Add the support for enabling optional regulator that may be used as VCC
source.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
[Replaced 'error' variable with 'ret']
[Renamed regulator from 'vcc' to 'power']
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
If MSA is enabled, FPU_REG_WIDTH is 128 rather than 64, then get_fpr64()
/set_fpr64() in the original unaligned instruction emulation code access
the wrong fp registers. This is because the current code doesn't specify
the correct index field, so fix it.
Fixes: f83e4f9896 ("MIPS: Loongson-3: Add some unaligned instructions emulation")
Signed-off-by: Huacai Chen <chenhc@lemote.com>
Signed-off-by: Pei Huang <huangpei@loongson.cn>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Document optional power-supply property that may be used to specify the
regulator powering up the device.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
udf_process_sequence() allocates temporary array for processing
partition descriptors on volume which it fails to free. Free the array
when it is not needed anymore.
Fixes: 7b78fd02fb ("udf: Fix handling of Partition Descriptors")
CC: stable@vger.kernel.org
Reported-by: syzbot+128f4dd6e796c98b3760@syzkaller.appspotmail.com
Signed-off-by: Jan Kara <jack@suse.cz>
Direct backmerge to get commit 88b67edd72 ("dax: Fix compilation for
CONFIG_DAX && !CONFIG_FS_DAX") to fix CI build issues.
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen2.
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
One more device that needs 40d5bb87 to resolve regression for the trackpoint
and three mouse buttons on the type cover of the Lenovo X1 Tablet Gen3.
It is probably also needed for the Lenovo X1 Tablet Gen2 with PID 0x60a3
Signed-off-by: Mikael Wikström <leakim.wikstrom@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Since there is no code that will ever store anything into the dict
ring, remove it. If any future dictionary properties are to be
added, these should be added to the struct printk_info.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-4-john.ogness@linutronix.de
Dictionaries are only used for SUBSYSTEM and DEVICE properties. The
current implementation stores the property names each time they are
used. This requires more space than otherwise necessary. Also,
because the dictionary entries are currently considered optional,
it cannot be relied upon that they are always available, even if the
writer wanted to store them. These issues will increase should new
dictionary properties be introduced.
Rather than storing the subsystem and device properties in the
dict ring, introduce a struct dev_printk_info with separate fields
to store only the property values. Embed this struct within the
struct printk_info to provide guaranteed availability.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/87mu1jl6ne.fsf@jogness.linutronix.de
After commit 9293fcfbc1 ("udf: Remove struct ustr as non-needed
intermediate storage"), the variable ret is being initialized with
'-ENOMEM' that is meaningless. So remove it.
Link: https://lore.kernel.org/r/20200922081322.70535-1-jingxiangfeng@huawei.com
Signed-off-by: Jing Xiangfeng <jingxiangfeng@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
There is an if statement that is indented too deeply, fix this by removing the
extraneous tab.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
The majority of the size of a descriptor is taken up by meta data,
which is often not of interest to the ringbuffer (for example,
when performing state checks). Since descriptors are often
temporarily stored on the stack, keeping their size minimal will
help reduce stack pressure.
Rather than embedding the printk_info into the descriptor, create
a separate printk_info array. The index of a descriptor in the
descriptor array corresponds to the printk_info with the same
index in the printk_info array. The rules for validity of a
printk_info match the existing rules for the data blocks: the
descriptor must be in a consistent state.
Signed-off-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20200918223421.21621-2-john.ogness@linutronix.de
The recent change in lockdep for read lock caused the deadlock
warnings in ALSA control code which uses the read_lock() for
notification and else while write_lock_irqsave() is used for adding
and removing the list entry. Although a deadlock would practically
never hit in a real usage (the addition and the deletion can't happen
with the notification), it's better to fix the read_lock() usage in a
semantically correct way.
This patch replaces the read_lock() calls with read_lock_irqsave()
version for avoiding a reported deadlock. The notification code path
takes the irq disablement in anyway, and other code paths are very
short execution, hence there shouldn't be any big performance hit by
this change.
Fixes: e918188611 ("locking: More accurate annotations for read_lock()")
Reported-by: syzbot+561a74f84100162990b2@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20200922084953.29018-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Correct the name of property for GPIO specifier in GPIO hog.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The RTC on Symphony board does not have its interrupt pin connected to
the SoC, therefore it is not capable of waking up.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
For level low interrupts, enable also internal pull up. It is
required at least on imx8mm-evk, according to schematics.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning:
1. GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE
2. GPIO_ACTIVE_LOW = 1 = IRQ_TYPE_EDGE_RISING
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_LOW => IRQ_TYPE_LEVEL_LOW
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
In case of level low interrupts, enable also internal pull up. It is
required at least on imx8mm-evk, according to schematics.
