With write back cache, we use orig_page to do prexor. This patch
makes sure we read data into orig_page for it.
Flag R5_OrigPageUPTDODATE is added to show whether orig_page
has the latest data from raid disk.
We introduce a helper function uptodate_for_rmw() to simplify
the a couple conditions in handle_stripe_dirtying().
Signed-off-by: Song Liu <songliubraving@fb.com>
Signed-off-by: Shaohua Li <shli@fb.com>
If the interrupt allocation failed we should start freeing the CQ rings
rather than unregistering the netdev notifier.
Fixes: 29c8d9eba5 ("IB: Add vmw_pvrdma driver")
Signed-off-by: Adit Ranadive <aditr@vmware.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For run-on-reset SMP configs, non master cores call a routine which
waits until Master gives it a "go" signal (currently using a shared
mem flag). The same routine then jumps off the well known entry point of
all non Master cores i.e. @first_lines_of_secondary
This patch moves out the last part into one single place in early boot
code.
This is better in terms of absraction (the wait API only waits) and
returns, leaving out the "jump off to" part.
In actual implementation this requires some restructuring of the early
boot code as well as Master now jumps to BSS setup explicitly,
vs. falling thru into it before.
Technically this patch doesn't cause any functional change, it just
moves the ugly #ifdef'ry from assembly code to "C"
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
commit 3c7c7a2fc8 ("ARC: Don't use "+l" inline asm constraint")
modified the inline assembly to setup LP_COUNT register manually and NOT
rely on gcc to do it (with the +l inline assembler contraint hint, now
being retired in the compiler)
However the fix was flawed as we didn't add LP_COUNT to asm clobber list,
meaning gcc doesn't know that LP_COUNT or zero-delay-loops are in action
in the inline asm.
This resulted in some fun - as nested ZOL loops were being generared
| mov lp_count,250000 ;16 # tmp235,
| lp .L__GCC__LP14 # <======= OUTER LOOP (gcc generated)
| .L14:
| ld r2, [r5] # MEM[(volatile u32 *)prephitmp_43], w
| dmb 1
| breq r2, -1, @.L21 #, w,,
| bbit0 r2,1,@.L13 # w,,
| ld r4,[r7] ;25 # loops_per_jiffy, loops_per_jiffy
| mpymu r3,r4,r6 #, loops_per_jiffy, tmp234
|
| mov lp_count, r3 # <====== INNER LOOP (from inline asm)
| lp 1f
| nop
| 1:
| nop_s
| .L__GCC__LP14: ; loop end, start is @.L14 #,
This caused issues with drivers relying on sane behaviour of udelay
friends.
With LP_COUNT added to clobber list, gcc doesn't generate the outer
loop in say above case.
Addresses STAR 9001146134
Reported-by: Joao Pinto <jpinto@synopsys.com>
Fixes: 3c7c7a2fc8 ("ARC: Don't use "+l" inline asm constraint")
Cc: stable@vger.kernel.org
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
mlxsw_sp_nexthop_group_mac_update() is called in one of two cases:
1) When the MAC of a nexthop needs to be updated
2) When the size of a nexthop group has changed
In the second case the adjacency entries for the nexthop group need to
be reallocated from the adjacency table. In this case we must write to
the entries the MAC addresses of all the nexthops that should be
offloaded and not only those whose MAC changed. Otherwise, these entries
would be filled with garbage data, resulting in packet loss.
Fixes: a7ff87acd9 ("mlxsw: spectrum_router: Implement next-hop routing")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Runtime suspend shouldn't be executed if the tx queue is not empty,
because the device is not idle.
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
The old description basically read like "ethernet-phy-idAAAA.BBBB" can
be specified when you know the actual PHY ID. However, specifying this
has a side-effect: it forces Linux to bind to a certain PHY driver (the
one that matches the ID given in the compatible string), ignoring the ID
which is reported by the actual PHY.
Whenever a device is shipped with (multiple) different PHYs during it's
production lifetime then explicitly specifying
"ethernet-phy-idAAAA.BBBB" could break certain revisions of that device.
