One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
-----BEGIN PGP SIGNATURE-----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=0VoF
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/dt
Pull "ARM: tegra: Device tree changes for v4.14-rc1" from Thierry Reding:
One fix for Tegra124 to hook the host1x device up with the SMMU.
The remainder of this enables USB device mode on a couple of boards
where the port is currently unused.
* tag 'tegra-for-4.14-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: Enable UDC on AC100
ARM: tegra: Enable UDC on Jetson TK1
ARM: tegra: Enable UDC on Dalmore
ARM: tegra: Enable UDC on Beaver
ARM: tegra: Register host1x node with IOMMU binding on Tegra124
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloxmAAoJEFBXWFqHsHzOmiYH/3dBPc18iMgsEjHJ73FUJCb8
RvIxN/o4W60Kokm+vsrNHx3LfZYUCfgQCeHlYCHpL1jFGpwD0DBxNQ9QlMDG+TCa
IN+c32aB0a0U0RHl+c5jKLqPy4eVvD4NNDWGVpwjSpK/MARrsKjhEwr/Yjcrj87c
+miIiXBmTsUhzwXQF1UkK719rXI7tgZQNqO06qxJN0QxwKajZPyZzRbe1kgI1xQK
k7F8WG3OGxyRJYRt/qnovnCv7lDX1Jk4S0ySqhocEyyqkqUOXElRARWZOyP3D8CY
wJQIHRzlM/ffqDpbQDa17YuGmnMgsHZ/+Fa8tHvdL353Ow0TM6KkjoRGTd8F4GI=
=WoGP
-----END PGP SIGNATURE-----
Merge tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "ZTE device tree updates for 4.14" from Shawn Guo:
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots'.
* tag 'zte-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: zte: remove num-slots from zx296702-ad1
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloV7AAoJEFBXWFqHsHzOeIAH/ieM8fZEeUHO9waD4aoQJulp
kQHbJFKlEaQrB/y9LVUmNae0w/dpOaf5k/NVtfLQAZQhMqN6Y9XFQA0fnUAgiNbs
fknQpL6VnrO7nGUDEbIUommrRDPEVN9SEiiPpLpD938QjUDxTAibb8++QQOHC/S6
NLQbYMvubDTaUXkOiRodLQU6U/RQ5Byzmu+ytuKjlB1la0OzMegebD/OMXZtgysx
hcEDVBIEZmQO1TPrl5p6IZjjdHs1ua4gfRLQWq1RPXECakHJuyCPKILibyRID15j
w0C+sTxP1uIN950VYzufrbLIdyheWHSrx0FZSWa7tnus8W+h8kBAUd6NxyHLiyU=
=0Cwx
-----END PGP SIGNATURE-----
Merge tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "i.MX device tree updates for 4.14" from Shawn Guo:
- A series from Andrew Lunn updating imx6-rdu2 board to enable
on-board Marvell switch support.
- A series from Jagan Teki updating imx6ul-isiot and imx6ul-geam to
enable audio card and FEC support.
- Add support for Toradex Ixora V1.1 and Apalis Evaluation Board
along with some cleanups.
- Enable DRM display support for imx6ul-evk and imx7d-sdb board.
- Add i.MX53 based Beckhoff CX9020 board support.
- Add GPMI NAND and APBH DMA devices for i.MX7 and enables NAND support
for imx7-colibri board.
- Enables the ADV7180 analog video decoder sensor connected to the
IMX6 IPU on various Gateworks Ventana boards.
- Minor updates on misc boards and some random cleanups.
* tag 'imx-dt-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (47 commits)
ARM: dts: imx6q-bx50v3: Enable i2c recovery mechanism
ARM: dts: imx6q-apalis-eval: add support for Apalis Evaluation Board
ARM: dts: imx6: add support for Toradex Ixora V1.1 carrier board
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: use i2c from dwc hdmi
ARM: dts: imx6q-apalis-ixora: add camera i2c bus definition
ARM: dts: imx6q-apalis-ixora: get rid of obsolete fusion comment
ARM: dts: imx6qdl-apalis: reword cam i2c comment
ARM: dts: imx6qdl-apalis: imx6q-apalis-ixora: get rid of tegra legacy gen1_i2c comment
ARM: dts: imx6q-apalis-ixora: combine aliases
ARM: dts: imx6qdl-apalis: split usdhc1 pinctrl to support 4- and 8-bit
ARM: dts: imx6q-apalis-ixora: fix usdhc2 pinctrl property
ARM: dts: imx6ul-liteboard: Support poweroff
ARM: dts: imx: add CX9020 Embedded PC device tree
ARM: dts: imx53: add alternative UART2 configuration
ARM: dts: imx53: add srtc node
dt-bindings: arm: Add entry for Beckhoff CX9020
ARM: dts: i.MX25: add RNGB node to dtsi
ARM: dts: imx6ul-14x14-evk: Remove unrelated pin from ENET group
ARM: dts: imx7d-sdb: Add flexcan support
ARM: dts: imx7-colibri: add NAND support
...
