A number of places in the fscache interface used nfs_inode when inode could
be used, simplifying the code.
Signed-off-by: Dave Wysochanski <dwysocha@redhat.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
In the presence of trunking transports, it's helpful to make sure
that during the migration event, the GETATTR for fs_location attribute
happens on the main transport.
Signed-off-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
[You don't often get email from khoroshilov@ispras.ru. Learn why this is important at http://aka.ms/LearnAboutSenderIdentification.]
Overflow check in not needed anymore after we switch to kmalloc_array().
Signed-off-by: Alexey Khoroshilov <khoroshilov@ispras.ru>
Fixes: a4f743a6bb ("NFSv4.1: Convert open-coded array allocation calls to kmalloc_array()")
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Allow the user space application to create and release an rpmsg device
by adding RPMSG_CREATE_DEV_IOCTL and RPMSG_RELEASE_DEV_IOCTL ioctrls to
the /dev/rpmsg_ctrl interface
The RPMSG_CREATE_DEV_IOCTL Ioctl can be used to instantiate a local rpmsg
device.
Depending on the back-end implementation, the associated rpmsg driver is
probed and a NS announcement can be sent to the remote processor.
The RPMSG_RELEASE_DEV_IOCTL allows the user application to release a
rpmsg device created either by the remote processor or with the
RPMSG_CREATE_DEV_IOCTL call.
Depending on the back-end implementation, the associated rpmsg driver is
removed and a NS destroy rpmsg can be sent to the remote processor.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-12-arnaud.pouliquen@foss.st.com
For the rpmsg virtio backend, the current implementation of the rpmsg char
only allows to instantiate static(i.e. prefixed source and destination
addresses) end points, and only on the Linux user space initiative.
This patch defines the "rpmsg-raw" channel and registers it to the rpmsg bus.
This registration allows:
- To create the channel at the initiative of the remote processor
relying on the name service announcement mechanism. In other words the
/dev/rpmsgX interface is instantiate by the remote processor.
- To use the channel object instead of the endpoint, thus preventing the
user space from having the knowledge of the remote processor's
endpoint addresses.
- To rely on udev to be inform when a /dev/rpmsgX is created on remote
processor request, indicating that the remote processor is ready to
communicate.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-11-arnaud.pouliquen@foss.st.com
Current implementation create/destroy a new endpoint on each
rpmsg_eptdev_open/rpmsg_eptdev_release calls.
For a rpmsg device created by the NS announcement a default endpoint is created.
In this case we have to reuse the default rpmsg device endpoint associated to
the channel instead of creating a new one.
This patch prepares the introduction of a rpmsg channel device for the
char device. The rpmsg channel device will require a default endpoint to
communicate to the remote processor.
Add the default_ept field in rpmsg_eptdev structure.This pointer
determines the behavior on rpmsg_eptdev_open and rpmsg_eptdev_release call.
- If default_ept == NULL:
Use the legacy behavior by creating a new endpoint each time
rpmsg_eptdev_open is called and release it when rpmsg_eptdev_release
is called on /dev/rpmsgX device open/close.
- If default_ept is set:
use the rpmsg device default endpoint for the communication.
Add protection in rpmsg_eptdev_ioctl to prevent to destroy a default endpoint.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-10-arnaud.pouliquen@foss.st.com
Introduce the rpmsg_chrdev_eptdev_alloc and rpmsg_chrdev_eptdev_add
internal function to split the allocation part from the device add.
This patch prepares the introduction of a rpmsg channel device for the
char device. An default endpoint will be created,
referenced in the rpmsg_eptdev structure before adding the devices.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-9-arnaud.pouliquen@foss.st.com
The rpmsg_chrdev driver has been replaced by the rpmsg_ctrl driver
for the /dev/rpmsg_ctrlX devices management. The reference for the
driver override is now the rpmsg_ctrl.
Update the rpmsg_chrdev_register_device function to reflect the update,
and rename the function to use the rpmsg_ctrldev prefix.
