Enumerations should return a value between 0 and items-1, check that this
is the case.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-3-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To simplify the code a bit and allow future reuse factor the checks that
values we read are valid out of test_ctl_get_value() into a separate
function which can be reused later. As part of this extend the test to
check all the values for the control, not just the first one.
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211217130213.3893415-2-broonie@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The existing code maximizes confusion by using 'stream' and 'hstream'
variables of different types. Examples:
struct hdac_stream *stream;
struct hdac_ext_stream *stream;
struct hdac_stream *hstream;
struct hdac_ext_stream *hstream;
with some additional copy/paste remains:
struct hdac_ext_stream *azx_dev;
This patch suggests a consistent naming across all 'hdac_ext_stream'
functions. The convention is:
struct hdac_stream *hstream;
struct hdac_ext_stream *hext_stream;
No functionality change - just renaming of variables and more
consistent indentation.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-3-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
snd_hdac_ext_stop_streams() has really nothing to do with the
extension, it just loops over the bus streams.
Move it to the hdac_stream layer and rename to remove the 'ext'
prefix and add the precision that the chip will also be stopped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add a test of sigreturning to an unaligned address (low two bits set).
This should have no effect because the hardware will mask those bits.
However it previously falsely triggered a warning when
CONFIG_PPC_RFI_SRR_DEBUG=y.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-3-mpe@ellerman.id.au
When CONFIG_PPC_RFI_SRR_DEBUG=y we check the SRR values before returning
from interrupts. This is done in asm using EMIT_BUG_ENTRY, and passing
BUGFLAG_WARNING.
However that fails to create an exception table entry for the warning,
and so do_program_check() fails the exception table search and proceeds
to call _exception(), resulting in an oops like:
Oops: Exception in kernel mode, sig: 5 [#1]
LE PAGE_SIZE=64K MMU=Radix SMP NR_CPUS=2048 NUMA pSeries
Modules linked in:
CPU: 2 PID: 1204 Comm: sigreturn_unali Tainted: P 5.16.0-rc2-00194-g91ca3d4f77c5 #12
NIP: c00000000000c5b0 LR: 0000000000000000 CTR: 0000000000000000
...
NIP [c00000000000c5b0] system_call_common+0x150/0x268
LR [0000000000000000] 0x0
Call Trace:
[c00000000db73e10] [c00000000000c558] system_call_common+0xf8/0x268 (unreliable)
...
Instruction dump:
7cc803a6 888d0931 2c240000 4082001c 38800000 988d0931 e8810170 e8a10178
7c9a03a6 7cbb03a6 7d7a02a6 e9810170 <7f0b6088> 7d7b02a6 e9810178 7f0b6088
We should instead use EMIT_WARN_ENTRY, which creates an exception table
entry for the warning, allowing the warning to be correctly recognised,
and the code to resume after printing the warning.
Note however that because this warning is buried deep in the interrupt
return path, we are not able to recover from it (due to MSR_RI being
clear), so we still end up in die() with an unrecoverable exception.
Fixes: 59dc5bfca0 ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211221135101.2085547-2-mpe@ellerman.id.au
When CONFIG_PPC_RFI_SRR_DEBUG=y we check that NIP and SRR0 match when
returning from interrupts. This can trigger falsely if NIP has either of
its two low bits set via sigreturn or ptrace, while SRR0 has its low two
bits masked in hardware.
As a quick fix make sure to mask the low bits before doing the check.
Fixes: 59dc5bfca0 ("powerpc/64s: avoid reloading (H)SRR registers if they are still valid")
Reported-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Tested-by: Sachin Sant <sachinp@linux.vnet.ibm.com>
Link: https://lore.kernel.org/r/20211221135101.2085547-1-mpe@ellerman.id.au
The fixed_phy_get_gpiod function() returns NULL, it doesn't return error
pointers, using NULL checking to fix this.i
Fixes: 5468e82f70 ("net: phy: fixed-phy: Drop GPIO from fixed_phy_add()")
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Link: https://lore.kernel.org/r/20211224021500.10362-1-linmq006@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Various bug-fixes.