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
-----BEGIN PGP SIGNATURE-----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=WUr3
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM-based SoCs Device Tree changes for
4.14, please pull the following:
- Eric moves the bcm2837 DT file from arm64 to arm because it created a maintenance
problem and would have required either duplication or cross merges
- Stefan changes how the pinmuxing is defined and pushes it at the board level
to support Raspberry Pi Zero Wireless. He then adds supports for the actual
Raspberry Pi Zero Wireless board along with binding documentation. Stefan
also defines a proper SMP enable-method property and binding for BCM2836
(Raspbery Pi 2)
- Rafal describes the BCM5301X USB ports correctly in Device Tree such that
it becomes possible to assign them to specific LED triggers (e.g: USB activity).
He does the same thing for BCM53573 and defines default LED triggers for USB.
- Jon provides a fix for Northstar Plus which consists in correctly defining
the "dma-coherent" property for peripherals which are DMA coherent. He also
does a bit of re-arrangement of the USB DT nodes and finally adds USB 3 PHY
and host controller support for NorthStar Plus
- Florian adds support for Broadcom's BCM947189ACDBMR reference board which is
based on BCM47182/53573 and which supports external MoCA (BCM6802)
- Ray fixes the wrong UART2 base address for Cygnus
- Scott moves the v3d node in the proper unit address order and defines the correct
UART alias for the BCM91130_entphn reference board to be UART3
- Jason adds the DT node for the Cygnus Cortex-A9 Performance Monitoring Unit
- Jonathan adds a bunch of additional peripherals to the Cygnus DTS include file:
SDHCI, Keypad, SPI, DMA and pinmux configurations
- Raveendra adds the Cygnus OHCI and EHCI Device Tree nodes
* tag 'arm-soc/for-4.14/devicetree' of http://github.com/Broadcom/stblinux:
ARM: BCM53573: Specify ports for USB LED for Tenda AC9
ARM: dts: cygnus: Add generic-ehci/ohci nodes
ARM: dts: cygnus: add serial0 alias for uart3 on bcm91130_entphn
ARM: dts: cygnus: Add additional peripherals to dtsi
ARM: dts: cygnus: Enable Performance Monitoring Unit
ARM: dts: cygnus: place v3d in proper address ordered location
ARM: dts: cygnus: Fix incorrect UART2 register base
ARM: dts: bcm283x: Add 32-bit enable method for SMP
dt-bindings: arm: add SMP enable-method for BCM2836
ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
ARM: dts: BCM5301X: Specify USB ports for USB LEDs of few devices
ARM: dts: NSP: Add USB3 and USB3 PHY to NSP
ARM: dts: NSP: Rearrage USB entries
ARM: dts: NSP: Add dma-coherent to relevant DT entries
ARM: dts: bcm2835: Add Raspberry Pi Zero W
dt-bindings: bcm: Add Raspberry Pi Zero W
ARM: bcm283x: Define UART pinmuxing on board level
ARM: dts: BCM5301X: Specify USB ports for each controller
ARM: dts: bcm283x: Move the BCM2837 DT contents from arm64 to arm.
These got delayed a bit because the iodelay changes had to be
reworked for a missing Signed-off-by. And the beagleboard-x15
wants to use iodelay too for mmc:
- A series of changes to add dra7 iodelay data used for mmc
- Add support for new beagleBoard-x15 revision c
- Fix logicpd-torpedo-37xx-devkit mmc card detect direction
-----BEGIN PGP SIGNATURE-----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=R16f
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.14/dt-v3-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt
Pull "device tree changes for omaps for v4.14, part2" from Tony Lindgren:
Second set of device tree changes for omaps for v4.14 merge window.
