Add Wenjia as maintainer for Shared Memory Communications (SMC)
Sockets.
Acked-by: Wenjia Zhang <wenjia@linux.ibm.com>
Acked-by: Alexandra Winter <wintera@linux.ibm.com>
Signed-off-by: Karsten Graul <kgraul@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arun Ramadoss says:
====================
net: dsa: microchip: DSA Driver support for LAN937x
LAN937x is a Multi-Port 100BASE-T1 Ethernet Physical Layer switch
compliant with the IEEE 802.3bw-2015 specification. The device provides
100 Mbit/s transmit and receive capability over a single Unshielded
Twisted Pair (UTP) cable. LAN937x is successive revision of KSZ series
switch.
This series of patches provide the DSA driver support for
Microchip LAN937X switch through MII/RMII interface. The RGMII interface
support will be added in the follow up series. LAN937x uses the most of
functionality of KSZ9477.
The LAN937x switch series family consists of following SKUs:
LAN9370:
- 4 T1 Phys
- 1 RGMII port
LAN9371:
- 3 T1 Phys & 1 TX Phy
- 2 RGMII ports
LAN9372:
- 5 T1 Phys & 1 TX Phy
- 2 RGMII ports
LAN9373:
- 5 T1 Phys
- 2 RGMII
- 1 SGMII port
LAN9374:
- 6 T1 Phys
- 2 RGMII ports
Changes in v15:
- fixed compilation issue.
- Updated the phylink_mac_link_up to check only for 10/100/1000 speed.
Changes in v14:
- Updated the patch series to latest ksz code refactoring.
- RGMII register configuration is removed from the series. It will be added in
the follow up patch series.
Changes in v13:
- Fixed the compilation issue in patch 5 and 6
Changes in v12:
- Removed the reduntant spi indirect enable in lan937x_init
- Used the ksz_port_stp_state_set function
- Apply rgmii internal delay only if it is rgmii port
- Set the bit for 100baseTx in phylink_get_caps
- Moved the ethtool related API from patch 5 to 7
- Moved lan_alu_entry struct in lan937x_dev.h from patch 5 to 9
- Moved lan_vlan_entry in lan937x_dev.h from patch 5 to 10
- Used the ksz_get_stats64 function for get_stats64 hook
- Splitted the patch 5. one for port configuration, spi driver, phy read &
write and mtu configuration.
- Updated the indentation in ethernet-controller.yaml
- lan937x.yaml: Removed the blank lines, updated the ethernet handle to macb0.
Added the rgmii internal delay only for the ports.
Changes in v11:
- Tagged as RFC to get the feedback for the subpatches 1/10, 5/10 and 6/10
Changes in v10:
- dsa.yaml: dropped moving mdio properties to dsa.yaml as per the feedback
https://patchwork.kernel.org/project/netdevbpf/patch/20220318085540.281721-3-prasanna.vengateshan@microchip.com/#24787466
- microchip,lan937x.yaml: Naming convention changes in the example
- lan937x_main.c: Moving configurations from lan937x_reset_switch() to setup()
- lan937x_main.c: helper function has been introduced for
lan937x_internal_phy_read & write
- lan937x_dev.h: lan_alu_struct struct data type changes
- lan937x_main.c: lan937x_get_stats64 make non blocking
- lan937x_main.c: modified lan937x_port_mirror_add to include extack
Changes in v9:
- lan937x_main.c: of_node_put() correction in lan937x_parse_dt_rgmii_delay
- lan937x_dev.c: removed the interface checks from lan937x_apply_rgmii_delay.
- changes in ethernet-controller.yaml and dsa.yaml
Changes in v8:
- lan937x_dev.c: fixed lan937x_r_mib_pkt warning in the sub patches
- lan937x_main.c: phylink_autoneg_inband() check removed in
lan937x_phylink_mac_link_up()
- lan937x_main.c: made legacy_pre_march2020 = false as this is non-legacy driver
and indentation correction in lan937x_phylink_mac_link_up()
- removed unnecessary parenthesis in lan937x_get_strings()
Changes in v7:
- microchip,lan937x.yaml: *-internal-delay-ps enum values & commit messages
corrections
- lan937x_main.c: removed phylink_validate() and added phylink_get_caps()
- lan937x_main.c: added support for ethtool standard stats (get_eth_*_stats
and get_stats64)
- lan937x_main.c: removed unnecessary PVID read from lan937x_port_vlan_del()
- integrated the changes of ksz9477 multi bridging support to lan937x dev and
tested both multi bridging and STP
- lan937x_port_vlan_del - dummy pvid read removed
Changes in v6:
- microchip_t1.c: There was new merge done in the net-next tree for
microchip_1.c after the v5 submission. Hence rebased it for v6.
