Each active policy has a cpd (blkcg_policy_data) on each blkcg. The
cpd's were allocated by blkcg core and each policy could request to
allocate extra space at the end by setting blkcg_policy->cpd_size
larger than the size of cpd.
This is a bit unusual but blkg (blkcg_gq) policy data used to be
handled this way too so it made sense to be consistent; however, blkg
policy data switched to alloc/free callbacks.
This patch makes similar changes to cpd handling.
blkcg_policy->cpd_alloc/free_fn() are added to replace ->cpd_size. As
cpd allocation is now done from policy side, it can simply allocate a
larger area which embeds cpd at the beginning.
As ->cpd_alloc_fn() may be able to perform all necessary
initializations, this patch makes ->cpd_init_fn() optional.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
* Rename blkcg->pd[] to blkcg->cpd[] so that cpd is consistently used
for blkcg_policy_data.
* Make blkcg_policy->cpd_init_fn() take blkcg_policy_data instead of
blkcg. This makes it consistent with blkg_policy_data methods and
to-be-added cpd alloc/free methods.
* blkcg_policy_data->blkcg and cpd_to_blkcg() added so that
cpd_init_fn() can determine the associated blkcg from
blkcg_policy_data.
v2: blkcg_policy_data->blkcg initializations were missing. Added.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The newly added ->pd_alloc_fn() and ->pd_free_fn() deal with pd
(blkg_policy_data) while the older ones use blkg (blkcg_gq). As using
blkg doesn't make sense for ->pd_alloc_fn() and after allocation pd
can always be mapped to blkg and given that these are policy-specific
methods, it makes sense to converge on pd.
This patch makes all methods deal with pd instead of blkg. Most
conversions are trivial. In blk-cgroup.c, a couple method invocation
sites now test whether pd exists instead of policy state for
consistency. This shouldn't cause any behavioral differences.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
With the recent addition of alloc and free methods, things became
messier. This patch reorganizes them according to the followings.
* ->pd_alloc_fn()
Responsible for allocation and static initializations - the ones
which can be done independent of where the pd might be attached.
* ->pd_init_fn()
Initializations which require the knowledge of where the pd is
attached.
* ->pd_free_fn()
The counter part of pd_alloc_fn(). Static de-init and freeing.
This leaves ->pd_exit_fn() without any users. Removed.
While at it, collapse an one liner function throtl_pd_exit(), which
has only one user, into its user.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Because percpu allocator couldn't do non-blocking allocations,
blk-throttle was forced to implement an ad-hoc asynchronous allocation
mechanism for its percpu stats for cases where blkg's (blkcg_gq's) are
allocated from an IO path without sleepable context.
Now that percpu allocator can handle gfp_mask and blkg_policy_data
alloc / free are handled by policy methods, the ad-hoc asynchronous
allocation mechanism can be replaced with direct allocation from
tg_stats_alloc_fn(). Rit it out.
This ensures that an active throtl_grp always has valid non-NULL
->stats_cpu. Remove checks on it.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
A blkg (blkcg_gq) represents the relationship between a cgroup and
request_queue. Each active policy has a pd (blkg_policy_data) on each
blkg. The pd's were allocated by blkcg core and each policy could
request to allocate extra space at the end by setting
blkcg_policy->pd_size larger than the size of pd.
This is a bit unusual but was done this way mostly to simplify error
handling and all the existing use cases could be handled this way;
however, this is becoming too restrictive now that percpu memory can
be allocated without blocking.
This introduces two new mandatory blkcg_policy methods - pd_alloc_fn()
and pd_free_fn() - which are used to allocate and release pd for a
given policy. As pd allocation is now done from policy side, it can
simply allocate a larger area which embeds pd at the beginning. This
change makes ->pd_size pointless. Removed.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkg_create() allows NULL ->pd_init_fn() but blkcg_activate_policy()
doesn't. As both in-kernel policies implement ->pd_init_fn, it
currently doesn't break anything. Update blkcg_activate_policy() so
that its behavior is consistent with blkg_create().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When a policy gets activated, it needs to allocate and install its
policy data on all existing blkg's (blkcg_gq's). Because blkg
iteration is protected by a spinlock, it currently counts the total
number of blkg's in the system, allocates the matching number of
policy data on a list and installs them during a single iteration.
