Instead of referencing the tegra_plane_funcs struct directly, use each
plane's vtable instead. This makes it more future-proof in case any of
the planes ever use a different set of functions.
Signed-off-by: Thierry Reding <treding@nvidia.com>
This cache is used to avoid mapping and unmapping buffer objects
unnecessarily. Mappings are cached per client and stay hot until
the buffer object is destroyed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
DMA-BUF requires that each device that accesses a DMA-BUF attaches to it
separately. To do so the host1x_bo_pin() and host1x_bo_unpin() functions
need to be reimplemented so that they can return a mapping, which either
represents an attachment or a map of the driver's own GEM object.
Signed-off-by: Thierry Reding <treding@nvidia.com>
* kvm-arm64/pkvm-hyp-sharing:
: .
: Series from Quentin Perret, implementing HYP page share/unshare:
:
: This series implements an unshare hypercall at EL2 in nVHE
: protected mode, and makes use of it to unmmap guest-specific
: data-structures from EL2 stage-1 during guest tear-down.
: Crucially, the implementation of the share and unshare
: routines use page refcounts in the host kernel to avoid
: accidentally unmapping data-structures that overlap a common
: page.
: [...]
: .
KVM: arm64: pkvm: Unshare guest structs during teardown
KVM: arm64: Expose unshare hypercall to the host
KVM: arm64: Implement do_unshare() helper for unsharing memory
KVM: arm64: Implement __pkvm_host_share_hyp() using do_share()
KVM: arm64: Implement do_share() helper for sharing memory
KVM: arm64: Introduce wrappers for host and hyp spin lock accessors
KVM: arm64: Extend pkvm_page_state enumeration to handle absent pages
KVM: arm64: pkvm: Refcount the pages shared with EL2
KVM: arm64: Introduce kvm_share_hyp()
KVM: arm64: Implement kvm_pgtable_hyp_unmap() at EL2
KVM: arm64: Hook up ->page_count() for hypervisor stage-1 page-table
KVM: arm64: Fixup hyp stage-1 refcount
KVM: arm64: Refcount hyp stage-1 pgtable pages
KVM: arm64: Provide {get,put}_page() stubs for early hyp allocator
Signed-off-by: Marc Zyngier <maz@kernel.org>
Currently driver supports legacy power domain API, this patch adds generic
power domain support. This allows us to utilize a modern GENPD API for
newer device-trees.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Peter Geis <pgwipeout@gmail.com> # Ouya T30
Tested-by: Paul Fertser <fercerpav@gmail.com> # PAZ00 T20
Tested-by: Nicolas Chauvet <kwizart@gmail.com> # PAZ00 T20 and TK1 T124
Tested-by: Matt Merhar <mattmerhar@protonmail.com> # Ouya T30
Acked-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SPI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now SPI driver must use OPP
API for driving the controller's clock rate because OPP API takes care
of reconfiguring the domain's performance state in accordance to the
rate. Add OPP support to the driver.
Acked-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The NAND on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now NAND must be resumed using
runtime PM API in order to initialize the NAND power state. Add runtime PM
and OPP support to the NAND driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Miquel Raynal <miquel.raynal@bootlin.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The SDHCI on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now SDHCI must be resumed using
runtime PM API in order to initialize the SDHCI power state. The SDHCI
clock rate must be changed using OPP API that will reconfigure the power
domain performance state in accordance to the rate. Add runtime PM and OPP
support to the SDHCI driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The PWM on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now PWM must be resumed using
runtime PM API in order to initialize the PWM power state. The PWM clock
rate must be changed using OPP API that will reconfigure the power domain
performance state in accordance to the rate. Add runtime PM and OPP
support to the PWM driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The GMI bus on Tegra belongs to the core power domain and we're going to
enable GENPD support for the core domain. Now GMI must be resumed using
runtime PM API in order to initialize the GMI power state. Add runtime PM
and OPP support to the GMI driver.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra USB controller belongs to the core power domain and we're going
to enable GENPD support for the core domain. Now USB controller must be
resumed using runtime PM API in order to initialize the USB power state.
We already support runtime PM for the CI device, but CI's PM is separated
from the RPM managed by tegra-usb driver. Add runtime PM and OPP support
to the driver.
