This function is not used anywhere in the kernel.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Both functions are entirely unused.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Support for the new H5 SoC and the PRCM block found in a number of SoCs as
well, plus the usual chunk of fixes and minor enhancements.
-----BEGIN PGP SIGNATURE-----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=V49g
-----END PGP SIGNATURE-----
Merge tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into clk-next
Pull Allwinner clock patches for 4.12 from Maxime Ripard:
Support for the new H5 SoC and the PRCM block found in a number of SoCs as
well, plus the usual chunk of fixes and minor enhancements.
* tag 'sunxi-clk-for-4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: Display index when clock registration fails
clk: sunxi-ng: a33: Add offset and minimum value for DDR1 PLL N factor
clk: sunxi-ng: a80: Remodel CPU cluster PLLs as N-type multiplier clocks
clk: sunxi-ng: mult: Support PLL lock detection
clk: sunxi-ng: add support for PRCM CCUs
dt-bindings: update device tree binding for Allwinner PRCM CCUs
clk: sunxi-ng: sun5i: Fix mux width for csi clock
clk: sunxi-ng: tighten SoC deps on explicit AllWinner SoCs
clk: sunxi-ng: add Allwinner H5 CCU support for H3 CCU driver
clk: sunxi-ng: gate: Support common pre-dividers
On platforms booting with ACPI, architected memory-mapped timers'
configuration data is provided by firmware through the ACPI GTDT
static table.
The clocksource architected timer kernel driver requires a firmware
interface to collect timer configuration and configure its driver.
this infrastructure is present for device tree systems, but it is
missing on systems booting with ACPI.
Implement the kernel infrastructure required to parse the static
ACPI GTDT table so that the architected timer clocksource driver can
make use of it on systems booting with ACPI, therefore enabling
the corresponding timers configuration.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
[Mark: restructure error handling]
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Only "cache" needs to use ulong (its used with set_bit()), missed can use
u16. Also add build-time assertion to ensure event bits fit.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If insertion of a new conntrack fails because the table is full, the kernel
searches the next buckets of the hash slot where the new connection
was supposed to be inserted at for an entry that hasn't seen traffic
in reply direction (non-assured), if it finds one, that entry is
is dropped and the new connection entry is allocated.
Allow the conntrack gc worker to also remove *assured* conntracks if
resources are low.
Do this by querying the l4 tracker, e.g. tcp connections are now dropped
if they are no longer established (e.g. in finwait).
This could be refined further, e.g. by adding 'soft' established timeout
(i.e., a timeout that is only used once we get close to resource
exhaustion).
Cc: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
commit 223b02d923
("netfilter: nf_conntrack: reserve two bytes for nf_ct_ext->len")
had to increase size of the extension offsets because total size of the
extensions had increased to a point where u8 did overflow.
3 years later we've managed to diet extensions a bit and we no longer
need u16. Furthermore we can now add a compile-time assertion for this
problem.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
get rid of the (now unused) nf_ct_ext_add_length define and also
rename the function to plain nf_ct_ext_add().
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
No need to track this for inkernel helpers anymore as
NF_CT_HELPER_BUILD_BUG_ON checks do this now.
All inkernel helpers know what kind of structure they
stored in helper->data.
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
add a 32 byte scratch area in the helper struct instead of relying
on variable sized helpers plus compile-time asserts to let us know
if 32 bytes aren't enough anymore.
Not having variable sized helpers will later allow to add BUILD_BUG_ON
for the total size of conntrack extensions -- the helper extension is
the only one that doesn't have a fixed size.
The (useless!) NF_CT_HELPER_BUILD_BUG_ON(0); are added so that in case
someone adds a new helper and copy-pastes from one that doesn't store
private data at least some indication that this macro should be used
somehow is there...
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
By default the kernel emits all ctnetlink events for a connection.
This allows to select the types of events to generate.
This can be used to e.g. only send DESTROY events but no NEW/UPDATE ones
and will work even if sysctl net.netfilter.nf_conntrack_events is set to 0.
This was already possible via iptables' CT target, but the nft version has
the advantage that it can also be used with already-established conntracks.
The added nf_ct_is_template() check isn't a bug fix as we only support
mark and labels (and unlike ecache the conntrack core doesn't copy those).
