TTM was changed a while back to allow for pipelining of buffer moves, and
part of this was the removal of waiting for a BO to idle before calling
move(), placing the responsibility on the driver to do this if required.
That's all well and good, except, we make use of move_notify() to handle
mapping/unmapping from the GPU VMM as move() isn't called on all paths.
This commit adds a wait before unmapping from a VMM in move_notify(), to
prevent GPU page faults where a buffer is still being accessed.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Cc: stable@vger.kernel.org [v4.8+]
This has been on the TODO list for a while now, recovering from things
such as attempting to execute a push buffer or touch a semaphore in an
unmapped memory area.
The only thing required on the HW side here is that the offending
channel is removed from the runlist, and *not* a full reset of PFIFO.
This used to be a bit messier to handle before the rework to make use
of engine topology info, but is apparently now trivial.
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
Currently the backlight controller is taken as 0. It needs to derive
value from the VBT. Adding the necessary changes.
v2 by Jani:
- drop obsolete comments, drop redundant initialization (Bob)
- merge debug logging into one
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Signed-off-by: Vidya Srinivas <vidya.srinivas@intel.com>
Reviewed-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Bob Paauwe <bob.j.paauwe@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481189178-426-1-git-send-email-jani.nikula@intel.com
Some object retain an extra pin whilst they are active (e.g. contexts).
This excludes them from being considered for eviction unless we idle the
GPU. If before we look at the active list, we retire beforehand we can
hopefully remove a few excess pins and reduce the amount of searching
required.
v2: Similar principle applies to evict_for_vma
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209150555.602-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
In commit a4f5ea64f0 ("drm/i915: Refactor object page API"), I
reordered the object->pages teardown to be more friendly wrt to a
separate obj->mm.lock. However, I overlooked the phys object and left it
with a dangling use-after-free of its phys_handle. Move the allocation
of the phys handle to get_pages and it release to put_pages to prevent
the invalid access and to improve symmetry.
v2: Add commentary about always aligning to page size.
Testcase: igt/drv_selftest/objects
Reported-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Fixes: a4f5ea64f0 ("drm/i915: Refactor object page API")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207133411.8028-1-chris@chris-wilson.co.uk
Looping twice when we can do it once is silly. Also use a consistent
style. Note that there's a good race with the connector list walking,
since that is no longer protected by mode_config.mutex. But that's for
a later patch to fix.
v2: Actually try to not blow up, somehow I lost the hunk that checks
we don't copy too much. Noticed by Chris.
v3:
- squash all drm_mode_getresources cleanups into one
- use consistent style for walking objects (Chris)
v4:
- Use u64_to_user_ptr (Chris)
- Don't forget to copy the last connector (Chris)
v5: Chris was right ...
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161211192019.29603-1-daniel.vetter@ffwll.ch
We thought that no userspace is using them, but oops libdrm is using
them to figure out whether a driver supports modesetting. Check out
drmCheckModesettingSupported but maybe don't because it's horrible and
totally runs counter to where we want to go with libdrm device
handling. The function looks in the device hierarchy for whether
controlD* exist using the following format string:
/sys/bus/pci/devices/%04x:%02x:%02x.%d/drm/controlD%d
The "/drm" subdirectory is the glue directory from the sysfs class
stuff, and the only way to get at it seems to through
kdev->kobj.parent (when kdev is represents e.g. the card0 chardev
instance in sysfs). Git grep says we're not the only ones touching
that, so I hope it's ok we dig into such internals - I couldn't find a
proper interface for getting at the glue directory.
Quick git grep shows that at least -amdgpu, -ati are using this.
-modesetting do not, and on -intel it's only about the 4th fallback
path for device lookup, which is why this didn't blow up earlier.
Oh well, we need to keep it working, and the simplest way is to add a
symlink at the right place in sysfs from controlD* to card*.
v2:
- Fix error path handling by adding if (!minor) return checks (David)
- Fix the controlD* numbers to match what's been there (David)
- Add a comment what exactly userspace minimally needs.