Acked-by: Peter Chen <peter.chen@kernel.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
CORE power domain uses name of device-tree node, which is inconsistent with
the names of PMC domains. Set the name to "core" to make it consistent.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Only couple drivers need to get the -ENODEV error code and majority of
drivers need to explicitly initialize the performance state. Add new
common helper which sets up OPP table for these drivers.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Device-tree schema doesn't allow domain name to start with a number.
We don't use 3d domain yet in device-trees, so rename it to the name
used by Tegra TRMs: TD, TD2.
Reported-by: David Heidelberg <david@ixit.cz>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
GENPD core now can set up domain's performance state properly while device
is RPM-suspended. Runtime PM of a device must be enabled during setup
because GENPD checks whether device is suspended and check doesn't work
while RPM is disabled. Instead of replicating the boilerplate RPM-enable
code around OPP helper for each driver, let's make OPP helper to take care
of enabling it.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Depending on hardware version, Tegra SoC may require a higher voltages
during resume from system suspend, otherwise hardware will crash. Set
SoC voltages to a nominal levels during suspend.
Link: https://lore.kernel.org/all/a8280b5b-7347-8995-c97b-10b798cdf057@gmail.com/
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Use resource-managed helpers to make code cleaner and more correct,
properly releasing all resources in case of driver probe error.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The FUSE controller is enabled at a boot time. Reset it in order to put
hardware and clock into clean and disabled state.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
The Tegra PMC driver implements a restart handler that supports Tegra
specific reboot commands such as placing the device into 'recovery' mode
in order to reprogram the platform. This is accomplished by setting the
appropriate bit in the PMC scratch0 register prior to rebooting the
platform.
For Tegra platforms that support PSCI or EFI, the default Tegra restart
handler is not called and the PSCI or EFI restart handler is called
instead. Hence, for Tegra platforms that support PSCI or EFI, the Tegra
specific reboot commands do not currently work. Fix this by moving the
code that programs the PMC scratch0 register into a separate reboot
notifier that will always be called on reboot.
Signed-off-by: Jon Hunter <jonathanh@nvidia.com>
Reviewed-by: Dmitry Osipenko <digetx@gmail.com>
Tested-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Previously we assumed that devm_tegra_core_dev_init_opp_table() will
be used only by drivers that will always have device with OPP table,
but this is not true anymore. For example now Tegra30 will have OPP table
for PWM, but Tegra20 not and both use the same driver. Hence let's not
print the error message about missing OPP table in the common helper,
we can print it elsewhere.
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Make use of the newly introduced unshare hypercall during guest teardown
to unmap guest-related data structures from the hyp stage-1.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-15-qperret@google.com
Introduce an unshare hypercall which can be used to unmap memory from
the hypervisor stage-1 in nVHE protected mode. This will be useful to
update the EL2 ownership state of pages during guest teardown, and
avoids keeping dangling mappings to unreferenced portions of memory.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-14-qperret@google.com
Tearing down a previously shared memory region results in the borrower
losing access to the underlying pages and returning them to the "owned"
state in the owner.
Implement a do_unshare() helper, along the same lines as do_share(), to
provide this functionality for the host-to-hyp case.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-13-qperret@google.com
__pkvm_host_share_hyp() shares memory between the host and the
hypervisor so implement it as an invocation of the new do_share()
mechanism.
Note that double-sharing is no longer permitted (as this allows us to
reduce the number of page-table walks significantly), but is thankfully
no longer relied upon by the host.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-12-qperret@google.com
By default, protected KVM isolates memory pages so that they are
accessible only to their owner: be it the host kernel, the hypervisor
at EL2 or (in future) the guest. Establishing shared-memory regions
between these components therefore involves a transition for each page
so that the owner can share memory with a borrower under a certain set
of permissions.
Introduce a do_share() helper for safely sharing a memory region between
two components. Currently, only host-to-hyp sharing is implemented, but
the code is easily extended to handle other combinations and the
permission checks for each component are reusable.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-11-qperret@google.com
In preparation for adding additional locked sections for manipulating
page-tables at EL2, introduce some simple wrappers around the host and
hypervisor locks so that it's a bit easier to read and bit more difficult
to take the wrong lock (or even take them in the wrong order).
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-10-qperret@google.com
Explicitly name the combination of SW0 | SW1 as reserved in the pte and
introduce a new PKVM_NOPAGE meta-state which, although not directly
stored in the software bits of the pte, can be used to represent an
entry for which there is no underlying page. This is distinct from an
invalid pte, as stage-2 identity mappings for the host are created
lazily and so an invalid pte there is the same as a valid mapping for
the purposes of ownership information.
