IPv6 packet may carry more than one extension header, and IPv6 nodes must
accept and attempt to process extension headers in any order and occurring
any number of times in the same packet. Hence, there should be no
assumption that Segment Routing extension header is to appear immediately
after the IPv6 header.
Moreover, section 4.1 of RFC 8200 gives a recommendation on the order of
appearance of those extension headers within an IPv6 packet. According to
this recommendation, Segment Routing extension header should appear after
Hop-by-Hop and Destination Options headers (if they present).
This patch fixes the get_srh(), so it gets the segment routing header
regardless of its position in the chain of the extension headers in IPv6
packet, and makes sure that the IPv6 routing extension header is of Type 4.
Signed-off-by: Ahmed Abdelsalam <amsalam20@gmail.com>
Acked-by: David Lebrun <david.lebrun@uclouvain.be>
Signed-off-by: David S. Miller <davem@davemloft.net>
Reported by Johannes Berg [1]. Problem here: function
process_proto_type() concatenates the striped lines of declaration
without any whitespace. A one-liner of::
struct something {
struct foo
bar;
};
has to be::
struct something {struct foo bar;};
Without the patching process_proto_type(), the result missed the space
between 'foo' and 'bar'::
struct something {struct foobar;};
Bugfix of process_proto_type() brings next error when blank lines
between enum declaration::
warning: Enum value ' ' not described in enum 'foo'
Problem here: dump_enum() does not strip leading whitespaces from
the concatenated string (with the new additional space from
process_proto_type).
[1] https://www.mail-archive.com/linux-doc@vger.kernel.org/msg12410.html
Signed-off-by: Markus Heiser <markus.heiser@darmarit.de>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Antoine Tenart says:
====================
net: mvpp2: comphy configuration
This series, following up the one one the GoP/MAC configuration, aims at
stopping to depend on the firmware/bootloader configuration when using
the PPv2 engine. With this series the PPv2 driver does not need to rely
on a previous configuration, and dynamic reconfiguration while the
kernel is running can be done (i.e. switch one port from SGMII to 10G,
or the opposite). A port can now be configured in a different mode than
what's done in the firmware/bootloader as well.
The series first contain patches in the generic PHY framework to support
what is called the comphy (common PHYs), which is an h/w block providing
PHYs that can be configured in various modes ranging from SGMII, 10G
to SATA and others. As of now only the SGMII and 10G modes are
supported by the comphy driver.
Then patches are modifying the PPv2 driver to first add the comphy
initialization sequence (i.e. calls to the generic PHY framework) and to
then take advantage of this to allow dynamic reconfiguration (i.e.
configuring the mode of a port given what's connected, between sgmii and
10G). Note the use of the comphy in the PPv2 driver is kept optional
(i.e. if not described in dt the driver still as before an relies on the
firmware/bootloader configuration).
Finally there are dt/defconfig patches to describe and take advantage of
this.
This was tested on a range of devices: 8040-db, 8040-mcbin and 7040-db.
@Dave: the dt patches should go through the mvebu tree (patches 9-13).
Thanks!
Antoine
Since v3:
- Now use of_phy_simple_xlate() to retrieve the phy.
- Added an owner in the phy_ops structure.
- Now allow the module to be selected with COMPILE_TEST.
- Removed unused parameter in the comphy set_mode functions.
- Added Kishon Acked-by in patch 1.
Since v2:
- Kept the link mode enforcement.
- Removed the netif_running() check.
- Reworded the "dynamic reconfiguration of the PHY mode" commit log.
- Added one patch not to force the GMAC autoneg parameters when using
the XLG MAC.
Since v1:
- Updated the mode settings variable name in the comphy driver to
have 'cp110' in it.
- Documented the PHY cell argument in the dt documentation.
- New patch adding comphy phandles for the 7040-db board.
- Checked if the carrier_on/off functions were needed. They are.
- s/PHY/generic PHY/ in commit log of patch 1.
- Rebased on the latest net-next/master.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds logic to reconfigure the comphy/GoP/MAC when the link
state is updated at runtime. This is very useful on boards where many
link speed are supported: depending on what is negotiated the PPv2
driver will automatically reconfigures the link between the PHY and the
MAC.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When using the XLG MAC, it does not make sense to force the GMAC autoneg
parameters. This patch adds checks to only set the GMAC autoneg
parameters when needed (i.e. when not using the XLG MAC).
