We've had all the necessary changes ready for both shmem and hugetlbfs.
Turn on all the shmem/hugetlbfs switches for userfaultfd-wp.
We can expand UFFD_API_RANGE_IOCTLS_BASIC with _UFFDIO_WRITEPROTECT too
because all existing types now support write protection mode.
Since vma_can_userfault() will be used elsewhere, move into userfaultfd_k.h.
Link: https://lkml.kernel.org/r/20220405014926.15101-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Firstly, we'll need to pass in dst_vma into copy_hugetlb_page_range()
because for uffd-wp it's the dst vma that matters on deciding how we
should treat uffd-wp protected ptes.
We should recognize pte markers during fork and do the pte copy if needed.
[lkp@intel.com: vma_needs_copy can be static]
Link: https://lkml.kernel.org/r/Ylb0CGeFJlc4EzLk@7ec4ff11d4ae
Link: https://lkml.kernel.org/r/20220405014918.14932-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As with shmem uffd-wp special ptes, only drop the uffd-wp special swap pte
if unmapping an entire vma or synchronized such that faults can not race
with the unmap operation. This requires passing zap_flags all the way to
the lowest level hugetlb unmap routine: __unmap_hugepage_range.
In general, unmap calls originated in hugetlbfs code will pass the
ZAP_FLAG_DROP_MARKER flag as synchronization is in place to prevent
faults. The exception is hole punch which will first unmap without any
synchronization. Later when hole punch actually removes the page from the
file, it will check to see if there was a subsequent fault and if so take
the hugetlb fault mutex while unmapping again. This second unmap will
pass in ZAP_FLAG_DROP_MARKER.
The justification of "whether to apply ZAP_FLAG_DROP_MARKER flag when
unmap a hugetlb range" is (IMHO): we should never reach a state when a
page fault could errornously fault in a page-cache page that was
wr-protected to be writable, even in an extremely short period. That
could happen if e.g. we pass ZAP_FLAG_DROP_MARKER when
hugetlbfs_punch_hole() calls hugetlb_vmdelete_list(), because if a page
faults after that call and before remove_inode_hugepages() is executed,
the page cache can be mapped writable again in the small racy window, that
can cause unexpected data overwritten.
[peterx@redhat.com: fix sparse warning]
Link: https://lkml.kernel.org/r/Ylcdw8I1L5iAoWhb@xz-m1.local
[akpm@linux-foundation.org: move zap_flags_t from mm.h to mm_types.h to fix build issues]
Link: https://lkml.kernel.org/r/20220405014915.14873-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This starts from passing cp_flags into hugetlb_change_protection() so
hugetlb will be able to handle MM_CP_UFFD_WP[_RESOLVE] requests.
huge_pte_clear_uffd_wp() is introduced to handle the case where the
UFFDIO_WRITEPROTECT is requested upon migrating huge page entries.
Link: https://lkml.kernel.org/r/20220405014906.14708-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass the wp_copy variable into hugetlb_mcopy_atomic_pte() thoughout the
stack. Apply the UFFD_WP bit if UFFDIO_COPY_MODE_WP is with UFFDIO_COPY.
Hugetlb pages are only managed by hugetlbfs, so we're safe even without
setting dirty bit in the huge pte if the page is installed as read-only.
However we'd better still keep the dirty bit set for a read-only
UFFDIO_COPY pte (when UFFDIO_COPY_MODE_WP bit is set), not only to match
what we do with shmem, but also because the page does contain dirty data
that the kernel just copied from the userspace.
Link: https://lkml.kernel.org/r/20220405014904.14643-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
File-backed memory is prone to being unmapped at any time. It means all
information in the pte will be dropped, including the uffd-wp flag.
To persist the uffd-wp flag, we'll use the pte markers. This patch
teaches the zap code to understand uffd-wp and know when to keep or drop
the uffd-wp bit.
Add a new flag ZAP_FLAG_DROP_MARKER and set it in zap_details when we
don't want to persist such an information, for example, when destroying
the whole vma, or punching a hole in a shmem file. For the rest cases we
should never drop the uffd-wp bit, or the wr-protect information will get
lost.
The new ZAP_FLAG_DROP_MARKER needs to be put into mm.h rather than
memory.c because it'll be further referenced in hugetlb files later.
Link: https://lkml.kernel.org/r/20220405014847.14295-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
File-backed memories are prone to unmap/swap so the ptes are always
unstable, because they can be easily faulted back later using the page
cache. This could lead to uffd-wp getting lost when unmapping or swapping
out such memory. One example is shmem. PTE markers are needed to store
those information.
This patch prepares it by handling uffd-wp pte markers first it is applied
elsewhere, so that the page fault handler can recognize uffd-wp pte
markers.
The handling of uffd-wp pte markers is similar to missing fault, it's just
that we'll handle this "missing fault" when we see the pte markers,
meanwhile we need to make sure the marker information is kept during
processing the fault.
This is a slow path of uffd-wp handling, because zapping of wr-protected
shmem ptes should be rare. So far it should only trigger in two
conditions:
(1) When trying to punch holes in shmem_fallocate(), there is an
optimization to zap the pgtables before evicting the page.
(2) When swapping out shmem pages.
Because of this, the page fault handling is simplifed too by not sending
the wr-protect message in the 1st page fault, instead the page will be
installed read-only, so the uffd-wp message will be generated in the next
fault, which will trigger the do_wp_page() path of general uffd-wp
handling.
Disable fault-around for all uffd-wp registered ranges for extra safety
just like uffd-minor fault, and clean the code up.
Link: https://lkml.kernel.org/r/20220405014844.14239-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Pass wp_copy into shmem_mfill_atomic_pte() through the stack, then apply
the UFFD_WP bit properly when the UFFDIO_COPY on shmem is with
UFFDIO_COPY_MODE_WP. wp_copy lands mfill_atomic_install_pte() finally.
