Add binding for the Qualcomm SC8280XP Global Clock controller.
The clock-names property is purposefully omitted, to clearly communicate
to the writer (and reader) of the DeviceTree source based on this
binding that the order of "clocks" is significant, in contrast to
previous GCC bindings.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220505025457.1693716-2-bjorn.andersson@linaro.org
This contains a few fixes for the sc8180x interconnect provider driver to make
it functional.
* icc-sc8180x
dt-bindings: interconnect: Add SC8180X QUP0 virt provider
interconnect: qcom: sc8180x: Modernize sc8180x probe
interconnect: qcom: sc8180x: Fix QUP0 nodes
interconnect: qcom: sc8180x: Mark some BCMs keepalive
Link: https://lore.kernel.org/r/20220503211925.1022169-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The QUP0 BCM relates to some internal property of the QUPs, and should
be configured independently of the path to the QUP. In line with other
platforms expose QUP_CORE endpoints in order allow this configuration.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220503211925.1022169-4-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
-----BEGIN PGP SIGNATURE-----
iQJPBAABCAA5FiEEBd4DzF816k8JZtUlCx85Pw2ZrcUFAmJ5fREbHGJqb3JuLmFu
ZGVyc3NvbkBsaW5hcm8ub3JnAAoJEAsfOT8Nma3FTdwP/icvr02w0vfY+Ae2NEI2
gS836xXJWTXMxj2rW4WPQVGzbhNouMfl3yGVV0LxUrkD7pkcXAtCFul/DYJoZSTT
ubnh4v/Axl7YVW5JwlL/+k3BEi39rSupa9HfEyLM5jVq39a0G9TqugVm9KmimIfL
UEMN5pR0ZPLmMrQXzNSSw9uqHuBdr7G+25MMb2yyW8GoxMYE8xcVz0Syz5Xomv6V
DHxl3jgvx7An7x1MbbbSyEOtkIjMtTSqzrRil7Y4g9Q1YTum74r4q/vKqfW+IMpz
fNFz/sqpgy/9ixNtCIE3L1l/YakgHod8bm0DRBCVknEziYNhLIfbDqq3IksySitQ
2ofoolp0Ip7eryHe47HBTzxnDKnfCG8iwaOPgbbtar6Ru32os8C9VbtNRBtZIzMN
NpEqtlaJC+m4U92TlnCqsfKrWDYGdVWQeXU2/rU5QEFYtIGqP8fKLwEQbF/yls75
j/57xtDVheoJbn79ELHCon3PumdpB5XhDLQgIji5jDl+D3rMOYxq86M1f2yF0zqF
34EvwLoy2syY1dlelvECso3Zihszk1RQfEInuwN9RrLyXGXSqUDkODV49pR16URz
ZRELs9SO99iRS5fjWzA0qoCWKS5hBu2GDnGr3Pv8gHBNGAJKKhTHSJLq+/q7aLTs
9ApGB1PzsZiBv8LMF37El0L4
=cBVa
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=MmN1
-----END PGP SIGNATURE-----
Merge tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/dt
Qualcomm ARM64 DT updates for v5.19
This adds MDIO bus description on the IPQ6018 platform.
On MSM8916 the BAM-DMUX WWAN network device is added and the Huawei
Ascend G7 gains sound card definition and clarified installation
instructions.
MSM8992 and MSM8994 continues to be worked on, gaining multimedia clock
controller, on-chip memory, watchdog and various cleanup changes. The
Xiaomi Mi 4C gains CPU regulators and fixes to the framebuffer
definition, while Huawei Nexus 6P gains eMMC support.
On MSM8996 the modem and sensor remtoeprocs are added and enabled in the
Dragonboard 820c and the Xiaomi devices.
On MSM8998 a few newly added clocks related to the sensor subsystem bus
are marked as protected by default and the OnePlus devices gains NFC.
The SC7180 platform and devices thereon are further polished and
limozeen moves to using edp-panel for EDID-based detection, over
statically defined panels.
On SC7280 GPI DMA, WiFi remoteproc and network device, LPASS audio
clocks, resets for SDCC controllers and a new CRD revision are added. A
supply glitch on the PCIe power and a current leak for Bluetooth during
suspend are corrected. The Herobrine board gains eDP support and the IDP
gains backlight. USB is marked wakeup capable.
