Signal processor SIGP_SET_PREFIX command expects physical
address of the lowcore to be installed, but instead the
virtual address is provided.
Note: this does not fix a bug currently, since virtual and
physical addresses are identical.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
cleanup the s390's use of the timer API
- del_timer() contains timer_pending() condition
- mod_timer(timer, expires) is equivalent to:
del_timer(timer);
timer->expires = expires;
add_timer(timer);
If the timer is inactive it will be activated, using add_timer() on
condition !timer_pending(&private->timer) is redundant.
Just cleanup, no logic change.
Signed-off-by: Yu Liao <liaoyu15@huawei.com>
Link: https://lore.kernel.org/r/20220322030057.1243196-1-liaoyu15@huawei.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
While the original code is valid, it is not the obvious choice for the
sizeof() call and in preparation to limit the scope of the list iterator
variable the sizeof should be changed to the size of the variable
being allocated.
Signed-off-by: Jakob Koschel <jakobkoschel@gmail.com>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The vfio_ap device driver registers a group notifier function to handle
the VFIO_GROUP_NOTIFY_SET_KVM event signalling the KVM pointer has been
set or cleared. There are two helper functions invoked by the handler
function: One called when the KVM pointer has been set, and the other
when the pointer is cleared.
The kernel doc for both of these functions contains a comment introduced
by commit 0cc00c8d40 (s390/vfio-ap: fix circular lockdep when
setting/clearing crypto masks) that is no longer valid. This patch removes
this comment from the kernel doc of each helper function.
Commit 86956e7076 (s390/vfio-ap: replace open coded locks for
VFIO_GROUP_NOTIFY_SET_KVM notification) added a parameter to the signature
of the helper function that handles the event indicating the KVM pointer
has been cleared. The parameter added was the KVM pointer itself.
One of the function's primary purposes is to clear the KVM pointer from the
ap_matrix_mdev instance in which it is stored. Since the callers of this
function derive the KVM pointer passed to the function from the
ap_matrix_mdev object itself, it is completely unnecessary to include this
parameter in the function's signature since it can simply be retrieved from
the ap_matrix_mdev object which is also passed in. This patch removes the
KVM pointer from the function's signature.
Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Macro mem_assign_absolute() is able to access the whole memory, but
is only used and makes sense when updating the absolute lowcore.
Instead, introduce get_abs_lowcore() and put_abs_lowcore() macros
that limit access to absolute lowcore addresses only.
Suggested-by: Heiko Carstens <hca@linux.ibm.com>
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Get rid of duplicate code and redundant data.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Macro mem_assign_absolute() is used to initialize a target
CPU lowcore callback parameters. But despite the macro name
it writes to the absolute lowcore only if the target CPU is
offline. In case the CPU is online the macro does implicitly
write to the normal memory.
That behaviour is correct, but extremely subtle. Sacrifice
few program bits in favour of clarity and distinguish between
online vs offline CPUs and normal vs absolute lowcore pointer.
Reviewed-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Currently when unwinding starts from pt_regs or encounters pt_regs along
the way unwinder tries to yield 2 unwinding entries:
1. (reliable) ip1: pt_regs->psw.addr, sp1: regs->gprs[15]
2. (non-reliable) ip2: sp1->gprs[8] (r14), sp2: regs->gprs[15]
In case of kretprobes those are identical and serves no other purpose
than causing confusion over duplicated entries and cause kprobes tests
to fail. So, skip a duplicate non-reliable entry in this case.
With that kretprobes and unwinder implementation now comply with
ARCH_CORRECT_STACKTRACE_ON_KRETPROBE.
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Based on commit cd9bc2c925 ("arm64: Recover kretprobe modified return
address in stacktrace").
"""
Since the kretprobe replaces the function return address with
the __kretprobe_trampoline on the stack, stack unwinder shows it
instead of the correct return address.
This checks whether the next return address is the
__kretprobe_trampoline(), and if so, try to find the correct
return address from the kretprobe instance list.