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 6480af4915 ("power_supply: wm97xx_battery: use
power_supply_get_drvdata") made wm97xx platform data mandatory, although
it's still optional.
This patch fixes an oops during driver probe on one of my MIPS boards with
a wm9712.
Signed-off-by: Manuel Lauss <manuel.lauss@gmail.com>
Reviewed-by: Robert Jarzmik <robert.jarzmik@free.fr>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Ignore value of interrupt distribution mode for common interrupts in
IDU since setting of affinity using value from Device Tree is deprecated
in ARC. Originally it is done in idu_irq_xlate() function and it is
semantically wrong and does not guaranty that an affinity value will be
set properly. idu_irq_enable() function is better place for
initialization of common interrupts.
By default send all common interrupts to all available online CPUs.
The affinity of common interrupts in IDU must be set manually since
in some cases the kernel will not call irq_set_affinity() by itself:
1. When the kernel is not configured with support of SMP.
2. When the kernel is configured with support of SMP but upper
interrupt controllers does not support setting of the affinity
and cannot propagate it to IDU.
Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
-----BEGIN PGP SIGNATURE-----
iQEcBAABAgAGBQJYhRv9AAoJEHm+PkMAQRiG/uAH+wYT9qwvT460pUC6F1X5PNdN
H5KvaGsRNP1SjjQid5CrAFFDs52pFKf9GoV0Rn2WRoHAmEF1Dps4y/bMtR1GlsRB
IfOU+bnmH1Mmj4RCXUoFgFgYJVXC0WOz9SM5aCOAAZLCRF9BdkTpRo8lijuh141k
7YMqpaRhr/rJvQRZMEX+Q8HhfyNHz53olrykYp+O4x5F/CUihFzH76pY28j0YihS
wd/DdxrWyFn35DcFGfDb3yK7J2a6pGtnFw3RP4gU8DsH/Ks0133cR/2lOAtGDECN
dAGbLHoTvj3L4Twz5aiH6WRkXUkfDLK9UhxD/82UgLLmP5XvG1RdKZUNQ60CL5g=
=2TBu
-----END PGP SIGNATURE-----
Merge tag 'v4.10-rc5' into for-linus
Sync up with mainline to apply fixup to a commit that came through
power supply tree.
Some nfsv4.0 servers may return a mode for the verifier following an open
with EXCLUSIVE4 createmode, but this does not mean the client should skip
setting the mode in the following SETATTR. It should only do that for
EXCLUSIVE4_1 or UNGAURDED createmode.
Fixes: 5334c5bdac ("NFS: Send attributes in OPEN request for NFS4_CREATE_EXCLUSIVE4_1")
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.3+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Xuan Qi reports that the Linux NFSv4 client failed to lock a file
that was migrated. The steps he observed on the wire:
1. The client sent a LOCK request to the source server
2. The source server replied NFS4ERR_MOVED
3. The client switched to the destination server
4. The client sent the same LOCK request to the destination
server with a bumped lock sequence ID
5. The destination server rejected the LOCK request with
NFS4ERR_BAD_SEQID
RFC 3530 section 8.1.5 provides a list of NFS errors which do not
bump a lock sequence ID.
However, RFC 3530 is now obsoleted by RFC 7530. In RFC 7530 section
9.1.7, this list has been updated by the addition of NFS4ERR_MOVED.
Reported-by: Xuan Qi <xuan.qi@oracle.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Cc: stable@vger.kernel.org # v3.7+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
For devices that can register page list that is bigger than
USHRT_MAX, we actually take the wrong value for sg_tablesize.
E.g: for CX4 max_fast_reg_page_list_len is 65536 (bigger than USHRT_MAX)
so we set sg_tablesize to 0 by mistake. Therefore, each IO that is
bigger than 4k splitted to "< 4k" chunks that cause performance degredation.
Remove wrong sg_tablesize assignment, and use the value that was set during
address resolution handler with the needed casting.
Cc: <stable@vger.kernel.org> # v4.5+
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Doug Ledford <dledford@redhat.com>
For last few months Darren and I are co-maintaining PDx86 subsystem.