The following is an automated git shortlog grouped by driver:
amd-pmc:
- only use callbacks for suspend
apple-gmux:
- use resource_size() with res
intel_pmc_core:
- fix memleak on registration failure
platform/mellanox:
- mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
platform/x86/intel:
- Remove X86_PLATFORM_DRIVERS_INTEL
system76_acpi:
- Guard System76 EC specific functionality
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEEuvA7XScYQRpenhd+kuxHeUQDJ9wFAmHFrasUHGhkZWdvZWRl
QHJlZGhhdC5jb20ACgkQkuxHeUQDJ9xjFwf+JXu2sjXMSa8u789EVr1bba7ZcuSm
PHnEDLrCyOOMsvEMNQ2p0OQt0kVvMrRwMt5K1q7MKCUsLZVif9Sey6UoQ/jlOKNK
pfwaodIkB32XVBVW5Wl+moiscO1btsaJ4an8giZ1ksmKZ5+w15FccJO9GfQHnc6c
ugIUBXAdgGMoB9bIUuMoSOFtvPJa9i2d2ltEKYI7xsUsmizbBRfNkbij8F/pcHrk
NMzk6ea6neTv3J+xPtweofxpMe+L243JpWJfJfE+xUrAix1lmc955uVUwalscq2g
s6kRsK19vcgVoKjiNsnEDYEBnVJvh0+IFEFwntPw42p37kOVX9t/nON3sg==
=8LDR
-----END PGP SIGNATURE-----
Merge tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver fixes from Hans de Goede:
"Various bug-fixes"
* tag 'platform-drivers-x86-v5.16-4' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: intel_pmc_core: fix memleak on registration failure
platform/x86/intel: Remove X86_PLATFORM_DRIVERS_INTEL
platform/x86: system76_acpi: Guard System76 EC specific functionality
platform/x86: apple-gmux: use resource_size() with res
platform/x86: amd-pmc: only use callbacks for suspend
platform/mellanox: mlxbf-pmc: Fix an IS_ERR() vs NULL bug in mlxbf_pmc_map_counters
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
This series contains three topics.
1. SoundWire: Intel: remove pdm support
2. ASoC/SoundWire: dai: expand 'stream' concept beyond SoundWire
3. ASoC/SOF/SoundWire: fix suspend-resume on pause with dynamic pipelines
The topics are independent but the changes are dependent. So please
allow me to send them in one series.
The pointer lt is being assigned a value and then later
updated but that value is never read. The pointer is
redundant and can be removed.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The security of Machine Owner Key (MOK) relies on secure boot. When
secure boot is disabled, EFI firmware will not verify binary code. Then
arbitrary efi binary code can modify MOK when rebooting.
This patch prevents MOK/MOKx be loaded when secure boot be disabled.
Signed-off-by: "Lee, Chun-Yi" <jlee@suse.com>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Currently arch_ima_get_secureboot() and arch_get_ima_policy() are
defined only when CONFIG_IMA is set, and this makes any code calling
those functions without CONFIG_IMA fail.
Move the declaration and the dummy definition of those functions
outside ifdef-CONFIG_IMA block for fixing the undefined symbols.
Signed-off-by: Takashi Iwai <tiwai@suse.de>
[zohar@linux.ibm.com: removed in-tree/out-of-tree comment in patch description]
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Receiving the Over-Current Protection interrupt while the regulator is
disabled does not count as unhandled/failure (IRQ_NONE, or 0 as it were)
but a "fake event", usually due to inrush as the is regulator about to
be enabled.
Fixes: 390af53e04 ("regulator: qcom-labibb: Implement short-circuit and over-current IRQs")
Signed-off-by: Marijn Suijten <marijn.suijten@somainline.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Link: https://lore.kernel.org/r/20211224113450.107958-1-marijn.suijten@somainline.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Configure the speaker gpio pin based on power sequence of the DAPM
speaker events.