Note: we must do pte_wrprotect() if !writable in
mfill_atomic_install_pte(), as mk_pte() could return a writable pte (e.g.,
when VM_SHARED on a shmem file).
Link: https://lkml.kernel.org/r/20220405014841.14185-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch introduces the 1st user of pte marker: the uffd-wp marker.
When the pte marker is installed with the uffd-wp bit set, it means this
pte was wr-protected by uffd.
We will use this special pte to arm the ptes that got either unmapped or
swapped out for a file-backed region that was previously wr-protected.
This special pte could trigger a page fault just like swap entries.
This idea is greatly inspired by Hugh and Andrea in the discussion, which
is referenced in the links below.
Some helpers are introduced to detect whether a swap pte is uffd
wr-protected. After the pte marker introduced, one swap pte can be
wr-protected in two forms: either it is a normal swap pte and it has
_PAGE_SWP_UFFD_WP set, or it's a pte marker that has PTE_MARKER_UFFD_WP
set.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/YkzKiM8tI4+qOfXF@xz-m1.local
Link: https://lore.kernel.org/lkml/20201126222359.8120-1-peterx@redhat.com/
Link: https://lore.kernel.org/lkml/20201130230603.46187-1-peterx@redhat.com/
Link: https://lkml.kernel.org/r/20220405014838.14131-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Suggested-by: Andrea Arcangeli <aarcange@redhat.com>
Suggested-by: Hugh Dickins <hughd@google.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This patch allows do_fault() to trigger on !pte_none() cases too. This
prepares for the pte markers to be handled by do_fault() just like none
pte.
To achieve this, instead of unconditionally check against pte_none() in
finish_fault(), we may hit the case that the orig_pte was some pte marker
so what we want to do is to replace the pte marker with some valid pte
entry. Then if orig_pte was set we'd want to check the current *pte
(under pgtable lock) against orig_pte rather than none pte.
Right now there's no solid way to safely reference orig_pte because when
pmd is not allocated handle_pte_fault() will not initialize orig_pte, so
it's not safe to reference it.
There's another solution proposed before this patch to do pte_clear() for
vmf->orig_pte for pmd==NULL case, however it turns out it'll break arm32
because arm32 could have assumption that pte_t* pointer will always reside
on a real ram32 pgtable, not any kernel stack variable.
To solve this, we add a new flag FAULT_FLAG_ORIG_PTE_VALID, and it'll be
set along with orig_pte when there is valid orig_pte, or it'll be cleared
when orig_pte was not initialized.
It'll be updated every time we call handle_pte_fault(), so e.g. if a page
fault retry happened it'll be properly updated along with orig_pte.
[1] https://lore.kernel.org/lkml/710c48c9-406d-e4c5-a394-10501b951316@samsung.com/
[akpm@linux-foundation.org: coding-style cleanups]
[peterx@redhat.com: fix crash reported by Marek]
Link: https://lkml.kernel.org/r/Ylb9rXJyPm8/ao8f@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014836.14077-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Alistair Popple <apopple@nvidia.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "userfaultfd-wp: Support shmem and hugetlbfs", v8.
Overview
========
Userfaultfd-wp anonymous support was merged two years ago. There're quite
a few applications that started to leverage this capability either to take
snapshots for user-app memory, or use it for full user controled swapping.
This series tries to complete the feature for uffd-wp so as to cover all
the RAM-based memory types. So far uffd-wp is the only missing piece of
the rest features (uffd-missing & uffd-minor mode).
One major reason to do so is that anonymous pages are sometimes not
satisfying the need of applications, and there're growing users of either
shmem and hugetlbfs for either sharing purpose (e.g., sharing guest mem
between hypervisor process and device emulation process, shmem local live
migration for upgrades), or for performance on tlb hits.
All these mean that if a uffd-wp app wants to switch to any of the memory
types, it'll stop working. I think it's worthwhile to have the kernel to
cover all these aspects.
This series chose to protect pages in pte level not page level.
One major reason is safety. I have no idea how we could make it safe if
any of the uffd-privileged app can wr-protect a page that any other
application can use. It means this app can block any process potentially
for any time it wants.
The other reason is that it aligns very well with not only the anonymous
uffd-wp solution, but also uffd as a whole. For example, userfaultfd is
implemented fundamentally based on VMAs. We set flags to VMAs showing the
status of uffd tracking. For another per-page based protection solution,
it'll be crossing the fundation line on VMA-based, and it could simply be
too far away already from what's called userfaultfd.
PTE markers
===========
The patchset is based on the idea called PTE markers. It was discussed in
one of the mm alignment sessions, proposed starting from v6, and this is
the 2nd version of it using PTE marker idea.
PTE marker is a new type of swap entry that is ony applicable to file
backed memories like shmem and hugetlbfs. It's used to persist some
pte-level information even if the original present ptes in pgtable are
zapped.
Logically pte markers can store more than uffd-wp information, but so far
only one bit is used for uffd-wp purpose. When the pte marker is
installed with uffd-wp bit set, it means this pte is wr-protected by uffd.
It solves the problem on e.g. file-backed memory mapped ptes got zapped
due to any reason (e.g. thp split, or swapped out), we can still keep the
wr-protect information in the ptes. Then when the page fault triggers
again, we'll know this pte is wr-protected so we can treat the pte the
same as a normal uffd wr-protected pte.
The extra information is encoded into the swap entry, or swp_offset to be
explicit, with the swp_type being PTE_MARKER. So far uffd-wp only uses
one bit out of the swap entry, the rest bits of swp_offset are still
reserved for other purposes.
