In case, init_srcu_struct fails (because of memory allocation failure), we
might proceed with the driver initialization despite srcu_struct not being
entirely initialized.
Fixes: 913a89f009 ("ipmi: Don't initialize anything in the core until something uses it")
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Cc: Corey Minyard <cminyard@mvista.com>
Cc: stable@vger.kernel.org
Message-Id: <20211217154410.1228673-1-cascardo@canonical.com>
Signed-off-by: Corey Minyard <cminyard@mvista.com>
For VIRTCHNL_VF_OFFLOAD_VLAN, PF's would limit the number of VLAN
filters a VF was allowed to add. However, by the time the opcode failed,
the VLAN netdev had already been added. VIRTCHNL_VF_OFFLOAD_VLAN_V2
added the ability for a PF to tell the VF how many VLAN filters it's
allowed to add. Make changes to support that functionality.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the VF to support 802.1Q and 802.1ad VLAN insertion and stripping if
successfully negotiated via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
Multiple changes were needed to support this new functionality.
1. Added new aq_required flags to support any kind of VLAN stripping and
insertion offload requests via virtchnl.
2. Added the new method iavf_set_vlan_offload_features() that's
used during VF initialization, VF reset, and iavf_set_features() to
set the aq_required bits based on the current VLAN offload
configuration of the VF's netdev.
3. Added virtchnl handling for VIRTCHNL_OP_ENABLE_STRIPPING_V2,
VIRTCHNL_OP_DISABLE_STRIPPING_V2, VIRTCHNL_OP_ENABLE_INSERTION_V2,
and VIRTCHNL_OP_ENABLE_INSERTION_V2.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability added support that allows
the PF to set the location of the Tx and Rx VLAN tag for insertion and
stripping offloads. In order to support this functionality a few changes
are needed.
1. Add a new method to cache the VLAN tag location based on negotiated
capabilities for the Tx and Rx ring flags. This needs to be called in
the initialization and reset paths.
2. Refactor the transmit hotpath to account for the new Tx ring flags.
When IAVF_TXR_FLAGS_VLAN_LOC_L2TAG2 is set, then the driver needs to
insert the VLAN tag in the L2TAG2 field of the transmit descriptor.
When the IAVF_TXRX_FLAGS_VLAN_LOC_L2TAG1 is set, then the driver needs
to use the l2tag1 field of the data descriptor (same behavior as
before).
3. Refactor the iavf_tx_prepare_vlan_flags() function to simplify
transmit hardware VLAN offload functionality by only depending on the
skb_vlan_tag_present() function. This can be done because the OS
won't request transmit offload for a VLAN unless the driver told the
OS it's supported and enabled.
4. Refactor the receive hotpath to account for the new Rx ring flags and
VLAN ethertypes. This requires checking the Rx ring flags and
descriptor status bits to determine the location of the VLAN tag.
Also, since only a single ethertype can be supported at a time, check
the enabled netdev features before specifying a VLAN ethertype in
__vlan_hwaccel_put_tag().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Based on VIRTCHNL_VF_OFFLOAD_VLAN_V2, the VF can now support more VLAN
capabilities (i.e. 802.1AD offloads and filtering). In order to
communicate these capabilities to the netdev layer, the VF needs to
parse its VLAN capabilities based on whether it was able to negotiation
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or neither of
these.
In order to support this, add the following functionality:
iavf_get_netdev_vlan_hw_features() - This is used to determine the VLAN
features that the underlying hardware supports and that can be toggled
off/on based on the negotiated capabiltiies. For example, if
VIRTCHNL_VF_OFFLOAD_VLAN_V2 was negotiated, then any capability marked
with VIRTCHNL_VLAN_TOGGLE can be toggled on/off by the VF. If
VIRTCHNL_VF_OFFLOAD_VLAN was negotiated, then only VLAN insertion and/or
stripping can be toggled on/off.
iavf_get_netdev_vlan_features() - This is used to determine the VLAN
features that the underlying hardware supports and that should be
enabled by default. For example, if VIRTHCNL_VF_OFFLOAD_VLAN_V2 was
negotiated, then any supported capability that has its ethertype_init
filed set should be enabled by default. If VIRTCHNL_VF_OFFLOAD_VLAN was
negotiated, then filtering, stripping, and insertion should be enabled
by default.