- Correct the analysis for -intel (Chris).
Fixes: 8a357d1004 ("drm: Nerf DRM_CONTROL nodes")
Cc: Dave Airlie <airlied@gmail.com>
Reported-and-tested-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: David Herrmann <dh.herrmann@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161209135656.14881-1-daniel.vetter@ffwll.ch
For PSR2 , as per spec, PSR2_CTL bit 31 to be set.
for psr1, bit 31 in SRD_CTL to be set. Reporting
"HW Enabled & Active bit" status for psr2 from SRD_CTL
gives wrong status.
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Jim Bride <jim.bride@linux.intel.com>
Signed-off-by: vathsala nagaraju <vathsala.nagaraju@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481307129-29354-1-git-send-email-vathsala.nagaraju@intel.com
vc4 already has a proper load sequence, but the unload one needed some
fixups: First unregister, and last drop the final ref.
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
The VEC IP is a TV DAC, providing support for PAL and NTSC standards.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
Some generic TV connector properties are exposed in drm_mode_config, but
they are currently handled independently in each DRM encoder driver.
Extend the drm_connector_state to store TV related states, and modify the
drm_atomic_connector_{set,get}_property() helpers to fill the connector
state accordingly.
Each driver is then responsible for checking and applying the new config
in its ->atomic_mode_{check,set}() operations.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Eric Anholt <eric@anholt.net>
PV_CONTROL_CLK_SELECT_VEC is actually 2 and not 0. Fix the definition and
rework the vc4_set_crtc_possible_masks() to cover the full range of the
PV_CONTROL_CLK_SELECT field.
Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Eric Anholt <eric@anholt.net>
This adds a 'Perf' section to i915.rst with the following sub sections:
- Overview
- Comparison with Core Perf
- i915 Driver Entry Points
- i915 Perf Stream
- i915 Perf Observation Architecture Stream
- All i915 Perf Internals
v2:
section headers in i915.rst (Daniel Vetter)
missing symbol docs + other fixups (Matthew Auld)
Signed-off-by: Robert Bragg <robert@sixbynine.org>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214033.3581-1-robert@sixbynine.org
Some fixes and cleanup, mainly around fbdev emulation. It also adds a
new module parameter which allows to specify the color depth/bpp for
the fbdev emulation (like the IMX DRM driver).
* tag 'drm-fsl-dcu-for-next' of http://git.agner.ch/git/linux-drm-fsl-dcu:
drm/fsl-dcu: introduce kernel parameter to specify fbdev depth
drm/fsl-dcu: remove separate compilation unit for fbdev emulation
drm/fsl-dcu: Propagate the real error code
drm/fsl-dcu: Remove unneeded NULL check
drm/fsl-dcu: disable outputs before unloading driver
drm/fsl-dcu: unload driver before disabling clocks
Another pile of misc stuff, final one for 4.10. If there's some serious
bugfix still I'll send you a pull for drm-misc-next-fixes (like we do with
intel), otherwise this is it and next pull next year for 4.11.
Most interesting bits are probably Chris' fb helper fixes against mst
hotplug oopses.
* tag 'drm-misc-next-2016-12-08' of git://anongit.freedesktop.org/git/drm-misc: (22 commits)
drm: Take ownership of the dmabuf->obj when exporting
drm: Allow CAP_PRIME on !MODESET
drm/fence: add drm_crtc_create_fence()
drm/bridge: analogix: Don't return -EINVAL when panel doesn't support PSR
drm/atomic: doc: remove old comment about nonblocking commits
drm: Don't block the kworker waiting for mode_config.mutex in output_poll()
drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver
drm/amdgpu: don't add files at control minor debugfs directory
drm: allow changing DPMS mode
drm/qxl: fix use of uninitialized variable
drm/qxl: Don't register debugfs for control minors
drm/radeon: don't add files at control minor debugfs directory
drm/vmwgfx: Switch to mode_cmd2
drm/vgem: Use ww_mutex_(un)lock even with a NULL context
drm: Make the connector .detect() callback optional
drm/bridge: tc358767: don't warn if display side ASSR enable fails
drm: Initialise drm_mm.head_node.allocated
drm: Fix locking cargo-cult in encoder/plane init/cleanup
drm/doc: Fix indenting in drm_modeset_lock.c comment
drm: Protect fb_helper list manipulation with a mutex
...