These got delayed a bit because the iodelay changes had to be
reworked for a missing Signed-off-by. And the beagleboard-x15
wants to use iodelay too for mmc:
- A series of changes to add dra7 iodelay data used for mmc
- Add support for new beagleBoard-x15 revision c
- Fix logicpd-torpedo-37xx-devkit mmc card detect direction
* tag 'omap-for-v4.14/dt-v3-pt2-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: omap3: logicpd-torpedo-37xx-devkit: Fix MMC1 cd-gpio
ARM: dts: am57xx-beagle-x15: Add support for rev C
ARM: dts: dra71-evm: Add pinmux configuration for MMC
ARM: dts: dra72-evm-revc: Add pinmux configuration for MMC
ARM: dts: dra72-evm: Add pinmux configuration for MMC
ARM: dts: am572x-idk: Add pinmux configuration for MMC
ARM: dts: am571x-idk: Add pinmux configuration for MMC
ARM: dts: am57xx-idk: Move common MMC/SD properties to common file
ARM: dts: am57xx-beagle-x15: Add pinmux configuration for MMC
ARM: dts: dra7-evm: Add pinmux configuration for MMC
ARM: dts: dra74x: Create a common file with MMC/SD IOdelay data
ARM: dts: dra72x: Create a common file with MMC/SD IOdelay data
These configs are required for booting kernel in QCOM
IPQ8074 boards.
Signed-off-by: Abhishek Sahu <absahu@codeaurora.org>
Signed-off-by: Varadarajan Narayanan <varada@codeaurora.org>
Signed-off-by: Andy Gross <andy.gross@linaro.org>
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots' from ZX296718 device tree.
- Enable various devices for ZX296718 SoC support, VGA display, I2S
audio, pinctrl, GPIO, PWM and IRDEC.
- Update zx296718-evb support to use audio-graph-card for HDMI audio
and add I2S sound card.
- Add initial zx296718-pcbox board support with storage, audio,
display devices enabled.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZlo4KAAoJEFBXWFqHsHzOee0H/RcMMznh0cKg8UjjlbAuhArW
4IxmA05TzYBN0VeLNwAzPMn3yrbSZPk5bm7MD/+csv6NuFF2NDlvshyAqWAYueaY
cLXnQvqE3axK5X9xkfQYKvk0OHhj/xIKzEdnJ3++EwEtnibUEl9g8kunopzTQOaq
BsOFTTfuey98hCg4WQSpGIqRhfpKXt/UV63e93TuPs1g0/fpmoooMTQdUE+Wmctq
y1JJb3OC5HMp/NkQRJobmUa2r6R+3T8gmvgFopoBVP543zR5kwJ7bCDXgkzZwIbV
jtLDVCfg+DAapSFpCbULkvOMMZo/rxjAFxP2b8ICFCzNC9zgWpoSAN8ut1Oznk0=
=hAsg
-----END PGP SIGNATURE-----
Merge tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "ZTE arm64 device tree updates for 4.14" from Shawn Guo:
- A clean up patch from Shawn Lin to remove the deprecated dwmmc
property 'num-slots' from ZX296718 device tree.
- Enable various devices for ZX296718 SoC support, VGA display, I2S
audio, pinctrl, GPIO, PWM and IRDEC.
- Update zx296718-evb support to use audio-graph-card for HDMI audio
and add I2S sound card.
- Add initial zx296718-pcbox board support with storage, audio,
display devices enabled.
* tag 'zte-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: zte: add initial zx296718-pcbox board support
arm64: dts: zx296718-evb: add I2S sound card support
arm64: dts: zx296718-evb: use audio-graph-card for HDMI audio
arm64: dts: zx296718: add irdec device for remote control
arm64: dts: zx296718: add PWM device support
arm64: dts: zx296718: add voltage data into OPP table
arm64: dts: zx296718: set a better parent clock for I2S0
arm64: dts: zx296718: add pinctrl and gpio devices
arm64: dts: zx296718: add I2S and I2C audio codec
arm64: dts: zx296718: add VGA device support
arm64: dts: zte: remove num-slots from zx296718
- Correct the typo in fsl-ls1088a-rdb board name.
- A series from Horia Geantă to consolidate aliases node and enable
crypto support for ls208xa and ls1088a.
- Enable USB host support for ls1012a.
- Enable cpuidle support for ls1088a and ls208xa.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZlodKAAoJEFBXWFqHsHzOLYAIAIs6YEEhjbJiet6EMmwpneJo
hTGcU/Gv6q6ozF3uV1+oMqnv64rlzwPR8jTjt29+lCS2I4/zv7Zfr83GR1iMtW90
hIKUMnWwX/ATY1BC4YB36E0Z0WRolNoKU6iKBujMsfxPFRBXulEQwngZoFS5EvHy
TDqCTTRHBHhnzPqMPSJ3q/3r6VPTHDtj1ap+zF8EsS156ybPHhajHm/+u3Kvh6Kh
MnI+Y/SHPFCmy2Pj34SsixGKBEwAukyeddbufUlnrP3wcDnIvv64SWURCsBygEww
jhAD8rYWCFyhqM4vBbQ8AvXrKJkJDZETRy1GTTwDK2MjWeIzY6JtZ+cOGtyBTwU=
=6GLX
-----END PGP SIGNATURE-----
Merge tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt64
Pull "Freescale arm64 device tree updates for 4.14" from Shawn Guo:
- Correct the typo in fsl-ls1088a-rdb board name.