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch adds support for parsing arch timer info in GTDT,
provides some kernel APIs to parse all the PPIs and
always-on info in GTDT and export them.
By this driver, we can simplify arm_arch_timer drivers, and
separate the ACPI GTDT knowledge from it.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Hanjun Guo <hanjun.guo@linaro.org>
Acked-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
In preparation for ACPI GTDT support, this patch adds structs to
describe the MMIO timers indepedent of the firmware interface.
Subsequent patches will use these to split the FW/HW probing logic, so
that the HW probing logic can be shared by ACPI and DT.
Signed-off-by: Fu Wei <fu.wei@linaro.org>
Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org>
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Add complete support for full hierarchical scheduling, with a cgroups
interface. Full hierarchical scheduling is implemented through the
'entity' abstraction: both bfq_queues, i.e., the internal BFQ queues
associated with processes, and groups are represented in general by
entities. Given the bfq_queues associated with the processes belonging
to a given group, the entities representing these queues are sons of
the entity representing the group. At higher levels, if a group, say
G, contains other groups, then the entity representing G is the parent
entity of the entities representing the groups in G.
Hierarchical scheduling is performed as follows: if the timestamps of
a leaf entity (i.e., of a bfq_queue) change, and such a change lets
the entity become the next-to-serve entity for its parent entity, then
the timestamps of the parent entity are recomputed as a function of
the budget of its new next-to-serve leaf entity. If the parent entity
belongs, in its turn, to a group, and its new timestamps let it become
the next-to-serve for its parent entity, then the timestamps of the
latter parent entity are recomputed as well, and so on. When a new
bfq_queue must be set in service, the reverse path is followed: the
next-to-serve highest-level entity is chosen, then its next-to-serve
child entity, and so on, until the next-to-serve leaf entity is
reached, and the bfq_queue that this entity represents is set in
service.
Writeback is accounted for on a per-group basis, i.e., for each group,
the async I/O requests of the processes of the group are enqueued in a
distinct bfq_queue, and the entity associated with this queue is a
child of the entity associated with the group.
Weights can be assigned explicitly to groups and processes through the
cgroups interface, differently from what happens, for single
processes, if the cgroups interface is not used (as explained in the
description of the previous patch). In particular, since each node has
a full scheduler, each group can be assigned its own weight.
Signed-off-by: Fabio Checconi <fchecconi@gmail.com>
Signed-off-by: Paolo Valente <paolo.valente@linaro.org>
Signed-off-by: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
* Add support for R-Car H3 ES2.0
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=m+ef
-----END PGP SIGNATURE-----
Merge tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/drivers
Renesas ARM Based SoC Sysc Updates for v4.12
* Add support for R-Car H3 ES2.0
* tag 'renesas-sysc-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
soc: renesas: rcar-sysc: Add support for R-Car H3 ES2.0
soc: renesas: rcar-sysc: Add support for fixing up power area tables
soc: renesas: Register SoC device early
base: soc: Allow early registration of a single SoC device
base: soc: Let soc_device_match() return no match when called too early
Signed-off-by: Olof Johansson <olof@lixom.net>
Corrections:
* Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
* Correct Z clock for r8a7792 SoC
* Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
* Correct ethernet clock parent on r7s72100 SoC
* Correct DU clock for r8a7794/silk board
Cleanups:
* Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs
Enhancements:
* Enable rtc r7s72100/genmai board
* Add Z2 clock for r8a7794 SoC
* Add DU clock for r8a7794 SoC
* Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
* Add reset control properties for r8a774[35] SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=N8Dk
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/dt
Second Round of Renesas ARM Based SoC DT Updates for v4.12
Corrections:
* Correct clock frequency of X2 DU clock input for r8a7791/koelsch board
* Correct Z clock for r8a7792 SoC
* Correct parent of SSI[0-9] clocks for r8a779[013] SoCs
* Correct ethernet clock parent on r7s72100 SoC
* Correct DU clock for r8a7794/silk board
Cleanups:
* Drop _clk suffix from external CAN clock node name on r8a779[01] SoCs
Enhancements:
* Enable rtc r7s72100/genmai board
* Add Z2 clock for r8a7794 SoC
* Add DU clock for r8a7794 SoC
* Add power-domains to SDHI for r8a7794 and r7s72100 SoCs
* Add reset control properties for r8a774[35] SoCs
* tag 'renesas-dt2-for-v4.12' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (22 commits)
ARM: dts: r8a7791: Drop _clk suffix from external CAN clock node name
ARM: dts: r8a7790: Drop _clk suffix from external CAN clock node name
ARM: dts: genmai: Enable rtc and rtc_x1 clock
ARM: dts: rskrza1: add rtc DT support
ARM: dts: rskrza1: set rtc_x1 clock value
ARM: dts: r7s72100: add rtc to device tree
ARM: dts: r7s72100: add RTC_X clock inputs to device tree
ARM: dts: r7s72100: add rtc clock to device tree
ARM: dts: koelsch: Correct clock frequency of X2 DU clock input
ARM: dts: r8a7794: Add Z2 clock
ARM: dts: r8a7792: Correct Z clock
ARM: dts: r8a7793: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7791: Correct parent of SSI[0-9] clocks
ARM: dts: r8a7790: Correct parent of SSI[0-9] clocks
ARM: dts: r7s72100: fix ethernet clock parent
ARM: dts: silk: Correct clock of DU1
ARM: dts: alt: Correct clock of DU1
ARM: dts: r8a7794: Correct clock of DU1
ARM: dts: r8a7794: Add DU1 clock to device tree
ARM: dts: r7s72100: add power-domains to sdhi
...
Signed-off-by: Olof Johansson <olof@lixom.net>
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJY6zd4AAoJEFBXWFqHsHzODtoH/jwTFRhAhfKG2wfplkP+U4HT
gijXHDybebRGll2voGAL7YX7GPhLcy0NSGdiK/ckTtHlvR4E2uxcwaIwzXIE1CTb
MXfv7p+3FXhjcqgbvl122hnLAMWOYjcbH3tFzBy1jlpGp9oEmHx4OtpdlgyD5GJ7
+En6aDtbU0g8aJg9ldZfO8iSAJz1CAqpap+FRjpcPX4xXflOQwQfxJNWuDeg75k6
U3zB2r+lbmjIfohUHWAnHsU2Jf4WPrBrjVsj/1YsiE5rMNPfxAEPYSQJAumG7JtO
qTPWf3qJnSyrWBscPRR3Fs//11IgXZXSCWBPBZjng0ELFS3Rkdvp87etjZraSjU=
=Sypm
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/drivers
i.MX drivers updates for 4.12:
- A series from Lucas Stach which partly rewrites the imx gpc driver
to support multiple power domains, and moves the related code from
imx platform into drivers folder.
- A series from Dong Aisheng which fixes the issues with Lucas' code
changes and improves things.
- Add workaround for i.MX6QP hardware erratum ERR009619 that is PRE
clocks may be stalled during the power up sequencing of the PU power
domain.
- Add imx-gpcv2 driver to support power domains managed by GPCv2 IP
block found on i.MX7 series of SoCs.
* tag 'imx-drivers-4.12' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: gpc: add workaround for i.MX6QP to the GPC PD driver
dt-bindings: imx-gpc: add i.MX6 QuadPlus compatible
soc: imx: gpc: add defines for domain index
soc: imx: Add GPCv2 power gating driver
dt-bindings: Add GPCv2 power gating driver
soc: imx: gpc: remove unnecessary readable_reg callback
