The WLAN device may exist yet not be usable. This can happen
when the WLAN device is controllable by both the host and
some platform internal component.
We need some arbritration that is vendor specific, but when
the device is not available for the host, we need to reflect
this state towards the user space.
Add a reason field to the rfkill object (and event) so that
userspace can know why the device is in rfkill: because some
other platform component currently owns the device, or
because the actual hw rfkill signal is asserted.
Capable userspace can now determine the reason for the rfkill
and possibly do some negotiation on a side band channel using
a proprietary protocol to gain ownership on the device in case
the device is owned by some other component. When the host
gains ownership on the device, the kernel can remove the
RFKILL_HARD_BLOCK_NOT_OWNER reason and the hw rfkill state
will be off. Then, the userspace can bring the device up and
start normal operation.
The rfkill_event structure is enlarged to include the additional
byte, it is now 9 bytes long. Old user space will ask to read
only 8 bytes so that the kernel can know not to feed them with
more data. When the user space writes 8 bytes, new kernels will
just read what is present in the file descriptor. This new byte
is read only from the userspace standpoint anyway.
If a new user space uses an old kernel, it'll ask to read 9 bytes
but will get only 8, and it'll know that it didn't get the new
state. When it'll write 9 bytes, the kernel will again ignore
this new byte which is read only from the userspace standpoint.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Link: https://lore.kernel.org/r/20201104134641.28816-1-emmanuel.grumbach@intel.com
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Saeed Mahameed says:
====================
mlx5-next auxbus support
This pull request is targeting net-next and rdma-next branches.
This series provides mlx5 support for auxiliary bus devices.
It starts with a merge commit of tag 'auxbus-5.11-rc1' from
gregkh/driver-core into mlx5-next, then the mlx5 patches that will convert
mlx5 ulp devices (netdev, rdma, vdpa) to use the proper auxbus
infrastructure instead of the internal mlx5 device and interface management
implementation, which Leon is deleting at the end of this patchset.
Link: https://lore.kernel.org/alsa-devel/20201026111849.1035786-1-leon@kernel.org/
Thanks to everyone for the joint effort !
* 'mlx5-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
RDMA/mlx5: Remove IB representors dead code
net/mlx5: Simplify eswitch mode check
net/mlx5: Delete custom device management logic
RDMA/mlx5: Convert mlx5_ib to use auxiliary bus
net/mlx5e: Connect ethernet part to auxiliary bus
vdpa/mlx5: Connect mlx5_vdpa to auxiliary bus
net/mlx5: Register mlx5 devices to auxiliary virtual bus
vdpa/mlx5: Make hardware definitions visible to all mlx5 devices
net/mlx5_core: Clean driver version and name
net/mlx5: Properly convey driver version to firmware
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
====================
Link: https://lore.kernel.org/r/20201207053349.402772-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
All usages of the definition MAX_MSIX_P_PORT were removed.
It's not in use anymore. Remove it.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Moshe Shemesh <moshe@mellanox.com>
Link: https://lore.kernel.org/r/20201206091254.12476-1-tariqt@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Provide mlx5_core device instead of "priv" pointer while checking
eswith mode.
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
After conversion to use auxiliary bus, all custom device management is
not needed anymore, delete it.
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJfyTQyAAoJEG4XJFUm622bCdcIAIyVnqdW7pnoDmWIyQmAEnD9
vGARkzghPHXnufpOzohyDdxT12X9klhrxSVIgzEgH1/pl3i1PpnF6KXyGFCC44Lw
wrLXhQygPzmIW1IZtJJE3G72WExXoRjWx6LD1I7C7oEIduqFixXADmK2tKzFp795
Jxum+sOeT6+Dk1OvO/fIroBHX73mRE9zAuiTIMpt2G1j8uXs9QVfcTbTrUshLASN
0sX9J6JutltBuM4G7+bFpVzKnLnlQ7ebUaF6nvTCQsgHWZwkS7yAubSWX9sFohbR
UXgQHNE83s/esOg7nBxAfqTKP8mbxsobmxZtxE5GR5vFY5FJDxqP9Zc2KzPp39w=
=CbX/
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for v5.11
First set of patches for v5.11. rtw88 getting improvements to work
better with Bluetooth and other driver also getting some new features.
mhi-ath11k-immutable branch was pulled from mhi tree to avoid
conflicts with mhi tree.
