Its all about caching min/max freq requested by userspace, and
the name 'cpufreq_real_policy' doesn't fit that well. Rename it to
cpufreq_user_policy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Its always same as policy->policy, and there is no need to keep another
copy of it. Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Its always same as policy->governor, and there is no need to keep
another copy of it. Remove it.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
'user_policy' caches properties of a policy that are set by userspace.
And these must be updated only if cpufreq core was successful in
updating them based on request from user space.
In store_scaling_governor(), we are updating user_policy.policy and
user_policy.governor even if cpufreq_set_policy() failed. That's
incorrect.
Fix this by updating user_policy.* only if we were successful in
updating the properties.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
cpufreq_get_policy() is useful if the pointer to policy isn't available
in advance. But if it is available, then there is no need to call
cpufreq_get_policy(). Directly use memcpy() to copy the policy.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
What's being done from CPUFREQ_INCOMPATIBLE, can also be done with
CPUFREQ_ADJUST. There is nothing special with CPUFREQ_INCOMPATIBLE
notifier.
Kill CPUFREQ_INCOMPATIBLE and fix its usage sites.
This also updates the numbering of notifier events to remove holes.
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Mediatek MT8173 is an ARMv8 based quad-core (2*Cortex-A53 and
2*Cortex-A72) SoC with duall clusters. For each cluster, two voltage
inputs, Vproc and Vsram are supplied by two regulators. For the big
cluster, two regulators come from different PMICs. In this case, when
scaling voltage inputs of the cluster, the voltages of two regulator
inputs need to be controlled by software explicitly under the SoC
specific limitation:
100mV < Vsram - Vproc < 200mV
which is called 'voltage tracking' mechanism. And when scaling the
frequency of cluster clock input, the input MUX need to be parented to
another "intermediate" stable PLL first and reparented to the original
PLL once the original PLL is stable at the target frequency. This patch
implements those mechanisms to enable CPU DVFS support for Mediatek
MT8173 SoC.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
This patch adds the clock and regulator consumer properties part of
document for CPU DVFS clocks on Mediatek MT8173 SoC.
Signed-off-by: Pi-Cheng Chen <pi-cheng.chen@linaro.org>
Acked-by: Michael Turquette <mturquette@baylibre.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Frank has agreed to step up and help with DT core code maintainership.
At the same time, Grant is taking a step back from active maintainership
responsibilities. Add Frank to the device tree core code entry and
shuffle Grant to the end of the list. In a few releases time Grant will
be removed entirely.
Signed-off-by: Grant Likely <grant.likely@linaro.org>
Signed-off-by: Rob Herring <robh@kernel.org>
The PXA architecture provides a DMA to pump data from the nand
controller to memory and the other way around. Add it to the binding
description.
Signed-off-by: Robert Jarzmik <robert.jarzmik@free.fr>
Signed-off-by: Rob Herring <robh@kernel.org>
CPSW driver has multiple compatibles for errata implementations but not
documented, add necessary documentation.
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Both free_io_migration() and issue_discard() dereference a migration
that was just freed. Fix those by saving off the migrations's cache
object before freeing the migration. Also cleanup needless mg->cache
dereferences now that the cache object is available directly.
Fixes: e44b6a5a3c ("dm cache: move wake_waker() from free_migrations() to where it is needed")
Signed-off-by: Joe Thornber <ejt@redhat.com>
Signed-off-by: Mike Snitzer <snitzer@redhat.com>
This patch introduces the use of managed resource function
devm_clk_get instead of clk_get and removes corresponding calls
to clk_put in the probe and remove functions.
To be compatible with the change various gotos are replaced with
direct returns, and unneeded label failed_put_clk is dropped.
Signed-off-by: Vaishali Thakkar <vthakkar1994@gmail.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Propagate error code on failure. Also changed %ld to %d in dev_err to use
ret variable rather than putting two calls to PTR_ERR.
A simplified version of the semantic match that finds the first problem is as
follows: (http://coccinelle.lip6.fr/)
// <smpl>
@@
identifier ret; expression e1,e2;
@@
(
if (\(ret < 0\|ret != 0\))
{ ... return ret; }
|
ret = 0
)
... when != ret = e1
when != &ret
*if(...)