Changes in v5:
- microchip,lan937x.yaml: Added mdio properties detail
- microchip,lan937x.yaml: *-internal-delay-ps added under port node
- lan937x_dev.c: changed devm_mdiobus_alloc from of_mdiobus_register as suggested
by Vladimir
- lan937x_dev.c: added dev_info for rgmii internal delay & error message to user
in case of out of range values
- lan937x_dev.c: return -EOPNOTSUPP for C45 regnum values for
lan937x_sw_mdio_read & write operations
- return from function with out storing in a variable
- lan937x_main.c: Added vlan_enable info in vlan_filtering API
- lan937x_main.c: lan937x_port_vlan_del: removed unintended PVID write
Changes in v4:
- tag_ksz.c: cpu_to_be16 to put_unaligned_be16
- correct spacing in comments
- tag_ksz.c: NETIF_F_HW_CSUM fix is integrated
- lan937x_dev.c: mdio_np is removed from global and handled locally
- lan937x_dev.c: unused functions removed lan937x_cfg32 & lan937x_port_cfg32
- lan937x_dev.c: lan937x_is_internal_100BTX_phy_port function name changes
- lan937x_dev.c: RGMII internal delay handling for MAC. Delay values are
retrieved from DTS and updated
- lan937x_dev.c: corrected mutex operations for few dev variables
- microchip,lan937x.yaml: introduced rx-internal-delay-ps &
tx-internal-delay-ps for RGMII internal delay
- lan937x_dev.c: Unnecessary mutex_lock has been removed
- lan937x_main.c: PHY_INTERFACE_MODE_NA handling for lan937x_phylink_validate
- lan937x_main.c: PORT_MIRROR_SNIFFER check in right place
- lan937x_main.c: memset is used instead of writing 0's individually in
lan937x_port_fdb_add function
- lan937x_main.c: Removed \n from NL_SET_ERR_MSG_MOD calls
Changes in v3:
- Removed settings of cnt_ptr to zero and the memset()
added a cleanup patch which moves this into ksz_init_mib_timer().
- Used ret everywhere instead of rc
- microchip,lan937x.yaml: Remove mdio compatible
- microchip_t1.c: Renaming standard phy registers
- tag_ksz.c: LAN937X_TAIL_TAG_OVERRIDE renaming
LAN937X_TAIL_TAG_BLOCKING_OVERRIDE
- tag_ksz.c: Changed Ingress and Egress naming convention based on
Host
- tag_ksz.c: converted to skb_mac_header(skb) from
(is_link_local_ether_addr(hdr->h_dest))
- lan937x_dev.c: Removed BCAST Storm protection settings since we
have Tc commands for them
- lan937x_dev.c: Flow control setting in lan937x_port_setup function
- lan937x_dev.c: RGMII internal delay added only for cpu port,
- lan937x_dev.c: of_get_compatible_child(node,
"microchip,lan937x-mdio") to of_get_child_by_name(node, "mdio");
- lan937x_dev.c:lan937x_get_interface API: returned
PHY_INTERFACE_MODE_INTERNAL instead of PHY_INTERFACE_MODE_NA
- lan937x_main.c: Removed compat interface implementation in
lan937x_config_cpu_port() API & dev_info corrected as well
- lan937x_main.c: deleted ds->configure_vlan_while_not_filtering
= true
- lan937x_main.c: Added explanation for lan937x_setup lines
- lan937x_main.c: FR_MAX_SIZE correction in lan937x_get_max_mtu API
- lan937x_main.c: removed lan937x_port_bridge_flags dummy functions
- lan937x_spi.c - mdiobus_unregister to be added to spi_remove
function
- lan937x_main.c: phy link layer changes
- lan937x_main.c: port mirroring: sniff port selection limiting to
one port
- lan937x_main.c: Changed to global vlan filtering
- lan937x_main.c: vlan_table array to structure
- lan937x_main.c -Use extack instead of reporting errors to Console
- lan937x_main.c - Remove cpu_port addition in vlan_add api
- lan937x_main.c - removed pvid resetting
Changes in v2:
- return check for register read/writes
- dt compatible compatible check is added against chip id value
- lan937x_internal_t1_tx_phy_write() is renamed to
lan937x_internal_phy_write()
- lan937x_is_internal_tx_phy_port is renamed to
lan937x_is_internal_100BTX_phy_port as it is 100Base-Tx phy
- Return value for lan937x_internal_phy_write() is -EOPNOTSUPP
in case of failures
- Return value for lan937x_internal_phy_read() is 0xffff
for non existent phy
- cpu_port checking is removed from lan937x_port_stp_state_set()
- lan937x_phy_link_validate: 100baseT_Full to 100baseT1_Full
- T1 Phy driver is moved to drivers/net/phy/microchip_t1.c
- Tx phy driver support will be added later
- Legacy switch checkings in dts file are removed.