Misc fixes and cleanups for 4.10. Highlights:
- Cursor fixes for radeon and amdgpu
- DPM fixes for some new SI variants
- Powerplay fixes
- Clock and powergating fixes
* 'drm-next-4.10' of git://people.freedesktop.org/~agd5f/linux: (39 commits)
drm/amdgpu/dce6: Set MASTER_UPDATE_MODE to 0 in resume_mc_access as well
drm/amdgpu: use pin rather than pin_restricted in a few cases
drm/amd/powerplay: use pr_debug to print function not implemented message
drm/amd/amdgpu: Add gpr reading for GFX v7
drm/amd/amdgpu: Add gpr reading for GFX v6
drm/amd/amdgpu: Add debugfs support for reading GPRs (v2)
drm/amd/amdgpu: export vbios information (v2)
drm/amd/amdgpu: stored bios_size
drm/amdgpu: update golden setting of tonga
drm/amdgpu/si: load the proper firmware on 0x87 oland boards
drm/amdgpu: add additional pci revision to dpm workaround
drm/radeon/si: load the proper firmware on 0x87 oland boards
drm/radeon: add additional pci revision to dpm workaround
drm/amd/powerplay: Fix potential NULL pointer issue
drm/amdgpu: Don't touch GFX hw during HW fini
drm/amd/powerplay: Adjust the position of data size initial
drm/amd/powerplay: Ignore smu buffer usage
drm/amd/powerplay: cut digest part
drm/amdgpu: drop redundant vi_mqd define
drm/amdgpu: fix gtt available page num accounting
...
* fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail
* fix omapdrm primary plane allocation bug, which makes the display to fail to
come up
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=fhmU
-----END PGP SIGNATURE-----
Merge tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into drm-next
omapdrm fixes for v4.10
* fix tpd12s015's error handling, which causes omap5 uevm HDMI to fail
* fix omapdrm primary plane allocation bug, which makes the display to fail to
come up
* tag 'omapdrm-4.10-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
drm/omap: tpd12s015: fix error handling
drm/omap: fix primary-plane's possible_crtcs
drm: fix possible_crtc's type
According to the previous patch, it's possible atm that we call
intel_do_sagv_disable() only once during the 1ms period and time out if
that call fails. As opposed to this the spec says that we need to keep
retrying this request for a 1ms duration, so let's do this similarly to
the CDCLK change notification request.
v4-5:
- Rebased on the reply_mask, reply change.
v6:
- Remove w/s change. (Lyude)
- Rebased on the timeout_base argument change.
Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Fixes: 656d1b89e5 ("drm/i915/skl: Add support for the SAGV, fix underrun hangs")
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Lyude <lyude@redhat.com> (v4)
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-2-git-send-email-imre.deak@intel.com
commit 848496e590
Author: Ville Syrjälä <ville.syrjala@linux.intel.com>
Date: Wed Jul 13 16:32:03 2016 +0300
drm/i915: Wait up to 3ms for the pcu to ack the cdclk change request on SKL
increased the timeout to match the spec, but we still see a timeout on
at least one SKL. A CDCLK change request following the failed one will
succeed nevertheless.
I could reproduce this problem easily by running kms_pipe_crc_basic in a
loop. In all failure cases _wait_for() was pre-empted for >3ms and so in
the worst case - when the pre-emption happened right after calculating
timeout__ in _wait_for() - we called skl_cdclk_wait_for_pcu_ready() only
once which failed and so _wait_for() timed out. As opposed to this the
spec says to keep retrying the request for at most a 3ms period.
