The SJA1110 switch integrates TJA1103 PHYs, but in SJA1110 switch rev B
silicon, there is a bug in that the registers for selecting the 100base-T1
autoneg master/slave roles are not writable.
To enable write access to the master/slave registers, these additional
PHY writes are necessary during initialization.
The issue has been corrected in later SJA1110 silicon versions and is
not present in the standalone PHY variants, but applying the workaround
unconditionally in the driver should not do any harm.
Suggested-by: Radu Pirea (NXP OSS) <radu-nicolae.pirea@oss.nxp.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reconstruction procedure for partial timestamps reads the current
PTP time and fills in the low 2 bits of the second portion, as well as
the nanoseconds portion, from the actual hardware packet timestamp.
Critically, the reconstruction procedure works because it assumes that
the current PTP time is strictly larger than the hardware timestamp was:
it detects a 2-bit wraparound of the 'seconds' portion by checking whether
the 'seconds' portion of the partial hardware timestamp is larger than
the 'seconds' portion of the current time. That can only happen if the
hardware timestamp was captured by the PHY during the last phase of a
'modulo 4 seconds' interval, and the current PTP time was read by the
driver during the initial phase of the next 'modulo 4 seconds' interval.
The partial RX timestamps are added to priv->rx_queue in
nxp_c45_rxtstamp() and they are processed potentially in parallel by the
aux worker thread in nxp_c45_do_aux_work(). This means that it is
possible for nxp_c45_do_aux_work() to process more than one RX timestamp
during the same schedule.
There is one premature optimization that will cause issues: for RX
timestamping, the driver reads the current time only once, and it uses
that to reconstruct all PTP RX timestamps in the queue. For the second
and later timestamps, this will be an issue if we are processing two RX
timestamps which are to the left and to the right, respectively, of a
4-bit wraparound of the 'seconds' portion of the PTP time, and the
current PTP time is also pre-wraparound.
0.000000000 4.000000000 8.000000000 12.000000000
|..................|..................|..................|............>
^ ^ ^ ^ time
| | | |
| | | process hwts 1 and hwts 2
| | |
| | hwts 2
| |
| read current PTP time
|
hwts 1
What will happen in that case is that hwts 2 (post-wraparound) will use
a stale current PTP time that is pre-wraparound.
But nxp_c45_reconstruct_ts will not detect this condition, because it is
not coded up for it, so it will reconstruct hwts 2 with a current time
from the previous 4 second interval (i.e. 0.something instead of
4.something).
This is solvable by making sure that the full 64-bit current time is
always read after the PHY has taken the partial RX timestamp. We do this
by reading the current PTP time for every timestamp in the RX queue.
Fixes: 514def5dd3 ("phy: nxp-c45-tja11xx: add timestamping support")
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
nxp_c45_reconstruct_ts() takes a partial hardware timestamp in @hwts,
with 2 bits of the 'seconds' portion, and a full PTP time in @ts.
It patches in the lower bits of @hwts into @ts, and to ensure that the
reconstructed timestamp is correct, it checks whether the lower 2 bits
of @hwts are not in fact higher than the lower 2 bits of @ts. This is
not logically possible because, according to the calling convention, @ts
was collected later in time than @hwts, but due to two's complement
arithmetic it can actually happen, because the current PTP time might
have wrapped around between when @hwts was collected and when @ts was,
yielding the lower 2 bits of @ts smaller than those of @hwts.
To correct for that situation which is expected to happen under normal
conditions, the driver subtracts exactly one wraparound interval from
the reconstructed timestamp, since the upper bits of that need to
correspond to what the upper bits of @hwts were, not to what the upper
bits of @ts were.
Readers might be confused because the driver denotes the amount of bits
that the partial hardware timestamp has to offer as TS_SEC_MASK
(timestamp mask for seconds). But it subtracts a seemingly unrelated
BIT(2), which is in fact more subtle: if the hardware timestamp provides
2 bits of partial 'seconds' timestamp, then the wraparound interval is
2^2 == BIT(2).
But nonetheless, it is better to express the wraparound interval in
terms of a definition we already have, so replace BIT(2) with
1 + GENMASK(1, 0) which produces the same result but is clearer.
