This patch documents the device tree documentation required for
the ST usb3 controller glue layer found in STiH407 devices.
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
This patch adds the ST glue logic to manage the DWC3 HC
on STiH407 SoC family. It manages the powerdown signal,
and configures the internal glue logic and syscfg registers.
[ balbi@ti.com : actually switch over to of_platform_depopulate() ]
Signed-off-by: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
Pull m68k updates from Geert Uytterhoeven:
"Wire up new syscalls getrandom and memfd_create"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Wire up memfd_create
m68k: Wire up getrandom
* Enable timers using DT when booting boards without Legacy-C code
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=cyP9
-----END PGP SIGNATURE-----
Merge tag 'renesas-dt-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC DT Timers Updates for v3.18" from Simon Horman:
* Enable timers using DT when booting boards without Legacy-C code
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-dt-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: genmai-reference: Enable MTU2 in device tree
ARM: shmobile: r7s72100: Add MTU2 device to DT
ARM: shmobile: marzen-reference: Enable TMU0 in device tree
ARM: shmobile: koelsch-reference: Enable CMT0 in device tree
ARM: shmobile: lager-reference: Enable CMT0 in device tree
ARM: shmobile: r8a7779: Add TMU devices to DT
ARM: shmobile: r8a7791: Add CMT devices to DT
ARM: shmobile: r8a7790: Add CMT devices to DT
Conflicts:
arch/arm/mach-shmobile/setup-r8a7779.c
The driver had checks for this sprinkled all over. As we call
sys_to_pcie() before every instance of this check, we can move the
check to this single location to make things clear.
Removing the statements after BUG[_ON]() is safe as the kernel is halted at
this point anyway.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Jingoo Han <jg1.han@samsung.com>
Acked-by: Mohit Kumar <mohit.kumar@st.com>
When booting using the r8a7740/armadillo800eva using dt-reference:
* Use CCF to initialise clocks via DT
* Initialise timers via DT
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=uu7K
-----END PGP SIGNATURE-----
Merge tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC R8a7740 CCF and Timers Updates for v3.18" from Simon Horman:
When booting using the r8a7740/armadillo800eva using dt-reference:
* Use CCF to initialise clocks via DT
* Initialise timers via DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-r8a7740-ccf-and-timers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7740: Remove r8a7740_add_standard_devices_dt
ARM: shmobile: armadillo800eva-reference: Do not use r8a7740_add_standard_devices_dt()
ARM: shmobile: armadillo800eva-reference: Enable CMT1 in device tree
ARM: shmobile: r8a7740: Add CMT1 device to DT
ARM: shmobile: armadillo800eva-reference: add clock overrides to DTS
ARM: shmobile: r8a7740: add MSTP clock assignments to DT
ARM: shmobile: r8a7740: add SoC clocks to DTS
ARM: shmobile: r8a7740: clock register bits
This effectively reverts f216f57ffe ("PCI: imx6: Probe the PCIe in
fs_initcall()") as the resource allocation issue that prevented the driver
from working properly at module_initcall level is now fixed in
pcie-designware.c.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Richard Zhu <r65037@freescale.com>
The atmel,clk-divisors property is taking 4 divisors, if less are
provided, the clock registration will fail.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Actually register clocks from device tree when using the common clock
framework.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
[nicolas.ferre@atmel.com: add at91 to function name]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
* pci/host-designware:
PCI: designware: Remove pci_assign_unassigned_resources() from dw_pcie_host_init()
PCI: designware: Use pci_create_root_bus() instead of pci_scan_root_bus()
PCI: designware: Parse bus-range property from devicetree
PCI: designware: Add support for v3.65 hardware
The at91sam9g20 SOC uses its own pllb implementation which is different
from the one inherited from at91sam9260 SOC.