"""
Original patch series:
https://lore.kernel.org/all/163163030719.489837.2236069935502195491.stgit@devnote2/
Reviewed-by: Tobias Huschle <huschle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Adjust indentation of inline assemblies, so all comments
start at the same position.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use insn format with instruction format specifier instead of plain
longs. This way it is also more obvious that code instead of data is
generated.
The generated code is identical.
Reviewed-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use insn format with instruction format specifier instead of plain
longs. This way it is also more obvious that code instead of data is
generated.
The generated code is identical.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Use readable nop instructions within the code which generates
the padding areas, instead of unreadable byte patterns.
The generated code is identical.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There are many different types of translation exceptions but only a
translation-specification exception leads to a kernel panic since it
indicates corrupted page tables, which must never happen.
Improve the panic message so it is a bit more obvious what this is about.
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This silences the following coccinelle warning:
drivers/s390/char/tape_34xx.c:360:38-39: WARNING: sum of probable bitmasks, consider |
Signed-off-by: Haowen Bai <baihaowen@meizu.com>
Link: https://lore.kernel.org/r/1647334421-29989-1-git-send-email-baihaowen@meizu.com
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Looks like this endif comment was erroneously unchanged when copied over
from the x86 version.
Signed-off-by: Russell Currey <ruscur@russell.cc>
Link: https://lore.kernel.org/r/20220304090109.29386-1-ruscur@russell.cc
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Various spelling mistakes in comments.
Detected with the help of Coccinelle.
Signed-off-by: Julia Lawall <Julia.Lawall@inria.fr>
Signed-off-by: Harald Freudenberger <freude@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Add a filter for custom devices to check for allowed control domains of
admin CPRBs. This filter only applies to custom devices and not to the
main device.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Zcrypt custom devices now support control domain masks. Users can set and
modify this mask to allow custom devices to access certain control domains.
Signed-off-by: Juergen Christ <jchrist@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
- Use 'make savedefconfig' to refresh & regenerate the files
- Add in KVM boot enablers
- Enable the cgroup features most distros rely on
[ fix bug found by Nathan Chancellor ]
Acked-by: Nathan Chancellor <nathan@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/YjwsUT/6PkRPjnHE@gmail.com
Fixups and enhancements for OpenRISC:
- Small fixup to remove duplicate initializer in memcpy from Kuniyuki
Iwashima
-----BEGIN PGP SIGNATURE-----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=5NKE
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne:
"Not much for OpenRISC this merge window, I do have some things on the
back burner like sparse warning cleanups and new defconfigs. But I
didn't get time to polish the patches off for this round. There are
OpenRISC updates coming in via other queues like removal of set_fs()
and possibly new generic ticket locks.
This just has a small fixup to remove duplicate initializer in memcpy
from Kuniyuki Iwashima"
* tag 'for-linus' of https://github.com/openrisc/linux:
openrisc/boot: Remove unnecessary initialisation in memcpy().
coarse grained, hardware based, forward edge Control-Flow-Integrity mechanism
where any indirect CALL/JMP must target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation is
limited to 2 instructions (and typically fewer) on branch targets not starting
with ENDBR. CET-IBT also limits speculation of the next sequential instruction
after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides, as
described above, speculation limits itself.
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
-----BEGIN PGP SIGNATURE-----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=jZfK
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 CET-IBT (Control-Flow-Integrity) support from Peter Zijlstra:
"Add support for Intel CET-IBT, available since Tigerlake (11th gen),
which is a coarse grained, hardware based, forward edge
Control-Flow-Integrity mechanism where any indirect CALL/JMP must
target an ENDBR instruction or suffer #CP.
Additionally, since Alderlake (12th gen)/Sapphire-Rapids, speculation
is limited to 2 instructions (and typically fewer) on branch targets
not starting with ENDBR. CET-IBT also limits speculation of the next
sequential instruction after the indirect CALL/JMP [1].