This can be simplified by using speculative GFP_NOWAIT allocations
while iterating and falling back to a preallocated policy data on
failure. If the preallocated one has already been consumed, it
releases the lock, preallocate with GFP_KERNEL and then restarts the
iteration. This can be a bit more expensive than before but policy
activation is a very cold path and shouldn't matter.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkcg_css_alloc() bypasses policy data allocation and blkcg_css_free()
bypasses policy data and blkcg freeing for blkcg_root. There's no
reason to to treat policy data any differently for blkcg_root. If the
root css gets allocated after policies are registered, policy
registration path will add policy data; otherwise, the alloc path
will. The free path isn't never invoked for root csses.
This patch removes the unnecessary special handling of blkcg_root from
css_alloc/free paths.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
When blkcg_init_queue() fails midway after creating a new blkg, it
performs kfree() directly; however, this doesn't free the policy data
areas. Make it use blkg_free() instead. In turn, blkg_free() is
updated to handle root request_list special case.
While this fixes a possible memory leak, it's on an unlikely failure
path of an already cold path and the size leaked per occurrence is
miniscule too. I don't think it needs to be tagged for -stable.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Since ec13b1d6f0 ("blkcg: always create the blkcg_gq for the root
blkcg"), a request_list always has its blkg associated. Drop
unnecessary rl->blkg NULL test from blk_put_rl().
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Up until now, all async IOs were queued to async queues which are
shared across the whole request_queue, which means that blkcg resource
control is completely void on async IOs including all writeback IOs.
It was done this way because writeback didn't support writeback and
there was no way of telling which writeback IO belonged to which
cgroup; however, writeback recently became cgroup aware and writeback
bio's are sent down properly tagged with the blkcg's to charge them
against.
This patch makes async cfq_queues per-cfq_cgroup instead of
per-cfq_data so that each async IO is charged to the blkcg that it was
tagged for instead of unconditionally attributing it to root.
* cfq_data->async_cfqq and ->async_idle_cfqq are moved to cfq_group
and alloc / destroy paths are updated accordingly.
* cfq_link_cfqq_cfqg() no longer overrides @cfqg to root for async
queues.
* check_blkcg_changed() now also invalidates async queues as they no
longer stay the same across cgroups.
After this patch, cfq's proportional IO control through blkio.weight
works correctly when cgroup writeback is in use.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
cfq_find_alloc_queue() checks whether a queue actually needs to be
allocated, which is unnecessary as its sole caller, cfq_get_queue(),
only calls it if so. Also, the oom queue fallback logic is scattered
between cfq_get_queue() and cfq_find_alloc_queue(). There really
isn't much going on in the latter and things can be made simpler by
folding it into cfq_get_queue().
This patch collapses cfq_find_alloc_queue() into cfq_get_queue(). The
change is fairly straight-forward with one exception - async_cfqq is
now initialized to NULL and the "!is_sync" test in the last if
conditional is replaced with "async_cfqq" test. This is because gcc
(5.1.1) gets confused for some reason and warns that async_cfqq may be
used uninitialized otherwise. Oh well, the code isn't necessarily
worse this way.
This patch doesn't cause any functional difference.
v2: Updated to reflect GFP_ATOMIC -> GPF_NOWAIT.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
This is necessary for making async cfq_cgroups per-cfq_group instead
of per-cfq_data. While this change makes cfq_get_queue() perform RCU
locking and look up cfq_group even when it reuses async queue, the
extra overhead is extremely unlikely to be noticeable given that this
is already sitting behind cic->cfqq[] cache and the overall cost of
cfq operation.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Even when allocations fail, cfq_find_alloc_queue() always returns a
valid cfq_queue by falling back to the oom cfq_queue. As such, there
isn't much point in taking @gfp_mask and trying "harder" if __GFP_WAIT
is set. GFP_NOWAIT allocations don't fail often and even when they do
the degraded behavior is acceptable and temporary.
After all, the only reason get_request(), which ultimately determines
the gfp_mask, cares about __GFP_WAIT is to guarantee request
allocation, assuming IO forward progress, for callers which are
willing to wait. There's no reason for cfq_find_alloc_queue() to
behave differently on __GFP_WAIT when it already has a fallback
mechanism.
Remove @gfp_mask from cfq_find_alloc_queue() and propagate the changes
to its callers. This simplifies the function quite a bit and will
help making async queues per-cfq_group.
v2: Updated to reflect GFP_ATOMIC -> GPF_NOWAIT.