Make this fact official by updating MAINTAINERS database.
Acked-by: Darren Hart <dvhart@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
After setting indirect_sg_entries module_param to huge value (e.g 500,000),
srp_alloc_req_data() fails to allocate indirect descriptors for the request
ring (kmalloc fails). This commit enforces the maximum value of
indirect_sg_entries to be SG_MAX_SEGMENTS as signified in module param
description.
Fixes: 65e8617fba (scsi: rename SCSI_MAX_{SG, SG_CHAIN}_SEGMENTS)
Fixes: c07d424d61 (IB/srp: add support for indirect tables that don't fit in SRP_CMD)
Cc: stable@vger.kernel.org # 4.7+
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Laurence Oberman <loberman@redhat.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>--
Signed-off-by: Doug Ledford <dledford@redhat.com>
If the device support arbitrary sg list mapping (device cap
IB_DEVICE_SG_GAPS_REG set) we allocate the memory regions with
IB_MR_TYPE_SG_GAPS.
Fixes: 509c5f33f4 ("IB/srp: Prevent mapping failures")
Cc: <stable@vger.kernel.org> # 4.7+
Signed-off-by: Israel Rukshin <israelr@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Mark Bloch <markb@mellanox.com>
Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Doug Ledford <dledford@redhat.com>
-----BEGIN PGP SIGNATURE-----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=3xla
-----END PGP SIGNATURE-----
Merge tag 'mac80211-for-davem-2017-01-24' of git://git.kernel.org/pub/scm/linux/kernel/git/jberg/mac80211
Johannes Berg says:
====================
A single fix, for a sleeping context problem found by LTP.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
In my previous patch, I missed that rate_control_rate_init() is
called from some places that cannot sleep, so it cannot call
ieee80211_recalc_min_chandef(). Remove that call for now to fix
the context bug, we'll have to find a different way to fix the
minimum channel width issue.
Fixes: 96aa2e7cf1 ("mac80211: calculate min channel width correctly")
Reported-by: Xiaolong Ye (via lkp-robot) <xiaolong.ye@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
The last pgtable rework silently disabled the CMMA unused state by
setting a local pte variable (a parameter) instead of propagating it
back into the caller. Fix it.
Fixes: ebde765c0e ("s390/mm: uninline ptep_xxx functions from pgtable.h")
Cc: stable@vger.kernel.org # v4.6+
Cc: Martin Schwidefsky <schwidefsky@de.ibm.com>
Cc: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
We can't dereference the dio structure after submitting the last bio for
this request, as I/O completion might have happened before the code is
run. Introduce a local is_sync variable instead.
Fixes: 542ff7bf ("block: new direct I/O implementation")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Matias Bjørling <m@bjorling.me>
Tested-by: Matias Bjørling <m@bjorling.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Commit 7f107887d1 ("ARM: dts: imx: Remove skeleton.dtsi") causes boot
issues when the bootloader does not create a 'chosen' node if such node
is not present in the dtb.
The reason for the boot failure is well explained by Javier Martinez
Canillas: "the decompressor relies on a pre-existing chosen node to be
available to insert the command line and merge other ATAGS info."
, so pass an empty 'chosen' node to fix the boot problem.
This issue has been seen in the kernelci reports with Barebox as
bootloader.
Also pass the 'memory' node in order to fix boot issues on the SolidRun
iMX6 platforms.
