Commit f01642e491 ("perf metricgroup: Support multiple events for
metricgroup") introduced support for multiple events in a metric group.
But with the current upstream, metric events names are not printed
properly incase we try to run multiple metric groups with overlapping
event.
With current upstream version, incase of overlapping metric events issue
is, we always start our comparision logic from start. So, the events
which already matched with some metric group also take part in
comparision logic. Because of that when we have overlapping events, we
end up matching current metric group event with already matched one.
For example, in skylake machine we have metric event CoreIPC and
Instructions. Both of them need 'inst_retired.any' event value. As
events in Instructions is subset of events in CoreIPC, they endup in
pointing to same 'inst_retired.any' value.
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
1,254,992,790 inst_retired.any # 1254992790.0
Instructions
# 1.3 CoreIPC
977,172,805 cycles
1,254,992,756 inst_retired.any
1.000802596 seconds time elapsed
command:# sudo ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
948,650 uops_retired.retire_slots
866,182 inst_retired.any # 0.7 IPC
866,182 inst_retired.any
1,175,671 cpu_clk_unhalted.thread
Patch fixes the issue by adding a new bool pointer 'evlist_used' to keep
track of events which already matched with some group by setting it
true. So, we skip all used events in list when we start comparision
logic. Patch also make some changes in comparision logic, incase we get
a match miss, we discard the whole match and start again with first
event id in metric event.
With this patch:
In skylake platform:
command:# ./perf stat -M CoreIPC,Instructions -C 0 sleep 1
Performance counter stats for 'CPU(s) 0':
3,348,415 inst_retired.any # 0.3 CoreIPC
11,779,026 cycles
3,348,381 inst_retired.any # 3348381.0
Instructions
1.001649056 seconds time elapsed
command:# ./perf stat -M UPI,IPC sleep 1
Performance counter stats for 'sleep 1':
1,023,148 uops_retired.retire_slots # 1.1 UPI
924,976 inst_retired.any
924,976 inst_retired.any # 0.6 IPC
1,489,414 cpu_clk_unhalted.thread
1.003064672 seconds time elapsed
Signed-off-by: Kajol Jain <kjain@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Anju T Sudhakar <anju@linux.vnet.ibm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20200221101121.28920-1-kjain@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a slight misalignment in -A -I output.
For example:
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000440863 CPU0 1,068,388 cpu/event=cpu-cycles/
1.000440863 CPU1 875,954 cpu/event=cpu-cycles/
1.000440863 CPU2 3,072,538 cpu/event=cpu-cycles/
1.000440863 CPU3 4,026,870 cpu/event=cpu-cycles/
1.000440863 CPU4 5,919,630 cpu/event=cpu-cycles/
1.000440863 CPU5 2,714,260 cpu/event=cpu-cycles/
1.000440863 CPU6 2,219,240 cpu/event=cpu-cycles/
1.000440863 CPU7 1,299,232 cpu/event=cpu-cycles/
The value of counts is not aligned with the column "counts" and
the event name is not aligned with the column "events".
With this patch, the output is,
# perf stat -e cpu/event=cpu-cycles/ -a -A -I 1000
# time CPU counts unit events
1.000423009 CPU0 997,421 cpu/event=cpu-cycles/
1.000423009 CPU1 1,422,042 cpu/event=cpu-cycles/
1.000423009 CPU2 484,651 cpu/event=cpu-cycles/
1.000423009 CPU3 525,791 cpu/event=cpu-cycles/
1.000423009 CPU4 1,370,100 cpu/event=cpu-cycles/
1.000423009 CPU5 442,072 cpu/event=cpu-cycles/
1.000423009 CPU6 205,643 cpu/event=cpu-cycles/
1.000423009 CPU7 1,302,250 cpu/event=cpu-cycles/
Now output is aligned.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200218071614.25736-1-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group information
together. In previous patch, we have supported a new option "--group-sort-idx"
to sort the output by the event at the index n in event group.
It would be nice if we can use a hotkey in browser to select a event
to sort.
For example,
# perf report --group
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] check_preempt_curr
When user press hotkey '3' (event index, starting from 0), it indicates
to sort output by the forth event in group.
Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, ...