Also, refactor iavf_fix_features() to take into account the new
capabilities. To do this, query all the supported features (enabled by
default and toggleable) and make sure the requested change is supported.
If VIRTCHNL_VF_OFFLOAD_VLAN_V2 is successfully negotiated, there is no
need to check VIRTCHNL_VLAN_TOGGLE here because the driver already told
the netdev layer which features can be toggled via netdev->hw_features
during iavf_process_config(), so only those features will be requested
to change.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
In order to support the new VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability the
VF driver needs to rework it's initialization state machine and reset
flow. This has to be done because successful negotiation of
VIRTCHNL_VF_OFFLOAD_VLAN_V2 requires the VF driver to perform a second
capability request via VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS before
configuring the adapter and its netdev.
Add the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit when sending the
VIRTHCNL_OP_GET_VF_RESOURECES message. The underlying PF will either
support VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2 or
neither. Both of these offloads should never be supported together.
Based on this, add 2 new states to the initialization state machine:
__IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS
__IAVF_INIT_CONFIG_ADAPTER
The __IAVF_INIT_GET_OFFLOAD_VLAN_V2_CAPS state is used to request/store
the new VLAN capabilities if and only if VIRTCHNL_VLAN_OFFLOAD_VLAN_V2
was successfully negotiated in the __IAVF_INIT_GET_RESOURCES state.
The __IAVF_INIT_CONFIG_ADAPTER state is used to configure the
adapter/netdev after the resource requests have finished. The VF will
move into this state regardless of whether it successfully negotiated
VIRTCHNL_VF_OFFLOAD_VLAN or VIRTCHNL_VF_OFFLOAD_VLAN_V2.
Also, add a the new flag IAVF_FLAG_AQ_GET_OFFLOAD_VLAN_V2_CAPS and set
it during VF reset. If VIRTCHNL_VF_OFFLOAD_VLAN_V2 was successfully
negotiated then the VF will request its VLAN capabilities via
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS during the reset. This is needed
because the PF may change/modify the VF's configuration during VF reset
(i.e. modifying the VF's port VLAN configuration).
This also, required the VF to call netdev_update_features() since its
VLAN features may change during VF reset. Make sure to call this under
rtnl_lock().
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently VIRTCHNL only allows for VLAN filtering and offloads to happen
on a single 802.1Q VLAN. Add support to filter and offload on inner,
outer, and/or inner + outer VLANs.
This is done by introducing the new capability
VIRTCHNL_VF_OFFLOAD_VLAN_V2. The flow to negotiate this new capability
is shown below.
1. VF - sets the VIRTCHNL_VF_OFFLOAD_VLAN_V2 bit in the
virtchnl_vf_resource.vf_caps_flags during the
VIRTCHNL_OP_GET_VF_RESOURCES request message. The VF should also set
the VIRTCHNL_VF_OFFLOAD_VLAN bit in case the PF driver doesn't support
the new capability.
2. PF - sets the VLAN capability bit it supports in the
VIRTCHNL_OP_GET_VF_RESOURCES response message. This will either be
VIRTCHNL_VF_OFFLOAD_VLAN_V2, VIRTCHNL_VF_OFFLOAD_VLAN, or none.
3. VF - If the VIRTCHNL_VF_OFFLOAD_VLAN_V2 capability was ACK'd by the
PF, then the VF needs to request the VLAN capabilities of the
PF/Device by issuing a VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS request.
If the VIRTCHNL_VF_OFFLOAD_VLAN capability was ACK'd then the VF
knows only single 802.1Q VLAN filtering/offloads are supported. If no
VLAN capability is ACK'd then the PF/Device doesn't support hardware
VLAN filtering/offloads for this VF.
4. PF - Populates the virtchnl_vlan_caps structure based on what it
allows/supports for that VF and sends that response via
VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS.
After VIRTCHNL_OP_GET_OFFLOAD_VLAN_V2_CAPS is successfully negotiated
the VF driver needs to interpret the capabilities supported by the
underlying PF/Device. The VF will be allowed to filter/offload the
inner 802.1Q, outer (various ethertype), inner 802.1Q + outer
(various ethertypes), or none based on which fields are set.