On SDM845 the IPA, WLED based backlight and second WiFi channel are
enabled for Xiaomi Pocophone F1, the firmware name is modified to not
conflict with other boards. On RB3 the CAN bus controller is added and
the WiFi calibration variant is defined to allow adding the board's
calibration information into linux-firmware.
SM6350 gains I2C busses, UFS and WiFi support, and the numbering of
uart9 is corrected.
On SM7225 and the Fairphone 4 UFS, WiFi and haptics are enabled.
On SM8150 PCIe, Ethernet and uSD card support is added, and enabled for
the SA8155p ADP board. The PDC interrupt controller is also added and
described as wakup interrupt parent for TLMM.
Camera subsystem and control interface are defined for SM8250. On the
Sony Xperia 1 II the audio amplifiers are enabled.
On SM8350 GPI DMA engines are added and linked to the I2C and SPI
serial engines. Surface Duo 2 gains battery charger support.
On SM8450 the two PCIe controller/PHYs are enabled, GPI DMA and QUP
serial engine instances are added. Remoteproc instances are enabled on
SM8450 HDK.
Last, but not least, a number of DeviceTree validation errors across
various boards are corrected.
* tag 'qcom-arm64-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (150 commits)
arm64: dts: qcom: Only include sc7180.dtsi in sc7180-trogdor.dtsi
arm64: dts: qcom: sc7180-trogdor: Simplify spi0/spi6 labeling
arm64: dts: qcom: sc7180-trogdor: Simplify trackpad enabling
arm64: dts: qcom: sc7280: eDP for herobrine boards
arm64: dts: qcom: sa8155p-adp: Disable multiple Tx and Rx queues for ethernet IP
arm64: dts: qcom: sm8150: Fix iommu sid value for SDC2 controller
arm64: dts: qcom: sm8350-duo2: enable battery charger
arm64: dts: qcom: Enable pm8350c pwm for sc7280-idp2
arm64: dts: qcom: pm8350c: Add pwm support
arm64: dts: qcom: sc7280-qcard: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7280-idp: Configure CTS pin to bias-bus-hold for bluetooth
arm64: dts: qcom: sc7180: Remove ipa interconnect node
arm64: dts: qcom: sc7280-idp: Enable GPI DMAs
arm64: dts: qcom: sc7280: Add GENI I2C/SPI DMA channels
arm64: dts: qcom: sc7280: Add GPI DMAengines
arm64: dts: qcom: sm8450: Fix qmp phy node (use phy@ instead of lanes@)
arm64: dts: qcom: db845c: Add support for MCP2517FD
arm64: dts: qcom: qrb5165-rb5: Fix can-clock node name
arm64: dts: qcom: sc7280: Add SAR sensors to herobrine crd
arm64: dts: qcom: sm8250: camss: Add CCI definitions
...
Link: https://lore.kernel.org/r/20220509204451.325675-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
-----BEGIN PGP SIGNATURE-----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=/Dqp
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=rjVH
-----END PGP SIGNATURE-----
Merge tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into arm/drivers
Qualcomm driver updates for v5.19
This converts a wide range of Qualcomm-related DeviceTree bindings to
YAML, in order to improve our ability to validate the DeviceTree source.
The RPMh power-domain driver gains support for the modem platform SDX65,
the compute platform SC8280XP and the automotive platform SA8540p. While
LLCC gains support for SC8180X and SC8280XP and gains a
MODULE_DEVICE_TABLE() to make it functional as a module.
It adds a driver for configuring the SSC bus, providing Linux access to
the hardware blocks in the sensor subsystem.
The socinfo driver gets confusion related to MSM8974 Pro sorted out and
adds new ids for SM8540 and SC7280.
The SCM driver gains support for MSM8974.
Add missing of_node_put() in smp2p and smsm drivers.
Stop using iterator after list_for_each_entry() and define static
definitions as such, in the PDR driver.