This state will be used for permission checking during page transitions
in later patches.
Reviewed-by: Andrew Walbran <qwandor@google.com>
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-9-qperret@google.com
In order to simplify the page tracking infrastructure at EL2 in nVHE
protected mode, move the responsibility of refcounting pages that are
shared multiple times on the host. In order to do so, let's create a
red-black tree tracking all the PFNs that have been shared, along with
a refcount.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-8-qperret@google.com
The create_hyp_mappings() function can currently be called at any point
in time. However, its behaviour in protected mode changes widely
depending on when it is being called. Prior to KVM init, it is used to
create the temporary page-table used to bring-up the hypervisor, and
later on it is transparently turned into a 'share' hypercall when the
kernel has lost control over the hypervisor stage-1. In order to prepare
the ground for also unsharing pages with the hypervisor during guest
teardown, introduce a kvm_share_hyp() function to make it clear in which
places a share hypercall should be expected, as we will soon need a
matching unshare hypercall in all those places.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-7-qperret@google.com
Implement kvm_pgtable_hyp_unmap() which can be used to remove hypervisor
stage-1 mappings at EL2.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-6-qperret@google.com
kvm_pgtable_hyp_unmap() relies on the ->page_count() function callback
being provided by the memory-management operations for the page-table.
Wire up this callback for the hypervisor stage-1 page-table.
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-5-qperret@google.com
In nVHE-protected mode, the hyp stage-1 page-table refcount is broken
due to the lack of refcount support in the early allocator. Fix-up the
refcount in the finalize walker, once the 'hyp_vmemmap' is up and running.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-4-qperret@google.com
To prepare the ground for allowing hyp stage-1 mappings to be removed at
run-time, update the KVM page-table code to maintain a correct refcount
using the ->{get,put}_page() function callbacks.
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-3-qperret@google.com
In nVHE protected mode, the EL2 code uses a temporary allocator during
boot while re-creating its stage-1 page-table. Unfortunately, the
hyp_vmmemap is not ready to use at this stage, so refcounting pages
is not possible. That is not currently a problem because hyp stage-1
mappings are never removed, which implies refcounting of page-table
pages is unnecessary.
In preparation for allowing hypervisor stage-1 mappings to be removed,
provide stub implementations for {get,put}_page() in the early allocator.
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Quentin Perret <qperret@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20211215161232.1480836-2-qperret@google.com
* kvm-arm64/vgic-fixes-5.17:
: .
: A few vgic fixes:
: - Harden vgic-v3 error handling paths against signed vs unsigned
: comparison that will happen once the xarray-based vcpus are in
: - Demote userspace-triggered console output to kvm_debug()
: .
KVM: arm64: vgic: Demote userspace-triggered console prints to kvm_debug()
KVM: arm64: vgic-v3: Fix vcpu index comparison
Signed-off-by: Marc Zyngier <maz@kernel.org>
The find.h APIs are designed to be used only on unsigned long arguments.
This can technically result in a over-read, but it is harmless in this
case. Regardless, fix it to avoid the warning seen under -Warray-bounds,
which we'd like to enable globally:
In file included from ./include/linux/bitmap.h:9,
from ./include/linux/cpumask.h:12,
from ./arch/x86/include/asm/cpumask.h:5,
from ./arch/x86/include/asm/msr.h:11,
from ./arch/x86/include/asm/processor.h:22,
from ./arch/x86/include/asm/cpufeature.h:5,
from ./arch/x86/include/asm/thread_info.h:53,
from ./include/linux/thread_info.h:60,
from ./arch/x86/include/asm/preempt.h:7,
from ./include/linux/preempt.h:78,
from ./include/linux/spinlock.h:55,
from ./include/linux/swait.h:7,
from ./include/linux/completion.h:12,
from drivers/iio/adc/stmpe-adc.c:10:
drivers/iio/adc/stmpe-adc.c: In function 'stmpe_adc_probe':
./include/linux/find.h:98:23: warning: array subscript 'long unsigned int[0]' is partly outside array bounds of 'u32[1]' {aka 'unsigned int[1]'} [-Warray-bounds]
98 | val = *addr | ~GENMASK(size - 1, offset);
| ^~~~~
drivers/iio/adc/stmpe-adc.c:258:13: note: while referencing 'norequest_mask'
258 | u32 norequest_mask = 0;
| ^~~~~~~~~~~~~~
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Since devm_ioremap_resource() function return error pointers.