There're two configs to enable/disable PTE markers:
CONFIG_PTE_MARKER
CONFIG_PTE_MARKER_UFFD_WP
We can set !PTE_MARKER to completely disable all the PTE markers, along
with uffd-wp support. I made two config so we can also enable PTE marker
but disable uffd-wp file-backed for other purposes. At the end of current
series, I'll enable CONFIG_PTE_MARKER by default, but that patch is
standalone and if anyone worries about having it by default, we can also
consider turn it off by dropping that oneliner patch. So far I don't see
a huge risk of doing so, so I kept that patch.
In most cases, PTE markers should be treated as none ptes. It is because
that unlike most of the other swap entry types, there's no PFN or block
offset information encoded into PTE markers but some extra well-defined
bits showing the status of the pte. These bits should only be used as
extra data when servicing an upcoming page fault, and then we behave as if
it's a none pte.
I did spend a lot of time observing all the pte_none() users this time.
It is indeed a challenge because there're a lot, and I hope I didn't miss
a single of them when we should take care of pte markers. Luckily, I
don't think it'll need to be considered in many cases, for example: boot
code, arch code (especially non-x86), kernel-only page handlings (e.g.
CPA), or device driver codes when we're tackling with pure PFN mappings.
I introduced pte_none_mostly() in this series when we need to handle pte
markers the same as none pte, the "mostly" is the other way to write
"either none pte or a pte marker".
I didn't replace pte_none() to cover pte markers for below reasons:
- Very rare case of pte_none() callers will handle pte markers. E.g., all
the kernel pages do not require knowledge of pte markers. So we don't
pollute the major use cases.
- Unconditionally change pte_none() semantics could confuse people, because
pte_none() existed for so long a time.
- Unconditionally change pte_none() semantics could make pte_none() slower
even if in many cases pte markers do not exist.
- There're cases where we'd like to handle pte markers differntly from
pte_none(), so a full replace is also impossible. E.g. khugepaged should
still treat pte markers as normal swap ptes rather than none ptes, because
pte markers will always need a fault-in to merge the marker with a valid
pte. Or the smap code will need to parse PTE markers not none ptes.
Patch Layout
============
Introducing PTE marker and uffd-wp bit in PTE marker:
mm: Introduce PTE_MARKER swap entry
mm: Teach core mm about pte markers
mm: Check against orig_pte for finish_fault()
mm/uffd: PTE_MARKER_UFFD_WP
Adding support for shmem uffd-wp:
mm/shmem: Take care of UFFDIO_COPY_MODE_WP
mm/shmem: Handle uffd-wp special pte in page fault handler
mm/shmem: Persist uffd-wp bit across zapping for file-backed
mm/shmem: Allow uffd wr-protect none pte for file-backed mem
mm/shmem: Allows file-back mem to be uffd wr-protected on thps
mm/shmem: Handle uffd-wp during fork()
Adding support for hugetlbfs uffd-wp:
mm/hugetlb: Introduce huge pte version of uffd-wp helpers
mm/hugetlb: Hook page faults for uffd write protection
mm/hugetlb: Take care of UFFDIO_COPY_MODE_WP
mm/hugetlb: Handle UFFDIO_WRITEPROTECT
mm/hugetlb: Handle pte markers in page faults
mm/hugetlb: Allow uffd wr-protect none ptes
mm/hugetlb: Only drop uffd-wp special pte if required
mm/hugetlb: Handle uffd-wp during fork()
Misc handling on the rest mm for uffd-wp file-backed:
mm/khugepaged: Don't recycle vma pgtable if uffd-wp registered
mm/pagemap: Recognize uffd-wp bit for shmem/hugetlbfs
Enabling of uffd-wp on file-backed memory:
mm/uffd: Enable write protection for shmem & hugetlbfs
mm: Enable PTE markers by default
selftests/uffd: Enable uffd-wp for shmem/hugetlbfs
Tests
=====
- Compile test on x86_64 and aarch64 on different configs
- Kernel selftests
- uffd-test [0]
- Umapsort [1,2] test for shmem/hugetlb, with swap on/off
[0] https://github.com/xzpeter/clibs/tree/master/uffd-test
[1] https://github.com/xzpeter/umap-apps/tree/peter
[2] https://github.com/xzpeter/umap/tree/peter-shmem-hugetlbfs
This patch (of 23):
Introduces a new swap entry type called PTE_MARKER. It can be installed
for any pte that maps a file-backed memory when the pte is temporarily
zapped, so as to maintain per-pte information.
The information that kept in the pte is called a "marker". Here we define
the marker as "unsigned long" just to match pgoff_t, however it will only
work if it still fits in swp_offset(), which is e.g. currently 58 bits on
x86_64.
A new config CONFIG_PTE_MARKER is introduced too; it's by default off. A
bunch of helpers are defined altogether to service the rest of the pte
marker code.
[peterx@redhat.com: fixup]
Link: https://lkml.kernel.org/r/Yk2rdB7SXZf+2BDF@xz-m1.local
Link: https://lkml.kernel.org/r/20220405014646.13522-1-peterx@redhat.com
Link: https://lkml.kernel.org/r/20220405014646.13522-2-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Nadav Amit <nadav.amit@gmail.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: "Kirill A . Shutemov" <kirill@shutemov.name>
Cc: Hugh Dickins <hughd@google.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: Mike Rapoport <rppt@linux.vnet.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
This commit moves 'damon_set_regions()' from vaddr to core, as it is aimed
to be used by not only 'vaddr' but also other parts of DAMON.
Link: https://lkml.kernel.org/r/20220429160606.127307-5-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: Support online tuning".
Effects of DAMON and DAMON-based Operation Schemes highly depends on the
configurations. Wrong configurations could even result in unexpected
efficiency degradations. For finding a best configuration, repeating
incremental configuration changes and results measurements, in other
words, online tuning, could be helpful.
Nevertheless, DAMON kernel API supports only restrictive online tuning.
Worse yet, the sysfs-based DAMON user interface doesn't support online
tuning at all. DAMON_RECLAIM also doesn't support online tuning.