- A series from Horia Geantă to consolidate aliases node and enable
crypto support for ls208xa and ls1088a.
- Enable USB host support for ls1012a.
- Enable cpuidle support for ls1088a and ls208xa.
* tag 'imx-dt64-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls1088: Correction in Board name from "L1088A" to "LS1088A"
arm64: dts: ls208xa: add cpu idle support
arm64: dts: ls1088a: add cpu idle support
arm64: dts: freescale: ls1088a: add crypto node
arm64: dts: freescale: ls208xa: add crypto node
arm64: dts: freescale: ls208xa: share aliases node
arm64: dts: ls1012a: add USB host controller nodes
4.14, please pull the following:
- Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent
with what was done for stingray and to future proof the addition of new board
DTS files
- Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC
DTS include file
- Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS
include files
- Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes
to the Stingray DTS include files
- Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS
files
-----BEGIN PGP SIGNATURE-----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=0wLC
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux into next/dt64
Pull "Broadcom devicetree-arm64 changes for 4.14" from Florian Fainelli:
This pull request contains Broadcom ARM64-based SoCs Device Tree changes for
4.14, please pull the following:
- Scott moves all the Northstar 2 DTS files into a sub-directory to be consistent
with what was done for stingray and to future proof the addition of new board
DTS files
- Velibor adds the ARM CCN-502 interconnect DT node to the Stingray SoC
DTS include file
- Srinath adds the MDIO multiplexer and SATA nodes to the Stingray DTS
include files
- Anup adds the SP804 timers, FlexRM (mailbox) and RAID engine DT nodes
to the Stingray DTS include files
- Abishek adds the BGMAC (Ethernet controller) node to the Stingray DTS
files
* tag 'arm-soc/for-4.14/devicetree-arm64' of http://github.com/Broadcom/stblinux:
arm64: dts: Add SBA-RAID DT nodes for Stingray SoC
arm64: dts: Add FlexRM DT nodes for Stingray
arm64: dts: Add SATA DT nodes for Stingray SoC
arm64: dts: Add DT node to enable BGMAC driver on Stingray
arm64: dts: Add sp804 DT nodes for Stingray SoC
arm64: dts: Add MDIO multiplexer DT node for Stingray
arm64: dts: Enable stats for CCN-502 interconnect on Stingray
arm64: dts: move ns2 into northstar2 directory
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
-----BEGIN PGP SIGNATURE-----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=mYch
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into next/defconfig
Pull "ARM: tegra: Default configuration updates for v4.14-rc1" from Thierry Reding:
Enables the ChipIdea UDC driver and selects some symbols that were
previously being selected by other drivers but will no longer be in
v4.14.
* tag 'tegra-for-4.14-arm-defconfig' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: defconfig: tegra: Enable ChipIdea UDC driver
ARM: configs: Add Tegra I2S interfaces to multi_v7_defconfig
ARM: tegra: Add Tegra I2S interfaces to defconfig
ARM: tegra: Update default configuration for v4.13-rc1
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJZloiPAAoJEFBXWFqHsHzOK9AH/2m3J8waqDJW1ln6emcBCB7X
2LSHk+66UGN+V4rchXHtrdfjjrpszaRtregW29qCYqwATA+ZEmtCey6MR/8krzBk
exjYOfZTDXvAqnVnbr5JT+/PWVzDKCLHLSVEMXZ3V2ylM0ps4Pdb1G19RxWg58HO
tE69x1lIyHEphpaZ/xvVuD7k8BrTBYdgVn41qwlzZwZsiHIXLSih3wirxX911C11
V3yWoFAG9NZ1qjIJEYn1m/wtpWtyUu8IRDiZlHyodlR+ffeE43Hgh2+Ih/lqyKrm
SH4U0fN0D7Tta08/2MvPeHsGCnppk4kWs0tZDafUd8qOb+MPi3NzNDI2Y7QRktM=
=ljhX
-----END PGP SIGNATURE-----
Merge tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/defconfig
Pull "i.MX defconfig updates for 4.14" from Shawn Guo:
- Enable SPI_GPIO and GPIO_74X164 support which are useful for some
boards like imx7d-sabresd.