The VF will also need to interpret where the VLAN tag should be inserted
and/or stripped based on the negotiated capabilities.
Signed-off-by: Brett Creeley <brett.creeley@intel.com>
Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmG86EcUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXNtWxAAmjRflVuJNyVC23KUTGpKNSl+zFPN
O526Mizwouv8ZO4PWo6jHr0M+UtcEAc9Tn3XFPznskOEmFWycqHSlaNXL2RiFhwR
qSfwZEqQwZoKGb7fiD2XcHbY+OPQxixARVMQQHu77kCmY3sfz/Mjz3IAaihaEUnU
nmZ6qpndyg2vbnOmkKJGH1WWNWEq+zKFrc/w6EeMCdOAZ455qTCMXLz0lsxDF6G5
mYHnFlYgz4jnmU96BaN2GjWlG0/9Nrv52MAiSJzTnvBRbmhARaxQdAWaD+6vBQP6
F/KJwwynU6ojfgKGaKBVf7pcRXkRh+c6Y0d5uA9/Xd4noEDYKlD5Vf/yyUytiuYo
u9sUVBME+Vjk5vqPF3fZneMVx43IN73Bspii2DI/sAwllTCgayUXwB0apN3ZH1GR
xvjHbnsuSc+WNZBRTEr3FOvM0uax2N4TcjgjIiLbmZTPjpiol0sqARKRW7vY8Ld/
1/GSHlHvxz7ZT37ICbZreYnldXjpvdp+k4DirNb03Rc71x6+w3xInFI/jCfMXtzS
8VuA33m1q420DRCFgdY4KxYjl5dAbcFZDpU2FILH3NvduuYGN8Qbh24BbToNBwUZ
U7Hojk8EAWO7+YpGpEOYZc9hcGH2GemvyPLt2m7AO9T4a81f8IHBBvRTMGi/R/lN
r1PyoZR3GMkpHko=
=1nOw
-----END PGP SIGNATURE-----
Merge tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux
Pull selinux fix from Paul Moore:
"Another small SELinux fix for v5.16 to ensure that we don't block on
memory allocations while holding a spinlock.
This passes all our tests without problem"
* tag 'selinux-pr-20211217' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/selinux:
selinux: fix sleeping function called from invalid context
* A handful of DT updates for the SiFive HiFive Unmatched, that fix the
regulator handling. These should stop some warning spew.
* A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
that correctly hook up the MMC card detect signal.
-----BEGIN PGP SIGNATURE-----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=P1aR
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
- A handful of DT updates for the SiFive HiFive Unmatched, that fix the
regulator handling. These should stop some warning spew.
- A pair of fixes for both the SiFive Hifive Unleashed and Unmatched,
that correctly hook up the MMC card detect signal.
* tag 'riscv-for-linus-5.16-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: dts: sifive unmatched: Link the tmp451 with its power supply
riscv: dts: sifive unmatched: Fix regulator for board rev3
riscv: dts: sifive unmatched: Expose the PMIC sub-functions
riscv: dts: sifive unmatched: Expose the board ID eeprom
riscv: dts: sifive unmatched: Name gpio lines
riscv: dts: unmatched: Add gpio card detect to mmc-spi-slot
riscv: dts: unleashed: Add gpio card detect to mmc-spi-slot
-----BEGIN PGP SIGNATURE-----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=Huz8
-----END PGP SIGNATURE-----
Merge tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block
Pull block fixes from Jens Axboe:
- Fix for hammering on the delayed run queue timer (me)
- bcache regression fix for this merge window (Lin)
- Fix a divide-by-zero in the blk-iocost code (Tejun)
* tag 'block-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
bcache: fix NULL pointer reference in cached_dev_detach_finish
block: reduce kblockd_mod_delayed_work_on() CPU consumption
iocost: Fix divide-by-zero on donation from low hweight cgroup
-----BEGIN PGP SIGNATURE-----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=IY1e
-----END PGP SIGNATURE-----
Merge tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block
Pull io_uring fix from Jens Axboe:
"Just a single fix, fixing an issue with the worker creation change
that was merged last week"
* tag 'io_uring-5.16-2021-12-17' of git://git.kernel.dk/linux-block:
io-wq: drop wqe lock before creating new worker
Currently cleaned_count is initialized to ICE_DESC_UNUSED(rx_ring) and
later on during the Rx processing it is incremented per each frame that
driver consumed. This can result in excessive buffers requested from xsk
pool based on that value.