This patchset makes the DAMON kernel API, DAMON sysfs interface, and
DAMON_RECLAIM supports online tuning.
Sequence of patches
-------------------
First two patches enhance DAMON online tuning for kernel API users.
Specifically, patch 1 let kernel API users to be able to do DAMON online
tuning without a restriction, and patch 2 makes error handling easier.
Following seven patches (patches 3-9) refactor code for better readability
and easier reuse of code fragments that will be useful for online tuning
support.
Patch 10 introduces DAMON callback based user request handling structure
for DAMON sysfs interface, and patch 11 enables DAMON online tuning via
DAMON sysfs interface. Documentation patch (patch 12) for usage of it
follows.
Patch 13 enables online tuning of DAMON_RECLAIM and finally patch 14
documents the DAMON_RECLAIM online tuning usage.
This patch (of 14):
For updating input parameters for running DAMON contexts, DAMON kernel API
users can use the contexts' callbacks, as it is the safe place for context
internal data accesses. When the context has DAMON-based operation
schemes and all schemes are deactivated due to their watermarks, however,
DAMON does nothing but only watermarks checks. As a result, no callbacks
will be called back, and therefore the kernel API users cannot update the
input parameters including monitoring attributes, DAMON-based operation
schemes, and watermarks.
To let users easily update such DAMON input parameters in such a case,
this commit adds a new callback, 'after_wmarks_check()'. It will be
called after each watermarks check. Users can do the online input
parameters update in the callback even under the schemes deactivated case.
Link: https://lkml.kernel.org/r/20220429160606.127307-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
A pmd migration entry should first be a swap pmd,so use is_swap_pmd(pmd)
instead of !pmd_present(pmd).
On the other hand, some architecture (MIPS for example) may misjudge a
pmd_none entry as a pmd migration entry.
Link: https://lkml.kernel.org/r/1651131333-6386-1-git-send-email-zhanghongchen@loongson.cn
Signed-off-by: Hongchen Zhang <zhanghongchen@loongson.cn>
Acked-by: Peter Xu <peterx@redhat.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Naoya Horiguchi <naoya.horiguchi@nec.com>
Cc: Hugh Dickins <hughd@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
When CONFIG_KASAN_HW_TAGS is enabled we currently increase the minimum
slab alignment to 16. This happens even if MTE is not supported in
hardware or disabled via kasan=off, which creates an unnecessary memory
overhead in those cases. Eliminate this overhead by making the minimum
slab alignment a runtime property and only aligning to 16 if KASAN is
enabled at runtime.
On a DragonBoard 845c (non-MTE hardware) with a kernel built with
CONFIG_KASAN_HW_TAGS, waiting for quiescence after a full Android boot I
see the following Slab measurements in /proc/meminfo (median of 3
reboots):
Before: 169020 kB
After: 167304 kB
[akpm@linux-foundation.org: make slab alignment type `unsigned int' to avoid casting]
Link: https://linux-review.googlesource.com/id/I752e725179b43b144153f4b6f584ceb646473ead
Link: https://lkml.kernel.org/r/20220427195820.1716975-2-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Andrey Konovalov <andreyknvl@gmail.com>
Reviewed-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Tested-by: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Acked-by: David Rientjes <rientjes@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
An inclusion of cache.h in printk.h was added in 2014 in commit
c28aa1f0a8 ("printk/cache: mark printk_once test variable
__read_mostly") in order to bring in the definition of __read_mostly. The
usage of __read_mostly was later removed in commit 3ec25826ae ("printk:
Tie printk_once / printk_deferred_once into .data.once for reset") which
made the inclusion of cache.h unnecessary, so remove it.
We have a small amount of code that depended on the inclusion of cache.h
from printk.h; fix that code to include the appropriate header.
This fixes a circular inclusion on arm64 (linux/printk.h -> linux/cache.h
-> asm/cache.h -> linux/kasan-enabled.h -> linux/static_key.h ->
linux/jump_label.h -> linux/bug.h -> asm/bug.h -> linux/printk.h) that
would otherwise be introduced by the next patch.
Build tested using {allyesconfig,defconfig} x {arm64,x86_64}.
Link: https://linux-review.googlesource.com/id/I8fd51f72c9ef1f2d6afd3b2cbc875aa4792c1fba
Link: https://lkml.kernel.org/r/20220427195820.1716975-1-pcc@google.com
Signed-off-by: Peter Collingbourne <pcc@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: Andrey Ryabinin <ryabinin.a.a@gmail.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Cc: Hyeonggon Yoo <42.hyeyoo@gmail.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Roman Gushchin <roman.gushchin@linux.dev>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "support fixed virtual address ranges monitoring".
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overhead
or distractions.
This patchset adds supports for the use case on DAMON's kernel API
(DAMON_OPS_FVADDR) and sysfs interface ('fvaddr' keyword for 'operations'
sysfs file).
This patch (of 3):
The monitoring operations set for virtual address spaces automatically
updates the monitoring target regions to cover entire mappings of the
virtual address spaces as much as possible. Some users could have more
information about their programs than kernel and therefore have interest
in not entire regions but only specific regions. For such cases, the
automatic monitoring target regions updates are only unnecessary overheads
or distractions.
For such cases, DAMON's API users can simply set the '->init()' and
'->update()' of the DAMON context's '->ops' NULL, and set the target
monitoring regions when creating the context. But, that would be a dirty
hack. Worse yet, the hack is unavailable for DAMON user space interface
users.
To support the use case in a clean way that can easily exported to the
user space, this commit adds another monitoring operations set called
'fvaddr', which is same to 'vaddr' but does not automatically update the
monitoring regions. Instead, it will only respect the virtual address
regions which have explicitly passed at the initial context creation.
Note that this commit leave sysfs interface not supporting the feature
yet. The support will be made in a following commit.
Link: https://lkml.kernel.org/r/20220426231750.48822-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426231750.48822-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/damon: allow users know which monitoring ops are available".