dt-bindings: imx-gpc: correct the DOMAIN_INDEX using
soc: imx: gpc: keep PGC_X_CTRL name align with reference manual
soc: imx: gpc: fix comment when power up domain
soc: imx: gpc: fix imx6sl gpc power domain regression
soc: imx: gpc: fix domain_index sanity check issue
soc: imx: gpc: fix the wrong using of regmap cache
soc: imx: gpc: fix gpc clk get error handling
soc: imx: move PGC handling to a new GPC driver
dt-bindings: add multidomain support to i.MX GPC DT binding
Signed-off-by: Olof Johansson <olof@lixom.net>
- Reset the hi6220 mmc hosts to avoid hang
- Add the binding for the hi3798cv200 SoC and the poplar board
- Add basic dts files to support the hi3798cv200 poplar board
- Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board
- Add driver strength MACRO for the hi3660 SoC
- Add the pinctrl dtsi file for hikey960 board to configure the pins
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=5zO6
-----END PGP SIGNATURE-----
Merge tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi into next/dt64
ARM64: DT: Hisilicon SoC DT updates for 4.12
- Reset the hi6220 mmc hosts to avoid hang
- Add the binding for the hi3798cv200 SoC and the poplar board
- Add basic dts files to support the hi3798cv200 poplar board
- Enable the Mbigen, XGE, RoCE and SAS for the hip07 d05 board
- Add driver strength MACRO for the hi3660 SoC
- Add the pinctrl dtsi file for hikey960 board to configure the pins
* tag 'hisi-arm64-dt-for-4.12' of git://github.com/hisilicon/linux-hisi:
arm64: dts: hisi: add pinctrl dtsi file for HiKey960 development board
arm64: dts: hisi: add drive strength levels of the pins for Hi3660 SoC
arm64: dts: hisi: enable the NIC and SAS for the hip07-d05 board
arm64: dts: hisi: add SAS nodes for the hip07 SoC
arm64: dts: hisi: add RoCE nodes for the hip07 SoC
arm64: dts: hisi: add network related nodes for the hip07 SoC
arm64: dts: hisi: add mbigen nodes for the hip07 SoC
arm64: dts: hisilicon: add dts files for hi3798cv200-poplar board
dt-bindings: arm: hisilicon: add bindings for hi3798cv200 SoC and Poplar board
arm64: dts: hi6220: Reset the mmc hosts
Signed-off-by: Olof Johansson <olof@lixom.net>
This contains PMC support for Tegra186 as well as a proper driver for
the flow controller found on SoCs up to Tegra210. This also turns the
fuse driver into an explicitly non-modular driver.
-----BEGIN PGP SIGNATURE-----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=n4aM
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/drivers
soc/tegra: Core SoC changes for v4.12-rc1
This contains PMC support for Tegra186 as well as a proper driver for
the flow controller found on SoCs up to Tegra210. This also turns the
fuse driver into an explicitly non-modular driver.
* tag 'tegra-for-4.12-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
soc/tegra: Add initial flowctrl support for Tegra132/210
soc/tegra: flowctrl: Add basic platform driver
soc/tegra: Move Tegra flowctrl driver
ARM: tegra: Remove unnecessary inclusion of flowctrl header
soc: tegra: make fuse-tegra explicitly non-modular
soc/tegra: Fix link errors with PMC disabled
soc/tegra: Implement Tegra186 PMC support
Signed-off-by: Olof Johansson <olof@lixom.net>
Dave Gerlach (5):
PM / Domains: Add generic data pointer to genpd data struct
PM / Domains: Do not check if simple providers have phandle cells
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ayBe
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-pmdomain' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/drivers
ARM SOC PM domain support for 4.12
Dave Gerlach (5):
PM / Domains: Add generic data pointer to genpd data struct
PM / Domains: Do not check if simple providers have phandle cells
dt-bindings: Add TI SCI PM Domains
soc: ti: Add ti_sci_pm_domains driver