{
... when != ret = e2
when forall
return ret;
}
// </smpl>
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
The limit should be "PAGE_SIZE - len" instead of PAGE_SIZE. Also let's
use scnprintf() because snprintf() returns the number of bytes which
would have been printed if there were space and scnprintf() returns the
number of bytes actually printed.
I don't think we are ever going to actually hit this limit in real life.
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Commit 0838aa7fcf ("netfilter: fix netns dependencies with conntrack
templates") migrated templates to the new allocator api, but forgot to
update error paths for them in CT and synproxy to use nf_ct_tmpl_free()
instead of nf_conntrack_free().
Due to that, memory is being freed into the wrong kmemcache, but also
we drop the per net reference count of ct objects causing an imbalance.
In Brad's case, this leads to a wrap-around of net->ct.count and thus
lets __nf_conntrack_alloc() refuse to create a new ct object:
[ 10.340913] xt_addrtype: ipv6 does not support BROADCAST matching
[ 10.810168] nf_conntrack: table full, dropping packet
[ 11.917416] r8169 0000:07:00.0 eth0: link up
[ 11.917438] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 12.815902] nf_conntrack: table full, dropping packet
[ 15.688561] nf_conntrack: table full, dropping packet
[ 15.689365] nf_conntrack: table full, dropping packet
[ 15.690169] nf_conntrack: table full, dropping packet
[ 15.690967] nf_conntrack: table full, dropping packet
[...]
With slab debugging, it also reports the wrong kmemcache (kmalloc-512 vs.
nf_conntrack_ffffffff81ce75c0) and reports poison overwrites, etc. Thus,
to fix the problem, export and use nf_ct_tmpl_free() instead.
Fixes: 0838aa7fcf ("netfilter: fix netns dependencies with conntrack templates")
Reported-by: Brad Jackson <bjackson0971@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The DP MST encoder config function never sets ddi_pll_sel, even though
its value is programmed in its ->pre_enable() hook. That used to work
because a new pipe_config was kzalloc'ed at every modeset, and the value
of zero selects the highest clock for the PLL. Starting with the commit
below, the value of ddi_pll_sel is preserved through modesets, and since
the correct value wasn't properly setup by the MST code, it could lead
to warnings and blank screens.
commit 8504c74c7a
Author: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Date: Fri May 15 11:51:50 2015 +0300
drm/i915: Preserve ddi_pll_sel when allocating new pipe_config
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=91628
Cc: stable@vger.kernel.org # 7e6313a251 drm/i915: Don't use link_bw for PLL setup
Cc: stable@vger.kernel.org
Cc: Timo Aaltonen <tjaalton@ubuntu.com>
Cc: Luciano Coelho <luciano.coelho@intel.com>
Signed-off-by: Ander Conselvan de Oliveira <ander.conselvan.de.oliveira@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Use port_clock instead of link_bw when picking the PLL parameters for
DP. link_bw may be zero with an eDP 1.4 sink that supports
DP_LINK_RATE_SET so we shouldn't use it for anything other than feed it
to the sink appropriately.
v2: Fix typo in commit message (Sivakumar)
Reviewed-by: Sivakumar Thulasimani <sivakumar.thulasimani@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
[Jani: cherry-picked from future.]
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Applications like gnome-shell may try to render after dropping master
privileges. Since the driver should now be safe against this scenario,
allow those applications to use their legacy node like a render node.
v2: Add missing return statement.
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Sinclair Yeh <syeh@vmware.com>
Commit ec9f932ed4
"drm/atomic: Cleanup on error properly in the atomic ioctl."
cleaned up some error paths, but didn't fix the TEST_ONLY path.
In the check only case plane->fb shouldn't be updated, and
the vblank events should be cleared as on failure.
Changes since v1:
- Fix -EDEADLK handling of vblank events too.
- Free state last with CHECK_ONLY.
Changes since v2:
- Add comment about freeing crtc_state->event with TEST_ONLY.