The pktdma_get_regs() function does not return NULL, It return error
pointers too. Using IS_ERR() to check the return value to fix this.
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Link: https://lore.kernel.org/r/20211214015544.7270-1-linmq006@gmail.com
Return value from ads8688_prog_write() directly instead
of taking this in another redundant variable.
Reported-by: Zeal Robot <zealci@zte.com.cn>
Signed-off-by: Minghao Chi <chi.minghao@zte.com.cn>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The > needs to be >= to prevent accessing one element beyond the end of
the st->channel_configs[] array.
Fixes: fea251b6a5 ("iio: addac: add AD74413R driver")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cosmin Tanislav <cosmin.tanislav@analog.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
By flushing the output, iio_event_monitor can be more useful to programs
chained along with it.
iio_event_monitor stk3310 | awk '/rising/{system("my_unlockscreen.sh")} /falling/{system("my_lockscreen.sh")}'
Without this flush, the above example would buffer a number of events,
then after a while run the lock/unlock scripts several times.
Signed-off-by: Zach DeCook <zachdecook@librem.one>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Set the maximum register to 0xff so we can dump the registers for this
device in debugfs.
Fixes: a095f15c00 ("drm/bridge: add support for sn65dsi86 bridge driver")
Cc: Rob Clark <robdclark@chromium.org>
Cc: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20211215002529.382383-1-swboyd@chromium.org
If compiled with CONFIG_NET_NS_REFCNT_TRACKER=y,
using put_net_track() in iterate_cleanup_work()
and netns_tracker_alloc() in nf_nat_masq_schedule()
might help us finding netns refcount imbalances.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
If compiled with CONFIG_NET_NS_REFCNT_TRACKER=y,
using put_net_track() in nfulnl_instance_free_rcu()
and get_net_track() in instance_create()
might help us finding netns refcount imbalances.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Drvdata is typically used by drivers to attach driver specific data to a
device. It is used to retrieve driver specific information when only the
device to which the data is attached is available.
In the IIO core in the `iio_device_alloc()` function we call
`iio_device_set_drvdata(indio_dev, indio_dev)`. This sets the drvdata of
the IIO device to itself.
This is rather unnecessary since if we have a pointer to the IIO device to
call `iio_device_get_drvdata()` on it we don't need to call the function
since we already have the pointer. If we only have a pointer to the `struct
device` we can use `dev_to_iio_dev()` to get the IIO device from it.
Furthermore the drvdata is supposed to be reserved for drivers, so it
should not be used by the IIO core in the first place.
The `set_drvdata()` has been around from the very beginning of the IIO
framework and back then it was used in the IIO device sysfs attribute
handling code. But that was subsequently replaced with a `dev_to_iio_dev()`
in commit e53f5ac52e ("iio: Use dev_to_iio_dev()") and other cleanups.
The self `set_drvdata()` is now no longer needed and can be removed.
Verified that there no longer any users by checking for potential users
using the following two coccinelle scripts and reviewing that none of the
matches are problematic code.
<smpl>
@@
struct iio_dev *iio_dev;
expression dev;
identifier fn !~ "(remove|resume|suspend)";
@@
fn(...)
{
...
*iio_dev = dev_get_drvdata(dev)
...
}
</smpl>
<smpl>
@r1@
position p;
struct iio_dev *indio_dev;
identifier dev_fn =~ "^dev_";
identifier devm_fn =~ "^devm_";
@@
(
dev_fn
|
devm_fn
)
(&indio_dev@p->dev, ...)
@@
struct iio_dev *indio_dev;
position p != r1.p;
@@
*&indio_dev@p->dev</smpl>
Signed-off-by: Lars-Peter Clausen <lars@metafoo.de>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
I2C initialization is allowed to fail. In this case, create a connector
without DDC adapter. The current code would dereference a NULL pointer.
Reading the modes from the connector is supposed to work without I2C
adapter. Add the respective test.
v2:
* init edid to NULL to avoid uninitialized read (Dan)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20211206091125.29501-2-tzimmermann@suse.de
