A pin controlled by the iomuxc-snvs pin controller must be
specified under the dtb's iomuxc-snvs node.
Move the one and only pin of that category from the iomuxc node
and set the pinctrl-0 using it accordingly.
Fixes: 2aa9d62019 ("ARM: dts: imx6ull-colibri: add touchscreen device nodes")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The Mitsubishi AA1024XD12 panel can be used for R-Car Gen2 and Gen3
boards as an optional external panel. It is described in the
arm/boot/dts/r8a77xx-aa104xd12-panel.dtsi file as a direct child of the
DT root node. This allows including r8a77xx-aa104xd12-panel.dtsi in
board device trees, with other minor modifications, to enable the panel.
This is however not how external components should be modelled. Instead
of modifying the board device tree to enable the panel, it should be
compiled as a DT overlay, to be loaded by the boot loader.
Prepare the r8a77xx-aa104xd12-panel.dtsi file for this usage by
declaring a panel node only, without hardcoding its path. Overlay
sources can then include r8a77xx-aa104xd12-panel.dtsi where appropriate.
This change doesn't cause any regression as r8a77xx-aa104xd12-panel.dtsi
is currently unused. As overlay support for this panel has only been
tested with Gen3 hardware, and Gen2 support will require more
development, move the file to arch/arm64/boot/dts/renesas/.
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Link: https://lore.kernel.org/r/20211229193135.28767-2-laurent.pinchart+renesas@ideasonboard.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Disable DSI and DSI PHY devices by default. The only actual user,
Nexus 7, already contains `status = "okay"` property in the respective
devices nodes.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-5-dmitry.baryshkov@linaro.org
Follow the usual scheme and use name 'iface' rather than 'iface_clk' for
the interface clock. The DSI PHY driver can cope with both of them, so
there is no breakage.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220706145412.1566011-4-dmitry.baryshkov@linaro.org
First device specific compatible, then general one.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220626183247.142776-1-david@ixit.cz
It contains:
- compilation warning fixes for SAMA5D2
- updates for all AT91 device tree to use generic name for reset
controller
- reset controller node for SAMA7G5
- MCAN1 and UDPHS nodes for LAN966 SoCs
- Flexcom3 bindings were updated for lan966x-pcb8291.dts board to cope
with reality
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQTsZ8eserC1pmhwqDmejrg/N2X7/QUCYsPyogAKCRCejrg/N2X7
/Uq7AQCAKfITIfmP9EY0JGuhJqBNNGckbCEkFLbixz6uj5TFNAEAxoJmmcL5cj9m
wUczRNYOD8wW7R1GoLOsHF95pwJvhgI=
=rxjU
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=182f
-----END PGP SIGNATURE-----
Merge tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into arm/dt
AT91 DT for v5.20
It contains:
- compilation warning fixes for SAMA5D2
- updates for all AT91 device tree to use generic name for reset
controller
- reset controller node for SAMA7G5
- MCAN1 and UDPHS nodes for LAN966 SoCs
- Flexcom3 bindings were updated for lan966x-pcb8291.dts board to cope
with reality
* tag 'at91-dt-5.20' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: lan966x: Add UDPHS support
dt-bindings: usb: atmel: Add Microchip LAN9662 compatible string
ARM: dts: lan966x: Cleanup flexcom3 usart pinctrl settings.
ARM: dts: lan966x: Add mcan1 node.
ARM: dts: at91: sama7g5: add reset-controller node
ARM: dts: at91: use generic name for reset controller
ARM: dts: at91: sama5d2: fix compilation warning
ARM: dts: at91: sama5d2: fix compilation warning
Link: https://lore.kernel.org/r/20220705084637.818216-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For the trip points, I used values from the BSP code.
The critical trip point value is 30°C above the maximum recommended
ambient temperature (85°C) for the SoC from the datasheet, so there's
some headroom even at such a high ambient temperature.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-4-qianfanguijin@163.com
OPP table value is get from allwinner lichee linux-3.10 kernel driver
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-3-qianfanguijin@163.com
The CPU of sun8i-r40 is powered by PMIC, let's add "cpu-supply" node.
Signed-off-by: qianfan Zhao <qianfanguijin@163.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Tested-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220517013607.2252-2-qianfanguijin@163.com
Add DT bindings for ST MIPID02 and DCMI to Avenger96 base DT.
