Add two tests to pmtu.sh, for verifying that PMTU exceptions get
properly created for routes that don't belong to the main table.
A fib-rule based on the packet's DSCP field is used to jump to the
correct table. ECN shouldn't interfere with this process, so each test
has two components: one that only sets DSCP and one that sets both DSCP
and ECN.
One of the test triggers PMTU exceptions using ICMP Echo Requests, the
other using UDP packets (to test different handlers in the kernel).
A few adjustments are necessary in the rest of the script to allow
policy routing scenarios:
* Add global variable rt_table that allows setup_routing_*() to
add routes to a specific routing table. By default rt_table is set
to "main", so existing tests don't need to be modified.
* Another global variable, policy_mark, is used to define which
dsfield value is used for policy routing. This variable has no
effect on tests that don't use policy routing.
* The UDP version of the test uses socat. So cleanup() now also need
to kill socat PIDs.
* route_get_dst_pmtu_from_exception() and route_get_dst_exception()
now take an optional third argument specifying the dsfield. If
not specified, 0 is used, so existing users don't need to be
modified.
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The PMTU update and ICMP redirect helper functions initialise their fl4
variable with either __build_flow_key() or build_sk_flow_key(). These
initialisation functions always set ->flowi4_scope with
RT_SCOPE_UNIVERSE and might set the ECN bits of ->flowi4_tos. This is
not a problem when the route lookup is later done via
ip_route_output_key_hash(), which properly clears the ECN bits from
->flowi4_tos and initialises ->flowi4_scope based on the RTO_ONLINK
flag. However, some helpers call fib_lookup() directly, without
sanitising the tos and scope fields, so the route lookup can fail and,
as a result, the ICMP redirect or PMTU update aren't taken into
account.
Fix this by extracting the ->flowi4_tos and ->flowi4_scope sanitisation
code into ip_rt_fix_tos(), then use this function in handlers that call
fib_lookup() directly.
Note 1: We can't sanitise ->flowi4_tos and ->flowi4_scope in a central
place (like __build_flow_key() or flowi4_init_output()), because
ip_route_output_key_hash() expects non-sanitised values. When called
with sanitised values, it can erroneously overwrite RT_SCOPE_LINK with
RT_SCOPE_UNIVERSE in ->flowi4_scope. Therefore we have to be careful to
sanitise the values only for those paths that don't call
ip_route_output_key_hash().
Note 2: The problem is mostly about sanitising ->flowi4_tos. Having
->flowi4_scope initialised with RT_SCOPE_UNIVERSE instead of
RT_SCOPE_LINK probably wasn't really a problem: sockets with the
SOCK_LOCALROUTE flag set (those that'd result in RTO_ONLINK being set)
normally shouldn't receive ICMP redirects or PMTU updates.
Fixes: 4895c771c7 ("ipv4: Add FIB nexthop exceptions.")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add an API for a fixed factor clk that uses an index for the parent
instead of a string name. This allows us to move drivers away from the
string based method of describing parents and use the DT/firmware based
method instead.
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: devicetree@vger.kernel.org
Link: https://lore.kernel.org/r/20220226040723.143705-2-marex@denx.de
[sboyd@kernel.org: Expose a new API instead of internal function]
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
There is no function mlx5e_get_sq(), remove the declaration.
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Moshe Tal <moshet@nvidia.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Starting from commit
4cab346bcf ("net/mlx5: No command allowed when command interface is not ready"),
no calls to mlx5_cmd_trigger_completions() are external to cmd.c anymore.
Make it a static function.
Signed-off-by: Tariq Toukan <tariqt@nvidia.com>
Reviewed-by: Gal Pressman <gal@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
After introducing multi-buffer XDP_TX, the MLX5E_XDP_TX_DS_COUNT define
became misleading. It's no longer the DS count of an XDP_TX WQE, this
WQE can be longer because of fragments.