CET-IBT is fundamentally incompatible with retpolines, but provides,
as described above, speculation limits itself"
[1] https://www.intel.com/content/www/us/en/developer/articles/technical/software-security-guidance/technical-documentation/branch-history-injection.html
* tag 'x86_core_for_5.18_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (53 commits)
kvm/emulate: Fix SETcc emulation for ENDBR
x86/Kconfig: Only allow CONFIG_X86_KERNEL_IBT with ld.lld >= 14.0.0
x86/Kconfig: Only enable CONFIG_CC_HAS_IBT for clang >= 14.0.0
kbuild: Fixup the IBT kbuild changes
x86/Kconfig: Do not allow CONFIG_X86_X32_ABI=y with llvm-objcopy
x86: Remove toolchain check for X32 ABI capability
x86/alternative: Use .ibt_endbr_seal to seal indirect calls
objtool: Find unused ENDBR instructions
objtool: Validate IBT assumptions
objtool: Add IBT/ENDBR decoding
objtool: Read the NOENDBR annotation
x86: Annotate idtentry_df()
x86,objtool: Move the ASM_REACHABLE annotation to objtool.h
x86: Annotate call_on_stack()
objtool: Rework ASM_REACHABLE
x86: Mark __invalid_creds() __noreturn
exit: Mark do_group_exit() __noreturn
x86: Mark stop_this_cpu() __noreturn
objtool: Ignore extra-symbol code
objtool: Rename --duplicate to --lto
...
The driver currently uses a CPU family match of 17h to determine
EFCH_PM_DECODEEN_WDT_TMREN register support. This family check will not
support future AMD CPUs and instead will require driver updates to add
support.
Remove the family 17h family check and add a check for SMBus PCI
revision ID 0x51 or greater. The MMIO access method has been available
since at least SMBus controllers using PCI revision 0x51. This revision
check will support family 17h and future AMD processors including EFCH
functionality without requiring driver changes.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-5-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
cd6h/cd7h port I/O can be disabled on recent AMD hardware. Read
accesses to disabled cd6h/cd7h port I/O will return F's and written
data is dropped. It is recommended to replace the cd6h/cd7h
port I/O with MMIO.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-4-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Combine MMIO base address and alternate base address detection. Combine
based on layout type. This will simplify the function by eliminating
a switch case.
Move existing request/release code into functions. This currently only
supports port I/O request/release. The move into a separate function
will make it ready for adding MMIO region support.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-3-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Refactor driver's timer initialization into new function. This is needed
inorder to support adding new device layouts while using common timer
initialization.
Co-developed-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Robert Richter <rrichter@amd.com>
Signed-off-by: Terry Bowman <terry.bowman@amd.com>
Tested-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220202153525.1693378-2-terry.bowman@amd.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Commit e07a4c79ca ("watchdog: orion_wdt: use timer1 as a pretimeout")
added support for a pretimeout on Armada-38x variants. Because the
Armada-XP variants use armada370_start/armada370_stop (due to missing an
explicit RSTOUT mask bit for the watchdog). Add the required pretimeout
support to armada370_start/armada370_stop for Armada-XP.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220211003257.2037332-3-chris.packham@alliedtelesis.co.nz
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
BCM4908 is a SoCs family that shares a lot of hardware with BCM63xx
including the watchdog block. Allow building this driver for it.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Acked-by: Florian Fainelli <f.fainelli@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220209203202.26395-1-zajec5@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add the compatible string for the R-Car Gen4 family.
No further driver changes are needed.
Signed-off-by: Thanh Quan <thanh.quan.xn@renesas.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/cc395105e1d34aab2c076d368c0737833970b9d2.1642525158.git.geert+renesas@glider.be
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Adjust function comments to the kernel doc format. It
also adjusts some variable names and adds return values.
No functional change.