ARM: keystone: Drop PM domain support for k2g
* tag 'arm-soc-pmdomain' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: keystone: Drop PM domain support for k2g
soc: ti: Add ti_sci_pm_domains driver
dt-bindings: Add TI SCI PM Domains
PM / Domains: Do not check if simple providers have phandle cells
PM / Domains: Add generic data pointer to genpd data struct
Signed-off-by: Olof Johansson <olof@lixom.net>
Highlights:
----------
- ADD RTC support on STM32F746 MCU
- Enable RTC on STM32F746 Eval board
- Enable clocks on STM32F746 MCU
- Enable DMA, pwm1 and pwm3 on STM32F429I Eval
- Add support of STM32H743 MCU and his Eval board
- Enable USB HS and FS on STM32F469 Disco board
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQIcBAABAgAGBQJY4n6WAAoJEH+ayWryHnCFaXYQAKmOBcBrU2RiZt/tn02lhEJI
/BKTjFUBg9CCSMqT8xJvDtCJ3YLUwxqo4HhkvKnTZh7AQ1mSTdVScKrB0Le83271
IOoAFBmCZCn9ShSgclBPiold1q5i7g/hZRagQwNwXHdQXt8GZxhpVzaYgZj7EtQ4
B5ikmQCT9KagPSiY4M6X1pzRPRmqcN6alAYsIO8SoHrFpBXm8/TWqspn5pPhojIM
4oWbGEwAxLR4J86TA2Eu+Yp/8FvGX8+W59tFbarlBPloKueHADZ72MfrTZ72vXf6
y4s4JGctDOiLqRFBR6Pp3i8/F4d2pxtd7GsWHR12Mw8lQGHHkKZWs20vri+s6HiT
qkjKWXdV4mwYis4vUB997NOYClbqTbURcUt7uRvFrDXD2gg3TnRGkP5WynEX8njS
cnRhJ+1rS3iC2rvNtRGE9aadRRtxXVqVQ1HA2EeBeNGpVgFFPbdhPpt2ZDhC2PLf
FRYQnxxVAngionqxNGytwKTHXSsVYufMINPyUZWxqUXN083+HAWemJCUTd6cC1ia
I781iAjQDWyQzrG8jQtsEXPT2rSdrouVzu0CG642EDuU81CkAWz8vBkrjPj9m+9g
fcd8RhRQTvcz0rePNBq/OLRojA7bVsDBBikAJJh6tCnwil8oJlaJ5DSbORe8J8Ez
DlOoNIKk1byGfN6LrxKz
=l7eq
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into next/dt
STM32 DT updates for v4.12, round 1
Highlights:
----------
- ADD RTC support on STM32F746 MCU
- Enable RTC on STM32F746 Eval board
- Enable clocks on STM32F746 MCU
- Enable DMA, pwm1 and pwm3 on STM32F429I Eval
- Add support of STM32H743 MCU and his Eval board
- Enable USB HS and FS on STM32F469 Disco board
* tag 'stm32-dt-for-v4.12-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
dt-bindings: Document the STM32 USB OTG DWC2 core binding
ARM: dts: stm32: Enable USB HS in FS mode (embedded phy) on stm32f429-disco
ARM: dts: stm32: Enable USB FS on stm32f469-disco
ARM: dts: stm32: Add USB FS support for STM32F429 MCU
ARM: dts: stm32: Add STM32H743 MCU and STM32H743i-EVAL board
ARM: dts: stm32: Enable pwm1 and pwm3 on stm32f429i-eval
ARM: dts: stm32: Enable dma by default on stm32f4 adc
ARM: dts: stm32: enable RTC on stm32746g-eval
ARM: dts: stm32: Add RTC support for STM32F746 MCU
ARM: dts: stm32: set HSE_RTC clock frequency to 1 MHz on stm32f746
dt-bindings: mfd: Add STM32F7 RCC numeric constants into DT include file
ARM: dts: stm32: Enable clocks for STM32F746 MCU
Signed-off-by: Olof Johansson <olof@lixom.net>
perf_mem_data_src is a union that is initialized in the kernel via the ->val
field and accessed by userspace via the mem_xxx bitfields. For this to work
correctly on big endian platforms, we need a big-endian definition for the
bitfields.
Currently on a big endian system, if a user requests PERF_SAMPLE_DATA_SRC (perf
report -d), they will get the default value from perf_sample_data_init(), which
is PERF_MEM_NA. The value for PERF_MEM_NA is constructed using shifts:
/* TLB access */
#define PERF_MEM_TLB_NA 0x01 /* not available */
...
#define PERF_MEM_TLB_SHIFT 26
#define PERF_MEM_S(a, s) \
(((__u64)PERF_MEM_##a##_##s) << PERF_MEM_##a##_SHIFT)
#define PERF_MEM_NA (PERF_MEM_S(OP, NA) |\
PERF_MEM_S(LVL, NA) |\
PERF_MEM_S(SNOOP, NA) |\
PERF_MEM_S(LOCK, NA) |\
PERF_MEM_S(TLB, NA))
Which works out as:
((0x01 << 0) | (0x01 << 5) | (0x01 << 19) | (0x01 << 24) | (0x01 << 26))
Which means the PERF_MEM_NA value comes out of the kernel as 0x5080021
in CPU endian.
But then in the perf tool, the code uses the bitfields to inspect the value, and
currently the bitfields are defined using little endian ordering.