DAMON users can configure it for vaious address spaces including virtual
address spaces and the physical address space by setting its monitoring
operations set with appropriate one for their purpose. However, there is
no celan and simple way to know exactly which monitoring operations sets
are available on the currently running kernel.
This patchset adds functions for the purpose on DAMON's kernel API
('damon_is_registered_ops()') and sysfs interface ('avail_operations' file
under each context directory).
This patch (of 4):
To know if a specific 'damon_operations' is registered, users need to
check the kernel config or try 'damon_select_ops()' with the ops of the
question, and then see if it successes. In the latter case, the user
should also revert the change. To make the process simple and convenient,
this commit adds a function for checking if a specific 'damon_operations'
is registered or not.
Link: https://lkml.kernel.org/r/20220426203843.45238-1-sj@kernel.org
Link: https://lkml.kernel.org/r/20220426203843.45238-2-sj@kernel.org
Signed-off-by: SeongJae Park <sj@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Add VM_BUG_ON() bounds checking to make sure that, if "offset + len>
PAGE_SIZE", memset() does not corrupt data in adjacent pages.
Mainly to match all the similar functions in highmem.h.
Link: https://lkml.kernel.org/r/20220426193020.8710-1-fmdefrancesco@gmail.com
Signed-off-by: Fabio M. De Francesco <fmdefrancesco@gmail.com>
Reviewed-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Cc: Peter Collingbourne <pcc@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Calls to change_protection_range() on THP can trigger, at least on x86,
two TLB flushes for one page: one immediately, when pmdp_invalidate() is
called by change_huge_pmd(), and then another one later (that can be
batched) when change_protection_range() finishes.
The first TLB flush is only necessary to prevent the dirty bit (and with a
lesser importance the access bit) from changing while the PTE is modified.
However, this is not necessary as the x86 CPUs set the dirty-bit
atomically with an additional check that the PTE is (still) present. One
caveat is Intel's Knights Landing that has a bug and does not do so.
Leverage this behavior to eliminate the unnecessary TLB flush in
change_huge_pmd(). Introduce a new arch specific pmdp_invalidate_ad()
that only invalidates the access and dirty bit from further changes.
Link: https://lkml.kernel.org/r/20220401180821.1986781-4-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Patch series "mm/mprotect: avoid unnecessary TLB flushes", v6.
This patchset is intended to remove unnecessary TLB flushes during
mprotect() syscalls. Once this patch-set make it through, similar and
further optimizations for MADV_COLD and userfaultfd would be possible.
Basically, there are 3 optimizations in this patch-set:
1. Use TLB batching infrastructure to batch flushes across VMAs and do
better/fewer flushes. This would also be handy for later userfaultfd
enhancements.
2. Avoid unnecessary TLB flushes. This optimization is the one that
provides most of the performance benefits. Unlike previous versions,
we now only avoid flushes that would not result in spurious
page-faults.
3. Avoiding TLB flushes on change_huge_pmd() that are only needed to
prevent the A/D bits from changing.
Andrew asked for some benchmark numbers. I do not have an easy
determinate macrobenchmark in which it is easy to show benefit. I
therefore ran a microbenchmark: a loop that does the following on
anonymous memory, just as a sanity check to see that time is saved by
avoiding TLB flushes. The loop goes:
mprotect(p, PAGE_SIZE, PROT_READ)
mprotect(p, PAGE_SIZE, PROT_READ|PROT_WRITE)
*p = 0; // make the page writable
The test was run in KVM guest with 1 or 2 threads (the second thread was
busy-looping). I measured the time (cycles) of each operation:
1 thread 2 threads
mmots +patch mmots +patch
PROT_READ 3494 2725 (-22%) 8630 7788 (-10%)
PROT_READ|WRITE 3952 2724 (-31%) 9075 2865 (-68%)
[ mmots = v5.17-rc6-mmots-2022-03-06-20-38 ]
The exact numbers are really meaningless, but the benefit is clear. There
are 2 interesting results though.
(1) PROT_READ is cheaper, while one can expect it not to be affected.
This is presumably due to TLB miss that is saved
(2) Without memory access (*p = 0), the speedup of the patch is even
greater. In that scenario mprotect(PROT_READ) also avoids the TLB flush.
As a result both operations on the patched kernel take roughly ~1500
cycles (with either 1 or 2 threads), whereas on mmotm their cost is as
high as presented in the table.
This patch (of 3):
change_pXX_range() currently does not use mmu_gather, but instead
implements its own deferred TLB flushes scheme. This both complicates the
code, as developers need to be aware of different invalidation schemes,
and prevents opportunities to avoid TLB flushes or perform them in finer
granularity.
The use of mmu_gather for modified PTEs has benefits in various scenarios
even if pages are not released. For instance, if only a single page needs
to be flushed out of a range of many pages, only that page would be
flushed. If a THP page is flushed, on x86 a single TLB invlpg instruction
can be used instead of 512 instructions (or a full TLB flush, which would
Linux would actually use by default). mprotect() over multiple VMAs
requires a single flush.
Use mmu_gather in change_pXX_range(). As the pages are not released, only
record the flushed range using tlb_flush_pXX_range().
Handle THP similarly and get rid of flush_cache_range() which becomes
redundant since tlb_start_vma() calls it when needed.