- Enable build of CODA video codec and staging video4linux drivers.
* tag 'imx-defconfig-4.14' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: imx_v6_v7_defconfig: Enable staging video4linux drivers
ARM: imx_v6_v7_defconfig: Select the coda driver as module
ARM: imx_v6_v7_defconfig: Enable GPIO_74X164
ARM: imx_v6_v7_defconfig: Enable SPI_GPIO
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
-----BEGIN PGP SIGNATURE-----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=+2/I
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux into next/defconfig
Pull "Broadcom defconfig changes for 4.14" from Florian Fainelli:
This pull request contains defconfig file changes for Broadcom ARM-based SoCs
for 4.14, please pull the following:
- Markus enables the Broadcom STB AVS thermal monitoring driver as a module
which is currently queued in Rui Zhang's tree
- Stefan updates the bcm2835_defconfig to contain a few useful changes: the RPI
mini UART is enabled by default, the default CMA pool is bumped up to 32MB to
support VC4 usages and finally BRCMFMAC is enabled as module since this is the
wireless driver used on Raspberry Pi Zero Wireless.
* tag 'arm-soc/for-4.14/defconfig' of http://github.com/Broadcom/stblinux:
ARM: multi_v7_defconfig: add CONFIG_BRCMSTB_THERMAL
ARM: bcm2835_defconfig: Enable wifi driver for RPi Zero W
ARM: bcm2835_defconfig: Increase CMA for VC4
ARM: bcm2835_defconfig: Enable Mini UART console support
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=nQRM
-----END PGP SIGNATURE-----
Merge tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/defconfig
Pull "Second Round of Renesas ARM Based SoC Defconfig Updates for v4.14"
from Simon Horman:
* Enable BQ32000 rtc in shmobile_defconfig
Biju Das says "The iWave RZ/G1M Q7 SOM supports RTC (TI BQ32000). To
increase hardware support enable the driver in the shmobile_defconfig
multiplatform configuration."
* tag 'renesas-defconfig2-for-v4.14' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Enable BQ32000 rtc in shmobile_defconfig
- Set of 5 i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by creating
a new function and using it where needed instead of just patching up a
few lines...a smaller fix could probably be done, but the larger fix
is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't actually
happen, I expect a patch to remove this from all drivers that share
this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes
-----BEGIN PGP SIGNATURE-----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=84Ve
-----END PGP SIGNATURE-----
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"Fourth set of -rc fixes for 4.13 cycle. This is all of the -rc fixes
that we know of. I suspect this will be the last rc pull request, but
you never know, I could be wrong.
Nothing major here. There are the i40iw patches I mentioned in my last
pull request minus one that I pulled out because it wasn't a fix and
not appropriate for the rc cycle. Then a few other items trickled in
and were added to the pull request. It's fairly small aside from those
five i40iw patches
- Set of five i40iw fixes (the first of these is rather large by line
count consideration, but I decided to send it because if fixes a
legitimate issue and the line count is because it does so by
creating a new function and using it where needed instead of just
patching up a few lines...a smaller fix could probably be done, but
the larger fix is the better code solution)
- One vmw_pvrdma fix
- One hns_roce fix (this silences a checker warning, but can't
actually happen, I expect a patch to remove this from all drivers
that share this same check in for-next)
- One iw_cxgb4 fix
- Two IB core fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/uverbs: Fix NULL pointer dereference during device removal
IB/core: Protect sysfs entry on ib_unregister_device
iw_cxgb4: fix misuse of integer variable
IB/hns: fix memory leak on ah on error return path
i40iw: Fix potential fcn_id_array out of bounds
i40iw: Use correct alignment for CQ0 memory
i40iw: Fix typecast of tcp_seq_num
i40iw: Correct variable names
i40iw: Fix parsing of query/commit FPM buffers
RDMA/vmw_pvrdma: Report CQ missed events
Enables multiple Interrupt vectors. Driver is requesting the max
MSIX vectors based on the number of online cpus and creates upto
9 MSIx vectors (1 for control path and 8 for data path).
A tasklet is created for each of these vectors. NQs are assigned
to CQs in round robin fashion.
This patch also adds IRQ affinity hint for the MSIX vector of each NQ.
Signed-off-by: Ray Jui <ray.jui@broadcom.com>
Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This patch series primarily increases sizes of variables that hold
lid values from 16 to 32 bits. Additionally, it adds a check in
the IB mad stack to verify a properly formatted MAD when OPA
extended LIDs are used.