- tag_ksz.c: Re-used ksz9477_rcv for lan937x_rcv
- tag_ksz.c: Xmit() & rcv() Comments are corrected w.r.to host
- net/dsa/Kconfig: Family skew numbers altered in ascending order
- microchip,lan937x.yaml: eth is replaced with ethernet
- microchip,lan937x.yaml: spi1 is replaced with spi
- microchip,lan937x.yaml: cpu labelling is removed
- microchip,lan937x.yaml: port@x value will match the reg value now
====================
This patch add the LAN937x part support in the existing ksz_spi_probe.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support for phylink_mac_config dsa hook. It configures
the mac for MII/RMII modes. The RGMII mode will be added in the future
patches.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support for phylink_mac_link_up. It configures the mac
for the speed, flow control and duplex mode.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The internal phy of the LAN937x are capable of 100Mbps Full duplex. The
xMII port of switch is capable of 10Mbps Full & Half Duplex, 100Mbps
Full & Half Duplex and 1000Mbps Half duplex. xMII port also supports Tx
and Rx Flow control.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add the support for port_max_mtu, port_change_mtu and
port_fast_age dsa functionality.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch register mdio-bus for the lan937x series switch. mdio read
and write uses the vphy for accessing the phy register.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch add support for the writing and reading of the phy registers.
LAN937x uses the Vphy indirect addressing method for accessing the phys.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch update the ksz_get_tag_protocol to return LAN937x specific
tag if the chip id matches one of LAN937x series switch
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Basic DSA driver support for lan937x and the device will be
configured through SPI interface.
It adds the lan937x_dev_ops in ksz_common.c file and tries to reuse the
functionality of ksz9477 series switch.
drivers/net/dsa/microchip/ path is already part of MAINTAINERS &
the new files come under this path. Hence no update needed to the
MAINTAINERS
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The ksz9477 and lan937x has few difference in the static and reserved
table register 0x041C. For the ksz9477 if the bit 0 is 1 - read
operation and 0 - write operation. But for lan937x bit 1:0 used for
selecting the read/write operation, 01 - write and 10 - read.
To use ksz9477 mdb add/del and enable_stp_addr for the lan937x, masks &
shifts are introduced for ksz9477 & lan937x in ksz_common.c. Then
updated the function with masks & shifts based on the switch instead of
hard coding it.
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The Microchip LAN937X switches have a tagging protocol which is
very similar to KSZ tagging. So that the implementation is added to
tag_ksz.c and reused common APIs
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Documentation in .yaml format and updates to the MAINTAINERS
Also 'make dt_binding_check' is passed.
RGMII internal delay values for the mac is retrieved from
rx-internal-delay-ps & tx-internal-delay-ps as per the feedback from
v3 patch series.
https://lore.kernel.org/netdev/20210802121550.gqgbipqdvp5x76ii@skbuf/
It supports only the delay value of 0ns and 2ns.
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
*-internal-delay-ps properties would be applicable only for RGMII interface
modes.
It is changed as per the request.
Ran dt_binding_check to confirm nothing is broken.
link: https://lore.kernel.org/netdev/d8e5f6a8-a7e1-dabd-f4b4-ea8ea21d0a1d@gmail.com/
Signed-off-by: Prasanna Vengateshan <prasanna.vengateshan@microchip.com>
Signed-off-by: Arun Ramadoss <arun.ramadoss@microchip.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Divya Koppera says:
====================
net: LED feature for LAN8814 PHY
Enable LED mode configuration for LAN8814 PHY
v2 -> v3:
- Fixed compilation issues
v1 -> v2:
- Updated dt-bindings for micrel,led-mode in LAN8814 PHY
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
LED support for extended mode where
LED 1: Enhanced Mode 5 (10M/1000M/Activity)
LED 2: Enhanced Mode 4 (100M/1000M/Activity)
By default it supports KSZ9031 LED mode
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Enable led-mode configuration for LAN8814 phy
Signed-off-by: Divya Koppera <Divya.Koppera@microchip.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Most drivers use "skb_transport_offset(skb) + tcp_hdrlen(skb)"
to compute headers length for a TCP packet, but others
use more convoluted (but equivalent) ways.