Signed-off-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
blkcg performs several allocations to track IOs per cgroup and enforce
resource control. Most of these allocations are performed lazily on
demand in the IO path and thus can't involve reclaim path. Currently,
these allocations use GFP_ATOMIC; however, blkcg can gracefully deal
with occassional failures of these allocations by punting IOs to the
root cgroup and there's no reason to reach into the emergency reserve.
This patch replaces GFP_ATOMIC with GFP_NOWAIT for the following
allocations.
* bdi_writeback_congested and blkcg_gq allocations in blkg_create().
* radix tree node allocations for blkcg->blkg_tree.
* cfq_queue allocation on ioprio changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-and-Reviewed-by: Jeff Moyer <jmoyer@redhat.com>
Suggested-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
* Some were accessing cic->cfqq[] directly. Always use cic_to_cfqq()
and cic_set_cfqq().
* check_ioprio_changed() doesn't need to verify cfq_get_queue()'s
return for NULL. It's always non-NULL. Simplify accordingly.
This patch doesn't cause any functional changes.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
If the cfq_queue cached in cfq_io_cq is the oom one, cfq_set_request()
replaces it by invoking cfq_get_queue() again without putting the oom
queue leaking the reference it was holding. While oom queues are not
released through reference counting, they're still reference counted
and this can theoretically lead to the reference count overflowing and
incorrectly invoke the usual release path on it.
Fix it by making cfq_set_request() put the ref it was holding.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Async cfqq's (cfq_queue's) are shared across cfq_data. When
cfq_get_queue() obtains a new queue from cfq_find_alloc_queue(), it
stashes the pointer in cfq_data and reuses it from then on; however,
the function doesn't consider that cfq_find_alloc_queue() may return
the oom_cfqq under memory pressure and installs the returned queue
unconditionally.
If the oom_cfqq is installed as an async cfqq, cfq_set_request() will
continue calling cfq_get_queue() hoping to replace it with a proper
queue; however, cfq_get_queue() will keep returning the cached queue
for the slot - the oom_cfqq.
Fix it by skipping caching if the queue is the oom one.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
cfq_get_queue()'s control flow looks like the following.
async_cfqq = NULL;
cfqq = NULL;
if (!is_sync) {
...
async_cfqq = ...;
cfqq = *async_cfqq;
}
if (!cfqq)
cfqq = ...;
if (!is_sync && !(*async_cfqq))
...;
The only thing the local variable init, the second if, and the
async_cfqq test in the third if achieves is to skip cfqq creation and
installation if *async_cfqq was already non-NULL. This is needlessly
complicated with different tests examining the same condition.
Simplify it to the following.
if (!is_sync) {
...
async_cfqq = ...;
cfqq = *async_cfqq;
if (cfqq)
goto out;
}
cfqq = ...;
if (!is_sync)
...;
out:
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Jeff Moyer <jmoyer@redhat.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Cc: Arianna Avanzini <avanzini.arianna@gmail.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
The following tracepoints are updated to report the cgroup used during
cgroup writeback.
* writeback_write_inode[_start]
* writeback_queue
* writeback_exec
* writeback_start
* writeback_written
* writeback_wait
* writeback_nowork
* writeback_wake_background
* wbc_writepage
* writeback_queue_io
* bdi_dirty_ratelimit
* balance_dirty_pages
* writeback_sb_inodes_requeue
* writeback_single_inode[_start]
Note that writeback_bdi_register is separated out from writeback_class
as reporting cgroup doesn't make sense to it. Tracepoints which take
bdi are updated to take bdi_writeback instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Add a function to determine the path length of a kernfs node. This
for now will be used by writeback tracepoint updates.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
wb_writeback_work->single_wait/done are used for the wait mechanism
for synchronous wb_work (wb_writeback_work) items which are issued
when bdi_split_work_to_wbs() fails to allocate memory for asynchronous
wb_work items; however, there's no reason to use a separate wait
mechanism for this. bdi_split_work_to_wbs() can simply use on-stack
fallback wb_work item and separate wb_completion to wait for it.
This patch removes wb_work->single_wait/done and the related code and
make bdi_split_work_to_wbs() use on-stack fallback wb_work and
wb_completion instead.