Signed-off-by: Don Hiatt <don.hiatt@intel.com>
Reviewed-by: Dennis Dalessandro <dennis.dalessandro@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Merging our (hopefully) final -rc pull branch into our for-next branch
because some of our pending patches won't apply cleanly without having
the -rc patches in our tree.
Signed-off-by: Doug Ledford <dledford@redhat.com>
A bug in the VSX register saving that could cause userspace FP/VMX register
corruption. Never seen to happen (that we know of), was found by code
inspection, but still tagged for stable given the consequences.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=jIDJ
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
"A bug in the VSX register saving that could cause userspace FP/VMX
register corruption.
Never seen to happen (that we know of), was found by code inspection,
but still tagged for stable given the consequences"
* tag 'powerpc-4.13-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix VSX enabling/flushing to also test MSR_FP and MSR_VEC
Conflicts:
drivers/infiniband/core/iwcm.c - The rdma_netlink patches in
HEAD and the iwarp cm workqueue fix (don't use WQ_MEM_RECLAIM,
we aren't safe for that context) touched the same code.
Signed-off-by: Doug Ledford <dledford@redhat.com>
A small number of bugfixes, nothing serious this time.
Here is a full list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for device
repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=9Xbk
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"A small number of bugfixes, nothing serious this time. Here is a full
list.
4.13 regression fix:
- imx7d-sdb pinctrl support regressed in 4.13 due to an incomplete
patch
DT fixes for recently added devices:
- badly copied DT entries on imx6qdl-nitrogen6_som broke PCI reset
- sama5d2 memory controller had the wrong ID and registers
- imx7 power domains did not work correctly with deferred probing
(driver added in 4.12)
- Allwinner H5 pinctrl (added in 4.12) did not work right with GPIO
interrupts
Fixes for older bugs that just got noticed:
- i.MX25 ADC support (added in 4.6) apparently never worked right due
to a missing 'ranges' property in DT.
- Renesas Salvador Audio support (added in v4.5) was broken for
device repeated bind/unbind due to a naming conflict.
- Various allwinner boards are missing an 'ethernet' alias in DT,
leading to unstable device naming.
Preventive bugfix:
- TI Keystone needs a fix to prevent a NULL pointer dereference with
an upcoming PM change"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
soc: ti: ti_sci_pm_domains: Populate name for genpd
ARM: dts: imx6qdl-nitrogen6_som2: fix PCIe reset
arm64: allwinner: h5: fix pinctrl IRQs
arm64: allwinner: a64: sopine: add missing ethernet0 alias
arm64: allwinner: a64: pine64: add missing ethernet0 alias
arm64: allwinner: a64: bananapi-m64: add missing ethernet0 alias
arm64: renesas: salvator-common: avoid audio_clkout naming conflict
ARM: dts: i.MX25: add ranges to tscadc
soc: imx: gpcv2: fix regulator deferred probe
ARM: dts: at91: sama5d2: fix EBI/NAND controllers declaration
ARM: dts: at91: sama5d2: use sama5d2 compatible string for SMC
ARM: dts: imx7d-sdb: Put pinctrl_spi4 in the correct location
Johan Hedberg says:
====================
pull request: bluetooth-next 2017-08-18
Here's one more bluetooth-next pull request for the 4.14 kernel:
- Multiple fixes for Broadcom controllers
- Fixes to the bluecard HCI driver
- New USB ID for Realtek RTL8723BE controller
- Fix static analyzer warning with kfree
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.
Done using Coccinelle.
@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};
@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)
@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p
@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Add const to bin_attribute structures as they are only passed to the
functions sysfs_{remove/create}_bin_file. The arguments passed are of
type const, so declare the structures to be const.
Done using Coccinelle.
@m disable optional_qualifier@
identifier s;
position p;
@@
static struct bin_attribute s@p={...};
@okay1@
position p;
identifier m.s;
@@
(
sysfs_create_bin_file(...,&s@p,...)
|
sysfs_remove_bin_file(...,&s@p,...)
)
@bad@
position p!={m.p,okay1.p};
identifier m.s;
@@
s@p
@change depends on !bad disable optional_qualifier@
identifier m.s;
@@
static
+const
struct bin_attribute s={...};
Signed-off-by: Bhumika Goyal <bhumirks@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Initializing cq_context with ev_queue in create_cq(), leads to NULL pointer
dereference in ib_uverbs_comp_handler(), if application doesnot use completion
channel. This patch fixes the cq_context initialization.