Fixes: 7f107887d1 ("ARM: dts: imx: Remove skeleton.dtsi")
Reported-by: kernelci.org bot <bot@kernelci.org>
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
* Avoid a crash when the firmware is restarted in certain scenarios with DQA
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEF3LNfgb2BPWm68smoUecoho8xfoFAliGadAACgkQoUecoho8
xfqdUw/+M6/NLR+Sx6E2rWQtBiRQVJAuVKgU4+VSY8uZssN8QznZha8E0fzO/JYQ
KLYZuqm1VLbYigRRzVR1MkmR8V7M/4HgOnDjw3WZkA6fMFS8VEZZ5K65CF5ZgWuR
RHjE/LKiW0HhrQJwTU7Mc7OAVUJ4K5TH3k3efStKWV30flIhn+gzBn6rjJkir9EV
gevbJCNeDh2i7IlkOuDnB1Bn0QKsmByBLlHsfUl6omB6gRsJjFir/ZQEHfz9MgCo
xi1gAcwfQyRQqXEPkNADmfLCISDqzcu7JwAAgh34fcUcJ4CzW1kNXD+WZvtbYnho
wP7X/a0ihpsUFVIxIbvcvkMeE5riSlnWKZktPME5uGySbewuA/27JZQQOEoE4dMX
BuZ5VgHDxfKPyqBao2pS3lVRhhv3zSCQoPKS2So8dHCT7QQV0+HhS2RvtY8gcZIb
jxeYs0pm9nHGOMuTMkcFbzbBk27JUTDzN2OokxEYebrYqBEL3JoCL48JIMqpxNvR
QzsWZQW3KqDZ4Swaizb3Ocb6O79TjrByrpNdmQT1cfhrHI7APIz/7Nue+ARQAZ1y
C86LDrKEUCL/6WaJPID43XtRV5BKdKyo0D2jaPn2Zw+AeoOANc2UVHmprcnsvV/E
Cj9UZ6nQgRQytdpcxSZbkmjkTdxqMU5uvnlLykpo4Yl6IS1dMU8=
=IVoD
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-for-kalle-2017-01-23' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-fixes
* Remove an extra hyphen from a string that was preventing the firmware to load
* Avoid a crash when the firmware is restarted in certain scenarios with DQA
Unfortunately the stack protector support we merged recently only works
on some toolchains. If the toolchain is built without glibc support
everything works fine, but if glibc is built then it leads to a panic
at boot.
The solution is not rc5 material, so revert the support for now. This
reverts commits:
6533b7c16e ("powerpc: Initial stack protector (-fstack-protector) support")
902e06eb86 ("powerpc/32: Change the stack protector canary value per task")
Fixes: 6533b7c16e ("powerpc: Initial stack protector (-fstack-protector) support")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
In __eeh_clear_pe_frozen_state(), we should pass the flag's value
instead of its address to eeh_unfreeze_pe(). The isolated flag is
cleared if no error returned from __eeh_clear_pe_frozen_state(). We
never observed the error from the function. So the isolated flag should
have been always cleared, no real issue is caused because of the misused
@flag.
This fixes the code by passing the value of @flag to eeh_unfreeze_pe().
Fixes: 5cfb20b96f ("powerpc/eeh: Emulate EEH recovery for VFIO devices")
Cc: stable@vger.kernel.org # v3.18+
Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
The prototypes were moved to a new header, but the function definitions
were not updated to pull in the declarations.
drivers/gpu/drm/drm_cache.c:79:1: warning: no previous prototype for ‘drm_clflush_pages’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:120:1: warning: no previous prototype for ‘drm_clflush_sg’ [-Wmissing-prototypes]
drivers/gpu/drm/drm_cache.c:152:1: warning: no previous prototype for ‘drm_clflush_virt_range’ [-Wmissing-prototypes]
Fixes: f9a87bd7d5 ("drm: Move drm_clflush prototypes to drm_cache header file")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170121181944.24672-1-chris@chris-wilson.co.uk
The compacted-format XSAVES area is determined at boot time and
never changed after. The field xsave.header.xcomp_bv indicates
which components are in the fixed XSAVES format.
In fpstate_init() we did not set xcomp_bv to reflect the XSAVES
format since at the time there is no valid data.
However, after we do copy_init_fpstate_to_fpregs() in fpu__clear(),
as in commit:
b22cbe404a x86/fpu: Fix invalid FPU ptrace state after execve()
and when __fpu_restore_sig() does fpu__restore() for a COMPAT-mode
app, a #GP occurs. This can be easily triggered by doing valgrind on
a COMPAT-mode "Hello World," as reported by Joakim Tjernlund and
others:
https://bugzilla.kernel.org/show_bug.cgi?id=190061
Fix it by setting xcomp_bv correctly.