Suggested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The SJA1110 switch integrates these PHYs, and they do not have support
for timestamping. This message becomes quite overwhelming:
[ 10.056596] NXP C45 TJA1103 spi1.0-base-t1:01: the phy does not support PTP
[ 10.112625] NXP C45 TJA1103 spi1.0-base-t1:02: the phy does not support PTP
[ 10.167461] NXP C45 TJA1103 spi1.0-base-t1:03: the phy does not support PTP
[ 10.223510] NXP C45 TJA1103 spi1.0-base-t1:04: the phy does not support PTP
[ 10.278239] NXP C45 TJA1103 spi1.0-base-t1:05: the phy does not support PTP
[ 10.332663] NXP C45 TJA1103 spi1.0-base-t1:06: the phy does not support PTP
[ 15.390828] NXP C45 TJA1103 spi1.2-base-t1:01: the phy does not support PTP
[ 15.445224] NXP C45 TJA1103 spi1.2-base-t1:02: the phy does not support PTP
[ 15.499673] NXP C45 TJA1103 spi1.2-base-t1:03: the phy does not support PTP
[ 15.554074] NXP C45 TJA1103 spi1.2-base-t1:04: the phy does not support PTP
[ 15.608516] NXP C45 TJA1103 spi1.2-base-t1:05: the phy does not support PTP
[ 15.662996] NXP C45 TJA1103 spi1.2-base-t1:06: the phy does not support PTP
So reduce its log level to debug.
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
Zhou Yanjie says:
====================
Add Ingenic SoCs MAC support.
v2->v3:
1.Add "ingenic,mac.yaml" for Ingenic SoCs.
2.Change tx clk delay and rx clk delay from hardware value to ps.
3.return -EINVAL when a unsupported value is encountered when
parsing the binding.
4.Simplify the code of the RGMII part of X2000 SoC according to
Andrew Lunn’s suggestion.
5.Follow the example of "dwmac-mediatek.c" to improve the code
that handles delays according to Andrew Lunn’s suggestion.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for Ingenic SoC MAC glue layer support for the stmmac
device driver. This driver is used on for the MAC ethernet controller
found in the JZ4775 SoC, the X1000 SoC, the X1600 SoC, the X1830 SoC,
and the X2000 SoC.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add traps that have init_action being set to DROP.
Add 'trap_drop_counter_get' (devlink API) callback implementation,
that is used to get number of packets that have been dropped by the HW
(traps with action 'DROP').
Add new FW command CPU_CODE_COUNTERS_GET.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add devlink traps registration (with corresponding groups) for
all the traffic types that driver traps to the CPU;
prestera_rxtx: report each packet trapped to the CPU (RX) to the
prestera_devlink;
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Whenever query statistics is issued for trap with DROP action,
devlink subsystem would also fill-in statistics 'dropped' field.
In case if device driver did't register callback for hard drop
statistics querying, 'dropped' field will be omitted and not filled.
Add trap_drop_counter_get callback implementation to the netdevsim.
Add new test cases for netdevsim, to test both the callback
functionality, as well as drop statistics alteration check.
Signed-off-by: Oleksandr Mazur <oleksandr.mazur@plvision.eu>
Signed-off-by: David S. Miller <davem@davemloft.net>
Author forgot to remove that flag.
Fixes: f7af616c63 ("net: iosm: infrastructure")
Reported-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The 3rd argument is u32 by function definition while it is __be32
by function declaration.
Signed-off-by: Lijun Pan <lijunp213@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch support for cable test for the ksz886x switches and the
ksz8081 PHY.
The patch was tested on a KSZ8873RLL switch with following results:
- port 1:
- provides invalid values, thus return -ENOTSUPP
(Errata: DS80000830A: "LinkMD does not work on Port 1",
http://ww1.microchip.com/downloads/en/DeviceDoc/KSZ8873-Errata-DS80000830A.pdf)
- port 2:
- can detect distance
- can detect open on each wire of pair A (wire 1 and 2)
- can detect open only on one wire of pair B (only wire 3)
- can detect short between wires of a pair (wires 1 + 2 or 3 + 6)
- short between pairs is detected as open.