To address this, just drop cleaned_count and pass
ICE_DESC_UNUSED(rx_ring) directly as a function argument to
ice_alloc_rx_bufs_zc(). Idea is to ask for buffers as many as consumed.
Let us also call ice_alloc_rx_bufs_zc unconditionally at the end of
ice_clean_rx_irq_zc. This has been changed in that way for corresponding
ice_clean_rx_irq, but not here.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Commit ac6f733a7b ("ice: allow empty Rx descriptors") stated that ice
HW can produce empty descriptors that are valid and they should be
processed.
Add this support to xsk ZC path to avoid potential processing problems.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The descriptor that ntu is pointing at when we exit
ice_alloc_rx_bufs_zc() should not have its corresponding DD bit cleared
as descriptor is not allocated in there and it is not valid for HW
usage.
The allocation routine at the entry will fill the descriptor that ntu
points to after it was set to ntu + nb_buffs on previous call.
Even the spec says:
"The tail pointer should be set to one descriptor beyond the last empty
descriptor in host descriptor ring."
Therefore, step away from clearing the status_error0 on ntu + nb_buffs
descriptor.
Fixes: db804cfc21 ("ice: Use the xsk batched rx allocation interface")
Reported-by: Elza Mathew <elza.mathew@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
The 'if (ntu == rx_ring->count)' block in ice_alloc_rx_buffers_zc()
was previously residing in the loop, but after introducing the
batched interface it is used only to wrap-around the NTU descriptor,
thus no more need to assign 'xdp'.
Fixes: db804cfc21 ("ice: Use the xsk batched rx allocation interface")
Signed-off-by: Alexander Lobakin <alexandr.lobakin@intel.com>
Acked-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Currently, the zero-copy data path is reusing the memory region that was
initially allocated for an array of struct ice_rx_buf for its own
purposes. This is error prone as it is based on the ice_rx_buf struct
always being the same size or bigger than what the zero-copy path needs.
There can also be old values present in that array giving rise to errors
when the zero-copy path uses it.
Fix this by freeing the ice_rx_buf region and allocating a new array for
the zero-copy path that has the right length and is initialized to zero.
Fixes: 57f7f8b6bc ("ice: Use xdp_buf instead of rx_buf for xsk zero-copy")
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
i915:
- Fix a bound check in the DMC fw load.
ast:
- NULL ptr deref fix
simpledrm:
- pixel clock units fix
fb-helper:
- userspace regression revert
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN
-----BEGIN PGP SIGNATURE-----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=rNVA
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Dave Airlie:
"Mostly amdgpu fixes this week scattered around the driver, otherwise
one i915, one ast, one simpledrm. There is a revert in the fb-helper
for places userspace was using a string that we tried to change.
i915:
- Fix a bound check in the DMC fw load.
ast:
- NULL ptr deref fix
simpledrm:
- pixel clock units fix
fb-helper:
- userspace regression revert
amdgpu:
- Fix RLC register offset
- GMC fix
- Properly cache SMU FW version on Yellow Carp
- Fix missing callback on DCN3.1
- Reset DMCUB before HW init
- Fix for GMC powergating on PCO
- Fix a possible memory leak in GPU metrics table handling on RN"
* tag 'drm-fixes-2021-12-17-1' of git://anongit.freedesktop.org/drm/drm:
drm/amd/pm: fix a potential gpu_metrics_table memory leak
drm/amdgpu: correct the wrong cached state for GMC on PICASSO
drm/amd/display: Reset DMCUB before HW init
drm/amd/display: Set exit_optimized_pwr_state for DCN31
drm/amd/pm: fix reading SMU FW version from amdgpu_firmware_info on YC
drm/amdgpu: don't override default ECO_BITs setting
drm/amdgpu: correct register access for RLC_JUMP_TABLE_RESTORE
drm/i915/display: Fix an unsigned subtraction which can never be negative.
drm/ast: potential dereference of null pointer
drm: simpledrm: fix wrong unit with pixel clock
Revert "drm/fb-helper: improve DRM fbdev emulation device names"
Currently we only NULL the xdp_buff pointer in the internal SW ring but
we never give it back to the xsk buffer pool. This means that buffers
can be leaked out of the buff pool and never be used again.