As this define is only used at one place in mlx5e_open_xdpsq(), it's
also not very useful anymore. This commit removes the define and puts
the calculation of ds_count for prefilled single-fragment WQEs inline.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit enables passing multi buffer XDP frames to the TX handlers
on XDP_TX. Fragments are DMA synchronized to the device and queued to
the xdpi_fifo for a subsequent unmapping.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The next commit will add more indentation levels to mlx5e_xmit_xdp_buff.
To keep indentation minimal, unindent the else-block of the if-statement
by doing an early return.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
xmit_xdp_frame is extended to support sending fragmented XDP frames. The
next commit will start using this functionality.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When MPWQE is disabled, mlx5e_open_xdpsq() prefills the common fields of
WQEs in the XDP SQ to save time when sending packets.
mlx5e_xmit_xdp_frame() runs on the prefilled fields, however, sending
multi buffer XDP frames would require changing some of these fields on a
per-packet basis. Besides that, mlx5e_xmit_xdp_frame() will be used as a
fallback to send multi buffer XDP frames when MPWQE is enabled (MPWQE
can only handle linear packets).
In order to prepare for XDP multi buffer support, this commit introduces
a mode for mlx5e_xmit_xdp_frame() that fills all the fields itself.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
When MPWQE is disabled, mlx5e_open_xdpsq prefills the common fields of
WQEs in the XDP SQ to save time when sending packets. One of such fields
is eseg->inline_hdr.sz, which can be either 0 or MLX5E_XDP_MIN_INLINE,
depending on the inline mode of the SQ.
The inline mode can't change during the lifetime of the SQ, so setting
this field again in mlx5e_xmit_xdp_frame is redundant. Moreover, the
xmit function only sets it to MLX5E_XDP_MIN_INLINE, but not to 0 in the
other case.
This commit removes the redundant assignment in mlx5e_xmit_xdp_frame.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The implementations of xmit_xdp_frame get the xdpi parameter of type
struct mlx5e_xdp_info for the sole purpose of calling
mlx5e_xdpi_fifo_push() on success.
This commit moves this call outside of xmit_xdp_frame, shifting this
responsibility to the caller. It will allow more fine-grained handling
of XDP info for cases when an xdp_frame is fragmented.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Use page_pool_set_dma_addr() to store the DMA address of a page inside
struct page, in order to avoid passing struct mlx5e_dma_info to XDP
handlers. Previously, struct mlx5e_dma_info was used to pass both the
DMA address and the page, and it worked well for the single-fragment
case.
When XDP multi buffer is in use, and a fragmented xdp_frame has to be
transmitted, the driver needs to know the DMA addresses of fragments,
however, the array of fragments in struct skb_shared_info doesn't
contain them. In order to pass the DMA addresses, the driver puts them
into struct page itself, which is accessible from the array of fragments
in struct skb_shared_info. The existing XDP handlers are modified to
remove the dependency on struct mlx5e_dma_info.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
This commit adds XDP multi buffer support to the RX path in the
non-linear legacy RQ mode. mlx5e_xdp_handle is called from
mlx5e_skb_from_cqe_nonlinear.
XDP_TX action for fragmented XDP frames is not yet supported and
blocked.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
The implementation of XDP in mlx5e assumes that the frame size is equal
to the page size. Force this limitation in the non-linear mode for XDP
multi buffer.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
XDP multi buffer implementation in the kernel assumes that all fragments
have the same size. bpf_xdp_frags_increase_tail uses this assumption to
get the size of the last fragment, and __xdp_build_skb_from_frame uses
it to calculate truesize as nr_frags * xdpf->frame_sz.
The current implementation of mlx5e uses fragments of different size in
non-linear legacy RQ. Specifically, the last fragment can be larger than
the others. It's an optimization for packets smaller than MTU.
This commit adapts mlx5e to the kernel limitations and makes it use
fragments of the same size, in order to add support for XDP multi
buffer. The change is applied only if XDP is active, otherwise the old
optimization still applies.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5e_skb_from_cqe_nonlinear creates an xdp_buff first, putting the
first fragment as the linear part, and the rest of fragments as
fragments to struct skb_shared_info in the tailroom. Then it creates an
SKB in place, based on the xdp_buff. The XDP program is not called in
this commit yet.