For example short between wires 2 + 3 is detected as open.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add mapping for LINK_MD register to enable cable testing functionality.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for MDI-X status and configuration
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for MDI-X status and configuration
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch changes the alignments to one space between "#define" and the
macro.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds the phylink support to the ksz8795 driver to provide
configuration exceptions on quirky KSZ8863 and KSZ8873 ports.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Some micrel devices share the same PHY register defines. This patch
moves them to one common header so other drivers can reuse them.
And reuse generic MII_* defines where possible.
Signed-off-by: Michael Grzeschik <m.grzeschik@pengutronix.de>
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
A recent change tidied up some conditional code, avoiding the use of
some #ifdefs. Unfortunately, if CONFIG_IPV6 was not enabled, it
meant that two functions were referenced but never defined.
The easiest fix is to just define stubs for these functions if
CONFIG_IPV6 is not defined. This will soon be simplified further
by some other development in the works...
Reported-by: kernel test robot <lkp@intel.com>
Fixes: 75db5b07f8 ("net: qualcomm: rmnet: eliminate some ifdefs")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The pointer of_node is being initialized with a value that is never
read and it is being updated later with a new value inside a do-while
loop. The initialization is redundant and can be removed and the
pointer dev is no longer required and can be removed too.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Current MCAM allocation scheme allocates a single lot of
MCAM entries for ntuple filters, unicast filters and VF VLAN
rules. This patch attempts to cleanup this logic by segregating
MCAM rule allocation and management for Ntuple rules and unicast,
VF VLAN rules. This segregation will result in reusing most of
the logic for supporting ntuple filters for VF devices.
Also added debug messages for MCAM entry allocation failures.
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Syzbot reported memory leak in tty_init_dev().
The problem was in unputted tty in ldisc_open()
static int ldisc_open(struct tty_struct *tty)
{
...
ser->tty = tty_kref_get(tty);
...
result = register_netdevice(dev);
if (result) {
rtnl_unlock();
free_netdev(dev);
return -ENODEV;
}
...
}
Ser pointer is netdev private_data, so after free_netdev()
this pointer goes away with unputted tty reference. So, fix
it by adding tty_kref_put() before freeing netdev.
Reported-and-tested-by: syzbot+f303e045423e617d2cad@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The TID returned during successful filter creation is relative to
the region in which the filter is created. Using it directly always
returns Hi Prio/Normal filter region's entry for the first couple of
entries, even though the rule is actually inserted in Hash region.
Fix by analyzing in which region the filter has been inserted and
save the absolute TID to be used for lookup later.
Fixes: db43b30cd8 ("cxgb4: add ethtool n-tuple filter deletion")
Signed-off-by: Rahul Lakkireddy <rahul.lakkireddy@chelsio.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: e87ad55393 ("netxen: support pci error handlers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
If an error occurs after a 'pci_enable_pcie_error_reporting()' call, it
must be undone by a corresponding 'pci_disable_pcie_error_reporting()'
call, as already done in the remove function.
Fixes: 451724c821 ("qlcnic: aer support")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The purpose of the loop using u64_stats_fetch_*_irq() is to ensure
statistics on a given CPU are collected atomically. If one of the
statistics values gets updated within the begin/retry window, the
loop will run again.
Currently the statistics totals are updated inside that window.
This means that if the loop ever retries, the statistics for the
CPU will be counted more than once.
Fix this by taking a snapshot of a CPU's statistics inside the
protected window, and then updating the counters with the snapshot
values after exiting the loop.
(Also add a newline at the end of this file...)
Fixes: 192c4b5d48 ("net: qualcomm: rmnet: Add support for 64 bit stats")
Signed-off-by: Alex Elder <elder@linaro.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
When reading the fw_log structure from the device's memory, we could
race with the firmware updating the actual_buff_size and buff_write_ptr
members of this structure. This would lead to bytes being dropped from
the log.
Fix this by writing back the actual - now fixed - clear_ptr which
reflects where we read up to in the buffer.