Overhead Command Shared Object Symbol
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
v6:
---
Jiri provided a good improvement to eliminate unneeded refresh.
This improvement is added to v6.
v2:
---
1. Report warning at helpline when index is invalid.
2. Report warning at helpline when it's not group event.
3. Use "case '0' ... '9'" to refine the code
4. Split K_RELOAD implementation to another patch.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Sometimes we may need to reload the browser to update the output since
some options are changed.
This patch creates a new key K_RELOAD. Once the __cmd_report() returns
K_RELOAD, it would repeat the whole process, such as, read samples from
data file, sort the data and display in the browser.
v5:
---
1. Fix the 'make NO_SLANG=1' error. Define K_RELOAD in util/hist.h.
2. Skip setup_sorting() in repeat path if last key is K_RELOAD.
v4:
---
Need to quit in perf_evsel_menu__run if key is K_RELOAD.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When performing "perf report --group", it shows the event group
information together. By default, the output is sorted by the first
event in group.
It would be nice for user to select any event for sorting. This patch
introduces a new option "--group-sort-idx" to sort the output by the
event at the index n in event group.
For example,
Before:
# perf report --group --stdio
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
1.56% 0.01% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494ce
1.56% 0.00% 0.00% 0.00% mgen [kernel.kallsyms] [k] task_tick_fair
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
0.00% 0.03% 0.00% 0.00% gsd-color libglib-2.0.so.0.5600.4 [.] g_main_context_check
0.00% 0.03% 0.00% 0.00% swapper [kernel.kallsyms] [k] apic_timer_interrupt
...
After:
# perf report --group --stdio --group-sort-idx 3
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 0
#
# Samples: 12K of events 'cpu/instructions,period=2000003/, cpu/cpu-cycles,period=200003/, BR_MISP_RETIRED.ALL_BRANCHES:pp, cpu/event=0xc0,umask=1,cmask=1,
# Event count (approx.): 6451235635
#
# Overhead Command Shared Object Symbol
# ................................ ......... ....................... ...................................
#
92.19% 98.68% 0.00% 93.30% mgen mgen [.] LOOP1
0.00% 0.13% 0.00% 6.08% swapper [kernel.kallsyms] [k] intel_idle
3.12% 0.29% 0.00% 0.16% gsd-color libglib-2.0.so.0.5600.4 [.] 0x0000000000049515
0.00% 0.00% 0.00% 0.06% swapper [kernel.kallsyms] [k] hrtimer_start_range_ns
1.56% 0.03% 0.00% 0.04% gsd-color libglib-2.0.so.0.5600.4 [.] 0x00000000000494b7
0.00% 0.15% 0.00% 0.04% perf [kernel.kallsyms] [k] smp_call_function_single
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] update_curr
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] apic_timer_interrupt
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] native_apic_msr_eoi_write
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] __update_load_avg_se
0.00% 0.00% 0.00% 0.02% mgen [kernel.kallsyms] [k] scheduler_tick
Now the output is sorted by the fourth event in group.
v7:
---
Rebase to latest perf/core, no other change.
v4:
---
1. Update Documentation/perf-report.txt to mention
'--group-sort-idx' support multiple groups with different
amount of events and it should be used on grouped events.
2. Update __hpp__group_sort_idx(), just return when the
idx is out of limit.
3. Return failure on symbol_conf.group_sort_idx && !session->evlist->nr_groups.
So now we don't need to use together with --group.
v3:
---
Refine the code in __hpp__group_sort_idx().
Before:
for (i = 1; i < nr_members; i++) {
if (i == idx) {
ret = field_cmp(fields_a[i], fields_b[i]);
if (ret)
goto out;
}
}
After:
if (idx >= 1 && idx < nr_members) {
ret = field_cmp(fields_a[idx], fields_b[idx]);
if (ret)
goto out;
}
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200220013616.19916-2-yao.jin@linux.intel.com
[ Renamed pair_fields_alloc() to hist_entry__new_pair() and combined decl + assignment of vars ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In previous patch, we have supported the annotation functionality even
without symbols.
For this patch, it supports the hotkey 'a' on address in report view.
Note that, for branch mode, we only support the annotation for "branch
to" address.