This commit contains no functional change, except the SKB is built over
the whole frag_stride of the first fragment, instead of the minimal size
required (headroom, data and skb_shared_info).
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Merge series from Ranjani Sridharan <ranjani.sridharan@linux.intel.com>:
This series is a continuation to the SOF IPC abstraction work to support
the new IPC version introduced in the SOF firmware. It makes the top-level
control IO, PCM and PM code IPC-agnostic. Other than the first patch,
the rest are purely for abstraction and include no changes in
functionality.
Currently the reading of the onstack array is confusing since two
out of three members are of different types. Let it be more clear
by explicitly set the array size, so everybody will understand that
parameters are cast to the type of the array.
While at it, add a missed space.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
The deprecated i2c ->probe() functionality doesn't work with
OF compatible strings, as it only checks for the i2c device id.
While it's not a problem right now, it would still bring a
better code. Switch to the new way of probing.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Use the module_i2c_driver() macro to make the code smaller
and a bit simpler.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Make use of device property API in this driver so that both OF based
system and ACPI based system can use this driver.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
Fix multi-line comment style:
- start sentences with Capital letter
- use non-networking style of the first line
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
-----BEGIN PGP SIGNATURE-----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=rhQe
-----END PGP SIGNATURE-----
Merge tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6
Pull cifs fix from Steve French:
"Small fix for regression in multiuser mounts.
The additional improvements suggested by Ronnie to make the server and
session status handling code easier to read can wait for the 5.18
merge window."
* tag '5.17-rc8-smb3-fix' of git://git.samba.org/sfrench/cifs-2.6:
smb3: fix incorrect session setup check for multiuser mounts
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEHUIqys8OyG1eHf7fS1VPR6WNFOkFAmInffUACgkQS1VPR6WN
FOn9fwf/SCIvgoScBNeQjW4cGTmh11oO+O8i2umibq0pQDLrNF6Ul7ykY6Fdm4Dc
+Ce7c4Vp0O+DRphIkaK5MtNgRmXMOQbqUKcNAQftFS0wCtJ+QVQzOvkVGS3jQA74
KVEY3Jiup3Q5qknBg0r890ENwRLmcGJaPi5DAO+uHcf6ItTpwjv3z6C2ZUeiH6UK
PMSwZgd86dwwH2eU4G5EoAjA+nqOcVvH0V1F49DFsGZ3kkmUS6nMNnSpb5SykszT
4uq+7+c3E2UOC0TlUkyX/xTv4DoZZDi6qqVEaV14bELL1a0FdltjKyIuWTds1Tei
rwPhEOkqOpSnBVjlUWb7icwef21NWg==
=QFe+
-----END PGP SIGNATURE-----
Merge tag 'spi-nor/for-5.18' into mtd/next
SPI NOR core changes:
- move vendor specific code out of the core into vendor drivers.
- unify all function and object names in the vendor modules.
- make setup() callback optional to improve readability.
- skip erase logic when the SPI_NOR_NO_ERASE flag is set at flash
declaration.
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
imx:
- Don't test bus flags in atomic check
mgag200:
- Fix PLL setup on some models
panel:
- Fix bpp settings on Innolux G070Y2-L01
- Fix DRM_PANEL_EDP Kconfig dependencies
-----BEGIN PGP SIGNATURE-----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=dr3Y
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"A few minor changes to finish things off, one mgag200 regression, imx
fix and couple of panel changes.
imx:
- Don't test bus flags in atomic check
mgag200:
- Fix PLL setup on some models
panel:
- Fix bpp settings on Innolux G070Y2-L01
- Fix DRM_PANEL_EDP Kconfig dependencies"
* tag 'drm-fixes-2022-03-18' of git://anongit.freedesktop.org/drm/drm:
drm: Don't make DRM_PANEL_BRIDGE dependent on DRM_KMS_HELPERS
drm/panel: simple: Fix Innolux G070Y2-L01 BPP settings
drm/imx: parallel-display: Remove bus flags check in imx_pd_bridge_atomic_check()
drm/mgag200: Fix PLL setup for g200wb and g200ew
Network drivers can call to netif_get_num_default_rss_queues to get the
default number of receive queues to use. Right now, this default number
is min(8, num_online_cpus()).