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When the link status changes, the phylib calls the link_event function
in the mvpp2 driver. Before this patch only the egress/ingress transmit
was enabled/disabled. This patch adds more functionality to the link
status management code by enabling/disabling the port per-cpu
interrupts, and the port itself. The queues are now stopped as well, and
the netif carrier helpers are called.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The link_event function is somewhat complicated. This cosmetic patch
simplifies it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On some platforms, the comphy is between the MAC GoP and the PHYs. The
mvpp2 driver currently relies on the firmware/bootloader to configure
the comphy. As a comphy driver was added to the generic PHY framework,
this patch uses it in the mvpp2 driver to configure the comphy at boot
time to avoid relying on the bootloader.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Marvell Armada 7K/8K SoCs contains an hardware block called COMPHY
that provides a number of shared PHYs used by various interfaces in the
SoC: network, SATA, PCIe, etc. This Device Tree binding allows to
describe this COMPHY hardware block.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
On the CP110 unit, which can be found on various Marvell platforms such
as the 7k and 8k (currently), a comphy (common PHYs) hardware block can
be found. This block provides a number of PHYs which can be used in
various modes by other controllers (network, SATA ...). These common
PHYs must be configured for the controllers using them to work correctly
either at boot time, or when the system runs to switch the mode used.
This patch adds a driver for this comphy hardware block, providing
callbacks for the its PHYs so that consumers can configure the modes
used.
As of this commit, two modes are supported by the comphy driver: sgmii
and 10gkr.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds more generic PHY modes to the phy_mode enum, to
allow configuring generic PHYs to the SGMII and/or the 10GKR mode
by using the set_mode callback.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
-----BEGIN PGP SIGNATURE-----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=Ld3+
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.13-rc8' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"Two fixes (a vmwgfx and core drm fix) in the queue for 4.13 final,
hopefully that is it"
* tag 'drm-fixes-for-v4.13-rc8' of git://people.freedesktop.org/~airlied/linux:
drm/vmwgfx: Fix F26 Wayland screen update issue
drm/bridge/sii8620: Fix memory corruption
Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
to IPR to prevent an error on initialisation.
Signed-off-by: James E.J. Bottomley <jejb@linux.vnet.ibm.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQIcBAABAgAGBQJZpr2hAAoJEAVr7HOZEZN4AU0P/3BMq6arCr5u2ZrKuYRyExht
hglV2s8Qn8m231sdZCufU4lImjFY65ydqgq0WC7J6B+uFuNUqWrGJXB1fQyMHLdx
WDlCaJhchflvKWXMODMAbcmZHvUXHCU/k8rWG6VesgvGJPvql/Y/q7PWqSJ68Iaf
bjALfRy6xljm5nJCDHjsKqaaUOgHYSzgioDz7q1sNTF6aDM5wSJQyXqmEp6OfNXj
fdXnys35s7ZQ5ihqXYQVHl3DQxB2utVoGcwma6bHDqE6YxoF4+3R2MAes7uJRyMB
nsU7SFgdIuAo2bhoGxft6463bZFhbDpfEhKr+l8Y/DYK0khiEutlGwL9PJw55Mei
MN2BEM7m31wpWcECJLfo4C096qXpd1ruo5apv4cz/JAeBCk2mIwM1Ejzv6jpVw21
Cdm8CxRgsx6iyS5+IoZFVNFfNE47yDCsmnwqOxPkVeZJPK/5tJpVpBoDOQBe7w9s
4uc4rjmMyyvC4qgEVWzhgZ9Lf7zv9KSgxMSV29Kef6rqdFhxOxJlw6+HCxYbvqOf
5hxjepZH86lSknFSojLpoJ9pcqE56G4mWS8o9P/vbM/tnTy+w1NuPOs5hd7WsQcm
9gCc+HjbyfkYyvCGEC0i2uFgp5WaiAxyCt7WPHAvPUF6efR9TAayYlYVr+Ldl+rz
T1Oz7R/E2cnci6OA2eVs
=+Yu6
-----END PGP SIGNATURE-----
Merge tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"Three minor fixes: a NULL deref in qedf, an off by one in sg and a fix
to IPR to prevent an error on initialisation"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: qedf: Fix a potential NULL pointer dereference
scsi: sg: off by one in sg_ioctl()
scsi: ipr: Set no_report_opcodes for RAID arrays
Pull UML fix from Richard Weinberger:
"This contains a single fix for a regression which was introduced while
the merge window"
* 'for-linus-4.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rw/uml:
um: Fix check for _xstate for older hosts
Pull alpha update from Matt Turner:
"A few fixes and wires up some additional syscalls."