Signed-off-by: Gaël PORTAY <gael.portay@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Dave Hansen reports a massive scalability regression in an uncontained
page fault benchmark with more than 30 concurrent threads, which he
bisected down to 05b8430123 ("mm: memcontrol: use root_mem_cgroup
res_counter") and pin-pointed on res_counter spinlock contention.
That change relied on the per-cpu charge caches to mostly swallow the
res_counter costs, but it's apparent that the caches don't scale yet.
Revert memcg back to bypassing res_counters on the root level in order
to restore performance for uncontained workloads.
Reported-by: Dave Hansen <dave@sr71.net>
Signed-off-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: Dave Hansen <dave.hansen@intel.com>
Acked-by: Michal Hocko <mhocko@suse.cz>
Acked-by: Vladimir Davydov <vdavydov@parallels.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This patch changes sync_filesystem() to be EXPORT_SYMBOL().
The reason this is needed is that starting with 3.15 kernel, due to
Theodore Ts'o's commit 02b9984d64 ("fs: push sync_filesystem() down to
the file system's remount_fs()"), all file systems that have dirty data
to be written out need to call sync_filesystem() from their
->remount_fs() method when remounting read-only.
As this is now a generically required function rather than an internal
only function it should be EXPORT_SYMBOL() so that all file systems can
call it.
Signed-off-by: Anton Altaparmakov <aia21@cantab.net>
Acked-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* Use shmobile_init_delay across a wider range of SoCs
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=7HU1
-----END PGP SIGNATURE-----
Merge tag 'renesas-init-delay-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/soc
Merge "Renesas ARM Based SoC Init Delay Updates For v3.18" from Simon Horman:
* Use shmobile_init_delay across a wider range of SoCs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-init-delay-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: kzm9g: Use shmobile_init_delay()
ARM: shmobile: bockw: Use shmobile_init_delay()
ARM: shmobile: r8a7778: Use shmobile_init_delay()
ARM: shmobile: sh73a0: Use shmobile_init_delay()
ARM: shmobile: Remove shmobile_setup_delay()
ARM: shmobile: r8a73a4: Use shmobile_init_delay()
ARM: shmobile: sh7372: Use shmobile_init_delay()
ARM: shmobile: r8a7778: Update DTS to include CPU frequency
ARM: shmobile: sh73a0: Update DTS to include CPU frequency
ARM: shmobile: sh7372: Update DTS to include CPU frequency
ARM: shmobile: kzm9g-reference: Remove unneeded nr_irqs initialization
ARM: shmobile: kzm9g: Remove unneeded nr_irqs initialization
ARM: shmobile: marzen: Remove NR_IRQS_LEGACY
ARM: shmobile: ape6evm: Use shmobile_init_delay()
ARM: shmobile: ape6evm: Add shmobile_init_late()
ARM: shmobile: bockw: Add shmobile_init_late()
ARM: shmobile: marzen: Add shmobile_init_late()
ARM: shmobile: kzm9g: Add shmobile_init_late()
All the fixes people have found for the regulator API have been
documentation fixes, avoiding warnings while building the kerneldoc,
fixing some errors in one of the DT bindings documents and fixing some
typos in the header.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=mZk2
-----END PGP SIGNATURE-----
Merge tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator documentation fixes from Mark Brown:
"All the fixes people have found for the regulator API have been
documentation fixes, avoiding warnings while building the kerneldoc,
fixing some errors in one of the DT bindings documents and fixing some
typos in the header"
* tag 'regulator-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fix kernel-doc warnings in header files
regulator: Proofread documentation
regulator: tps65090: Fix tps65090 typos in example
properly on the new am437x and dra7 hardware for several devices
such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3.
And also included are two minor cosmetic fixes that are not
stictly fixes for the new hardware support added recently to
downgrade a GPMC warning into a debug statement, and fix the
confusing comments for dra7-evm spi1 mux.
