$(CC) with $(CFLAGS_GCOV) assumes the output filename with .gcno suffix
appended is writable. This is not the case when the output filename is
/dev/null:
HDRTEST drivers/gpu/drm/i915/display/intel_frontbuffer.h
/dev/null:1:0: error: cannot open /dev/null.gcno
HDRTEST drivers/gpu/drm/i915/display/intel_ddi.h
/dev/null:1:0: error: cannot open /dev/null.gcno
make[5]: *** [../drivers/gpu/drm/i915/Makefile:307:
drivers/gpu/drm/i915/display/intel_ddi.hdrtest] Error 1
make[5]: *** Waiting for unfinished jobs....
make[5]: *** [../drivers/gpu/drm/i915/Makefile:307:
drivers/gpu/drm/i915/display/intel_frontbuffer.hdrtest] Error 1
Filter out $(CFLAGS_GVOC) from the header test $(c_flags) as they don't
make sense here anyway.
References: http://lore.kernel.org/r/d8112767-4089-4c58-d7d3-2ce03139858a@infradead.org
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Fixes: c6d4a099a2 ("drm/i915: reimplement header test feature")
Cc: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200221105414.14358-1-jani.nikula@intel.com
(cherry picked from commit 408c1b3253)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Zonefs makes use of iomap internally, so it should also select iomap in
Kconfig.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
IOCB_NOWAIT can't just be ignored as it breaks applications expecting
it not to block. Just refuse the operation as applications must handle
that (e.g. by falling back to a thread pool).
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Clang warns:
In file included from
../drivers/net/ethernet/mellanox/mlx5/core/main.c:73:
../drivers/net/ethernet/mellanox/mlx5/core/diag/rsc_dump.h:4:9: warning:
'__MLX5_RSC_DUMP_H' is used as a header guard here, followed by #define
of a different macro [-Wheader-guard]
#ifndef __MLX5_RSC_DUMP_H
^~~~~~~~~~~~~~~~~
../drivers/net/ethernet/mellanox/mlx5/core/diag/rsc_dump.h:5:9: note:
'__MLX5_RSC_DUMP__H' is defined here; did you mean '__MLX5_RSC_DUMP_H'?
#define __MLX5_RSC_DUMP__H
^~~~~~~~~~~~~~~~~~
__MLX5_RSC_DUMP_H
1 warning generated.
Make them match to get the intended behavior and remove the warning.
Fixes: 12206b1723 ("net/mlx5: Add support for resource dump")
Link: https://github.com/ClangBuiltLinux/linux/issues/897
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We can avoid an indirect call per compressed completion wrapping the
completion handling call with the appropriate helper.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We can avoid an indirect call per NAPI cycle wrapping the RX descriptors
posting call with the appropriate helper.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Reviewed-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The current steps that are performed when the trust state changes, if
the channels are active:
1. The trust state is changed in hardware.
2. The new inline mode is calculated.
3. If the new inline mode is different, the channels are recreated using
the new inline mode.
This approach has some issues:
1. There is a time gap between changing trust state in hardware and
starting sending enough inline headers (the latter happens after
recreation of channels). It leads to failed transmissions and error
CQEs.
2. If the new channels fail to open, we'll be left with the old ones,
but the hardware will be configured for the new trust state, so the
interval when we can see TX errors never ends.
This patch fixes the issues above by moving the trust state change into
the preactivate hook that runs during the recreation of the channels
when no channels are active, so it eliminates the gap of partially
applied configuration. If the inline mode doesn't change with the change
of the trust state, the channels won't be recreated, just like before
this patch.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Sometimes the preactivate hook of mlx5e_safe_switch_channels needs more
parameters than just struct mlx5e_priv *. For such cases, a new
parameter (void *context) is added to preactivate hooks.
Some of the existing normal functions are currently used as preactivate
callbacks. To avoid adding an extra unused parameter, they are wrapped
in an automatic way using the MLX5E_DEFINE_PREACTIVATE_WRAPPER_CTX
macro.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently mlx5e_switch_priv_channels expects that the preactivate hook
doesn't fail, however, it can fail, because it may set hardware
parameters. This commit addresses this issue and provides a way to
recover from failures of the preactivate hook: the old channels are not
closed until the point where nothing can fail anymore, so in case
preactivate fails, the driver can roll back the old channels and
activate them again.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The number of queues is now updated by mlx5e_update_netdev_queues in a
centralized way, when no channels are active. Remove an extra occurrence
of netif_set_real_num_tx_queues to prepare it for the next commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Currently, mlx5e notifies the kernel about the number of queues and sets
the default XPS cpumasks when channels are activated. This
implementation has several corner cases, in which the kernel may not be
updated on time, or XPS cpumasks may be reset when not directly touched
by the user.