* tag 'qcom-drivers-for-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (33 commits)
soc: qcom: pdr: use static for servreg_* variables
soc: qcom: llcc: Add sc8180x and sc8280xp configurations
dt-bindings: arm: msm: Add sc8180x and sc8280xp LLCC compatibles
soc: qcom: rpmhpd: add sc8280xp & sa8540p rpmh power-domains
soc: qcom: rpmhpd: Don't warn about sparse rpmhpd arrays
dt-bindings: power: rpmpd: Add sc8280xp RPMh power-domains
spi: dt-bindings: qcom,spi-geni-qcom: convert to dtschema
soc: qcom: socinfo: Sort out 8974PRO names
dt-bindings: soc: qcom,smp2p: convert to dtschema
dt-bindings: qcom: geni-se: Update UART schema reference
dt-bindings: qcom: geni-se: Update I2C schema reference
dt-bindings: soc: qcom,rpmh-rsc: convert to dtschema
bus: add driver for initializing the SSC bus on (some) qcom SoCs
dt-bindings: bus: add device tree bindings for qcom,ssc-block-bus
dt-bindings: qcom: qcom,geni-se: refer to dtschema for SPI
dt-bindings: soc: qcom,smd: convert to dtschema
firmware: qcom_scm: Add compatible for MSM8976 SoC
dt-bindings: firmware: qcom-scm: Document msm8976 bindings
soc: qcom: smem: validate fields of shared structures
soc: qcom: smem: map only partitions used by local HOST
...
Link: https://lore.kernel.org/r/20220509181839.316655-1-bjorn.andersson@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAmJ3IvYUHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM6lhwf7BpYDyiaYHBKQLXWWDZj1QanO6bjM
fMlxvVdggfeLW6ijerCb+wf2jNQY75lWRRny4x4WWP+sSVZ4u9SUJlxLrwo/aWYr
44KWWr4PkSMDm5j2bQyy8S9o01ZpxT/FOqqTC51PwgMx7yxB7+d1Z1txWwp5W0jB
Ps92O4bKRfvCCF7Mgjw3/FDu5iek6+9pHx5dQxQ1CWPuvVJos6M9Ktkv27x3oOvI
S4v6Y7v5m1WxSjUK2p09pIGP9AJrHhmRNJF3R/ZrXqUKAlpCQFK6DwZ9mY/rfcfj
tPoqCwj9/UmzG+GlBo8z7I2GQmF7vmwH6bqjP/T6SHOoxE9/fiqT2Swc5A==
=S4x7
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----
iQIzBAABCgAdFiEEo6/YBQwIrVS28WGKmmx57+YAGNkFAmJ5g1gACgkQmmx57+YA
GNmd7A/7BR8AlCUX1H5SrWAiJbu0iR64vXRG+K6iqvEQV99K8zivQ7Sg6D+EwonR
YiLFOGTkk3O2hfZWbamNGDxmYrcjC5Kg3Zo0ZMJ2Cg91oBNB5olK/9hKOyrIfPMH
JTZJ/7n7nFi5xUFKBcof3VwNsqsHDp7XGl+jD7la8Dd9m4Yytofz3L4YxQLAkLhU
fobCmW/Nb9QxoKJL1aa+ix0HzZc00cvnUD3CqxFmqamJVJiPPnLFh+VgvDc1vP2P
q0bYvXuqL3lXVVbbi3jHqVldCwyzx7egcv72q33yGQPSaNEJ04jV/JUEz6sIj2XI
HfoQ5iyqczLPZMvJQiXxBsAy9wxde+qoMUwq7OvkLBBF+xEbwrkvp3wTElySRA6Y
YjP8nf39vuQ7qT9Lj4vNBJvQDoLbrKw+xEnFxjmCdJWgdqxVD0yVnPLjCFvmtFfl
/b3g8CePnUwupaI4K8nmo9dvMG46oe7xA86M6KphYdIUg0NVB+/kmxMnwSLBZ3Qz
HRIUyeqV6knzMo413GsQSe9zCiMRcsuDiQ8xHwe5Ko0P8Kr3kyPFX6ofv5D5I54W
leog0kQU/eYXMEveCqIaxjUFRb9SE8UY9SK//mAqzreLNFT896yG5GeD0WzRxwQl
oxtn+DdzpRHdjiDnS2OC4v22BvxVb3qLr0rVlCC1V3KFalxyRjU=
=2GwC
-----END PGP SIGNATURE-----
Merge tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/drivers
i.MX drivers update for 5.19:
- A series from Lucas and Paul to update GPCv2 driver for i.MX8MP power
domains, and add HSIO and HDMI block control support.
