Use the interconnects property to hook up the MMC and BPMP to the memory
controller. This is needed to set the correct bus-level DMA mask, which
is a prerequisite for adding IOMMU support.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This adds the memory controller and the embedded external memory
controller found on the Tegra234 SoC.
Signed-off-by: Thierry Reding <treding@nvidia.com>
DMA operations for the Tegra194 Video Image Compositor (VIC) are
coherent and so populate the 'dma-coherent' property.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing interrupts, clocks, clock-names, reset and reset-names
properties for the TSEC blocks found on Tegra210.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB pad controller handles the various PLL power supplies, so
remove any references to them from the PCIe and XUSB controller device
tree nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB pad controller handles the various PLL power supplies, so
remove any references to them from the XUSB controller device tree
node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The XUSB pad controller handles the various PLL power supplies, so
remove any references to them from the PCIe and XUSB controller device
tree nodes.
Signed-off-by: Thierry Reding <treding@nvidia.com>
GPIO hog nodes must have a "hog-" prefix or "-hog" suffix according to
the DT schema. Rename all such nodes to allow validation to pass.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Remove the unsupported "regulator-disable-ramp-delay" properties which
ended up in various DTS files for some reason.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The num-viewport property is never used and can be dropped, whereas the
"iommus" property is not needed since we use "iommu-map-mask" and
"iommu-map" already.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The HSP instances on Tegra194 are not fully compatible with the version
found on Tegra186, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra194 pinmux DT bindings do not define the nvidia,lpdr property,
so drop them from the device trees that have listed them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The standard "jedec," vendor prefix should be used for SPI NOR flash
chips. This allows the right DT schema to be picked for validation.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra186 CCPLEX cluster register region is 4 MiB is length, not 4
MiB - 1. This was likely presumed to be the "limit" rather than length.
Fix it up.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I2C controller found on Tegra186 is not fully compatible with the
Tegra210 version, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Child nodes of the TI INA3221 power monitor device tree node should be
called input@* according to the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The DT schema requires that nodes representing thermal zones include a
"-thermal" suffix in their name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make the order of the clocks and clock-names properties match the order
in the device tree bindings. This isn't strictly necessary from a point
of view of the operating system because matching will be done based on
the clock-names, but it makes it easier to validate the device trees
against the DT schema.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The CML1 and PLL_E clocks are never explicitly used by the AHCI
controller found on Tegra132, so drop them from the corresponding device
tree node.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The I2C controller found on Tegra124 is not fully compatible with the
Tegra114 version, so drop the fallback compatible string from the list.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add peripheral OPP tables on Tegra132 and wire them up to ACTMON and the
EMC. While at it, add the missing "#interconnect-cells" properties to
the memory controller and external memory controller nodes. Also set the
"#reset-cells" property for the memory controller because it exports the
hotflush reset controls.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The TKE (time-keeping engine) found on Tegra132 is not backwards
compatible with the version found on Tegra20, so update the compatible
string list accordingly.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC device tree bindings don't support the "#wake-cells" and
"nvidia,reset-gpio" properties, so remove them.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The AS3722 pinmux device tree node doesn't have a "reg" property and
therefore must not have a unit-address, so drop it.
While at it, add missing unit-addresses for the charger and smart
battery IC's on the ChromeOS embedded controller's I2C tunnel bus.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The native timers IP block found on NVIDIA Tegra SoCs implements a
watchdog timer that can be used to recover from system hangs. Add the
device tree node on Tegra186.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Regulators defined at the top level in device tree are no longer part of
a simple bus and therefore don't have a reg property. Nodes without a
reg property shouldn't have a unit-address either, so drop the unit
address from the node names. To ensure nodes aren't duplicated (in which
case they would end up merged in the final DTB), append the name of the
regulator to the node name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Clocks defined at the top level in device tree are no longer part of a
simple bus and therefore don't have a reg property. Nodes without a reg
property shouldn't have a unit-address either, so drop the unit address
from the node names. To ensure nodes aren't duplicated (in which case
they would end up merged in the final DTB), append the name of the clock
to the node name.
Signed-off-by: Thierry Reding <treding@nvidia.com>
The display controllers are attached to a separate ARM SMMU instance
that is dedicated to servicing isochronous memory clients. Add this ISO
instance of the ARM SMMU to device tree.
Please note that the display controllers are not hooked up to this SMMU
yet, because we are still missing a means to transition framebuffers
used by the bootloader to the kernel.
This based upon an initial patch by Thierry Reding <treding@nvidia.com>.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Populate the device-tree nodes for NVENC and NVJPG Host1x engines on
Tegra186 and Tegra194.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add support to enumerate SD in UHS mode on Tegra194. Add required
device-tree properties in SDMMC1 and SDMMC3 instances to enable dynamic
pad voltage switching and enumerate SD card in UHS-I modes.
Signed-off-by: Prathamesh Shete <pshete@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Jetson AGX Orin Developer Kit is a continuation of the Jetson
Developer Kit line using the new NVIDIA Tegra234 (Orin) SoC.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The NVIDIA Tegra234 SoC has 3 clusters of 4 Cortex-A78AE CPU cores each,
for a total of 12 CPUs. Each CPU has 64 KiB instruction and data caches
with each cluster having an additional 256 KiB unified L2 cache and a 2
MiB L3 cache.
Signed-off-by: Thierry Reding <treding@nvidia.com>
These two controllers expose general purpose I/O pins that can be used
to control or monitor a variety of signals.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add a device for TCU (Tegra Combined UART) used for serial console.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add missing properties to the eMMC controller, as required to use it on
actual hardware.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
On final Tegra234 systems, shared memory for communication with BPMP is
located at offset 0x70000 in SYSRAM.
Signed-off-by: Mikko Perttunen <mperttunen@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The json-schema bindings for SRAM expect the nodes to be called "sram"
rather than "sysram" or "shmem". Furthermore, place the brackets around
the SYSRAM references such that a two-element array is created rather
than a two-element array nested in a single-element array. This is not
relevant for device tree itself, but allows the nodes to be properly
validated against json-schema bindings.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This stable tag contains the addition of the EMC clock ID and an initial
list of memory client IDs for Tegra234 and will be shared between the
memory and ARM SoC trees.
-----BEGIN PGP SIGNATURE-----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=bl4k
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.17-dt-bindings-memory' into for-5.17/arm64/dt
dt-bindings: memory: Add Tegra234 support
This stable tag contains the addition of the EMC clock ID and an initial
list of memory client IDs for Tegra234 and will be shared between the
memory and ARM SoC trees.
If we have a list of requests in our plug list, send it to the driver in
one go, if possible. The driver must set mq_ops->queue_rqs() to support
this, if not the usual one-by-one path is used.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Convert the device tree bindings for the MISC register block found on
NVIDIA Tegra SoCs from plain text to json-schema format.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Document the variant of the memory controller and external memory
controllers found on Tegra234 and add some memory client and SMMU
stream ID definitions for use in device tree files.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