To fix this send the first request explicitly to guarantee that there is
3ms between the first and last request. Though this matches the spec, I
noticed that in rare cases this can still time out if we sent only a few
requests (in the worst case 2) _and_ PCODE is busy for some reason even
after a previous request and a 3ms delay. To work around this retry the
polling with pre-emption disabled to maximize the number of requests.
Also increase the timeout to 10ms to account for interrupts that could
reduce the number of requests. With this change I couldn't trigger
the problem.
v2:
- Use 1ms poll period instead of 10us. (Chris)
v3:
- Poll with pre-emption disabled to increase the number of request
attempts. (Ville, Chris)
- Factor out a helper to poll, it's also needed by the next patch.
v4:
- Pass reply_mask, reply to skl_pcode_request(), instead of assuming the
reply is generic. (Ville)
v5:
- List the request specific timeout values as code comment. (Ville)
v6:
- Try the poll first with preemption enabled.
- Add code comment about first request being queued by PCODE. (Art)
- Add timeout_base_ms argument. (Ville)
v7:
- Clarify code comment about first queued request. (Chris)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Art Runyan <arthur.j.runyan@intel.com>
Cc: <stable@vger.kernel.org> # v4.2- : 3b2c171 : drm/i915: Wait up to 3ms
Cc: <stable@vger.kernel.org> # v4.2-
Fixes: 5d96d8afcf ("drm/i915/skl: Deinit/init the display at suspend/resume")
Reference: https://bugs.freedesktop.org/show_bug.cgi?id=97929
Testcase: igt/kms_pipe_crc_basic/suspend-read-crc-pipe-B
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1480955258-26311-1-git-send-email-imre.deak@intel.com
Looks like this was missed when dce_v6_0.c was added.
Fixes: e2cdf640cb ("drm/amdgpu: add display controller implementation for si v10")
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
We don't require a resticted pinning in these cases, so just
use plain pin.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
For CZ, some function pointers like display_configuration_changed
are not set. So when HW manager tries to configure display, we
end up with messages like
"[ powerplay ] this function not implement!"
in the logs. This message is informational, but lacks details
on which function is not implemented and why.
Rather than using KERN_INFO to print the message everytime the
system boots, we rather use pr_debug so that it is only printed
when debug prints are enabled at runtime.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Arindam Nath <arindam.nath@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Implemented for SGPRs for GFX v8 initially.
(v2) cleanup minor whitespace and remove sanity check and
addressing is in dwords not bytes
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Allows userspace components to fetch information
from the vbios image.
v2: agd: fix warning
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
It's necessary if we want to export vbios image out.
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian Koenig <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When DPMS was introduced to atomic, vblanks only worked when the crtc
was enabled and active. wait_for_vblanks were not converted to check for
crtc_state->active, which may cause an attempt for vblank_get to fail.
This is probably harmless, but convert from enable to active anyway.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1481204729-9058-2-git-send-email-maarten.lankhorst@linux.intel.com
tpd12s015 driver is missing error value handling for gpio
initialization, causing 0 to be returned as an error if gpiod_get_*
fails. This may cause deferred probing to fail.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
We set the possible_crtc for all planes to "(1 << priv->num_crtcs) - 1",
which is fine as the HW planes can be used fro all crtcs. However, when
we're doing that, we are still incrementing 'num_crtcs', and we'll end
up with bad possible_crtcs, preventing the use of the primary planes.
This patch passes a possible_crtcs mask to plane init function so that
we get correct possible_crtc.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
drm_universal_plane_init() and drm_plane_init() take "unsigned long
possible_crtcs" parameter, but then stuff it into uint32_t. Change the
parameter to uint32_t.
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Replace INTEL_ERR_OR_DBG_KMS macro with an intel_err_or_dbg_kms
function to shrink the code and rodata strings.
text data bss dec hex filename
1271480 41831 2016 1315327 1411ff i915.ko.0
1265160 41831 2016 1309007 13f94f i915.ko.2
Total of ~6 KiB saving across text and strings.
v2:
* Annotate the function for printf-style checking.