(Daniel Stone)
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
User visible:
- Add ability to specify to select which registers to record,
to reduce the size of perf.data files, and also allow printing
the registers in 'perf script': (Stephane Eranian)
# perf record --intr-regs=AX,SP usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (8 samples) ]
# perf script -F ip,sym,iregs | tail -5
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff81761ac0 _raw_spin_lock AX:0xffff8801bfcf8020 SP:0xffff8802629c3ce8
ffffffff81202bf8 __vma_adjust_trans_huge AX:0x7ffc75200000 SP:0xffff8802629c3b30
ffffffff8122b089 dput AX:0x101 SP:0xffff8802629c3c78
#
Infrastructure:
- Open event on evsel cpus and threads (Kan Liang)
- New bpf API to get name from a BPF object (Wang Nan)
Build fixes:
- Fix build on powerpc broken by pt/bts (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=unM7
-----END PGP SIGNATURE-----
Merge tag 'perf-core-for-mingo' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux into perf/urgent
Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:
User visible changes:
- Add ability to specify to select which registers to record,
to reduce the size of perf.data files, and also allow printing
the registers in 'perf script': (Stephane Eranian)
# perf record --intr-regs=AX,SP usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.016 MB perf.data (8 samples) ]
# perf script -F ip,sym,iregs | tail -5
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff8105f42a native_write_msr_safe AX:0xf SP:0xffff8802629c3c00
ffffffff81761ac0 _raw_spin_lock AX:0xffff8801bfcf8020 SP:0xffff8802629c3ce8
ffffffff81202bf8 __vma_adjust_trans_huge AX:0x7ffc75200000 SP:0xffff8802629c3b30
ffffffff8122b089 dput AX:0x101 SP:0xffff8802629c3c78
#
Infrastructure changes:
- Open event on evsel cpus and threads. (Kan Liang)
- Add new bpf API to get name from a BPF object. (Wang Nan)
Build fixes:
- Fix build on powerpc broken by pt/bts. (Adrian Hunter)
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
So the drivers can be compiled with CONFIG_RESET_CONTROLLER disabled.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Commit 92122789b2 ("drm/i915: preserve SSC if previously set v3")
added code to intel_modeset_gem_init to override the SSC status read
from VBT with the SSC status set by BIOS.
However, intel_modeset_gem_init is invoked *after* intel_modeset_init,
which calls intel_setup_outputs, which *modifies* SSC status by way of
intel_init_pch_refclk. So unlike advertised, intel_modeset_gem_init
doesn't preserve the SSC status set by BIOS but whatever
intel_init_pch_refclk decided on.
This is a problem on dual gpu laptops such as the MacBook Pro which
require either a handler to switch DDC lines, or the discrete gpu
to proxy DDC/AUX communication: Both the handler and the discrete
gpu may initialize after the i915 driver, and consequently, an LVDS
connector may initially seem disconnected and the SSC therefore
is disabled by intel_init_pch_refclk, but on reprobe the connector
may turn out to be connected and the SSC must then be enabled.
Due to 92122789b2 however, the SSC is not enabled on reprobe since
it is assumed BIOS disabled it while in fact it was disabled by
intel_init_pch_refclk.
Also, because the SSC status is preserved so late, the preserved value
only ever gets used on resume but not on panel initialization:
intel_modeset_init calls intel_init_display which indirectly calls
intel_panel_use_ssc via multiple subroutines, *before* the BIOS value
overrides the VBT value in intel_modeset_gem_init (intel_panel_use_ssc
is the sole user of dev_priv->vbt.lvds_use_ssc).
Fix this by moving the code introduced by 92122789b2 from
intel_modeset_gem_init to intel_modeset_init before the invocation
of intel_setup_outputs and intel_init_display.