Major changes:
rtw88
* major bluetooth co-existance improvements
wilc1000
* Wi-Fi Multimedia (WMM) support
ath11k
* Fast Initial Link Setup (FILS) discovery and unsolicited broadcast
probe response support
* qcom,ath11k-calibration-variant Device Tree setting
* cold boot calibration support
* new DFS region: JP
wnc36xx
* enable connection monitoring and keepalive in firmware
ath10k
* firmware IRAM recovery feature
mhi
* merge mhi-ath11k-immutable branch to make MHI API change go smoothly
* tag 'wireless-drivers-next-2020-12-03' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next: (180 commits)
wl1251: remove trailing semicolon in macro definition
airo: remove trailing semicolon in macro definition
wilc1000: added queue support for WMM
wilc1000: call complete() for failure in wilc_wlan_txq_add_cfg_pkt()
wilc1000: free resource in wilc_wlan_txq_add_mgmt_pkt() for failure path
wilc1000: free resource in wilc_wlan_txq_add_net_pkt() for failure path
wilc1000: added 'ndo_set_mac_address' callback support
brcmfmac: expose firmware config files through modinfo
wlcore: Switch to using the new API kobj_to_dev()
rtw88: coex: add feature to enhance HID coexistence performance
rtw88: coex: upgrade coexistence A2DP mechanism
rtw88: coex: add action for coexistence in hardware initial
rtw88: coex: add function to avoid cck lock
rtw88: coex: change the coexistence mechanism for WLAN connected
rtw88: coex: change the coexistence mechanism for HID
rtw88: coex: update AFH information while in free-run mode
rtw88: coex: update the mechanism for A2DP + PAN
rtw88: coex: add debug message
rtw88: coex: run coexistence when WLAN entering/leaving LPS
Revert "rtl8xxxu: Add Buffalo WI-U3-866D to list of supported devices"
...
====================
Link: https://lore.kernel.org/r/20201203185732.9CFA5C433ED@smtp.codeaurora.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Alexei Starovoitov says:
====================
pull-request: bpf-next 2020-12-03
The main changes are:
1) Support BTF in kernel modules, from Andrii.
2) Introduce preferred busy-polling, from Björn.
3) bpf_ima_inode_hash() and bpf_bprm_opts_set() helpers, from KP Singh.
4) Memcg-based memory accounting for bpf objects, from Roman.
5) Allow bpf_{s,g}etsockopt from cgroup bind{4,6} hooks, from Stanislav.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (118 commits)
selftests/bpf: Fix invalid use of strncat in test_sockmap
libbpf: Use memcpy instead of strncpy to please GCC
selftests/bpf: Add fentry/fexit/fmod_ret selftest for kernel module
selftests/bpf: Add tp_btf CO-RE reloc test for modules
libbpf: Support attachment of BPF tracing programs to kernel modules
libbpf: Factor out low-level BPF program loading helper
bpf: Allow to specify kernel module BTFs when attaching BPF programs
bpf: Remove hard-coded btf_vmlinux assumption from BPF verifier
selftests/bpf: Add CO-RE relocs selftest relying on kernel module BTF
selftests/bpf: Add support for marking sub-tests as skipped
selftests/bpf: Add bpf_testmod kernel module for testing
libbpf: Add kernel module BTF support for CO-RE relocations
libbpf: Refactor CO-RE relocs to not assume a single BTF object
libbpf: Add internal helper to load BTF data by FD
bpf: Keep module's btf_data_size intact after load
bpf: Fix bpf_put_raw_tracepoint()'s use of __module_address()
selftests/bpf: Add Userspace tests for TCP_WINDOW_CLAMP
bpf: Adds support for setting window clamp
samples/bpf: Fix spelling mistake "recieving" -> "receiving"
bpf: Fix cold build of test_progs-no_alu32
...
====================
Link: https://lore.kernel.org/r/20201204021936.85653-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Move mlx5_vdpa IFC header file to the general include folder, so
mlx5_core will be able to reuse it to check if VDPA is supported
prior to creating an auxiliary device.
As part of this move, update the header file name to mlx5 general
naming scheme.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Remove exposed driver version as it was done in other drivers,
so module version will work correctly by displaying the kernel
version for which it is compiled.
And move mlx5_core module name to general include, so auxiliary drivers
will be able to use it as a basis for a name in their device ID tables.
Reviewed-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Roi Dayan <roid@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-----BEGIN PGP SIGNATURE-----
iG0EABECAC0WIQT0tgzFv3jCIUoxPcsxR9QN2y37KQUCX8oseA8cZ3JlZ0Brcm9h
aC5jb20ACgkQMUfUDdst+ylqGQCdF2TND5jjcETWHIrunPAX6iEDLecAnjyIMc4q
cIr5piwCq+m6/S2gSCpA
=t7EL
-----END PGP SIGNATURE-----
Merge tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core into mlx5-next
Auxiliary Bus support tag for 5.11-rc1
This is a signed tag for other subsystems to be able to pull in the
auxiliary bus support into their trees for the 5.11-rc1 merge.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
* tag 'auxbus-5.11-rc1' of https://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
driver core: auxiliary bus: minor coding style tweaks
driver core: auxiliary bus: make remove function return void
driver core: auxiliary bus: move slab.h from include file
Add auxiliary bus support
For some reason, the original aux bus patch had some really long lines
in a few places, probably due to it being a very long-lived patch in
development by many different people. Fix that up so that the two files
all have the same length lines and function formatting styles.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8oiSFTpYHw1xE/o@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's an effort to move the remove() callback in the driver core to
not return an int, as nothing can be done if this function fails. To
make that effort easier, make the aux bus remove function void to start
with so that no users have to be changed sometime in the future.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8ohB1ks1NK7kPop@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No need to include slab.h in include/linux/auxiliary_bus.h, as it is not
needed there. Move it to drivers/base/auxiliary.c instead.