Add skb_tcp_all_headers() and skb_inner_tcp_all_headers()
helpers to harmonize this a bit.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Set return value in rsp_buf alloc error path before going to
error handling.
drivers/misc/cardreader/rtsx_usb.c:639:6: warning: variable 'ret' is used uninitialized whenever 'if' condition is true [-Wsometimes-uninitialized]
if (!ucr->rsp_buf)
^~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:678:9: note: uninitialized use occurs here
return ret;
^~~
drivers/misc/cardreader/rtsx_usb.c:639:2: note: remove the 'if' if its condition is always false
if (!ucr->rsp_buf)
^~~~~~~~~~~~~~~~~~
drivers/misc/cardreader/rtsx_usb.c:622:9: note: initialize the variable 'ret' to silence this warning
int ret;
^
= 0
Fixes: 3776c78559 ("misc: rtsx_usb: use separate command and response buffers")
Reported-by: kernel test robot <lkp@intel.com>
Cc: stable <stable@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Link: https://lore.kernel.org/r/20220701165352.15687-1-skhan@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When it synthesize various task events, it scans the list of task
first and then accesses later. There's a window threads can die
between the two and proc entries may not be available.
Instead of bailing out, we can ignore that thread and move on.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It should not sort the result as procfs already returns a proper
ordering of tasks. Actually sorting the order caused problems that it
doesn't guararantee to process the main thread first.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701205458.985106-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit dc2cf4ca86 ("perf unwind: Fix segbase for ld.lld linked
objects") uncovered the following issue on aarch64:
util/unwind-libunwind-local.c: In function 'find_proc_info':
util/unwind-libunwind-local.c:386:28: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
386 | if (ofs > 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
util/unwind-libunwind-local.c:371:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
371 | if (ofs <= 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
util/unwind-libunwind-local.c:363:20: error: 'offset' may be used uninitialized in this function [-Werror=maybe-uninitialized]
363 | if (ofs <= 0) {
| ^
util/unwind-libunwind-local.c:199:22: note: 'offset' was declared here
199 | u64 address, offset;
| ^~~~~~
In file included from util/libunwind/arm64.c:37:
Fixes: dc2cf4ca86 ("perf unwind: Fix segbase for ld.lld linked objects")
Signed-off-by: Ivan Babrou <ivan@cloudflare.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ian Rogers <irogers@google.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: kernel-team@cloudflare.com
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220701182046.12589-1-ivan@cloudflare.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 8fffa0e345 ("selftests/bpf: Normalize XDP section names in
selftests") the xdp_dummy.o's section name has changed to xdp. But some
tests are still using "section xdp_dummy", which make the tests failed.
Fix them by updating to the new section name.
Fixes: 8fffa0e345 ("selftests/bpf: Normalize XDP section names in selftests")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/r/20220630062228.3453016-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Delete the redundant word 'the'.
Delete the redundant word 'is'.
Delete the redundant word 'start'.
Delete the redundant word 'checking'.
Signed-off-by: Jilin Yuan <yuanjilin@cdjrlc.com>
Link: https://lore.kernel.org/r/20220630130916.21074-1-yuanjilin@cdjrlc.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2022-07-02
We've added 7 non-merge commits during the last 14 day(s) which contain
a total of 6 files changed, 193 insertions(+), 86 deletions(-).
The main changes are:
1) Fix clearing of page contiguity when unmapping XSK pool, from Ivan Malov.
2) Two verifier fixes around bounds data propagation, from Daniel Borkmann.
3) Fix fprobe sample module's parameter descriptions, from Masami Hiramatsu.
4) General BPF maintainer entry revamp to better scale patch reviews.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, selftests: Add verifier test case for jmp32's jeq/jne
bpf, selftests: Add verifier test case for imm=0,umin=0,umax=1 scalar
bpf: Fix insufficient bounds propagation from adjust_scalar_min_max_vals
bpf: Fix incorrect verifier simulation around jmp32's jeq/jne
xsk: Clear page contiguity bit when unmapping pool
bpf, docs: Better scale maintenance of BPF subsystem
fprobe, samples: Add module parameter descriptions
====================
Link: https://lore.kernel.org/r/20220701230121.10354-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver has long since be converted to dynamic debugging.