* Rename to pipe_config_err. (Chris Wilson)
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481021420-5783-1-git-send-email-tvrtko.ursulin@linux.intel.com
Currently the reference for the dmabuf->obj is incremented for the
dmabuf in drm_gem_prime_handle_to_fd() (at the high level userspace
interface), but is released in drm_gem_dmabuf_release() (the lowlevel
handler). Improve the symmetry of the dmabuf->obj ownership by acquiring
the reference in drm_gem_dmabuf_export(). This makes it easier to use
the prime functions directly.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
[danvet: Update kerneldoc.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207214527.22533-1-chris@chris-wilson.co.uk
vgem (and our igt tests using vgem) need this. I suspect etnaviv will
fare similarly.
v2. Make it build. Oops.
Fixes: d5264ed382 ("drm: Return -ENOTSUPP when called for KMS cap with a non-KMS driver")
Cc: Michel Dänzer <michel.daenzer@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161207144939.22756-1-daniel.vetter@ffwll.ch
Add WARN_ON to find_fw_domain to registers related to uninitialized
hardware.
v2:
- Print the uninitialized domains and register (Chris)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Wang Elaine <elaine.wang@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/1481120559-17413-1-git-send-email-joonas.lahtinen@linux.intel.com
first set of fixes for -next.
* tag 'drm-intel-next-fixes-2016-12-07' of git://anongit.freedesktop.org/git/drm-intel:
drm/i915: Move priority bumping for flips earlier
drm/i915: Hold a reference on the request for its fence chain
drm/i915/audio: fix hdmi audio noise issue
drm/i915/debugfs: Increment return value of gt.next_seqno
drm/i915/debugfs: Drop i915_hws_info
drm/i915: Initialize dev_priv->atomic_cdclk_freq at init time
drm/i915: Fix cdclk vs. dev_cdclk mess when not recomputing things
drm/i915: Make skl_write_{plane,cursor}_wm() static
drm/i915: Complete requests in nop_submit_request
drm/i915/gvt: fix lock not released bug for dispatch_workload() err path
drm/i915/gvt: fix getting 64bit bar size error
drm/i915/gvt: fix missing init param.primary
Select DRM_PANEL, since the MXSFB driver depends on it. Otherwise,
we get the following error when compiling:
drivers/built-in.o: In function `mxsfb_probe':
core.c:(.text+0x9ce9c): undefined reference to `drm_panel_attach'
core.c:(.text+0x9cff0): undefined reference to `drm_panel_detach'
drivers/built-in.o: In function `mxsfb_panel_connector_destroy':
core.c:(.text+0x9d614): undefined reference to `drm_panel_detach'
drivers/built-in.o: In function `mxsfb_create_output':
core.c:(.text+0x9d68c): undefined reference to `of_drm_find_panel'
make: *** [Makefile:962: vmlinux] Error 1
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Dave Airlie <airlied@redhat.com>
Reported-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Pineview deserves to use its own platform enum (which was already added,
unused, previously). IS_G33() no longer matches Pineview, and gets
replaced by IS_G33() || IS_PINEVIEW() or equivalent. Pineview is no
longer an outlier among platform definitions.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1481143689-19672-1-git-send-email-jani.nikula@intel.com
This patch Adds a function to extract intel_crtc_state from the
atomic_state, if not available it returns NULL.
v2 (from Paulo):
- Fix white space problem detected by checkpatch.
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-7-mahesh1.kumar@intel.com
This patch changes Watermak calculation to fixed point calculation.
Problem with current calculation is during plane_blocks_per_line
calculation we divide intermediate blocks with min_scanlines and
takes floor of the result because of integer operation.
hence we end-up assigning less blocks than required. Which leads to
flickers.
Changes since V1:
- Add fixed point data type as per Paulo's review
Changes since V2:
- use fixed_point instead of fp_16_16
Changes since V3:
- rebase
Changes since V4 (from Paulo):
- My original renaming suggestion was misunderstood, so implement it
- Simplify fixed_16_16_to_u32 implementation
- Fix indentation
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20161201154940.24446-6-mahesh1.kumar@intel.com
