Enable DMI scanning on the MIPS architecture, this setups DMI identifiers
(dmi_system_id) for printing it out on task dumps and prepares DIMM entry
information (dmi_memdev_info) from the SMBIOS table. With this patch, the
driver can easily match various of mainboards.
In the SMBIOS reference specification, the table anchor string "_SM_" is
present in the address range 0xF0000 to 0xFFFFF on a 16-byte boundary,
but there exists a special case for Loongson platform, when call function
dmi_early_remap, it should specify the start address to 0xFFFE000 due to
it is reserved for SMBIOS and can be normally access in the BIOS.
This patch works fine on the Loongson 3A3000 platform which belongs to
MIPS architecture and has no influence on the other architectures such
as x86 and ARM.
Additionally, in order to avoid the unknown risks on the mips platform
which is not MACH_LOONGSON64, the DMI config is better to depend on
MACH_LOONGSON64. If other mips platform also needs this DMI feature in
the future, the "depends on" condition can be modified.
Co-developed-by: Yinglu Yang <yangyinglu@loongson.cn>
Signed-off-by: Yinglu Yang <yangyinglu@loongson.cn>
[jiaxun.yang@flygoat.com: Refine definitions and Kconfig]
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Use SMBIOS_ENTRY_POINT_SCAN_START instead of 0xF0000, because other
archtecture maybe use a special start address such as 0xFFFE000 for
Loongson platform.
Signed-off-by: Tiezhu Yang <yangtiezhu@loongson.cn>
Reviewed-by: Jean Delvare <jdelvare@suse.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
mt7621 SoC has its own 'ralink_soc_info' structure with some
information about the soc itself. Pcie controller and pcie phy
drivers for this soc which are still in staging git tree make uses
of 'soc_device_attribute' looking for revision 'E2' in order to
know if reset lines are or not inverted. This way of doing things
seems to be necessary in order to make things clean and properly.
Hence, introduce this 'soc_device' to be able to properly use those
attributes in drivers. Also set 'data' pointer points to the struct
'ralink_soc_info' to be able to export also current soc information
using this mechanism.
Cc: Paul Burton <paul.burton@mips.com>
Cc: ralf@linux-mips.org
Cc: jhogan@kernel.org
Cc: john@phrozen.org
Cc: NeilBrown <neil@brown.name>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The WARN_ON macros are used at the entry functions state2power() and
set_cur_state().
state2power() is called with the max_state retrieved from
get_max_state which returns cpufreq_cdev->max_level, then it check if
max_state is > cpufreq_cdev->max_level. The test does not really makes
sense but let's assume we want to make sure to catch an error if the
code evolves. However the WARN_ON is overkill.
set_cur_state() is also called from userspace if we write to the
sysfs. It is easy to see a stack dumped by just writing to sysfs
/sys/class/thermal/cooling_device0/cur_state a value greater than
"max_level". A bit scary. Returing -EINVAL is enough.
Remove these WARN_ON.
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://lore.kernel.org/r/20200321193107.21590-1-daniel.lezcano@linaro.org
When setting the cooling device current state from userspace via sysfs,
the operation fails by returning an -EINVAL.
It appears the recent changes with the per-policy frequency QoS
introduced a regression as reported by:
https://lkml.org/lkml/2020/3/20/599
The function freq_qos_update_request returns 0 or 1 describing update
effectiveness, and a negative error code on failure. However,
cpufreq_set_cur_state returns 0 on success or an error code otherwise.
Consider the QoS update as successful if the function does not return
an error.
Fixes: 3000ce3c52 ("cpufreq: Use per-policy frequency QoS")
Signed-off-by: Willy Wolff <willy.mh.wolff.ml@gmail.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200321092740.7vvwfxsebcrznydh@macmini.local
i.MX8MP shares same TMU with i.MX8MM, the only difference is i.MX8MP
has two thermal sensors while i.MX8MM ONLY has one, add multiple sensors
support for i.MX8MM TMU driver.