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: Dave Ertman <david.m.ertman@intel.com>
Cc: Fred Oh <fred.oh@linux.intel.com>
Cc: Kiran Patil <kiran.patil@intel.com>
Cc: Leon Romanovsky <leonro@nvidia.com>
Cc: Martin Habets <mhabets@solarflare.com>
Cc: Parav Pandit <parav@mellanox.com>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Cc: Shiraz Saleem <shiraz.saleem@intel.com>
Link: https://lore.kernel.org/r/X8og8xi3WkoYXet9@kroah.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add support for the Auxiliary Bus, auxiliary_device and auxiliary_driver.
It enables drivers to create an auxiliary_device and bind an
auxiliary_driver to it.
The bus supports probe/remove shutdown and suspend/resume callbacks.
Each auxiliary_device has a unique string based id; driver binds to
an auxiliary_device based on this id through the bus.
Co-developed-by: Kiran Patil <kiran.patil@intel.com>
Co-developed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Co-developed-by: Fred Oh <fred.oh@linux.intel.com>
Co-developed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Kiran Patil <kiran.patil@intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Fred Oh <fred.oh@linux.intel.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Dave Ertman <david.m.ertman@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Dan Williams <dan.j.williams@intel.com>
Reviewed-by: Martin Habets <mhabets@solarflare.com>
Link: https://lore.kernel.org/r/20201113161859.1775473-2-david.m.ertman@intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Link: https://lore.kernel.org/r/160695681289.505290.8978295443574440604.stgit@dwillia2-desk3.amr.corp.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add ability for user-space programs to specify non-vmlinux BTF when attaching
BTF-powered BPF programs: raw_tp, fentry/fexit/fmod_ret, LSM, etc. For this,
attach_prog_fd (now with the alias name attach_btf_obj_fd) should specify FD
of a module or vmlinux BTF object. For backwards compatibility reasons,
0 denotes vmlinux BTF. Only kernel BTF (vmlinux or module) can be specified.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-11-andrii@kernel.org
Remove a permeating assumption thoughout BPF verifier of vmlinux BTF. Instead,
wherever BTF type IDs are involved, also track the instance of struct btf that
goes along with the type ID. This allows to gradually add support for kernel
module BTFs and using/tracking module types across BPF helper calls and
registers.
This patch also renames btf_id() function to btf_obj_id() to minimize naming
clash with using btf_id to denote BTF *type* ID, rather than BTF *object*'s ID.
Also, altough btf_vmlinux can't get destructed and thus doesn't need
refcounting, module BTFs need that, so apply BTF refcounting universally when
BPF program is using BTF-powered attachment (tp_btf, fentry/fexit, etc). This
makes for simpler clean up code.
Now that BTF type ID is not enough to uniquely identify a BTF type, extend BPF
trampoline key to include BTF object ID. To differentiate that from target
program BPF ID, set 31st bit of type ID. BTF type IDs (at least currently) are
not allowed to take full 32 bits, so there is no danger of confusing that bit
with a valid BTF type ID.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201203204634.1325171-10-andrii@kernel.org
A followup change to tcp_request_sock_op would have to drop the 'const'
qualifier from the 'route_req' function as the
'security_inet_conn_request' call is moved there - and that function
expects a 'struct sock *'.
However, it turns out its also possible to add a const qualifier to
security_inet_conn_request instead.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: James Morris <jamorris@linux.microsoft.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
STEs format for Connect-X5 and Connect-X6DX different. Currently, on
Connext-X6DX the SW steering would break at some point when building STEs
w/o giving a proper error message. Fix this by checking the STE format of
the current device when initializing domain: add mlx5_ifc definitions for
Connect-X6DX SW steering, read FW capability to get the current format
version, and check this version when domain is being created.
Fixes: 26d688e33f ("net/mlx5: DR, Add Steering entry (STE) utilities")
Signed-off-by: Yevgeny Kliteynik <kliteyn@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Background:
Broadcast and multicast packages are enqueued for later processing.
This queue was previously hardcoded to 1000.
This proved insufficient for handling very high packet rates.
This resulted in packet drops for multicast.
While at the same time unicast worked fine.
The change:
This patch make the queue length adjustable to accommodate
for environments with very high multicast packet rate.
But still keeps the default value of 1000 unless specified.
The queue length is specified as a request per macvlan
using the IFLA_MACVLAN_BC_QUEUE_LEN parameter.
The actual used queue length will then be the maximum of
any macvlan connected to the same port. The actual used
queue length for the port can be retrieved (read only)
by the IFLA_MACVLAN_BC_QUEUE_LEN_USED parameter for verification.
This will be followed up by a patch to iproute2
in order to adjust the parameter from userspace.
Signed-off-by: Thomas Karlsson <thomas.karlsson@paneda.se>
Link: https://lore.kernel.org/r/dd4673b2-7eab-edda-6815-85c67ce87f63@paneda.se
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Do not use rlimit-based memory accounting for bpf progs. It has been
replaced with memcg-based memory accounting.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-34-guro@fb.com
Remove rlimit-based accounting infrastructure code, which is not used
anymore.