This patch also moves the xcomp_bv initialization to the proper
place, which was in copyin_to_xsaves() as of:
4c833368f0 x86/fpu: Set the xcomp_bv when we fake up a XSAVES area
which fixed the bug too, but it's more efficient and cleaner to
initialize things once per boot, not for every signal handling
operation.
Reported-by: Kevin Hao <haokexin@gmail.com>
Reported-by: Joakim Tjernlund <Joakim.Tjernlund@infinera.com>
Signed-off-by: Yu-cheng Yu <yu-cheng.yu@intel.com>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: Fenghua Yu <fenghua.yu@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi V. Shankar <ravi.v.shankar@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: haokexin@gmail.com
Link: http://lkml.kernel.org/r/1485212084-4418-1-git-send-email-yu-cheng.yu@intel.com
[ Combined it with 4c833368f0. ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Ensure that if userspace supplies insufficient data to
PTRACE_SETREGSET to fill all the registers, the thread's old
registers are preserved.
convert_vx_to_fp() is adapted to handle only a specified number of
registers rather than unconditionally handling all of them: other
callers of this function are adapted appropriately.
Based on an initial patch by Dave Martin.
Cc: stable@vger.kernel.org
Reported-by: Dave Martin <Dave.Martin@arm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
The of_node member in struct drm_bridge is hidden when CONFIG_OF
is disabled, causing a build error:
drivers/gpu/drm/bridge/dw-hdmi.c: In function '__dw_hdmi_probe':
drivers/gpu/drm/bridge/dw-hdmi.c:2063:14: error: 'struct drm_bridge' has no member named 'of_node'
We could fix this either using a Kconfig dependency on CONFIG_OF
or making the one line conditional. The latter gives us better
compile test coverage, so this is what I'm doing here.
Fixes: 69497eb923 ("drm: bridge: dw-hdmi: Implement DRM bridge registration")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/20170123122312.3290934-1-arnd@arndb.de
prom_init.c calls 'instance-to-package' twice, but the return
is not checked during prom_find_boot_cpu(). The result is then
passed to prom_getprop(), which could be PROM_ERROR. Add a return check
to prevent this.
This was found on a pasemi system, where CFE doesn't have a working
'instance-to package' prom call.
Before Commit 5c0484e25e ('powerpc: Endian safe trampoline') the area
around addr 0 was mostly 0's and this doesn't cause a problem. Once the
macro 'FIXUP_ENDIAN' has been added to head_64.S, the low memory area
now has non-zero values, which cause the prom_getprop() call
to hang.
mpe: Also confirmed that under SLOF if 'instance-to-package' did fail
with PROM_ERROR we would crash in SLOF. So the bug is not specific to
CFE, it's just that other open firmwares don't trigger it because they
have a working 'instance-to-package'.
Fixes: 5c0484e25e ("powerpc: Endian safe trampoline")
Cc: stable@vger.kernel.org # v3.13+
Signed-off-by: Darren Stevens <darren@stevens-zone.net>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
We cannot call nfs4_handle_exception() without first ensuring that the
slot has been freed. If not, we end up deadlocking with the process
waiting for recovery to complete, and recovery waiting for the slot
table to drain.
Fixes: 2e80dbe7ac ("NFSv4.1: Close callback races for OPEN, LAYOUTGET...")
Cc: stable@vger.kernel.org # v4.8+
Signed-off-by: Trond Myklebust <trond.myklebust@primarydata.com>
Currently, if the user add a stateful object with the name size exceed
NFT_OBJ_MAXNAMELEN - 1 (i.e. 31), we truncate it down to 31 silently.
This is not friendly, furthermore, this will cause duplicated stateful
objects when the first 31 characters of the name is same. So limit the
stateful object's name size to NFT_OBJ_MAXNAMELEN - 1.
After apply this patch, error message will be printed out like this:
# name_32=$(printf "%0.sQ" {1..32})
# nft add counter filter $name_32
<cmdline>:1:1-52: Error: Could not process rule: Numerical result out
of range
add counter filter QQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQQ
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Also this patch cleans up the codes which missing the name size limit
validation in nftables.