Add missing xsk_buff_free() call to the routine that is supposed to
clean the entries that are left in the ring so that these buffers in the
umem can be used by other sockets.
Also, only go through the space that is actually left to be cleaned
instead of a whole ring.
Fixes: 2d4238f556 ("ice: Add support for AF_XDP")
Signed-off-by: Magnus Karlsson <magnus.karlsson@intel.com>
Signed-off-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Kiran Bhandare <kiranx.bhandare@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro, along with using pm_sleep_ptr() as this driver doesn't handle
runtime PM.
This makes it possible to remove the #ifdef CONFIG_PM guard around
the suspend/resume functions.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
- Use DEFINE_SIMPLE_DEV_PM_OPS() instead of the SIMPLE_DEV_PM_OPS()
macro. This makes it possible to remove the __maybe_unused flags
on the callback functions.
- Since we only have callbacks for suspend/resume, we can conditionally
compile the dev_pm_ops structure for when CONFIG_PM_SLEEP is enabled;
so use the pm_sleep_ptr() macro instead of pm_ptr().
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Some systems (e.g. Hyper-V guests) have all their memory marked as
hotpluggable in SRAT. acpi_numa_memory_affinity_init(), however,
ignores all such regions when !CONFIG_MEMORY_HOTPLUG and this is
unfortunate as memory affinity (NUMA) information gets lost.
'Hot Pluggable' flag in SRAT only means that "system hardware supports
hot-add and hot-remove of this memory region", it doesn't prevent
memory from being cold-plugged there.
Ignore 'Hot Pluggable' bit instead of skipping the whole memory
affinity information when !CONFIG_MEMORY_HOTPLUG.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
ACPICA code takes care about cache flushing on S1/S2/S3 in
acpi_hw_extended_sleep() and acpi_hw_legacy_sleep().
acpi_suspend_enter() calls into ACPICA code via acpi_enter_sleep_state()
for S1 or x86_acpi_suspend_lowlevel() for S3.
acpi_sleep_prepare() call tree:
__acpi_pm_prepare()
acpi_pm_prepare()
acpi_suspend_ops::prepare_late()
acpi_hibernation_ops::pre_snapshot()
acpi_hibernation_ops::prepare()
acpi_suspend_begin_old()
acpi_suspend_begin_old::begin()
acpi_hibernation_begin_old()
acpi_hibernation_ops_old::acpi_hibernation_begin_old()
acpi_power_off_prepare()
pm_power_off_prepare()
Hibernation (S4) and Power Off (S5) don't require cache flushing, so
the only interesting callsites are acpi_suspend_ops::prepare_late()
and acpi_suspend_begin_old::begin(). Both of them have cache flush
on ->enter() operation in acpi_suspend_enter().
Remove redundant ACPI_FLUSH_CPU_CACHE() in acpi_sleep_prepare() and
acpi_suspend_enter().
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
According to ACPI 6.4, Section 8.2, CPU cache flushing required on
entering the C3 power state.
Avoid flushing the cache on entering other C-states.
Signed-off-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
[ rjw: Changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Play a video on the raven (or PCO, raven2) platform, and then do the S3
test. When resume, the following error will be reported:
amdgpu 0000:02:00.0: [drm:amdgpu_ring_test_helper [amdgpu]] *ERROR* ring
vcn_dec test failed (-110)
[drm:amdgpu_device_ip_resume_phase2 [amdgpu]] *ERROR* resume of IP block
<vcn_v1_0> failed -110
amdgpu 0000:02:00.0: amdgpu: amdgpu_device_ip_resume failed (-110).
PM: dpm_run_callback(): pci_pm_resume+0x0/0x90 returns -110
[why]
When playing the video: The power state flag of the vcn block is set to
POWER_STATE_ON.
When doing suspend: There is no change to the power state flag of the
vcn block, it is still POWER_STATE_ON.