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-4-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
For perf report on stripped binaries it is currently impossible to do
annotation. The annotation state is all tied to symbols, but there are
either no symbols, or symbols are not covering all the code.
We should support the annotation functionality even without symbols.
This patch fakes a symbol and the symbol name is the string of address.
After that, we just follow current annotation working flow.
For example,
1. perf report
Overhead Command Shared Object Symbol
20.67% div libc-2.27.so [.] __random_r
17.29% div libc-2.27.so [.] __random
10.59% div div [.] 0x0000000000000628
9.25% div div [.] 0x0000000000000612
6.11% div div [.] 0x0000000000000645
2. Select the line of "10.59% div div [.] 0x0000000000000628" and ENTER.
Annotate 0x0000000000000628
Zoom into div thread
Zoom into div DSO (use the 'k' hotkey to zoom directly into the kernel)
Browse map details
Run scripts for samples of symbol [0x0000000000000628]
Run scripts for all samples
Switch to another data file in PWD
Exit
3. Select the "Annotate 0x0000000000000628" and ENTER.
Percent│
│
│
│ Disassembly of section .text:
│
│ 0000000000000628 <.text+0x68>:
│ divsd %xmm4,%xmm0
│ divsd %xmm3,%xmm1
│ movsd (%rsp),%xmm2
│ addsd %xmm1,%xmm0
│ addsd %xmm2,%xmm0
│ movsd %xmm0,(%rsp)
Now we can see the dump of object starting from 0x628.
v5:
---
Remove the hotkey 'a' implementation from this patch. It
will be moved to a separate patch.
v4:
---
1. Support the hotkey 'a'. When we press 'a' on address,
now it supports the annotation.
2. Change the patch title from
"Support interactive annotation of code without symbols" to
"perf report: Support interactive annotation of code without symbols"
v3:
---
Keep just the ANNOTATION_DUMMY_LEN, and remove the
opts->annotate_dummy_len since it's the "maybe in future
we will provide" feature.
v2:
---
Fix a crash issue when annotating an address in "unknown" object.
The steps to reproduce this issue:
perf record -e cycles:u ls
perf report
75.29% ls ld-2.27.so [.] do_lookup_x
23.64% ls ld-2.27.so [.] __GI___tunables_init
1.04% ls [unknown] [k] 0xffffffff85c01210
0.03% ls ld-2.27.so [.] _start
When annotating 0xffffffff85c01210, the crash happens.
v2 adds checking for ms->map in add_annotate_opt(). If the object is
"unknown", ms->map is NULL.
Committer notes:
Renamed new_annotate_sym() to symbol__new_unresolved().
Use PRIx64 to fix this issue in some 32-bit arches:
ui/browsers/hists.c: In function 'symbol__new_unresolved':
ui/browsers/hists.c:2474:38: error: format '%lx' expects argument of type 'long unsigned int', but argument 5 has type 'u64' {aka 'long long unsigned int'} [-Werror=format=]
snprintf(name, sizeof(name), "%-#.*lx", BITS_PER_LONG / 4, addr);
~~~~~~^ ~~~~
%-#.*llx
Signed-off-by: Jin Yao <yao.jin@linux.intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20200227043939.4403-3-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
There is a place in the code where open-coded version of list entry accessors
list_last_entry() is used.
Replace that with the standard macro.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/r/20200324122023.9649-3-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Between printing the debug message and actual check atomic counter can be
altered. For better debugging experience read atomic counter value only once.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Tested-by: Ferry Toth <fntoth@gmail.com>
Link: https://lore.kernel.org/r/20200324122023.9649-2-andriy.shevchenko@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reading from a debugfs file at a nonzero position, without first reading
at position 0, leaks uninitialized memory to userspace.
It's a bit tricky to do this, since lseek() and pread() aren't allowed
on these files, and write() doesn't update the position on them. But
writing to them with splice() *does* update the position:
#define _GNU_SOURCE 1
#include <fcntl.h>
#include <stdio.h>
#include <unistd.h>
int main()
{
int pipes[2], fd, n, i;
char buf[32];
pipe(pipes);
write(pipes[1], "0", 1);
fd = open("/sys/kernel/debug/fault_around_bytes", O_RDWR);
splice(pipes[0], NULL, fd, NULL, 1, 0);
n = read(fd, buf, sizeof(buf));
for (i = 0; i < n; i++)
printf("%02x", buf[i]);
printf("\n");
}
Output:
5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a5a30
Fix the infoleak by making simple_attr_read() always fill
simple_attr::get_buf if it hasn't been filled yet.