This commit fixes these corner cases to match the following expected
behavior:
1. The number of queues always corresponds to the number of channels
configured.
2. XPS cpumasks are set to driver's defaults on netdev attach.
3. XPS cpumasks set by user are not reset, unless the number of channels
changes. If the number of channels changes, they are reset to driver's
defaults. (In general case, when the number of channels increases or
decreases, it's not possible to guess how to convert the current XPS
cpumasks to work with the new number of channels, so we let the user
reconfigure it if they change the number of channels.)
XPS cpumasks are no longer stored per channel. Only one temporary
cpumask is used. The old stored cpumasks didn't reflect the user's
changes and were not used after applying them.
A scratchpad area is added to struct mlx5e_priv. As cpumask_var_t
requires allocation, and the preactivate hook can't fail, we need to
preallocate the temporary cpumask in advance. It's stored in the
scratchpad.
Fixes: 149e566fef ("net/mlx5e: Expand XPS cpumask to cover all online cpus")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5e_ethtool_set_channels updates the indirection table before
switching to the new channels. If the switch fails, the indirection
table is new, but the channels are old, which is wrong. Fix it by using
the preactivate hook of mlx5e_safe_switch_channels to update the
indirection table at the stage when nothing can fail anymore.
As the code that updates the indirection table is now encapsulated into
a new function, use that function in the attach flow when the driver has
to reduce the number of channels, and prepare the code for the next
commit.
Fixes: 85082dba0a ("net/mlx5e: Correctly handle RSS indirection table when changing number of channels")
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
mlx5e_safe_switch_channels accepts a callback to be called before
activating new channels. It is intended to configure some hardware
parameters in cases where channels are recreated because some
configuration has changed.
Recently, this callback has started being used to update the driver's
internal MLX5E_STATE_XDP_OPEN flag, and the following patches also
intend to use this callback for software preparations. This patch
renames the hw_modify callback to preactivate, so that the name fits
better.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
As a preparation for one of the following commits, create a function to
encapsulate the code that notifies the kernel about the new amount of
RX and TX queues. The code will be called multiple times in the next
commit.
Signed-off-by: Maxim Mikityanskiy <maximmi@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
The LRO boolean state in params->lro_en must not be set in case
the NIC is not capable.
Enforce this check and remove the TODO comment.
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
We shall always extract channel index out of the txq, regardless
of the relation between txq_ix and num channels. The extraction is
always valid, as if txq is smaller than number of channels,
txq_ix == priv->txq2sq[txq_ix]->ch_ix.
By doing so, we can remove an if clause from the select queue method,
and have one flow for all packets.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Reviewed-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Since commit d8a953ddde ("bootconfig: Set CONFIG_BOOT_CONFIG=n by
default") also changed the CONFIG_BOOTTIME_TRACING to select
CONFIG_BOOT_CONFIG to show the boot-time tracing on the menu,
it introduced wrong dependencies with BLK_DEV_INITRD as below.
WARNING: unmet direct dependencies detected for BOOT_CONFIG
Depends on [n]: BLK_DEV_INITRD [=n]
Selected by [y]:
- BOOTTIME_TRACING [=y] && TRACING_SUPPORT [=y] && FTRACE [=y] && TRACING [=y]
This makes the CONFIG_BOOT_CONFIG selects CONFIG_BLK_DEV_INITRD to
fix this error and make CONFIG_BOOTTIME_TRACING=n by default, so
that both boot-time tracing and boot configuration off but those
appear on the menu list.
Link: http://lkml.kernel.org/r/158264140162.23842.11237423518607465535.stgit@devnote2
Fixes: d8a953ddde ("bootconfig: Set CONFIG_BOOT_CONFIG=n by default")
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Compiled-tested-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Implement support for transferring XDP meta data into skb for
virtio_net driver; before calling into the program, xdp.data_meta points
to xdp.data, where on program return with pass verdict, we call
into skb_metadata_set().
Tested with the script at
https://github.com/higebu/virtio_net-xdp-metadata-test.
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/bpf/20200225033212.437563-2-yuya.kusakabe@gmail.com
We do not want to care about the vnet header in receive_small() if XDP
is loaded, since we can not know whether or not the packet is modified
by XDP.