Link: https://lkml.kernel.org/r/20220401180821.1986781-1-namit@vmware.com
Link: https://lkml.kernel.org/r/20220401180821.1986781-2-namit@vmware.com
Signed-off-by: Nadav Amit <namit@vmware.com>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Andrew Cooper <andrew.cooper3@citrix.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Peter Xu <peterx@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Will Deacon <will@kernel.org>
Cc: Yu Zhao <yuzhao@google.com>
Cc: Nick Piggin <npiggin@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
As domain->force_snooping only impacts the devices attached with the
domain, there's no need to check against all IOMMU units. On the other
hand, force_snooping could be set on a domain no matter whether it has
been attached or not, and once set it is an immutable flag. If no
device attached, the operation always succeeds. Then this empty domain
can be only attached to a device of which the IOMMU supports snoop
control.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220508123525.1973626-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-7-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
PRQ overflow may cause I/O throughput congestion, resulting in unnecessary
degradation of I/O performance. Appropriately increasing the length of PRQ
can greatly reduce the occurrence of PRQ overflow. The count of maximum
page requests that can be generated in parallel by a PCIe device is
statically defined in the Outstanding Page Request Capacity field of the
PCIe ATS configure space.
The new length of PRQ is calculated by summing up the value of Outstanding
Page Request Capacity register across all devices where Page Requests are
supported on the real PR-capable platform (Intel Sapphire Rapids). The
result is round to the nearest higher power of 2.
The PRQ length is also double sized as the VT-d IOMMU driver only updates
the Page Request Queue Head Register (PQH_REG) after processing the entire
queue.
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Link: https://lore.kernel.org/r/20220421113558.3504874-1-baolu.lu@linux.intel.com
Link: https://lore.kernel.org/r/20220510023407.2759143-5-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Adds h264 lat and core architecture driver for mt8192,
and the decode mode is frame based for stateless decoder.
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Tested-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Drivers that want to remove registered conflicting framebuffers prior to
register their own framebuffer, call to remove_conflicting_framebuffers().
This function takes the registration_lock mutex, to prevent a race when
drivers register framebuffer devices. But if a conflicting framebuffer
device is found, the underlaying platform device is unregistered and this
will lead to the platform driver .remove callback to be called. Which in
turn will call to unregister_framebuffer() that takes the same lock.
To prevent this, a struct fb_info.forced_out field was used as indication
to unregister_framebuffer() whether the mutex has to be grabbed or not.
But this could be unsafe, since the fbdev core is making assumptions about
what drivers may or may not do in their .remove callbacks. Allowing to run
these callbacks with the registration_lock held can cause deadlocks, since
the fbdev core has no control over what drivers do in their removal path.
A better solution is to drop the lock before platform_device_unregister(),
so unregister_framebuffer() can take it when called from the fbdev driver.
The lock is acquired again after the device has been unregistered and at
this point the removal loop can be restarted.
Since the conflicting framebuffer device has already been removed, the
loop would just finish when no more conflicting framebuffers are found.
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20220511113039.1252432-1-javierm@redhat.com
The extcon_get_extcon_dev() function returns error pointers on error,
NULL when it's a -EPROBE_DEFER defer situation, and ERR_PTR(-ENODEV)
when the CONFIG_EXTCON option is disabled. This is very complicated for
the callers to handle and a number of them had bugs that would lead to
an Oops.
In real life, there are two things which prevented crashes. First,
error pointers would only be returned if there was bug in the caller
where they passed a NULL "extcon_name" and none of them do that.
Second, only two out of the eight drivers will build when CONFIG_EXTCON
is disabled.
The normal way to write this would be to return -EPROBE_DEFER directly
when appropriate and return NULL when CONFIG_EXTCON is disabled. Then
the error handling is simple and just looks like:
dev->edev = extcon_get_extcon_dev(acpi_dev_name(adev));
if (IS_ERR(dev->edev))
return PTR_ERR(dev->edev);
For the two drivers which can build with CONFIG_EXTCON disabled, then
extcon_get_extcon_dev() will now return NULL which is not treated as an
error and the probe will continue successfully. Those two drivers are
"typec_fusb302" and "max8997-battery". In the original code, the
typec_fusb302 driver had an 800ms hang in tcpm_get_current_limit() but
now that function is a no-op. For the max8997-battery driver everything
should continue working as is.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Acked-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Only a few fixes this time, and some debuggability improvements.
-----BEGIN PGP SIGNATURE-----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=3II/
-----END PGP SIGNATURE-----
Merge tag 'drm/tegra/for-5.19-rc1' of https://gitlab.freedesktop.org/drm/tegra into drm-next
drm/tegra: Changes for v5.19-rc1
Only a few fixes this time, and some debuggability improvements.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thierry Reding <thierry.reding@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20220506164004.3922226-1-thierry.reding@gmail.com
Very few drivers actually have Kconfig knobs for adding
-DDEBUG. 8 according to a quick grep, while there are
93 users of skb_checksum_none_assert(). Switch to the
new DEBUG_NET_WARN_ON_ONCE() to catch bad skbs.
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://lore.kernel.org/r/20220511172305.1382810-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
and bluetooth. No outstanding fires.
Current release - regressions:
- eth: atlantic: always deep reset on pm op, fix null-deref
Current release - new code bugs:
- rds: use maybe_get_net() when acquiring refcount on TCP sockets
[refinement of a previous fix]
- eth: ocelot: mark traps with a bool instead of guessing type based
on list membership
Previous releases - regressions:
- net: fix skipping features in for_each_netdev_feature()
- phy: micrel: fix null-derefs on suspend/resume and probe
- bcmgenet: check for Wake-on-LAN interrupt probe deferral
Previous releases - always broken:
- ipv4: drop dst in multicast routing path, prevent leaks
- ping: fix address binding wrt vrf
- net: fix wrong network header length when BPF protocol translation
is used on skbs with a fraglist
- bluetooth: fix the creation of hdev->name
- rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=jt7U
-----END PGP SIGNATURE-----
Merge tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless, and bluetooth.
No outstanding fires.