Note that these are all .dts changes except for a GPMC change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9VRv
-----END PGP SIGNATURE-----
Merge tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "omap fixes against v3.17-rc3" from Tony Lindgren:
Few fixes for omaps mostly for various devices to get them working
properly on the new am437x and dra7 hardware for several devices
such as I2C, NAND, DDR3 and USB. There's also a clock fix for omap3.
And also included are two minor cosmetic fixes that are not
stictly fixes for the new hardware support added recently to
downgrade a GPMC warning into a debug statement, and fix the
confusing comments for dra7-evm spi1 mux.
Note that these are all .dts changes except for a GPMC change.
* tag 'omap-fixes-against-v3.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (255 commits)
ARM: dts: dra7-evm: Add vtt regulator support
ARM: dts: dra7-evm: Fix spi1 mux documentation
ARM: dts: am43x-epos-evm: Disable QSPI to prevent conflict with GPMC-NAND
ARM: OMAP2+: gpmc: Don't complain if wait pin is used without r/w monitoring
ARM: dts: am43xx-epos-evm: Don't use read/write wait monitoring
ARM: dts: am437x-gp-evm: Don't use read/write wait monitoring
ARM: dts: am437x-gp-evm: Use BCH16 ECC scheme instead of BCH8
ARM: dts: am43x-epos-evm: Use BCH16 ECC scheme instead of BCH8
ARM: dts: am4372: fix USB regs size
ARM: dts: am437x-gp: switch i2c0 to 100KHz
ARM: dts: dra7-evm: Fix 8th NAND partition's name
ARM: dts: dra7-evm: Fix i2c3 pinmux and frequency
Linux 3.17-rc3
...
Signed-off-by: Kevin Hilman <khilman@linaro.org>
- Some documentation sync
- Resource leak in the bt8xx driver
- Again fix the way varargs are used to handle the
optional flags on the gpiod_* accessors. Now hopefully
nailed the entire problem.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=W9J2
-----END PGP SIGNATURE-----
Merge tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fixes from Linus Walleij:
- some documentation sync
- resource leak in the bt8xx driver
- again fix the way varargs are used to handle the optional flags on
the gpiod_* accessors. Now hopefully nailed the entire problem.
* tag 'gpio-v3.17-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: move varargs hack outside #ifdef GPIOLIB
gpio: bt8xx: fix release of managed resources
Documentation: gpio: documentation for optional getters functions
* Enable Armadillo 800 EVA board in multiplatform defconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=FiGM
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Renesas ARM Based SoC Defconfig Updates for v3.18" from Simon Horman:
Third Round of Renesas ARM Based SoC Defconfig Updates for v3.18
* Enable Armadillo 800 EVA board in multiplatform defconfig
Second Round Of Renesas ARM Based SoC Defconfig Updates For v3.18
* Do not disable SUSPEND in Bockw defconfig
- Suspend to ram is now supported
Renesas ARM Based SoC Defconfig Updates for v3.18
* Enable initrd in shmobile defconfig
* Enable missing hardware support in shmobile and several board defconfigs
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-defconfig3-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable Armadillo 800 EVA board in multiplatform defconfig
ARM: shmobile: bockw: Do not disable SUSPEND in defconfig
ARM: shmobile: defconfig: enable initrd
ARM: shmobile: marzen_defconfig: Enable missing hardware support
ARM: shmobile: lager_defconfig: Enable missing hardware support
ARM: shmobile: kzm9g_defconfig: Enable missing hardware support
ARM: shmobile: koelsch_defconfig: Enable missing hardware support
ARM: shmobile: bockw_defconfig: Enable missing hardware support
ARM: shmobile: ape6evm_defconfig: Enable missing hardware support
ARM: shmobile: shmobile_defconfig: Enable missing hardware support
When we're debugging hard-to-reproduce and time-sensitive
use cases, printk() poses too much overhead. That's when
the kernel's tracing infrastructure comes into play.