* tag 'imx-drivers-5.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
soc: imx: fix semicolon.cocci warnings
soc: imx: add i.MX8MP HDMI blk-ctrl
soc: imx: imx8m-blk-ctrl: Add i.MX8MP media blk-ctrl
soc: imx: add i.MX8MP HSIO blk-ctrl
dt-bindings: power: imx8mp: add defines for HDMI blk-ctrl domains
dt-bindings: soc: Add i.MX8MP media block control DT bindings
soc: imx: imx8m-blk-ctrl: set power device name
soc: imx: gpcv2: add support for i.MX8MP power domains
soc: imx: gpcv2: add PGC control register indirection
Link: https://lore.kernel.org/r/20220508033843.2773685-2-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.
-----BEGIN PGP SIGNATURE-----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=KBZh
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=wsbV
-----END PGP SIGNATURE-----
Merge tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/dt
arm64: tegra: Device tree changes for v5.19-rc1
This adds some improvements on Tegra234 (QSPI, CCPLEX), improves the
SDMMC clock speed on Tegra194 and adds the ASRC audio block on various
chip generations. Memory controller channels are also added on Tegra186
and later and the missing DFLL reset is added for Tegra210.
* tag 'tegra-for-5.19-arm64-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add missing DFLL reset on Tegra210
arm64: tegra: Add memory controller channels
arm64: tegra: Enable ASRC on various platforms
arm64: tegra: Add ASRC device on Tegra186 and later
arm64: tegra: Update PWM fan node name
arm64: tegra: Add node for Tegra234 CCPLEX cluster
arm64: tegra: Add QSPI controllers on Tegra234
arm64: tegra: Update SDMMC1/3 clock source for Tegra194
Link: https://lore.kernel.org/r/20220506143005.3916655-5-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYnTmCAAKCRCKwlD9ZEnx
cNXAAP4zWJnWNezZM//dRYwLHALSOE5x22y+MJyiDYDPO2Z0FgD+LcVO1AV+FEqN
/vFkQRBThrdcARFqc44lSYGj2f2+kgg=
=L6Mz
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=3n4A
-----END PGP SIGNATURE-----
Merge tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/dt
Renesas ARM DT updates for v5.19 (take two)
- I2C, sound, USB, CANFD, timer, watchdog, (Q)SPI, cpufreq, and
thermal support for the RZ/G2UL SoC and the RZ/G2UL SMARC EVK
development board,
- Initial support for the R-Car V4H SoC and the Renesas White Hawk
development board stack,
- DMA, RTC, and USB support for the RZ/N1D SoC,
- Initial support for the RZ/V2M SoC an the RZ/V2M Evaluation Kit
Board,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.19-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (40 commits)
arm64: dts: renesas: Add initial device tree for RZ/V2M EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2M SoC
arm64: dts: renesas: r8a779a0: Update to R-Car Gen4 compatible values
ARM: dts: r9a06g032: Link the PCI USB devices to the USB PHY
ARM: dts: r9a06g032: Add USB PHY DT support
ARM: dts: r9a06g032: Add internal PCI bridge node
ARM: dts: r9a06g032: Describe the RTC
arm64: dts: renesas: Add interrupt-names to CANFD nodes
arm64: dts: renesas: r9a07g043: Add SPI Multi I/O Bus controller node
arm64: dts: renesas: r9a07g043: Create thermal zone to support IPA
arm64: dts: renesas: r9a07g043: Add TSU node
arm64: dts: renesas: r9a07g043: Add OPP table
arm64: dts: renesas: r9a07g043: Add RSPI{0,1,2} nodes
arm64: dts: renesas: r9a07g054: Fix external clk node names
arm64: dts: renesas: r9a07g044: Fix external clk node names
ARM: dts: r9a06g032: Fix the NAND controller node
ARM: dts: r9a06g032: Fill the UART DMA properties
ARM: dts: r9a06g032: Describe the DMA router
ARM: dts: r9a06g032: Add the two DMA nodes
arm64: dts: renesas: Remove empty rgb output endpoints
...