Reported-by: syzbot+fcab69d1ada3e8d6f06b@syzkaller.appspotmail.com
Reported-by: Alexander Potapenko <glider@google.com>
Fixes: acaefc25d2 ("[PATCH] libfs: add simple attribute files")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Acked-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20200308023849.988264-1-ebiggers@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The vgic-state debugfs file could do with showing the pending state
of the HW-backed SGIs. Plug it into the low-level code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-24-maz@kernel.org
Now that we have HW-accelerated SGIs being delivered to VPEs, it
becomes required to map the VPEs on all ITSs instead of relying
on the lazy approach that we would use when using the ITS-list
mechanism.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-17-maz@kernel.org
Just like for VLPIs, it is beneficial to avoid trapping on WFI when the
vcpu is using the GICv4.1 SGIs.
Add such a check to vcpu_clear_wfx_traps().
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-23-maz@kernel.org
Each time a Group-enable bit gets flipped, the state of these bits
needs to be forwarded to the hardware. This is a pretty heavy
handed operation, requiring all vcpus to reload their GICv4
configuration. It is thus implemented as a new request type.
These enable bits are programmed into the HW by setting the VGrp{0,1}En
fields of GICR_VPENDBASER when the vPEs are made resident again.
Of course, we only support Group-1 for now...
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-22-maz@kernel.org
The GICv4.1 architecture gives the hypervisor the option to let
the guest choose whether it wants the good old SGIs with an
active state, or the new, HW-based ones that do not have one.
For this, plumb the configuration of SGIs into the GICv3 MMIO
handling, present the GICD_TYPER2.nASSGIcap to the guest,
and handle the GICD_CTLR.nASSGIreq setting.
In order to be able to deal with the restore of a guest, also
apply the GICD_CTLR.nASSGIreq setting at first run so that we
can move the restored SGIs to the HW if that's what the guest
had selected in a previous life.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-21-maz@kernel.org
In order to hide some of the differences between v4.0 and v4.1, move
the doorbell management out of the KVM code, and into the GICv4-specific
layer. This allows the calling code to ask for the doorbell when blocking,
and otherwise to leave the doorbell permanently disabled.
This matches the v4.1 code perfectly, and only results in a minor
refactoring of the v4.0 code.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-14-maz@kernel.org
In order to let a guest buy in the new, active-less SGIs, we
need to be able to switch between the two modes.
Handle this by stopping all guest activity, transfer the state
from one mode to the other, and resume the guest. Nothing calls
this code so far, but a later patch will plug it into the MMIO
emulation.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-20-maz@kernel.org
Just like for vLPIs, there is some configuration information that cannot
be directly communicated through the normal irqchip API, and we have to
use our good old friend set_vcpu_affinity as a side-band communication
mechanism.
This is used to configure group and priority for a given vSGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-13-maz@kernel.org
Most of the GICv3 emulation code that deals with SGIs now has to be
aware of the v4.1 capabilities in order to benefit from it.
Add such support, keyed on the interrupt having the hw flag set and
being a SGI.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-19-maz@kernel.org
As GICv4.1 understands the life cycle of doorbells (instead of
just randomly firing them at the most inconvenient time), just
enable them at irq_request time, and be done with it.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-18-maz@kernel.org
To implement the get/set_irqchip_state callbacks (limited to the
PENDING state), we have to use a particular set of hacks:
- Reading the pending state is done by using a pair of new redistributor
registers (GICR_VSGIR, GICR_VSGIPENDR), which allow the 16 interrupts
state to be retrieved.
- Setting the pending state is done by generating it as we'd otherwise do
for a guest (writing to GITS_SGIR).
- Clearing the pending state is done by emitting a VSGI command with the
"clear" bit set.
This requires some interesting locking though:
- When talking to the redistributor, we must make sure that the VPE
affinity doesn't change, hence taking the VPE lock.