Instead, as suggested by Jakub, use the number of physical cores divided
by 2 as a way to avoid wasting CPU resources and to avoid using both CPU
threads, but still allowing to scale for high-end processors with many
cores.
As an exception, select 2 queues for processors with 2 cores, because
otherwise it won't take any advantage of RSS despite being SMP capable.
Tested: Processor Intel Xeon E5-2620 (2 sockets, 6 cores/socket, 2
threads/core). NIC Broadcom NetXtreme II BCM57810 (10GBps). Ran some
tests with `perf stat iperf3 -R`, with parallelisms of 1, 8 and 24,
getting the following results:
- Number of queues: 6 (instead of 8)
- Network throughput: not affected
- CPU usage: utilized 0.05-0.12 CPUs more than before (having 24 CPUs
this is only 0.2-0.5% higher)
- Reduced the number of context switches by 7-50%, being more noticeable
when using a higher number of parallel threads.
Suggested-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Íñigo Huguet <ihuguet@redhat.com>
Link: https://lore.kernel.org/r/20220315091832.13873-1-ihuguet@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This code checks "index" for an upper bound but it does not check for
negatives. Change the type to unsigned to prevent underflows.
Fixes: 3c3c1f1416 ("RDMA/nldev: Allow optional-counter status configuration through RDMA netlink")
Link: https://lore.kernel.org/r/20220316083948.GC30941@kili
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge Intel Hardware Feedback Interface (HFI) thermal driver for
5.18-rc1 and update the intel-speed-select utility to support that
driver.
* thermal-hfi:
tools/power/x86/intel-speed-select: v1.12 release
tools/power/x86/intel-speed-select: HFI support
tools/power/x86/intel-speed-select: OOB daemon mode
thermal: intel: hfi: INTEL_HFI_THERMAL depends on NET
thermal: netlink: Fix parameter type of thermal_genl_cpu_capability_event() stub
thermal: intel: hfi: Notify user space for HFI events
thermal: netlink: Add a new event to notify CPU capabilities change
thermal: intel: hfi: Enable notification interrupt
thermal: intel: hfi: Handle CPU hotplug events
thermal: intel: hfi: Minimally initialize the Hardware Feedback Interface
x86/cpu: Add definitions for the Intel Hardware Feedback Interface
x86/Documentation: Describe the Intel Hardware Feedback Interface
Merge powerclamp thermal driver changes, int340x thermal driver changes
and thermal documentation changes for 5.18-rc1:
- Don't use bitmap_weight() in end_power_clamp() in the powerclamp
driver (Yury Norov).
- Update the OS policy capabilities handshake in the int340x thermal
driver (Srinivas Pandruvada).
- Increase the policies bitmap size in int340x (Srinivas Pandruvada).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
int340x thermal driver (Rafael Wysocki).
- Check for NULL after calling kmemdup() in int340x (Jiasheng Jiang).
- Add Intel Dynamic Power and Thermal Framework (DPTF) kernel interface
documentation (Srinivas Pandruvada).
- Fix bullet list warning in the thermal documentation (Randy Dunlap).
* thermal-powerclamp:
thermal: intel_powerclamp: don't use bitmap_weight() in end_power_clamp()
* thermal-int340x:
thermal: int340x: Update OS policy capability handshake
thermal: int340x: Increase bitmap size
thermal: Replace acpi_bus_get_device()
thermal: int340x: Check for NULL after calling kmemdup()
* thermal-docs:
Documentation: thermal: DPTF Documentation
thermal: fix Documentation bullet list warning
Merge power management utilities changes for 5.18-rc1:
- Add tracer tool for the amd-pstate driver (Jinzhou Su).
- Fix PC6 displaying in turbostat on some systems (Artem Bityutskiy).