To provide a backward compatibility, use an approximation of the
bpf map memory footprint as a "memlock" value, available to a user
via map info. The approximation is based on the maximal number of
elements and key and value sizes.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-33-guro@fb.com
Bpf maps can be updated from an interrupt context and in such
case there is no process which can be charged. It makes the memory
accounting of bpf maps non-trivial.
Fortunately, after commit 4127c6504f ("mm: kmem: enable kernel
memcg accounting from interrupt contexts") and commit b87d8cefe4
("mm, memcg: rework remote charging API to support nesting")
it's finally possible.
To make the ownership model simple and consistent, when the map
is created, the memory cgroup of the current process is recorded.
All subsequent allocations related to the bpf map are charged to
the same memory cgroup. It includes allocations made by any processes
(even if they do belong to a different cgroup) and from interrupts.
This commit introduces 3 new helpers, which will be used by following
commits to enable the accounting of bpf maps memory:
- bpf_map_kmalloc_node()
- bpf_map_kzalloc()
- bpf_map_alloc_percpu()
They are wrapping popular memory allocation functions. They set
the active memory cgroup to the map's memory cgroup and add
__GFP_ACCOUNT to the passed gfp flags. Then they call into
the corresponding memory allocation function and restore
the original active memory cgroup.
These helpers are supposed to use everywhere except the map creation
path. During the map creation when the map structure is allocated by
itself, it cannot be passed to those helpers. In those cases default
memory allocation function will be used with the __GFP_ACCOUNT flag.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201201215900.3569844-7-guro@fb.com
PageKmemcg flag is currently defined as a page type (like buddy, offline,
table and guard). Semantically it means that the page was accounted as a
kernel memory by the page allocator and has to be uncharged on the
release.
As a side effect of defining the flag as a page type, the accounted page
can't be mapped to userspace (look at page_has_type() and comments above).
In particular, this blocks the accounting of vmalloc-backed memory used
by some bpf maps, because these maps do map the memory to userspace.
One option is to fix it by complicating the access to page->mapcount,
which provides some free bits for page->page_type.
But it's way better to move this flag into page->memcg_data flags.
Indeed, the flag makes no sense without enabled memory cgroups and memory
cgroup pointer set in particular.
This commit replaces PageKmemcg() and __SetPageKmemcg() with
PageMemcgKmem() and an open-coded OR operation setting the memcg pointer
with the MEMCG_DATA_KMEM bit. __ClearPageKmemcg() can be simple deleted,
as the whole memcg_data is zeroed at once.
As a bonus, on !CONFIG_MEMCG build the PageMemcgKmem() check will be
compiled out.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-5-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-5-guro@fb.com
The lowest bit in page->memcg_data is used to distinguish between struct
memory_cgroup pointer and a pointer to a objcgs array. All checks and
modifications of this bit are open-coded.
Let's formalize it using page memcg flags, defined in enum
page_memcg_data_flags.
Additional flags might be added later.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-4-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-4-guro@fb.com
To gather all direct accesses to struct page's memcg_data field in one
place, let's introduce 3 new helpers to use in the slab accounting code:
struct obj_cgroup **page_objcgs(struct page *page);
struct obj_cgroup **page_objcgs_check(struct page *page);
bool set_page_objcgs(struct page *page, struct obj_cgroup **objcgs);
They are similar to the corresponding API for generic pages, except that
the setter can return false, indicating that the value has been already
set from a different thread.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Link: https://lkml.kernel.org/r/20201027001657.3398190-3-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-3-guro@fb.com
Patch series "mm: allow mapping accounted kernel pages to userspace", v6.
Currently a non-slab kernel page which has been charged to a memory cgroup
can't be mapped to userspace. The underlying reason is simple: PageKmemcg
flag is defined as a page type (like buddy, offline, etc), so it takes a
bit from a page->mapped counter. Pages with a type set can't be mapped to
userspace.
But in general the kmemcg flag has nothing to do with mapping to
userspace. It only means that the page has been accounted by the page
allocator, so it has to be properly uncharged on release.
Some bpf maps are mapping the vmalloc-based memory to userspace, and their
memory can't be accounted because of this implementation detail.
This patchset removes this limitation by moving the PageKmemcg flag into
one of the free bits of the page->mem_cgroup pointer. Also it formalizes
accesses to the page->mem_cgroup and page->obj_cgroups using new helpers,
adds several checks and removes a couple of obsolete functions. As the
result the code became more robust with fewer open-coded bit tricks.
This patch (of 4):
Currently there are many open-coded reads of the page->mem_cgroup pointer,
as well as a couple of read helpers, which are barely used.
It creates an obstacle on a way to reuse some bits of the pointer for
storing additional bits of information. In fact, we already do this for
slab pages, where the last bit indicates that a pointer has an attached
vector of objcg pointers instead of a regular memcg pointer.