Fixes: e50092404c ("netfilter: nf_tables: add stateful objects")
Signed-off-by: Liping Zhang <zlpnobody@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Pull tile bugfix from Chris Metcalf:
"This avoids an issue with short userspace reads for regset via ptrace"
* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
tile/ptrace: Preserve previous registers for short regset write
Virtual display doesn't allocate amdgpu_encoder when initializing,
so will get invaild pointer if try to free amdgpu_encoder when
unloading driver.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Return success when the ring is properly initialized, otherwise return
failure.
Tonga SRIOV VF doesn't have UVD and VCE engines, the initialization of
these IPs is bypassed. The system crashes if application submit IB to
their rings which are not ready to use. It could be a common issue if
IP having ring buffer is disabled for some reason on specific ASIC, so
it should check the ring being ready to use.
Bug: amdgpu_test crashes system on Tonga VF.
Signed-off-by: Ding Pixel <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
- Fix a lockdep issue: the threaded irqchips also need their unique
key, and take this opportunity to get rid of the horrible macro and
replace it with a static inline.
-----BEGIN PGP SIGNATURE-----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=x1bG
-----END PGP SIGNATURE-----
Merge tag 'gpio-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"A single lockdep fix, nothing else going on. This makes lockdep
noiseless and work properly with threaded GPIO IRQchips.
Summary:
Fix a lockdep issue: the threaded irqchips also need their unique key,
and take this opportunity to get rid of the horrible macro and replace
it with a static inline"
* tag 'gpio-v4.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: provide lockdep keys for nested/unnested irqchips
-----BEGIN PGP SIGNATURE-----
iQIcBAABAgAGBQJYhUA5AAoJEAx081l5xIa+E9wP/j/2v9+L/bG+G7pNMnIuyEcy
5SB/ipC12Ek7j9cKtlyIBIXpAqXnDoKMd/a6AamC7a/w0gmluVHe1eoB4i326wRQ
fNDjD57it/N9QGHyyhHlRzOhwncP9tBHpfaHQPmZE68blusrb9JXgmbVbVRubSjB
fvwhK7aA6oWb2XhecWJ5UwVyYYB/E+Ca0hs//+6PRYI2MlHz4u1OOXD4jkkiFMdz
UcAAEqMOPNbHPYM3FsVs2Xo171AgFaeykoX4jt8+Kbyl91YYj0uyZ0BQA76midVz
U8d/UEE8c+4lg4wqyDjL0c5HhtaIekluuUa2yxi8t/1T4j58wDXxyjhlgJn4toN8
M10LBaCUsCj7Y3iZiYPc8QkMSY6GO1ITkhByw7LKILG1L/RfiVnixkzVtqyO02oA
b7R6HLS5ma63WiYf6HgxlgDlgwiDwU3lnvZcttJfOAPUN0SZsXUHG6i7vs6XX8eL
Y4wm+SB0605yRWd2bZ8FUWVvpifCYjCMH7vwFUNbwuSb4ZvsCmSyjNTSTGAbObQH
v7i+rIegaQ0PV9ribZ0HsIBnOzjO7Vr0O46ZpgWSU9G/QuYmMuOGHvnhfo7HfbaI
KRqRmlLULosp7DeM4Z8MFrNeNj+0OXaPacdfqPS86uCiU/wShyZUyCzJKeD6HTid
xVpiX27zOzt2zvQE/OzL
=H6SW
-----END PGP SIGNATURE-----
Merge tag 'drm-fixes-for-v4.10-rc6' of git://people.freedesktop.org/~airlied/linux
Pull drm fixes from Dave Airlie:
"drm fixes across the board.
Okay holidays and LCA kinda caught up with me, I thought I'd get some
of this dequeued last week, but Hobart was sunny and warm and not all
gloomy and rainy as usual.