- At the same time, we must ensure that nobody accesses the same
redistributor's GICR_VSGIR registers for a different VPE, which
would corrupt the reading of the pending bits. We thus take the
per-RD spinlock. Much fun.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-12-maz@kernel.org
Implement mask/unmask for virtual SGIs by calling into the
configuration helper.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-11-maz@kernel.org
The GICv4.1 ITS has yet another new command (VSGI) which allows
a VPE-targeted SGI to be configured (or have its pending state
cleared). Add support for this command and plumb it into the
activate irqdomain callback so that it is ready to be used.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20200304203330.4967-10-maz@kernel.org
Since GICv4.1 has the capability to inject 16 SGIs into each VPE,
and that I'm keen not to invent too many specific interfaces to
manipulate these interrupts, let's pretend that each of these SGIs
is an actual Linux interrupt.
For that matter, let's introduce a minimal irqchip and irqdomain
setup that will get fleshed up in the following patches.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Reviewed-by: Zenghui Yu <yuzenghui@huawei.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Link: https://lore.kernel.org/r/20200304203330.4967-9-maz@kernel.org
This datum is not referenced from .idmap.text: it does not need to be
mapped in idmap. Lets move it to .rodata as it is never written to after
early boot of the primary CPU.
(Maybe .data.ro_after_init would be cleaner though?)
Signed-off-by: Rémi Denis-Courmont <remi@remlab.net>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
In practice, this requires only 2 instructions, or even only 1 for
the idmap_pg_dir size (with 4 or 64 KiB pages). Only the MAIR values
needed more than 2 instructions and it was already converted to mov_q
by 95b3f74bec.
Signed-off-by: Remi Denis-Courmont <remi.denis.courmont@huawei.com>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Acked-by: Mark Rutland <mark.rutland@arm.com>
Fix printk format warning by using %z for size_t modifier:
../drivers/bus/mhi/core/boot.c: In function `mhi_rddm_prepare':
../drivers/bus/mhi/core/boot.c:55:15: warning: format `%lx' expects argument of type `long unsigned int', but argument 5 has type `size_t {aka unsigned int}' [-Wformat=]
dev_dbg(dev, "Address: %p and len: 0x%lx sequence: %u
",
Link: http://lkml.kernel.org/r/c4852a82-cdb9-6318-70a4-96ccb4ba5af2@infradead.org
Fixes: 6fdfdd2732 ("bus: mhi: core: Add support for downloading RDDM image during panic")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Cc: Hemant Kumar <hemantk@codeaurora.org>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Link: https://lore.kernel.org/r/20200324022505.UiPPJZVXX%akpm@linux-foundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
void (*read_buff_add) argument didn't have an identifier name,
adding a name to it like the rest of all functions' arguments.
Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/b2a1ca962553194840d8cd2bf1f7d3174e3b1336.1585046066.git.jane.pnx9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Modifying struct allocation in kmalloc() to match the
coding standards.
Checkpatch.pl CHECK: Prefer kmalloc(sizeof(*ldisc_data)...)
over kmalloc(sizeof(struct spk_ldisc_data)...)
Signed-off-by: Sam Muhammed <jane.pnx9@gmail.com>
Reviewed-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
Link: https://lore.kernel.org/r/19494bdab5709693126e0c0ee14b179a3b601207.1585046066.git.jane.pnx9@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ralink,rt2880-uart is compatible with ns16550a and all other
instances of RT2880 UART nodes include it in the compatible property.
Add it also here, to make the binding schema simpler.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Mans Rullgard <mans@mansr.com>
Link: https://lore.kernel.org/r/20200320174107.29406-8-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
XScale serial port driver is perfectly capable of supporting this hardware. A
separate compatible string is probably a historical mess.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-7-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A preferred node name for serial ports is "serial":
mmp2-olpc-xo-1-75.dt.yaml: uart@d4030000: $nodename:0: 'uart@d4030000'
does not match '^serial(@[0-9a-f,]+)*$'
...
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-6-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the nodes by their phandle references instead of recreating the
tree and declaring references of the same names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-5-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Some drivers that claim to support mrvl,mmp-uart default to a reg-shift
of two, some don't. Be explicit to be on a safe side.
