~~~~~
In file included from drivers/gpu/drm/amd/amdgpu/arct_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/arct_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x000120A0, 0x00017400, 0x00401400, 0, 0, 0 } },
| ^~~~~~~~~
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In file included from drivers/gpu/drm/amd/amdgpu/vega20_reg_init.c:27:
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:154:29: warning: ‘XDMA_BASE’ defined but not used [-Wunused-const-variable=
154 | static const struct IP_BASE XDMA_BASE ={ { { { 0x00003400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
drivers/gpu/drm/amd/amdgpu/../include/vega20_ip_offset.h:63:29: warning: ‘FUSE_BASE’ defined but not used [-Wunused-const-variable=]
63 | static const struct IP_BASE FUSE_BASE ={ { { { 0x00017400, 0, 0, 0, 0, 0 } },
| ^~~~~~~~~
Fixes the following W=1 kernel build warning(s):
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:192: warning: Function parameter or member 'async' not described in 'dce_v6_0_page_flip'
drivers/gpu/drm/amd/amdgpu/dce_v6_0.c:1050: warning: Cannot understand *
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'job' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:91: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'addr' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'seq' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Function parameter or member 'flags' not described in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:108: warning: Excess function parameter 'fence' description in 'uvd_v3_1_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:625: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Function parameter or member 'handle' not described in 'uvd_v3_1_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v3_1.c:692: warning: Excess function parameter 'adev' description in 'uvd_v3_1_hw_fini'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sonny Jiang <sonny.jiang@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v6_0.c:1903: warning: Function parameter or member 'timeout' not described in 'gfx_v6_0_ring_test_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'addr' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'seq' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Function parameter or member 'flags' not described in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:92: warning: Excess function parameter 'fence' description in 'si_dma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/si_dma.c:252: warning: Function parameter or member 'timeout' not described in 'si_dma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:408: warning: Function parameter or member 'ring' not described in 'si_dma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'vmid' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Function parameter or member 'pd_addr' not described in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:446: warning: Excess function parameter 'vm' description in 'si_dma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'ib' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Function parameter or member 'tmz' not described in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:781: warning: Excess function parameter 'ring' description in 'si_dma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Function parameter or member 'ib' not described in 'si_dma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/si_dma.c:804: warning: Excess function parameter 'ring' description in 'si_dma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1590: warning: Function parameter or member 'instance' not described in 'gfx_v7_0_select_se_sh'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'se_num' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1788: warning: Excess function parameter 'sh_per_se' description in 'gfx_v7_0_setup_rb'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:1852: warning: Excess function parameter 'adev' description in 'DEFAULT_SH_MEM_BASES'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2086: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_test_ring'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2130: warning: Excess function parameter 'ridx' description in 'gfx_v7_0_ring_emit_hdp_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2182: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'addr' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'seq' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2224: warning: Excess function parameter 'fence' description in 'gfx_v7_0_ring_emit_fence_compute'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'job' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2260: warning: Function parameter or member 'flags' not described in 'gfx_v7_0_ring_emit_ib_gfx'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:2351: warning: Function parameter or member 'timeout' not described in 'gfx_v7_0_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'ring' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'vmid' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Function parameter or member 'pd_addr' not described in 'gfx_v7_0_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/gfx_v7_0.c:3244: warning: Excess function parameter 'adev' description in 'gfx_v7_0_ring_emit_vm_flush'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'job' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:226: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'addr' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'seq' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Function parameter or member 'flags' not described in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:278: warning: Excess function parameter 'fence' description in 'cik_sdma_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:663: warning: Function parameter or member 'timeout' not described in 'cik_sdma_ring_test_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:808: warning: Function parameter or member 'ring' not described in 'cik_sdma_ring_pad_ib'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'vmid' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Function parameter or member 'pd_addr' not described in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:859: warning: Excess function parameter 'vm' description in 'cik_sdma_ring_emit_vm_flush'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Function parameter or member 'tmz' not described in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1315: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_copy_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Function parameter or member 'ib' not described in 'cik_sdma_emit_fill_buffer'
drivers/gpu/drm/amd/amdgpu/cik_sdma.c:1339: warning: Excess function parameter 'ring' description in 'cik_sdma_emit_fill_buffer'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Sumit Semwal <sumit.semwal@linaro.org>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-media@vger.kernel.org
Cc: linaro-mm-sig@lists.linaro.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/dce_v8_0.c:185: warning: Function parameter or member 'async' not described in 'dce_v8_0_page_flip'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Luben Tuikov <luben.tuikov@amd.com>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:157: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_init'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Function parameter or member 'handle' not described in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:212: warning: Excess function parameter 'adev' description in 'uvd_v4_2_hw_fini'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'addr' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'seq' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:446: warning: Excess function parameter 'fence' description in 'uvd_v4_2_ring_emit_fence'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'job' not described in 'uvd_v4_2_ring_emit_ib'
drivers/gpu/drm/amd/amdgpu/uvd_v4_2.c:513: warning: Function parameter or member 'flags' not described in 'uvd_v4_2_ring_emit_ib'
Acked-by: Christian König <christian.koenig@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: "Christian König" <christian.koenig@amd.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: amd-gfx@lists.freedesktop.org
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