- Add AMD P-State support to the cpupower utility (Huang Rui).
* pm-tools:
Documentation: amd-pstate: add tracer tool introduction
tools/power/x86/amd_pstate_tracer: Add tracer tool for AMD P-state
tools/power/x86/intel_pstate_tracer: make tracer as a module
cpufreq: amd-pstate: Add more tracepoint for AMD P-State module
turbostat: fix PC6 displaying on some systems
cpupower: Add "perf" option to print AMD P-State information
cpupower: Add function to print AMD P-State performance capabilities
cpupower: Move print_speed function into misc helper
cpupower: Enable boost state support for AMD P-State module
cpupower: Add AMD P-State sysfs definition and access helper
cpupower: Introduce ACPI CPPC library
cpupower: Add the function to get the sysfs value from specific table
cpupower: Initial AMD P-State capability
cpupower: Add the function to check AMD P-State enabled
cpupower: Add AMD P-State capability flag
tools/power/cpupower/{ToDo => TODO}: Rename the todo file
tools: cpupower: fix typo in cpupower-idle-set(1) manpage
The fix for not advancing the iterator if we're using fixed buffers is
broken in that it can hit a condition where we don't terminate the loop.
This results in io-wq looping forever, asking to read (or write) 0 bytes
for every subsequent loop.
Reported-by: Joel Jaeschke <joel.jaeschke@gmail.com>
Link: https://github.com/axboe/liburing/issues/549
Fixes: 16c8d2df7e ("io_uring: ensure symmetry in handling iter types in loop_rw_iter()")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Merge Dynamic Thermal Power Management (DTPM) changes for 5.18-rc1:
- Add DTPM hierarchy description (Daniel Lezcano).
- Change the locking scheme in DTPM (Daniel Lezcano).
- Fix dtpm_cpu cleanup at exit time and missing virtual DTPM pointer
release (Daniel Lezcano).
- Make dtpm_node_callback[] static (kernel test robot).
- Fix spelling mistake "initialze" -> "initialize" in
dtpm_create_hierarchy() (Colin Ian King).
* powercap:
powercap: DTPM: Fix spelling mistake "initialze" -> "initialize"
powercap: DTPM: dtpm_node_callback[] can be static
dtpm/soc/rk3399: Add the ability to unload the module
powercap/dtpm_cpu: Add exit function
powercap/dtpm: Move the 'root' reset place
powercap/dtpm: Destroy hierarchy function
powercap/dtpm: Fixup kfree for virtual node
powercap/dtpm_cpu: Reset per_cpu variable in the release function
powercap/dtpm: Change locking scheme
rockchip/soc/drivers: Add DTPM description for rk3399
powercap/drivers/dtpm: Add dtpm devfreq with energy model support
powercap/drivers/dtpm: Add CPU DT initialization support
powercap/drivers/dtpm: Add hierarchy creation
powercap/drivers/dtpm: Convert the init table section to a simple array
During READ/WRITE preparation, in case of failure in memory registration
using iser_reg_mem_fastreg we must unmap previously mapped iser task.
Link: https://lore.kernel.org/r/20220308145546.8372-5-mgurtovoy@nvidia.com
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Avoid code duplication and add the mapping/unmapping of the protection
buffers to the iser_dma_map_task_data/iser_dma_unmap_task_data functions.
Link: https://lore.kernel.org/r/20220308145546.8372-4-mgurtovoy@nvidia.com
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
After removing the FMR support in iSER, there is only one type of
registration context. Replace the void pointer with the explicit structure
for registration (struct iser_fr_desc).
Link: https://lore.kernel.org/r/20220308145546.8372-3-mgurtovoy@nvidia.com
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Open coding it makes the code more readable and simple.
Link: https://lore.kernel.org/r/20220308145546.8372-2-mgurtovoy@nvidia.com
Reviewed-by: Sergey Gorenko <sergeygo@nvidia.com>
Signed-off-by: Max Gurtovoy <mgurtovoy@nvidia.com>
Acked-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Merge changes related to system sleep, PM domains changes and power
management documentation changes for 5.18-rc1:
- Fix load_image_and_restore() error path (Ye Bin).