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1584674791-9717-2-git-send-email-Anson.Huang@nxp.com
The current codebase makes use of the zero-length array language
extension to the C90 standard, but the preferred mechanism to declare
variable-length types such as these ones is a flexible array member[1][2],
introduced in C99:
struct foo {
int stuff;
struct boo array[];
};
By making use of the mechanism above, we will get a compiler warning
in case the flexible array does not occur last in the structure, which
will help us prevent some kind of undefined behavior bugs from being
inadvertently introduced[3] to the codebase from now on.
Also, notice that, dynamic memory allocations won't be affected by
this change:
"Flexible array members have incomplete type, and so the sizeof operator
may not be applied. As a quirk of the original implementation of
zero-length arrays, sizeof evaluates to zero."[1]
This issue was found with the help of Coccinelle.
[1] https://gcc.gnu.org/onlinedocs/gcc/Zero-Length.html
[2] https://github.com/KSPP/linux/issues/21
[3] commit 7649773293 ("cxgb3/l2t: Fix undefined behaviour")
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200319184838.GA25767@embeddedor.com
The temperature value passed from SCU could be negative value,
the data type should be signed instead of unsigned.
Fixes: e20db70dba ("thermal: imx_sc: add i.MX system controller thermal support")
Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Amit Kucheria <amit.kucheria@linaro.org>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/1584606380-9972-1-git-send-email-Anson.Huang@nxp.com
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Pandruvada, Srinivas <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/20200311092718.24052-1-tiwai@suse.de
After copying Arm64's perf archive with object files and perf.data file
to x86 laptop, the x86's perf kernel symbol resolution fails. It
outputs 'unknown' for all symbols parsing.
This issue is root caused by the function elf__needs_adjust_symbols(),
x86 perf tool uses one weak version, Arm64 (and powerpc) has rewritten
their own version. elf__needs_adjust_symbols() decides if need to parse
symbols with the relative offset address; but x86 building uses the weak
function which misses to check for the elf type 'ET_DYN', so that it
cannot parse symbols in Arm DSOs due to the wrong result from
elf__needs_adjust_symbols().
The DSO parsing should not depend on any specific architecture perf
building; e.g. x86 perf tool can parse Arm and Arm64 DSOs, vice versa.
And confirmed by Naveen N. Rao that powerpc64 kernels are not being
built as ET_DYN anymore and change to ET_EXEC.
This patch removes the arch specific functions for Arm64 and powerpc and
changes elf__needs_adjust_symbols() as a common function.
In the common elf__needs_adjust_symbols(), it checks an extra condition
'ET_DYN' for elf header type. With this fixing, the Arm64 DSO can be
parsed properly with x86's perf tool.
Before:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 [unknown] ([kernel.kallsyms]) => ffff800010c4eaec [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec [unknown] ([kernel.kallsyms]) => ffff800010c4eb00 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 [unknown] ([kernel.kallsyms]) => ffff800010c4e780 [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 [unknown] ([kernel.kallsyms]) => ffff800010c4eeac [unknown] ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc [unknown] ([kernel.kallsyms]) => ffff800010c4ed80 [unknown] ([kernel.kallsyms])
After:
# perf script
main 3258 1 branches: 0 [unknown] ([unknown]) => ffff800010c4665c coresight_timeout+0x54 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c46670 coresight_timeout+0x68 ([kernel.kallsyms]) => ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eaec etm4_enable_hw+0x3cc ([kernel.kallsyms]) => ffff800010c4eb00 etm4_enable_hw+0x3e0 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eb08 etm4_enable_hw+0x3e8 ([kernel.kallsyms]) => ffff800010c4e780 etm4_enable_hw+0x60 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4e7a0 etm4_enable_hw+0x80 ([kernel.kallsyms]) => ffff800010c4eeac etm4_enable+0x2d4 ([kernel.kallsyms])
main 3258 1 branches: ffff800010c4eebc etm4_enable+0x2e4 ([kernel.kallsyms]) => ffff800010c4ed80 etm4_enable+0x1a8 ([kernel.kallsyms])
v3: Changed to check for ET_DYN across all architectures.
v2: Fixed Arm64 and powerpc native building.