This commits uses 2 existing helpers and introduces a new helper to
converts all read sides to calls of these helpers:
struct mem_cgroup *page_memcg(struct page *page);
struct mem_cgroup *page_memcg_rcu(struct page *page);
struct mem_cgroup *page_memcg_check(struct page *page);
page_memcg_check() is intended to be used in cases when the page can be a
slab page and have a memcg pointer pointing at objcg vector. It does
check the lowest bit, and if set, returns NULL. page_memcg() contains a
VM_BUG_ON_PAGE() check for the page not being a slab page.
To make sure nobody uses a direct access, struct page's
mem_cgroup/obj_cgroups is converted to unsigned long memcg_data.
Signed-off-by: Roman Gushchin <guro@fb.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Acked-by: Michal Hocko <mhocko@suse.com>
Link: https://lkml.kernel.org/r/20201027001657.3398190-1-guro@fb.com
Link: https://lkml.kernel.org/r/20201027001657.3398190-2-guro@fb.com
Link: https://lore.kernel.org/bpf/20201201215900.3569844-2-guro@fb.com
Low level mlx5 updates required by both netdev and rdma trees:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl/IOZcACgkQSD+KveBX
+j4J8wgAuxwflrYrbCWXV7LE08J7T7ZHRDE+jEbaZ0Zp9mOsYDDpcifpKwy2EVRf
RKcpMYh/GzAljmEpeWIAlMxmlpXhKWXTDruWCx73r1jvdXf/RU24/zQHa6BjeiDo
rMB8bgiW4a66+z4LcN/U6ahbVM5gScBNEt2sS1OIi9ZInngGVo9FgfhYMpERPNcH
3+mcHulCnGBNbbLwoTllOcgbxexn+xoByukg5Z0ddBJp007DMjzBIWDpDS0y2HaT
jGo1LYONgRc3zoGVmdeu9F+tSsWBIgsaiyGxKj1T/8sZUaNz2TKj9VOiYIj9BLff
cp6GRc88k7HWA4tImSHQiLbK6cx+yA==
=mjvI
-----END PGP SIGNATURE-----
Merge tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux
Saeed Mahameed says:
====================
mlx5-next-2020-12-02
Low level mlx5 updates required by both netdev and rdma trees.
* tag 'mlx5-next-2020-12-02' of git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux:
net/mlx5: Treat host PF vport as other (non eswitch manager) vport
net/mlx5: Enable host PF HCA after eswitch is initialized
net/mlx5: Rename peer_pf to host_pf
net/mlx5: Make API mlx5_core_is_ecpf accept const pointer
net/mlx5: Export steering related functions
net/mlx5: Expose other function ifc bits
net/mlx5: Expose IP-in-IP TX and RX capability bits
net/mlx5: Update the hardware interface definition for vhca state
net/mlx5: Update the list of the PCI supported devices
net/mlx5: Avoid exposing driver internal command helpers
net/mlx5: Add ts_cqe_to_dest_cqn related bits
net/mlx5: Add misc4 to mlx5_ifc_fte_match_param_bits
net/mlx5: Check dr mask size against mlx5_match_param size
net/mlx5: Add sampler destination type
net/mlx5: Add sample offload hardware bits and structures
====================
Link: https://lore.kernel.org/r/20201203011010.213440-1-saeedm@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
I have to now lock/unlock socket for the bind hook execution.
That shouldn't cause any overhead because the socket is unbound
and shouldn't receive any traffic.
Signed-off-by: Stanislav Fomichev <sdf@google.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Andrey Ignatov <rdna@fb.com>
Link: https://lore.kernel.org/bpf/20201202172516.3483656-3-sdf@google.com
The last user of the RTNL brother of dev_getfirstbyhwtype (the latter
being synchronized under RCU) has been deleted in commit b4db2b35fc
("afs: Use core kernel UUID generation").
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: David Howells <dhowells@redhat.com>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://lore.kernel.org/r/20201129200550.2433401-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCX8ZzghQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qg0JAQCII1bDQyF3APLlNFRqfHf3bTo7Zl5z
WaUd1Cd7JkY+WAD/eF1dWjN0JRtfU+oRlk6UZ4oNmp8WMJvQ7oV26ub2egE=
=lts8
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
- Use correct timestamp variable for ring buffer write stamp update
- Fix up before stamp and write stamp when crossing ring buffer sub
buffers
- Keep a zero delta in ring buffer in slow path if cmpxchg fails
- Fix trace_printk static buffer for archs that care
- Fix ftrace record accounting for ftrace ops with trampolines
- Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
- Remove WARN_ON in hwlat tracer that triggers on something that is OK
- Make "my_tramp" trampoline in ftrace direct sample code global
- Fixes in the bootconfig tool for better alignment management
* tag 'trace-v5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
ring-buffer: Always check to put back before stamp when crossing pages
ftrace: Fix DYNAMIC_FTRACE_WITH_DIRECT_CALLS dependency
ftrace: Fix updating FTRACE_FL_TRAMP
tracing: Fix alignment of static buffer
tracing: Remove WARN_ON in start_thread()
samples/ftrace: Mark my_tramp[12]? global
ring-buffer: Set the right timestamp in the slow path of __rb_reserve_next()
ring-buffer: Update write stamp with the correct ts
docs: bootconfig: Update file format on initrd image
tools/bootconfig: Align the bootconfig applied initrd image size to 4
tools/bootconfig: Fix to check the write failure correctly
tools/bootconfig: Fix errno reference after printf()
It turns out that usage of skb extensions can cause memory leaks. Ido
Schimmel reported: "[...] there are instances that blindly overwrite
'skb->extensions' by invoking skb_copy_header() after __alloc_skb()."