- Fix typos in comments in the system wakeup hadling code (Tom Rix).
- Clean up non-kernel-doc comments in hibernation code (Jiapeng
Chong).
- Fix __setup handler error handling in system-wide suspend and
hibernation core code (Randy Dunlap).
- Add device name to suspend_report_result() (Youngjin Jang).
- Make virtual guests honour ACPI S4 hardware signature by
default (David Woodhouse).
- Block power off of a parent PM domain unless child is in deepest
state (Ulf Hansson).
- Use dev_err_probe() to simplify error handling for generic PM
domains (Ahmad Fatoum).
- Fix sleep-in-atomic bug caused by genpd_debug_remove() (Shawn Guo).
- Document Intel uncore frequency scaling (Srinivas Pandruvada).
* pm-sleep:
PM: hibernate: Honour ACPI hardware signature by default for virtual guests
PM: sleep: Add device name to suspend_report_result()
PM: suspend: fix return value of __setup handler
PM: hibernate: fix __setup handler error handling
PM: hibernate: Clean up non-kernel-doc comments
PM: sleep: wakeup: Fix typos in comments
PM: hibernate: fix load_image_and_restore() error path
* pm-domains:
PM: domains: Fix sleep-in-atomic bug caused by genpd_debug_remove()
PM: domains: use dev_err_probe() to simplify error handling
PM: domains: Prevent power off for parent unless child is in deepest state
* pm-docs:
Documentation: admin-guide: pm: Document uncore frequency scaling
In fill_thread_core_info() the ptrace accessible registers are collected
to be written out as notes in a core file. The note array is allocated
from a size calculated by iterating the user regset view, and counting the
regsets that have a non-zero core_note_type. However, this only allows for
there to be non-zero core_note_type at the end of the regset view. If
there are any gaps in the middle, fill_thread_core_info() will overflow the
note allocation, as it iterates over the size of the view and the
allocation would be smaller than that.
There doesn't appear to be any arch that has gaps such that they exceed
the notes allocation, but the code is brittle and tries to support
something it doesn't. It could be fixed by increasing the allocation size,
but instead just have the note collecting code utilize the array better.
This way the allocation can stay smaller.
Even in the case of no arch's that have gaps in their regset views, this
introduces a change in the resulting indicies of t->notes. It does not
introduce any changes to the core file itself, because any blank notes are
skipped in write_note_info().
In case, the allocation logic between fill_note_info() and
fill_thread_core_info() ever diverges from the usage logic, warn and skip
writing any notes that would overflow the array.
This fix is derrived from an earlier one[0] by Yu-cheng Yu.
[0] https://lore.kernel.org/lkml/20180717162502.32274-1-yu-cheng.yu@intel.com/
Co-developed-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220317192013.13655-4-rick.p.edgecombe@intel.com
Merge cpufreq and cpuidle changes for 5.18-rc1:
- Make the schedutil cpufreq governor use to_gov_attr_set() instead
of open coding it (Kevin Hao).
- Replace acpi_bus_get_device() with acpi_fetch_acpi_dev() in the
cpufreq longhaul driver (Rafael Wysocki).
- Unify show() and store() naming in cpufreq and make it use
__ATTR_XX (Lianjie Zhang).
- Make the intel_pstate driver use the EPP value set by the firmware
by default (Srinivas Pandruvada).
- Re-order the init checks in the powernow-k8 cpufreq driver (Mario
Limonciello).
- Make the ACPI processor idle driver check for architectural
support for LPI to avoid using it on x86 by mistake (Mario
Limonciello).
- Add Sapphire Rapids Xeon support to the intel_idle driver (Artem
Bityutskiy).
- Add 'preferred_cstates' module argument to the intel_idle driver
to work around C1 and C1E handling issue on Sapphire Rapids (Artem
Bityutskiy).
- Add core C6 optimization on Sapphire Rapids to the intel_idle
driver (Artem Bityutskiy).