This is a bit large, but not too much considering it's two weeks stuff
from AMD and Intel.
core:
- one locking fix that helps with dynamic suspend/resume races
i915:
- mostly GVT updates, GVT was a recent introduction so fixes for it
shouldn't cause any notable side effects.
amdgpu:
- a bunch of fixes for GPUs with a different memory controller design
that need different firmware.
exynos:
- decon regression fixes
msm:
- two regression fixes
etnaviv:
- a workaround for an mmu bug that needs a lot more work.
virtio:
- sparse fix, and a maintainers update"
* tag 'drm-fixes-for-v4.10-rc6' of git://people.freedesktop.org/~airlied/linux: (56 commits)
drm/exynos/decon5433: set STANDALONE_UPDATE_F on output enablement
drm/exynos/decon5433: fix CMU programming
drm/exynos/decon5433: do not disable video after reset
drm/i915: Ignore bogus plane coordinates on SKL when the plane is not visible
drm/i915: Remove WaDisableLSQCROPERFforOCL KBL workaround.
drm/amdgpu: add support for new hainan variants
drm/radeon: add support for new hainan variants
drm/amdgpu: change clock gating mode for uvd_v4.
drm/amdgpu: fix program vce instance logic error.
drm/amdgpu: fix bug set incorrect value to vce register
Revert "drm/amdgpu: Only update the CUR_SIZE register when necessary"
drm/msm: fix potential null ptr issue in non-iommu case
drm/msm/mdp5: rip out plane->pending tracking
drm/exynos/decon5433: set STANDALONE_UPDATE_F also if planes are disabled
drm/exynos/decon5433: update shadow registers iff there are active windows
drm/i915/gvt: rewrite gt reset handler using new function intel_gvt_reset_vgpu_locked
drm/i915/gvt: fix vGPU instance reuse issues by vGPU reset function
drm/i915/gvt: introduce intel_vgpu_reset_mmio() to reset mmio space
drm/i915/gvt: move mmio init/clean function to mmio.c
drm/i915/gvt: introduce intel_vgpu_reset_cfg_space to reset configuration space
...
We need to check the return value of phy_connect_direct() in
dsa_slave_phy_connect() otherwise we may be continuing the
initialization of a slave network device with a PHY that already
attached somewhere else and which will soon be in error because the PHY
device is in error.
The conditions for such an error to occur are that we have a port of our
switch that is not disabled, and has the same port number as a PHY
address (say both 5) that can be probed using the DSA slave MII bus. We
end-up having this slave network device find a PHY at the same address
as our port number, and we try to attach to it.
A slave network (e.g: port 0) has already attached to our PHY device,
and we try to re-attach it with a different network device, but since we
ignore the error we would end-up initializating incorrect device
references by the time the slave network interface is opened.
The code has been (re)organized several times, making it hard to provide
an exact Fixes tag, this is a bugfix nonetheless.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
phy_error() is called in the PHY state machine workqueue context, and
calls phy_trigger_machine() which does a cancel_delayed_work_sync() of
the workqueue we execute from, causing a deadlock situation.
Augment phy_trigger_machine() machine with a sync boolean indicating
whether we should use cancel_*_sync() or just cancel_*_work().
Fixes: 3c293f4e08 ("net: phy: Trigger state machine on state change and not polling.")
Reported-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Due to the way how xfs_iomap_write_allocate tries to convert the whole
found extents from delalloc to real space we can run into a race
condition with multiple threads doing writes to this same extent.
For the non-COW case that is harmless as the only thing that can happen
is that we call xfs_bmapi_write on an extent that has already been
converted to a real allocation. For COW writes where we move the extent
from the COW to the data fork after I/O completion the race is, however,
not quite as harmless. In the worst case we are now calling
xfs_bmapi_write on a region that contains hole in the COW work, which
will trip up an assert in debug builds or lead to file system corruption
in non-debug builds. This seems to be reproducible with workloads of
small O_DSYNC write, although so far I've not managed to come up with
a with an isolated reproducer.
The fix for the issue is relatively simple: tell xfs_bmapi_write
that we are only asked to convert delayed allocations and skip holes
in that case.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Brian Foster <bfoster@redhat.com>
Reviewed-by: Darrick J. Wong <darrick.wong@oracle.com>
Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com>