Changes from V1:
Change "Returns" to "Return:" (Randy Dunlap)
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Randy Dunlap <rdunlap@infradead.org>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Daniel Bristot de Oliveira <bristot@kernel.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/30378a03e9cd9b5f6e92ec9bf512edc38bad8627.1644589712.git.bristot@kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Add support for not stopping the watchdog
when the userspace application quits. At
closing of the device, the driver cannot
determine if this was a graceful closure
or if the app crashed. If the support
of nowayout on this driver, the system integrator
can select the behaviour by setting the kernel
config and enabling it.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org> (maintainer:WATCHDOG DEVICE DRIVERS)
Cc: Guenter Roeck <linux@roeck-us.net> (maintainer:WATCHDOG DEVICE DRIVERS)
Cc: Joel Stanley <joel@jms.id.au> (supporter:ARM/ASPEED MACHINE SUPPORT)
Cc: Andrew Jeffery <andrew@aj.id.au> (reviewer:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-watchdog@vger.kernel.org (open list:WATCHDOG DEVICE DRIVERS)
Cc: linux-arm-kernel@lists.infradead.org (moderated list:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-aspeed@lists.ozlabs.org (moderated list:ARM/ASPEED MACHINE SUPPORT)
Cc: linux-kernel@vger.kernel.org (open list)
Signed-off-by: Eduardo Valentin <eduval@amazon.com>
Signed-off-by: Eduardo Valentin <evalenti@kernel.org>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220212021033.2344-1-eduval@amazon.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
If the probe fails, we should use pm_runtime_disable() to balance
pm_runtime_enable().
Fixes: 2d63908bdb ("watchdog: Add K3 RTI watchdog support")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220105092114.23932-1-linmq006@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The i.MX watchdog cannot be disabled by software once it has been
enabled. This means that it can't be stopped before suspend.
For systems that enter low power mode this is fine, as the watchdog will
be automatically stopped by hardware in low power mode. Not all i.MX
platforms support low power mode in the mainline kernel. For example the
i.MX7D does not enter low power mode and so will be rebooted 2 minutes
after entering sleep states.
This patch introduces a device tree property "fsl,ping-during-suspend"
that can be used to enable ping on suspend support for these systems.
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20220127104739.312592-1-alistair@alistair23.me
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
The bug is here:
err = snd_card_cs423x_pnp(dev, card->private_data, pdev, cdev);
The list iterator value 'cdev' will *always* be set and non-NULL
by list_for_each_entry(), so it is incorrect to assume that the
iterator value will be NULL if the list is empty or no element
is found.
To fix the bug, use a new variable 'iter' as the list iterator,
while use the original variable 'cdev' as a dedicated pointer
to point to the found element. And snd_card_cs423x_pnp() itself
has NULL check for cdev.
Cc: stable@vger.kernel.org
Fixes: c2b73d1458 ("ALSA: cs4236: cs4232 and cs4236 driver merge to solve PnP BIOS detection")
Signed-off-by: Xiaomeng Tong <xiam0nd.tong@gmail.com>
Link: https://lore.kernel.org/r/20220327060822.4735-1-xiam0nd.tong@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Lenovo P360 is another platform equipped with ALC897, and it needs
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20220325160501.705221-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Includes moving to common code (from cifs and ksmbd protocol related
headers)
- query and query directory info levels and structs
- set info structs
- SMB2 lock struct and flags
- SMB2 echo req
Also shorten a few flag names (e.g. SMB2_LOCKFLAG_EXCLUSIVE_LOCK
to SMB2_LOCKFLAG_EXCLUSIVE)
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
The definitions for the ioctl SMB3 request and response as well
as length of various fields defined in the protocol documentation
were duplicated in fs/ksmbd and fs/cifs. Move these to the common
code in fs/smbfs_common/smb2pdu.h
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
When switching zones or network namespaces without doing a ct clear in
between, it is now leaking a reference to the old ct entry. That's
because tcf_ct_skb_nfct_cached() returns false and
tcf_ct_flow_table_lookup() may simply overwrite it.
The fix is to, as the ct entry is not reusable, free it already at
tcf_ct_skb_nfct_cached().
Reported-by: Florian Westphal <fw@strlen.de>
Fixes: 2f131de361 ("net/sched: act_ct: Fix flow table lookup after ct clear or switching zones")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
- The run time string verifier that checks all trace event formats
as they are read from the tracing file to make sure that the %s
pointers are not reading something that no longer exists, failed
to account for %*.s where the length given is zero, and the string
is NULL. It incorrectly flagged it as a null pointer dereference and
gave a WARN_ON().
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYjzyxBQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qk+WAP4+ICutAiIGyPmHEqtjLGyDPC25nbB3
vg+qWWkWEOIi5gD+PpGsGSE7HYFdWJi1BCfshNOm8I92TyoE2nJkXh3LeA8=
=mZr5
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull trace event string verifier fix from Steven Rostedt:
"The run-time string verifier checks all trace event formats as
they are read from the tracing file to make sure that the %s pointers
are not reading something that no longer exists.