Therefore, give up on using skb extensions for KCOV handle, and instead
directly store kcov_handle in sk_buff.
Fixes: 6370cc3bbd ("net: add kcov handle to skb extensions")
Fixes: 85ce50d337 ("net: kcov: don't select SKB_EXTENSIONS when there is no NET")
Fixes: 97f53a08cb ("net: linux/skbuff.h: combine SKB_EXTENSIONS + KCOV handling")
Link: https://lore.kernel.org/linux-wireless/20201121160941.GA485907@shredder.lan/
Reported-by: Ido Schimmel <idosch@idosch.org>
Signed-off-by: Marco Elver <elver@google.com>
Link: https://lore.kernel.org/r/20201125224840.2014773-1-elver@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The existing busy-polling mode, enabled by the SO_BUSY_POLL socket
option or system-wide using the /proc/sys/net/core/busy_read knob, is
an opportunistic. That means that if the NAPI context is not
scheduled, it will poll it. If, after busy-polling, the budget is
exceeded the busy-polling logic will schedule the NAPI onto the
regular softirq handling.
One implication of the behavior above is that a busy/heavy loaded NAPI
context will never enter/allow for busy-polling. Some applications
prefer that most NAPI processing would be done by busy-polling.
This series adds a new socket option, SO_PREFER_BUSY_POLL, that works
in concert with the napi_defer_hard_irqs and gro_flush_timeout
knobs. The napi_defer_hard_irqs and gro_flush_timeout knobs were
introduced in commit 6f8b12d661 ("net: napi: add hard irqs deferral
feature"), and allows for a user to defer interrupts to be enabled and
instead schedule the NAPI context from a watchdog timer. When a user
enables the SO_PREFER_BUSY_POLL, again with the other knobs enabled,
and the NAPI context is being processed by a softirq, the softirq NAPI
processing will exit early to allow the busy-polling to be performed.
If the application stops performing busy-polling via a system call,
the watchdog timer defined by gro_flush_timeout will timeout, and
regular softirq handling will resume.
In summary; Heavy traffic applications that prefer busy-polling over
softirq processing should use this option.
Example usage:
$ echo 2 | sudo tee /sys/class/net/ens785f1/napi_defer_hard_irqs
$ echo 200000 | sudo tee /sys/class/net/ens785f1/gro_flush_timeout
Note that the timeout should be larger than the userspace processing
window, otherwise the watchdog will timeout and fall back to regular
softirq processing.
Enable the SO_BUSY_POLL/SO_PREFER_BUSY_POLL options on your socket.
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Link: https://lore.kernel.org/bpf/20201130185205.196029-2-bjorn.topel@gmail.com
Daniel Borkmann says:
====================
pull-request: bpf 2020-11-28
1) Do not reference the skb for xsk's generic TX side since when looped
back into RX it might crash in generic XDP, from Björn Töpel.
2) Fix umem cleanup on a partially set up xsk socket when being destroyed,
from Magnus Karlsson.
3) Fix an incorrect netdev reference count when failing xsk_bind() operation,
from Marek Majtyka.
4) Fix bpftool to set an error code on failed calloc() in build_btf_type_table(),
from Zhen Lei.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf: Add MAINTAINERS entry for BPF LSM
bpftool: Fix error return value in build_btf_type_table
net, xsk: Avoid taking multiple skbuff references
xsk: Fix incorrect netdev reference count
xsk: Fix umem cleanup bug at socket destruct
MAINTAINERS: Update XDP and AF_XDP entries
====================
Link: https://lore.kernel.org/r/20201128005104.1205-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Trivial conflict in CAN, keep the net-next + the byteswap wrapper.