The platform drivers are updated accordingly.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-8-arnaud.pouliquen@foss.st.com
Create the rpmsg_ctrl.c module and move the code related to the
rpmsg_ctrldev device in this new module.
Add the dependency between rpmsg_char and rpmsg_ctrl in the
kconfig file:
1) RPMSG_CTRL can set as module or built-in if
RPMSG=y || RPMSG_CHAR=y || RPMSG_CHAR=n
2) RPMSG_CTRL can not be set as built-in if
RPMSG=m || RPMSG_CHAR=m
Note that RPMGH_CHAR and RPMSG_CTRL can be activated separately.
Therefore, the RPMSG_CTRL configuration must be set for backwards compatibility.
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-4-arnaud.pouliquen@foss.st.com
Migrate the creation of the rpmsg class from the rpmsg_char
to the core that the class is usable by the rpmsg_char and
the future rpmsg_ctrl module.
Suggested-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-3-arnaud.pouliquen@foss.st.com
To prepare the split of the code related to the control (ctrldev)
and the endpoint (eptdev) devices in 2 separate files:
- Rename and export the functions in rpmsg_char.h.
- Suppress the dependency with the rpmsg_ctrldev struct in the
rpmsg_eptdev_create function.
Suggested-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Signed-off-by: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220124102524.295783-2-arnaud.pouliquen@foss.st.com
rpmsg_trysend() returns -ENOMEM when no rpmsg buffer can be allocated.
this causes write to fail with this error as opposed to -EAGAIN.
this is what user space applications (and libraries like boost.asio)
would expect when using normal character devices.
Signed-off-by: Tim Blechmann <tim@klingt.org>
Cc: Arnaud Pouliquen <arnaud.pouliquen@foss.st.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220313024541.1579848-2-tim@klingt.org
-----BEGIN PGP SIGNATURE-----
iQFHBAABCgAxFiEEBsvAIBsPu6mG7thcrX5LkNig010FAmItr80THG1rbEBwZW5n
dXRyb25peC5kZQAKCRCtfkuQ2KDTXQpCCACrBZRT0hqiKueoXPDTWkQPWtYHJPgE
Ho1/sA89eqtTmlYHRFRX8KA4LQjCnxlvTRQdqzIZHnokvm+ymvODDrUZcjVpUfbQ
W16oejtOqs7y87Uk2u16MAhkXf0KZzeO4exdkNGpgR+WrQ/4b7ZTXSf9esZYaope
E1AZ/puNxpHynZQgBzdyZ1c/PUiIDSArnFKQ1RIARQhW7O+svgxvypLjBZ6L3IUM
O0kXhk5M8m3yb+0ogVi8erzlne4rkjQM5DtM9egfBqRh1mqNK54XbA4SbZdxLytW
cTb/RP+Mx4/slJCrsIEj5FmFMCe5YOWlq18uN/TENwKRVzsxGOpzku8V
=fhK4
-----END PGP SIGNATURE-----
Merge tag 'linux-can-next-for-5.18-20220313' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
linux-can-next-for-5.18-20220313
Marc Kleine-Budde says:
====================
pull-request: can-next 2022-03-13
this is a pull request of 13 patches for net-next/master.
The 1st patch is by me and fixes the freeing of a skb in the vxcan
driver (initially added in this net-next window).
The remaining 12 patches are also by me and target the mcp251xfd
driver. The first patch fixes a printf modifier (initially added in
this net-next window). The remaining patches add ethtool based ring
and RX/TX IRQ coalescing support to the driver.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds TX IRQ coalescing support to the driver.
The implemented algorithm is similar to the RX IRQ coalescing support
added in the previous patch.
Link: https://lore.kernel.org/20220313083640.501791-11-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds RX IRQ coalescing support to the driver.
The mcp251xfd chip doesn't support proper hardware based coalescing,
so this patch tries to implemented it in software. The RX-FIFO offers
a "FIFO not empty" interrupt, which is used if no coalescing is
active.