This patch implements a few initial tracepoints for the
dwc3 driver. More traces can be added as necessary in order
to ease the task of debugging dwc3.
Reviewed-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
* Update name of "R-Car M2-W" SoC (previously there was no "-W")
* Consolidate Legacy SH_CLK_CPG and CPU_V7 Kconfig
* Only select PM_RMOBILE for legacy case
* Cleanup pm-rcar.o and pm-rmobile.o build using Kconfig
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=dolQ
-----END PGP SIGNATURE-----
Merge tag 'renesas-kconfig-cleanups-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/cleanup
Pull "Renesas ARM Based SoC Kconfig Cleanups for v3.18" from Simon Horman:
* Update name of "R-Car M2-W" SoC (previously there was no "-W")
* Consolidate Legacy SH_CLK_CPG and CPU_V7 Kconfig
* Only select PM_RMOBILE for legacy case
* Cleanup pm-rcar.o and pm-rmobile.o build using Kconfig
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-kconfig-cleanups-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: r8a7791 is now called "R-Car M2-W"
ARM: shmobile: Consolidate Legacy SH_CLK_CPG Kconfig
ARM: shmobile: Consolidate Legacy CPU_V7 Kconfig
ARM: shmobile: Only select PM_RMOBILE for legacy case
ARM: shmobile: Cleanup pm-rmobile.o build using Kconfig
ARM: shmobile: Cleanup pm-rcar.o build using Kconfig
ARM: shmobile: Introduce a Kconfig entry for R-Car Gen2
ARM: shmobile: Introduce a Kconfig entry for R-Car Gen1
ARM: shmobile: Introduce a Kconfig entry for R-Mobile
Includes an update to 3.17-rc2 to avoid a dependency
Those functions are only using within debugging
messages, grouping them into debug.h makes sense.
While at that, also add missing multiple inclusion
guard.
Signed-off-by: Felipe Balbi <balbi@ti.com>
* Remove genmai_defconfig from MAINTAINERS
genmai_defconfig was removed in v3.17-rc1.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=UmXj
-----END PGP SIGNATURE-----
Merge tag 'renesas-maintainers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/fixes-non-critical
Merge "Renesas ARM Based SoC Maintainers Updates for v3.18" from Simon Horman:
* Remove genmai_defconfig from MAINTAINERS
genmai_defconfig was removed in v3.17-rc1.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-maintainers-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Remove genmai_defconfig from MAINTAINERS
After commit 2ec2a8be (usb: dwc3: gadget:
always enable IOC on bulk/interrupt transfers)
we created a situation where it was possible to
hang a bulk/interrupt endpoint if we had more
than one pending request in our queue and they
were both started with a single Start Transfer
command.
The problems triggers because we had not enabled
Transfer In Progress event for those endpoints
and we were not able to process early giveback
of requests completed without LST bit set.
Fix the problem by finally enabling Xfer In Progress
event for all endpoint types, except control.
Fixes: 2ec2a8be (usb: dwc3: gadget: always
enable IOC on bulk/interrupt transfers)
Cc: <stable@vger.kernel.org> # v3.14+
Reported-by: Pratyush Anand <pratyush.anand@st.com>
Signed-off-by: Felipe Balbi <balbi@ti.com>
A device is tied to an iommu through its archdata field. The archdata
is allocated on the fly for DT-based devices automatically through the
.add_device iommu ops. The current logic incorrectly assigned the name
of the IOMMU user device, instead of the name of the IOMMU device as
required by the attach logic. Fix this issue so that DT-based devices
can attach successfully to an IOMMU domain.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Any device requiring to be attached to an iommu_domain must have
valid archdata containing the necessary iommu information, which
is SoC-specific. Add a check in the omap_iommu_attach_dev to make
sure that the device has valid archdata before accessing
different SoC-specific fields of the archdata. This prevents a
NULL pointer dereference on any misconfigured devices.