Fixes: f6b10209b9 ("virtio-net: switch to use build_skb() for small buffer")
Signed-off-by: Yuya Kusakabe <yuya.kusakabe@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jason Wang <jasowang@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Link: https://lore.kernel.org/bpf/20200225033212.437563-1-yuya.kusakabe@gmail.com
Due to various bugs in tests clean up code (usually), if host system is
misconfigured, it happens that test_progs will just crash in the middle of
running a test with little to no indication of where and why the crash
happened. For cases where coredump is not readily available (e.g., inside
a CI), it's very helpful to have a stack trace, which lead to crash, to be
printed out. This change adds a signal handler that will capture and print out
symbolized backtrace:
$ sudo ./test_progs -t mmap
test_mmap:PASS:skel_open_and_load 0 nsec
test_mmap:PASS:bss_mmap 0 nsec
test_mmap:PASS:data_mmap 0 nsec
Caught signal #11!
Stack trace:
./test_progs(crash_handler+0x18)[0x42a888]
/lib64/libpthread.so.0(+0xf5d0)[0x7f2aab5175d0]
./test_progs(test_mmap+0x3c0)[0x41f0a0]
./test_progs(main+0x160)[0x407d10]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7f2aab15d3d5]
./test_progs[0x407ebc]
[1] 1988412 segmentation fault (core dumped) sudo ./test_progs -t mmap
Unfortunately, glibc's symbolization support is unable to symbolize static
functions, only global ones will be present in stack trace. But it's still a
step forward without adding extra libraries to get a better symbolization.
Signed-off-by: Andrii Nakryiko <andriin@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20200225000847.3965188-1-andriin@fb.com
Provide read_word_data() callback for overvoltage and undervoltage
output readouts conversion. These registers are presented in
'slinear11' format, while default conversion for 'vout' class for the
devices is 'vid'. It is resulted in wrong conversion in pmbus_reg2data()
for in{3-4}_lcrit and in{3-4}_crit attributes.
)
Fixes: aaafb7c8eb ("hwmon: (pmbus) Add support for Infineon Multi-phase xdpe122 family controllers")
Signed-off-by: Vadim Pasternak <vadimp@mellanox.com>
Link: https://lore.kernel.org/r/20200224225202.19576-1-vadimp@mellanox.com
[gropeck: Adjusted to mainline PMBus API]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
We use ->task_pid for exit cancellation, but we need to ensure it's
cleared to zero for io_req_work_grab_env() to do the right thing. Take
a suggestion from Bart and clear the whole thing, just setting the
function passed in. This makes it more future proof as well.
Fixes: 36282881a7 ("io-wq: add io_wq_cancel_pid() to cancel based on a specific pid")
Signed-off-by: Jens Axboe <axboe@kernel.dk>
If the exception type isn't a translation fault, don't try to map and
instead go straight to a terminal fault.
Otherwise, we can get flooded by kernel warnings and further faults.
Fixes: 187d292920 ("drm/panfrost: Add support for GPU heap allocations")
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Acked-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200212202236.13095-1-robh@kernel.org
Jiri Pirko says:
====================
mlxsw: Implement ACL-dropped packets identification
mlxsw hardware allows to insert a ACL-drop action with a value defined
by user that would be later on passed with a dropped packet.
To implement this, use the existing TC action cookie and pass it to the
driver. As the cookie format coming down from TC and the mlxsw HW cookie
format is different, do the mapping of these two using idr and rhashtable.
The cookie is passed up from the HW through devlink_trap_report() to
drop_monitor code. A new metadata type is used for that.
Example:
$ tc qdisc add dev enp0s16np1 clsact
$ tc filter add dev enp0s16np1 ingress protocol ip pref 10 flower skip_sw dst_ip 192.168.1.2 action drop cookie 3b45fa38c8
^^^^^^^^^^
$ devlink trap set pci/0000:00:10.0 trap acl action trap
$ dropwatch
Initializing null lookup method
dropwatch> set hw true
setting hardware drops monitoring to 1
dropwatch> set alertmode packet
Setting alert mode
Alert mode successfully set
dropwatch> start
Enabling monitoring...
Kernel monitoring activated.
Issue Ctrl-C to stop monitoring
drop at: ingress_flow_action_drop (acl_drops)
origin: hardware
input port ifindex: 30
input port name: enp0s16np1
cookie: 3b45fa38c8 <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<
timestamp: Fri Jan 24 17:10:53 2020 715387671 nsec
protocol: 0x800
length: 98
original length: 98
This way the user may insert multiple drop rules and monitor the dropped
packets with the information of which action caused the drop.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend existing devlink trap test to include metadata type for flow
action cookie.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add new trap ACL which reports flow action cookie in a metadata. Allow
used to setup the cookie using debugfs file.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the cookie index received along with the packet to lookup original
flow_offload cookie binary and pass it down to devlink_trap_report().