Reported-by: Mike Leach <mike.leach@linaro.org>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Allison Randal <allison@lohutok.net>
Cc: Enrico Weigelt <info@metux.net>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kate Stewart <kstewart@linuxfoundation.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Thomas Richter <tmricht@linux.vnet.ibm.com>
Link: http://lore.kernel.org/lkml/20200306015759.10084-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Reproducible with a clang asan build and then running perf test in
particular 'Parse event definition strings'.
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: clang-built-linux@googlegroups.com
Link: http://lore.kernel.org/lkml/20200314170356.62914-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Commit 71994620bb ("virtio_balloon: replace oom notifier with shrinker")
changed the behavior when deflation happens automatically. Instead of
deflating when called by the OOM handler, the shrinker is used.
However, the balloon is not simply some slab cache that should be
shrunk when under memory pressure. The shrinker does not have a concept of
priorities, so this behavior cannot be configured.
There was a report that this results in undesired side effects when
inflating the balloon to shrink the page cache. [1]
"When inflating the balloon against page cache (i.e. no free memory
remains) vmscan.c will both shrink page cache, but also invoke the
shrinkers -- including the balloon's shrinker. So the balloon
driver allocates memory which requires reclaim, vmscan gets this
memory by shrinking the balloon, and then the driver adds the
memory back to the balloon. Basically a busy no-op."
The name "deflate on OOM" makes it pretty clear when deflation should
happen - after other approaches to reclaim memory failed, not while
reclaiming. This allows to minimize the footprint of a guest - memory
will only be taken out of the balloon when really needed.
Especially, a drop_slab() will result in the whole balloon getting
deflated - undesired. While handling it via the OOM handler might not be
perfect, it keeps existing behavior. If we want a different behavior, then
we need a new feature bit and document it properly (although, there should
be a clear use case and the intended effects should be well described).
Keep using the shrinker for VIRTIO_BALLOON_F_FREE_PAGE_HINT, because
this has no such side effects. Always register the shrinker with
VIRTIO_BALLOON_F_FREE_PAGE_HINT now. We are always allowed to reuse free
pages that are still to be processed by the guest. The hypervisor takes
care of identifying and resolving possible races between processing a
hinting request and the guest reusing a page.
In contrast to pre commit 71994620bb ("virtio_balloon: replace oom
notifier with shrinker"), don't add a moodule parameter to configure the
number of pages to deflate on OOM. Can be re-added if really needed.
Also, pay attention that leak_balloon() returns the number of 4k pages -
convert it properly in virtio_balloon_oom_notify().
Note1: using the OOM handler is frowned upon, but it really is what we
need for this feature.
Note2: without VIRTIO_BALLOON_F_MUST_TELL_HOST (iow, always with QEMU) we
could actually skip sending deflation requests to our hypervisor,
making the OOM path *very* simple. Besically freeing pages and
updating the balloon. If the communication with the host ever
becomes a problem on this call path.
[1] https://www.spinics.net/lists/linux-virtualization/msg40863.html
Test report by Tyler Sanderson:
Test setup: VM with 16 CPU, 64GB RAM. Running Debian 10. We have a 42
GB file full of random bytes that we continually cat to /dev/null.
This fills the page cache as the file is read. Meanwhile we trigger
the balloon to inflate, with a target size of 53 GB. This setup causes
the balloon inflation to pressure the page cache as the page cache is
also trying to grow. Afterwards we shrink the balloon back to zero (so
total deflate = total inflate).