Add a DRM_DEBUG_KMS as suggested way back by Jani:
http://lists.freedesktop.org/archives/intel-gfx/2014-June/046666.html
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=88861
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=61115
Tested-by: Paul Hordiienko <pvt.gord@gmail.com>
[MBP 6,2 2010 intel ILK + nvidia GT216 pre-retina]
Tested-by: William Brown <william@blackhats.net.au>
[MBP 8,2 2011 intel SNB + amd turks pre-retina]
Tested-by: Lukas Wunner <lukas@wunner.de>
[MBP 9,1 2012 intel IVB + nvidia GK107 pre-retina]
Tested-by: Bruno Bierbaumer <bruno@bierbaumer.net>
[MBP 11,3 2013 intel HSW + nvidia GK107 retina -- work in progress]
Fixes: 92122789b2 ("drm/i915: preserve SSC if previously set v3")
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
opts_size is only written and never read. Following patch
removes this unused variable.
Signed-off-by: Pravin B Shelar <pshelar@nicira.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pull NOHZ updates from Ingo Molnar:
"The main changes, mostly written by Frederic Weisbecker, include:
- Fix some jiffies based cputime assumptions. (No real harm because
the concerned code isn't used by full dynticks.)
- Simplify jiffies <-> usecs conversions. Remove dead code.
- Remove early hacks on nohz full code that avoided messing up idle
nohz internals. Now nohz integrates well full and idle and such
hack have become needless.
- Restart nohz full tick from irq exit. (A simplification and a
preparation for future optimization on scheduler kick to nohz
full)
- Code cleanups.
- Tile driver isolation enhancement on top of nohz. (Chris Metcalf)"
* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz: Remove useless argument on tick_nohz_task_switch()
nohz: Move tick_nohz_restart_sched_tick() above its users
nohz: Restart nohz full tick from irq exit
nohz: Remove idle task special case
nohz: Prevent tilegx network driver interrupts
alpha: Fix jiffies based cputime assumption
apm32: Fix cputime == jiffies assumption
jiffies: Remove HZ > USEC_PER_SEC special case
Pull scheduler fix from Ingo Molnar:
"This is a leftover scheduler fix from the v4.2 cycle"
* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Fix cpu_active_mask/cpu_online_mask race
Pull scheduler updates from Ingo Molnar:
"The biggest change in this cycle is the rewrite of the main SMP load
balancing metric: the CPU load/utilization. The main goal was to make
the metric more precise and more representative - see the changelog of
this commit for the gory details:
9d89c257df ("sched/fair: Rewrite runnable load and utilization average tracking")
It is done in a way that significantly reduces complexity of the code:
5 files changed, 249 insertions(+), 494 deletions(-)
and the performance testing results are encouraging. Nevertheless we
need to keep an eye on potential regressions, since this potentially
affects every SMP workload in existence.
This work comes from Yuyang Du.
Other changes:
- SCHED_DL updates. (Andrea Parri)
- Simplify architecture callbacks by removing finish_arch_switch().
(Peter Zijlstra et al)
- cputime accounting: guarantee stime + utime == rtime. (Peter
Zijlstra)
- optimize idle CPU wakeups some more - inspired by Facebook server
loads. (Mike Galbraith)
- stop_machine fixes and updates. (Oleg Nesterov)
- Introduce the 'trace_sched_waking' tracepoint. (Peter Zijlstra)
- sched/numa tweaks. (Srikar Dronamraju)
- misc fixes and small cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (44 commits)
sched/deadline: Fix comment in enqueue_task_dl()
sched/deadline: Fix comment in push_dl_tasks()
sched: Change the sched_class::set_cpus_allowed() calling context
sched: Make sched_class::set_cpus_allowed() unconditional
sched: Fix a race between __kthread_bind() and sched_setaffinity()
sched: Ensure a task has a non-normalized vruntime when returning back to CFS
sched/numa: Fix NUMA_DIRECT topology identification
tile: Reorganize _switch_to()
sched, sparc32: Update scheduler comments in copy_thread()
sched: Remove finish_arch_switch()
sched, tile: Remove finish_arch_switch
sched, sh: Fold finish_arch_switch() into switch_to()
sched, score: Remove finish_arch_switch()
sched, avr32: Remove finish_arch_switch()
sched, MIPS: Get rid of finish_arch_switch()
sched, arm: Remove finish_arch_switch()
sched/fair: Clean up load average references
sched/fair: Provide runnable_load_avg back to cfs_rq
sched/fair: Remove task and group entity load when they are dead
sched/fair: Init cfs_rq's sched_entity load average
...