The internal compile options for more debugging can simply be
deleted.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Link: https://lore.kernel.org/r/20220630110741.21314-1-oneukum@suse.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
As stated by Russel King, miic_config() can be called as a result of
ethtool setting the configuration while the link is already up. Since
the speed is also set in this function, it could potentially modify
the current speed that is set. This will only happen if there is
no PHY present and we aren't using fixed-link mode.
Handle that by storing the current interface mode in the miic_port
structure and update the speed only if the interface mode is going to
be changed.
Signed-off-by: Clément Léger <clement.leger@bootlin.com>
Link: https://lore.kernel.org/r/20220629122003.189397-1-clement.leger@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
where accounting for poison blocks to be cleared was off by one,
causing a failure to clear the the last badblock in an nvdimm region.
-----BEGIN PGP SIGNATURE-----
iHUEABYKAB0WIQT9vPEBxh63bwxRYEEPzq5USduLdgUCYr9gEwAKCRAPzq5USduL
doTrAQDIrvLTM/bzCBnUIvkERTkalthTKvHiakw5lYD6z6XnxAEAmGvjdXn9q/UF
BwDrNSP0XyD4M3PZZeBhK/9zsETNGws=
=wJnW
-----END PGP SIGNATURE-----
Merge tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm fix from Vishal Verma:
- Fix a bug in the libnvdimm 'BTT' (Block Translation Table) driver
where accounting for poison blocks to be cleared was off by one,
causing a failure to clear the the last badblock in an nvdimm region.
* tag 'libnvdimm-fixes-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
nvdimm: Fix badblocks clear off-by-one error
Adjust documents to the file moves made by commit cfc1d27789 ("module:
Move all into module/").
Thanks to Yanteng Si for helping me to update
Documentation/translations/zh_CN/core-api/kernel-api.rst
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
When CONFIG_MODULE_UNLOAD is not selected, 'exit' is
set but never used.
It is not possible to replace the #ifdef CONFIG_MODULE_UNLOAD by
IS_ENABLED(CONFIG_MODULE_UNLOAD) because mod->exit doesn't exist
when CONFIG_MODULE_UNLOAD is not selected.
And because of the rcu_read_lock_sched() section it is not easy
to regroup everything in a single #ifdef. Let's regroup partially
and add missing #ifdef to completely opt out the use of
'exit' when CONFIG_MODULE_UNLOAD is not selected.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
cppcheck reports the following warnings:
kernel/module/main.c:1455:26: warning: Redundant assignment of 'mod->core_layout.size' to itself. [selfAssignment]
mod->core_layout.size = strict_align(mod->core_layout.size);
^
kernel/module/main.c:1489:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1493:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1504:26: warning: Redundant assignment of 'mod->init_layout.size' to itself. [selfAssignment]
mod->init_layout.size = strict_align(mod->init_layout.size);
^
kernel/module/main.c:1459:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1463:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
kernel/module/main.c:1467:26: warning: Redundant assignment of 'mod->data_layout.size' to itself. [selfAssignment]
mod->data_layout.size = strict_align(mod->data_layout.size);
^
This is due to strict_align() being a no-op when
CONFIG_STRICT_MODULE_RWX is not selected.
Transform strict_align() macro into an inline function. It will
allow type checking and avoid the selfAssignment warning.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
The commit 91fb02f315 ("module: Move kallsyms support into a separate
file") changed from using strlcpy() to using strscpy() which created a
buffer overflow. That happened because:
1) an incorrect value was passed as the buffer length
2) strscpy() (unlike strlcpy()) may copy beyond the length of the
input string when copying word-by-word.
The assumption was that because it was already known that the strings
being copied would fit in the space available, it was not necessary
to correctly set the buffer length. strscpy() breaks that assumption
because although it will not touch bytes beyond the given buffer length
it may write bytes beyond the input string length when writing
word-by-word.
The result of the buffer overflow is to corrupt the symbol type
information that follows. e.g.
$ sudo cat -v /proc/kallsyms | grep '\^' | head
ffffffffc0615000 ^@ rfcomm_session_get [rfcomm]
ffffffffc061c060 ^@ session_list [rfcomm]
ffffffffc06150d0 ^@ rfcomm_send_frame [rfcomm]
ffffffffc0615130 ^@ rfcomm_make_uih [rfcomm]
ffffffffc07ed58d ^@ bnep_exit [bnep]
ffffffffc07ec000 ^@ bnep_rx_control [bnep]
ffffffffc07ec1a0 ^@ bnep_session [bnep]
ffffffffc07e7000 ^@ input_leds_event [input_leds]
ffffffffc07e9000 ^@ input_leds_handler [input_leds]
ffffffffc07e7010 ^@ input_leds_disconnect [input_leds]
Notably, the null bytes (represented above by ^@) can confuse tools.