This also means that we must not check that the clear_ptr matches the
current write pointer, so remove that check.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/E1lolvi-0003Ri-39@rmk-PC.armlinux.org.uk
With logging enabled, it has been observed that the driver spews
messages such as:
wlcore: ERROR Calculate of clear addr Clear = 204025b0, write = 204015b0
The problem occurs because 204025b0 is the end of the buffer, and
204015b0 is the beginning, and the calculation for "clear"ing the
buffer does not take into account that if we read to the very end
of the ring buffer, we are actually at the beginning of the buffer.
Fix this.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/E1lolvc-0003RM-VE@rmk-PC.armlinux.org.uk
Make some of the fwlog calculations more obvious by calculating bits
that get used and documenting what they are. Validate the read pointer
while we're at it to ensure we do not overflow the data block we have
allocated and read.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/E1lolvX-0003R3-RE@rmk-PC.armlinux.org.uk
Tidy up the use of fw_log.actual_buff_size - rather than reading it
multiple times and applying the endian conversion, read it once into
actual_len and use that instead.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/E1lolvS-0003Ql-NJ@rmk-PC.armlinux.org.uk
At least on wl12xx, reading the MAC after boot can fail with a warning
at drivers/net/wireless/ti/wlcore/sdio.c:78 wl12xx_sdio_raw_read.
The failed call comes from wl12xx_get_mac() that wlcore_nvs_cb() calls
after request_firmware_work_func().
After the error, no wireless interface is created. Reloading the wl12xx
module makes the interface work.
Turns out the wlan controller can be in a low-power ELP state after the
boot from the bootloader or kexec, and needs to be woken up first.
Let's wake the hardware and add a sleep after that similar to
wl12xx_pre_boot() is already doing.
Note that a similar issue could exist for wl18xx, but I have not seen it
so far. And a search for wl18xx_get_mac and wl12xx_sdio_raw_read did not
produce similar errors.
Cc: Carl Philipp Klemm <philipp@uvos.xyz>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210603062814.19464-1-tony@atomide.com
Use DEVICE_ATTR_<RW|RO> helper instead of plain DEVICE_ATTR,
which makes the code a bit shorter and easier to read.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210523033538.25568-1-yuehaibing@huawei.com
Right now wcn->hal_buf is allocated in wcn36xx_start(). This is a problem
since we should have setup all of the buffers we required by the time
ieee80211_register_hw() is called.
struct ieee80211_ops callbacks may run prior to mac_start() and therefore
wcn->hal_buf must be initialized.
This is easily remediated by moving the allocation to probe() taking the
opportunity to tidy up freeing memory by using devm_kmalloc().
Fixes: 8e84c25821 ("wcn36xx: mac80211 driver for Qualcomm WCN3660/WCN3680 hardware")
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605173347.2266003-1-bryan.odonoghue@linaro.org
Enable flags for
- Magic packet
- GTK rekey
Previous patches implemented the necessary code to switch these two on.
Standalone magic packet absent GTK rekey is pretty useless, so it makes
sense to flag both at once.
Once done it is possible for wcn36xx firmware to
1. Respond to ipv4 and ipv6 ARP/NS lookup requests
2. Bring the system out of suspend when a magic packet is received.
Magic in our case is a simple ipv4 or ipv6 unicast.
3. GTK rekey whilst in suspend
Once we wake from suspend the GTK will be updated as necessary
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-13-bryan.odonoghue@linaro.org
This commit is the corresponding resume() path request to the firmware when
resuming. Unlike the suspend() version which is a unidirectional
indication, the resume version is a standard request/response.
Once the resume() request completes ipv4 ARP, ipv6 NS and GTK rekey offload
stop working and can subsequently be rolled back.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-12-bryan.odonoghue@linaro.org
In order to activate ipv4 ARP offload, ipv6 NS offload and firmware GTK
offload we need to send a unidirectional indication from host to wcn
indicating a transition to suspend.
Once done, firmware will respond to ARP broadcasts, ipv6 NS lookups and
perform GTK rekeys without waking the host.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-11-bryan.odonoghue@linaro.org
Having enabled GTK rekey in suspend, we need to extract the replay counter
from the firmware on resume and perform a ieee80211_gtk_rekey_notify() so
that the STA remains verified from the perspective of the AP.