With activated RX IRQ coalescing the "FIFO not empty" interrupt is
disabled in the RX IRQ handler and the "FIFO half full" or "FIFO full
interrupt" (depending on RX max coalesced frames IRQ) is used instead.
To avoid RX CAN frame starvation a hrtimer is setup with RX coalesce
usecs IRQ,on timer expiration the "FIFO not empty" is enabled again.
Support for ethtool configuration is added in the next patch.
Link: https://lore.kernel.org/20220313083640.501791-9-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
So far the configuration of the hardware FIFOs is hard coded and
depend only on the selected CAN mode (CAN-2.0 or CAN-FD).
This patch updates the macros describing the ring, FIFO and RAM layout
to prepare for the next patches that add support for runtime
configurable ring parameters via ethtool.
Link: https://lore.kernel.org/20220313083640.501791-7-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch prepares the driver for runtime configurable RX and TX ring
parameters. The actual runtime config support will be added in the
next patch.
Link: https://lore.kernel.org/20220313083640.501791-6-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch adds a helper function to calculate the ring configuration
of the controller based on various constraints, like available RAM,
size of RX and TX objects, CAN-mode, number of FIFOs and FIFO depth.
Link: https://lore.kernel.org/20220313083640.501791-3-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
In case of an erroneous ring configuration more RAM than available
might be used. Change the printf modifier to a signed int to properly
print this erroneous value.
Fixes: 83daa863f1 ("can: mcp251xfd: ring: update FIFO setup debug info")
Link: https://lore.kernel.org/20220313083640.501791-2-mkl@pengutronix.de
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
This patch fixes the freeing of the "oskb", by using kfree_skb()
instead of kfree().
Fixes: 1574481bb3 ("vxcan: remove sk reference in peer skb")
Link: https://lore.kernel.org/all/20220311123741.382618-1-mkl@pengutronix.de
Cc: Oliver Hartkopp <socketcan@hartkopp.net>
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
As we change the C language standard for the kernel from gnu89 to
gnu11, it makes sense to also update the version for user space
compilation.
Some users have older native compilers than what they use for
kernel builds, so I considered using gnu99 as the default version
for wider compatibility with gcc-4.6 and earlier.
However, testing with older compilers showed that we already require
HOSTCC version 5.1 as well because a lot of host tools include
linux/compiler.h that uses __has_attribute():
CC tools/objtool/exec-cmd.o
In file included from tools/include/linux/compiler_types.h:36:0,
from tools/include/linux/compiler.h:5,
from exec-cmd.c:2:
tools/include/linux/compiler-gcc.h:19:5: error: "__has_attribute" is not defined [-Werror=undef]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
During a patch discussion, Linus brought up the option of changing
the C standard version from gnu89 to gnu99, which allows using variable
declaration inside of a for() loop. While the C99, C11 and later standards
introduce many other features, most of these are already available in
gnu89 as GNU extensions as well.
An earlier attempt to do this when gcc-5 started defaulting to
-std=gnu11 failed because at the time that caused warnings about
designated initializers with older compilers. Now that gcc-5.1 is
the minimum compiler version used for building kernels, that is no
longer a concern. Similarly, the behavior of 'inline' functions changes
between gnu89 using gnu_inline behavior and gnu11 using standard c99+
behavior, but this was taken care of by defining 'inline' to include
__attribute__((gnu_inline)) in order to allow building with clang a
while ago.
Nathan Chancellor reported a new -Wdeclaration-after-statement
warning that appears in a system header on arm, this still needs a
workaround.
The differences between gnu99, gnu11, gnu1x and gnu17 are fairly
minimal and mainly impact warnings at the -Wpedantic level that the
kernel never enables. Between these, gnu11 is the newest version
that is supported by all supported compiler versions, though it is
only the default on gcc-5, while all other supported versions of
gcc or clang default to gnu1x/gnu17.
Link: https://lore.kernel.org/lkml/CAHk-=wiyCH7xeHcmiFJ-YgXUy2Jaj7pnkdKpcovt8fYbVFW3TA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1603
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: David Sterba <dsterba@suse.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
the use of additional C11 features such as for-loop initial declarations.