[ Some of this is technically not really rc7 material, but it's alpha,
and it all looks safe anyway. Matt explains: "My alpha has been
offline, hence the very late-in-cycle pull request" and hasn't caused
problems before, so he gets to slide. - Linus ]
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mattst88/alpha:
alpha: uapi: Add support for __SANE_USERSPACE_TYPES__
alpha: Define ioremap_wc
alpha: Fix section mismatches
alpha: support R_ALPHA_REFLONG relocations for module loading
alpha: Fix typo in ev6-copy_user.S
alpha: Package string routines together
alpha: Update for new syscalls
alpha: Fix build error without CONFIG_VGA_HOSE.
We should not hold a spinlock while pushing the skb into the networking
stack, so move the call to netif_rx_ni out of the critical region to where
we have dropped the spinlock.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VMD child devices must use the VMD endpoint's ID as the requester. Because
of this, there needs to be a way to link the parent VMD endpoint's IOMMU
group and associated mappings to the VMD child devices such that attaching
and detaching child devices modify the endpoint's mappings, while
preventing early detaching on a singular device removal or unbinding.
The reassignment of individual VMD child devices devices to VMs is outside
the scope of VMD, but may be implemented in the future. For now it is best
to prevent any such attempts.
Prevent VMD child devices from returning an IOMMU, which prevents it from
exposing an iommu_group sysfs directory and allowing subsequent binding by
userspace-access drivers such as VFIO.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Use the is_vmd() predicate to identify devices below a VMD host rather than
relying on the domain number.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
VMD currently only exists for Intel x86 products, so move the VMD quirk to
arch/x86.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Add Jonathan Derrick as VMD maintainer.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Keith Busch <keith.busch@intel.com>
Chris Mi says:
====================
net/sched: Improve getting objects by indexes
Using current TC code, it is very slow to insert a lot of rules.
In order to improve the rules update rate in TC,
we introduced the following two changes:
1) changed cls_flower to use IDR to manage the filters.
2) changed all act_xxx modules to use IDR instead of
a small hash table
But IDR has a limitation that it uses int. TC handle uses u32.
To make sure there is no regression, we add several new IDR APIs
to support unsigned long.
v2
==
Addressed Hannes's comment:
express idr_alloc in terms of idr_alloc_ext and most of the other functions
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Typically, each TC filter has its own action. All the actions of the
same type are saved in its hash table. But the hash buckets are too
small that it degrades to a list. And the performance is greatly
affected. For example, it takes about 0m11.914s to insert 64K rules.
If we convert the hash table to IDR, it only takes about 0m1.500s.
The improvement is huge.
But please note that the test result is based on previous patch that
cls_flower uses IDR.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, all filters with the same priority are linked in a doubly
linked list. Every filter should have a unique handle. To make the
handle unique, we need to iterate the list every time to see if the
handle exists or not when inserting a new filter. It is time-consuming.
For example, it takes about 5m3.169s to insert 64K rules.
This patch changes cls_flower to use IDR. With this patch, it
takes about 0m1.127s to insert 64K rules. The improvement is huge.
But please note that in this testing, all filters share the same action.
If every filter has a unique action, that is another bottleneck.
Follow-up patch in this patchset addresses that.