With that in place, a XScale serial port driver is perfectly capable of
supporting the MMP serial port. Add a compatible string.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-4-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There's a preferred node name for serial ports, and it's not "uart":
pxa910-dkb.dt.yaml: uart@d4017000: $nodename:0: 'uart@d4017000'
does not match '^serial(@[0-9a-f,]+)*$'
...
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-3-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Extend the nodes by their phandle references instead of recreating the
tree and declaring references of the same names.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20200320174107.29406-2-lkundrak@v3.sk
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The definitons in the dt-binding's gpio header only contains some
constants to be used in device trees. It is not relevant for omap-serial
(as the gpio API hides the details) and in fact unused so it can just be
dropped.
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20200321204031.30369-1-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The timer is disarmed when switching between TSC deadline and other modes,
we should set everything to disarmed state, however, LAPIC timer can be
emulated by preemption timer, it still works if vmx->hv_deadline_timer is
not -1. This patch also cancels preemption timer when disarm LAPIC timer.
Signed-off-by: Wanpeng Li <wanpengli@tencent.com>
Message-Id: <1585031530-19823-1-git-send-email-wanpengli@tencent.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
UART on K3 SoCs has configurable RX timeout behavior (controlled via
EFR2) and better DMA integration. This allows to transfer as larger
amount data per DMA transfer compared to older SoCs. Add support for
the same.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-7-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
As per Advisory 27 of AM437x Silicon errata document, Spurious UART
interrupts may occur when DMA mode (FCR.DMA_MODE) is enabled. The
Interrupt Controller flags that a UART interrupt has occurred; however,
the associated IT_PENDING bit remains set to 1, indicating that no
interrupt is pending. Acknowledge the spurious interrupts for every
occurrence as workaround.
Errata is applicable to all TI SoCs with this IP.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-6-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Although same 8250 compliant UART IP is reused across different SoC,
their integration wrt DMA varies greatly across SoCs. Therefore,
different SoC may need to use different FIFO trigger level for DMA
event and DMA configuration parameters. Provide a way to pass this
information via driver data. This is required to support UART DMA on
AM654/J721e SoCs.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-5-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Caller functions of __dma_rx_do_complete() already hold rx_dma_lock.
Therefore move locking out of the function to avoid need to release and
reacquire lock.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-4-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Take into account data stuck in DMA internal buffers before pushing data
to higher layer. dma_tx_state has "in_flight_bytes" member that provides
this information.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-3-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Terminate and flush DMA internal buffers, before pushing RX data to
higher layer. Otherwise, this will lead to data corruption, as driver
would end up pushing stale buffer data to higher layer while actual data
is still stuck inside DMA hardware and has yet not arrived at the
memory.
While at that, replace deprecated dmaengine_terminate_all() with
dmaengine_terminate_async().
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319110344.21348-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Call stop_rx() to halt reception when throttle is requested. Update
unthrottle callback to restart reception.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319103230.16867-3-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When port's throttle callback is called, it should stop pushing any more
data into TTY buffer to avoid buffer overflow. This means driver has to
stop HW from receiving more data and assert the HW flow control. For
UARTs with auto HW flow control (such as 8250_omap) manual assertion of
flow control line is not possible and only way is to allow RX FIFO to
fill up, thus trigger auto HW flow control logic.
Therefore make sure that 8250 generic IRQ handler does not drain data
when port is stopped (i.e UART_LSR_DR is unset in read_status_mask). Not
servicing, RX FIFO would trigger auto HW flow control when FIFO
occupancy reaches preset threshold, thus halting RX.
Since, error conditions in UART_LSR register are cleared just by reading
the register, data has to be drained in case there are FIFO errors, else
error information will lost.
Signed-off-by: Vignesh Raghavendra <vigneshr@ti.com>
Link: https://lore.kernel.org/r/20200319103230.16867-2-vigneshr@ti.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure that all bytes are transmitted out of Uart by monitoring
CDNS_UART_SR_TACTIVE bit as well.
Signed-off-by: Raviteja Narayanam <raviteja.narayanam@xilinx.com>
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@xilinx.com>
Acked-by: Maarten Brock <m.brock@vanmierlo.com>
Link: https://lore.kernel.org/r/e2514818af5973be291cc117d07739f068b71639.1584610774.git.shubhrajyoti.datta@xilinx.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