Pull RAS updates from Ingo Molnar:
"MCE handling updates, but also some generic drivers/edac/ changes to
better organize the Kconfig space"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras: Move AMD MCE injector to arch/x86/ras/
x86/mce: Add a wrapper around mce_log() for injection
x86/mce: Rename rcu_dereference_check_mce() to mce_log_get_idx_check()
RAS: Add a menuconfig option with descriptive text
x86/mce: Reenable CMCI banks when swiching back to interrupt mode
x86/mce: Clear Local MCE opt-in before kexec
x86/mce: Remove unused function declarations
x86/mce: Kill drain_mcelog_buffer()
x86/mce: Avoid potential deadlock due to printk() in MCE context
x86/mce: Remove the MCE ring for Action Optional errors
x86/mce: Don't use percpu workqueues
x86/mce: Provide a lockless memory pool to save error records
x86/mce: Reuse one of the u16 padding fields in 'struct mce'
Pull perf updates from Ingo Molnar:
"Main perf kernel side changes:
- uprobes updates/fixes. (Oleg Nesterov)
- Add PERF_RECORD_SWITCH to indicate context switches and use it in
tooling. (Adrian Hunter)
- Support BPF programs attached to uprobes and first steps for BPF
tooling support. (Wang Nan)
- x86 generic x86 MSR-to-perf PMU driver. (Andy Lutomirski)
- x86 Intel PT, LBR and BTS updates. (Alexander Shishkin)
- x86 Intel Skylake support. (Andi Kleen)
- x86 Intel Knights Landing (KNL) RAPL support. (Dasaratharaman
Chandramouli)
- x86 Intel Broadwell-DE uncore support. (Kan Liang)
- x86 hw breakpoints robustization (Andy Lutomirski)
Main perf tooling side changes:
- Support Intel PT in several tools, enabling the use of the
processor trace feature introduced in Intel Broadwell processors:
(Adrian Hunter)
# dmesg | grep Performance
# [0.188477] Performance Events: PEBS fmt2+, 16-deep LBR, Broadwell events, full-width counters, Intel PMU driver.
# perf record -e intel_pt//u -a sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.216 MB perf.data ]
# perf script # then navigate in the tool output to some area, like this one:
184 1030 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba661440 dl_main (/usr/lib64/ld-2.17.so)
185 1457 dl_main (/usr/lib64/ld-2.17.so) => 7f21ba669f10 _dl_new_object (/usr/lib64/ld-2.17.so)
186 9f37 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba677b90 strlen (/usr/lib64/ld-2.17.so)
187 7ba3 strlen (/usr/lib64/ld-2.17.so) => 7f21ba677c75 strlen (/usr/lib64/ld-2.17.so)
188 7c78 strlen (/usr/lib64/ld-2.17.so) => 7f21ba669f3c _dl_new_object (/usr/lib64/ld-2.17.so)
189 9f8a _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba65fab0 calloc@plt (/usr/lib64/ld-2.17.so)
190 fab0 calloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e70 calloc (/usr/lib64/ld-2.17.so)
191 5e87 calloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa90 malloc@plt (/usr/lib64/ld-2.17.so)
192 fa90 malloc@plt (/usr/lib64/ld-2.17.so) => 7f21ba675e60 malloc (/usr/lib64/ld-2.17.so)
193 5e68 malloc (/usr/lib64/ld-2.17.so) => 7f21ba65fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so)
194 fa80 __libc_memalign@plt (/usr/lib64/ld-2.17.so) => 7f21ba675d50 __libc_memalign (/usr/lib64/ld-2.17.so)
195 5d63 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e20 __libc_memalign (/usr/lib64/ld-2.17.so)
196 5e40 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675d73 __libc_memalign (/usr/lib64/ld-2.17.so)
197 5d97 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675e18 __libc_memalign (/usr/lib64/ld-2.17.so)
198 5e1e __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba675df9 __libc_memalign (/usr/lib64/ld-2.17.so)
199 5e10 __libc_memalign (/usr/lib64/ld-2.17.so) => 7f21ba669f8f _dl_new_object (/usr/lib64/ld-2.17.so)
200 9fc2 _dl_new_object (/usr/lib64/ld-2.17.so) => 7f21ba678e70 memcpy (/usr/lib64/ld-2.17.so)
201 8e8c memcpy (/usr/lib64/ld-2.17.so) => 7f21ba678ea0 memcpy (/usr/lib64/ld-2.17.so)
- Add support for using several Intel PT features (CYC, MTC packets),
the relevant documentation was updated in:
tools/perf/Documentation/intel-pt.txt
briefly describing those packets, its purposes, how to configure
them in the event config terms and relevant external documentation
for further reading. (Adrian Hunter)
- Introduce support for probing at an absolute address, for user and
kernel 'perf probe's, useful when one have the symbol maps on a
developer machine but not on an embedded system. (Wang Nan)
- Add Intel BTS support, with a call-graph script to show it and PT
in use in a GUI using 'perf script' python scripting with
postgresql and Qt. (Adrian Hunter)
- Allow selecting the type of callchains per event, including
disabling callchains in all but one entry in an event list, to save
space, and also to ask for the callchains collected in one event to
be used in other events. (Kan Liang)
- Beautify more syscall arguments in 'perf trace': (Arnaldo Carvalho
de Melo)
* A bunch more translate file/pathnames from pointers to strings.
* Convert numbers to strings for the 'keyctl' syscall 'option'
arg.
* Add missing 'clockid' entries.
- Introduce 'srcfile' sort key: (Andi Kleen)
# perf record -F 10000 usleep 1
# perf report --stdio --dsos '[kernel.vmlinux]' -s srcfile
<SNIP>
# Overhead Source File
26.49% copy_page_64.S
5.49% signal.c
0.51% msr.h
#
It can be combined with other fields, for instance, experiment with
'-s srcfile,symbol'.
There are some oddities in some distros and with some specific
DSOs, being investigated, so your mileage may vary.
- Support per-event 'freq' term: (Namhyung Kim)
$ perf record -e 'cpu/instructions,freq=1234/',cycles -c 1000 sleep 1
$ perf evlist -F
cpu/instructions,freq=1234/: sample_freq=1234
cycles: sample_period=1000
$
- Deref sys_enter pointer args with contents from probe:vfs_getname,
showing pathnames instead of pointers in many syscalls in 'perf
trace'. (Arnaldo Carvalho de Melo)
- Stop collecting /proc/kallsyms in perf.data files, saving about
4.5MB on a typical x86-64 system, use the the symbol resolution
routines used in all the other tools (report, top, etc) now that we
can ask libtraceevent to use perf's symbol resolution code.
(Arnaldo Carvalho de Melo)
- Allow filtering out of perf's PID via 'perf record --exclude-perf'.
(Wang Nan)
- 'perf trace' now supports syscall groups, like strace, i.e:
$ trace -e file touch file
Will expand 'file' into multiple, file related, syscalls. More
work needed to add extra groups for other syscall groups, and also
to complement what was added for the 'file' group, included as a
proof of concept. (Arnaldo Carvalho de Melo)
- Add lock_pi stresser to 'perf bench futex', to test the kernel code
related to FUTEX_(UN)LOCK_PI. (Davidlohr Bueso)
- Let user have timestamps with per-thread recording in 'perf record'
(Adrian Hunter)
- ... and tons of other changes, see the shortlog and the Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (240 commits)
perf evlist: Add backpointer for perf_env to evlist
perf tools: Rename perf_session_env to perf_env
perf tools: Do not change lib/api/fs/debugfs directly
perf tools: Add tracing_path and remove unneeded functions
perf buildid: Introduce sysfs/filename__sprintf_build_id
perf evsel: Add a backpointer to the evlist a evsel is in
perf trace: Add header with copyright and background info
perf scripts python: Add new compaction-times script
perf stat: Get correct cpu id for print_aggr
tools lib traceeveent: Allow for negative numbers in print format
perf script: Add --[no-]-demangle/--[no-]-demangle-kernel
tracing/uprobes: Do not print '0x (null)' when offset is 0
perf probe: Support probing at absolute address
perf probe: Fix error reported when offset without function
perf probe: Fix list result when address is zero
perf probe: Fix list result when symbol can't be found
tools build: Allow duplicate objects in the object list
perf tools: Remove export.h from MANIFEST
perf probe: Prevent segfault when reading probe point with absolute address
perf tools: Update Intel PT documentation
...