Link: https://lore.kernel.org/r/cover.1651828603.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The RTC section of the H616 manual mentions in a half-sentence the
existence of a clock "32K divided by PLL_PERI(2X)". This is used as
one of the possible inputs for the mux that selects the clock for the
32 KHz fanout pad. On the H616 this is routed to pin PG10, and some
boards use that clock output to compensate for a missing 32KHz crystal.
On the OrangePi Zero2 this is for instance connected to the LPO pin of
the WiFi/BT chip.
The new RTC clock binding requires this clock to be named as one input
clock, so we need to expose this to the DT. In contrast to the D1 SoC
there does not seem to be a gate for this clock, so just use a fixed
divider clock, using a newly assigned clock number.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-3-andre.przywara@arm.com
The H6 and H616 feature an (undocumented) bus clock gate for accessing
the RTC registers. This seems to be enabled at reset (or by the BootROM),
so we got away without it so far, but exists regardless.
Since the new RTC clock binding for the H616 requires this "bus" clock
to be specified in the DT, add this to R_CCU clock driver and expose it
on the DT side with a new number.
We do this for both the H6 and H616, but mark it as IGNORE_UNUSED, as we
cannot reference it in any H6 DTs.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Reviewed-by: Samuel Holland <samuel@sholland.org>
Signed-off-by: Jernej Skrabec <jernej.skrabec@gmail.com>
Link: https://lore.kernel.org/r/20220428230933.15262-2-andre.przywara@arm.com
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYnOhkgAKCRCKwlD9ZEnx
cCbbAQCUh1AapeMlmEvhNIPN7NH5tE6EdpHJcTRrHXOhU1uT5QD/RLavj37xoyU0
W519FwTA0oYGsXCq2yXjQ08DwlrkUg0=
=nWXL
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g011-dt-binding-defs-tag' into renesas-arm-dt-for-v5.19
Renesas RZ/V2M DT Binding Definitions
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
-----BEGIN PGP SIGNATURE-----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=F34o
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=gddr
-----END PGP SIGNATURE-----
Merge tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into arm/dt
STM32 DT for v5.19, round 1
Highlights:
----------
-MCU:
-Fix pinctrl node names to match with pinctrl yaml.
- MPU:
-General:
- Fix pinctrl node names to match with pinctrl yaml.
- Add Protonics boards support based on STM32MP151A SoC:
- PRTT1C - 10BaseT1L switch: mainly embeds a sja1105q switch with
TI and Micrel 10BaseT Phys and wifi support.
- PRTT1S - 10BaseT1L CO2 sensor board: mainly embeds I2C humidity
and CO2 sensors.
- PRTT1A - 10BaseT1L multi functional controller.
- ST boards:
- Add RTC support on stm32mp13.
- Add button and heartbit support on stm32mp13 DK board.
- Add a secure version of STM32MP15 ED1/EV1/DK1/DK2 boards based
on OP-TEE OS and SCMI protocol.
- DH boards:
- Use MCO2 to generate PHY clock and ETHRX clock in order to release
internal PLL for a better SD card usage.
- Add 1ms PHY post-reset on Avenger96 board to match with PHY
requirements.
* tag 'stm32-dt-for-v5.19-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (24 commits)
ARM: dts: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
dt-bindings: arm: stm32: Add SCMI version of STM32 boards (DK1/DK2/ED1/EV1)
ARM: dts: stm32: enable optee firmware and SCMI support on STM32MP15
dt-bindings: reset: stm32mp15: rename RST_SCMI define
dt-bindings: clock: stm32mp15: rename CK_SCMI define
dt-bindings: clock: stm32mp1: describes clocks if "st,stm32mp1-rcc-secure"
dt-bindings: rcc: Add optional external ethernet RX clock properties
ARM: dts: stm32: add UserPA13 button on stm32mp135f-dk
ARM: dts: stm32: add blue led (Linux heartbeat) on stm32mp135f-dk
ARM: dts: stm32: add EXTI interrupt-parent to pinctrl node on stm32mp131
ARM: dts: stm32: add support for Protonic PRTT1x boards
ARM: dts: stm32: stm32mp15-pinctrl: add spi1-1 pinmux group
dt-bindings: net: silabs,wfx: add prt,prtt1c-wfm200 antenna variant
dt-bindings: arm: stm32: Add compatible strings for Protonic T1L boards
dt-bindings: arm: stm32: correct blank lines
dt-bindings: arm: stm32: narrow DH STM32MP1 SoM boards
ARM: dts: stm32: enable RTC support on stm32mp135f-dk
ARM: dts: stm32: add RTC node on stm32mp131
ARM: dts: stm32: Fix PHY post-reset delay on Avenger96
ARM: dts: stm32: fix pinctrl node name warnings (MPU soc)
...