Conflicts:
drivers/net/can/usb/gs_usb.c
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAl/BZx4ACgkQmmx57+YA
GNnSPA/9HK0dwaGuXHRxKpt2ShHt5kOmixlmRJszYmuSIJde945EJNTP/+2l2Qs2
TDXmOU8pdZSAZX2EHLLEksNsnhUoTBWzsn4WxHRTNVc2cYuHHA6PKMdAPV136ag/
U0gnC7eCYKCDM3A1A/G4437PDI3vfm0Wzo6Biikxwhi861bshxjVs3DapDQw5+Zn
bOS8CCNpmwpDC26ZAfIY8es32Hg063GhdJXQ01uqkaZLJdRn7ui6bkv18vi+b3gM
QLeaubDT4+oH+HpJJpFZ01iugBFah5iJtg/JtWyap/LJSkelyjU9Gr7qrrpI7M3t
hfDzk7fRjHO1XPn2bDc4InWJEoekE9vde5M0QKn3ID8dFO1M5tNqov2uH40m4fQD
UM7irWe0BmP9Nms5LV7dMWChPn8FUEr34ZYAwF9B+YPL1Ec6GGn8mA/E0Iz8pre0
MUgv5LZ8LYdeYvSSpXrgBkgv2pwni5rTc7/K9KtvGdkLQ3rOuihPBbPyR0YTYa8f
UkboIky80lcx/uyhhu+OxWxe0q+Ug8WF87UkPIDDhsaF9W2DoErIwiCQhqS+AKs4
9DiCBzLgF6mZ11ijK73DtLNBmQnKdssV9Bs5lnOO0XqYdoqiQ5gRJWrixvI0OWSa
WGt66UV481rV/Oxlt1A/1lynYkZU0b121fFFB/EPbuFuUwZu9So=
=xgYa
-----END PGP SIGNATURE-----
Merge tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic
Pull asm-generic fix from Arnd Bergmann:
"Add correct MAX_POSSIBLE_PHYSMEM_BITS setting to asm-generic.
This is a single bugfix for a bug that Stefan Agner found on 32-bit
Arm, but that exists on several other architectures"
* tag 'asm-generic-fixes-5.10-2' of git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic:
arch: pgtable: define MAX_POSSIBLE_PHYSMEM_BITS where needed
Another set of patches for devicetree files and Arm
SoC specific drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including
one regression for the CPSW network driver and a few
runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform,
in particular fixing the MMC device ordering that
recently became nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including
a regression fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the
NXP dpio driver
- A regression fix for a bug caused by an earlier bug
fix in the xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the
NXP LPC32xx platform
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=yGOq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"Another set of patches for devicetree files and Arm SoC specific
drivers:
- A fix for OP-TEE shared memory on non-SMP systems
- multiple code fixes for the OMAP platform, including one regression
for the CPSW network driver and a few runtime warning fixes
- Some DT patches for the Rockchip RK3399 platform, in particular
fixing the MMC device ordering that recently became
nondeterministic with async probe.
- Multiple DT fixes for the Tegra platform, including a regression
fix for suspend/resume on TX2
- A regression fix for a user-triggered fault in the NXP dpio driver
- A regression fix for a bug caused by an earlier bug fix in the
xilinx firmware driver
- Two more DTC warning fixes
- Sylvain Lemieux steps down as maintainer for the NXP LPC32xx
platform"
* tag 'arm-soc-fixes-v5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (24 commits)
arm64: tegra: Fix Tegra234 VDK node names
arm64: tegra: Wrong AON HSP reg property size
arm64: tegra: Fix USB_VBUS_EN0 regulator on Jetson TX1
arm64: tegra: Correct the UART for Jetson Xavier NX
arm64: tegra: Disable the ACONNECT for Jetson TX2
optee: add writeback to valid memory type
firmware: xilinx: Use hash-table for api feature check
firmware: xilinx: Fix SD DLL node reset issue
soc: fsl: dpio: Get the cpumask through cpumask_of(cpu)
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
MAINTAINERS: Remove myself as LPC32xx maintainers
arm64: dts: qcom: clear the warnings caused by empty dma-ranges
arm64: dts: broadcom: clear the warnings caused by empty dma-ranges
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
arm64: dts: rockchip: Reorder LED triggers from mmc devices on rk3399-roc-pc.
arm64: dts: rockchip: Assign a fixed index to mmc devices on rk3399 boards.
arm64: dts: rockchip: Remove system-power-controller from pmic on Odroid Go Advance
arm64: dts: rockchip: fix NanoPi R2S GMAC clock name
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
...
and can subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection
of congestion control
- tcp: fix race condition when creating child sockets from
syncookies on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible
hard header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing
struct slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats
uAPI before it's released
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=1tQm
-----END PGP SIGNATURE-----
Merge tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Networking fixes for 5.10-rc6, including fixes from the WiFi driver,
and CAN subtrees.