One contentious aspect of C99 is that it permits mixed declarations and
code, and for now at least, it seems preferable to enforce that
declarations must come first.
These warnings were already enabled in the kernel itself, but not
for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
a separate set of CFLAGS.
This patch fixes an existing violation in modpost.c, which is not
reported because of the missing flag in KBUILD_USERCFLAGS:
| scripts/mod/modpost.c: In function ‘match’:
| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
| 837 | const char *endp = p + strlen(p) - 1;
| | ^~~~~
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[arnd: don't add a duplicate flag to the default set, update changelog]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As a preparation for moving to -std=gnu11, turn off the
-Wshift-negative-value option. This warning is enabled by gcc when
building with -Wextra for c99 or higher, but not for c89. Since
the kernel already relies on well-defined overflow behavior,
the warning is not helpful and can simply be disabled in
all locations that use -Wextra.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Rather than waiting a full second in an interruptable waiter before
trying to generate entropy, try to generate entropy first and wait
second. While waiting one second might give an extra second for getting
entropy from elsewhere, we're already pretty late in the init process
here, and whatever else is generating entropy will still continue to
contribute. This has implications on signal handling: we call
try_to_generate_entropy() from wait_for_random_bytes(), and
wait_for_random_bytes() always uses wait_event_interruptible_timeout()
when waiting, since it's called by userspace code in restartable
contexts, where signals can pend. Since try_to_generate_entropy() now
runs first, if a signal is pending, it's necessary for
try_to_generate_entropy() to check for signals, since it won't hit the
wait until after try_to_generate_entropy() has returned. And even before
this change, when entering a busy loop in try_to_generate_entropy(), we
should have been checking to see if any signals are pending, so that a
process doesn't get stuck in that loop longer than expected.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
In order to chip away at the "premature first" problem, we augment our
existing entropy accounting with more frequent reseedings at boot.
The idea is that at boot, we're getting entropy from various places, and
we're not very sure which of early boot entropy is good and which isn't.
Even when we're crediting the entropy, we're still not totally certain
that it's any good. Since boot is the one time (aside from a compromise)
that we have zero entropy, it's important that we shepherd entropy into
the crng fairly often.
At the same time, we don't want a "premature next" problem, whereby an
attacker can brute force individual bits of added entropy. In lieu of
going full-on Fortuna (for now), we can pick a simpler strategy of just
reseeding more often during the first 5 minutes after boot. This is
still bounded by the 256-bit entropy credit requirement, so we'll skip a
reseeding if we haven't reached that, but in case entropy /is/ coming
in, this ensures that it makes its way into the crng rather rapidly
during these early stages.
Ordinarily we reseed if the previous reseeding is 300 seconds old. This
commit changes things so that for the first 600 seconds of boot time, we
reseed if the previous reseeding is uptime / 2 seconds old. That means
that we'll reseed at the very least double the uptime of the previous
reseeding.
Cc: Theodore Ts'o <tytso@mit.edu>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
This just puts trace_ext4_fc_commit_start(sb) & ktime_get()
for measuring FC commit time, after the check of whether sb
supports JOURNAL_FAST_COMMIT or not.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/d53cf3e535924ec0a1eb41a560e96561b0727e7a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
ftrace's __print_symbolic() requires that any enum values used in the
symbol to string translation table be wrapped in a TRACE_DEFINE_ENUM
so that the enum value can be decoded from the ftrace ring buffer by
user space tooling.
This patch also fixes few other problems found in this trace point.
e.g. dereferencing structures in TP_printk which should not be done
at any cost.
Also to avoid checkpatch warnings, this patch removes those
whitespaces/tab stops issues.
Cc: stable@kernel.org
Fixes: aa75f4d3da ("ext4: main fast-commit commit path")
Reported-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/b4b9691414c35c62e570b723e661c80674169f9a.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Below commit removed all references of EXT4_FC_COMMIT_FAILED.
commit 0915e464cb ("ext4: simplify updating of fast commit stats")
Just remove it since it is not used anymore.