Pull x86/kasan changes from Ingo Molnar:
"These are two KASAN changes that factor out (and generalize) x86
specific KASAN code from x86 to mm"
* 'mm-kasan-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kasan, mm: Introduce generic kasan_populate_zero_shadow()
x86/kasan: Define KASAN_SHADOW_OFFSET per architecture
Pull liblockdep fixes from Ingo Molnar:
"Three liblockdep fixes left over from the v4.2 cycle"
* 'locking-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tools/liblockdep: Use the rbtree header provided by common tools headers
tools/liblockdep: Correct macro for WARN
tools: Restore export.h
* device-properties:
device property: check fwnode type in to_of_node()
device property: attach 'else if' to the proper 'if'
device property: fallback to pset when gettng one string
device property: fix potential NULL pointer dereference
* acpi-pm:
ACPI / bus: Move duplicate code to a separate new function
mfd: Add support for Intel Sunrisepoint LPSS devices
dmaengine: add a driver for Intel integrated DMA 64-bit
mfd: make mfd_remove_devices() iterate in reverse order
driver core: implement device_for_each_child_reverse()
klist: implement klist_prev()
Driver core: wakeup the parent device before trying probe
ACPI / PM: Attach ACPI power domain only once
PM / QoS: Make it possible to expose device latency tolerance to userspace
ACPI / PM: Update the copyright notice and description of power.c
Pull inlining tuning from Ingo Molnar:
"A handful of inlining optimizations inspired by x86 work but
applicable in general"
* 'core-types-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jiffies: Force inlining of {m,u}msecs_to_jiffies()
x86/hweight: Force inlining of __arch_hweight{32,64}()
linux/bitmap: Force inlining of bitmap weight functions
* acpica: (42 commits)
ACPICA: Update version to 20150818
ACPICA: Debugger: Cleanup debugging outputs to dump name path without trailing underscores
ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_verbose acpiexec usage
ACPICA: Disassembler: Cleanup acpi_gbl_db_opt_disasm
ACPICA: Debugger: Split debugger initialization/termination APIs
ACPICA: Header support to improve compatibility with MSVC
ACPICA: Make the max-number-of-loops runtime configurable
ACPICA: Debugger: Add option to display namespace summary/counts
ACPICA: Add additional debug info/statements
ACPICA: Table handling: Cleanup and update debug output for tools
ACPICA: acpiexec/acpinames: Support very large number of ACPI tables
ACPICA: acpinames: Add new options and wildcard support
ACPICA: Headers: Fix some comments, no functional change
ACPICA: Tables: Cleanup to reduce FACS globals
ACPICA: Tables: Fix global table list issues by removing fixed table indexes
ACPICA: Update info messages during ACPICA init
ACPICA: Disassembler: Update for new listing mode
ACPICA: Update parameter validation for data_table_region and load_table
ACPICA: Disassembler: Remove duplicate code in _PLD processing.
ACPICA: Correctly cleanup after a ACPI table load failure
...
In the event of an icmp packet, take only the ports instead of trying to
grab the full header.
In the event of an inverse packet, use the source address and port.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In the event of an icmp packet, take only the ports instead of trying to
grab the full header.
In the event of an inverse packet, use the source address and port.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
In the event of an icmp packet, take only the ports instead of trying to
grab the full header.
In the event of an inverse packet, use the source address and port.
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
Check the header for icmp before sending a PACKET_TOO_BIG
Signed-off-by: Alex Gartrell <agartrell@fb.com>
Acked-by: Julian Anastasov <ja@ssi.bg>
Signed-off-by: Simon Horman <horms@verge.net.au>