Current release - regressions:
- gro_cells: reduce number of synchronize_net() calls
- ch_ktls: release a lock before jumping to an error path
Current release - always broken:
- tcp: Allow full IP tos/IPv6 tclass to be reflected in L3 header
Previous release - regressions:
- net/tls: fix missing received data after fast remote close
- vsock/virtio: discard packets only when socket is really closed
- sock: set sk_err to ee_errno on dequeue from errq
- cxgb4: fix the panic caused by non smac rewrite
Previous release - always broken:
- tcp: fix corner cases around setting ECN with BPF selection of
congestion control
- tcp: fix race condition when creating child sockets from syncookies
on loopback interface
- usbnet: ipheth: fix connectivity with iOS 14
- tun: honor IOCB_NOWAIT flag
- net/packet: fix packet receive on L3 devices without visible hard
header
- devlink: Make sure devlink instance and port are in same net
namespace
- net: openvswitch: fix TTL decrement action netlink message format
- bonding: wait for sysfs kobject destruction before freeing struct
slave
- net: stmmac: fix upstream patch applied to the wrong context
- bnxt_en: fix return value and unwind in probe error paths
Misc:
- devlink: add extra layer of categorization to the reload stats uAPI
before it's released"
* tag 'net-5.10-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (68 commits)
sock: set sk_err to ee_errno on dequeue from errq
mptcp: fix NULL ptr dereference on bad MPJ
net: openvswitch: fix TTL decrement action netlink message format
can: af_can: can_rx_unregister(): remove WARN() statement from list operation sanity check
can: m_can: m_can_dev_setup(): add support for bosch mcan version 3.3.0
can: m_can: fix nominal bitiming tseg2 min for version >= 3.1
can: m_can: m_can_open(): remove IRQF_TRIGGER_FALLING from request_threaded_irq()'s flags
can: mcp251xfd: mcp251xfd_probe(): bail out if no IRQ was given
can: gs_usb: fix endianess problem with candleLight firmware
ch_ktls: lock is not freed
net/tls: Protect from calling tls_dev_del for TLS RX twice
devlink: Make sure devlink instance and port are in same net namespace
devlink: Hold rtnl lock while reading netdev attributes
ptp: clockmatrix: bug fix for idtcm_strverscmp
enetc: Let the hardware auto-advance the taprio base-time of 0
gro_cells: reduce number of synchronize_net() calls
net: stmmac: fix incorrect merge of patch upstream
ipv6: addrlabel: fix possible memory leak in ip6addrlbl_net_init
Documentation: netdev-FAQ: suggest how to post co-dependent series
ibmvnic: enhance resetting status check during module exit
...
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
-----BEGIN PGP SIGNATURE-----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=KSUM
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for various issues noticed during the -rc cycle:
- Earlier omap4 cpuidle fix was incomplete and needs to use a
configured idle state instead
- Fix am4 cpsw driver compatible to avoid invalid resource error
for the legacy driver
- Two kconfig fixes for genpd support that we added for for v5.10
for proper location of the option and adding missing option
- Fix ti-sysc reset status checking on enabling modules to ignore
quirky modules with reset status only usable when the quirk is
activated during reset. Also fix bogus resetdone warning for
cpsw and modules with no sysst register reset status bit
- Suppress a ti-sysc warning for timers reserved as system timers
- Fix the ordering of clocks for dra7 m_can
* tag 'omap-for-v5.10/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: dra76x: m_can: fix order of clocks
bus: ti-sysc: suppress err msg for timers used as clockevent/source
ARM: dts: am437x-l4: fix compatible for cpsw switch dt node
ARM: OMAP2+: Manage MPU state properly for omap_enter_idle_coupled()
bus: ti-sysc: Fix bogus resetdone warning on enable for cpsw
bus: ti-sysc: Fix reset status check for modules with quirks
ARM: OMAP2+: Fix missing select PM_GENERIC_DOMAINS_OF
ARM: OMAP2+: Fix location for select PM_GENERIC_DOMAINS
Link: https://lore.kernel.org/r/pull-1606460270-864284@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When eswitch manager is running on ECPF, host PF should be treated
as non eswitch manager port, similar to other VF vports.
Fail to do so, results in firmware treating PF's vport as ECPF
vport for eswitch ACL tables.
Non zero check to figure out if a given vport is other vport or not
is not sufficient becase PF vport number = 0 on ECPF.
Hence, create esw acl tables with an attribute of other vport.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
To match the hardware spec, rename peer_pf to host_pf.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Subsequent patch implements helper API which has mlx5_core_dev
as const pointer, make its caller API too const *.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Bodong Wang <bodong@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose other function ifc bits to enable setting HCA caps on behalf of
other function.
In addition, expose vhca_resource_manager bit to control whether the
other function functionality is supported by firmware.
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Reviewed-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Expose FW indication that it supports stateless offloads for IP over IP
tunneled packets per direction. In some HW like ConnectX-4 IP-in-IP
support is not symmetric, it supports steering on the inner header but
it doesn't TX-Checksum and TSO. Add IP-in-IP capability per direction to
cover this case as well.
Note: only if both indications are turned on, the global
tunnel_stateless_ip_over_ip is on too.
Signed-off-by: Aya Levin <ayal@nvidia.com>
Reviewed-by: Moshe Shemesh <moshe@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Update the hardware interface definitions to query and modify vhca
state, related EQE and event code.
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
mlx5 command init and cleanup routines are internal to mlx5_core driver.
Hence, avoid exporting them and move their definition to mlx5_core
driver's internal file mlx5_core.h
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Add a bit in HCA capabilities layout to indicate if ts_cqe_to_dest_cqn is
supported.
In addition, add ts_cqe_to_dest_cqn field to SQ context, for driver to
set the actual CQN.
Signed-off-by: Eran Ben Elisha <eranbe@nvidia.com>
Reviewed-by: Tariq Toukan <tariqt@nvidia.com>
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