Add "fa_cookie" metadata to the ACL trap.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In case the received packet comes in due to one of ACL discard traps,
take the user_def_val_orig_pkt_len field from CQE and store it
in skb->cb as ACL cookie index.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Track cookies coming down to driver by flow_offload.
Assign a cookie_index to each unique cookie binary. Use previously
defined "Trap with userdef" flex action to ask HW to pass cookie_index
alongside with the dropped packets.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Expose "Trap action with userdef". It is the same as already
defined "Trap action" with a difference that it would ask the policy
engine to pass arbitrary value (userdef) alongside with received packets.
This would be later on used to carry cookie index.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add cookie argument to devlink_trap_report() allowing driver to pass in
the user cookie. Pass on the cookie down to drop monitor code.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
If driver passed along the cookie, push it through Netlink.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow driver to indicate cookie metadata for registered traps.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Extend struct flow_action_entry in order to hold TC action cookie
specified by user inserting the action.
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Reviewed-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
The icmpv6_send function has long had a static inline implementation
with an empty body for CONFIG_IPV6=n, so that code calling it doesn't
need to be ifdef'd. The new icmpv6_ndo_send function, which is intended
for drivers as a drop-in replacement with an identical function
signature, should follow the same pattern. Without this patch, drivers
that used to work with CONFIG_IPV6=n now result in a linker error.
Cc: Chen Zhou <chenzhou10@huawei.com>
Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 0b41713b60 ("icmp: introduce helper for nat'd source address in network device context")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This tag contains a handful of RISC-V related fixes that I've collected and
would like to target for 5.6-rc4:
* A fix to set up the PMPs on boot, which allows the kernel to access memory on
systems that don't set up permissive PMPs before getting to Linux. This only
effects machine-mode kernels, which currently means only NOMMU kernels.
* A fix to avoid enabling supervisor-mode interrupts when running in
machine-mode, also only for NOMMU kernels.
* A pair of fixes to our KASAN support to avoid corrupting memory.
* A gitignore fix.
This boots on QEMU's virt board for me.
-----BEGIN PGP SIGNATURE-----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=r0RY
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull RISC-V fixes from Palmer Dabbelt:
"This contains a handful of RISC-V related fixes that I've collected
and would like to target for 5.6-rc4:
- A fix to set up the PMPs on boot, which allows the kernel to access
memory on systems that don't set up permissive PMPs before getting
to Linux. This only effects machine-mode kernels, which currently
means only NOMMU kernels.
- A fix to avoid enabling supervisor-mode interrupts when running in
machine-mode, also only for NOMMU kernels.
- A pair of fixes to our KASAN support to avoid corrupting memory.
- A gitignore fix.
This boots on QEMU's virt board for me"
* tag 'riscv-for-linux-5.6-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: adjust the indent
riscv: allocate a complete page size for each page table
riscv: Fix gitignore
RISC-V: Don't enable all interrupts in trap_init()
riscv: set pmp configuration if kernel is running in M-mode
Pull MIPS fixes from Paul Burton:
"Here are a few MIPS fixes, and a MAINTAINERS update to hand over MIPS
maintenance to Thomas Bogendoerfer - this will be my final pull
request as MIPS maintainer.
Thanks for your helpful comments, useful corrections & responsiveness
during the time I've fulfilled the role, and I'm sure I'll pop up
elsewhere in the tree somewhere down the line"
* 'mips-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MAINTAINERS: Hand MIPS over to Thomas
MIPS: ingenic: DTS: Fix watchdog nodes
MIPS: X1000: Fix clock of watchdog node.
MIPS: vdso: Wrap -mexplicit-relocs in cc-option
MIPS: VPE: Fix a double free and a memory leak in 'release_vpe()'
MIPS: cavium_octeon: Fix syncw generation.
mips: vdso: add build time check that no 'jalr t9' calls left
MIPS: Disable VDSO time functionality on microMIPS
mips: vdso: fix 'jalr t9' crash in vdso code
If the flag SB_FLAG_RECALCULATE is present in the superblock, but it was
not specified on the command line (i.e. ic->recalculate_flag is false),
dm-integrity would return invalid table line - the reported number of
arguments would not match the real number.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Reported-by: Ondrej Kozina <okozina@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we need to perform synchronous I/O in dm_integrity_map_continue(),
we must make sure that we are not in the map function - in order to
avoid the deadlock due to bio queuing in generic_make_request. To
avoid the deadlock, we offload the request to metadata_wq.
However, metadata_wq also processes metadata updates for write requests.