The schematics for Variscite imx8mm-var-som are not available and
I was unable to get proper configuration from Variscite.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Acked-By: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Conversion of int-gpios into interrupts property requires also
interrupt-parent and uses different flags.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
On LS1088A, watchdog clk are divided by 16, correct it in dts.
Signed-off-by: Zhao Qiang <qiang.zhao@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a pwm-fan mapped to the PWM channel 0 which is connected to the
fan connector of the carrier.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that we have support for GPIO lines of the SMARC connector, enable
LED support on the KBox A-230-LS. There are two LEDs without fixed
functions, one is yellow and one is green. Unfortunately, it is just one
multi-color LED, thus while it is possible to enable both at the same
time it is hard to tell the difference between "yellow only" and "yellow
and green".
Signed-off-by: Michael Walle <michael@walle.cc>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Now that we have support for GPIO lines of the SMARC connector, map the
sleep, power and lid switch signals to the corresponding keys using the
gpio-keys and gpio-keys-polled drivers. The power and sleep signals have
dedicated interrupts, thus we use these ones. The lid switch is just
mapped to a GPIO input and needs polling.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
imx8mq-evk has a MIPI DSI port that can be used to connect a Raydium
RM67191 panel.
Add support for it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Acked-by: Guido Günther <agx@sigxcpu.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a basic DTS for Variscite Symphony evaluation kit with VAR-SOM-MX8MN
(i.MX 8M Nano) System on Module. This brings up the board with basic
functionalities although still few issues remain (e.g. I2C3 and USB OTG
port, although it might not be the problem of DTS).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add DTSI of Variscite VAR-SOM-MX8MN (Nano) System on Module in a basic
version, delivered with Variscite Symphony Evaluation kit. This version
comes with:
- 1 GB of RAM,
- 16 GB eMMC,
- Gigabit Ethernet PHY,
- 802.11 ac/a/b/g/n WiFi with 4.2 Bluetooth,
- CAN bus,
- Audio codec (not yet configured in DTSI).
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Add a binding for the Variscite Symphony evaluation kit board with
VAR-SOM-MX8MN System on Module.
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Define compatible strings for RoseapplePi, a SBC manufactured
in Taiwan, based on Actions Semi S500 reference design.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Update the documentation to add the Caninos Loucos Labrador. Labrador
project consists of the computer on module Core v2 based on the Actions
Semi S500, computer on module Core v3 based on the Actions Semi S700
and the Labrador base boards.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
The Caninos Loucos Program develops Single Board Computers with an open
structure. The Program wants to form a community of developers to use
IoT technologies and disseminate the learning of embedded systems in
Brazil.
It is an initiative of the Technological Integrated Systems Laboratory
(LSI-TEC) with the support of Polytechnic School of the University of
São Paulo (Poli-USP) and Jon "Maddog" Hall.
Signed-off-by: Matheus Castello <matheus@castello.eng.br>
Acked-by: Rob Herring <robh@kernel.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Improved readability by fixing some issues related to maximum line length.
Signed-off-by: Felix Winkler <fxmw.tnt@gmail.com>
Signed-off-by: Niklas Witzel <nik.witzel@horsepower-hannover.de>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
strscpy is preferred over strlcpy and is the standard in the media subsystem.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
modify the return error value is -EDOM
Fixes: 2cac05dee6e30("drm/amd/powerplay: add the hw manager for vega12 (v4)")
Cc: Evan Quan <evan.quan@amd.com>
Signed-off-by: Xiaoliang Pang <dawning.pang@gmail.com>
Reviewed-by: Tianjia Zhang <tianjia.zhang@linux.alibaba.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
commit df561f6688 ("treewide: Use fallthrough pseudo-keyword") from
Gustavo A. R. Silva replaced and standardized /* fallthrough */ comments
with 'fallthrough' pseudo-keyword.
However, in one of the switch-case statements, Coverity Static Analyzer
throws a warning that 'fallthrough' is unreachable due to the adjacent
'return false' statement. (Coverity ID CID 1466511)
In order to fix the unreachable code warning, remove unnecessary
fallthrough keyword.
Signed-off-by: Cengiz Can <cengiz@kernel.wtf>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Address the following issues:
* unnecessary comparison to true/false
* use of 0/1 instead of bool values
* unnecessary conversion to bool
These were fixed using the following Coccinelle scripts:
* scripts/coccinelle/misc/bool{init,conv,return}.cocci
Build-tested with allmodconfig.
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
In a few places in pci/sh_css_params.c, memset is used to zero memory
immediately before it is freed. As none of these structs appear to
contain sensitive information, just remove the calls to memset.
Suggested-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Alex Dewar <alex.dewar90@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