Current release - regressions:
- eth: atlantic: always deep reset on pm op, fix null-deref
Current release - new code bugs:
- rds: use maybe_get_net() when acquiring refcount on TCP sockets
[refinement of a previous fix]
- eth: ocelot: mark traps with a bool instead of guessing type based
on list membership
Previous releases - regressions:
- net: fix skipping features in for_each_netdev_feature()
- phy: micrel: fix null-derefs on suspend/resume and probe
- bcmgenet: check for Wake-on-LAN interrupt probe deferral
Previous releases - always broken:
- ipv4: drop dst in multicast routing path, prevent leaks
- ping: fix address binding wrt vrf
- net: fix wrong network header length when BPF protocol translation
is used on skbs with a fraglist
- bluetooth: fix the creation of hdev->name
- rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
- wifi: iwlwifi: iwl-dbg: use del_timer_sync() before freeing
- wifi: ath11k: reduce the wait time of 11d scan and hw scan while
adding an interface
- mac80211: fix rx reordering with non explicit / psmp ack policy
- mac80211: reset MBSSID parameters upon connection
- nl80211: fix races in nl80211_set_tx_bitrate_mask()
- tls: fix context leak on tls_device_down
- sched: act_pedit: really ensure the skb is writable
- batman-adv: don't skb_split skbuffs with frag_list
- eth: ocelot: fix various issues with TC actions (null-deref; bad
stats; ineffective drops; ineffective filter removal)"
* tag 'net-5.18-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (61 commits)
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
mlxsw: Avoid warning during ip6gre device removal
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
net: phy: micrel: Fix incorrect variable type in micrel
decnet: Use container_of() for struct dn_neigh casts
...
In commit ca321ec743 ("module.h: allow #define strings to work with
MODULE_IMPORT_NS") I fixed up the MODULE_IMPORT_NS() macro to allow
defined strings to work with it. Unfortunatly I did it in a two-stage
process, when it could just be done with the __stringify() macro as
pointed out by Masahiro Yamada.
Clean this up to only be one macro instead of two steps to achieve the
same end result.
Fixes: ca321ec743 ("module.h: allow #define strings to work with MODULE_IMPORT_NS")
Reported-by: Masahiro Yamada <masahiroy@kernel.org>
Cc: Luis Chamberlain <mcgrof@kernel.org>
Cc: Jessica Yu <jeyu@kernel.org>
Cc: Matthias Maennich <maennich@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Don't hand-initialize the struct here, create a macro to initialize it
so new fields added don't get forgotten in places.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
There was a "type" element added to this structure, but some static
values were missed. The default value will be zero, which is correct,
but create an initializer for the type and initialize the type properly
in the initializer to avoid future issues.
Reported-by: Joe Wiese <jwiese@rackspace.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Hardware core level testing features require near simultaneous execution
of WRMSR instructions on all threads of a core to initiate a test.
Provide a customized cut down version of stop_machine_cpuslocked() that
just operates on the threads of a single core.
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20220506225410.1652287-4-tony.luck@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Commit ef295ecf09 modified the Linux kernel such that the bottom bits
of the bi_opf member contain the operation instead of the topmost bits.
That commit did not update the comment next to bi_opf. Hence this patch.
From commit ef295ecf09:
-#define bio_op(bio) ((bio)->bi_opf >> BIO_OP_SHIFT)
+#define bio_op(bio) ((bio)->bi_opf & REQ_OP_MASK)
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: ef295ecf09 ("block: better op and flags encoding")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220511235152.1082246-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Keep the op-specific flag last so that they are clearly separate from
the generic flags. Various recent commits just kept adding new flags
at the end.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220512061408.1826595-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
It has been observed with certain PCIe USB cards (like Inateck connected
to AM64 EVM or J7200 EVM) that as soon as the primary roothub is
registered, port status change is handled even before xHC is running
leading to cold plug USB devices not detected. For such cases, registering
both the root hubs along with the second HCD is required. Add support for
deferring roothub registration in usb_add_hcd(), so that both primary and
secondary roothubs are registered along with the second HCD.
This patch has been added and reverted earier as it triggered a race
in usb device enumeration.
That race is now fixed in 5.16-rc3, and in stable back to 5.4
commit 6cca13de26 ("usb: hub: Fix locking issues with address0_mutex")
commit 6ae6dc22d2 ("usb: hub: Fix usb enumeration issue due to address0
race")
CC: stable@vger.kernel.org # 5.4+
Suggested-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Chris Chiu <chris.chiu@canonical.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Link: https://lore.kernel.org/r/20220510091630.16564-2-kishon@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As we continue to narrow the scope of what the FORTIFY memcpy() will
accept and build alternative APIs that give the compiler appropriate
visibility into more complex memcpy scenarios, there is a need for
"unfortified" memcpy use in rare cases where combinations of compiler
behaviors, source code layout, etc, result in cases where the stricter
memcpy checks need to be bypassed until appropriate solutions can be
developed (i.e. fix compiler bugs, code refactoring, new API, etc). The
intention is for this to be used only if there's no other reasonable
solution, for its use to include a justification that can be used
to assess future solutions, and for it to be temporary.
Example usage included, based on analysis and discussion from:
https://lore.kernel.org/netdev/CANn89iLS_2cshtuXPyNUGDPaic=sJiYfvTb_wNLgWrZRyBxZ_g@mail.gmail.com
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Eric Dumazet <edumazet@google.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Paolo Abeni <pabeni@redhat.com>
Cc: Coco Li <lixiaoyan@google.com>
Cc: Tariq Toukan <tariqt@nvidia.com>
Cc: Saeed Mahameed <saeedm@nvidia.com>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: netdev@vger.kernel.org
Cc: linux-hardening@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220511025301.3636666-1-keescook@chromium.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add new ebpf helpers bpf_map_lookup_percpu_elem.
The implementation method is relatively simple, refer to the implementation
method of map_lookup_elem of percpu map, increase the parameters of cpu, and
obtain it according to the specified cpu.