When doing resume: Need to open the power gate of the vcn block and set
the power state flag of the VCN block to POWER_STATE_ON.
But at this time, the power state flag of the vcn block is already
POWER_STATE_ON. The power status flag check in the "8f2cdef drm/amd/pm:
avoid duplicate powergate/ungate setting" patch will return the
amdgpu_dpm_set_powergating_by_smu function directly.
As a result, the gate of the power was not opened, causing the
subsequent ring test to fail.
[how]
In the suspend function of the vcn block, explicitly change the power
state flag of the vcn block to POWER_STATE_OFF.
BugLink: https://gitlab.freedesktop.org/drm/amd/-/issues/1828
Signed-off-by: chen gong <curry.gong@amd.com>
Reviewed-by: Evan Quan <evan.quan@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Fix the message argument.
0: Allow power down
1: Disallow power down
Signed-off-by: Lijo Lazar <lijo.lazar@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Modify the ACPI code to use acpi_fetch_acpi_dev() instead of
acpi_bus_get_device() where applicable.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Introduce acpi_fetch_acpi_dev() as a more reasonable replacement for
acpi_bus_get_device() and modify the code in scan.c to use it instead
of the latter.
No expected functional impact.
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
fwnode_graph_get_remote_node() is only used by the tegra-video driver.
Convert it to use newer fwnode_graph_get_endpoint_by_id() and drop
now-unused fwnode_graph_get_remote_node().
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Now that we have fwnode_graph_for_each_endpoint() macro, use it instead of
calling fwnode_graph_get_next_endpoint() directly. It manages the iterator
variable for the user without manual intervention.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Add fwnode_graph_get_endpoint_count() function to provide generic
implementation of of_graph_get_endpoint_count(). The former by default
only counts endpoints to available devices which is consistent with the
rest of the fwnode graph API. By providing FWNODE_GRAPH_DEVICE_DISABLED
flag, also unconnected endpoints and endpoints to disabled devices are
counted.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Update references for the ACPI _DSD documentation. In particular:
- Substitute _DSD property and hierarchical data extension documents with
the newer DSD guide that replaces both, and use its HTML form.
- Refer to the latest ACPI spec.
- Add data node reference documentation reference to graph documentation.
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
The data node reference documentation was missing a package that must
contain the property values, instead property name and multiple values
being present in a single package. This is not aligned with the _DSD
spec.
Fix it by adding the package for the values.
Also add the missing "reg" properties to two numbered nodes.
Fixes: b10134a364 ("ACPI: property: Document hierarchical data extension references")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
FWNODE_GRAPH_DEVICE_DISABLED flag was meant for also returning endpoints
connected to disabled devices, but it also may return endpoints that are
not connected. Fix this in documentation. Also
fwnode_graph_get_endpoint_by_id() was affeced by this.
Also improve the language a little bit.
Fixes: 0fcc2bdc8a ("device property: Add fwnode_graph_get_endpoint_by_id()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
For each endpoint it encounters, fwnode_graph_devcon_match() checks
whether the endpoint's remote port parent device is available. If it is
not, it ignores the endpoint but does not put the reference to the remote
endpoint port parent fwnode. For available devices the fwnode handle
reference is put as expected.
Put the reference for unavailable devices now.
Fixes: 637e9e52b1 ("device connection: Find device connections also from device graphs")
Cc: 5.1+ <stable@vger.kernel.org> # 5.1+
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Commit 2aa36604e8 ("PM: sleep: Avoid calling put_device() under
dpm_list_mtx") forgot to update the while () loop termination
condition to also break the loop if error is nonzero, which
causes the loop to become infinite if device_prepare() returns
an error for one device.
Add the missing !error check.
Fixes: 2aa36604e8 ("PM: sleep: Avoid calling put_device() under dpm_list_mtx")
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reported-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Cc: All applicable <stable@vger.kernel.org>
Merge series from Cezary Rojewski <cezary.rojewski@intel.com>:
Set is made of one fix for dma-transfer so that result of
dmaengine_submit() is tested before moving on, and few cleanups:
- two non-impactful, where catpt_component_open() layout gets improved
slightly as well as relocation of couple of locals found in
PCM-functions so that they look more cohesive
- no need to expose catpt-driver board-matching information globally.