Link: https://lore.kernel.org/r/5818c943-882d-7e50-430d-ae3299a108ee@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYnOhkgAKCRCKwlD9ZEnx
cCbbAQCUh1AapeMlmEvhNIPN7NH5tE6EdpHJcTRrHXOhU1uT5QD/RLavj37xoyU0
W519FwTA0oYGsXCq2yXjQ08DwlrkUg0=
=nWXL
-----END PGP SIGNATURE-----
Merge tag 'renesas-r9a09g011-dt-binding-defs-tag' into renesas-clk-for-v5.19
Renesas RZ/V2M DT Binding Definitions
Clock definitions for the Renesas RZ/V2M (R9A09G011) SoC, shared by
driver and DT source files.
This adds the defines for the power domains provided by the HDMI
blk-ctrl on the i.MX8MP.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The i.MX8MP Media Block Control (MEDIA BLK_CTRL) is a top-level
peripheral providing access to the NoC and ensuring proper power
sequencing of the peripherals within the MEDIAMIX domain. Add DT
bindings for it.
There is already a driver for block controls of other SoCs in the i.MX8M
family, so these bindings will expand upon that.
Signed-off-by: Paul Elder <paul.elder@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Marek Vasut <marex@denx.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The VOP2 unit is found on Rockchip SoCs beginning with rk3566/rk3568.
It replaces the VOP unit found in the older Rockchip SoCs.
This driver has been derived from the downstream Rockchip Kernel and
heavily modified:
- All nonstandard DRM properties have been removed
- dropped struct vop2_plane_state and pass around less data between
functions
- Dropped all DRM_FORMAT_* not known on upstream
- rework register access to get rid of excessively used macros
- Drop all waiting for framesyncs
The driver is tested with HDMI and MIPI-DSI display on a RK3568-EVB
board. Overlay support is tested with the modetest utility. AFBC support
on the cluster windows is tested with weston-simple-dmabuf-egl on
weston using the (yet to be upstreamed) panfrost driver support.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Co-Developed-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
[dt-binding-header:]
Acked-by: Rob Herring <robh@kernel.org>
[moved dt-binding header from dt-nodes patch to here
and made checkpatch --strict happier]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20220422072841.2206452-23-s.hauer@pengutronix.de
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
As we only have one SCMI instance, it's not necessary to add an index to
the name.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Rob Herring <robh@kernel.org>
Add mt8186 iommu binding. "-mm" means the iommu is for Multimedia.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20220503071427.2285-4-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
In mt8195, we have a new IOMMU that is for INFRA IOMMU. its masters
mainly are PCIe and USB. Different with MM IOMMU, all these masters
connect with IOMMU directly, there is no mediatek,larbs property for
infra IOMMU.
Another thing is about PCIe ports. currently the function
"of_iommu_configure_dev_id" only support the id number is 1, But our
PCIe have two ports, one is for reading and the other is for writing.
see more about the PCIe patch in this patchset. Thus, I only list
the reading id here and add the other id in our driver.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-3-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
This patch adds descriptions for mt8195 IOMMU which also use ARM
Short-Descriptor translation table format.
In mt8195, there are two smi-common HW and IOMMU, one is for vdo(video
output), the other is for vpp(video processing pipe). They connects
with different smi-larbs, then some setting(larbid_remap) is different.
Differentiate them with the compatible string.
Something like this:
IOMMU(VDO) IOMMU(VPP)
| |
SMI_COMMON_VDO SMI_COMMON_VPP
--------------- ----------------
| | ... | | ...
larb0 larb2 ... larb1 larb3 ...