If there are too many requests that get offloaded to metadata_wq at the
beginning of dm_integrity_map_continue, the workqueue metadata_wq
becomes clogged and the system is incapable of processing any metadata
updates.
This causes a deadlock because all the requests that need to do metadata
updates wait for metadata_wq to proceed and metadata_wq waits inside
wait_and_add_new_range until some existing request releases its range
lock (which doesn't happen because the range lock is released after
metadata update).
In order to fix the deadlock, we create a new workqueue offload_wq and
offload requests to it - so that processing of offload_wq is independent
from processing of metadata_wq.
Fixes: 7eada909bf ("dm: add integrity target")
Cc: stable@vger.kernel.org # v4.12+
Reported-by: Heinz Mauelshagen <heinzm@redhat.com>
Tested-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Heinz Mauelshagen <heinzm@redhat.com>
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
If we resume a device in bitmap mode and the on-disk format is in journal
mode, we must recalculate anything above ic->sb->recalc_sector. Otherwise,
there would be non-recalculated blocks which would cause I/O errors.
Fixes: 468dfca38b ("dm integrity: add a bitmap mode")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
'list', 'll_list' and 'csd' are no longer used.
The 'list' is not used since it was introduced by commit f2298c0403
("null_blk: multi queue aware block test driver").
The 'll_list' is no longer used since commit 3c395a969a ("null_blk: set a
separate timer for each command").
The 'csd' is no longer used since commit ce2c350b2c ("null_blk: use
blk_complete_request and blk_mq_complete_request").
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Dongli Zhang <dongli.zhang@oracle.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Andres reports that buffered IO seems to suck up more cycles than we
would like, and he narrowed it down to the fact that the io-wq workers
will briefly spin for more work on completion of a work item. This was
a win on the networking side, but apparently some other cases take a
hit because of it. Remove the optimization to avoid burning more CPU
than we have to for disk IO.
Reported-by: Andres Freund <andres@anarazel.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
After making ext4 support iopoll method:
let ext4_file_operations's iopoll method be iomap_dio_iopoll(),
we found fio can easily hang in fio_ioring_getevents() with below fio
job:
rm -f testfile; sync;
sudo fio -name=fiotest -filename=testfile -iodepth=128 -thread
-rw=write -ioengine=io_uring -hipri=1 -sqthread_poll=1 -direct=1
-bs=4k -size=10G -numjobs=8 -runtime=2000 -group_reporting
with IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL enabled.
There are two issues that results in this hang, one reason is that
when IORING_SETUP_SQPOLL and IORING_SETUP_IOPOLL are enabled, fio
does not use io_uring_enter to get completed events, it relies on
kernel io_sq_thread to poll for completed events.
Another reason is that there is a race: when io_submit_sqes() in
io_sq_thread() submits a batch of sqes, variable 'inflight' will
record the number of submitted reqs, then io_sq_thread will poll for
reqs which have been added to poll_list. But note, if some previous
reqs have been punted to io worker, these reqs will won't be in
poll_list timely. io_sq_thread() will only poll for a part of previous
submitted reqs, and then find poll_list is empty, reset variable
'inflight' to be zero. If app just waits these deferred reqs and does
not wake up io_sq_thread again, then hang happens.
For app that entirely relies on io_sq_thread to poll completed requests,
let io_iopoll_req_issued() wake up io_sq_thread properly when adding new
element to poll_list, and when io_sq_thread prepares to sleep, check
whether poll_list is empty again, if not empty, continue to poll.
Signed-off-by: Xiaoguang Wang <xiaoguang.wang@linux.alibaba.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
KASAN is reporting that __blk_add_trace() has a use-after-free issue
when accessing q->blk_trace. Indeed the switching of block tracing (and
thus eventual freeing of q->blk_trace) is completely unsynchronized with
the currently running tracing and thus it can happen that the blk_trace
structure is being freed just while __blk_add_trace() works on it.
Protect accesses to q->blk_trace by RCU during tracing and make sure we
wait for the end of RCU grace period when shutting down tracing. Luckily
that is rare enough event that we can afford that. Note that postponing
the freeing of blk_trace to an RCU callback should better be avoided as
it could have unexpected user visible side-effects as debugfs files
would be still existing for a short while block tracing has been shut
down.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=205711
CC: stable@vger.kernel.org
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Reported-by: Tristan Madani <tristmd@gmail.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Before nftables commit fb9cea50e8b3 ("main: enforce options before
commands"), 'nft list ruleset -a' happened to work, but it's wrong
and won't work anymore. Replace it by 'nft -a list ruleset'.
Reported-by: Chen Yi <yiche@redhat.com>
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