Fix by correcting the buffer length.
Fixes: 91fb02f315 ("module: Move kallsyms support into a separate file")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
another firmware issue. The firmware is not conformant to the spec and
we now have to workaround as this may be copied to other platforms as
well. The spec expects to return size of 3 for a range clock rate
description while the firmware returns 1. We have other ways to validate
all the 3 entries the driver reads are polpulated and we use the same
to workaround this firmware bug.
2. Optee transport not setting the correct reponse length which is similar
to the one reported earlier on Rockchip platform.
3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
ida_{alloc,free}
-----BEGIN PGP SIGNATURE-----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=xRfp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=sgSb
-----END PGP SIGNATURE-----
Merge tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux into arm/fixes
Arm SCMI firmware driver fixes for v5.19
Few more fixes to address:
1. Issue reported on Juno with HDLCD clock which turned out to be yet
another firmware issue. The firmware is not conformant to the spec and
we now have to workaround as this may be copied to other platforms as
well. The spec expects to return size of 3 for a range clock rate
description while the firmware returns 1. We have other ways to validate
all the 3 entries the driver reads are polpulated and we use the same
to workaround this firmware bug.
2. Optee transport not setting the correct reponse length which is similar
to the one reported earlier on Rockchip platform.
3. Drop the usage of the deprecated ida_simple_{get,remove} and migrate to the
ida_{alloc,free}
* tag 'scmi-fixes-5.19-2' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Remove usage of the deprecated ida_simple_xxx API
firmware: arm_scmi: Fix response size warning for OPTEE transport
firmware: arm_scmi: Relax CLOCK_DESCRIBE_RATES out-of-spec checks
Link: https://lore.kernel.org/r/20220628133315.699803-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar).
-----BEGIN PGP SIGNATURE-----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=F4yU
-----END PGP SIGNATURE-----
Merge tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull thermal control fix from Rafael Wysocki:
"Add a new CPU ID to the list of supported processors in the
intel_tcc_cooling driver (Sumeet Pawnikar)"
* tag 'thermal-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel_tcc_cooling: Add TCC cooling support for RaptorLake
Add a test case to trigger the verifier's incorrect conclusion in the
case of jmp32's jeq/jne. Also here, make use of dead code elimination,
so that we can see the verifier bailing out on unfixed kernels.
Before:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 8 usec
stack depth 0
processed 8 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 0
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 724
#724/p jeq32/jne32: bounds checking OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-4-daniel@iogearbox.net
Add a test case to trigger the constant scalar issue which leaves the
register in scalar(imm=0,umin=0,umax=1,var_off=(0x0; 0x0)) state. Make
use of dead code elimination, so that we can see the verifier bailing
out on unfixed kernels. For the condition, we use jle given it checks
on umax bound.
Before:
# ./test_verifier 743
#743/p jump & dead code elimination FAIL
Failed to load prog 'Permission denied'!
R4 !read_ok
verification time 11 usec
stack depth 0
processed 13 insns (limit 1000000) max_states_per_insn 0 total_states 1 peak_states 1 mark_read 1
Summary: 0 PASSED, 0 SKIPPED, 1 FAILED
After:
# ./test_verifier 743
#743/p jump & dead code elimination OK
Summary: 1 PASSED, 0 SKIPPED, 0 FAILED
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220701124727.11153-3-daniel@iogearbox.net
Kuee reported a corner case where the tnum becomes constant after the call
to __reg_bound_offset(), but the register's bounds are not, that is, its
min bounds are still not equal to the register's max bounds.
This in turn allows to leak pointers through turning a pointer register as
is into an unknown scalar via adjust_ptr_min_max_vals().
Before:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
What can be seen here is that R3=scalar(umin=32767,umax=32768,var_off=(0x7fff;
0x8000)) after the operation R3 += -32767 results in a 'malformed' constant, that
is, R3_w=scalar(imm=0,umax=1,var_off=(0x0; 0x0)). Intersecting with var_off has
not been done at that point via __update_reg_bounds(), which would have improved
the umax to be equal to umin.