Enable speaker after widget power up and Disable before widget powerdown.
Signed-off-by: V sujith kumar Reddy <vsujithkumar.reddy@amd.com>
Link: https://lore.kernel.org/r/20211224150058.2444776-1-vsujithkumar.reddy@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
return value form directly instead of
taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cm>
Signed-off-by: chiminghao <chi.minghao@zte.com.cn>
Link: https://lore.kernel.org/r/20211209015707.409870-1-chi.minghao@zte.com.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Yes, you are right and now the return code depending on the
init_clks().
Fixes: 6078c65194 ("soc: mediatek: Refine scpsys to support multiple platform")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20211222015157.1025853-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Device nodes can be released after components have bound.
Shortens the lifecycle of the device nodes. Releases the reference
counts after snd_soc_register_card.
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20211224064719.2031210-5-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
While the hardware supports PDM streams, this capability has never
been tested or enabled on any product, so this is dead-code. Let's
remove all this.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-8-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
cppcheck warning:
drivers/soundwire/intel.c:1487:10: style: Variable 'ret' is assigned a
value that is never used. [unreadVariable]
int ret = 0;
^
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-7-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Overloading the tx_mask with a linear value is asking for trouble and
only works because the codec_dai hw_params() is called before the
cpu_dai hw_params().
Move to the more generic set_stream() API to pass the hdac_stream
information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:
/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
codec_dai->tx_mask);
As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.
We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.
Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.
Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This patch provides both a simplification of the suspend flows and a
better balanced operation during suspend/resume transition, as part of
the transition of Sound Open Firmware (SOF) to dynamic pipelines: the
DSP resources are only enabled when required instead of enabled on
startup.
The exiting code relies on a convoluted way of dealing with suspend
signals. Since there is no .suspend DAI callback, we used the
component .suspend and marked all the component DAI dmas as
'suspended'. The information was used in the .prepare stage to
differentiate resume operations from xrun handling, and only
reinitialize SHIM registers and DMA in the former case.
While this solution has been working reliably for about 2 years, there
is a much better solution consisting in trapping the TRIGGER_SUSPEND
in the .trigger DAI ops. The DMA is still marked in the same way for
the .prepare op to run, but in addition the callbacks sent to DSP
firmware are now balanced.
Normal operation:
hw_params -> intel_params_stream
hw_free -> intel_free_stream
suspend -> intel_free_stream
prepare -> intel_params_stream
This balanced operation was not required with existing SOF firmware
relying on static pipelines instantiated at every boot. With the
on-going transition to dynamic pipelines, it's however a requirement
to keep the use count for the DAI widget balanced across all
transitions.
The component suspend is not removed but instead modified to deal with
a corner case: when a substream is PAUSED, the ALSA core does not
throw the TRIGGER_SUSPEND. This is problematic since the refcount for
all pipelines and widgets is not balanced, leading to issues on
resume. The trigger callback keeps track of the 'paused' state with a
new flag, which is tested during the component suspend called later to
release the remaining DSP resources. These resources will be
re-enabled in the .prepare step.
The IPC used in the TRIGGER_SUSPEND to release DSP resources is not a
problem since the BE dailink is already marked as non-atomic.
Co-developed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-4-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We don't really need to pass a substream to the callback, we only need
the direction. No functionality change, only simplification to enable
improve suspend with paused streams.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-3-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
We have a helper, use it to simplify widget lookup
Suggested-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-2-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
This release adds following change:
- Update max performance when BIOS disabled turbo
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
When BIOS disables turbo, the cpuinfo_max_freq will also be same as the
power up base frequency. When SST-PP causes increase in base frequency
the performance will be still limited to the old base frequency as the
cpuinfo_max_freq will not be updated.
In this case we need to update scaling_max frequency to the new
base_frequency. This will result in setting updated max performance
limit in the Pstate driver. So performance will not be limited to the
old base frequency.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Add config_init for LAN8814. This function is required for the following
reasons:
- we need to make sure that the PHY is reset,
- disable ANEG with QSGMII PCS Host side
- swap the MDI-X A,B transmit so that there will not be any link flip-flaps
when the PHY gets a link.