Signed-off-by: Feng Zhou <zhoufeng.zf@bytedance.com>
Link: https://lore.kernel.org/r/20220511093854.411-2-zhoufeng.zf@bytedance.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Kernel Test Robot complained about missing static storage class
annotation for bpf_kptr_xchg_proto variable.
sparse: symbol 'bpf_kptr_xchg_proto' was not declared. Should it be static?
This caused by missing extern definition in the header. Add it to
suppress the sparse warning.
Fixes: c0a5a21c25 ("bpf: Allow storing referenced kptr in map")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/r/20220511194654.765705-2-memxor@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Currently ptrace_stop() / do_signal_stop() rely on the special states
TASK_TRACED and TASK_STOPPED resp. to keep unique state. That is, this
state exists only in task->__state and nowhere else.
There's two spots of bother with this:
- PREEMPT_RT has task->saved_state which complicates matters,
meaning task_is_{traced,stopped}() needs to check an additional
variable.
- An alternative freezer implementation that itself relies on a
special TASK state would loose TASK_TRACED/TASK_STOPPED and will
result in misbehaviour.
As such, add additional state to task->jobctl to track this state
outside of task->__state.
NOTE: this doesn't actually fix anything yet, just adds extra state.
--EWB
* didn't add a unnecessary newline in signal.h
* Update t->jobctl in signal_wake_up and ptrace_signal_wake_up
instead of in signal_wake_up_state. This prevents the clearing
of TASK_STOPPED and TASK_TRACED from getting lost.
* Added warnings if JOBCTL_STOPPED or JOBCTL_TRACED are not cleared
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220421150654.757693825@infradead.org
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-12-ebiederm@xmission.com
Signed-off-by: Eric W. Biederman <ebiederm@xmission.com>
Stop playing with tsk->__state to remove TASK_WAKEKILL while a ptrace
command is executing.
Instead remove TASK_WAKEKILL from the definition of TASK_TRACED, and
implement a new jobctl flag TASK_PTRACE_FROZEN. This new flag is set
in jobctl_freeze_task and cleared when ptrace_stop is awoken or in
jobctl_unfreeze_task (when ptrace_stop remains asleep).
In signal_wake_up add __TASK_TRACED to state along with TASK_WAKEKILL
when the wake up is for a fatal signal. Skip adding __TASK_TRACED
when TASK_PTRACE_FROZEN is not set. This has the same effect as
changing TASK_TRACED to __TASK_TRACED as all of the wake_ups that use
TASK_KILLABLE go through signal_wake_up.
Handle a ptrace_stop being called with a pending fatal signal.
Previously it would have been handled by schedule simply failing to
sleep. As TASK_WAKEKILL is no longer part of TASK_TRACED schedule
will sleep with a fatal_signal_pending. The code in signal_wake_up
guarantees that the code will be awaked by any fatal signal that
codes after TASK_TRACED is set.
Previously the __state value of __TASK_TRACED was changed to
TASK_RUNNING when woken up or back to TASK_TRACED when the code was
left in ptrace_stop. Now when woken up ptrace_stop now clears
JOBCTL_PTRACE_FROZEN and when left sleeping ptrace_unfreezed_traced
clears JOBCTL_PTRACE_FROZEN.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-10-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
xtensa is the last user of the PT_SINGLESTEP flag. Changing tsk->ptrace in
user_enable_single_step and user_disable_single_step without locking could
potentiallly cause problems.
So use a thread info flag instead of a flag in tsk->ptrace. Use TIF_SINGLESTEP
that xtensa already had defined but unused.
Remove the definitions of PT_SINGLESTEP and PT_BLOCKSTEP as they have no more users.
Cc: stable@vger.kernel.org
Acked-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-4-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
User mode linux is the last user of the PT_DTRACE flag. Using the flag to indicate
single stepping is a little confusing and worse changing tsk->ptrace without locking
could potentionally cause problems.
So use a thread info flag with a better name instead of flag in tsk->ptrace.
Remove the definition PT_DTRACE as uml is the last user.
Cc: stable@vger.kernel.org
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-3-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The function __group_send_sig_info is just a light wrapper around
send_signal_locked with one parameter fixed to a constant value. As
the wrapper adds no real value update the code to directly call the
wrapped function.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-2-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
Rename send_signal and __send_signal to send_signal_locked and
__send_signal_locked to make send_signal usable outside of
signal.c.
Tested-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Oleg Nesterov <oleg@redhat.com>
Link: https://lkml.kernel.org/r/20220505182645.497868-1-ebiederm@xmission.com
Signed-off-by: "Eric W. Biederman" <ebiederm@xmission.com>
The last user of this function is in PCI callbacks that want to convert
their struct pci_dev to a vfio_device. Instead of searching use the
vfio_device available trivially through the drvdata.
When a callback in the device_driver is called, the caller must hold the
device_lock() on dev. The purpose of the device_lock is to prevent
remove() from being called (see __device_release_driver), and allow the
driver to safely interact with its drvdata without races.
The PCI core correctly follows this and holds the device_lock() when
calling error_detected (see report_error_detected) and
sriov_configure (see sriov_numvfs_store).
Further, since the drvdata holds a positive refcount on the vfio_device
any access of the drvdata, under the device_lock(), from a driver callback
needs no further protection or refcounting.
Thus the remark in the vfio_device_get_from_dev() comment does not apply
here, VFIO PCI drivers all call vfio_unregister_group_dev() from their
remove callbacks under the device_lock() and cannot race with the
remaining callers.
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Shameer Kolothum <shameerali.kolothum.thodi@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/2-v4-c841817a0349+8f-vfio_get_from_dev_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Now that callers have been updated to use the vfio_device APIs the driver
facing group interface is no longer used, delete it:
- vfio_group_get_external_user_from_dev()
- vfio_group_pin_pages()
- vfio_group_unpin_pages()
- vfio_group_iommu_domain()
--
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Link: https://lore.kernel.org/r/6-v4-8045e76bf00b+13d-vfio_mdev_no_group_jgg@nvidia.com
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