Signed-off-by: Suman Anna <s-anna@ti.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
* acpica:
ACPICA: ACPI 5.1: Add support for runtime validation of _DSD package.
* acpi-processor:
ACPI / cpuidle: fix deadlock between cpuidle_lock and cpu_hotplug.lock
* acpi-scan:
ACPI / scan: not cache _SUN value in struct acpi_device_pnp
These two typos were introduced in commit 1425052097 ("gpio: add IRQ
chip helpers in gpiolib").
The correct symbol name is CONFIG_GPIOLIB_IRQCHIP.
[jkosina@suse.cz: add changelog]
Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
commit "mac80211: disable 40MHz support in case of 20MHz AP"
broke working VHT in 20Mhz with APs like Netgear R6300v2 which
do not publish support for 40Mhz but allow use of VHT in 20Mhz.
The break is because VHT is disabled once no HT cap doesn't indicate
support for 40Mhz. This causes the assoc request to be sent without
any VHT IE and the association is only HT due to this.
For more details check out commit 4a817aa7
"mac80211: allow VHT with peers not capable of 40MHz"
Fixes: 53b954ee4a ("mac80211: disable 40MHz support in case of 20MHz AP")
Signed-off-by: Eyal Shapira <eyalx.shapira@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Extend mac80211 set_coverage_class API in order to enable ACK timeout
estimation algorithm (dynack) passing coverage class equals to -1
to lower drivers. Synchronize set_coverage_class routine signature with
mac80211 function pointer for p54, ath9k, ath9k_htc and ath5k drivers.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Enable ACK timeout estimation algorithm (dynack) using mac80211
set_coverage_class API. Dynack is activated passing coverage class equals to -1
to lower drivers and it is automatically disabled setting valid value for
coverage class.
Define NL80211_ATTR_WIPHY_DYN_ACK flag attribute to enable dynack from
userspace. In order to activate dynack NL80211_FEATURE_ACKTO_ESTIMATION feature
flag must be set by lower drivers to indicate dynack capability.
Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
If the remaining time in the current roc is not long
enough, mac80211 adds the new roc right after it
(if they have similar params).
However, in case of multiple rocs, the "next roc"
is not considered, resulting in multiple rocs,
each one with its own duration.
Refactor the code a bit and consider the next roc,
so a single max roc will be used instead of
multiple rocs (which might last much longer).
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The new duration (remaining duration after the current
ROC ends) was calculated but not used, making the
optimization worthless.
Signed-off-by: Eliad Peller <eliadx.peller@intel.com>
Reviewed-by: Ilan Peer <ilan.peer@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The regdom intersection code simply tries intersecting
each rule of the source with each rule of the target.
Since the resulting intersections are not observed
as a whole, this can result in multiple overlapping/duplicate
entries.
Make the rule addition a bit more smarter, by looking
for rules that can be contained within other rules,
and adding only extended ones.
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
In case of a RRM-supporting connection, in the association request
frame: set the RRM capability flag, and add the required IEs.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add a flag attribute to use in associations, for tagging the target
connection as supporting RRM. It is the responsibility of upper
layers to set this flag only if both the underlying device, and the
target network indeed support RRM.
To be used in ASSOCIATE and CONNECT commands.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Radio Resource Measurement (RRM) is a bundle of features which will
require the entire stack to participate.
In this patch, the driver is given the opportunity to advertise the
device's support for these RRM-related features, using feature flags:
1. Support for Quiet IEs.
2. Support for adding DS Parameter Set IE to probe requests.
3. Support for adding WFA TPC Report IE to probe requests.
4. Support for inserting tx power value to tx-ed packets at a fixed
offset. This is used in action frames, such as RRM's Link
Measurement Report, where the actual tx power should be reported
in the frame.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The function description claimed that on error the skb isn't
freed even though it is, and stated return values that are
different than what really happens in the code.
Signed-off-by: Liad Kaufman <liad.kaufman@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