Signed-off-by: Tejun Heo <tj@kernel.org>
Suggested-by: Jan Kara <jack@suse.cz>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
wb's (bdi_writeback's) are currently keyed by memcg ID; however, in an
earlier implementation, wb's were keyed by blkcg ID.
bdi_for_each_wb() walks bdi->cgwb_tree in the ascending ID order and
allows iterations to start from an arbitrary ID which is used to
interrupt and resume iterations.
Unfortunately, while changing wb to be keyed by memcg ID instead of
blkcg, bdi_for_each_wb() was missed and is still assuming that wb's
are keyed by blkcg ID. This doesn't affect iterations which don't get
interrupted but bdi_split_work_to_wbs() makes use of iteration
resuming on allocation failures and thus may incorrectly skip or
repeat wb's.
Fix it by changing bdi_for_each_wb() to take memcg IDs instead of
blkcg IDs and updating bdi_split_work_to_wbs() accordingly.
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@fb.com>
The key_put() function tests whether its argument is NULL and then
returns immediately. Thus the test around this call might not be needed.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Consider eCryptfs dcache entries to be stale when the corresponding
lower inode's i_nlink count is zero. This solves a problem caused by the
lower inode being directly modified, without going through the eCryptfs
mount, leaving stale eCryptfs dentries cached and the eCryptfs inode's
i_nlink count not being cleared.
Signed-off-by: Tyler Hicks <tyhicks@canonical.com>
Reported-by: Richard Weinberger <richard@nod.at>
Cc: stable@vger.kernel.org
It was reported that after 10-20 reboots, a usb keyboard plugged
into a docking station would not work unless it was replugged in.
Using usbmon, it turns out the interrupt URBs were streaming with
callback errors of -71 for some reason. The hid-core.c::hid_io_error was
supposed to retry and then reset, but the reset wasn't really happening.
The check for HID_NO_BANDWIDTH was inverted. Fix was simple.
Tested by reporter and locally by me by unplugging a keyboard halfway until I
could recreate a stream of errors but no disconnect.
Signed-off-by: Don Zickus <dzickus@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Without this, the multi_v7_defconfig kernel cannot boot all CPUs
nor do deep cpuidle power saving on a TC2 board.
Signed-off-by: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Olof Johansson <olof@lixom.net>
drivers/net/built-in.o: In function `.vnic_wq_devcmd2_alloc':
(.text+0x49fe40): multiple definition of `.vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.text+0xb4318): first defined here
drivers/net/built-in.o:(.opd+0x2af00): multiple definition of `vnic_wq_devcmd2_alloc'
drivers/scsi/built-in.o:(.opd+0xad70): first defined here
drivers/net/built-in.o: In function `.vnic_wq_init_start':
(.text+0x49f9c0): multiple definition of `.vnic_wq_init_start'
drivers/scsi/built-in.o:(.text+0xb3b58): first defined here
drivers/net/built-in.o:(.opd+0x2ae88): multiple definition of `vnic_wq_init_start'
drivers/scsi/built-in.o:(.opd+0xace0): first defined here
Rename these to 'enic_*' to avoid the conflict with the functiosn of
the same name in the snic scsi driver.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
Latest FW submission added some vxlan offload capabilities to our device.
This patch adds the ability to connect to the vxlan NDOs and configure
the UDP port associated with it in the HW.
The device would now be capable of performing RSS according to the
inner headers of the vxlan packets.
Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com>
Signed-off-by: Yuval Mintz <Yuval.Mintz@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the user selected the precise_timestamps or histogram options, report
it in the @stats_list message output.
If the user didn't select these options, no extra tokens are reported,
thus it is backward compatible with old software that doesn't know about
precise timestamps and histogram.
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
Cc: stable@vger.kernel.org # 4.2
Andrew Lunn says:
====================
D in DSA patches
The D in DSA is distributed, meaning multiple switches can be
connected together. Currently no mainline system does this, and so the
code is broken. This patchset contains two fixes, and a small helper.
With three of more switches, the current device tree binding is not
sufficient to express the routing between the switches. The first
patch extends the binding, in a backwards compatible way, to allow a
link between a switch to describe all the switches accessible over the
link, not just the direct neighbor.
The third patch fixes the port configuration on newer devices for
links connecting switches.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Older devices only support a single DSA frame format, where as newer
devices have two. Take this into account when configuring a DSA port.