Signed-off-by: Ritesh Harjani <riteshh@linux.ibm.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Harshad Shirwadkar <harshadshirwadkar@gmail.com>
Link: https://lore.kernel.org/r/c941357e476be07a1138c7319ca5faab7fb80fc6.1647057583.git.riteshh@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Recently I've got a report of BUG_ON trigerring during transaction
commit in ext4_journalled_writepage_callback() because we've spotted a
dirty page without buffers. Add WARN_ON_ONCE to
ext4_journalled_set_page_dirty() to catch the problematic condition
earlier where we have better chance of understanding which code path is
creating dirty data without preparing the page properly. Also update the
comment with current information when we are at it.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220310101832.5645-1-jack@suse.cz
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
After moving to the new mount API, mb_optimize_scan mount option
handling was not working as expected due to the parsed value always
being overwritten by default. Refactor and fix this to the expected
behavior described below:
* mb_optimize_scan=1 - On
* mb_optimize_scan=0 - Off
* mb_optimize_scan not passed - On if no. of BGs > threshold else off
* Remounts retain previous value unless we explicitly pass the option
with a new value
Fixes: cebe85d570 ("ext4: switch to the new mount api")
Cc: stable@kernel.org
Reported-by: Ritesh Harjani <riteshh@linux.ibm.com>
Signed-off-by: Ojaswin Mujoo <ojaswin@linux.ibm.com>
Reviewed-by: Ritesh Harjani <riteshh@linux.ibm.com>
Link: https://lore.kernel.org/r/c98970fe99f26718586d02e942f293300fb48ef3.1646732698.git.ojaswin@linux.ibm.com
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
During the system suspend path we must set all queues to operate in
polled mode as it is possible for any protocol built using this mailbox,
such as TISCI, to require communication during the no irq phase of suspend,
and we cannot rely on interrupts there.
Polled mode is implemented by allowing the mailbox user to define an
RX channel as part of the message that is sent which is what gets polled
for a response. If polled mode is enabled, this will immediately be
polled for a response at the end of the mailbox send_data op before
returning success for the data send or timing out if no response is
received.
Finally, to ensure polled mode is always enabled during system suspend,
iterate through all queues to set RX queues to polled mode during system
suspend and disable polled mode for all in the resume handler.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Refactor the portion of code that actually reads received messages from
a queue into its own function, ti_msgmgr_queue_rx_data, that is called
by the interrupt handler instead of reading directly from the handler.
Signed-off-by: Dave Gerlach <d-gerlach@ti.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
i.MX93 S401 MU support two interrupts: tx empty and rx full.
- Introduce a new flag IMX_MU_V2_IRQ for the dual interrupt case
- Update Copyright
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
To i.MX93 S401 MU, there are two interrupts: rx full and tx empty.
So extend irq to an array to prepare i.MX93 S401 MU support.
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Similar to i.MX8ULP S4 MU, i.MX93 MU is dedicated for communication
between Sentinel and Cortex-A cores from hardware design, it could not be
reused for other purpose.
However i.MX93 S4 MU use separate tx/rx interrupt, so update
interrupts and add interrupt-names property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
Add bindings for i.MX93 MU which derived from i.MX8ULP
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
i.MX8/8X SECO firmware IPC is an implementation of passing messages.
But current imx-mailbox driver only support one word message,
i.MX8/8X linux side firmware has to request four TX, four RX and a
TXDB to support IPC to SECO firmware. This is low efficent and
more interrupts triggered compared with one TX and one RX.
To make SECO MU work,
- parse the size of msg.
- Only enable TR0/RR0 interrupt for transmit/receive message.
- For TX/RX, only support one TX channel and one RX channel
- For RX, support receive msg of any size, limited by hardcoded value
of 30.
Signed-off-by: Franck LENORMAND <franck.lenormand@nxp.com>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>