Most fields are not by it and it's the sole user of haswell_machines
table. By having them locally it is clear what is actually being used
Cezary Rojewski (5):
ASoC: Intel: catpt: Test dmaengine_submit() result before moving on
ASoC: Intel: catpt: Reduce size of catpt_component_open()
ASoC: Intel: catpt: Streamline locals declaration for PCM-functions
ASoC: Intel: catpt: Drop SND_SOC_ACPI_INTEL_MATCH dependency
ASoC: Intel: Drop legacy HSW/BDW board-match information
include/sound/soc-acpi-intel-match.h | 1 -
sound/soc/intel/Kconfig | 2 +-
sound/soc/intel/catpt/device.c | 33 +++++++++++++++--
sound/soc/intel/catpt/dsp.c | 14 ++++++-
sound/soc/intel/catpt/pcm.c | 37 +++++++++----------
.../common/soc-acpi-intel-hsw-bdw-match.c | 16 --------
6 files changed, 61 insertions(+), 42 deletions(-)
--
2.25.1
Merge series from Dmitry Osipenko <digetx@gmail.com>:
This series revives Tegra20 S/PDIF driver which was upstreamed long time
ago, but never was used. It also turns Tegra DRM HDMI driver into HDMI
audio CODEC provider. Finally, HDMI audio is enabled in device-trees.
For now the audio is enable only for Acer A500 tablet and Toshiba AC100
netbook because they're already supported by upstream, later on ASUS TF101
tablet will join them.
I based S/PDIF patches on Arnd's Bergmann patch from a separate series [1]
that removes obsolete slave_id. This eases merging of the patches by
removing the merge conflict. This is a note for Mark Brown.
I also based this series on top of power management series [2]. I.e. [2]
should be applied first, otherwise "Add S/PDIF node to Tegra20 device-tree"
patch should have merge conflict. This is a note for Thierry.
[1] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=273312
[2] https://patchwork.ozlabs.org/project/linux-tegra/list/?series=274534
Changelog:
v4: - Added patches that update multi_v7_defconfig with the enabled S/PDIF
and APB DMA drivers.
v3: - Renamed S/PDIF device-tree clocks as was suggested by Rob Herring.
- Added r-bs and acks that were given by Rob Herring to v2.
v2: - Corrected I2S yaml problem that was reported by the DT bot for v1
by removing the non-existent required clock-names property.
- Removed assigned-clocks property from S/PDIF yaml since this property
is now inherited from the clocks property.
- Reordered the "tegra20: spdif: Set FIFO trigger level" patch, making
it the first sound/soc patch in the series, like it was suggested by
Mark Brown in the comment to v1. Also reworded commit message of this
patch to *not* make it looks like it should be backported to stable
kernels.
Arnd Bergmann (1):
ASoC: tegra20-spdif: stop setting slave_id
Dmitry Osipenko (21):
ASoC: dt-bindings: Add binding for Tegra20 S/PDIF
ASoC: dt-bindings: tegra20-i2s: Convert to schema
ASoC: dt-bindings: tegra20-i2s: Document new nvidia,fixed-parent-rate
property
dt-bindings: host1x: Document optional HDMI sound-dai-cells
ASoC: tegra20: spdif: Set FIFO trigger level
ASoC: tegra20: spdif: Support device-tree
ASoC: tegra20: spdif: Improve driver's code
ASoC: tegra20: spdif: Use more resource-managed helpers
ASoC: tegra20: spdif: Reset hardware
ASoC: tegra20: spdif: Support system suspend
ASoC: tegra20: spdif: Filter out unsupported rates
ASoC: tegra20: i2s: Filter out unsupported rates
drm/tegra: hdmi: Unwind tegra_hdmi_init() errors
drm/tegra: hdmi: Register audio CODEC on Tegra20
ARM: tegra_defconfig: Enable S/PDIF driver
ARM: config: multi v7: Enable NVIDIA Tegra20 S/PDIF driver
ARM: config: multi v7: Enable NVIDIA Tegra20 APB DMA driver
ARM: tegra: Add S/PDIF node to Tegra20 device-tree
ARM: tegra: Add HDMI audio graph to Tegra20 device-tree
ARM: tegra: acer-a500: Enable S/PDIF and HDMI audio
ARM: tegra: paz00: Enable S/PDIF and HDMI audio
.../display/tegra/nvidia,tegra20-host1x.txt | 1 +
.../bindings/sound/nvidia,tegra20-i2s.txt | 30 ---
.../bindings/sound/nvidia,tegra20-i2s.yaml | 77 +++++++
.../bindings/sound/nvidia,tegra20-spdif.yaml | 85 ++++++++