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use the possessive "its" instead of the contraction of "it is" ("it's")
in user messages.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the new family 19h models 50h-5fh PCI IDs (device 18h functions 0
and 6) to support Ryzen 5000 APUs ("Cezanne").
Signed-off-by: Marc Bevand <m@zorinaq.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Yazen Ghannam <yazen.ghannam@amd.com>
Link: https://lore.kernel.org/r/20211221233112.556927-1-m@zorinaq.com
Commit 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well
as bcrl on s390") added a new alternative mnemonic for the existing brcl
instruction. This is required for the combination old gcc version (pre 9.0)
and binutils since version 2.37.
However at the same time this commit introduced a typo, replacing brcl with
bcrl. As a result no mcount locations are detected anymore with old gcc
versions (pre 9.0) and binutils before version 2.37.
Fix this by using the correct mnemonic again.
Reported-by: Miroslav Benes <mbenes@suse.cz>
Cc: Jerome Marchand <jmarchan@redhat.com>
Cc: <stable@vger.kernel.org>
Fixes: 85bf17b28f ("recordmcount.pl: look for jgnop instruction as well as bcrl on s390")
Link: https://lore.kernel.org/r/alpine.LSU.2.21.2112230949520.19849@pobox.suse.cz
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Finding the cable index and checking for changed status is also done
in extcon_set_state(). So calling extcon_set_state_sync() will do these
checks twice. Remove them and use these checks from extcon_set_state().
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
Do not use "/**" to begin a non-kernel-doc comment.
Fixes this build warning:
drivers/extcon/extcon-usb-gpio.c:23:
warning: expecting prototype for drivers/extcon/extcon-usb-gpio.c().
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Chanwoo Choi <cw00.choi@samsung.com>
It isn't correct to set set->nr_maps as 3 if g_poll_queues is > 0 since
we can change it via configfs for null_blk device created there, so only
set it as 3 if active poll_queues is > 0.
Fixes divide zero exception reported by Shinichiro.
Fixes: 2bfdbe8b7e ("null_blk: allow zero poll queues")
Reported-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Reviewed-by: Shin'ichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Link: https://lore.kernel.org/r/20211224010831.1521805-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Due to some SoCs have a bit shift issue that will drop a bit for usb3
phy or pcie phy, fix it by adding software efuse reading and setting,
but only support it optionally for version 2/3.
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218082802.5256-2-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Add optional property nvmem-cells and nvmem-cell-names to support
software efuse load, this helps to fix the efuse bit shift issue
on mt8195 etc.
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20211218082802.5256-1-chunfeng.yun@mediatek.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two different PCIe PHYs on SM8450, one having one lane (v5)
and another with two lanes (v5.20). This commit adds support for the
second PCIe phy.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211218141754.503661-3-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
There are two different PCIe PHYs on SM8450, one having one lane and
another with two lanes. Add support for second (gen4, two lanes) PHY.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20211218141754.503661-2-dmitry.baryshkov@linaro.org
Signed-off-by: Vinod Koul <vkoul@kernel.org>
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The max number of UDP gso segments is intended to cap to
UDP_MAX_SEGMENTS, this is checked in udp_send_skb().
skb->len contains network and transport header len here, we should use
only data len instead.
This is the ipv6 counterpart to the below referenced commit,
which missed the ipv6 change
Fixes: 158390e456 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-1-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
platform_get_resource(pdev, IORESOURCE_IRQ, ..) relies on static
allocation of IRQ resources in DT core code, this causes an issue
when using hierarchical interrupt domains using "interrupts" property
in the node as this bypasses the hierarchical setup and messes up the
irq chaining.
In preparation for removal of static setup of IRQ resource from DT core
code use platform_get_irq() so that interrupt mapping is created on demand.
While at it also store the IRQ number in struct cryp_device_data so that
we don't have to call platform_get_irq() frequently.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