Refactor the tnum <> min/max bounds information flow into a reg_bounds_sync()
helper and use it consistently everywhere. After the fix, bounds have been
corrected to R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) and thus the register
is regarded as a 'proper' constant scalar of 0.
After:
func#0 @0
0: R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
0: (b7) r0 = 1 ; R0_w=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0))
1: (b7) r3 = 0 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0))
2: (87) r3 = -r3 ; R3_w=scalar()
3: (87) r3 = -r3 ; R3_w=scalar()
4: (47) r3 |= 32767 ; R3_w=scalar(smin=-9223372036854743041,umin=32767,var_off=(0x7fff; 0xffffffffffff8000),s32_min=-2147450881)
5: (75) if r3 s>= 0x0 goto pc+1 ; R3_w=scalar(umin=9223372036854808575,var_off=(0x8000000000007fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
6: (95) exit
from 5 to 7: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
7: (d5) if r3 s<= 0x8000 goto pc+1 ; R3=scalar(umin=32769,umax=9223372036854775807,var_off=(0x7fff; 0x7fffffffffff8000),s32_min=-2147450881,u32_min=32767)
8: (95) exit
from 7 to 9: R0=scalar(imm=1,umin=1,umax=1,var_off=(0x1; 0x0)) R1=ctx(off=0,imm=0,umax=0,var_off=(0x0; 0x0)) R3=scalar(umin=32767,umax=32768,var_off=(0x7fff; 0x8000)) R10=fp(off=0,imm=0,umax=0,var_off=(0x0; 0x0))
9: (07) r3 += -32767 ; R3_w=scalar(imm=0,umax=0,var_off=(0x0; 0x0)) <--- [*]
10: (95) exit
Fixes: b03c9f9fdc ("bpf/verifier: track signed and unsigned min/max values")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-2-daniel@iogearbox.net
Kuee reported a quirk in the jmp32's jeq/jne simulation, namely that the
register value does not match expectations for the fall-through path. For
example:
Before fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P571 <--- [*]
6: (95) exit
R0 !read_ok
After fix:
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r2 = 0 ; R2_w=P0
1: (b7) r6 = 563 ; R6_w=P563
2: (87) r2 = -r2 ; R2_w=Pscalar()
3: (87) r2 = -r2 ; R2_w=Pscalar()
4: (4c) w2 |= w6 ; R2_w=Pscalar(umin=563,umax=4294967295,var_off=(0x233; 0xfffffdcc),s32_min=-2147483085) R6_w=P563
5: (56) if w2 != 0x8 goto pc+1 ; R2_w=P8 <--- [*]
6: (95) exit
R0 !read_ok
As can be seen on line 5 for the branch fall-through path in R2 [*] is that
given condition w2 != 0x8 is false, verifier should conclude that r2 = 8 as
upper 32 bit are known to be zero. However, verifier incorrectly concludes
that r2 = 571 which is far off.
The problem is it only marks false{true}_reg as known in the switch for JE/NE
case, but at the end of the function, it uses {false,true}_{64,32}off to
update {false,true}_reg->var_off and they still hold the prior value of
{false,true}_reg->var_off before it got marked as known. The subsequent
__reg_combine_32_into_64() then propagates this old var_off and derives new
bounds. The information between min/max bounds on {false,true}_reg from
setting the register to known const combined with the {false,true}_reg->var_off
based on the old information then derives wrong register data.
Fix it by detangling the BPF_JEQ/BPF_JNE cases and updating relevant
{false,true}_{64,32}off tnums along with the register marking to known
constant.
Fixes: 3f50f132d8 ("bpf: Verifier, do explicit ALU32 bounds tracking")
Reported-by: Kuee K1r0a <liulin063@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20220701124727.11153-1-daniel@iogearbox.net
- Fix error code path issues related PROBE_DEFER handling in
devfreq (Christian Marangi).
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn).
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin).
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang).
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He).
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd).
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno).
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).