However, it failed to account for the valid case of '%*.s' where the
length given is zero, and the string is NULL. It incorrectly flagged
it as a null pointer dereference and gave a WARN_ON()"
* tag 'trace-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Have trace event string test handle zero length strings
Recently added smc_sysctl_net_exit() forgot to free
the memory allocated from smc_sysctl_net_init()
for non initial network namespace.
Fixes: 462791bbfa ("net/smc: add sysctl interface for SMC")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Tony Lu <tonylu@linux.alibaba.com>
Cc: Dust Li <dust.li@linux.alibaba.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
These are negative tests, testing TLS code rejects certain
operations. They won't pass without TLS enabled, pure TCP
accepts those operations.
Reported-by: Linux Kernel Functional Testing <lkft@linaro.org>
Fixes: d87d67fd61 ("selftests: tls: test splicing cmsgs")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Clang static analysis reports this representative issue
rvu_npc.c:898:15: warning: Assigned value is garbage
or undefined
req.match_id = action.match_id;
^ ~~~~~~~~~~~~~~~
The initial setting of action is conditional on
if (is_mcam_entry_enabled(...))
The later check of action.op will sometimes be garbage.
So initialize action.
Reduce setting of
*(u64 *)&action = 0x00;
to
*(u64 *)&action = 0;
Fixes: 967db3529e ("octeontx2-af: add support for multicast/promisc packet replication feature")
Signed-off-by: Tom Rix <trix@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups and
new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list
(a common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
Note, the DTS updates will have a merge conflict in your tree. The
fixup should be simple, but if not, I can provide a merged tree if
needed.
All of these have been in linux-next for a while with no reported
issues.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCYj7qpQ8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylRsQCcCryYifAvE2gHaNfI4B01JRWk7gQAoLNiUgvl
l+srEAXgIVueDhmDxy5P
=/Ppv
-----END PGP SIGNATURE-----
Merge tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB/Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt changes for 5.18-rc1.
Nothing major in here, just lots of little improvements and cleanups
and new device support. Highlights are:
- list iterator fixups for when we walk past the end of the list (a
common problem that was cut/pasted in almost all USB gadget
drivers)
- xen USB driver "hardening" for malicious hosts
- xhci driver updates and fixes for more hardware types
- xhci debug cable fixes to make it actually work again
- usb gadget audio driver improvements
- usb gadget storage fixes to work with OS-X
- lots of other small usb gadget fixes and updates
- USB DWC3 driver improvements for more hardware types
- Lots of other small USB driver improvements
- DTS updates for some USB platforms
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (172 commits)
usb: gadget: fsl_qe_udc: Add missing semicolon in qe_ep_dequeue()
dt-bindings: usb: mtk-xhci: add compatible for mt8186
usb: dwc3: Issue core soft reset before enabling run/stop
usb: gadget: Makefile: remove ccflags-y
USB: usb-storage: Fix use of bitfields for hardware data in ene_ub6250.c
usb: gadget: eliminate anonymous module_init & module_exit
usb: usbip: eliminate anonymous module_init & module_exit
xen/usb: harden xen_hcd against malicious backends
usb: dwc3: gadget: Wait for ep0 xfers to complete during dequeue
usb: dwc3: gadget: move cmd_endtransfer to extra function
usb: dwc3: gadget: ep_queue simplify isoc start condition
xen/usb: don't use arbitrary_virt_to_machine()
usb: isp1760: remove redundant max_packet() macro
usb: oxu210hp-hcd: remove redundant call to max_packet() macro
usb: common: usb-conn-gpio: Make VBUS supply completely optional
USB: storage: ums-realtek: fix error code in rts51x_read_mem()
usb: early: xhci-dbc: Fix xdbc number parsing
usb: early: xhci-dbc: Remove duplicate keep parsing
x86/tsc: Be consistent about use_tsc_delay()
usb: gadget: udc: s3c2410: remove usage of list iterator past the loop body
...