In order to enable the SMD command and response we need to pack the
existing command/response structures. Given these structures are currently
unused, there's no need to backport this as a fix.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-10-bryan.odonoghue@linaro.org
Using previously set GTK KCK and KEK material this commit adds GTK rekeying
to the WoWLAN suspend/resume path. A small error in the packing of the
up to now unused command structure is fixed as we go.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-9-bryan.odonoghue@linaro.org
Add a callback for Group Temporal Key tracking as provided by the standard
WiFi ops structure.
We track the key to integrate GTK offloading into the WoWLAN suspend path
later on. Code comes from the Intel iwlwifi driver with minimal name
changes.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-8-bryan.odonoghue@linaro.org
We need to respond to ipv6 namespace lookups when in suspend. This patch
adds the necessary changes to issue the appropriate firmware command on
suspend and resume to enter/exit firmware offloaded ns lookup.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Reported-by: kernel test robot <lkp@intel.com>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-7-bryan.odonoghue@linaro.org
Taking code from iwlwifi this commit adds a standard callback for
ipv6_addr_change().
This callback allows wcn36xx to know the set of ipv6 addresses. Something
we need to know in order to get wowlan working with ipv6.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-6-bryan.odonoghue@linaro.org
Testing on Android reveals that the flush on both suspend and resume of the
firmware indication work-queue can stall indefinitely.
Given this code path doesn't appear to have been exercised up until now,
removing this flush to unblock this situation.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-5-bryan.odonoghue@linaro.org
Add ARP offload support. Firmware is capable of responding to ARP requests
for a single ipv4 address only.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-4-bryan.odonoghue@linaro.org
A subsequent set of patches will extend out suspend/resume support in this
driver, we cannot set the firmware up for multiple ipv4/ipv6 addresses and
as such we can't iterate through a list of ieee80211_vif.
Constrain the interaction with the firmware to the first ieee80211_vif on
the suspend/resume/wowlan path.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-3-bryan.odonoghue@linaro.org
wcn36xx_smd_set_power_params() can return an error. For the purposes of
entering into suspend we need the suspend() function to trap and report
errors up the stack.
First step in this process is reporting the existing result code for
wcn36xx_smd_set_power_params().
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Tested-by: Benjamin Li <benl@squareup.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210605011140.2004643-2-bryan.odonoghue@linaro.org
In hwsim_subscribe_all_others, the error handling code performs
incorrectly if the second hwsim_alloc_edge fails. When this issue occurs,
it goes to sub_fail, without cleaning the edges allocated before.
Fixes: f25da51fdc ("ieee802154: hwsim: add replacement for fakelb")
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Acked-by: Alexander Aring <aahringo@redhat.com>
Link: https://lore.kernel.org/r/20210611015812.1626999-1-mudongliangabcd@gmail.com
Signed-off-by: Stefan Schmidt <stefan@datenfreihafen.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into tty-next
We want the tty fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into driver-core-next
We need the driver core fix in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iQFSBAABCAA8FiEEq68RxlopcLEwq+PEeb4+QwBBGIYFAmDGe+4eHHRvcnZhbGRz
QGxpbnV4LWZvdW5kYXRpb24ub3JnAAoJEHm+PkMAQRiG/IUH/iyHVulAtAhL9bnR
qL4M1kWfcG1sKS2TzGRZzo6YiUABf89vFP90r4sKxG3AKrb8YkTwmJr8B/sWwcsv
PpKkXXTobbDfpSrsXGEapBkQOE7h2w739XeXyBLRPkoCR4UrEFn68TV2rLjMLBPS
/EIZkonXLWzzWalgKDP4wSJ7GaQxi3LMx3dGAvbFArEGZ1mPHNlgWy2VokFY/yBf
qh1EZ5rugysc78JCpTqfTf3fUPK2idQW5gtHSMbyESrWwJ/3XXL9o1ET3JWURYf1
b0FgVztzddwgULoIGWLxDH5WWts3l54sjBLj0yrLUlnGKA5FjrZb12g9PdhdywuY
/8KfjeE=
=JfJm
-----END PGP SIGNATURE-----
Merge tag 'v5.13-rc6' into char-misc-next
We need the fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