-----BEGIN PGP SIGNATURE-----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=vqFQ
-----END PGP SIGNATURE-----
Merge tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
"These fix some issues in cpufreq drivers and some issues in devfreq:
- Fix error code path issues related PROBE_DEFER handling in devfreq
(Christian Marangi)
- Revert an editing accident in SPDX-License line in the devfreq
passive governor (Lukas Bulwahn)
- Fix refcount leak in of_get_devfreq_events() in the exynos-ppmu
devfreq driver (Miaoqian Lin)
- Use HZ_PER_KHZ macro in the passive devfreq governor (Yicong Yang)
- Fix missing of_node_put for qoriq and pmac32 driver (Liang He)
- Fix issues around throttle interrupt for qcom driver (Stephen Boyd)
- Add MT8186 to cpufreq-dt-platdev blocklist (AngeloGioacchino Del
Regno)
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su)"
* tag 'pm-5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / devfreq: passive: revert an editing accident in SPDX-License line
PM / devfreq: Fix kernel warning with cpufreq passive register fail
PM / devfreq: Rework freq_table to be local to devfreq struct
PM / devfreq: exynos-ppmu: Fix refcount leak in of_get_devfreq_events
PM / devfreq: passive: Use HZ_PER_KHZ macro in units.h
PM / devfreq: Fix cpufreq passive unregister erroring on PROBE_DEFER
PM / devfreq: Mute warning on governor PROBE_DEFER
PM / devfreq: Fix kernel panic with cpu based scaling to passive gov
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
Merge cpufreq fixes for 5.19-rc5, including ARM cpufreq fixes and the
following one:
- Make amd-pstate enable CPPC on resume from S3 (Jinzhou Su).
* pm-cpufreq:
cpufreq: Add MT8186 to cpufreq-dt-platdev blocklist
cpufreq: pmac32-cpufreq: Fix refcount leak bug
cpufreq: qcom-hw: Don't do lmh things without a throttle interrupt
drivers: cpufreq: Add missing of_node_put() in qoriq-cpufreq.c
cpufreq: amd-pstate: Add resume and suspend callbacks
* Fix error handling in ibmaem driver initialization
* Fix bad data reported by occ driver after setting power cap
* Fix typos in pmbus/ucd9200 driver comments
-----BEGIN PGP SIGNATURE-----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=OV79
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- Fix error handling in ibmaem driver initialization
- Fix bad data reported by occ driver after setting power cap
- Fix typos in pmbus/ucd9200 driver comments
* tag 'hwmon-for-v5.19-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ibmaem) don't call platform_device_del() if platform_device_add() fails
hwmon: (pmbus/ucd9200) fix typos in comments
hwmon: (occ) Prevent power cap command overwriting poll response
Because pm_runtime_get_suppliers() bumps up the rpm_active counter
of each device link to a supplier of the given device in addition
to bumping up the supplier's PM-runtime usage counter, a runtime
suspend of the consumer device may case the latter to go down to 0
when pm_runtime_put_suppliers() is running on a remote CPU. If that
happens after pm_runtime_put_suppliers() has released power.lock for
the consumer device, and a runtime resume of that device takes place
immediately after it, before pm_runtime_put() is called for the
supplier, that pm_runtime_put() call may cause the supplier to be
suspended even though the consumer is active.
To prevent that from happening, modify pm_runtime_get_suppliers() to
call pm_runtime_get_sync() for the given device's suppliers without
touching the rpm_active counters of the involved device links
Accordingly, modify pm_runtime_put_suppliers() to call pm_runtime_put()
for the given device's suppliers without looking at the rpm_active
counters of the device links at hand. [This is analogous to what
happened before commit 4c06c4e6cf ("driver core: Fix possible
supplier PM-usage counter imbalance").]
Since pm_runtime_get_suppliers() sets supplier_preactivated for each
device link where the supplier's PM-runtime usage counter has been
incremented and pm_runtime_put_suppliers() calls pm_runtime_put() for
the suppliers whose device links have supplier_preactivated set, the
PM-runtime usage counter is balanced for each supplier and this is
independent of the runtime suspend and resume of the consumer device.
However, in case a device link with DL_FLAG_PM_RUNTIME set is dropped
during the consumer device probe, so pm_runtime_get_suppliers() bumps
up the supplier's PM-runtime usage counter, but it cannot be dropped by
pm_runtime_put_suppliers(), make device_link_release_fn() take care of
that.
Fixes: 4c06c4e6cf ("driver core: Fix possible supplier PM-usage counter imbalance")
Reported-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Instead of passing an extra bool argument to pm_runtime_release_supplier(),
make its callers take care of triggering a runtime-suspend of the
supplier device as needed.
No expected functional impact.
Suggested-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
If platform_device_add() fails, it no need to call platform_device_del(), split
platform_device_unregister() into platform_device_del/put(), so platform_device_put()
can be called separately.
Fixes: 8808a793f0 ("ibmaem: new driver for power/energy/temp meters in IBM System X hardware")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20220701074153.4021556-1-yangyingliang@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