Without patch (kernel 4.19.0-5):
Inflation never reaches the target until we stop the "cat file >
/dev/null" process. Total inflation time was 542 seconds. The longest
period that made no net forward progress was 315 seconds (see attached
graph).
Result of "grep balloon /proc/vmstat" after the test:
balloon_inflate 154828377
balloon_deflate 154828377
With patch (kernel 5.6.0-rc4+):
Total inflation duration was 63 seconds. No deflate-queue activity
occurs when pressuring the page-cache.
Result of "grep balloon /proc/vmstat" after the test:
balloon_inflate 12968539
balloon_deflate 12968539
Conclusion: This patch fixes the issue. In the test it reduced
inflate/deflate activity by 12x, and reduced inflation time by 8.6x.
But more importantly, if we hadn't killed the "grep balloon
/proc/vmstat" process then, without the patch, the inflation process
would never reach the target.
Attached [1] is a png of a graph showing the problematic behavior without
this patch. It shows deflate-queue activity increasing linearly while
balloon size stays constant over the course of more than 8 minutes of
the test.
[1] https://lore.kernel.org/linux-mm/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com/2-without_patch.png
Full test report and discussion [2]:
[2] https://lore.kernel.org/r/CAJuQAmphPcfew1v_EOgAdSFiprzjiZjmOf3iJDmFX0gD6b9TYQ@mail.gmail.com
Tested-by: Tyler Sanderson <tysand@google.com>
Reported-by: Tyler Sanderson <tysand@google.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Wei Wang <wei.w.wang@intel.com>
Cc: Alexander Duyck <alexander.h.duyck@linux.intel.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Nadav Amit <namit@vmware.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Link: https://lore.kernel.org/r/20200205163402.42627-4-david@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The feature VIRTIO_NET_F_HASH_REPORT extends the
layout of the packet and requests the device to
calculate hash on incoming packets and report it
in the packet header.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-4-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
RSS (Receive-side scaling) defines hash calculation
rules and decision on receive virtqueue according to
the calculated hash, provided mask to apply and
provided indirection table containing indices of
receive virqueues. The driver sends the control
command to enable multiqueue and provide parameters
for receive steering.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-3-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
VIRTIO_NET_F_RSC_EXT feature bit indicates that the device
is able to provide extended RSC information. When the feature
is negotiatede and 'gso_type' field in received packet is not
GSO_NONE, the device reports number of coalesced packets in
'csum_start' field and number of duplicated acks in 'csum_offset'
field and sets VIRTIO_NET_HDR_F_RSC_INFO in 'flags' field.
Signed-off-by: Yuri Benditovich <yuri.benditovich@daynix.com>
Link: https://lore.kernel.org/r/20200302115003.14877-2-yuri.benditovich@daynix.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Handy for testing with distro kernels.
Warn that the resulting module is completely unsupported,
and isn't intended for production use.
Usage:
make oot # builds vhost_test.ko, vhost.ko
make oot-clean # cleans out files created
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently, CLFLUSH is used to flush SEV guest memory before the guest is
terminated (or a memory hotplug region is removed). However, CLFLUSH is
not enough to ensure that SEV guest tagged data is flushed from the cache.
With 33af3a7ef9 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations"), the
original WBINVD was removed. This then exposed crashes at random times
because of a cache flush race with a page that had both a hypervisor and
a guest tag in the cache.
Restore the WBINVD when destroying an SEV guest and add a WBINVD to the
svm_unregister_enc_region() function to ensure hotplug memory is flushed
when removed. The DF_FLUSH can still be avoided at this point.
Fixes: 33af3a7ef9 ("KVM: SVM: Reduce WBINVD/DF_FLUSH invocations")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Message-Id: <c8bf9087ca3711c5770bdeaafa3e45b717dc5ef4.1584720426.git.thomas.lendacky@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Pull ARM cpufreq drivers updates for v5.7 from Viresh Kumar:
"This pull request contains:
- update to imx cpufreq drivers to improve their support (Anson Huang,
Christoph Niedermaier, and Peng Fan).