- Optimize the haltpoll cpuidle driver a bit (Li RongQing).
- Remove leftover text from intel_idle() kerneldoc comment and fix
up white space in intel_idle (Rafael Wysocki).
* pm-cpufreq:
cpufreq: powernow-k8: Re-order the init checks
cpufreq: intel_pstate: Use firmware default EPP
cpufreq: unify show() and store() naming and use __ATTR_XX
cpufreq: longhaul: Replace acpi_bus_get_device()
cpufreq: schedutil: Use to_gov_attr_set() to get the gov_attr_set
cpufreq: Move to_gov_attr_set() to cpufreq.h
* pm-cpuidle:
cpuidle: intel_idle: Drop redundant backslash at line end
cpuidle: intel_idle: Update intel_idle() kerneldoc comment
cpuidle: haltpoll: Call cpuidle_poll_state_init() later
intel_idle: add core C6 optimization for SPR
intel_idle: add 'preferred_cstates' module argument
intel_idle: add SPR support
ACPI: processor idle: Check for architectural support for LPI
cpuidle: PSCI: Move the `has_lpi` check to the beginning of the function
Daniel Borkmann says:
====================
pull-request: bpf 2022-03-18
We've added 2 non-merge commits during the last 18 day(s) which contain
a total of 2 files changed, 50 insertions(+), 20 deletions(-).
The main changes are:
1) Fix a race in XSK socket teardown code that can lead to a NULL pointer
dereference, from Magnus.
2) Small MAINTAINERS doc update to remove Lorenz from sockmap, from Lorenz.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
xsk: Fix race at socket teardown
bpf: Remove Lorenz Bauer from L7 BPF maintainers
====================
Link: https://lore.kernel.org/r/20220318152418.28638-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Make ACPI documentation updates for 5.18-rc1:
- Update the ACPI device enumeration documentation and unify the ASL
style in GPIO-related examples (Andy Shevchenko).
* acpi-docs:
ACPI: docs: gpio-properties: Unify ASL style for GPIO examples
ACPI: docs: enumeration: Unify Package () for properties
ACPI: docs: enumeration: Drop comma for terminator entry
ACPI: docs: enumeration: Drop ugly ifdeffery from the examples
ACPI: docs: enumeration: Amend PWM enumeration ASL example
ACPI: docs: enumeration: Remove redundant .owner assignment
ACPI: docs: enumeration: Update UART serial bus resource documentation
ACPI: docs: enumeration: Discourage to use custom _DSM methods
Looks like a victim of too much copy/paste, we should not be looking
at req->open.how in accept. The point is to check CLOEXEC and error
out, which we don't invalid direct descriptors on exec. Hence any
attempt to get a direct descriptor with CLOEXEC is invalid.
No harm is done here, as req->open.how.flags overlaps with
req->accept.flags, but it's very confusing and might change if either of
those command structs are modified.
Fixes: aaa4db12ef ("io_uring: accept directly into fixed file table")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
BPF_TRACE_KPROBE_MULTI is a new attach type name, add it to bpftool's
table. This fixes a currently failing CI bpftool check.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20220318150106.2933343-1-andrii@kernel.org
There's an inconsistency that arises when a register set can be accessed
internally via MMIO, or externally via SPI. The VSC7514 chip allows both
modes of operation. When internally accessed, the system utilizes __iomem,
devm_ioremap_resource, and devm_regmap_init_mmio.
For SPI it isn't possible to utilize memory-mapped IO. To properly operate,
the resource base must be added to the register before every operation.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220313224524.399947-3-colin.foster@in-advantage.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add an additional reg_downshift to be applied to register addresses before
any register accesses. An example of a device that uses this is a VSC7514
chip, which require each register address to be downshifted by two if the
access is performed over a SPI bus.
Signed-off-by: Colin Foster <colin.foster@in-advantage.com>
Link: https://lore.kernel.org/r/20220313224524.399947-2-colin.foster@in-advantage.com
Signed-off-by: Mark Brown <broonie@kernel.org>