Fixes: 1e7710f3f6 ("IB/core: Change completion channel to use the reworked")
Signed-off-by: Potnuri Bharat Teja <bharat@chelsio.com>
Reviewed-by: Matan Barak <matanb@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
A collection of small fixes, mostly for regression fixes (sequencer
kconfig and emu10k1 probe) and device-specific quirks (three for USB
and one for HD-audio). One significant change is a fix for races in
ALSA sequencer core, which covers over the previous incomplete fix.
-----BEGIN PGP SIGNATURE-----
iQJCBAABCAAsFiEECxfAB4MH3rD5mfB6bDGAVD0pKaQFAlmWrtUOHHRpd2FpQHN1
c2UuZGUACgkQbDGAVD0pKaT0qhAAteVfBfb18wm4HCq6yYZtiD62bB62+/6uaNXA
iCt7YK3FTkZHkzPvtyPprAq0N6+2H6/278nwf93EGdnNVWHjPn6BdRSFX7NHqNHh
uqKt0/qIuwL0r+caUuRPH8vOcasMnRMg1g95hLtfOpQGXbiNVn7CmV7jeaLZDizh
BUvHeuxwS5OxUPo8bxz/4DzxeXNa24qFVErYrJb6w5AJ4g5wc4vWULrqbSOB4Pn7
BuxaAl0dc2IfqDOFb+hlXM2YCDp2Ob3CwClX4vYUIkvAP2TDYeCIqtPHJvSpYJU9
Cxlf2bxDwAoOXh26k4twD4u+ryRxXft4bxzhL3XGQRm93pGyYHnPT6tqxkuMlf5f
xS6i2p822aE69FszDQTWWqNWx+LZOFkXdpX4YJKRRM3wIRw/sl+OYNGxEPG74XUE
sEfFM9A+8e2uds2JZCRpUS++agFpamei1L8y9Ao1COcCtfrlQzHCSlkptP08QBff
ULaIWwcV4SRp2Dl2ewIgiJLroZHBDX/t93fnewnlnqdbNWoqK6t6foMe8xfPqA32
ejnvMtXQPRGMJYEiQdzHtwNiHGohs3ibDfKJmAx7Me6gDZzm3JEEmcZ9Hw48Pe0c
HYfMXweZ8tRQF2uL96Qf6kcTwy0SSyXZfyYcrU5MedZSld44Y4xeR6mcdpXzKY8N
TdAgyR0=
=9p9K
-----END PGP SIGNATURE-----
Merge tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes, mostly for regression fixes (sequencer
kconfig and emu10k1 probe) and device-specific quirks (three for USB
and one for HD-audio).
One significant change is a fix for races in ALSA sequencer core,
which covers over the previous incomplete fix"
* tag 'sound-4.13-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: emu10k1: Fix forgotten user-copy conversion in init code
ALSA: usb-audio: add DSD support for new Amanero PID
ALSA: usb-audio: Add mute TLV for playback volumes on C-Media devices
ALSA: usb-audio: Apply sample rate quirk to Sennheiser headset
ALSA: seq: 2nd attempt at fixing race creating a queue
ALSA: hda/realtek - Fix pincfg for Dell XPS 13 9370
ALSA: seq: Fix CONFIG_SND_SEQ_MIDI dependency
A sockaddr_in structure on the stack getting passed into rdma_ip2gid
triggers this warning, since we memcpy into a larger sockaddr_in6
structure:
In function 'memcpy',
inlined from 'rdma_ip2gid' at include/rdma/ib_addr.h:175:3,
inlined from 'addr_event.isra.4.constprop' at drivers/infiniband/core/roce_gid_mgmt.c:693:2,
inlined from 'inetaddr_event' at drivers/infiniband/core/roce_gid_mgmt.c:716:9:
include/linux/string.h:305:4: error: call to '__read_overflow2' declared with attribute error: detected read beyond size of object passed as 2nd parameter
The warning seems appropriate here, but the code is also clearly
correct, so we really just want to shut up this instance of the
output.
The best way I found so far is to avoid the memcpy() call and instead
replace it with a struct assignment.
Fixes: 6974f0c455 ("include/linux/string.h: add the option of fortified string.h functions")
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Trivial fix to spelling mistake in i40iw_debug message and
also split up a couple of lines that are too long and cause
checkpatch warnings
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Port validation is performed in ib_core, no need to duplicate it here.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
This message is warning so let's print it accordingly.
Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Remove NULL check for cm_node->listener in i40iw_accept
as listener is always present at this point.
Remove the check for cm_node->accept_pend and related code
in i40iw_cm_event_connected as the cm_node in this context
is only pertinent to active node and cm_node->accept_pend
is always 0.