- Update to qcom cpufreq to support other krait based SoCs (Ansuel
Smith).
- Update ti cpufreq driver to support OPP_PLUS (Lokesh Vutla).
- Update cpufreq-dt driver to allow platfoem specific intermediate
callbacks (Peng Fan)."
* 'cpufreq/arm/linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
cpufreq: qcom: Add support for krait based socs
cpufreq: imx6q-cpufreq: Improve the logic of -EPROBE_DEFER handling
cpufreq: dt: Allow platform specific intermediate callbacks
cpufreq: imx-cpufreq-dt: Correct i.MX8MP's market segment fuse location
cpufreq: imx6q: read OCOTP through nvmem for imx6q
cpufreq: imx6q: fix error handling
cpufreq: imx-cpufreq-dt: Add "cpu-supply" property check
cpufreq: ti-cpufreq: Add support for OPP_PLUS
cpufreq: imx6q: Fixes unwanted cpu overclocking on i.MX6ULL
a) configure for supporting modules
Not all drivers need to be compiled into the kernel.
Support building and loading of kernel modules.
b) compile leds-gpio driver into the kernel and configure for LED triggers
DTS has been augmented to add some gpio-leds. We need the leds-gpio driver
and enable the triggers.
c) configure CONFIG_REGULATOR_ACT8865 for PMU
The PMU on the CI20 board is an ACT8600 using the ACT8865 driver.
Since it is not compiled, the PMU and the CI20 board is running in
power-on reset state of the PMU.
d) compile gpio-ir driver
The CI20 board has a gpio based IR receiver.
e) configure for CONFIG_KEYBOARD_GPIO=m
The SW1 button is hooked up to send input events.
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
a) add DT node for SW1 as Enter button
The SW1 button can be used as a simple one-button keyboard
and is connected to PD17.
Note: SW1 has a second meaning to change the boot sequence
when pressed while powering on.
b) give eth0_power a defined voltage.
This is a 3.3V power switch (DVNET3.3V).
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The infrared sensor on the CI20 board is connected to a GPIO and can
be operated by using the gpio-ir-recv driver. Add a DT node for the
sensor to allow that driver to be used.
Signed-off-by: Alex Smith <alex.smith@imgtec.com>
Signed-off-by: H. Nikolaus Schaller <hns@goldelico.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
With the removal of the s390 hibernate support the suspend and
resume callbacks for the ap devices are not needed any more.
This patch removes the callbacks and the ap bus' registration
struct for the power management.
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When UID checking is enabled a UID value of 0 is invalid and can not be
set by the user. On z/VM it is however used to indicate an unset UID.
Until now, this lead to the behavior that one PCI function could be
attached with UID 0 after which z/VM would prohibit further attachment.
Now if the user then turns off UID checking in z/VM the user could
seemingly attach additional PCI functions that would however not show up
in Linux as that would not be informed of the change in UID checking
mode. This is unexpected and confusing and lead to bug reports against
Linux.
Instead now, if we encounter an unset UID value of 0 treat it as
indicating that UID checking was turned off, switch to automatic domain
allocation, and warn the user of the possible misconfiguration.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Until now zpci_alloc_domain() only prevented more than
CONFIG_PCI_NR_FUNCTIONS from being added when using automatic domain
allocation. When explicit UIDs were defined UIDs above
CONFIG_PCI_NR_FUNCTIONS were not counted at all.
When more PCI functions are added this could lead to various errors
including under sized IRQ vectors and similar issues.
Fix this by explicitly tracking the number of allocated domains.
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Reviewed-by: Pierre Morel <pmorel@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
When issuing a SADC for a QDIO device, don't hardcode the ISC but use
whatever is specified in qdio's handler for Adapter Interrupts.