The port needs to be in plain old DSA mode, since this is a DSA link,
where as the newer format can be used for the CPU port.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add an inline helper for determining is a port is a DSA port.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
With more than two switches in a hierarchy, it becomes necessary to
describe multi-hop routes between switches. The current binding does
not allow this, although the older platform_data did. Extend the link
property to be a list rather than a single phandle to a remote switch.
It is then possible to express that a port should be used to reach
more than one switch and the switch maybe more than one hop away.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Simplify port-specific macros by eliminating explicit comparison
with 0. More importantly, enclose formal parameter in parens to
eliminate the risk of an operator precedence surprise.
Signed-off-by: Mark Rustad <mark.d.rustad@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Recent changes to igb_probe_vfs() could lead to the PF holding onto all
of the queues. Reorder igb_probe_vfs() to be before
gb_init_queue_configuration() and add some more error checking.
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In error handling code of igb_probe, the memory adapter->shadow_vfta
allocated by kcalloc in igb_sw_init is not freed. So when register_netdev
or igb_init_i2c is failed, a memory leak will occur.
This patch adds kfree to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When e1000e_setup_rx_resources is failed in e1000_open,
e1000e_free_tx_resources in "err_setup_rx" segment is executed.
"writel(0, tx_ring->head)" statement in e1000_clean_tx_ring
in e1000e_free_tx_resources will cause a null poonter dereference(crash),
because "tx_ring->head" is only assigned in e1000_configure_tx
in e1000_configure, but it is after e1000e_setup_rx_resources.
This patch moves head/tail register writing to e1000_configure_tx/rx,
which can fix this problem. It is inspired by igb_configure_tx_ring
in the igb driver.
Specially, thank Alexander Duyck for his valuable suggestion.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When igb_init_interrupt_scheme in igb_sriov_reinit is failed, the lock
acquired by rtnl_lock() is not released, which causes a deadlock.
This patch adds rtnl_unlock() in error handling to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When pci_dma_mapping_error in e100_xmit_prepare is failed, the skb buffer
allocated by netdev_alloc_skb_ip_align in e100_rx_alloc_skb is not
released, which causes a possible resource leak.
This patch adds error handling code to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
The driver lacks the check of nic->cbs_pool after pci_pool_create
in e100_probe. When this function is failed, a null pointer dereference
occurs when pci_pool_alloc uses nic->cbs_pool in e100_alloc_cbs.
This patch adds a check and related error handling code to fix it.
Signed-off-by: Jia-Ju Bai <baijiaju1990@163.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
When the .remove() callback for a PF is called, SR-IOV support for the
device is disabled, which requires unbinding and removing the VFs.
The VFs may be in-use either by the host kernel or userspace, such as
assigned to a VM through vfio-pci. In this latter case, the VFs may
be removed either by shutting down the VM or hot-unplugging the
devices from the VM. Unfortunately in the case of a Windows 2012 R2
guest, hot-unplug is broken due to the ordering of the PF driver
teardown. Disabling SR-IOV prior to unregister_netdev() avoids this
issue.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Acked-by: Mitch Williams <mitch.a.williams@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
This patch adds support for Marvell PHY 1512 (required for I354).
Submitted by: Maciej Szwed <maciej.szwed@intel.com>
Signed-off-by: Todd Fujinaka <todd.fujinaka@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
In addition to interrupt driven target time output events, the i210
also has two programmable clock outputs. These clocks support periods
between 16 nanoseconds and 140 milliseconds. This patch implements
the periodic output function using the clock outputs when possible,
falling back to the target time for longer periods.
Signed-off-by: Richard Cochran <richardcochran@gmail.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
During driver probing the following code path is triggered.
igb_probe
->igb_sw_init
->igb_probe_vfs
->igb_pci_enable_sriov
->igb_sriov_reinit
Doing the SR-IOV re-init is not necessary during probing since we're
starting from scratch. Here we can call igb_enable_sriov() right away.
Running igb_sriov_reinit() during igb_probe() also seems to cause
occasional packet loss on some onboard 82576 NICs. Reproduced on
Dell and HP servers with onboard 82576 NICs.
Example:
Intel Corporation 82576 Gigabit Network Connection [8086:10c9] (rev 01)
Subsystem: Dell Device [1028:0481]
Signed-off-by: Stefan Assmann <sassmann@kpanic.de>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