.../boot/dts/tegra20-acer-a500-picasso.dts | 8 +
arch/arm/boot/dts/tegra20-paz00.dts | 8 +
arch/arm/boot/dts/tegra20.dtsi | 40 +++-
arch/arm/configs/multi_v7_defconfig | 2 +
arch/arm/configs/tegra_defconfig | 1 +
drivers/gpu/drm/tegra/Kconfig | 3 +
drivers/gpu/drm/tegra/hdmi.c | 168 +++++++++++++--
sound/soc/tegra/tegra20_i2s.c | 49 +++++
sound/soc/tegra/tegra20_spdif.c | 197 ++++++++++++------
sound/soc/tegra/tegra20_spdif.h | 1 +
sound/soc/tegra/tegra_pcm.c | 6 +
sound/soc/tegra/tegra_pcm.h | 1 +
16 files changed, 574 insertions(+), 103 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.txt
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-i2s.yaml
create mode 100644 Documentation/devicetree/bindings/sound/nvidia,tegra20-spdif.yaml
--
2.33.1
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
Guennadi spotted inconsistencies with our 'const' handling, Ajit Kumar
flagged a missing check for a null pointer and we missed the
definition of debug zones.
Merge series from Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>:
None of the SOF platforms support INFO_RESUME, and rely on the
indirect path used by the ALSA core with the prepare and TRIGGER_START
steps.
Let's remove the left-over dead code.
Add generic compatible string "ns16550a" to serial port nodes of Armada
38x.
This makes it possible to use earlycon.
Fixes: 0d3d96ab00 ("ARM: mvebu: add Device Tree description of the Armada 380/385 SoCs")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
CN9130 has a built-in CP115 which has 2 GPIO controllers, but unlike in
Armada 7k and 8k both are left disabled by the SoC DTSI.
This first of all makes no sense as they are always present due to being
SoC built-in and its an issue as boards like CN9130-CRB use the CPO GPIO2
pins for regulators and SD card support without enabling them first.
So, enable both of them like Armada 7k and 8k do.
Fixes: 6b8970bd8d ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
CN9130 has one CP115 built in, which like the CP110 has 2 GPIO and 2 SPI
controllers built-in.
However, unlike the Armada 7k and 8k the SoC DTSI doesn't add the required
aliases as both the Orion SPI driver and MVEBU GPIO drivers require the
aliases to be present.
So add the required aliases for GPIO and SPI controllers.
Fixes: 6b8970bd8d ("arm64: dts: marvell: Add support for Marvell CN9130 SoC support")
Signed-off-by: Robert Marko <robert.marko@sartura.hr>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Kernel driver phy-mvebu-a3700-comphy.c needs to know the rate of the
reference xtal clock. So add missing xtal clock source into comphy device
tree node. If the property is not present, the driver defaults to 25 MHz
xtal rate (which, as far as we know, is used by all the existing boards).
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The CN9130-CRB boards have a MV88E6393X switch connected to eth0. Add
the necessary dts nodes and properties for this.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Enable the CP0 GPIO devices for the CN9130-CRB. This is needed for a
number of the peripheral devices to function.
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
The variable tmp is being masked with a bitmask and the value is being
written to port base + 0x3c. However, the masked value is being written
back to tmp and tmp is never used after this. The assignmentment is
redundant, replace the &= operator with just &.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewesd-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20211205232822.110099-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The i.MX 8QM DTS files use two compatibles, so update the binding to fix
dtbs_check warnings like:
arch/arm64/boot/dts/freescale/imx8qm-mek.dt.yaml: serial@5a060000:
compatible: ['fsl,imx8qm-lpuart', 'fsl,imx8qxp-lpuart'] is too long
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/1639680494-23183-2-git-send-email-abel.vesa@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