Another change is that we have a new IOMMU that is for infra master like
PCIe and USB. The infra master don't have the larb and ports, thus we
rename the port header file to mt8195-memory-port.h rather than
mt8195-larb-port.h.
Also, the IOMMU is not only for MM, thus, we don't call it "m4u" which
means "MultiMedia Memory Management UNIT". thus, use the "iommu" as the
compatiable string.
Signed-off-by: Yong Wu <yong.wu@mediatek.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>
Link: https://lore.kernel.org/r/20220503071427.2285-2-yong.wu@mediatek.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Add DT bindings for the Meson-S4 SoC Reset Controller include file.
Signed-off-by: Zelong Dong <zelong.dong@amlogic.com>
Reviewed-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://lore.kernel.org/r/20220107023931.13251-3-zelong.dong@amlogic.com
clkout1 and clkout2 allow to supply clocks from the SoC to the board,
which is used by some board designs to provide reference clocks.
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Abel Vesa <abel.vesa@nxp.com>
Link: https://lore.kernel.org/r/20220427162131.3127303-1-l.stach@pengutronix.de
Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmZeygAKCRCKwlD9ZEnx
cPnfAQDX43S1p/rL4PVxtumI9NHgZe8O3M1wwoJCW8ZdnM2fRwEA0mT7QDr4MpJr
f9kF/Zh24WgK17cN+tCb3+hWDLCdewE=
=oJ8Z
-----END PGP SIGNATURE-----
Merge tag 'renesas-r8a779g0-dt-binding-defs-tag' into renesas-clk-for-v5.19
Renesas R-Car V4H DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCYmZeygAKCRCKwlD9ZEnx
cPnfAQDX43S1p/rL4PVxtumI9NHgZe8O3M1wwoJCW8ZdnM2fRwEA0mT7QDr4MpJr
f9kF/Zh24WgK17cN+tCb3+hWDLCdewE=
=oJ8Z
-----END PGP SIGNATURE-----
Merge tag 'renesas-r8a779g0-dt-binding-defs-tag' into renesas-arm-dt-for-v5.19
Renesas R-Car V4H DT Binding Definitions
Clock and Power Domain definitions for the Renesas R-Car V4H (R8A779G0)
SoC, shared by driver and DT source files.
The sc8280xp has 13 power-domains controlled through the RPMh, document
the compatible and provide definitions for the power-domains - and their
active-only variants where applicable.
The SA8540p differs slightly in the power domains exposed, so add a
separate compatible for this, but reuse the constants to allow sharing
the DeviceTree source.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20220426233508.1762345-2-bjorn.andersson@linaro.org
This patch adds the new binding documentation for system clock
and functional clock on MediaTek MT8186.
Signed-off-by: Chun-Jie Chen <chun-jie.chen@mediatek.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220409132251.31725-2-chun-jie.chen@mediatek.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
This adds device tree bindings for the externally routed clocks
CLKOUT1 and CLKOUT2 clocks found in the DB8500.
Cc: devicetree@vger.kernel.org
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220414221751.323525-2-linus.walleij@linaro.org
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Adds device tree binding documentation for clocks in the EN7523 SOC.
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Link: https://lore.kernel.org/r/20220314084409.84394-2-nbd@nbd.name
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The RTC reference and MSSPLL were previously not documented or defined,
as they were unused. Add their defines to the PolarFire SoC header.
Fixes: 2145bb687e ("dt-bindings: clk: microchip: Add Microchip PolarFire host binding")
Reviewed-by: Daire McNamara <daire.mcnamara@microchip.com>
Signed-off-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20220413075835.3354193-6-conor.dooley@microchip.com
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Qualcomm SC8280XP platform has the usual set of busses, add a
binding for these interconnect providers and port definitions to allow
interconnect paths to be expressed in the sc8280xp DeviceTree.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220408214835.624494-1-bjorn.andersson@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add definitions of four clocks which need to be manipulated in order to
initialize the AHB bus which exposes the SCC block in the global address
space.
Signed-off-by: Michael Srba <Michael.Srba@seznam.cz>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Link: https://lore.kernel.org/r/20220411072156.24451-2-michael.srba@seznam.cz