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Reviewed-by: Benjamin Block <bblock@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
ARCH_SAVE_PAGE_KEYS has been introduced in order to be able to save
and restore s390 specific storage keys into a hibernation image.
With hibernation support removed from s390 there is no point in
keeping the callbacks.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Hibernation is known to be broken for many years on s390. Given that
there aren't any real use cases, remove the code instead of spending
time to fix and maintain it.
Without hibernate support it doesn't make too much sense to keep power
management support; therefore remove it completely.
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Acked-by: Peter Oberparleiter <oberpar@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
In the past there were no per-CPU information in /proc/cpuinfo
other than CPU frequency. Hence, for machines without CPU MHz
feature there were nothing to show. Now CPU topology and IDs
still could be shown, so do not skip this information from the
output.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: moved comparison]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
/proc/cpuinfo should not print information about CPU 0 when it is offline.
Fixes: 281eaa8cb6 ("s390/cpuinfo: simplify locking and skip offline cpus early")
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
[heiko.carstens@de.ibm.com: shortened commit message]
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Show number of online CPUs within a package (which is
the socket in case of s390). For what it worth, present
that value as "siblings" field - just like x86 does.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Show number of cores that run at least one SMT thread
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Re-IPL for both CCW and FCP is currently done by using diag 308 with the
"Load Clear" subcode, which means that all memory will be cleared.
This can increase re-IPL duration considerably on very large machines.
For CCW devices, there is also a "Load Normal" subcode that was only used
for dump kernels so far. For FCP devices, a similar "Load Normal" subcode
was introduced with z14. The "Load Normal" diag 308 subcode allows to
re-IPL without clearing memory.
This patch adds a new "clear" sysfs attribute to /sys/firmware/reipl for
both the ccw and fcp subdirectories, which can be set to either "0" or "1"
to disable or enable re-IPL with memory clearing. The default value is "0",
which disables memory clearing.
Signed-off-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
snprintf() may not always return the correct size of used bytes but
instead the length the resulting string would be if it would fit into
the buffer. So scnprintf() is the function to use when the real length
of the resulting string is needed.
Replace all occurrences of snprintf() with scnprintf() where the return
code is further processed. Also find and fix some occurrences where
sprintf() was used.
Suggested-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Since snprintf() returns the would-be-output size instead of the
actual output size, the succeeding calls may go beyond the given
buffer limit. Fix it by replacing with scnprintf().
Message-Id: <20200311090915.21059-1-tiwai@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Harald Freudenberger <freude@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
The CPU topology masks on s390 contain also bits of CPUs which
are offline. Currently this is already a problem, since common
code scheduler expects e.g. cpu_smt_mask() to reflect reality.
This update changes the described behaviour and s390 starts to
behave like all other architectures.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Variable cpus_with_topology is a leftover that became
unneeded once the fake NUMA support has been removed.
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Show CPU physical address as reported by STAP instruction
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
There is a maximum of two new tables allocated on page table
upgrade. Because we know that a loop the current implementation
is based on could be unrolled with some improvements:
* upgrade from 3 to 5 levels happens in one go - without an
unnecessary re-take of page_table_lock in-between;
* page tables initialization moved out of the atomic code;
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Reviewed-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
This contains updates to stream and pm handling in the core as well as
updates to Intel drivers for hw sequencing and multi-link.
Details:
Core:
- Updates to stream handling for state machine checks
- Changes to handle potential races for probe/enumeration and init of the bus
- Add no pm version of read and writes
- Support for multiple Slave on same link
- Add read_only_wordlength for simple/reduced ports
Intel:
- Updates to cadence lib to handle hw sequencing
- Support for audio dai calls in intel driver
- Multi link support for cadence lib
Qualcomm:
- Support for get_sdw_stream()
-----BEGIN PGP SIGNATURE-----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=UPKg
-----END PGP SIGNATURE-----
Merge tag 'soundwire-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire into char-misc-next
Vinod writes:
soundwire updates for v5.7-rc1
This contains updates to stream and pm handling in the core as well as
updates to Intel drivers for hw sequencing and multi-link.