So eg. in perf_mem__tlb_scnprintf() we see:
data_src->val = 0x5080021
op = 0x0
lvl = 0x0
snoop = 0x0
lock = 0x0
dtlb = 0x0
rsvd = 0x5080021
Because of the way the perf tool code is written this is still displayed to the
user as "N/A", so there is no bug visible at the UI level.
Currently there are no big endian architectures which export a meaningful
value (ie. other than PERF_MEM_NA), so the extent of the bug on big endian
platforms is that the PERF_MEM_NA value is exported incorrectly as described
above. Subsequent patches will add support on big endian powerpc for populating
the data source value.
This patch does a minimal fix of adding big endian definition of the bitfields
to match the values that are already exported by the kernel on big endian. And
it makes no change on little endian.
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Drop the separate cec-edid.h header and merge it into cec.h.
There was really no need to have a separate header for this.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
The Kconfig options for the CEC subsystem were a bit messy. In
addition there were two cec sources (cec-edid.c and cec-notifier.c)
that were outside of the media/cec directory, which was weird.
Move those sources to media/cec as well.
The cec-edid and cec-notifier functionality is now part of the cec
module and these are no longer separate modules.
Also remove the MEDIA_CEC_EDID config option and include it with the
main CEC config option (which defined CEC_EDID anyway).
Added static inlines to cec-edid.h for dummy functions when CEC_CORE
isn't defined.
CEC drivers should now depend on CEC_CORE.
CEC drivers that need the cec-notifier functionality must explicitly
select CEC_NOTIFIER.
The s5p-cec and stih-cec drivers depended on VIDEO_DEV instead of
CEC_CORE, fix that as well.
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Acked-by: Benjamin Gaignard <benjamin.gaignard@linaro.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJY881cAAoJEHm+PkMAQRiGG4UH+wa2z6Qet36Uc4nXFZuSMYrO
ErUWs1QpTDDv4a+LE4fgyMvM3j9XqtpfQLy1n70jfD14IqPBhHe4gytasAf+8lg1
YvddFx0Yl3sygVu3dDBNigWeVDbfwepW59coN0vI5nrMo+wrei8aVIWcFKOxdMuO
n72u9vuhrkEnLJuQk7SF+t4OQob9McXE3s7QgyRopmlKhKo7mh8On7K2BRI5uluL
t0j5kZM0a43EUT5rq9xR8f5pgtyfTMG/FO2MuzZn43MJcZcyfmnOP/cTSIvAKA5U
1i12lxlokYhURNUe+S6jm8A47TrqSRSJxaQJZRlfGJksZ0LJa8eUaLDCviBQEoE=
=6QWZ
-----END PGP SIGNATURE-----
Merge tag 'v4.11-rc7' into drm-next
Backmerge Linux 4.11-rc7 from Linus tree, to fix some
conflicts that were causing problems with the rerere cache
in drm-tip.
Function acpi_parse_entries() is not used any more and if necessary,
acpi_table_parse_entries() can be used instead of it, so drop it.
Signed-off-by: Baoquan He <bhe@redhat.com>
[ rjw: Subject / changelog ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Computed delivered performance using CPPC feedback counters are in the
CPPC abstract scale, whereas cppc_cpufreq driver operates in KHz scale.
Exposing the CPPC performance capabilities (highest,lowest, nominal,
lowest non-linear) will allow userspace to figure out the conversion
factor from CPPC abstract scale to KHz.
Also rename ctr_wrap_time to wraparound_time so that show_cppc_data()
macro will work with it.
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Read lowest non linear perf in cppc_get_perf_caps so that it can be exposed
via sysfs to the usespace. Lowest non linear perf is the lowest performance
level at which nonlinear power savings are achieved.
Signed-off-by: Prashanth Prakash <pprakash@codeaurora.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
A 64-bit value is not needed since a PCI ROM address consists in 32 bits.
This fixes a clang warning about "implicit conversion from 'unsigned long'
to 'u32'".
Also remove now unnecessary casts to u32 from __pci_read_base() and
pci_std_update_resource().
Signed-off-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
The stub get_unmapped_area() function was actually getting called, so
all of our mmap()s failed.