Both the ST MIPID02 and DCMI are disabled by default, as the
AV96 camera module is optional.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for RCC pin, this is used on AV96 board
for e.g. sensor clock supply.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for DCMI pins, this is used on AV96 board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Cc: Patrice Chotard <patrice.chotard@foss.st.com>
Cc: Patrick Delaunay <patrick.delaunay@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add DT for DH DRC Compact unit, which is a universal controller device.
The system has two ethernet ports, one CAN, RS485 and RS232, USB, uSD
card slot, eMMC and SDIO Wi-Fi.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART5 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART4 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for UART3 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for SPI2 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add another mux option for CAN1 pins, this is used on DRC Compact board.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Those pin comments refer to SPI2 pins, not SPI1 pins, update the comments.
No functional change.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Add UDPHS (the USB High Speed Device Port controller) support.
The both lan966x SOCs (LAN9662 and LAN9668) have the same UDPHS
IP. This IP is also the same as the one present in the SAMA5D3
SOC.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20220704102845.168438-4-herve.codina@bootlin.com
Enables Reset and Clocks Controller on STM32MP13
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
According to the OSD32MP1 Power System overview[1] the EEPROM is connected to
the VDD line and not to some single-purpose fixed regulator.
Set the EEPROM supply according to the diagram to eliminate this parent-less
regulator.
[1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Acked-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
According to the OSD32MP1 Power System overview[1] ldo3's input is always
internally connected to vdd_ddr.
[1]: https://octavosystems.com/app_notes/osd32mp1-power-system-overview/#connections
Signed-off-by: Leonard Göhrs <l.goehrs@pengutronix.de>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fix whitespace coding style: use single space instead of tabs or
multiple spaces around '=' sign in property assignment. No functional
changes (same DTB).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The Buck3 on DHCOR is used to supply IO voltage. It can output either 3V3
in the default DHCOR configuration, or 2V9 in case of AV96 DHCOR variant
which has extra Empirion DCDC converter in front of the 1V8 IO supply, or
outright 1V8 in case of 1V8 IO DHCOR without the Empirion DCDC converter.
The 2V9 mode in case of AV96 DHCOR variant is used to reduce unnecessarily
high input voltage to the Empirion DCDC converter, so move it into matching
DTSI to stop confusing users.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Cc: linux-stm32@st-md-mailman.stormreply.com
To: linux-arm-kernel@lists.infradead.org
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The stm32 ipcc mailbox driver supports only two interrupts (rx and tx), so
remove the unsupported "wakeup" one.
Note that the EXTI interrupt 61 has two roles : it is hierarchically linked
to the GIC IPCC "rx" interrupt, and it acts as a wakeup source.
Signed-off-by: Fabien Dessenne <fabien.dessenne@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
This adds an appropriate SFP node for Trust Architecture 2.1 devices.
Signed-off-by: Sean Anderson <sean.anderson@seco.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The USBH composed of EHCI and OHCI controllers needs the PHY clock to be
initialized first, before enabling (gating) them. The reverse is also
required when going to suspend.
So, add USBPHY clock as 1st entry in both controllers, so the USBPHY PLL
gets enabled 1st upon controller init. Upon suspend/resume, this also makes
the clock to be disabled/re-enabled in the correct order.
This fixes some IRQ storm conditions seen when going to low-power, due to
PHY PLL being disabled before all clocks are cleanly gated.
Fixes: 949a0c0dec ("ARM: dts: stm32: add USB Host (USBH) support to stm32mp157c")
Fixes: db7be2cb87 ("ARM: dts: stm32: use usbphyc ck_usbo_48m as USBH OHCI clock on stm32mp151")
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Delete the node fixed clock managed by secure world with SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
LSE clock is provided by SCMI.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
The peripheral clock of CEC is not LSE but CEC.
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Fixes stm32mp15*-scmi DTS files introduced in [1] to also access PWR
regulators through SCMI service. This is needed since enabling secure
only access to RCC clock and reset controllers also enables secure
access only on PWR voltage regulators reg11, reg18 and usb33 hence
these must also be accessed through SCMI Voltage Domain protocol.
This change applies on commit [2] that already corrects issues from
commit [1].
Cc: Alexandre Torgue <alexandre.torgue@foss.st.com>
Link: [1] https://lore.kernel.org/linux-arm-kernel/20220422150952.20587-7-alexandre.torgue@foss.st.com
Link: [2] https://lore.kernel.org/linux-arm-kernel/20220613071920.5463-1-alexandre.torgue@foss.st.com
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