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The following new APIs are added:
int idr_alloc_ext(struct idr *idr, void *ptr, unsigned long *index,
unsigned long start, unsigned long end, gfp_t gfp);
void *idr_remove_ext(struct idr *idr, unsigned long id);
void *idr_find_ext(const struct idr *idr, unsigned long id);
void *idr_replace_ext(struct idr *idr, void *ptr, unsigned long id);
void *idr_get_next_ext(struct idr *idr, unsigned long *nextid);
Signed-off-by: Chris Mi <chrism@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Sphinx will now generate the table of contents automatically, which
avoids having the ToC getting out of sync with the rest of the document.
Signed-off-by: Josh Holland <anowlcalledjosh@gmail.com>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
Drop all references to git daily snapshots of Linux mainline git tree
since they are no longer generated.
Drop the "Last update" info since 'git log' is a better source of that
info and since the Last update date is not being updated.
Yes, I read that this file is obsolete, but it still has some useful
information in it.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jonathan Corbet <corbet@lwn.net>
VMD hardware has to share its vectors among child devices in its PCI
domain so we should allocate as many as possible rather than just ones
that can be affinitized.
pci_alloc_irq_vectors_affinity() limits the number of affinitized IRQs to
the number of present CPUs (see irq_calc_affinity_vectors()). But we'd
prefer to have more vectors, even if they aren't distributed across the
CPUs, so use pci_alloc_irq_vectors() instead.
Reported-by: Brad Goodman <Bradley.Goodman@dell.com>
Signed-off-by: Keith Busch <keith.busch@intel.com>
[bhelgaas: add irq_calc_affinity_vectors() reference to changelog]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
In current ALSA SoC, Codec only has set_jack feature.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ALSA SoC, Codec only has set_pll feature.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
In current ALSA SoC, Codec only has set_sysclk feature.
Codec will be merged into Component in next generation ALSA SoC,
thus current Codec specific feature need to be merged into it.
This is glue patch for it.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
amba_id are not supposed to change at runtime. All functions
working with const amba_id. So mark the non-const structs as const.
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
When the user unbinds the last device of a group from a vfio bus
driver, the devices within that group should be available for other
purposes. We currently have a race that makes this generally, but
not always true. The device can be unbound from the vfio bus driver,
but remaining IOMMU context of the group attached to the container
can result in errors as the next driver configures DMA for the device.
Wait for the group to be detached from the IOMMU backend before
allowing the bus driver remove callback to complete.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
In vfio_iommu_group_get() we want to increase the reference
count of the iommu group.
In noiommu case, the group does not exist and is allocated.
iommu_group_add_device() increases the group ref count. However we
then call iommu_group_put() which decrements it.
This leads to a "refcount_t: underflow WARN_ON".
Only decrement the ref count in case of iommu_group_add_device
failure.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Recent patch had an endian warning ie
cifs: return ENAMETOOLONG for overlong names in cifs_open()/cifs_lookup()
Signed-off-by: Steve French <smfrench@gmail.com>
CC: Ronnie Sahlberg <lsahlber@redhat.com>
CC: Stable <stable@vger.kernel.org>
Acked-by: Pavel Shilovsky <pshilov@microsoft.com>
Currently the maximum size of SMB2/3 header is set incorrectly which
leads to hanging of directory listing operations on encrypted SMB3
connections. Fix this by setting the maximum size to 170 bytes that
is calculated as RFC1002 length field size (4) + transform header
size (52) + SMB2 header size (64) + create response size (56).
Cc: <stable@vger.kernel.org>
Signed-off-by: Pavel Shilovsky <pshilov@microsoft.com>
Signed-off-by: Steve French <smfrench@gmail.com>
Acked-by: Sachin Prabhu <sprabhu@redhat.com>
This should also allow probing to fail when a pca955x chip is not
found on a I2C bus.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Jacek Anaszewski <jacek.anaszewski@gmail.com>
Add internal PCI bridge support for r8a7743/5 SoC. The Renesas RZ/G1[ME]
(R8A7743/5) internal PCI bridge is identical to the R-Car Gen2 family.
This doesn't change the driver, so it does nothing by itself. But it does
mean that checkpatch won't complain about a future patch that adds
"renesas,pci-r8a7743" to a DT, which helps ensure that shipped DTs use
documented compatibility strings.