Cc: Yannick Fertre <yannick.fertre@st.com>
Fixes: 97bf3a9aa6 ("drm/cma: Update DEFINE_DRM_GEM_CMA_FOPS to add get_unmapped_area")
Signed-off-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170417233124.18420-1-eric@anholt.net
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
pci_host_common_probe() is defined when CONFIG_PCI_HOST_COMMON=y;
therefore the function declaration should match that.
drivers/pci/host/pcie-tango.c:300:9: error:
implicit declaration of function 'pci_host_common_probe'
Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
A group of Linux kernel hackers reported chasing a bug that resulted
from their assumption that SLAB_DESTROY_BY_RCU provided an existence
guarantee, that is, that no block from such a slab would be reallocated
during an RCU read-side critical section. Of course, that is not the
case. Instead, SLAB_DESTROY_BY_RCU only prevents freeing of an entire
slab of blocks.
However, there is a phrase for this, namely "type safety". This commit
therefore renames SLAB_DESTROY_BY_RCU to SLAB_TYPESAFE_BY_RCU in order
to avoid future instances of this sort of confusion.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: <linux-mm@kvack.org>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
[ paulmck: Add comments mentioning the old name, as requested by Eric
Dumazet, in order to help people familiar with the old name find
the new one. ]
Acked-by: David Rientjes <rientjes@google.com>
Frameworks (e.g. Ion) may want to iterate over each possible CMA area to
allow for enumeration. Introduce a function to allow a callback.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Frameworks that may want to enumerate CMA heaps (e.g. Ion) will find it
useful to have an explicit name attached to each region. Store the name
in each CMA structure.
Signed-off-by: Laura Abbott <labbott@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These are small wrappers around request_threaded_irq() and free_irq(),
which dynamically allocate space for the device name so that drivers don't
need to keep static buffers for these around. Additionally it works with
device-relative vector numbers to make the usage easier, and force the
IRQF_SHARED flag on given that it has no runtime overhead and should be
supported by all PCI devices.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
This allows callers to get back at them instead of having to store it in
another variable.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
The TREE_SRCU rewrite is large and a bit on the non-simple side, so
this commit helps reduce risk by allowing the old v4.11 SRCU algorithm
to be selected using a new CLASSIC_SRCU Kconfig option that depends
on RCU_EXPERT. The default is to use the new TREE_SRCU and TINY_SRCU
algorithms, in order to help get these the testing that they need.
However, if your users do not require the update-side scalability that
is to be provided by TREE_SRCU, select RCU_EXPERT and then CLASSIC_SRCU
to revert back to the old classic SRCU algorithm.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
In response to automated complaints about modifications to SRCU
increasing its size, this commit creates a tiny SRCU that is
used in SMP=n && PREEMPT=n builds.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
SRCU's implementation of expedited grace periods has always assumed
that the SRCU instance is idle when the expedited request arrives.
This commit improves this a bit by maintaining a count of the number
of outstanding expedited requests, thus allowing prior non-expedited
grace periods accommodate these requests by shifting to expedited mode.
However, any non-expedited wait already in progress will still wait for
the full duration.
Improved control of expedited grace periods is planned, but one step
at a time.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Updating ->srcu_state and ->srcu_gp_seq will lead to extremely complex
race conditions given multiple callback queues, so this commit takes
advantage of the two-bit state now available in rcu_seq counters to
store the state in the bottom two bits of ->srcu_gp_seq.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves the rcu_init_levelspread() function from
kernel/rcu/tree.c to kernel/rcu/rcu.h so that SRCU can access it. This is
another step towards enabling SRCU to create its own combining tree.
This commit is code-movement only, give or take knock-on adjustments.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit moves the C preprocessor code that defines the default shape
of the rcu_node combining tree to a new include/linux/rcu_node_tree.h
file as a first step towards enabling SRCU to create its own combining
tree, which in turn enables SRCU to implement per-CPU callback handling,
thus avoiding contention on the lock currently guarding the single list
of callbacks. Note that users of SRCU still need to know the size of
the srcu_struct structure, hence include/linux rather than kernel/rcu.
This commit is code-movement only.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit switches SRCU from custom-built callback queues to the new
rcu_segcblist structure. This change associates grace-period sequence
numbers with groups of callbacks, which will be needed for efficient
processing of per-CPU callbacks.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
This commit adds grace-period sequence numbers, which will be used to
handle mid-boot grace periods and per-CPU callback lists.
Signed-off-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