This fixes the following smatch warnings,
drivers/infiniband/hw/i40iw/i40iw_cm.c:3691 i40iw_accept()
error: we previously assumed 'cm_node->listener' could be null
drivers/infiniband/hw/i40iw/i40iw_cm.c:4061 i40iw_cm_event_connected()
error: we previously assumed 'cm_node->listener' could be null
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Shiraz Saleem <shiraz.saleem@intel.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
10774 1872 8 12654 316e infiniband/hw/vmw_pvrdma/pvrdma_main.o
File size After adding 'const':
text data bss dec hex filename
10838 1808 8 12654 316e infiniband/hw/vmw_pvrdma/pvrdma_main.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
10429 780 33 11242 2bea drivers/infiniband/hw/nes/nes.o
File size After adding 'const':
text data bss dec hex filename
10541 668 33 11242 2bea drivers/infiniband/hw/nes/nes.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
pci_device_id are not supposed to change at runtime. All functions
working with pci_device_id provided by <linux/pci.h> work with
const pci_device_id. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
13067 805 4 13876 3634 infiniband/hw/mthca/mthca_main.o
File size After adding 'const':
text data bss dec hex filename
13419 453 4 13876 3634 infiniband/hw/mthca/mthca_main.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Some drivers (specifically the nes IB driver), want to create a lot of
sysfs driver attributes. Instead of open-coding the creation and
removal of these files (and getting it wrong btw), it's a better idea to
let the driver core handle all of this logic for us.
So add a new field to the pci driver structure, **groups, that allows
pci drivers to specify an attribute group list it wishes to have created
when it is registered with the driver core.
Big bonus is now the driver doesn't race with userspace when the sysfs
files are created vs. when the kobject is announced, so any script/tool
that actually wanted to use these files will not have to poll waiting
for them to show up.
Cc: Faisal Latif <faisal.latif@intel.com>
Cc: Doug Ledford <dledford@redhat.com>
Cc: Sean Hefty <sean.hefty@intel.com>
Cc: Hal Rosenstock <hal.rosenstock@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Acked-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
Current context speaking of tcpdump filters is out of date these
days, so lets improve the sysctl description for the BPF knobs
a bit.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
The loop counter k is currently being decremented from zero which
is incorrect. Fix this by incrementing k instead
Detected by CoverityScan, CID#401847 ("Infinite loop")
Fixes: 83f18a557c ("netxen_nic: fw dump support")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Adding a lock around one of the assignments prevents gcc from
tracking the state of the local 'fibmatch' variable, so it can no
longer prove that 'dst' is always initialized, leading to a bogus
warning:
net/ipv6/route.c: In function 'inet6_rtm_getroute':
net/ipv6/route.c:3659:2: error: 'dst' may be used uninitialized in this function [-Werror=maybe-uninitialized]
This moves the other assignment into the same lock to shut up the
warning.
Fixes: 121622dba8 ("ipv6: route: make rtm_getroute not assume rtnl is locked")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Salil Mehta says:
====================
Misc. Bug fixes for HNS3 Ethernet Driver
This patch-set fixes various bugs reported by community.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the static check warning due to missing handling leg of
unsupported L3 protocol type in the hns3_get_l4_protocol() function.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for
hip08 SoC")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the static check error warning in hns3_get_link_ksettings()
function by re-arranging the code.
Fixes: 496d03e960 ("net: hns3: Add Ethtool support to HNS3 Driver")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes the missing u64_stats_fetch_begin_irq() while trying to
atomically do 64-bit RX/TX fetch. We did not get any error during test
as our SoC is 64-bit so all of these seq/lock operations results in NOOP.
As such, this seq lock supports has been added for the sake of completion
if this code ever runs on 32-bit platform and we are trying to do 64-bit
stats fetch.
Fixes: 76ad4f0ee7 ("net: hns3: Add support of HNS3 Ethernet Driver for
hip08 SoC")
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Salil Mehta <salil.mehta@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
* 'for-next/perf' of git://git.kernel.org/pub/scm/linux/kernel/git/will/linux:
arm64: perf: add support for Cortex-A35
arm64: perf: add support for Cortex-A73
arm64: perf: Remove redundant entries from CPU-specific event maps
arm64: perf: Connect additional events to pmu counters
arm64: perf: Allow standard PMUv3 events to be extended by the CPU type
perf: xgene: Remove unnecessary managed resources cleanup
arm64: perf: Allow more than one cycle counter to be used
The percpu variables efi_fpsimd_state and efi_fpsimd_state_used,
used by the FPSIMD save/restore routines for EFI calls, are
unintentionally global.
There's no reason for anything outside fpsimd.c to touch these, so
this patch makes them static (as they should have been in the first
place).
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