Signed-off-by: Biju Das <biju.das@bp.renesas.com>
[bhelgaas: add explanatory note]
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Simon Horman <horms+renesas@verge.net.au>
By using drm_gem_flink/drm_gem_open on an object using the same fd, it
is possible for a client to create multiple handles pointing to the same
object (tied to the same contexts and VMA), as exemplified by
igt::gem_handle_to_libdrm_bo(). Since this duplication has been possible
since forever, we cannot assume that the handle:(fpriv, object) is
unique and so must handle the multiple users of a single VMA.
v2: Added commentary noise.
Testcase: igt/gem_close
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102355
Fixes: d1b48c1e71 ("drm/i915: Replace execbuf vma ht with an idr")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170822110517.22277-3-chris@chris-wilson.co.uk
Tested-by: Marta Lofstedt <marta.lofstedt@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
(cherry-picked from commit 3ffff01749)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The CCS won't have the same stride as the main surface anyway so trying
to guard against the fence stride not matching the CCS stride is
not sensible. Just skip the fence vs. fb alignment check for the aux
plane.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 2ec4cf4057)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace wants to treat fb->offsets[] as raw byte offsets into the gem
bo. Adjust the kernel code to match.
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Daniel Stone <daniels@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170824191100.10949-2-ville.syrjala@linux.intel.com
Acked-by: Ben Widawsky <ben@bwidawsk.net>
Fixes: 2e2adb0573 ("drm/i915: Add render decompression support")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
(cherry picked from commit 303ba69554)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we hold the device wakeref when writing through the GTT (otherwise
the writes would fail), we presumed that before the device sleeps those
writes would naturally be flushed and that we wouldn't need our mmio
read trick. However, that presumption seems false and a sleepy bxt seems
to require us to always manually flush the GTT writes prior to direct
access.
Fixes: e2a2aa36a5 ("drm/i915: Check we have an wake device before flushing GTT writes")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170829192546.1087-1-chris@chris-wilson.co.uk
(cherry picked from commit b69a784f5e)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Sometimes we know we are the only user of the bo, but since we take a
protective pin_pages early on, an attempt to change the vmap on the
object is denied because it is busy. i915_gem_object_pin_map() cannot
tell from our single pin_count if the operation is safe. Instead we must
pass that information down from the caller in the manner of
I915_MAP_OVERRIDE.
This issue has existed from the introduction of the mapping, but was
never noticed as the only place where this conflict might happen is for
cached kernel buffers (such as allocated by i915_gem_batch_pool_get()).
Until recently there was only a single user (the cmdparser) so no
conflicts ever occurred. However, we now use it to allocate batches for
different operations (using MAP_WC on !llc for writes) in addition to the
existing shadow batch (using MAP_WB for reads).
We could either keep both mappings cached, or use a different write
mechanism if we detect a MAP_WB already exists (i.e. clflush
afterwards), but as we haven't seen this issue in the wild (it requires
hitting the GPU reloc path in addition to the cmdparser) for simplicity
just allow the mappings to be recreated.
v2: Include the i915_MAP_OVERRIDE bit in the enum so the compiler knows
about all the valid values.
Fixes: 7dd4f6729f ("drm/i915: Async GPU relocation processing")
Testcase: igt/gem_lut_handle # byt, completely by accident
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170828104631.8606-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
(cherry picked from commit a575c67617)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Since we use a worker to enable FBC on the CRTC, it is possible for the
CRTC to be switched off before we run. In this case, the CRTC will not
allow us to wait upon a vblank, so remove the DRM_ERROR as this is very
much expected.
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102410
Fixes: ca18d51d77 ("drm/i915/fbc: wait for a vblank instead of 50ms when enabling")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170825150215.19236-1-chris@chris-wilson.co.uk
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
(cherry picked from commit 908b6e6e8a)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
The legacy ioctl interfaces are only useful for BR/EDR operation and
since Linux 3.4 no longer needed anyway. This options allows disabling
them alltogether and use only management interfaces for setup and
control.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Some ioctl functions are implemented individually for both playback
and capture streams although most of the codes are identical with just
a few different stream-specific function calls. This patch unifies
these places, removes the superfluous trivial check and flattens the
call paths as a cleanup. Meanwhile, for better readability, some
codes (e.g. xfer ioctls or forward/rewind ioctls) are factored out as
functions.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