Details:
Core:
- Updates to stream handling for state machine checks
- Changes to handle potential races for probe/enumeration and init of the bus
- Add no pm version of read and writes
- Support for multiple Slave on same link
- Add read_only_wordlength for simple/reduced ports
Intel:
- Updates to cadence lib to handle hw sequencing
- Support for audio dai calls in intel driver
- Multi link support for cadence lib
Qualcomm:
- Support for get_sdw_stream()
* tag 'soundwire-5.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire: (43 commits)
soundwire: qcom: add support for get_sdw_stream()
soundwire: stream: Add read_only_wordlength flag to port properties
soundwire: cadence: clear FIFO to avoid pop noise issue on playback start
soundwire: cadence: multi-link support
soundwire: cadence: commit changes in the exit_reset() sequence
soundwire: cadence: remove automatic command retries
soundwire: cadence: remove PREQ_DELAY assignment
soundwire: cadence: enable NORMAL operation in cdns_init()
soundwire: cadence: reorder MCP_CONFIG settings
soundwire: cadence: make SSP interval programmable
soundwire: cadence: move clock/SSP related inits to dedicated function
soundwire: cadence: merge routines to clear/set bits
soundwire: cadence: mask Slave interrupt before stopping clock
soundwire: cadence: fix a io timeout issue in S3 test
soundwire: cadence: add clock_stop/restart routines
soundwire: cadence: handle error cases with CONFIG_UPDATE
soundwire: cadence: add interface to check clock status
soundwire: cadence: simplifiy cdns_init()
soundwire: cadence: s/update_config/config_update
soundwire: stream: use sdw_write instead of update
...
Reformat multi-line dereferencing of function arguments
&cmd->scan_begin_arg. Also reformat another call to the same function to
follow the same argument formatting structure. Problem detected by
checkpatch script.
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: https://lore.kernel.org/r/20200322185932.GA12594@deeUbuntu
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make it so that CEPH_MSG_DATA_PAGES data item can own pages,
fixing a bunch of memory leaks for a page vector allocated in
alloc_msg_with_page_vector(). Currently, only watch-notify
messages trigger this allocation, and normally the page vector
is freed either in handle_watch_notify() or by the caller of
ceph_osdc_notify(). But if the message is freed before that
(e.g. if the session faults while reading in the message or
if the notify is stale), we leak the page vector.
This was supposed to be fixed by switching to a message-owned
pagelist, but that never happened.
Fixes: 1907920324 ("libceph: support for sending notifies")
Reported-by: Roman Penyaev <rpenyaev@suse.de>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Roman Penyaev <rpenyaev@suse.de>
CEPH_OSDMAP_FULL/NEARFULL aren't set since mimic, so we need to consult
per-pool flags as well. Unfortunately the backwards compatibility here
is lacking:
- the change that deprecated OSDMAP_FULL/NEARFULL went into mimic, but
was guarded by require_osd_release >= RELEASE_LUMINOUS
- it was subsequently backported to luminous in v12.2.2, but that makes
no difference to clients that only check OSDMAP_FULL/NEARFULL because
require_osd_release is not client-facing -- it is for OSDs
Since all kernels are affected, the best we can do here is just start
checking both map flags and pool flags and send that to stable.
These checks are best effort, so take osdc->lock and look up pool flags
just once. Remove the FIXME, since filesystem quotas are checked above
and RADOS quotas are reflected in POOL_FLAG_FULL: when the pool reaches
its quota, both POOL_FLAG_FULL and POOL_FLAG_FULL_QUOTA are set.
Cc: stable@vger.kernel.org
Reported-by: Yanhu Cao <gmayyyha@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Acked-by: Sage Weil <sage@redhat.com>
